Abandon Old File History and Start New on Different Drive

On W8 Pro,
Had an attached USB Drive for File History.
Needed USB Drive for something else.
Disconnected it and stopped file history.
File History says drive is disconnected.
I want to start is again on a new network drive, but system keeps asking me to reconnect the old one so that it can use history from it to use on the new one. I responded that I do nor want to use the old history.
Am not able to start File History on New Network Drive.
The Network Drive is a 4TB Seagate connected to the Router and also used for storing System Imges for this and other computers on the network.
Is there any way to convince the system that I never had a previous file history, so that I can start a new one ?

Hi,
Sometimes,regarding this error,it may be caused by the Indexing Service.
I think we check Windows Search service to see if it is enable.
Please Open Control Panel>Administrative Tools>Services>Windows Search and enable it.
If it doesn't work,please see the error log in the event view and upload here.
Regards,
Kelvin hsu
TechNet Community Support

Similar Messages

Can i remove all and start again on different drive?

Hi, I was just wanting to know if i am allowed to completely remove creative cloud and start from scratch again on my larger drive as I did not want it all on my SSD as it was mainly for windows os alone?

When I try to change my drive it keeps telling me I can't install on a root drive, I really do not want to use my SSD C drive as this is dedicated to my OS only, how can I get my apps on my other internal IDE 1TB drive please?

I can not delete my history and adding new bookmarks. Upgrading to later Firefox versions and/or re-installing didn't help. The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.

I can not delete my history and adding new bookmarks.
Upgrading to later Firefox versions and/or re-installing didn't rectify it either.
The address bar still shows the web addresses of old and whenever I make new bookmarks, it's always gone as if it was never made.
Also, I have noticed that every once in awhile you can not close tabs you've opened, either by pushing on the X button and/or clicking on the mouse to close it. Although closing the window and opening it again (without closing the Firefox application) seemed to rectify the problem in the short term, it's becoming quite annoying.
== This happened ==
Every time Firefox opened
== the Firefox is being used

I think I have a solution.
First, download the add-on SQManager. This should be included with FireFox, it is really good.
Look for the file '''moz_hosts''' in the folder '''places.sqlite'''.
Don't delete the file, just delete the information in the file. My file has over 3600 websites, which go back years!! I did not know they were there, but I was frustrated about not being able to get rid of them. They popped up every time I used the address bar. Clearing my history would not get rid of them.
This is where they are stored!! I found that by deleting the pesky web site from '''moz_hosts''', it does not appear in my address bar anymore!!!
I think that if I just delete all the websites in moz_hosts....
Wa-la...History Gone!!!
As long as you don't delete the file, just empty it, FireFox won't know the difference. It will just keep adding websites to it until you empty it again.
Why running "clear recent history" doesn't do this, I don't know. You are doing manually what "clear recent history" is not doing.
Please tell me if you see any flaw in this.
''I think it's the solution we've all been looking for!''

How do I delete my old gamecenter profile and start a new one

How do I delete my old Gamecenter profile and start a new one?

I suggest changing the existing ID rather than creating a new one, all purchases are forever linked to the ID that bought and can never be transferred, you can change all detauils about your ID here:
http://appleid.apple.com
Read this
http://support.apple.com/kb/HT5621

ISE v1.2 - Endpoint abandoned EAP session and started new

Hi.
I have lots of clients that are not able to log on to both wired and wireless networks, and they always fails with these errors.
5411 Supplicant stopped responding to ISE
5440 Endpoint abandoned EAP session and started new
This is with certificate authentication, both for client and for machine.
The clients are for the most part Windows 7.
We use both Cisco and Aerohive for wireless, and the switch I have tested with is a Cisco2960S
A few strange things:
It works perfectly for a lot of clients too, with the excact same configuration.
One PC I'm testing with works fine when authenticating via wireless, but when I plug it into the switch, I get these errors.
I seems to be a timeout of some kind, either to short or too long, but where?
In the Win7 supplicant?
In the switch?
In the Cisco WLC
or in the Aerohive AP?
I have spent hours and hours on this problem, but I can't make it go away, it is very exhausting.
There surely must have been others with the same problem?
Thank you.

Thank for trying to help out, but this is.. insanely vague.
How can i verify that NAS (the C2960S) is properly configured?
What timers are we talking about here? There are many to choose from..
The problem is still here, even with the latest patch 7 for ISE 1.2. It works fine on wireless, but not with wired, from the same computer. So it is logic to assume it has something to do with the switch.
This is the configuration from the switch:
interface GigabitEthernet1/0/20
switchport mode access
authentication event fail action next-method
authentication open
authentication order dot1x mab
authentication port-control auto
snmp trap mac-notification change added
dot1x pae authenticator
spanning-tree portfast
end
sh dot1x int g1/0/20
Dot1x Info for GigabitEthernet1/0/20
PAE                       = AUTHENTICATOR
QuietPeriod               = 60
ServerTimeout             = 0
SuppTimeout               = 30
ReAuthMax                 = 2
MaxReq                    = 2
TxPeriod                  = 30
sh run aaa
aaa authentication login default group radius local
aaa authentication dot1x default group radius
aaa authorization exec default group radius local
aaa authorization network default group radius
aaa accounting dot1x default start-stop group radius!
aaa server radius dynamic-author
client 192.168.100.85
server-key nope!
auth-type any
radius server hmz
address ipv4 192.168.100.85 auth-port 1812 acct-port 1813
key nope!
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
aaa new-model
aaa session-id common
Some debug from the switch:
Apr 6 11:07:01.745: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] Create attr list, session 0x1E0000E0:
Apr 6 11:07:01.745: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding MAC d43d.7e97.1e26
Apr 6 11:07:01.745: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding Swidb 0x4F8BAC8
Apr 6 11:07:01.745: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding AAA_ID=14B
Apr 6 11:07:01.745: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding Audit_sid=C0A864FA0000014B6983A2E0
Apr 6 11:07:01.745: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding Domain=DATA (1)
Apr 6 11:07:01.745: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding [email protected]
Apr 6 11:07:01.745: %AUTHMGR-5-START: Starting 'dot1x' for client (d43d.7e97.1e26) on Interface Gi1/0/20 AuditSessionID C0A864FA0000014B6983A2E0
Apr 6 11:07:01.745: AUTH-DETAIL: No default action(s) for event RX_METHOD_AGENT_FOUND.
Apr 6 11:08:21.182: %DOT1X-5-FAIL: Authentication failed for client (d43d.7e97.1e26) on Interface Gi1/0/20 AuditSessionID C0A864FA0000014B6983A2E0
Apr 6 11:08:21.187: %AUTHMGR-7-STOPPING: Stopping 'dot1x' for client d43d.7e97.1e26 on Interface Gi1/0/20 AuditSessionID C0A864FA0000014B6983A2E0
Apr 6 11:08:21.187: %AUTHMGR-5-FAIL: Authorization failed or unapplied for client (d43d.7e97.1e26) on Interface Gi1/0/20 AuditSessionID C0A864FA0000014B6983A2E0
Apr 6 11:08:21.187: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] Create attr list, session 0x1E0000E0:
Apr 6 11:08:21.187: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding MAC d43d.7e97.1e26
Apr 6 11:08:21.187: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding Swidb 0x4F8BAC8
Apr 6 11:08:21.187: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding AAA_ID=14B
Apr 6 11:08:21.187: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding Audit_sid=C0A864FA0000014B6983A2E0
Apr 6 11:08:21.187: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding Domain=DATA (1)
Apr 6 11:08:21.187: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding Username=host/HovedPC.gaasdal.net
Apr 6 11:09:22.079: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] Create attr list, session 0x1E0000E0:
Apr 6 11:09:22.079: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding MAC d43d.7e97.1e26
Apr 6 11:09:22.079: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding Swidb 0x4F8BAC8
Apr 6 11:09:22.079: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding AAA_ID=14B
Apr 6 11:09:22.079: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding Audit_sid=C0A864FA0000014B6983A2E0
Apr 6 11:09:22.079: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding Domain=DATA (1)
Apr 6 11:09:22.079: AUTH-DETAIL: [d43d.7e97.1e26, Gi1/0/20] - adding Username=host/HovedPC.gaasdal.net
Apr 6 11:09:22.079: %AUTHMGR-5-START: Starting 'dot1x' for client (d43d.7e97.1e26) on Interface Gi1/0/20 AuditSessionID C0A864FA0000014B6983A2E0
Apr 6 11:09:22.079: AUTH-DETAIL: No default action(s) for event SESSION_STARTED.

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

I want to upgrade my old airport express to the new express. Can I just switch out the old for the new or must I delete the old network first and start from scratch with the new express?

It is not necessary to delete your old wireless networks first, but doing so may eliminate confusion. If you wish to do that, open System Preferences > Network, and select Wi-Fi from the left column. Click the Advanced... button, then select your old wireless networks and delete them with the "–" (minus) button. Make sure the "Remember networks this computer has joined" remains checked.
OK then Apply.
This prevents your Mac from searching for your previous network which will no longer exist.
A new Express creates an open wireless network that you must select before you can configure it. It appears in your Wi-Fi menu like this:
Select it. AirPort Utility will load and walk you through its configuration.
Edit: If you are really using OS X 10.5.1 as shown in your profile, the above screenshot is not applicable. Instead, select the network called "Apple network nnnnnn" and then launch AirPort Utility.

5440 Endpoint abandoned EAP session and started new

We have an ISE deployment for testing.
This is running v1.2.0.899.
We have an auth policy configured for domain-joined computers for 802.1x and domain credentials:
     Condition: Wired_802.1X
     Allow Protocols: PEAP_CHAPv2
     Use: AD
This works, and authenticates both the machine (pre-login) and user (post-login).
However, I am seeing some errors int the Auth logs before the 5200 Authentication succeeded message.
These messages are not shown in the Cisco ISE Log Messages spreadsheet!
    5441 Endpoint started new EAP session while the packet of previous EAP session is being processed. Dropping new session.
    5405 RADIUS Request dropped
    5440 Endpoint abandoned EAP session and started new

I am seeing this error when a windows supplicant is booting up, we want them to use EAP-TLS. Before the GPOs has struck, they try to authenticate using EAP-PEAP on their own, which they aren't configured to do. Shortly after that, they send the EAP-TLS packets. After the supplicant has been authenticated, the 5440 error shows up but without affecting the authentication.
My guess is that this is the result of Windows behaviour. This generates a couple of "failed" authentications that in our case just confuse the costumer. I know this isn't an answer on your question, just my experience with the problem.

HT4759 How can i delete an old iCloud account and start using my own using my Apple ID? If I don't have the old password??

How can i delete an old iCloud account and start using my own using my Apple ID? If I don't have the old password??

If your device is signed into an old iCloud ID that is an earlier version of the ID you want to sign in with, do the following:
If you are using iMessage and FaceTime, make sure you are signed into these services with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then save any photo stream photos that you wish to keep to your camera roll (unless you are using iCloud Photo Library). When finished go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music it no longer goes to icloud an does not show up on my iphone.

I have a new email address. Changed this on my itunes account. On iPhone deleted old icloud account and created new with new email. I have set find my phone to on. When I download music from itunes it no longer goes to icloud an does not show up on my iphone.

I have the same problem - it is maddening. I rely on this iPad for work so this is not just an annoyance! The above solutions of changing the appleid on the device or on the website do not work.
The old email address no longer exists - I haven't used it in a year probably and I no longer have the account. I logged into the appleid website and there is no trace of the old email address so there is nothing that can be deleted or changed there. On the iPad there is no trace of the old email address so nothing can be deleted there either. I have updated the iPad software and the same problem comes right back. Every 2 seconds I am asked to log in using the old non-existent email. The device is currently useless.
The only recent change to anything was the addition of an Apple TV device, which was set up using the correct login and password.
Does anyone have any ideas? The iPad has been backed up to the iCloud so presumably it now won't recognize the current iCloud account? So restoring may notbe an option?

I have an ipod touch 8gb model number MA623LL. How do I install apps on my ipod? Is it capable of transferring/running apps? Why doesn't my ipod touch have the basic-beginning app on the beginning screen after i erased/wiped my ipod and started new?

i have an ipod touch 8gb model number MA623LL. How do I install apps on my ipod? Is it capable of transferring/running apps? Why doesn't my ipod touch have the basic-beginning app on the beginning screen after i erased/wiped my ipod and started new?

Googling shows that you have the 1G iPod. For apps you need at least iOS 2. The iG can go as far os 3.1.3 that you get here:
Purchasing iOS 3.1 Software Update for iPod touch (1st generation)
Just be aware that there are presently not that many apps that work with a 1G with iOS 3.1.3

I have two accounts with iTunes. Can they be merged or somehow combined so that I can have access to everything from both my old iPod Touch and my new iPhone5?

I have two accounts with iTunes. Can they be merged or somehow combined so that I can have access to everything from both my old iPod Touch and my new iPhone5?

No.
You can authorize your computer for both accounts. Put all of the music on one computer. Sync your devices to that computer.

Can I switch back and forth the same sim card between an old iPhone 4 and a new one never used in order to activate the latter? Should I use same Apple Account?

Can I switch back and forth the same sim card between an old iPhone 4 and a new one never used in order to activate the latter? Should I use same Apple Account? Should I activate it via WiFi or iTunes? I am filtering on the MAC no and I cannot read that number from the new iPhone without having it activated??!!
All I want do is to have the new phone activated and then tested!
Ciao // Mufftas

Yes, you can do that.

Hi! I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is

Hi!
I have a WD my book external hard drive plugged into my imac and I want to share it over my network with my apple tv. I went into system preferences > sharing, checked "file sharing" and added my external hard drive to the shared folder. So now it is listed in "shared folders" but under "users" everything is grayed out (it says "read and write" for "everyone" - but "read and write" is grayed out, and it doesn't let me add or subtract users). Now I can access all of the folders I shared from my imac except for the externalhard drive. What's going on?

Hi RRFS!,thanks for help.I forgot to tell that hard drive has 2 partitions 1:format :Mac OS Extended (Journaled) and that works properly,2:format:MS-DOS (FAT32) and when i "get info" for both :first has shering & permitions:You can read and write - with name and privilege, second has shaing & prermissions:You can read and write- without name and privilege

Time Machine Question (want to keep old back up and start a new one)

Hello
I have a MacBook Pro that I back up using Time Machine to a Segate External Harddrive. I have several weeks worth of back ups stored using Time Machine. Then I needed to have my system wiped clean due to overheating. I just got it back and I have been working to restore my system (application by application.... folder by folder, file by file) from the most recent Time Machine.
However I didn't put it all back - I kind of picked and choose what I reinstalled.
I would like to set my MacBook Pro back up with Time Machine BUT I really really do not want to overwrite the old backups. In my ideal world I want to start a whole new set of backups. However I can't figure out how to do that.
I tried changing the name of the folders in Time Machine and that didn't work. I tried copying them, that didn't work either. It keeps telling me "The operation can’t be completed because it isn’t supported."
Is there any way to start a whole new time machine back up using the same external hard drive? This way I still have my old Time Machine Back ups should I need them (from my computer before we wiped it clean).
Thanks!
Alison

alreilly wrote:
However I didn't put it all back - I kind of picked and choose what I reinstalled.
That's usually a recipe for disaster. You're likely to miss all sorts of things that way. Plus, if you have any "complex" apps (typically, the ones that come with their own installers and put other files on your system), they won't work properly, if at all, unless you also copy those files. Or reinstall them from the original discs.
Your best bet is to do a full system restore, then delete what you don't want.
I would like to set my MacBook Pro back up with Time Machine BUT I really really do not want to overwrite the old backups.
Time Machine won't necessarily do that. But it will make a new full backup of the "new" drive (since it was erased, it's treated as a different drive). If there's not enough room for it, it will start deleting old backups trying to make room for the new one.
(That doesn't happen if you do a full system restore, or use Setup Assistant or Migration Assistant to put your data back.)
You can avoid that by manually telling Time Machine to "associate" the new drive with the old backups, per #B6 in Time Machine - Troubleshooting. TM will then do an "incremental" backup, of just what's new or different from the last backup.
If you don't do that, you won't see the backups of the "old" drive normally, but you can via the procedure in #E3 of the same link.
In my ideal world I want to start a whole new set of backups. However I can't figure out how to do that.
If there's enough room on the backup disk, you don't need to.
Is there any way to start a whole new time machine back up using the same external hard drive? This way I still have my old Time Machine Back ups should I need them (from my computer before we wiped it clean).
Again, if there's room, you don't need to do that. If there isn't, you can't, short of using a different disk.
But if there's room, and you want to keep the old backups indefinitely, you might be able to create a second partition, and start backing-up to it. See #3 in Using Disk Utility.

I want to reset my computer to close everything and start new

i have a mactinosh g5 and i have the mb427z/a. i want to reset it and start with new everything but i dont know how to so please help me

Throw away any files which may contain sensitive data, securely empty the Trash, insert its original disk, restart the computer with the C key held down, use the Disk Utility to erase the partition with Mac OS X installed, and install a fresh OS onto it.
If you're going to sell or give away the computer, include the disk with it.
(106763)

Abandon Old File History and Start New on Different Drive

Similar Messages

Maybe you are looking for