Abap and java patch level
Hi,
I have a portal installed on a standalone java based on sp13. I also have a backend ECC5.0 on a web as abap (sp9). If I want to connect the portal to the backend ecc, do I need to upgrade the abap to the same patch level as the standalone java (ie. sp13).
Also, I have installed the portal via rapid installer, which has also created a new sld for me. If I want to add the abap as a new technical system in the sld, is it required that both the java (of which the sld is based) and the abap be of the same patch level? thanks!
Hi,
If you want to connect to the backend system , both the Portal and ECC (Back end System ) need not be of the same pacth level. And you can also add the techincal system in SLD of diffrent pacth levels.
Thanks,
Tanuj
Similar Messages
-
ABAP and JAVA stack together?
Hello Friends,
I wanted to install the ABAP stack SP12 with JAVA stack SP09. I am downloading the last file of the stacks. Is it possible to install them together on one OS(I have W2K Enterprise Edition)?
Can you guys please help me out here ?
Best Regards,
Fatih Koekce.Hi
Basically ABAP and Java patches would be inpendent of each other except the Kernel.
You can apply them together as Java patches are to be applied through JSPM and ABAP patches through SPAM, but it is usual practice to apply ABAP patches first and go ahead with Java stack. Because Applying them together would use considerable amount of system resources.
Hope this is helpful.
Regards
Rahul -
ABAP and JAVA trial together and RFC
Hello, I successfully installed NW ABAP 7.01 and NW JAVA 7.1 in the same machine and both installations work ok, but what I really want to do is to call some RFCs on the abap side from a web dynpro in the java side. I know i have to do something with the SLD, System Landscape Directory but I just don't know how to do the configurations, can anyone help me please?
Hi
Basically ABAP and Java patches would be inpendent of each other except the Kernel.
You can apply them together as Java patches are to be applied through JSPM and ABAP patches through SPAM, but it is usual practice to apply ABAP patches first and go ahead with Java stack. Because Applying them together would use considerable amount of system resources.
Hope this is helpful.
Regards
Rahul -
Level of Knowledge in ABAP and Java?
Hi All,
I am seeking a career in SAP Netweaver Process Integration - XI and would like to know what level of knowledge would i need to have in ABAP and Java. If i should have any what are the area's that would be expected. Please Clarify.
Your advice will be greatly appreciated.
Thank You,
Ajay C Indukuru.Hi Ajay
in addition to chirag's comment
We use ABAP Proxies in case of we are dealing with the ABAP Based Applications
We use JAVA Proxies in case of we are dealing with the JAVA based application
in SAP XI We have two ways of connectivity
1) adapter
2)proxy
in applications based on WAS 6.20 or above we can directly communicate to XI through Proxies
while application based on below WAS 6.20 you have to use adaptyer to communicate to XI
proxies seperate business application logic from the integration logic of integration logic
proxy generation converts non language specific interface description in WSDL into executable interface
Java proxy is generated from the WSDL description opf interface and this is generated as a JAR file in IR
while ABAP proxy is generated by transaction SPROXY
on Application server based on WSDL description of message interface
PROXIES have same mode and direction as Interfaces have
To learn Java you should know only basic concepts of java means you must have basic java programmin skill
Java proxy can be generated through wizard also this is an inbuild functionality of SAP XI
to lear java follow this link
java.sun.com/docs/books/tutorial/
To learn ABAP you should know beginner level ABAP4GL
ABAP is very simple language and coding is like that you are writing simple english sentence so you would be feeling comfortable withABAP with a little practice
GO to T CODE se24 and start developing
learn ABAP with this link
http://www.itquestionbank.com/sams-teach-yourself-abap-4-in-21-days.html
for more advance version you may follow SDN
in my opinion nothing is so hard to learn
i hope this may assist you
if helpful kindly reward points
Regards
Sandeep Sharma -
ABAP and JAVA: Different SP Levels
Dear Experts,
We have a newly installed DEV system for SAP PI7.1 with Ehp1 , the ABAP stack has been upgraded to SP level 5 while JAVA stack is still on basic SP (less than 5).
Now my question is will this SP mis-match cause any impact (no/ low/ medium/ high) on the performance/ working of our SAP PI7.11 system? Will we be able to do the normal development and testing with this SP level difference?
It will be very helpful if there is any document/ blog/ article which deals with such a scenario.
Thanks.Dear,
If yes then it should be fine no need to check any thing.
I found below two threads which indicate that SP level difference can cause an issue (may be while testing/ transporting).
Re: Error while posting messages to SOAP sender adapter SP 13
Re: ABAP and JAVA stack on different SP Level
Any more inputs on this topic please.
Thanks. -
Error during VM container communication between ABAP and JAVA
Hello,
While creation of SC, I am getting error "Error during VM container communication between ABAP and JAVA"
Based on earlier responses in this forum, I checked following activity.
1. T Code - BBP_CND_CHECK_CUST
Result - IPC Pricing is Active and IPC is now running in VMC
2. Run Report - RSVMCRT_HEALTH_CHECK
Result - The Java component is deactivated
3. As per OSS note 854170, Profile parameters were existed as below
a) vmcj/enable - on
b) vmcj/option/maxJavaHeap = 200M
So, How to get Java component activated?
Thanks,
Rahul MandaleThanks Markus,
For SM53, I am getting resulets as " Java is not active on this application server - Message no. SVMCRT011"
Can you suggest, what I need to do for it? I can't use SRM Shopping cart because of it. thanks in advance, Rahul
and dev_w0 trace ....
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Wed Aug 31 15:45:40 2011
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' ...
B Library 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' loaded
B Version of 'D:\usr\sap\CUS\DVEBMGS04\exe\dboraslib.dll' is "700.08", patchlevel (0.46)
B New connection 0 created
M sysno 04
M sid CUS
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 52
M intno 20050900
M make: multithreaded, Unicode, optimized
M pid 456
M
M kernel runs with dp version 210000(ext=109000) (@(#) DPLIB-INT-VERSION-210000-UC)
M length of sys_adm_ext is 572 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 456) [dpxxdisp.c 1293]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 18304 (1408)
M DpShMCreate: sizeof(tm_adm) 3954072 (19672)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
M DpShMCreate: sizeof(comm_adm) 528064 (1048)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1452)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 05C00040, size: 4613144)
M DpShMCreate: allocated sys_adm at 05C00040
M DpShMCreate: allocated wp_adm at 05C01E28
M DpShMCreate: allocated tm_adm_list at 05C065A8
M DpShMCreate: allocated tm_adm at 05C065D8
M DpShMCreate: allocated wp_ca_adm at 05FCBB70
M DpShMCreate: allocated appc_ca_adm at 05FD1930
M DpShMCreate: allocated comm_adm at 05FD3870
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06054730
M DpShMCreate: allocated gw_adm at 06054770
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 060547A0
M DpShMCreate: allocated wall_adm at 060547A8
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M Wed Aug 31 15:45:41 2011
M ThInit: running on host crmsys
M
M Wed Aug 31 15:45:42 2011
M calling db_connect ...
C Prepending D:\usr\sap\CUS\DVEBMGS04\exe to Path.
C
C Wed Aug 31 15:45:47 2011
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSR3's password
C Connecting as /@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Attaching to DB Server CRM (con_hdl=0,svchp=061A3EC8,svrhp=061B5794)
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C
C Wed Aug 31 15:45:48 2011
C Now '/@CRM' is connected (con_hdl 0, nls_hdl 0).
C Got SAPSR3's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=061A3EC8,usrhp=061CA558)
C Now I'm disconnected from ORACLE
C Connecting as SAPSR3/<pwd>@CRM on connection 0 (nls_hdl 0) ... (dbsl 700 240106)
C Nls CharacterSet NationalCharSet C EnvHp ErrHp ErrHpBatch
C 0 UTF8 1 0619F158 061A46F4 061A3F7C
C Starting user session (con_hdl=0,svchp=061A3EC8,srvhp=061B5794,usrhp=061CA558)
C Now 'SAPSR3/<pwd>@CRM' is connected (con_hdl 0, nls_hdl 0).
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance CRM is running on CRMSYS with ORACLE version 10.2.0.1.0 since 20110831
B
B Wed Aug 31 15:45:49 2011
B Connection 0 opened (DBSL handle 0)
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20110831 154542 CRMSYS
M db_connect o.k.
M ICT: exclude compression: .zip,.cs,.rar,.arj,.z,.gz,.tar,.lzh,.cab,.hqx,.ace,.jar,.ear,.war,.css,.pdf,.js,.gzip,.uue,.bz2,.iso,.sda,.sar,.gif
I
I Wed Aug 31 15:46:12 2011
I MtxInit: 0 0 0
M SHM_PRES_BUF (addr: 0A7C0040, size: 4400000)
M SHM_ROLL_AREA (addr: 788A0040, size: 61440000)
M SHM_PAGING_AREA (addr: 0AC00040, size: 32768000)
M SHM_ROLL_ADM (addr: 0CB50040, size: 615040)
M SHM_PAGING_ADM (addr: 0CBF0040, size: 525344)
M ThCreateNoBuffer allocated 544152 bytes for 1000 entries at 0CC80040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0CD10040
X EmInit: MmSetImplementation( 2 ).
X MM diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation flat
X ES initialized.
B db_con_shm_ini: WP_ID = 0, WP_CNT = 13, CON_ID = -1
B dbtbxbuf: Buffer TABL (addr: 10E700C8, size: 30000000, end: 12B0C448)
B dbtbxbuf: Buffer TABLP (addr: 12B100C8, size: 10240000, end: 134D40C8)
B dbexpbuf: Buffer EIBUF (addr: 0FBA00D0, size: 4194304, end: 0FFA00D0)
B dbexpbuf: Buffer ESM (addr: 134E00D0, size: 4194304, end: 138E00D0)
B dbexpbuf: Buffer CUA (addr: 138F00D0, size: 3072000, end: 13BDE0D0)
B dbexpbuf: Buffer OTR (addr: 13BE00D0, size: 4194304, end: 13FE00D0)
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
M CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
S
S Wed Aug 31 15:46:15 2011
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 1946AA80
S
S Wed Aug 31 15:46:16 2011
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S found processing queue enabled
S found spool memory service RSPO-RCLOCKS at 1D6D00A8
S doing lock recovery
S setting server cache root
S found spool memory service RSPO-SERVERCACHE at 1D6D0430
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A Wed Aug 31 15:46:18 2011
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 4kb, total admin_size: 5132kb, dir_size: 5076kb.
A Attached to PXA (address 688A0040, size 150000K)
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A
A Wed Aug 31 15:46:20 2011
A ABAP ShmAdm attached (addr=57A40000 leng=20955136 end=58E3C000)
A >> Shm MMADM area (addr=57EB5E58 leng=126176 end=57ED4B38)
A >> Shm MMDAT area (addr=57ED5000 leng=16150528 end=58E3C000)
A RFC Destination> destination crmsys_CUS_04 host crmsys system CUS systnr 4 (crmsys_CUS_04)
A
A Wed Aug 31 15:46:21 2011
A RFC Options> H=crmsys,S=04,d=2,
A RFC FRFC> fallback activ but this is not a central instance.
A
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC rfc/bc_ignore_thcmaccp_retcode not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
M ThrCreateShObjects allocated 13730 bytes at 0FFB0040
N
N Wed Aug 31 15:46:22 2011
N SsfSapSecin: putenv(SECUDIR=D:\usr\sap\CUS\DVEBMGS04\sec): ok
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is D:\usr\sap\CUS\DVEBMGS04\exe\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N
N Wed Aug 31 15:46:23 2011
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
M JrfcVmcRegisterNativesDriver o.k.
W =================================================
W === ipl_Init() called
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:700.08]):
B max_blocking_factor = 15, max_in_blocking_factor = 5,
B min_blocking_factor = 10, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_join = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
W
W Wed Aug 31 15:46:24 2011
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 700, [7000.0.52.20050900]
W ITS Plugin: Int.version, [32]
W ITS Plugin: Feature set: [10]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
E Enqueue Info: rdisp/wp_no_enq=1, rdisp/enqname=<empty>, assume crmsys_CUS_04
E Replication is disabled
E EnqCcInitialize: local lock table initialization o.k.
E EnqId_SuppressIpc: local EnqId initialization o.k.
E EnqCcInitialize: local enqueue client init o.k.
B
B Wed Aug 31 15:46:48 2011
B table logging switched off for all clients
M
M Wed Aug 31 15:47:55 2011
M SecAudit(RsauShmInit): WP attached to existing shared memory.
M SecAudit(RsauShmInit): addr of SCSA........... = 05BD0040
M SecAudit(RsauShmInit): addr of RSAUSHM........ = 05BD07A8
M SecAudit(RsauShmInit): addr of RSAUSLOTINFO... = 05BD07E0
M SecAudit(RsauShmInit): addr of RSAUSLOTS...... = 05BD07EC
A
A Wed Aug 31 15:48:44 2011
A RFC FRFC> fallback on the central gateway crmsys sapgw04 activ
B
B Wed Aug 31 15:49:47 2011
B dbmyclu : info : my major identification is 3232288873, minor one 4.
B dbmyclu : info : Time Reference is 1.12.2001 00:00:00h GMT.
B dbmyclu : info : my initial uuid is D98FA690E8AA314D9B69930868792664.
B dbmyclu : info : current optimistic cluster level: 0
B dbmyclu : info : pessimistic reads set to 2. -
Hi Experts,
I need small information on JAVA Patch level.
Presently we are on Patch level 15 in portal system and latest patch available in market place is 19.
Please guide me which patch level can i go and apply.
Regards
JanThe best practice is to go with one step lesser than the highest patch available, because to get the fiexes to the problems with the highest patch will take some time and the 18 patch should have got the fixes by the time highest patch is released. and also you might get the possible issue with the patch 18 from the people who already adopted it or from the market place (you can get the report on impacts ) before proceeding to apply. The other point you need to consider is the patch 19 functionality and its immediate applicability as per your scenario.
Thank you,
Shyam -
Hello,
We are having MI 7.0 at SPS15.Am trying to apply add to our system(we created SDA file from NWA as an addon).SDA addon getting deployed but its not getting sync between ABAP and Java stack even if is run reload sever time from NWA->Administrator->Mobile Infrastructure->Mobile Components.I can see add-on when i check from SDM but it cannot see when i search under Mobile component in NWA.Application logs shows below error.
#703543993#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##8e6d577024d511e1a299001635730592#SAPEngine_Ap plication_Thread[impl:3]_10##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592001800000015000030100004B3E6C1311ED1#1323703575929#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##a19424a024d511e18ede001635730592#SAPEngine_Ap plication_Thread[impl:3]_9##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBea n#Plain####
#1.#001635730592000F00000016000030100004B3E6C662CEBE#1323703663073#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_ADMIN#47##n/a##d588777024d511e1c64a001635730592#SAPEngine_A pplication_Thread[impl:3]_18##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerB ean#Plain####
#1.#001635730592002000000015000030100004B3E6CDC2D7E4#1323703786809#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##1f482a9024d611e18dc1001635730592#SAPEngine_Ap plication_Thread[impl:3]_29##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#00163573059200260000000C000030100004B3E6D02A2DDA#1323703827137#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##37527e6024d611e1a43c001635730592#SAPEngine_Ap plication_Thread[impl:3]_39##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#00163573059200350000000B000030100004B3E6D1150767#1323703842528#/Applications #sap.com/tcwddispwda#com.sap.ip.mi.admin.wd.paramset.Details.Method-->wdDoModi fyView()#J2EE_ADMIN#56##uwsvt729.merck.com_VZ1_12609950#J2EE_ADMIN#2e05832024d61 1e1b753001635730592#SAPEngine_Application_Thread[impl:3]_33##0#0#Error#1#com.sap .ip.mi.admin.wd.paramset.Details#Plain###Specify all parameters#
#1.#00163573059200250000007C000030100004B3E6F8460AEE#1323704500063#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##c86ab33024d711e185b5001635730592#SAPEngine_Ap plication_Thread[impl:3]_22##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592002F00000015000030100004B3E728C1AF02#1323705313486#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##ad1da59024d911e1a138001635730592#SAPEngine_Ap plication_Thread[impl:3]_37##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
#1.#001635730592000F0000000000002A400004B3E754A629F8#1323706045836#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.serverAPI.CmsOrganizerAdapter#J2E E_GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[im pl:3]_26##0#0#Info#1#com.sap.cms.pcs.serverAPI.CmsOrganizerAdapter#Plain###CMS o rganizer proxy is waiting for requests#
#1.#001635730592000F0000000100002A400004B3E754A659EE#1323706045848#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.serverAPI.CmsManagerAdapter#J2EE_ GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl :3]_26##0#0#Info#1#com.sap.cms.pcs.serverAPI.CmsManagerAdapter#Plain###CMS manag er proxy is waiting for requests#
#1.#001635730592000F0000000200002A400004B3E754A6715D#1323706045854#/Applications /CMS/PCS#sap.com/tcSLCMS~PCS#com.sap.cms.pcs.transport.proxy.CmsLogViewer#J2EE GUEST#0##n/a##61feecc024db11e1b4cb001635730592#SAPEngineApplication_Thread[imp l:3]_26##0#0#Info#1#com.sap.cms.pcs.transport.proxy.CmsLogViewer#Plain###CMS Log Viewer is waiting for requests#
#1.#001635730592000F0000000300002A400004B3E754A67B77#1323706045857#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###CMS recovery servlet is wai ting for requests#
#1.#001635730592000F0000000400002A400004B3E754A67CE5#1323706045857#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###start recovery#
#1.#001635730592000F0000000500002A400004B3E754AA7F91#1323706046120#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###CMS recovery found 0 QueueItem(s) wi th state Import running in 0 queue(s). Start check if they are really running or need recovery.#
#1.#001635730592000F0000000600002A400004B3E754AA8344#1323706046121#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###Finished check and recovery for all CMS QueueItems of state Import running. Checked Items: 0; Recovered Items: 0; Re covery Failed Items: 0; Real running Items: 0#
#1.#001635730592000F0000000700002A400004B3E754AAACBA#1323706046132#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###CMS recovery found 0 QueueItem(s) wi th state Assembly running in 0 queue(s). Start check if they are really running or need recovery.#
#1.#001635730592000F0000000800002A400004B3E754AAAEE5#1323706046132#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.pcs.QueueItemRecovery#J2EE_GUEST #0#SAP J2EE Engine JTA Transaction : [0ffffffc069ffffff9e0008]#n/a##61feecc024db 11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0#Info#1#com.sap .cms.recovery.pcs.QueueItemRecovery#Plain###Finished check and recovery for all CMS QueueItems of state Assembly running. Checked Items: 0; Recovered Items: 0; Recovery Failed Items: 0; Real running Items: 0#
#1.#001635730592000F0000000900002A400004B3E754AAB68F#1323706046134#/Applications /CMS#sap.com/tcSLCMS~PCS#com.sap.cms.recovery.RecoveryServlet#J2EE_GUEST#0##n/ a##61feecc024db11e1b4cb001635730592#SAPEngine_Application_Thread[impl:3]_26##0#0 #Info#1#com.sap.cms.recovery.RecoveryServlet#Plain###finished recovery#
#1.#00163573059200140000000300002A400004B3E7AA40154F#1323707482010#/Applications #sap.com/tcmobileadmin~ea#com.sap.ip.mi.ejb.mcd.MobileContainerBean.Method---: Processfunction#J2EE_GUEST#0##n/a##b9c439d024de11e1a4ee001635730592#SAPEngine_Ap plication_Thread[impl:3]_10##0#0#Error#1#com.sap.ip.mi.ejb.mcd.MobileContainerBe an#Plain####
ThanksHi,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Ever wondered how and where the XI pipeline gets executed? It happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Take a look at the XI overview doc to understand this better,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a3d3c390-0201-0010-c490-bd85917138c8
Regards,
Bhavesh -
Short dump Error during VM container communication between ABAP and JAVA.
Hello All,
Can anybody please help with resolving the following issue:
Short dump is displayed, when I try to insert CRM product (type: material) in the document (opportunity). This CRM product was created in CRM directly.
When I try to insert ECC migrated material, everything works fine.
Here is the details of dump:
Short text
Error during VM container communication between ABAP and JAVA
Information on where terminated
Termination occurred in the ABAP program "SAPLPRC_INT" - in "GET_PRICING_PROCEDURE_INFO".
The main program was "SAPMHTTP ". In the source code you have the termination point in line 100 of the (Include) program "LPRC_INTF35".
Thank you!hi Willie,
this is the dump, and i have used the t-code sm52 . the VMC is not active.
|Short Text |
| Error during VM Container communication between ABAP and JAVA. |
|What happened? |
| The current program had to be terminated because of an |
| error when installing the R/3 System. |
| Error in the RFC layer. |
|What can you do? |
| Note which actions and entries caused the error to occur. |
| |
| Consult your SAP administrator. |
| |
| Using transaction ST22 for ABAP dump analysis, you can view, manage, |
| and retain termination messages for longer periods. |
|Error analysis |
| An error has occurred in the RFC layer during communication between |
| JAVA and the ABAP stack. This prevents data from being passed correctly |
| between the two stacks. |
| |
| Message = TH_VMC_SERV_NOT_ACTIVE |
| Return code = -1007 |
| Pointer = "000007DD348F6138" |
|How to correct the error |
| Check whether the VMC is active on your application server. To do this, |
| run transaction SM52. If the VMC is not active, contact your SAP |
| administrator. |
Regards
Charles -
WebDispatcher on ABAP and JAVA on serperate Servers
Hi all,
i read a lot of hours trough post concerning issues about web dispatcher, but i didn't find anything that suits my problem.
We have a MSCS-Cluster. One Node has the db which is for ABAP and JAVA (different schemas).
Than we have an SCS for ABAP and one for JAVA.
So the ABAP and JAVA-Instances are physically separated.
Now we want to use a web dispatcher to pass the requests to the right destination.
But i am not sure how to set it up. Do we need 2 dispatcher, or can one handle the requests. How does the dispatcher knows, where to redirect the requests ?
Is that done with the parameter icm/HTTP/redirect_<xx> ?
in hope of any advise to this problem
yours
BjoernTrabesSo, i tested around a little bit.
i am not clear with the function of the dispatcher.
When i bind the ABAP Dispatcher, than all requests to /sap/ are handled by the ABAP-Stack an are working, but when i browse to an Adress like /irj/portal/ the dispatcher says that the Adress is noch reachable.
When i bind the dispatcher to the Java-Stack, than all Java-Adresses work, but the /sap/ not, which is the ABAP Stack.
so, i don't know exactly where my fault is.
How knows the Dispatcher, where the ABAP or JAVA-Stack is.
On an other Machine where the java is an add-in, it works quite well, but on this server the abap and Java Servers are physically separated.
greets
Bjoern
Edited by: Björn Trabes on May 18, 2009 10:59 AM -
Hi friends,
If anybody knows how to refresh an abap and java systems (not abap+java addin)
can you please send the docs?
Thanks.Hi,
Plz check this link for ABAP refresh.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/fb/35c62bc12711d4b2e80050dadfb92b/content.htm">http://help.sap.com/saphelp_nw04/helpdata/en/fb/35c62bc12711d4b2e80050dadfb92b/content.htm</a>
Regards,
Subhasha Ranjan -
Whats the use of an ABAP and Java Stacks in XI? What exactly they are doing for XI?
Thanks.Hi,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Ever wondered how and where the XI pipeline gets executed? It happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
Take a look at the XI overview doc to understand this better,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a3d3c390-0201-0010-c490-bd85917138c8
Regards,
Bhavesh -
Wanted to confirm my understaing for ABAP and JAVA mapping.
Am I correct in my assumption that these mapping techniques can be used only if input and ouput is in XML format ?
So if XI is receiving a flat comma separated text/non-XML file or an IDOC for that matter and output is NOT in XML format, say again flat text file or IDOC, I cannot use above two techniques?
All the docs I have read suggest that 'Execute' method is called when XML file/data is received, paresed using DOM/SAX/JAXB (for Java mapping) or IXML lib (for ABAP mapping) and then create a output XML file.
-Thanks in advanceHi Bob,
Here you have a code sample for deescaping. I have have written this code a couple of time ago. The incoming file can be any text format. It might be XML, but not necessarily.
The main method is not reqired, but good for testing.
Regards
Stefan
* Created on 28.09.2005
* To change the template for this generated file go to
* Window>Preferences>Java>Code Generation>Code and Comments
package sample;
import com.sap.aii.mapping.api.*;
import java.io.*;
import java.util.Map;
public class Deescaping implements StreamTransformation{
public static void main (String[] args) {
try {
InputStream in = new FileInputStream(new File("in.xml"));
OutputStream out = new FileOutputStream(new File("out.xml"));
Deescaping change = new Deescaping();
change.execute(in, out);
} catch (Exception e) {
e.printStackTrace();
public void setParameter (Map map) {
public void execute (InputStream in, OutputStream out)
throws StreamTransformationException {
try {
int c;
while ((c = in.read()) != -1) {
if (c != '&') {
out.write(c);
} else {
// ampersand
String help = "&";
boolean exit = false;
// check the next 5 chars, if there is a ';'
for (int i = 0; i < 5 && !exit; i++) {
c = in.read();
if (c == -1) {
exit = true;
} else {
// another ampersand?
if (c == '&') {
out.write(help.getBytes());
help = "&";
i = 0; // check the next 5 chars
} else {
help = help + (char) c;
if (c == ';') {
exit = true;
if (help.equals("&")) {
help = "&";
if (help.equals("<")) {
help = "<";
if (help.equals(">")) {
help = ">";
if (help.equals(""")) {
help = """;
if (help.equals("'")) {
help = "'";
} // for
out.write(help.getBytes());
} // while
out.flush();
} catch (Exception e) {
throw new StreamTransformationException(e.getMessage(),e); -
Time out parameters for ABAP and JAVA instance
Hello All,
We are looking for Time out parameters for our ABAP and JAVA instances.
As users are complaining that they are getting time out error
while they are trying to access Cprojects from Portal.
I was able to check/collect the ABAP instance parameters from SMICM Tcode.
Can anybody tell me which parameters we need to look for JAVA instance.
Thanks in advance.
Regards,
Amber Sjstart/shutdownTimeout
(jstartup/shutdown_timeout)
Specifies the shutdown timeout, i.e. the grace period for the AS Java instance to shut down before the Java process terminates itself. Unt is in Seconds. Default is 120
j2ee/ms/connectTimeout
(jstartup/wait_for_scs)
Specifies the timeout for the first connection to the message server. The AS Java instance fails to start if this timeout expires.Unt is in Seconds.Default is 60
j2ee/ms/reconnectTimeout
(jstartup/wait_for_reconnect)
Specifies the timeout for the reconnecting to the message server.The AS Java instance shuts down when this timeout expires.Unt is inSeconds.Default is 3600 (one hour)
Thanks -
Links for ABAP and JAVA Admin + Troubleshooting
Hi Gurus,
Can anyone send me the useful links for Admin + Troubleshooting in SAP BASIS i.e. ABAP and JAVA ?
Also, which are the Routing Maintenance Tasks in SAP BASIS ?
Any / All help is most welcome and would be rewarded with suitable points.
Many Thanks in Advance ,
Regards,
- IshanHello Balaji,
Yes, you can connect the JAVA user adminsitration with the Single CUA.
Make use of the JAVA UME feature for this.
http://help.sap.com/saphelp_nw04/helpdata/en/49/9dd53f779c4e21e10000000a1550b0/content.htm
Regards,
Ammey Kesarkar
Maybe you are looking for
-
Posting an XML Variable to a BLS Transaction from a web page
I am working in xMII 11.5 with all the latest service packs. I know this is probably a really basic question but I am stumped. I am trying to pass a multi row and multi column XML data set from a web page into a BLS transaction (actually, two of them
-
Hello All: I am facing an issue, with opening pdf forms using webdynpro applcaions, after applyign support stacks. I am using linktoaction UI element to display a pdf form which is stored in mimereporsitory, and i am displaying it after getting URL.
-
Im doing a CRC for a txt file. So after the CRC calculation i got the 16bit check sum. How should i add the 16 bit to the file? The file is generated base on various objects. So it would be very good if i could convert the 16 bits into String and the
-
SYS_CONTEXT usage taking time for first run
Hi all, we have a screen(search) with conditions like make, manufacturing date, region, etc upto 20 conditions. User can restrict the result he wants based on the filters specified. As there are more parameters, a static query was takign a lot of tim
-
Turned off "save as PDF" with Preview.
Big mistake. This was an original setting under File > Print. How can I turn it back on?