ABAP Client Proxy error code: 401, error text: Unauthorized

Hi,
I have Client proxy in ECC for oubound interface in PI 7.0, when i look into SXMB_MONI of ECC i can see my message with Error "HTTP response contains status code 401 with the description Unauthorized Authorization error while sending by HTTP (error code: 401, error text: Unauthorized)".
As per few thread i already assign SAP_XI_APPL_SERV_USER role to PIAPPLUSER in ECC, still i am getting same eror.
I do not understand how this Proxy communication work, which ECC user will be use in communication and how this communcation link to RFC destination "SAP_PROXY_ESR" type G. Even i can not see type H in ECC so i created RFC destination of type G.
With Regards
Sunil

We were able to get it working by making a change in the Integration Engine Configuration (in sxmb_adm).
Changed "Corresponding Integ. Server" from "http://<server>:<port>/sap/xi/engine?type=entry"
to "dest://RFCdestinationName"

Similar Messages

ABAP client proxy 401 error

Hi i have generated a ABAP client proxy in my ECC system and sending an outbound message to XI. i get the following error.
HTTP response contains status code 401 with the description Unauthorized Error while sending by HTTP (error code: 401, error text: Unauthorized)
I have tested the following.
1) My sld and ECC system have the integration engine and pipeline settings for the XI Server: http://server:8000/sap/xi/engine?type=entry
2) logon to the URL http://server:8000/sap/xi/engine with user XIAPPLUSER and pwd in the browser because of the error 'Der Aufruf der URL http://server:8000/sap/xi/engine wurde aufgrund fehlerhafter Anmeldedaten abgebrochen'
any sugestions ? using a proxy as target works fine

Hi ,
You seem to have a problem with the XIAPPLUSER logon. Can you check that the user has the appropriate authorizations? Maybe the user is locked? Maybe the password has been incorrectly entered?
XIAPPLUSER should have the role SAP_XI_APPL_SERV_USER.
Also, check that the XI engine service has been activated.
Transaction SICF. Default_host->sap->xi Activate the entire node with all subtrees.
Cheers
Manish

Proxy: Error code 401

Hi,
In my file to proxy(XI adapter), i am getting the following error:
"<i>HTTP response contains status code 401 with the
description User not authorized for message
processing</i>"
The user that i am using on the xi adapter has the role "SAP_XI_APPL_SERV_USER" added.
Is there something that i am missing

The message fails on a step where it calls the XI adapter. Here is the message from the pipeline:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>User not authorized for message processing</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><body><H1>SAP Integration Engine</H1><BR />User not authorized for message processing.<BR /></body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>HTTP response contains status code 401 with the description User not authorized for message processing Authorization error when sending using HTTP (error code: 401, error text: User not authorized for message processing)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Error code 401:"HTTP_RESP_STATUS_CODE_NOT_OK"

Hi Experts,
Messages are failed in SXMB_MONI with the Error code 401:"HTTP_RESP_STATUS_CODE_NOT_OK"
Text message "Unauthorised".
-->No users was locked & All users are maintaining perfect roles, no password problem.
2.Messages are processing successfully from Adapter Engine to Integration Engine and after executing all the pipeline steps through XI adapter the messages are sending to receiver successfully (File to XI Adapter)
3.But in the case of Integration Engine(After executing all the pipeline steps) to Adapter Engine the messages are failed with the above error code (XI to File Adapter).
and also can any body tell me what is the JRFC Function module which is executing in between these two.
Can any body give me the solution ASAP.
Thanks & Regards
Sankar

Hi,
-->Aroan, I have gone through that OSS note already, we done not have any load on the J2EE engine only 4 interfaces are running.
-->XIAPPLUSER is maintaining the role, it is J2EE port only. where can i check the port is locked or not.
I think if port is locked then there is no messages will be processed for any interfaces.
can any body give me the solution ASAP.
Regards
Sankar

Error With ABAP Client proxy

Hi All,
   I am trying to use ABAP Client Proxy(Sync). I am getting the error.
1. Message from SXMB_ADMIN on Business system.
<b> <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
<SAP:Context />
<SAP:Code p1="400" p2="ICM_HTTP_CONNECTION_FAILED" p3="" p4="">HTTP.HTTP_CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:Text language="EN">Error during http receive: Error code: 400 Error text: ICM_HTTP_CONNECTION_FAILED</SAP:Text>
</SAP:ErrorHeader></b>
2. No message On XI server.
3.Went through the Ravikumar Allampallam's blog
on ABAP ClientProxy .
4. Went through the vijaya kumari's " How do you activate ABAP Proxies?"
5. created connections (sld)and one http connections in SM59. Tested the connections.
6. Went throught the Forms.
Any help would be appriaciated.
Thank you
Ganges Leaves.

Vijaya Kumari,
   1. I have checked it. For XI server these are the values.
    Business System Role : Integration Server.
    Pipe Line url : http://server:8000/sap/xi/engine?type=entry.
8000 is the http port which i see in the SMICM+shift F1.
Thank you
Ganges Leaves

Proxy to File - CLIENT_RECEIVE_FAILED - error code: 200, error text:

I have configured a Proxy to JDBC scenario from a new ECC dev system and it works great. I recently tried migrating the changes to the new ECC qas environment and I get the following error message. Can anyone help, I must have missed some configuration somewhere?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>200</SAP:P1>
<SAP:P2>Error Parsing Response. No XI Response Received.</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html> <head> <title>SAP J2EE Engine Start Page</title> </head> <frameset framespacing="0" border="0" rows="90,*" frameborder="0"> <frame name="banner" scrolling="no" noresize target="contents" src="top.html" marginwidth="0" marginheight="0"> <frame name="main" src="main.html" marginwidth="10" marginheight="30" scrolling="auto"> <noframes> <body> <p>This page uses frames, but your browser doesn't support them.</p> </body> </noframes> </frameset> </html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 200, error text: Error Parsing Response. No XI Response Received.)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>

Hi!
I think what michal told is correct there is a connectivity issue but please make sure regarding mapping also why it is unable to receive the response...
Actually ERROR 200 code means::
Description: The request has succeeded. The information returned with the response is dependent on the method used in the request GET an entity corresponding to the requested resource is sent in the response; HEAD the entity-header fields corresponding to the requested resource are sent in the response without any message-body; POST an entity describing or containing the result of the action; TRACE an entity containing the request message as received by the end server.
Possible Tips:
Have a look into SAP Note: 871959..
I know this is not an exact answet but this ill give u some idea..
Regards::
Amar Srinivas Eli

Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Hi experts,
I have a big issue in production server,
the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
if i am reprocess or press F6 it is going manually.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31"> </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">© 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Regards,
Kiran polani

Dear Sriram Ramani,
in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
but my problem is in Soap to RFC case..
for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
not for all signals for few signals for some time..
Why it is happening i can't understand.
in repository it is saying Repsitory object hmi failed and address already in use.
is there any problem with loading IR objects.
Please suggest me good suggestion for this type of issue what can do for this to resolve.
Regards,
Kiran Polani

CLIENT_SEND_FAILED error code: 500, error text: Internal Server Error

Hi,
Developed Proxy <-->PI<-->JDBC SELECT scenario and getting the following error.
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>500</SAP:P1>
<SAP:P2>Internal Server Error</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 500, error text: Internal Server Error) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
When I cross checked the JDBC Receiver communication channel in Runtime Work Bench
request and response were successfull. RWB shows the following message.
2009-06-12 09:34:50 Information The message was successfully received by the messaging system.
2009-06-12 09:34:50 Information Message successfully put into the queue.
2009-06-12 09:34:50 Information The message was successfully retrieved from the request queue.
2009-06-12 09:34:50 Information The message status was set to DLNG.
2009-06-12 09:34:50 Information Delivering to channel: DB2ReceiverTableSPT
2009-06-12 09:34:50 Information JDBC Adapter Receiver processing started, required QoS BestEffort
2009-06-12 09:34:50 Information JDBC Adapter Receiver Channel DB2ReceiverTableSPT:
2009-06-12 09:36:35 Information Database request processed successfully.
2009-06-12 09:36:35 Information The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2009-06-12 09:36:35 Information The message status was set to DLVD.
I had gone thru all the previous threads related to 'CLIENT_SEND_FAILED' but
those did not solve my problem.
Can some one help me to solve this issue.
Thanks,
Vijay.

I made necessary changes as per the blog. Appended '_response' for JDBC response structure.
Still I am facing same problem.
Strange....delibarately gave the link so that you can cross-check the JDBC config on receiver side...I assume that the proxy is configured properly with the Sync communication....also mapping is done accordingly...
Regards,
Abhishek.

Making a REST webservice call. Error code: 401 Access to the requested resource is not allowed

Hi All,
I’m having a hard time figuring out how to make Rest WebService calls.
I tried executing this directly through browser and I get an error.
http:localhost:8080/rest/bean/atg/userprofiling/ProfileServices/loginUser?arg1=[email protected]&arg2=Password
13:18:20,613 ERROR [RestSecurityServlet] Error code: 401
Access to the requested resource is not allowed: /atg/userprofiling/ProfileServices
atg.rest.RestException: Access to the requested resource is not allowed: /atg/userprofiling/ProfileServices
at atg.rest.processor.RestSecurityProcessor.checkAccess(RestSecurityProcessor.java:546)
at atg.rest.processor.RestSecurityProcessor.handleGetRequest(RestSecurityProcessor.java:313)
at atg.rest.processor.RestSecurityProcessor.doRESTGet(RestSecurityProcessor.java:199)
at atg.rest.servlet.RestPipelineServlet.serviceRESTRequest(RestPipelineServlet.java:417)
at atg.rest.servlet.RestPipelineServlet.service(RestPipelineServlet.java:260)
at atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:320)
at atg.rest.servlet.RestPipelineServlet.service(RestPipelineServlet.java:264)
at atg.rest.servlet.HeadRestServlet.service(HeadRestServlet.java:130)
at atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:267)
From the documentation I understand that I need to create a session, is the session only necessary to access secured components since this
particular method “ProfileServices.loginUser “ has been declared as not secure in restSecurityConfiguration.xml
Also, are there two different ways in which I can log in
1. Using RestSession.createSession providing the username and password.
2. Or using ProfileServices.loginUser or ProfileFormHandler
Can someone please clarify

If you are invoking the REST web-service from a Java client then you can create a RestSession object using the createSession method. But in your case you seem to be invoking it with a HTTP request which by default would be treated as a GET request by ATG's REST implementation. Therefore being a GET, it would try to fetch a property "loginUser" from /atg/userprofiling/ProfileServices component (based on your URL) which would always fail.
To invoke loginUser() method of ProfileServices with your passed argument you need to tell ATG's REST system to treat your incoming request not as GET but as a POST request which you can do using atg-rest-http-method control parameter in your request like this
http:localhost:8080/rest/bean/atg/userprofiling/ProfileServices/loginUser?arg1=[email protected]&arg2=Password&atg-rest-http-method=POST
It should work this way provided your restSecurityConfiguration.xml is proper.

Creative Cloud Installation Failed Download Error - Error Type -7 and Error Code - 401

I subscribed to Creative Cloud in December 2012 and have been trying to install the applications, but the "Installation Failed" through the Adobe Application Manager. (see screenshot)
Here is a line from my log file:
01/08/13 11:08:48:346 | [WARN] | | ASU | PDApp | DownloadError | | | 6120 | Download Error has come with GDE Error type - -7 and error code - 401
I tried searching for the same error code in the "knowledge base" but couldn't locate any.
I am on a Windows 7 (x64) machine. I also have CS5.5 installed.
Anyone have this problem? Please help or point me in the right direction if you can. Thanks!

Thanks Romsinha,
   I tried the above steps, with no luck. I have admin rights on both laptop and desktop I'm trying to install to. I have updated my AAM on both machines with no issue (when using the direct link above). But when I click the 'Try' link to download an application, it shows the scrolling status bar for a few seconds, then "Installation Failed" 'Download error. Press Retry to try again or contact customer support. (-7)'   Retry only produces same results.
Both machines are running Win 7 Pro - SP1 64bit
     (laptop - 16 GB RAM & Core i7-2760QM 2.40 GHz processor)
     (desktop - 8 GB RAM & Xeon W3520 2.67GHz processor)
I am running in a corporate setting with I'm sure all sorts of Firewall protection etc...
I'm planning on asking for a CC membership, but wanted to check out the new features first....
Thanks!

Error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

Every now and then we are getting the following error on a synchronous call from XI 3.0.
Error when receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)
Usually it is from XI to R/3 (that's where most of our synch calls take place) but occasionally it happen on a synchronous call to a JDBC comm channel.
It is not just one interface that causes this issue and the same interface will be OK if we re-run it with same data.
I suspect some system parameter is off, or it's just a bug in XI. Any one else run into this ? if so, have you found a fix ? SAP hasn't been much help for us thus far.
Thanks in advance for any help.

Hi Tim,
Can you check this thread-
ICM_HTTP_CONNECTION_FAILED
Also check SAP Note 824554,783515,910649,706563.
Cache Refresh~
https://websmp201.sap-ag.de/~sapdownload/011000358700003163902004E/HowTo_handle_XI_30_Caches.pdf
Hope this helps,
Regards,
Moorthy

Error code: 110, error text

Hi all,
While working with Soap Adapter and when the pay load is more 2.7MB i am getting the below error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>110</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
The above error is raised only when the payload is moe ,if I send 1mb payload its working fine.
Any inputs would be helpful.
Thanks,
Srinivasa

Hi ...
Check out this part of the following blog : /people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
      Hi,
      what about the http response code 110.
      I get lot of errors in SAP Exchange Infrastructure in SXI_MONITOR:
      - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>110</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error when receiving by HTTP (error code: 110, error text: )</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
      Any idea?
      With kind regards.
      Martin Steinberg
      SXI_CACHE
      2007-10-11 13:45:49 Marco Salazar SAP Employee Business Card [Reply]
      to solve this try in the INTEGRATION_DIRECTORY_HMI destination put in the path field /dir/hmi_cache_refresh_service/ext
      Query
Thanks,
Pooja Pandey

Error code: HTTP_RESP_STATUS_CODE_NOT_OK error text: HTTP response contain

Hi Gurus
I got this error in Alert monitoring please any one can guide me how can i resove this...
Error code: HTTP_RESP_STATUS_CODE_NOT_OK error text: HTTP response contains status code 500 with the descri
Thanks

Hi Mohana,
the major reason would be an internal access with pwd aunthentication
Error: 500 Internal Server Errors
Description: The server encountered an unexpected condition which prevented it from fulfilling the request.
Possible Tips: Have a look into SAP Notes u2013 804124, 807000
Thanx
Sampath

How do I fix error code 401 - "unauthorized" I am taking an online class and the videos worked before, and now whenever I launch QuickTime, I get that error code.

I recently began taking an online class. We are required to watch multiple videos. I was able to watch the QuickTime videos before, but now whenever I launch the videos in QuickTime I get the Error code 401. My teacher does not know whats wrong, because I do have authorization to watch the videos, I am just not sure how to go about it.

You may try updating the same as a standalone download.
S.Sengupta, Windows Entertainment and Connected Home MVP

ABAP client proxy send message fialed

I developed one ABAP client proxy to send msg. status in SXMB_MONI is error.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
After I test it in RWB,I'm sure that IR and ID is right. Then what's wrong?

> There are two scenarios with the same outbound interface.Is it the problem?
>
> ABAP proxy send message, and then there are two route.
Yes this could be the reason, because at the time of Receiver Determination it tries to send the message to both the interface. Are both the scenario Proxy to XI??
Try to change the Message Interface in IR and accordingly change in ID also and then try.
Regards,
Sarvesh
Edited by: Sarvesh Singh on Oct 17, 2008 2:24 PM

ABAP Client Proxy error code: 401, error text: Unauthorized

Similar Messages

Maybe you are looking for