AAR Not working when dn is different to ddi

I have configured AAR IN CUCM 6.X. When CAC is implemented phones in the branch office can ring some phone at HQ but not others. The phones that they can't reach have ddi's that do not match their 4 digit dn's. These phones that can't be reached over the pstn when cac kicks in. These phones also have single number reach (might be a red herring). I have external phone number mask to represent the full ddi and I have also used the AAR MASK but it still does not work.
I am testing this using a pri tester. I can ring the number over the pstn to the pri tester in normal conditions but when cac is working the branch phone just says not enough bandwidth and as expected the pri tester does not ring.
Any ideas what I am doing wrong.
dn= 1513
ddi 01189335701
aar external mask/phone number used 01189335701

Progress so far:
Got AAR to work adding translation patterns for 1513 to 5701, added this to aar partitions and new aar css including partitions. Added the mask to the aar 01189335701. This worked after adding XXXX instead of 5701 and then added 5701 to the aar mask and it worked ( bit flaky).
Configured single numner reach and now AAR does not work, any ideas

Similar Messages

  • Aironet not working when connected to different IP Subnet

    As per setup B .The Wirless laptops are installed with AppGate client software.If I need to connect to the wirless network, there is AppGate Icon in the desktop of the Laptop.when I click a new window opens asking for 3 login details. Ie..
    Open Connection to
    1)Server: 10.100.100.1
    2)UserName : technician
    3)Password :password
    When I enter the above details it authenticated and gets connected and totally works fine, as per the setup B . When I enter the above details as per the setup A it says failed to connect to host 10.100.100.1. I want to implement the wirless network as per the setup A as shown in the Power Point presentation.
    Please help me with all basic steps with as how to configure the switch and details I need to do for this scenario to work.
    Thanks a Lot

    Hi Rajmohan,
    It will work fine and it also depends on what config u have done in manageable slave switch. I hope these two subnets should be in two separate vlans.
    First u just try by connecting a Laptop/PC directtly to switch in setup B and check whether u r getting ip thro. dhcp.
    Then u chk by connecting AP, without any vlan configuration. Then u just configure one vlan and allow that in ur radio port and put ur management ip of AP in the native vlan.
    Hope this will helps,
    Rgs,

  • Help! Javascript not working when object moved from one page to another!

    Hello all:
    I am new to Adobe Livecycle Designer (version 8.0). I have created a 3 page interactive pdf form with numerous objects (text fields, radio buttons, drop-down boxes, etc.), that our business wants to begin using soon.
    I am having difficulty with some of my Javascript not working with a few of my objects on page 2 of the form. Specifically, there is a drop-down box for "Country" on page 2 of my form. When the user selects, for example, "United States" from the list, I have Javascript that is supposed to change the "Currency" drop-down box rawValue to "US Dollars" accordingly (upon the change event).
    I think my Javascript syntax is proper, but I am not certain. Here is my simple Javascript associated with the "Country" drop-down box (Note: rawValue 80 = "United States" and rawValue 105 = "US Dollars"):
    form1.Page1.cmbContactInfoCountry::change: - (JavaScript, client) -
    if (this.rawValue == 80) {     
         cmbCurrency.rawValue = 105;
    This seems pretty straight forward and it WORKS when my "Country" drop-down box is moved to page 1 of the form, but it WILL NOT WORK when I move the "Country" drop-down box back to page 2 of the form (which is where it belongs).
    Does anyone have any suggestions or solutions? I have spent probably 6-8 hours racking my brain trying to figure out why it works when on one page, but it does not work when move to a different page. I am guessing that I may have corrupted something OR that I am not fully addressing the proper name of the object?
    Please help!
    Frustrated and helpless near Chicago!
    Taylor T

    Hi Jono:
    Thank you for your quick reply.I was able to obtain the full name of the cmbCurrency object using the method you taught me. That is brilliant! Great short-cut tool.
    Unfortunately, I am still having issues with getting Javasript for the cmbCountry object to work with the cmbCurrency object. I haved pasted my new Javascript below.
    JavaScript for cmbCountry object:
    //UNITED STATES
    if (this.rawValue == 1) {
              xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 1;
    else
    //CANADA
    if (this.rawValue == 2) {
              xfa.resolveNode("form1.#subform[1].cmbCurrency").rawValue = 2;
    I have checked the "Specify Item Values" checkbox of the cmbCurrency drop-down object and Value 1 = "US Dollars" and Value 2 = "Canadian Dollars".
    When I select "Canada" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object is changed to "US Dollars" (when it is clearly defined as "Canadian Dollars"). When I select "United States" from the cmbCountry drop-down object, the rawValue of the cmbCurrency drop-down object stays blank for uknown reasons. Very strange.
    Since I am not able to further explain in detail on what I am experiencing, I have posted a link to my file below (I just signed up for an account at ShareFile). I would forever be indebted to you if you can help me figure this out!
    https://thomptk.sharefile.com/?cmd=d&id=07ede2fe11db4549

  • Hyperlinks to pdf files not working when project is exported out as SWF and uploaded to server

    hI all
    I'm using CS5 and i have hyperlinks to pdf files in my indesign project. However when i export to SWF, although the links work locally, they do not work when i upload all the relevant folders and files and test it from a server the links to the pdfs can not be found, the error messages indicates its looking for the files on my hard drive. I have also noticed that if i copy all the relevant folders and files and exported swf to a different directory and then launch swf from there the links do not work there either.
    Other than seperately uploading each pdf indvidually on to the server and then creating a hyperlink to it from the local indesign project i don't know what else to do.
    Any advice much appreciated.

    I have your same problem, but didn't consider uploading the PDFs and then linking to them. I'm willing to try it. Let me know if you ever found a better way, ok?
    Thanks.
    Lynn

  • Output Tray 2 does not work when we print a smartforms document immediately

    Dear printer specialists,
    we've the following issue:
    We are printing the same smartforms document in different plants. One plant decided to get the print output into output tray 2 of the printer (lower tray), so we've copied the standard device type into a z-device type and made the SPAD set-up with a preselection for the tray 2 (lower tray). The new device type has been assigned to the output device. Now we made a test and released the print-output for an immediate printing. The output was printed as before in tray 1 (upper tray). When we restart the output from the spool (SP01), the output will be printed in tray 2. Why does this not work, when we print immediately ? Does anyone know how to solve this problem ? (We don't want to change the smartforms document.)
    Thany you for every information to solve this problem.
    Kind regards, Wolfgang

    HI,
    Check if there is a different tra setting in the smartform itself.
    /nsmartforms -> <Form> -> Pages and Windows -> FIRST, NEXT, TERMCOND -> field Resource Name
    Regards,
    Aidan

  • Thunderbolt ethernet not working when computer wake up from sleep.

    thunderbolt ethernet not working when computer wake up from sleep.
    it will not happen in Mountain loin.

    I had this problem on SL and on Lion as well, and it occures for WiFi and Ethernet connections.
    In fact the internet connection was not broken as I could ping the destination usin the IP (not DNS name).
    In this case the problem was related to mDNSResponder task which handles all dns queries.
    It was the most frequent problem in my day to day work with SL and now Lion. It was never fixed by any patch from Apple. I tried almost all voodoo including fresh install, all possible config changes - no solution.
    The only version with no problems related to network was 10.5.8. All the other versions had issues of different kind (WiFi instability (lost signal), DNS problems (for wireless and wired connection) sometimes associated with machine sleep and wake up and sometimes with no reason.
    QUESTION: Is your problem independent of the access point / router you connect to.
    I must say networking was (and still is) the weakest part, besides the other OS X weaknesses I experienced during 4 years of OS X usage.
    No problems in the same network with Linux or Windows beeing ran natively on my iMac So hardware is OK.
    Software is of poor quality. Not much more to say in this matter.
    I found a very interesting article dated 1996 about programming which I think is still valid.
    Link to the article: http://www.fastcompany.com/magazine/06/writestuff.html
    Below the fragment (with some connection to Apple)
    Software is everything. It also s***s.
    "It's like pre-Sumerian civilization," says Brad Cox, who wrote the software for Steve Jobs NeXT computer and is a professor at George Mason University. "The way we build software is in the hunter-gatherer stage."

  • ExternalInterface not working when swf file is embed inside a dynamically cloned DIV element.

    ExternalInterface not working when swf file is embed inside a dynamically cloned DIV element.
    It seems that flash movie is identifed as 'undefined' inside document.
    //a statically placed div
    var staticdiv=document.getElementById('PropDiv');
    //dynamically placed div with object tag
    var dynDiv =staticdiv.cloneNode( true );
    var xD=50;
    var yD=50;
    if(dynDiv)
    dynDiv.style.display  = "block";
    dynDiv.innerHTML="<object classid=" + "\"clsid:d27cdb6e-ae6d-11cf-96b8-444553540000\"" + "codebase=" +
    "\"http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=7,0,0,0\"" + "width=" + xD + "height=" + yD +
    "id=" + "\"external\"" + "align=" + "\"middle\"" + ">" +
                    "<param name=" + "\"allowScriptAccess\"" + "value=" + "\"sameDomain\"" + "/>" +
                    "<param name=" + "\"movie\"" + "value=" + "\"external.swf\"" + "/>" +
                    "<param name=" + "\"quality\"" + "value=" + "\"high\"" + "/>" +
                    "<param name=" + "\"wmode\"" + "value=" + "\"transparent\"" + "/>" +
                    "<param name=" + "\"bgcolor\"" + "value=" + "\"#ffffff\"" + "/>" +
                    "<embed src=" + "\"external.swf\"" + "quality=" + "\"high\"" + "wmode=" + "\"transparent\"" +"bgcolor=" + "\"#ffffff\""
    + "width=" + xD + "height=" + yD + "name=" + "\"external\"" + "align=" + "\"middle\"" + "allowScriptAccess=" + "\"sameDomain\"" +
    "type=" + "\"application/x-shockwave-flash\"" + "pluginspage=" + "\"http://www.macromedia.com/go/getflashplayer\"" + "/>" +
                    "</object>";
       dynDiv.style.top=50;
       dynDiv.style.left=100;
    document.body.appendChild(dynDiv);
    In above situation communication is not establised when a  funtion which is retruning boolean is called from flash using
    ExternalInterfcae.call.The return value of this function is getting as false inside flash.But the value is true in javascript.
    if (navigator.appName.indexOf("Microsoft") != -1) {
       return window[movieName];
      } else {
       return document[movieName];
    window["external"] is returning as 'undefined'.
    Please give a  solution to solve this.

    Note that you have different file names for the object (images/banner.swf) and the embed (images/banner1.swf)
    You also placed the embed in the middle of a param tag and nested all param tags.
    Because you didn't include a MIME type and the object doesn't have a classid for an ActiveX control for IE, I'm not sure what Firefox will be using.<br />
    The object doesn't have a data attribute to specify the file.<br />
    A separate embed is only needed when you specify a classid in the object.
    <pre><nowiki><div class="bannercontainer">
    <object width="940" height="445" type="application/x-shockwave-flash" data="images/banner.swf" >
    <param name="wmode" value="transparent" />
    <param name="movie" value="images/banner.swf" />
    </object>
    </div></nowiki></pre>

  • Exchange Impersonation not working when applied to group or OU

    I am trying to set up Exchange Impersonation so a specific account can impersonate a group of users. I have successfully set it up and tested to impersonate a single user but it will not work when I apply it to either a distribution group or OU, even though
    Exchange accepts my commands. The commands I'm using are;
    New-ManagementScope -Name ScopeName -RecipientRestrictionFilter { Displayname -eq "All Group Staff"} 
    New-ManagementRoleAssignment -ScopeName  AssignmentName -Role ApplicationImpersonation -User [email protected] -CustomRecipientWriteScope "ScopeName"
    When I try the above for a single user instead of group it works fine. I am using EWSEditor to test. The error I get on the group is;
    The account does not have permission to impersonate the requested user.
    Type: Microsoft.Exchange.WebServices.Data.ServiceResponseException
    Source: Microsoft.Exchange.WebServices
    ErrorCode: ErrorImpersonateUserDenied
    ErrorMessage: The account does not have permission to impersonate the requested user.
    Should I be using a different filter or parameter to get this working for a group of users? Please note I don't want to apply this to all users in the organization.

    Hi,
    Thanks for your response. It's great to hear the good news. What's more, if you have issue with Exchange impersonation, welcome to our Exchange Server Development forum, forum which is staffed by more experts specializing in this kind of problems. Your understanding
    will be appreciated.
    For your convenience:
    https://social.technet.microsoft.com/Forums/exchange/en-US/home?forum=exchangesvrdevelopment
    Hope this can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

  • AS3 not working when uploaded to linux server

    Works like a charm when I preview it but when I upload to the
    server (tried 3 different ones) it just ignore the actionscripts
    all together no matter what I use.
    What I have is a rotating banner system. I set it up to
    randomly start at a specific one. If I preview it locally or run in
    in my .html file locally (just using preview in dreamweaver) it
    works like a charm and starts at a random one. When I upload it it
    just starts at the first one like the actionscripts do not exist.
    Using Flash CS3 and AS3.
    Thanks

    Pretty sure it is not a problem with the upload as I have
    been doing this for years the same way with Dreamweaver. In
    diagnosing the issue I rebuilt it and in place of the movie clips I
    just put text and uploaded it. Worked like a charm. Added the movie
    clips and again does not work when I upload it. Ignores the
    actionscript and just plays them in order. Did a build from top to
    bottom and from bottom to top also. Something in the movie clips is
    causing it but darned if I can find the answer. I have done this
    same thing before and it worked just fine. Just at a loss. I am
    attaching the code inside the movie scripts which work just fine.
    It is just ignoring scripts on the Scene 1 level.

  • 1.call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.

    Hi. please solve my problem.
    .call information such as call waiting,call forwarding, call holding is not working when caller the call me or im wait for my call i cant see any title by iphon , and also holding is the same.2. there is not any option for call baring.3.playback music is not hearing by second partner during the call.4.i cant select ringing ton from saving tons.
    thank you in advance.

    Hi Ersin,
    Exception 1 would seem to be FORMATTING_ERROR, which suggests something in the design of the Smartform.  However, that doesn't fit with the form being generated from a report, but only erroring when called from a function module.  I can think of no reason why the different calling method would be a factor.
    When FORMATTING_ERROR is raise it should also set a message ID and number, are you able to determine what they are?
    Regards,
    Nick

  • Multitouch on track pad not working when running Windows 8 in boot camp

    Does anyone know a work around on how to resolve the issue of more than one fingers on the trackpad? For example, I use one finger to click a window then another finger to slide/move the window to a different location on the screen. This does not work when running Windows 8 in Boot Camp latest version. Any suggestion is much appreciated.

    very very few gestures are supported in windows
    https://discussions.apple.com/message/24548533#24548533
    if it's a limitation from ms you need to contact them
    if it's a limitation from apples drivers you can use feedback channel
    http://www.apple.com/feedback/

  • I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    I bought my iphone 5s a week before and now its volume "up" button is not working when pressed.Does anybody know what to do to make it work?I have a one year warranty.Should i give it to apple retail shop or is there any way to solve this problem?

    IF it is a manufacturing defect and you bought the device from Apple or an authorized Apple retailer, then take it into Apple.

  • Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

    what email service - Yahoo mail have been acting up lately
    you can try setting Mail as your email client - it resolves this pfoblem for some people
    LN

  • Partner function not working when creating PO with ref to PReq

    Partner function is not working when creating a Purchase Order with ref to a Purchase Requistion, Partner functions maintained in the vendor master are VN, OA & PI.
    But OA & PI are not appearing in the PO header partner tab when created with ref to PR.
    however it works when i create the PO directly ( without the PR ref )
    I am using the same material & Plant for both manual PO & PR to PO.
    Any idea what could be wrong .
    I have maintained the settings for schema groups for vendor master & purchasing doc in the partner determination.
    Thanks
    Dkmurthy

    Hi,
    I have also an issue that seems similar to one you are discussing.
    When we use ME59N and create a PO with ref. from a PR (created from a sales order), the message determination works well, it reads the condition set in MN04 (condition records for messages), and creates a message (with output type for EDI , medium: 6, and partner function LS: Logical system). Message is created and idoc is sent.
    When we try with ME21N, ME21 and we create the PO with ref. to the same PR, either by entering manually the PR in the document overview of ME21N or by selecting the PR (without entering the PR number), i.e with date, the message is not created in the PO.
    Company code is assigned to purchase organization, and so is purchase organization to plant.
    Any idea why there is no automatic message determination in the case of the transaction: ME21N
    Note: If I try ME21N, and enter the output type and partner, manually, I receive a warning message
    VN006 (Partner XXXX does not exist for partner function LS). If I accept this warning message, then message is saved- idoc is sent. However I can not overcome the warning message, if it plays any role, because I can not assign partner function LS to the vendor.Then I receive message CZ 327 (Can not use this partner role).
    Any input is wellcome.

  • The built-in dictionary on my iPad only works with certain sites.  What do I need to do so that I can it all the time. (For example, it does not work when I read e-newspaper.)

    What do I need to do so that I can use the built-in dictionary all the time? My iPad 2's dictionary functions on Japanese e-newspapers but not on the Arizona Republic or other e-newspapers.

    Rikirannu wrote:
    My iPad 2's dictionary functions on Japanese e-newspapers but not on the Arizona Republic or other e-newspapers.
    Are you talking about the English dictionary?  Mine seems to work ok on the AZ republic web page.  Does yours not work on all webpages?  Does it not work when you type an English word in Notes and then do select and define?

Maybe you are looking for