Aavlaibility check for material and Substitution material
Hi Gurus,
I have a requirement where in I need to check the availability of a material and if there is not availability then I need to find out the substituted material maintained for the material.
for example, Material M1 has no stock in ECC and Material M2 is maintained as substitution in the SCM system. I need to figure out the tables or any Function module that can fetch the Material M2 if I provide Material M1.
I am able to check the material availability using the BAPI "BAPI_AVAILABILITY_CHECK". But I didnt find any FM or way to find the substituted material for a material.
Please help me out.
Thanks.
Anand.
I don't know about SCM, but in R/3, the material determination process is based on the standard procedure/access sequence setup. If you trace the condition record maintenance, you will find your table name. If the SCM setup doesn't work that way, there will still be a master data setup step that you can trace and find the table.
Similar Messages
-
Different stock value for accepted and rejected material in quality
Hi,
when we send the final product in quality ,some material has accepted and some material has rejected
But system is showing the value of both accepted and rejected same.
But we want that the value for both should be different.
How we can get it
Regards
PremIt is not possible to valuate differently for accepted and rejected material.
The value for material in PO for total material. So it should be same value for both.
Regards
Ravi -
Valuation class for imports and domestic material
Hi,
We wanted to hit different GLs for domestic and Imported materials inventory and therefore we have defined two valuation classes for Domestic and Imported material and these valuation classes are attached to respective materials in account view 1.
But now our problem is , we have few materials which are procured from domestic market as well as Aboard market.
Therefore now we are facing problem how to hit correct GLs based on the nature of procurement.
Thx in advance...
Regards
Sandeep marwhause split valuation , since materail details is a master record we cant dupoicate .
so use split valuation and give a diffrent valuation class which correcponds to a diff gl account .
so when ver u create a Po givethe valuation type also , so that at Gr doing time , the stock will hit that gl act only. other wise will create issue , it will be grayed out while doin Gr . -
Material and representative material in PCA
Hello all,
I have an issue concerning material numbers in Profit Center Accounting. My aim is to be able to report on material group (attribute on 0MATERIAL) in BW for both plan and actuals.
In R/3 PCA they plan on field "representative material". Furthermore they post actuals on "material" field.
Extractor 0EC_PCA_1 brings all postings (plan + actuals) to BW, but does not include the "material" field. It only includes the "representative material" field, so I'm missing the possiblity to see the actuals per material number.
Extractor 0EC_PCA_3 brings all actual postings to BW and includes the "material number". However the representative field is not filled (since this is only actuals)
So I get what I need into BW, but in two different extractors (and also on two different aggregation levels).
I somehow need to merge the information of these two extractors. Is it a multi cube I should use here? Or should I rather try to modify 0EC_PCA_1 by adding the material number in an append structure? I actually tried this, but I still couldn't find the new field in the extractor. So I guess this is not possible here and that I have to go for the multi cube solution?
I need to get both the "representative material" and the "material" into info object "0MATERIAL" since the material group is an attribute of that. Could this work if I modify the update rules in cube 0PCA_C01 (this is filled with records from 0EC_PCA_1) so that repr. material points at 0MATERIAL (for plan values) and at the same time use cube 0PCA_C03 (this is filled with records from 0EC_PCA_3) which uses 0MATERIAL as standard (for the actuals).
I'd be extremely thankful for some ideas/help...
Thanks in advance!
best regards,
FredrikHi Fredrik,
Some questions:
Is there a 1 on 1 relation between repr. mat. and material?
Do you have PCA_1 as Totals or Line Items?
If you want to report on material group you somewhere have to have a relation between repr. material and mat. group.
Of course you can always map the rep. into 0MATERIAL, but you MD has to be correct too.
And: Adding in PCA extractors is difficult! -
Direct material and indirect material
please explain the what is direct material and indirect material and its different between them
Hi.
Direct materils: These material are bulkly needed and regularly needed for that orgnization to have their end product. these materials usually raw materials ....
Indirect materials: these materils are needed with direct materlias for the manufacture or to produce end product.
Ex: If your orgn's is cement Industry.
Direct materials: Silica Sand. etc..
Indirect matrials:BAG. Gypisum.....
Hope you are Understand with these example...
Regards
S B H -
Check for null and empty - Arraylist
Hello all,
Can anyone tell me the best procedure to check for null and empty for an arraylist in a jsp using JSTL. I'm trying something like this;
<c:if test="${!empty sampleList}">
</c:if>
Help is greatly appreciated.
Thanks,
Greeshma...A null check might not be you best option. If your requirement is you must have both the date and time component supplied in order to populate EventDate, then I would use a Script Functoid that takes data and time as parameters.
In the C# method, first check if either is an empty string, if so return an empty string.
If not, TryParse the data, if successful, return a valid data string for EventDate. If not, error or return empty string, whichever satsifies the requirement. -
I have installed itunes 10.7 several times, all goes well. After reeboot, I go to check for updates and it still wants to update to version 10.7! I cant sync to my iphone4 because I get an error message saying I need version 10.6.3 or later. Help
Thank you for getting me started on the track by mentioning "Revo" Uninstaller. The results of "Revo" spoke volumns on why a successful install of ITunes is so difficult to achieve. It is the evil "BONJOUR".
I then tripped upon the following site by Apple and the detailed directions (I read, printed, re-read and followed the instructions. It was intense) brought a successful ITunes, Quick Time and the lovely Bonjour home. Thank you for the start JD42.
http://support.apple.com/kb/HT1923 -
Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??
Hi SandyS_VZW,
Yes tried resetting the wifi connection and problem still persist.
Here it is...to make it clear. Connected thru the same wifi at home...
-> emails (yahoo/gmail) and facebook WEBSITES are working fine and fast when using/accessing thru a browser (chrome/samsung browser) - no problem with this.
-> emails (yahoo/gmail) and facebook APP is soooooo sloooww (thru the App). Slow I mean comparing it to using their browser/websites... news feeds/emails refreshing so quickly but not when using the APP installed in Samsung Galaxy Note 4. Slow like - It will take around 5-10minutes just to get your emails and news feed refreshed.
THIS HAPPENS ONLY WHEN CONNECTED THRU A WIFI which has a speed of 10-20mb. It is not happening when connected to the network data/plan.
My wife has the same Samsung Galaxy Note 4 (coming from different provider at&t) - same setup (emails, fb app), same wifi connection, but she's not experiencing anything like it.
Not sure why, I dont want to believe that while connected to a WIFI, Verizon is restricting anything and ******* me off to make me switch to my data plan connection everytime - which is Unfair!
Was there a known issue similar about this case?
thanks, -
What do I do to check for viruses and or remove them if there is one? I have never had a problem with my mac until now. It is running VERY slow
This is what it came up with.... any ideas?
EtreCheck version: 1.9.11 (43) - report generated May 27, 2014 at 11:07:36 PM CDT
Hardware Information:
MacBook Pro (15-inch, 2.53GHz, Mid 2009)
MacBook Pro - model: MacBookPro5,4
1 2.53 GHz Intel Core 2 Duo CPU: 2 cores
4 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
System Software:
OS X 10.9.3 (13D65) - Uptime: 1 day 23:26:50
Disk Information:
Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) / [Startup]: 249.2 GB (20.75 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-868
USB Information:
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Gatekeeper:
Anywhere
Kernel Extensions:
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist Support
[loaded] com.macpaw.CleanMyMac.volumeWatcher.plist Support
[running] com.whitesmoke.uploader.plist Support
User Login Items:
iTunesHelper
AdobeResourceSynchronizer
Internet Plug-ins:
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
FlashPlayer-10.6: Version: 13.0.0.214 - SDK 10.6 Support
Default Browser: Version: 537 - SDK 10.9
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 13.0.0.214 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
iPhotoPhotocast: Version: 7.0
Safari Extensions:
WhiteSmoke: Version: 1.0.0.1
Vidx: Version: 2.0
DivX Plus Web Player HTML5 <video>: Version: 2.1.2.145
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Move-Media-Player: Version: npmnqmp 071801000001 Support
fbplugin_1_0_1: Version: (null) Support
3rd Party Preference Panes:
Flash Player Support
Time Machine:
Time Machine not configured!
Top Processes by CPU:
12% DashboardClient
6% coreaudiod
6% WindowServer
5% repair_packages
3% VLC
Top Processes by Memory:
549 MB repair_packages
143 MB com.apple.WebKit.WebContent
131 MB Safari
119 MB installd
94 MB mds_stores
Virtual Memory Information:
809 MB Free RAM
1.82 GB Active RAM
224 MB Inactive RAM
630 MB Wired RAM
3.66 GB Page-ins
207 MB Page-outs -
Duplication check for Lead and Contact
Hi,
Can i confirm that, there is no duplication check for Lead and Contact during the new reacord adding?
I also realise that during the Lead convertion, CRMOD also never check for duplication even i have existing contact available?
Is there anyway for us to activate the duplication check during the Lead convertion?
Regards,
SKSK,
System can check duplicate if you add external id for record (Lead and Contact).
For more information please refer topic 'About record duplicates and external ids' on page no.1303 of OnDemand help.
Hope this helps.
Santosh -
When firefox checking for updates and updates found but due to proxy restrictions it unable to download the updates then it continue trying to download that and this time it creating problem on executing javascript and raising errors.
What are the error messages you are seeing?
-
TS3899 email was working then all of a sudden its "checking for updates" and wont update
My Iphone 4s was working fine and now I can't get the email to update. I have deleted my account and it still isn't working. Everything else internet wise is working, just not the email. Any ideas?
I can send emails, but when it is "checking for mail" and the circle is moving, it never stops, just keeps searching. I checked my email from my computer and I had 10 new emails, so I know they are waiting for me, I can't even retrieve emails that I have read and are still on my account. It won't bring up the accounts at all
-
Why won't my iMac print consistantly to my compatible HP 6500A? I've checked for updates and downloaded the lasted software...still can't print. All my other Mac devices find the printer but the iMac is hit and miss. I'm operating the Mac OS X Lion 10.7.
When you say hit and miss do you mean sometimes you print a whole document with no problems, or do you mean each document has problems? This is from HP's website for your printer:
Your sig says 10.6.7 but your message says 10.7. So if it's really Lion, this printer isn't officially supported. Elsewhere on HP's site it says updated drivers will be available on your Mac via Software Update. Have you run that recently? -
Product costing configuration material and study material
Hi all,
Can any one pass me the Product costing configuration material and study material email id is [email protected]
thanks in advance
Regards
vijay
Edited by: vijay matlani on May 11, 2008 11:17 AMhi
Product costing documentation
http://www.sap-topjobs.com/SpecialPP/746.html
nagesh -
I purchased a song but when downloading it says it is corrupted. So I go to store and check for downloads and it does the same thing
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)
Maybe you are looking for
-
When scanning a negative, it crashed. Then the software won't open and keeps throwing 'Error'. Process: EPSON Scan [796] Path: /Applications/Epson Software/EPSON Scan.app/Contents/MacOS/EPSON Scan Identifier: com.epson.scan.st
-
Imposed document only prints one copy at a time
Hi, Printing a 100 page 25 sheet imposed 8.5 x 14 Acrobat document is limited to only one copy. At the end of the first copy printing; printer stops and requests letter-size paper, for drawer one, printer default is set for 8.5 x 14 and first print r
-
Hi, I have a scenario in which the BPM process went thru an endless loop. There was a logical flaw but the point is that there was no way to kill this process which was running through BPM . We tried RWB, BPM Engine Mointoring but with no success. In
-
Any distribution limitations for commercial use of i-DVD to create content?
Are there any limitations placed upon content created with i-DVD, and distributed for commercial purposes... for example Macromedia placed specific wording in their 'academic' versions of software that the resulting project could not be distributed f
-
How to keep questions from counting toward quiz grade
I have some checks for understanding throughout my module that use question slides. I do not want them to count toward the quiz grade at the end. How can I accomplish this? I can't make them "Survey" questions because I want there to be feedback. If