ABAP and Business one

Hi Friends,
I tried searching the net for details but i was not able to clearly find. Hence i am posting on this forum. Hence, i apologise for asking such a basic question but i believe that you people can clarify my doubts
I am working with SAP ABAP for the past 2 years. It was recently one of my colleague suggested about SAP Business one. My queries are :
1. Is there any link between ABAP and business one ( i.e does it make sense for an ABAPer to learn business one. Are there any concepts of ABAP which we use in Business one)
2. Is it worth to change your skill set from ABAP to business one?
3. How good is the market for Business one ?
Expecting your reply. Thanks in advance.
Cheers,
Prem

1. Is there any link between ABAP and business one ( i.e does it make sense for an ABAPer to learn business one. Are there any concepts of ABAP which we use in Business one)
ANS: There is no link between ABAP and SAP B1.
2. Is it worth to change your skill set from ABAP to business one?
ANS: This is left to the individuals mindset.
3. How good is the market for Business one ?
ANS: Market is good for experienced people

Similar Messages

Crystal Reports and Business One Problems

Hello all
Some questions about Crystal Reports and Business One, I try run some Crystal reports developed in special but for some reason when I ussing Terminal Services this unplug, so, more strange its when the user are not administrators because when are adminstrators this problem is not present.
Some tip its welcome.
Thanks a lot

Hi Ricardo,
I checked the privileges point to point, even as he opened like to administration, but no response as to assign regular users, that is strange.
>I didn't undertstand these statement .What do you mean by point to point .There is only one place you have to specify was user has access to the group you have defined .As described , it is done in number 4 .(Please refer to that )
When we are talking about user -there is two user --One is superuser and regular user
If you are super user , you have to give permission to other users to only crystal report and regular user doesn't need access to Administration module <referring he opened like to administration> .
BTW , Are you familiar with crystal report administration in SAP b1 ? You can find several thread poiting towards training material in the forum
Hope this helps
Bishal
Edited by: Bishal Adhikari on Mar 2, 2009 2:43 PM

Information about Integration WebDynpro for ABAP and Business-Workflow

Hi Experts,
I'm looking for information about
Integration WebDynpro for ABAP and Business-Workflow
Link, documents and books are welcome!
Thanks
mishak

If you have worked on workflows earlier the procedure is very simple. You just need to enter certain parameter values of your application in SWFVISU for the respective task and re-register your system in UWL administration. Thats it! your webdynpro and workflows are integrated. For details on the parameters check the following link,
http://help.sap.com/saphelp_nw04/helpdata/en/19/bff5c18ba44da4a4ca68cf572dabda/frameset.htm
There are also a couple of blogs on "launching webdynpro from UWL" (Procedure for both Java and webdynpro is almost similar). You can also check these for more details.
Thanks,
Prasath N

CE and Business One

Hi everyone, I would like to know if someone knows the relationship between Composition Environment and Business One, if they are compatible or in which way they can be integrated.
Thanks in advance.

Hi ,
On this page you can see that SAP Business One is able to communicate through Web Service.
http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/a0915b47-ef89-2a10-91a5-b22649e5cfab [original link is broken]
That's all you need to create applications with CE that connect and interact with SAP Business One data and processes.
Hope it helps,
Regards, Gilles.

Reg: Diff between SAP business suite and Business One

Hi Guru,
We are planning to implement SAP in our industry.
Now we are planning to implement SAP Business one. After three years we will bring in complete SAP implementation.
1.Can you please tell the difference between complete SAP Implementation and SAP B1.
2.Could you please explain, if we implement SAP B1 right now. will there be any problem if we go for complete implementation.
3.If the business grows above one billion,will B1 hold good?
4.What is the business suite?
Thanks & Regards,
S.Nehru

Nehru,
thank you for considering SAP solutions.
W regards to question 1 and 4, in short:
SAP Business Suite on traditional relational databases or on HANA is the most extensive SAP set of SAP Business application and includes the SAP applications ERP, CRM, SCM (Supply Chain) SRM (Supplier Relationship) and PLM (Product Lifecycle)
A1 is based on SAP Business Suite and tailored by SAP partners.
B1 is a separate product, so is Business by Design.
All solutions are integrated and used by the largest global enterprises and their subsidiaries as well as by SME small and midsize enterprises, depending on their requirements.
Please see Solution overview of SME solution for more details on A1, B1 and Business by Design.
In addition to the Business Applications, SAP also offers Business Networks Solutions like ARIBA and Concur.
The majority of SAP customers are SME customers: At the end of the third quarter of 2014, SAP has more than 263,000 customers, of which more than 80 percent, or 212,500, are SME's.
Without knowing more details, it would be not professional from my site to provide an answer to your question 2 and 3. Please work with your local SAP partner or SAP Account Executive to validate your approach.
Thank you
erich

BW and Business One

Hello,
I never used SAP Business One and don't know much about it. What are the differences of using BW in SAP Business One than with regular R3 systems? Is it possible using the SAP Portal with SAP Business One?
Thank you!
David

SAP Business One and R3 are completely different systems. You can use SAP Business One Integration Technology to bridge them: there is information available on this site about this technology, including a forum.
Should you need more info, I suggest you to post questions on it.

ABAP and business inteligence server

Gurus,
can an ABAP program be written off sudo code or developed remotely, zipped and shipped to overseas where the BW server is, and applied there on the server. Is it possible. Thanks.
Venkat

fixed

Business One 2005 in the US and license model

Hello,
I'd like to know if there is a difference between Business One in Europe and Business One in the US.
As far as I know it's the same cluster (A) so it's the same version right ?
is there a difference on the license mechanism ? it it license per seat (10 licenses = 10 user) or license sequential (10 licenses = 10 people can use at the same time, but it can be more than 10 users)
Thank you

Sébastien
The Licensing is based on Named Users. 10 licenses = 10 users.
I don't think there is any difference in licensing between US and Europe.
Suda

Windows Workflow Foundation and SAP Business One

Does anyone here have any experience creating Windows Workflow Foundation (.NET 3.5) activities and workflows that interact with SAP Business One?
A lot of examples in books show how easy it is to use workflows to write directly to a database, but we obviously cannot do that with SBO.
I am most interested in where to place the code to log into the DI-API and how to pass that connection to the individidual activities.
Thank you,
Mike

Michael,
This could be done with some work using the DI Server and Business One Web Services (B1WS). You can get more detail on B1WS from the Tools section of main SAP Business One page here on SDN ... although it does not go into WFS or WF.
In the future when eSOA services are delivered for SAP Business One ... you will see that WF can be used much more easily. This is an area that SAP is investigating ... keep a lookout on SDN!
Eddy

Abap proxy business system

Hi Everyone,
      I created all required objects using IR for abap proxy to file scenario.Now i want to create technical and business systems for this scenario.I read in doc that i need to create technical system of type WEB AS ABAP and business system for R/3 system.
I couldn't find all required parameters and how to do this?any help would be appreciated.thanks in advance.
Regards
vinay

Hai Ivanovih,
Thank you for reply.
I got the details of r/3 system.I started creating Technical syste of type WEB As ABAP.
1.System Type
WEB AS ABAP
2.General
Web AS ABAP Name (SID):VJY
Installtion Number:INITIAL
Database Host Name:BASIS
3.Central Servers
Message Server
Host Name:Basis
Message Server Port(sapmsVJY):3600
Central Application Server
Host Name:BASIS
Instance Number:00
4.Application Servers
Add Application Server
Host Name :BASIS    Instance Number :00
5.Clients
Client List
Add New Client
client Number   Logical Client Name
6.Installed Products
upto 4 steps i given required details.if anything wrong with details given please correct me.
how to get client number and logical client name?what details required for installed products?
Vinay

Business one - how is the prospects for a MBA fresher

I am very new to business one and I need some information regarding its training and prospects. One of my friend has graduated (MBA) and trying to get into SAP. Since he is fresher he is not able to undergo any major SAP module. The training center is recommending him to underto business one and jump to other modules after he gets his experience. In this circumstance (a fresher trying to learn SAP and become BSA) is Business one an apt module for him? Can he later jump to a major module? How easy difficult will it be for him?
Please give your valuable suggestions.
Thanks,
Deepak

Hello Deepak - I can provide some input from some experience both as a user and as an implementation specialist.
Most folks think that the R3 world is the best place to start due to the larger number of opportunities and the ability to specialize very quickly in a very thin and focused module (for example, HR in R3). IF, and that is a big IF, a person wants to be locked into a very thin and specialized module, then going to the R3 world is great.
However, if a person likes to work with the entire range of business operations then All In One, Business by Design, and Business One are the avenues to go. Although there are differences between the R3 world and these other packages, the truth of the matter is that it is much easier to go from these other packages into R3, than vice-versa. Why? Because with the other packages, you are forced to understand what is going on throughout the entire system and the entire business process. I have seen over and over again where an experienced and seasoned R3 person has tried to work in one of the "all-encompassing" packages and drops from senior to junior in the process because they know one distinct area and now they need to know everything (which most do not).
A lot of people refer to SAP Business One as the "little brother" to R3 (and sometimes even insinuate that SAP B1 is not that tough), but you tell me - which is harder to know in an expert fashion - one single piece of the business or the entire process which a business goes through? I have been on both sides of the fence and, believe me, knowing what to do functionally and technically for the entire process is a much larger effort and requires a special kind of person.
You hear many horror stories about the R3 implementations which take years to do, millions of dollars, and an army of consultants. Why is that? Because each consultant knows his/her piece and mis-communication and finger pointing are farily easy to do. Not quite possible when you have only one or two consultants there to do the entire SAP B1 implementation; it goes quickly and the responsibility is squarely set upon the shoulders of those one or two consultants.
SAP is currently making a big push in SAP Business by Design (SAP ByD) in the upcoming months and have a variety of Webinars and are creating some good documentation since it is a newer SAP release. The SAP ByD field is wide open for anyone because there are few consultants who can claim experience (which makes it good and bad, depending upon how you see it).
So the bottom line question comes to this; does your friend want to be part of the army in R3 and learn a specific area of business or does the person like to work as the hedge-pin of success and responsibility in a broad and entire business process? Finding a great and all-around SAP B1er is like finding a jewel - I have had the pleasure of working with SAP B1 for the past six years and having someone on the team who is both knowledgable and able to get things done is a great asset...the SAP B1 implementation is both tough but very rewarding...
Good luck for your friend who is starting out...
Regards - Zal

Laptop Business one Installation

Hi,
My question is about laptop installation.My operating system is MS XP home edition.Should I install SQL enterprise edition for business one installation? I think this implementation is not the same as the client installation,because of the fact that my laptop have to be not only a client also a server.I have tried to install sql enterprise edition and Business one but I had some diffuculties by licence server installation.A server was searched by the system to log on.I'm waiting for your response.Thanks for your help.

> I have 6.5 installed, the SQL version that I have
> installed in this OS is the personal edition. I think
> enterprise edition is for server OSs. So it will not
> work for you.
I was not able to install the enterprise version, too. If I remember right, the error message told me i need to install it on a server os (w2k server) - just as you said.
Fidan:
Just download the MSDE from Microsoft, it's free:
http://www.microsoft.com/sql/msde/default.asp
Probably you do not have any problems with it, just install by executing the setup

About ABAP Technical Systems and Business Systems

Hi experts,
I have an Integration scenary with XI and an R3 vía RFC. I've already created it in the development environment and when I'm going to transport to Consolidation and Production I find that the ABAP Business System related to the ABAP Technical System of the R3 have a different name from the development one.
In the Integration Repository everything its OK because my scenario is developped on a third party system BS and TS. The problem is in the Directory because of the BS of the Message interfaces....
I think that transport Directory scenario with .tpt wont work. I'll probably have to develop it in each environment... What do you think?
Regards
Gonzalo

This is what you need to do to move from Dev to QA.
1. Go to Dev SLD and Export all your SWCV, Products, Technical and Business Systems. This is nothing but saving of the SLD objects as a CIM file on your local machine. You would also need to export the Technical And Business System poitning to your XI integration server .
2. Go to the QA SLD and then import these objects exported in Step 1 in QA SLD
3. Now, create the QA Tech and Business Systems in the QA SLD
4. Go to the Dev Business systems imported on the QS SLD and you will have an option Transport Targets. In this map the Source Business System to the Target Business Systems.
Make sure that all Dev Business Systems have the correspodning Transport Targets for the QA Business SYstems
5. Now if you import the ID objects in QA , the business systems name will be renamed automatically.
Regards
Bhavesh

Individual business system for ABAP and Java Stack

Hi All,
I need to send message from a system to XI via ABAP proxy and Java proxy. The sender's ABAP and Java proxy use the same message interface to communicate with XI. Should I create one business system for the ABAP stack and one for Java stack of the sender system?
Thanks + Best Regards
Jerome

Are you sending same message type from ABAP proxy and Java Proxy to XI?
If you have ABAP proxy, why do you need Java Proxy? Actually you cannot create any Java proxies on ABAP bases systems. What kind of system sender is? Java proxies are created for pure Java based applications.
Let me know if I didnt understand your question correctly. If so, please explain in detail why you need both proxies and what is your sender application.
--Archana

Hide and activate fields in SAP Business One

Hi,
How do I see the following in SAP Business one 2007 A?
1 - Where do I see the option of hiding or making a filed mandatory, optional etc.? Can i hide some fields in A/P invoice entry? How do I do that?
2 - How do I create a field or a column which will populate necessary details. For example..How do I create a column named amount in the A/P invoice so that it shows the corresponding amout of the invoice near the column named Invoice number?
3 - How to access a particular column from a table structure? Do I need to write an SQL query for this?
4 - How to pull up a field from a table and make is visible for the users? Do I need to be an ABAP expert for this?
5 - What are stored procedures?
Please let me know!! Thanks

3 - How to access a particular column from a table structure? Do I need to write an SQL query for this?
Try the link below:
how do make link between query and UDF
Yes, you write the query by going to Tools->Query Generator.
You need to know the FMS number for the varialbe AMOUNT you created.
You can know that by turning on debug info View->Ssystem Info, and then placing your cursor on AMOUNT. At the bottom left know its FMS variable number. There are multiple ways of dealing with.
Use the above variable in the Query Generator with a $ sign. Save the query. General (some name)
Then attach the above query to AMOUNT ShiftF2 and click to dril down to saved query and attach it. Choose the type refreshment.
I am missing out on some small details, but you have to try it you will get there.

ABAP and Business one

Similar Messages

Maybe you are looking for