ABAP code for custom OLAP variables

Hi experts,
We have a custom variant set as customer exit that I have just added to an infopackge for the data selection of 0FISCYEAR infoobject via 7-OLAP Variant. When I click on the magnifying glass under the "details for Type" column, the "Use Variable of OLAP Processor" window appears showing the OLAP Variable and the fiscal year variant. When you hit F6 (check) it should process the variant and return data for the ranges. With this variant we are using there is not data being returned (using the SAP exit variants data is returned).
I have gone through the forums and have seen people citing the function module EXIT_SAPLRRS0_001 as this is the user exit which houses such abap code. I have seen the variant inside this module and the code itself, but why is it in the infopackage when I click on check (F6) no data is returned? I am getting the feeling this abap code is only executed for reporting. In this case I want the infopackage to select certain data from R/3 (via the use of OLAP variable with custom code) during the load to the ODS.

Hi Mark,
If you created the custom fiscal year variant as a customer exit type, I doubt that it'll work.
Variant is an auxiliary time characteristic. You cannot create it. You can only add new char values:
BW Customizing Implementation Guide (SPRO tcode) -> Business Information Warehouse -> General BW Settings -> Maintain fiscal year variant.
Though, maybe I misunderstood your requirements.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Similar Messages

Error in the ABAP Code for Customer Exit Variable

Could you please update me what is the wrong with the below ABAP Code developed for Customer Exit Variable in BW
i created a Variable (ZVWKNO) of Customer Exit,Single Value ,Mandatory and Variable is ready for input
In CMOD i had written the below Code:
When 'ZVWKNO'.
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
But when i execute the query the default value is not populated with Week-1 No in the variable screen
Please update me what went wrong
Thanks

Case ZVWKNO.                "write this with out comments
When '1'.              "write the value that needs to equal with value in varaible ZVWKNO after when in sungle quotes
DATA: WEEK(2) TYPE N,
WEEKNO(2) TYPE N.
IF i_step = 1.
l_st_date = SY-DATUM.
CALL FUNCTION 'DATE_GET_WEEK'
EXPORTING
DATE = l_st_date
IMPORTING
WEEK = l_fn_week.
CHECK sy-subrc = 0.
WEEK = l_fn_week+4(2).
If WEEK 0.                                    "check this Week Minimum is '01' and Maximum '52'
WEEKNO = WEEK - 1.
l_s_range-low = WEEKNO.
l_s_range-sign = k_sign_inclusive.
l_s_range-opt = k_option_equals.
APPEND l_s_range to e_t_range.
ENDIF.
ENDIF.
Prabhudas

Reg: ABAP code for customer exit variable

Hi Team,
I have a requirement to create a report based on an multiprovider 'TEST'.
Based on the input selection of Period; I need to define a Keyfigure X which will be a count of value available for that Period in one cube involved in the MProvider. E.g.: If for period 12, the value = 1 in the cube; then this keyfigure will give the count as 1 in the output of the report.
The second KF Y values are available in the second infocube directly: ibut should be displayed based on the value of the KF 'X' with logic as if X > 0 ; then the values should be read from the second infocube in the report. & if X <= 0; no values should be displayed.
Please help me with the ABAP code to be used in the query level.
Thanks & Regards
Sneha

Hi Sneha,
I would suggest the following
1.Please change the design the cube and include a key figure Zcount that would be incremented for each record.
Now as per the first requirement you need to get the count for a Input Period from First cube
This would be very simple to implement , all you have to do is restrict this KF with the Input characteristic/variable and also the First Infocube.
2.You can also use exception aggreation counter to address this requirement . Even in this case you need to include a dummy key figure in the cube and the exception characteristic would be the period in the Infocube.
But performance would be on downside when compared to the first one.
3.The second requirement is quite simple
Create a formula KF as follows
(KF1 > 0)*KF2 .
KF1 > 0 is a logical operation and it would always return 1 on success and 0 otherwise.
Hope this helps,
Regards,
James Harold.

Abap code for sap exit variables?

Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.

Please tell how u solved ur issue i have the same scenario to be do.

Where do I write the code for customer exit variable?

Hi Gurus,
Can anyone tell me where and the procedure that I have to follow to get to the include ZXRSRU01 where I can write customer exit variable code.
I know its written in ZXRSRU01, but in my system it seems like its not active or does not exist. How do I get to start working in this include for customer exit variables?
Any help is appreciated. Thank you.
Regards
Reddy

hi Reddy,
variable exit use enhancement RSR00001 not RSAP0001. EXIT_SAPLRRS0_001.
try to follow some steps in 'how to' doc related to this, and sample code may useful for you
https://websmp206.sap-ag.de/~sapdownload/011000358700002762582003E/HowToDeriveVariableValue.pdf
https://websmp206.sap-ag.de/~sapdownload/011000358700002765042003E/HowToVerifyVariableInput.pdf
INCLUDE ZXRSRU01                                                   *
DATA: L_S_RANGE TYPE RSR_S_RANGESID.
DATA: LOC_VAR_RANGE LIKE RRRANGEEXIT.
CASE I_VNAM.
WHEN 'CUMMONTH'.
    IF I_STEP = 2.                                  "after the popup
      LOOP AT I_T_VAR_RANGE INTO LOC_VAR_RANGE
              WHERE VNAM = 'MONTH'.
        CLEAR L_S_RANGE.
        L_S_RANGE-LOW      = LOC_VAR_RANGE-LOW(4)."low value, e.g.200001
        L_S_RANGE-LOW+4(2) = '01'.
        L_S_RANGE-HIGH     = LOC_VAR_RANGE-LOW.   "high value = input
        L_S_RANGE-SIGN     = 'I'.
        L_S_RANGE-OPT      = 'BT'.
        APPEND L_S_RANGE TO E_T_RANGE.
        EXIT.
      ENDLOOP.
    ENDIF.
ENDCASE.
hope this helps.

Abap code for Customer Exits

Hi Xperts,
can anybody give me the Correct Coding todisplay the month year in the format "Dec 2006".
WHEN 'ZT_PRVMT-1'.
Data : month_nam(3) type c.
IF i_step = 2.
    CLEAR l_s_range.
    LOOP AT i_t_var_range INTO loc_var_range
                          WHERE vnam EQ 'ZPPRVMTH'.
      l_s_range-low = loc_var_range-low.
      wa_month = loc_var_range-low+4(2).
      wa_year = loc_var_range-low(4).
      wa_month = wa_month - 1.
      If wa_month = 00.
         wa_month = 12.
         wa_year = wa_year - 1.
      Endif.
      CASE wa_month.
        WHEN '01'.
          month_nam = 'JAN'.
        WHEN '02'.
          month_nam = 'FEB'.
        WHEN '03'.
          month_nam = 'MAR'.
        WHEN '04'.
          month_nam = 'APR'.
        WHEN '05'.
          month_nam = 'MAY'.
        WHEN '06'.
          month_nam = 'JUN'.
        WHEN '07'.
          month_nam = 'JUL'.
        WHEN '08'.
          month_nam = 'AUG'.
        WHEN '09'.
          month_nam = 'SEP'.
        WHEN '10'.
          month_nam = 'OCT'.
        WHEN '11'.
          month_nam = 'NOV'.
        WHEN '12'.
          month_nam = 'DEC'.
      ENDCASE.
      CONCATENATE month_nam wa_year INTO L_S_RANGE-LOW SEPARATED BY ' '.
      l_s_range-sign     = 'I'.
      l_s_range-opt      = 'EQ'.
      APPEND l_s_range TO e_t_range.
      EXIT.
    ENDLOOP.
ENDIF.
Please help me.

Hi,
      Try like this
p_date EQ 'X'.                                                                "The date format is like 31 apr, 2007
    CONDENSE temdate NO-GAPS.
    SPLIT date AT ',' INTO daymonth year.
    IF STRLEN( year ) NE '4'.
      error = 'X'.
      WRITE : 'Invalid date format.'.
    ELSE.
      daymonth1 = daymonth.
      CONDENSE daymonth1 NO-GAPS.
      SHIFT daymonth1 LEFT BY 2 PLACES.
      CONDENSE daymonth1 NO-GAPS.
      month = daymonth1.
      CONDENSE month NO-GAPS.
      TRANSLATE month TO UPPER CASE.
      SORT t_month BY monthstx.
      MOVE month to mon.
      READ TABLE t_month WITH KEY monthstx = mon.
      IF sy-subrc <> 0.
        error = 'X'.
        WRITE : 'Invalid date format.' .
      ELSE.
        CONDENSE daymonth NO-GAPS.
        day = daymonth+0(2).
        CONDENSE day NO-GAPS.
        CONCATENATE year t_month-monthnumber day INTO o_date.
Regards

ABAP Code for SAP exit varaibles?

Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.

Hi Kumar,
Try this below mentioned example where default date is current date.
Step1: Create a variable(ex: cur_date) on requrired characteristic with Processing type "Customer Eixt" and check the check box for ready for input(if this variable need in selection screen).
Step 2: Goto T Code : CMOD and provide appropriate Project and choose components and click on display.
Step3: Double click on exit "EXIT_SAPLRRS0_001" you can see include "ZXRSRU01", double click on include.
Step4: Sample code to populate.
WHEN 'CUR_DATE'.
Data : l_p_range_SSS TYPE rrrangesid.
IF I_STEP = 1.
l_p_range_SSS-Low = sy-datum.
l_p_range_SSS-Sign = 'I'.
l_p_range_SSS-Opt = 'EQ'.
APPEND l_p_range_SSS TO e_t_range.
Endif.
The following values are valid for I_STEP:
· I_STEP = 1
Call up takes place directly before variable entry
· I_STEP = 2
Call up takes place directly after variable entry. This step is only started up when the same variable could not be filled at I_STEP=1.
· I_STEP = 3
In this call up, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called up again.
· I_STEP = 0
The enhancement is not called from the variable screen. The call up can come from the authorization check or from the Monitor.
Also, refer this link..
http://help.sap.com/saphelp_bw320/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/content.htm
Cheers,
Allen

ABAP Help for customer exit

Hi All, I need help with ABAP code for customer exit for formula variable. I have ZVKDATE as formula var from customer exit. user enters date in ZVKEYDT(this is selection type var). I have the below code, I debugged it the l_var_range-low get the date but when I append it to e_t_range the table doesn't gets the date. The report shows the ZVKDATE has empty demarcation. kindly help.
data l_var_range like rrrangeexit.
data: l_s_range type RSR_s_RANGESID.
data: w_day(2) type c,
      w_mth(2) type c,
      w_year(4) type c.
define append_range_table.
l_s_range-low = &1.
l_s_range-sign = 'I'.
l_s_range-opt = 'EQ'.
append l_s_range to e_t_range.
end-of-definition.
*Activities performed before selection screen pop-up window
if i_step = 2.
Calculate the current date based on system date
case i_vnam.
    when 'ZVKDATE'.
      read table i_t_var_range into l_var_range
                        with key vnam = 'ZVKEYDAT'.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      w_day = l_var_range-low+6(2).
      w_mth = l_var_range-low+4(2).
      w_year = l_var_range-low(4).
      concatenate w_year w_mth w_day into l_var_range-low.
      append l_s_range to e_t_range.
endcase.
endif.
puneet

Hi,
Check your code again. You are not appending l_var_range but l_s_range. Also I think the concatenate statement should contain l_s_range-low instead of l_var_range-low.
Hope this will help you.
Regards,
Vaibhav

ABAP code Help for Customer Exit variable

Hello All,
Can anyone provide ABAP code for a customer exit variable please?
Requirement:
0CALYEAR(InfoObject) - ZCALCYR (Variable) <b>Calender year with default value actual year</b>.
Proiperties of variable: single value,mandatory,ready for input,can'be changed in query navigation.
i have read some docs on customet exit variables which i got from SDN but i found it's difficult for me to get this as i am not that good in ABAP.
Thanks,
Rakesh.

Hi,
   Just check the below code. You just need to make slight changes I believe. Hope this helps you.
In CMOD..
Sample code
INCLUDE LXRSRF01                                                   *
data: l_s_range type rsr_s_rangesid.
case i_vnam.
when 'ZCALCYR'.
    if i_step = 1.
     l_s_range-low = sy-datum+0(4).
        append l_s_range to e_t_range.
    Endif.
Endcase.

ABAP code for BI 7.0 transformations start routine

Hi all,
I am trying to update data from DSO1 (Source1: transaction data) to Infocube(TARGET)
In the transformations Start routine, I have to read DSO2(Source2: Master data) for some fields.
DSO1 has CUSTOMER as part of key
DSO2 has CUSTOMER (key) and other fields....FIELD1, FILED2, FIELD3
Infocube to be updated with FIELDS1,2 & 3 WHILE READING DSO2.
WHERE DSO1 CUSTOMER matches with DSO2 CUSTOMER.
Also, data NOT TO BE UPLOADED into Infocube if FIELD1 in DSO2= NULL
Please give me the abap code for the above logic.
Appreciate any help in this regard.
Thanks.

This is a doc from this site:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6090a621-c170-2910-c1ab-d9203321ee19
Ravi Thothadri

How To Create ABAP Code For HR Context Sensitive Structural Authorization

Hello,
We have created a HR Custom Program which IS NOT built off the PCH or PNP Logical Database. As a result, we need to manually create ABAP code for HR Context Sensitive Structural Authorization Check in our custom HR program. Via HR Context Sensitive Structural Authorizations, we are restricting access to personnel numbers and the underlying HRP* tables.
Any assistance would be greatly appreciated with the identification of the SAP standard function modules (Ex. RH_STRU_AUTHORITY_CHECK, HR_CHECK_AUTHORITY_INFTY, HR_CHECK_AUTHORITY_INFTY , etc) used in HR Context Sensitive Structural Authorization Check, how they are used to control HR Structural authorization (P_ORGINCON), and some sample code.
Thank you in advance for all your assistance,
Ken Bowers

Hello Ken
You can use the interface methods IF_EX_HRPAD00AUTH_CHECK to get the same structural authorization as you can see in PA20/PA30. You need to use the methods set_org_assignment and check_authorization for this purpose. For more information you can refer to include FP50PE21 from line 237 onwards till 270.
Regards
Ranganath

T code for custom infotype in PA

Hi
T code for custom infotype in PA.
Regards
Sudha

Hi Sudha,
PM01 is the tcode.
Similar questions were already answered in the following threads
ABAP HR : Infotype Enhancement
So please search and then post specific queries.
rgds
gayathri

How to Find Code for SAP Exit variables.....

Gurus:
The SAP Business Content Query "0FIAR_C03_Q0005" uses several BC variables of 'SAP Exit' type for determining "Date" values. I would like to see the code used in these variables. Can anyone please suggest how I can find it?
For examople, the variable on Posting Date is "0P_KEYD2". What is the ABAP code for this? Please give me the Steps..!
Thanks in Advance......PB

Generally SAP doesn't give access to the code behind SAP exit variables, but you can find what the variable is doing using help documentation. Here is some info i saw on SAP help for your variable
0CWD Current workday
0DAT Current calendar day
0P_KEYDT Key date of due date
0P_KEYD2 Key date of posting (from key date of due date)
0P_KEYD3 Key date of clearing (from key date of due date)
0P_KEYD4 Key date of posting (posting date)
0P_KEYD5 Key date of clearing (from key date of posting)

Needs sample ABAP code for field routine

Dear Expert,
There is a field "Pay Scale Group" in my DSO which stores the data in the format
AA1/B1/CCC2/DD2/EEE1, A1/BB2/CC2/DDD3/EE2 etc. These data has to be transferred to
InfoCube where "pay Scale Group" in the InfoCube will store the data like EEE1,EE2 etc.
I need to write a field routine on the transformation between DSO and Cube.
Can any one please help me with the sample ABAP code for this scenario.
Some more examples for better understanding of the requirement:-
Data in DSO(Source)            Data in Cube(Target)
===================            ===================
AA1/B1/CCC2/DD2/EEE1            EEE1
AAA1/BB2/CC1/DDD3/EE2           EE2
A2/BBB2/CC2/DDD3/EEE5           EEE5
AA2/BB1/C1/DDD3/EE3             EE3
A3/B1/CC2/DDD1/EE4              EE4
Many thanks in advance.
Regards,
Prakash
Please do not dump your code requirements in SDN
Edited by: Pravender on May 18, 2011 11:37 AM

Hi,
You can use the following code :
Suppose the technical name of the field coming from DSO is ZPAY_SGRP.
And also for example let me take one record, that is ZPAY_SGRP = AA1/B1/CCC2/DD2/EEE1 .
My assumption is that there will always be 4 '/'.
In the field routine write the below code
data: V1(5) type c,
          V2(5) type c,
         V3(5) type c,
          V4(5) type c,
         V5(5) type c.
data : VAR1 TYPE /BIC/OIZPAY_SGRP.
split VAR 1 at '/' into V1 V2 V3 V4 V5.
result = V5.
V5 will be having the characters after the last '/' .That is V5 = EEE1.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh
Edited by: Ashutosh Singh on May 17, 2011 3:53 PM
Edited by: Ashutosh Singh on May 17, 2011 4:17 PM

Transaction code for Custom report

Hi,
How to create transaction code for Custom report ?
the custom report is a drilldown report of COPA, which can seen in tcode FDI3.
then how to add this new transaction to the menu path Easy assess->FI->AR->Information system->Reports->customers:items.
Thanks,
Swetha

Hi Swetha,
There is a special way to assign tcodes to such reports. Normally you create the report via report painter/writer. These reports are part of library and report group.
Create the tcode in SE93. Then at the bottom of the screen you would find option to specify report group, report name, variant to lauch with. Don't have system to specify the exact way of specifying, if you need I can provide on monday. You can take some existing COPA standard report and check from SE93.
--Ram

ABAP code for custom OLAP variables

Similar Messages

Maybe you are looking for