ABAP code for character search
Hello Gurus
I have a variable e.g. lv_txtsh which is meant to store a string. Now I want to parse through lv_txtsh and find if it contains a character "x". The length of the string stored in lv_txtsh is going to be dynamic. Can you please help me to code this scenario in ABAP OO (the new version of ABAP)
Any help is appreciated and points will be assigned.
Thanks,
Rishi
Hi,
Pease go through this. You will get an idea.
FIND
Syntax
FIND [{FIRST OCCURRENCE}|{ALL OCCURRENCES} OF] pattern
IN [section_of] dobj
[IN {BYTE|CHARACTER} MODE]
[{RESPECTING|IGNORING} CASE]
[MATCH COUNT mcnt]
{ {[MATCH OFFSET moff]
[MATCH LENGTH mlen]}
| [RESULTS result_tab|result_wa] }
[SUBMATCHES s1 s2 ...].
Extras:
1. ... {FIRST OCCURRENCE}|{ALL OCCURRENCES} OF
2. ... IN {BYTE|CHARACTER} MODE
3. ... {RESPECTING|IGNORING} CASE
4. ... MATCH COUNT mcnt
5. ... MATCH OFFSET moff
6. ... MATCH LENGTH mlen
7. ... RESULTS result_tab|result_wa
8. ... SUBMATCHES s1 s2 ...
Effect
: The data object dobj is searched for the byte or character sequence specified by the search string pattern. The addition OCCURRENCE[S] determines whether only the first, or all occurrences are searched. The addition section_of can be used to restrict the search range. The addition CASE is used to determine whether upper/lower case is taken into account in the search. The additions MATCH, SUBMATCHES, and RESULTS are used to determine the number, position, and length of the found sequence(s).
The search is ended when the search string is found for the first time or when all the search strings in the search range have been found, or when the end of the search range is reached. The user is informed of the search result by setting sy-subrc.
In character string processing, the closing blanks are taken into account in data objects dobj of fixed length.
Note
The statement FIND IN TABLE is available for searching in internal tables.
System fields
sy-subrc Meaning
0 The search string was found at least once in the search range.
4 The search string was not found in the search range.
8 The search string contains an invalid double-byte character in character string processing.
Addition 1
... {FIRST OCCURRENCE}|{ALL OCCURRENCES} OF
The optional addition {FIRST OCCURRENCE}|{ALL OCCURRENCES} OF determines whether program only searches for the first occurrence, or all occurrences of the search string. If the addition FIRST OCCURENCE, or none of the additions is specified, only the first occurrence is found. Otherwise, all occurrences are found.
If sub_string is an empty string in the pattern or is of type c, d, n or t and only contains blank characters, when searching for the first occurrence, the space in front of the first character or byte of the search range is found. If searching for all occurrences, in this case the exception CX_SY_FIND_INFINITE_LOOP is triggered.
If regex contains a regular expression in pattern that matches the empty character string, the search for one occurrence also finds the space before the first character. When searching for all occurrences, in this case, the search finds the space before the first character, all intermediate spaces that are not within a match, and the space after the last character.
Addition 2
... IN {BYTE|CHARACTER} MODE
Effect
: The optional addition IN {BYTE|CHARACTER} MODE determines whether byte or character string processing takes place. If the addition is not specified, character string processing is performed. Depending on the processing type, dobj and sub_string in pattern must be byte-like or character-type. If regular expressions are used in pattern, only character string processing is permitted.
Addition 3
... {RESPECTING|IGNORING} CASE
Effect
: This addition is only permitted for character string processing. It determines whether upper/lower case is taken into account in pattern and dobj when searching. If RESPECTING CASE is specified, the text is case-sensitive, and if IGNORING CASE is specified, the text is not case-sensitive. If neither of the additions is specified, RESPECTING CASE is used implicitly. If a regular expression is entered for pattern as an object of the class CL_ABAP_REGEX, this addition is not permitted. Instead, the properties of the object are taken into account in the search.
Addition 4
... MATCH COUNT mcnt
Effect
: If the search string pattern is found in the search range, the addition MATCH COUNT stores the number of found locations in the data object mcnt. If FIRST OCCURRENCE is used, this value is always 1 if the search is successful. For mcnt, a variable of the data type i is expected. If the search is unsuccessful, mcnt is set to 0.
Addition 5
... MATCH OFFSET moff
Effect:
If the search string pattern is found in the search range, the addition MATCH OFFSET stores the offset of the last found location in relation to the data object dobj in the data object moff. If FIRST OCCURRENCE is used, this is the offset of the first found location. For moff, a variable of the data type i is expected. If the search is not successful, moff contains its previous value.
Note
: The system field sy-fdpos is not supplied by FIND.
Addition 6
... MATCH LENGTH mlen
Effect:
If the search string pattern is found in the search range, the addition MATCH LENGTH stores the length of the last found substring in the data object mlen. If using FIRST OCCURRENCE, this is the length of the first found location. For mlen, a variable of data type i is expected. If the search is not successful, mlen contains its previous value.
Addition 7
... RESULTS result_tab|result_wa
Effect:
If the search string pattern is found in the search range, the addition RESULTS stores the offsets of the found locations, the lengths of the found substrings, and information on the registers of the subgroups of regular expressions, either in an internal table result_tab or in a structure result_wa.
The internal table result_tab must have the table type MATCH_RESULT_TAB, and the structure result_wa must have the type MATCH_RESULT from the ABAP Dictionary. The line type of the internal table is also MATCH_RESULT.
When an internal table is entered, this is initialized before the search and a line is inserted in the table for every match found. When a structure is entered, this is assigned the values of the last found location. If FIRST OCCURRENCE is used and the search is successful, only one line is inserted in the internal table.
The line or structure type MATCH_RESULT has the following components:
OFFSET of type INT4 for the offset of the substring
LENGTH of type INT4 for the length of the substring
SUBMATCHES of table type SUBMATCH_RESULT_TAB with the line type SUBMATCH_RESULT for the offset and length of the substrings of the current found locations that are stored in the registers of the subgroups of a regular expression.
The lines of result_tab are sorted according to the columns OFFSET and LENGTH. An additional component LINE is only important in the variant FIND IN TABLE.
Following an unsuccessful search, the content of an internal table result_tab is initial, while a structure result_wa contains its previous value.
Note
The addition RESULTS is particularly suitable for use with the addition ALL OCCURRENCES when specifying a table, and for use with the FIRST OCCURRENCE when specifying a structure.
Example:
The following search for a regular expression finds the two substrings "ab" at offset 0 and "ba" at offset 2, and fills the internal table result_tab with two rows accordingly. As the regular expression contains three subgroups, the component submatches contains three lines in each case. The first line of submatches refers to the outermost bracket, the second line refers to the first internal bracket, and the third line refers to the second internal bracket. For the first found location, the first and second lines contains the offset and length while the third line is undefined. For the second found location, the first and third lines contains the offset and length, while the second line is undefined.
DATA: result_tab TYPE match_result_tab.
FIND ALL OCCURRENCES OF REGEX `((ab)|(ba))`
IN 'abba'
RESULTS result_tab.
Addition 8
... SUBMATCHES s1 s2 ...
Effect:
This addition is only permitted if a regular expression is used in pattern. The current contents of the register of subgroups of the regular expression for the current found location are written to the variables s1, s2, ..., for which a character-type data type is expected. When ALL OCCURRENCES is used, the last found location is evaluated. If more variables s1, s2, ... are listed than subgroups are available, the superfluous variables are initialized. If fewer variables s1, s2, ... are listed than subgroups are available, the superfluous subgroups are ignored.
Example
: The regular expression after REGEX has two subgroups. The search finds the substring from offset 0 of length 14. The content of the register of the subgroups is "Hey" and "my".
DATA: text TYPE string,
moff TYPE i,
mlen TYPE i,
s1 TYPE string,
s2 TYPE string.
text = `Hey hey, my my, Rock and roll can never die`.
FIND REGEX `(\w)\W\1\W(\w)\W+\2`
IN text
IGNORING CASE
MATCH OFFSET moff
MATCH LENGTH mlen
SUBMATCHES s1 s2.
Reward points if helpful.
Thanks and Regards.
Similar Messages
-
Needs sample ABAP code for field routine
Dear Expert,
There is a field "Pay Scale Group" in my DSO which stores the data in the format
AA1/B1/CCC2/DD2/EEE1, A1/BB2/CC2/DDD3/EE2 etc. These data has to be transferred to
InfoCube where "pay Scale Group" in the InfoCube will store the data like EEE1,EE2 etc.
I need to write a field routine on the transformation between DSO and Cube.
Can any one please help me with the sample ABAP code for this scenario.
Some more examples for better understanding of the requirement:-
Data in DSO(Source) Data in Cube(Target)
=================== ===================
AA1/B1/CCC2/DD2/EEE1 EEE1
AAA1/BB2/CC1/DDD3/EE2 EE2
A2/BBB2/CC2/DDD3/EEE5 EEE5
AA2/BB1/C1/DDD3/EE3 EE3
A3/B1/CC2/DDD1/EE4 EE4
Many thanks in advance.
Regards,
Prakash
Please do not dump your code requirements in SDN
Edited by: Pravender on May 18, 2011 11:37 AMHi,
You can use the following code :
Suppose the technical name of the field coming from DSO is ZPAY_SGRP.
And also for example let me take one record, that is ZPAY_SGRP = AA1/B1/CCC2/DD2/EEE1 .
My assumption is that there will always be 4 '/'.
In the field routine write the below code
data: V1(5) type c,
V2(5) type c,
V3(5) type c,
V4(5) type c,
V5(5) type c.
data : VAR1 TYPE /BIC/OIZPAY_SGRP.
split VAR 1 at '/' into V1 V2 V3 V4 V5.
result = V5.
V5 will be having the characters after the last '/' .That is V5 = EEE1.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh
Edited by: Ashutosh Singh on May 17, 2011 3:53 PM
Edited by: Ashutosh Singh on May 17, 2011 4:17 PM -
ABAP code for BI 7.0 transformations start routine
Hi all,
I am trying to update data from DSO1 (Source1: transaction data) to Infocube(TARGET)
In the transformations Start routine, I have to read DSO2(Source2: Master data) for some fields.
DSO1 has CUSTOMER as part of key
DSO2 has CUSTOMER (key) and other fields....FIELD1, FILED2, FIELD3
Infocube to be updated with FIELDS1,2 & 3 WHILE READING DSO2.
WHERE DSO1 CUSTOMER matches with DSO2 CUSTOMER.
Also, data NOT TO BE UPLOADED into Infocube if FIELD1 in DSO2= NULL
Please give me the abap code for the above logic.
Appreciate any help in this regard.
Thanks.This is a doc from this site:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6090a621-c170-2910-c1ab-d9203321ee19
Ravi Thothadri -
How To Create ABAP Code For HR Context Sensitive Structural Authorization
Hello,
We have created a HR Custom Program which IS NOT built off the PCH or PNP Logical Database. As a result, we need to manually create ABAP code for HR Context Sensitive Structural Authorization Check in our custom HR program. Via HR Context Sensitive Structural Authorizations, we are restricting access to personnel numbers and the underlying HRP* tables.
Any assistance would be greatly appreciated with the identification of the SAP standard function modules (Ex. RH_STRU_AUTHORITY_CHECK, HR_CHECK_AUTHORITY_INFTY, HR_CHECK_AUTHORITY_INFTY , etc) used in HR Context Sensitive Structural Authorization Check, how they are used to control HR Structural authorization (P_ORGINCON), and some sample code.
Thank you in advance for all your assistance,
Ken BowersHello Ken
You can use the interface methods IF_EX_HRPAD00AUTH_CHECK to get the same structural authorization as you can see in PA20/PA30. You need to use the methods set_org_assignment and check_authorization for this purpose. For more information you can refer to include FP50PE21 from line 237 onwards till 270.
Regards
Ranganath -
Need ABAP code for the below Services requirement
Hi,
We have a requirement to show all the services for a particular Purchase order number.For this I built a view on 2 tables ESLL and EKPO.Now based on the below logic I need to bring the services for the Purchase order..
1.Enter PO number,item no. and Doc category in EKPO and find the Pack no.
2.Now take the Pack no. of EKPO and give in ESLL and find the Sub pack no.
3.Now take this Subpack no. and Give this sub pack as Pack no. in ESLL
4.This will be the Service entry record for that PO number.
Can any one Please suggest me to how to write the ABAP code for the above logic.
Thanks & Regards,
DinakarHi Dinaker,
Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
Thanks,
SAPBWI -
GRR2- 4FM-RepPaint(put ABAP code for convert data in field)
Hi,
If somebody know how possible add ABAP code for convert data in some column-field of report (by RepWriter,UserExit,BADI)?
Thanks a lot.Elaborate your question. Not clear ??
-
ABAP code for wrting a file to application server
<Moderator Message: We are not here to do your job for you>
Hi All,
i have a requirement to get the data from some other ABAP program and this data has to be written in one of the files present in application server.
please provide me the exact ABAP code for this...
Edited by: Siegfried Szameitat on Dec 17, 2008 10:40 AMthis has to be done using a process chain
-
Hi Friends,
I have created BI objects like infocubes, infoobjects, DTP, Datasource to transfer data from a flat file to BI system using SAP GUI... All data from flat file are transfered to BI successfully... i dont have any knowledge in ABAP... So i need to see the ABAP code for the BI objects i created above in my project... how can i see the coding for that?
thanks in advance
sasiHi Sasi,
All the objects which you create in BI will be stored in some standad tables,it only fetch details accordingly from those tables.For MasterData you can find the option as Display Routines in Extras.If you want to get more infomation about the STD Table and the Program involed in BI objects,just enter in (/h) mode.
Regards,
Prem -
Abap code for sap exit variables?
Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.Please tell how u solved ur issue i have the same scenario to be do.
-
ABAP Code for SAP exit varaibles?
Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.Hi Kumar,
Try this below mentioned example where default date is current date.
Step1: Create a variable(ex: cur_date) on requrired characteristic with Processing type "Customer Eixt" and check the check box for ready for input(if this variable need in selection screen).
Step 2: Goto T Code : CMOD and provide appropriate Project and choose components and click on display.
Step3: Double click on exit "EXIT_SAPLRRS0_001" you can see include "ZXRSRU01", double click on include.
Step4: Sample code to populate.
WHEN 'CUR_DATE'.
Data : l_p_range_SSS TYPE rrrangesid.
IF I_STEP = 1.
l_p_range_SSS-Low = sy-datum.
l_p_range_SSS-Sign = 'I'.
l_p_range_SSS-Opt = 'EQ'.
APPEND l_p_range_SSS TO e_t_range.
Endif.
The following values are valid for I_STEP:
· I_STEP = 1
Call up takes place directly before variable entry
· I_STEP = 2
Call up takes place directly after variable entry. This step is only started up when the same variable could not be filled at I_STEP=1.
· I_STEP = 3
In this call up, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called up again.
· I_STEP = 0
The enhancement is not called from the variable screen. The call up can come from the authorization check or from the Monitor.
Also, refer this link..
http://help.sap.com/saphelp_bw320/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/content.htm
Cheers,
Allen -
ABAP code for Hierarchy Loading from Flat File
Hi,
Can anyone give me some idea / ABAP code for generating parent - child relationships (NODEIDS) from a flat file and load into BW.
Best regards
Any insight into this development is highly appreciatedHi,
also have a look at this how to to get informations about the file structure:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb
/manfred -
Hi All,
I have requirement to write code for date range.
Characterstic = Run-Out Date, it was created reference to 0Date.
Requirement is data should load depends on Run-Out Date 7 days old and 14 days future.
Logic is -7 days old >= Run_out date <= 14 days future.
please let me know how I need to proceed with ABAP code for this requirement.
Thanks.
Please do not ask for ABAP code here. Its not a training forum
Edited by: Pravender on Aug 18, 2011 1:46 AM>
Sree vignesh wrote:
> Hi,
> In the select option we have a field month range as
> SELECT-OPTION : FROM 01.2007 TO 01.2009 " Let say Ur Selection option is SO_MONTH
> but now i need to add the DMBTR field considering the month range in the SELECT OPTION i.e., only FROM 01.2007 TO 01.2009 i mean without 2006 data.
>
> LOOP AT LT_DATA WHERE month in SO_MONTH. " Here add a Where condition
> ls_output-matnr = lt_data-belnr.
> ls_output-werks = lt_data-bukrs.
> ls_output-lgort = lt_data-dmbtr.
>
> COLLECT ls_output INTO lt_output .
>
> ENDLOOP.
>
> please help with code .
>
> thanks in advance.
Regards,
Suneel G -
Sample ABAP code for userexits, and calling bapi's
Hi,
Can someone please send me sample ABAP code
1) to do extractor enhancement using user exit.
2) ABAP program to call BAPI to read live cache order series data in SNP and write to Idocs through some ports.
3) ABAP routine to generate file name (based on date/country)in the infopackage to upload flatfiles.
Thank you very much in advance and appreciate any help.
Regards
Prasadhai ,
check this code...
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
Error in the ABAP Code for Customer Exit Variable
Could you please update me what is the wrong with the below ABAP Code developed for Customer Exit Variable in BW
i created a Variable (ZVWKNO) of Customer Exit,Single Value ,Mandatory and Variable is ready for input
In CMOD i had written the below Code:
When 'ZVWKNO'.
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
But when i execute the query the default value is not populated with Week-1 No in the variable screen
Please update me what went wrong
ThanksCase ZVWKNO. "write this with out comments
When '1'. "write the value that needs to equal with value in varaible ZVWKNO after when in sungle quotes
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0. "check this Week Minimum is '01' and Maximum '52'
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
Prabhudas -
ABAP Code for summation of key figure
Hi Guys,
I am new to ABAP and my requirement is as follows-
I have an infocube containing data like
Location Item Amount Month
India TV 10 Jan
India DVD 10 Jan
India XBOX 10 Jan
US TV 10 Jan
US XBOX 15 Jan
US DVD 20 Jan
UK XBOX 30 Jan
UK TV 20 Jan
UK DVD 15 Jan
India TV 20 Feb
US DVD 20 Feb
UK XBOX 10 Feb
India TV 20 Mar
Now by using open hub, I want to extract a file which would display report as -
Output file
15-Oct-2010
Location Item Amount
India TV 50
India DVD 10
India XBOX 10
US TV 10
US DVD 40
US XBOX 15
UK TV 20
UK DVD 15
UK XBOX 40
which means it should sum based on combination of location and item and create one single row.
I need some ABAP code which could be written in expert routine so as to to calculate single rows of amount for all data packets of infocube.
Kindly suggest on how to proceed on it.
Thanks in advance
Moderator Message: Even if you are new-to-ABAP, it does not imply that you can expect others to do your work. If you are a BI consultant, take the help of an ABAP consultant or self-learn the basic concepts of ABAP. If you are an ABAPer, go back to the training center.
Edited by: kishan P on Oct 15, 2010 10:34 AMFollow this white paper .... called, "How to .... Calculate with Attributes":
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/72f4a790-0201-0010-5b89-a42a32223ffc
Brian
Maybe you are looking for
-
Multiple BPEL/ Mediator payloads how to store in DB using DB adapter.
I have huge XML which is XSD define for the same and have complex types which required around > 50 DB tables to store the entire XML. Have one parent table which has reference ID to child tables. Now first I want store the parent table and get the ID
-
Software Updater ran, restarted, booted from external FW HD for no reason??
I did a Software Update yesterday and got the latest iWeb and Quicktime. I was then prompted to restart the computer, it restarted and for some reason used by backup external FW HD as the startup disc. The internal drive is, and has always been, the
-
Task Quantity in Custom Reports Data Package
Task Quantity in Custom Reports Data Package Using the Custom Reports Data Package how can you report on task quantity? Neither the ServiceTaskFact nor the RequisitionTaskFact tables have quantity as a query item.
-
EL 27 Correction of Implausible Meter Reads
Hi All, I am trying to release impalusible Meter Readings via TCode EL27, by entering a Premise. Two things are happening: 1. Direct Release of MR occurs . (no idividual correction screen opens) 2. Individual Correction screen opens. (no direct relea
-
the fotos i recieve are up side dawn or the position is left or right, is there an add on to fix this or must i do something else?