ABAP Code for Extractor Enhancement

Hi Gurus,
I enhanced the datasource 0CO-OM_CCA_9. My requirement is to pull the data from COKP (line item table) to COEP (header table). The extract structure will then pull the data from COEP. I wrote an ABAP code but its not working for me. Can you please suggest me some options.
Thanks,
Naineesh

Hi,
See SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/6e/fe6e420f00d242e10000000a1550b0/content.htm
See the simple example code, so follow the same.Take ABAPer help.
CASE i_datasource.
Data: l_s_data1 LIKE mc13vd0itm,
        l_tabix   LIKE sy-tabix,
WHEN '2LIS_13_VDITM'.
    LOOP AT c_t_data INTO l_s_data1.
      l_tabix = sy-tabix.
      SELECT SINGLE auart INTO l_s_data1-zzprdtyp FROM vbak
             WHERE vbeln = l_s_data1-aubel.
      IF sy-subrc = 0.
        MODIFY c_t_data FROM l_s_data1 INDEX l_tabix.
      ENDIF.
    ENDLOOP.
ENDCASE.
See article on Step by Step Guide to Enhance a Data Source:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00c1f726-1dc2-2c10-f891-ddfbffdb1a46?quicklink=index&overridelayout=true
Thanks
Reddy

Similar Messages

How to write the ABAP code for Datasource Enhancment

Hi Team,
Can you please help me how to write the code for the enhancement i have made to the standard datasource
i have added the fields ZZPayer and ZZPayer_access.
I just wanted to know how to write the ABAP code to populate the data for these fields.
Regards,
Pradeep P.

Hi
From a performance point of view would like to suggest a few changes :
WHEN '<DS name>'.
select zzfields from <table> into itab
for all entries in c_t_data where <condition>.
If sy_subrc = 0.
loop at c_t_data assiging f_c_t_data.
read itab into wa_itab where key = f_c_t_data-key.
f_c_t_data-zzfield = wa-itab-zzfield.
endloop.
refresh itab.
regards,
aparna
endif.

Need ABAP code for Datasource Enhancement

Hi All,
I need no Enhance the WBS Element(PS_PSP_PNR) to2 LIS_02_ITM Datasource
the table EKKN Having WBS element
From EKKN Table We have to take the filed Append to the2LIS_02_ITM datasource
Please any one give me ABAP code which is write in CMOD
Thanks........
Regards!
Malli

Hi,
See SAP Help
http://help.sap.com/saphelp_nw04s/helpdata/en/6e/fe6e420f00d242e10000000a1550b0/content.htm
See the simple example code, so follow the same.Take ABAPer help, don't use select and end select.
CASE i_datasource.
Data: l_s_data1 LIKE mc13vd0itm,
        l_tabix   LIKE sy-tabix,
WHEN '2LIS_13_VDITM'.
    LOOP AT c_t_data INTO l_s_data1.
      l_tabix = sy-tabix.
      SELECT SINGLE auart INTO l_s_data1-zzprdtyp FROM vbak
             WHERE vbeln = l_s_data1-aubel.
      IF sy-subrc = 0.
        MODIFY c_t_data FROM l_s_data1 INDEX l_tabix.
      ENDIF.
    ENDLOOP.
ENDCASE.
Data: l_s_data18 LIKE mc12vc0itm ,
      l_tabix   LIKE sy-tabix.
WHEN '2LIS_12_VCITM' .
    LOOP AT c_t_data INTO l_s_data18.
      l_tabix = sy-tabix.
      SELECT SINGLE ernam FROM ekko
       INTO (l_s_data18-ernam)
       WHERE ebeln = l_s_data18-vgbel .
      IF sy-subrc = 0.
        MODIFY c_t_data FROM l_s_data18 INDEX l_tabix.
      ENDIF.
    ENDLOOP.
See article on Step by Step Guide to Enhance a Data Source:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/00c1f726-1dc2-2c10-f891-ddfbffdb1a46?quicklink=index&overridelayout=true
Thanks
Reddy

ABAP Code for SAP exit varaibles?

Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.

Hi Kumar,
Try this below mentioned example where default date is current date.
Step1: Create a variable(ex: cur_date) on requrired characteristic with Processing type "Customer Eixt" and check the check box for ready for input(if this variable need in selection screen).
Step 2: Goto T Code : CMOD and provide appropriate Project and choose components and click on display.
Step3: Double click on exit "EXIT_SAPLRRS0_001" you can see include "ZXRSRU01", double click on include.
Step4: Sample code to populate.
WHEN 'CUR_DATE'.
Data : l_p_range_SSS TYPE rrrangesid.
IF I_STEP = 1.
l_p_range_SSS-Low = sy-datum.
l_p_range_SSS-Sign = 'I'.
l_p_range_SSS-Opt = 'EQ'.
APPEND l_p_range_SSS TO e_t_range.
Endif.
The following values are valid for I_STEP:
· I_STEP = 1
Call up takes place directly before variable entry
· I_STEP = 2
Call up takes place directly after variable entry. This step is only started up when the same variable could not be filled at I_STEP=1.
· I_STEP = 3
In this call up, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called up again.
· I_STEP = 0
The enhancement is not called from the variable screen. The call up can come from the authorization check or from the Monitor.
Also, refer this link..
http://help.sap.com/saphelp_bw320/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/content.htm
Cheers,
Allen

Needs sample ABAP code for field routine

Dear Expert,
There is a field "Pay Scale Group" in my DSO which stores the data in the format
AA1/B1/CCC2/DD2/EEE1, A1/BB2/CC2/DDD3/EE2 etc. These data has to be transferred to
InfoCube where "pay Scale Group" in the InfoCube will store the data like EEE1,EE2 etc.
I need to write a field routine on the transformation between DSO and Cube.
Can any one please help me with the sample ABAP code for this scenario.
Some more examples for better understanding of the requirement:-
Data in DSO(Source)            Data in Cube(Target)
===================            ===================
AA1/B1/CCC2/DD2/EEE1            EEE1
AAA1/BB2/CC1/DDD3/EE2           EE2
A2/BBB2/CC2/DDD3/EEE5           EEE5
AA2/BB1/C1/DDD3/EE3             EE3
A3/B1/CC2/DDD1/EE4              EE4
Many thanks in advance.
Regards,
Prakash
Please do not dump your code requirements in SDN
Edited by: Pravender on May 18, 2011 11:37 AM

Hi,
You can use the following code :
Suppose the technical name of the field coming from DSO is ZPAY_SGRP.
And also for example let me take one record, that is ZPAY_SGRP = AA1/B1/CCC2/DD2/EEE1 .
My assumption is that there will always be 4 '/'.
In the field routine write the below code
data: V1(5) type c,
          V2(5) type c,
         V3(5) type c,
          V4(5) type c,
         V5(5) type c.
data : VAR1 TYPE /BIC/OIZPAY_SGRP.
split VAR 1 at '/' into V1 V2 V3 V4 V5.
result = V5.
V5 will be having the characters after the last '/' .That is V5 = EEE1.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh
Edited by: Ashutosh Singh on May 17, 2011 3:53 PM
Edited by: Ashutosh Singh on May 17, 2011 4:17 PM

ABAP code for BI 7.0 transformations start routine

Hi all,
I am trying to update data from DSO1 (Source1: transaction data) to Infocube(TARGET)
In the transformations Start routine, I have to read DSO2(Source2: Master data) for some fields.
DSO1 has CUSTOMER as part of key
DSO2 has CUSTOMER (key) and other fields....FIELD1, FILED2, FIELD3
Infocube to be updated with FIELDS1,2 & 3 WHILE READING DSO2.
WHERE DSO1 CUSTOMER matches with DSO2 CUSTOMER.
Also, data NOT TO BE UPLOADED into Infocube if FIELD1 in DSO2= NULL
Please give me the abap code for the above logic.
Appreciate any help in this regard.
Thanks.

This is a doc from this site:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6090a621-c170-2910-c1ab-d9203321ee19
Ravi Thothadri

How To Create ABAP Code For HR Context Sensitive Structural Authorization

Hello,
We have created a HR Custom Program which IS NOT built off the PCH or PNP Logical Database. As a result, we need to manually create ABAP code for HR Context Sensitive Structural Authorization Check in our custom HR program. Via HR Context Sensitive Structural Authorizations, we are restricting access to personnel numbers and the underlying HRP* tables.
Any assistance would be greatly appreciated with the identification of the SAP standard function modules (Ex. RH_STRU_AUTHORITY_CHECK, HR_CHECK_AUTHORITY_INFTY, HR_CHECK_AUTHORITY_INFTY , etc) used in HR Context Sensitive Structural Authorization Check, how they are used to control HR Structural authorization (P_ORGINCON), and some sample code.
Thank you in advance for all your assistance,
Ken Bowers

Hello Ken
You can use the interface methods IF_EX_HRPAD00AUTH_CHECK to get the same structural authorization as you can see in PA20/PA30. You need to use the methods set_org_assignment and check_authorization for this purpose. For more information you can refer to include FP50PE21 from line 237 onwards till 270.
Regards
Ranganath

Need ABAP code for the below Services requirement

Hi,
We have a requirement to show all the services for a particular Purchase order number.For this I built a view on 2 tables ESLL and EKPO.Now based on the below logic I need to bring the services for the Purchase order..
1.Enter PO number,item no. and Doc category in EKPO and find the Pack no.
2.Now take the Pack no. of EKPO and give in ESLL and find the Sub pack no.
3.Now take this Subpack no. and Give this sub pack as Pack no. in ESLL
4.This will be the Service entry record for that PO number.
Can any one Please suggest me to how to write the ABAP code for the above logic.
Thanks & Regards,
Dinakar

Hi Dinaker,
Did you find any solution for this issue. I too have a similar requirement of pulling all the service orders for a specific Purchase Order in the BW report.
Thanks,
SAPBWI

GRR2- 4FM-RepPaint(put ABAP code for convert data in field)

Hi,
If somebody know how possible add ABAP code for convert data in some column-field of report (by RepWriter,UserExit,BADI)?
Thanks a lot.

Elaborate your question. Not clear ??

ABAP code for wrting a file to application server

<Moderator Message: We are not here to do your job for you>
Hi All,
i have a requirement to get the data from some other ABAP program and this data has to be written in one of the files present in application server.
please provide me the exact ABAP code for this...
Edited by: Siegfried Szameitat on Dec 17, 2008 10:40 AM

this has to be done using a process chain

ABAP Code for BI objects

Hi Friends,
I have created BI objects like infocubes, infoobjects, DTP, Datasource to transfer data from a flat file to BI system using SAP GUI... All data from flat file are transfered to BI successfully... i dont have any knowledge in ABAP... So i need to see the ABAP code for the BI objects i created above in my project... how can i see the coding for that?
thanks in advance
sasi

Hi Sasi,
All the objects which you create in BI will be stored in some standad tables,it only fetch details accordingly from those tables.For MasterData you can find the option as Display Routines in Extras.If you want to get more infomation about the STD Table and the Program involed in BI objects,just enter in (/h) mode.
Regards,
Prem

Abap code for sap exit variables?

Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.

Please tell how u solved ur issue i have the same scenario to be do.

ABAP code for Hierarchy Loading from Flat File

Hi,
Can anyone give me some idea / ABAP code for generating parent - child relationships (NODEIDS) from a flat file and load into BW.
Best regards
Any insight into this development is highly appreciated

Hi,
also have a look at this how to to get informations about the file structure:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/0403a990-0201-0010-38b3-e1fc442848cb
/manfred

ABAP code for Date Range

Hi All,
I have requirement to write code for date range.
Characterstic = Run-Out Date, it was created reference to 0Date.
Requirement is data should load depends on Run-Out Date 7 days old and 14 days future.
Logic is -7 days old >= Run_out date <= 14 days future.
please let me know how I need to proceed with ABAP code for this requirement.
Thanks.
Please do not ask for ABAP code here. Its not a training forum
Edited by: Pravender on Aug 18, 2011 1:46 AM

>
Sree vignesh wrote:
> Hi,
> In the select option we have a field month range as
> SELECT-OPTION : FROM 01.2007       TO 01.2009 " Let say Ur Selection option is SO_MONTH
> but now i need to add the DMBTR field considering the month range in the SELECT OPTION i.e., only FROM 01.2007 TO 01.2009 i mean without 2006 data.
>
> LOOP AT LT_DATA WHERE month in SO_MONTH. " Here add a Where condition
>     ls_output-matnr = lt_data-belnr.
>     ls_output-werks = lt_data-bukrs.
>     ls_output-lgort = lt_data-dmbtr.
>
>     COLLECT ls_output INTO lt_output .
>
>   ENDLOOP.
>
> please help with code .
>
> thanks in advance.
Regards,
Suneel G

Sample ABAP code for userexits, and calling bapi's

Hi,
Can someone please send me sample ABAP code
1) to do extractor enhancement using user exit.
2) ABAP program to call BAPI to read live cache order series data in SNP and write to Idocs through some ports.
3) ABAP routine to generate file name (based on date/country)in the infopackage to upload flatfiles.
Thank you very much in advance and appreciate any help.
Regards
Prasad

hai ,
check this code...
*& Tables
tables : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
    where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
    select single * from tadir
       where pgmid    = 'R3TR'
         and object   = 'PROG'
         and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
      select single * from trdir
         where name = tstc-pgmna.
      if trdir-subc eq 'F'.
        select single * from tfdir
          where pname = tstc-pgmna.
        select single * from enlfdir
          where funcname = tfdir-funcname.
        select single * from tadir
          where pgmid    = 'R3TR'
            and object   = 'FUGR'
            and obj_name = enlfdir-area.
        move : tadir-devclass to v_devclass.
      endif.
    endif.
Find SAP Modifactions
    select * from tadir
      into table jtab
      where pgmid    = 'R3TR'
        and object   = 'SMOD'
        and devclass = v_devclass.
    select single * from tstct
      where sprsl eq sy-langu
        and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
      write:/(95) sy-uline.
      format color col_heading intensified on.
      write:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      write:/(95) sy-uline.
      loop at jtab.
        select single * from modsapt
        where sprsl = sy-langu and
        name = jtab-obj_name.
        format color col_normal intensified off.
        write:/1 sy-vline,
        2 jtab-obj_name hotspot on,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      endloop.
      write:/(95) sy-uline.
      describe table jtab.
      skip.
      format color col_total intensified on.
      write:/ 'No of Exits:' , sy-tfill.
    else.
      format color col_negative intensified on.
      write:/(95) 'No User Exit exists'.
    endif.
else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.

ABAP Code for Extractor Enhancement

Similar Messages

Maybe you are looking for