Abap code in start routine
hi,
i have a code in this way in update routine of that info object
instead of writng that code in update routine i want to write in start routine
can any one tell me what r the changes i have to made
please suggest me
i will assigfn points
CASE COMM_STRUCTURE-crm_ctstat.
Contact Achieved
WHEN '0'.
Finished faultless
RESULT = '20'.
RETURNCODE = 0.
Contact Not Possible (Missing Communication Data)
WHEN '1'.
Finished faulty
RESULT = '10'.
RETURNCODE = 0.
Contact Not Possible (Incorrect Communication Data)
WHEN '2'.
Finished faulty
RESULT = '10'.
RETURNCODE = 0.
Contact Not Permitted (Max. Usage BP List)
WHEN '3'.
Finished faulty
RESULT = '10'.
RETURNCODE = 0.
Contact Not Permitted (Block Indicator for BP)
WHEN '4'.
Finished faulty
RESULT = '10'.
RETURNCODE = 0.
Contact Not Possible (Technical Problems)
WHEN '5'.
Finished faulty
RESULT = '10'.
RETURNCODE = 0.
ENDCASE.
Hi,
loop at datapackage.
CASE datapackage-crm_ctstat.
Contact Achieved
WHEN '0'.
Finished faultless
RESULT = '20'.
RETURNCODE = 0.
Contact Not Possible (Missing Communication Data)
WHEN '1'.
Finished faulty
RESULT = '10'.
RETURNCODE = 0.
Contact Not Possible (Incorrect Communication Data)
WHEN '2'.
Finished faulty
RESULT = '10'.
RETURNCODE = 0.
Contact Not Permitted (Max. Usage BP List)
WHEN '3'.
Finished faulty
RESULT = '10'.
RETURNCODE = 0.
Contact Not Permitted (Block Indicator for BP)
WHEN '4'.
Finished faulty
RESULT = '10'.
RETURNCODE = 0.
Contact Not Possible (Technical Problems)
WHEN '5'.
Finished faulty
RESULT = '10'.
RETURNCODE = 0.
ENDCASE.
endloop.
Similar Messages
-
ABAP Code in Start Routine for restricing the data records from ODS1 - ODS2
Hi
I need small ABAP Code in Start Routine Of Update rules Of ODS . Im in BW 3.5 .
I have records like below in first layer ODS and i want to restrict some records while going to second layer ODS ..
ODS1 :-
DocNO EventType Date
123 001 08/08/2008
123 003 08/08/2008
123 011 09/08/2008
I want one record in ODS2 for this document number whose EventType = 001 only and date of third record ... like below
Doc NO EventType From Date Todate
123 001 08/08/2008 09/08/2008
So how can i get like this record in the ODS2 which will get data from ODS1 . So i need to write the code in the start routine of the ODS2 .
So please give the me the code for start routine ....
Regards
SureshIts difficult in BW 3.5 to include this logic in START_ROUTINE as you cannot add the extra to_date field to the DATA_PACKAGE table.
You need to create a new global internal table with the same structure of DATA_PACKAGE with additional field to_date. then use the logic to fill in the global internal table
define a internal table new_data_package with the required structure like (docno, eventtype, fromdate todate)
data: l_w_datapkg_001 type data_package,
data: l_w_newdatapkg type new_data_package,
data: l_w_datapkg_011 type data_package
LOOP AT DATA_PACKAGE INTO l_w_datapkg_001 WHERE event_type = '001'.
l_w_newdatapkg-docno = l_w_datapkg_001-docno.
l_w_newdatapkg-event_type = l_w_datapkg_001-event_type.
l_w_newdatapkg-fromdate = l_w_datapkg_001-date.
MOVE CORRESPONDING FIELDS OF l_w_datapkg_001 INTO l_w_newdatapkg.
READ TABLE data_package INTO l_w_datapkg_011
WITH KEY docno = l_w_datapkg_001-docno
event_type = '011'.
l_w_newdatapkg-to_date = l_w_datapkg_011-date.
APPEND l_w_newdatapkg TO new_data_package
ENDLOOP.
Now the new datapackage contains the ODS2 data that u needed -
Execute ABAP code in Start Routine only once
I have ABAP code in a start routine that I only want to execute once. Is there a way to tell this is first execution of the start routine?
Also can I find out these value in the start routine ABAP:
1. How many data packets there are?
2. What data packet I am processing?
Regards,
Mike...Hi,
I've just setup a little test:
TRules, Start Routine Global Decl:
DATA: GVI TYPE I, GVN(5) TYPE N.
Start Routine:
IF GVI IS INITIAL.
GVI = 1.
ELSE.
ADD 1 TO GVI.
ENDIF.
MOVE GVI TO GVN.
This is basically counting the times the start routine is executed and populating the var GVN; I am posting GVN in a char ZTESTGV in the target cube. I am posting as well the datapakID in my cube.
I have loaded two requests (each 4 packets)
the first one first to PSA and then from the PSA to the target: this is Serially using one single process. Here's the result in the cube:
Request________________________________DATAPAKID_____ZTESTGV
REQU_8B5ASGQNYYNIV1OJN68HFH1SR____________1____________1
REQU_8B5ASGQNYYNIV1OJN68HFH1SR____________2____________2
REQU_8B5ASGQNYYNIV1OJN68HFH1SR____________3____________3
REQU_8B5ASGQNYYNIV1OJN68HFH1SR____________4____________4
In this case the global variable is persistent accross packets.
the second request is loaded in paralell: this is, multiple processes are executed at the time. Here's the result in the cube:
Request________________________________DATAPAKID_____ZTESTGV
REQU_14QVH21BSVH44FAJW94BD7N2H____________1____________1
REQU_14QVH21BSVH44FAJW94BD7N2H____________2____________1
REQU_14QVH21BSVH44FAJW94BD7N2H____________3____________1
REQU_14QVH21BSVH44FAJW94BD7N2H____________4____________1
In this case the global variable is always1 !!
This is logic since several a process cannot access the internal memory used by another one...
Conclusion; the global variable will work only if the load is serial...
hope this helps...
Olivier. -
ABAP code in start routine (delete no in)
In my start routine, I would like to delete some data package whose employee id is not in the selection list.
but there are some ABAP grammer error in the where condition. Can somebody help this? I tried to read the document for 'WHERE - IN seltab', but still I could not give the right code.
<p>
employeeid_itab type table of string.
select /bic/zpe_employeeid into table employeeid_itab from /bic/pzpe_employeeid.
DELETE SOURCE_PACKAGE where ZEMP_employee_ID NOT IN employeeid_itab.
It seems that internal table employeeid_itab could not be directly used after the IN keyword.
how can I do this?
Edited by: Ben Li on Feb 22, 2008 2:09 PMHi Oscar,
Actually I had tried this before, using the code like the following,
<p>
Types: EmployeeID(7) type c.
<p>
data: sel_itab type range of EmployeeID.
<p>
select /bic/zpe_employeeid into table sel_itab from /bic/pzpe_employeeid.
<p>
delete SOURCE_PACKAGE where zemp_employee_id not in sel_itab.
<p>
The grammer check is OK, but when I debug it, I found that there are records in sel_itab, but all the records just have one charactor, actually, my employeeID have 7 charactors in database. So it does not work, I think I miss something in define of the range table. Can you please figure out? Thanks a lot. -
Convert ABAP code in start routine/update rule to transform. start routine
Dear BW ABAPers,
I have created a custom purchasing info cube (YCP_PURC1) based on 0CP_PURC1 standard cube. I would like to convert this new data flow to BI7 (from 3.x), and convert the standard update rule to transformation. I would need to rewrite the below start routine from the standard update rule to a start routine ABAP code in the newly created transformation / start routine. My ABAP knowledge is limited. Will you please help?
*this is the start routine from the update rule. As a side note, the data source is 2LIS_02_SCL.
LOOP AT SOURCE_PACKAGE.
IF ( SOURCE_PACKAGE-cppvlc EQ 0
AND SOURCE_PACKAGE-cppvoc EQ 0
AND SOURCE_PACKAGE-cpquaou EQ 0 ).
DELETE SOURCE_PACKAGE.
CONTINUE.
ENDIF.
no_scl is initial ( e.g. for good receipts, billing)
value has to be set depending on storno
IF SOURCE_PACKAGE-no_scl IS INITIAL.
IF SOURCE_PACKAGE-storno = 'X'.
SOURCE_PACKAGE-no_scl = -1.
ELSE.
SOURCE_PACKAGE-no_scl = 1.
ENDIF.
MODIFY SOURCE_PACKAGE.
ENDIF.
ENDLOOP.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
Many thanks and look forward to your kind feedback.
Kind regards,
CsabaDear All, Durgesh,
thanks to you all for your valuable input. Mainly the ABAP part was more interesting for me.
Durgesh, thanks for your input, it was useful. I just had to change the info objects to data source fields and add the lines before the loop:
DATA: I_PACKAGE TYPE TYT_SC_1.
FIELD-SYMBOLS <i_package> TYPE tys_sc_1.
I_PACKAGE[] = SOURCE_PACKAGE[].
LOOP AT SOURCE_PACKAGE assigning <i_package>.
IF ( <i_package>-BWGEO EQ 0
AND <i_package>-BWGEOO EQ 0
AND <i_package>-BWMNG EQ 0 ).
DELETE SOURCE_PACKAGE index sy-tabix.
CONTINUE.
ENDIF.
no_scl is initial ( e.g. for good receipts, billing)
value has to be set depending on storno
IF <i_package>-NOSCL IS INITIAL.
IF <i_package>-ROCANCEL = 'X'.
<i_package>-NOSCL = -1.
ELSE.
<i_package>-NOSCL = 1.
ENDIF.
ENDIF.
ENDLOOP.
Points have been assigned accordingly.
Thanks,
Csaba -
ABAP Code in Start Routine to fill a field
Hello,
with the following code in the start routine in BW3.5 I am trying to fill Intercompany-Indicator based on Distribution Channel. The main code is marked bold.
Distribution Channel = DISTR_CHAN
InterCompany-Indicator = G_CWWR14
Pls help. Thanks.
SD
Intercompany Indicator
IF NOT wa_daten-customer IS INITIAL.
SELECT SINGLE /b05/s_rbkunde FROM /b05/mrbcust INTO l_rbcust
WHERE /b05/s_rbcust = wa_daten-customer
AND objvers = 'A'
AND datefrom <= l_date
AND dateto >= l_date.
IF sy-subrc EQ 0.
SELECT SINGLE g_cwwr14 FROM /b05/mrbkdbkrs INTO l_ii
WHERE comp_code = wa_daten-comp_code
AND /b05/s_rbkdbkrs = l_rbcust
AND objvers = 'A'
AND datefrom <= l_date
AND dateto >= l_date.
IF sy-subrc = 0.
wa_daten-g_cwwr14 = l_ii.
ELSE.
CLEAR wa_daten-g_cwwr14.
ENDIF.
ELSE.
CLEAR wa_daten-g_cwwr14.
ENDIF.
ELSE.
IF wa_daten-G_CWWR14 = ' '.
CASE wa_daten-DISTR_CHAN.
WHEN 'Y4'.
wa_daten-G_CWWR14 = '4'.
WHEN 'Y5'.
wa_daten-G_CWWR14 = '2'.
WHEN OTHERS.
wa_daten-G_CWWR14 = '0'.
ENDCASE.
ENDIF.
ENDIF. " NOT wa_daten-customer IS INITIAL
MODIFY DATA_PACKAGE FROM wa_daten.
ENDLOOP.Hi Venkat,
Two things -One is the performance and the other ... there is no Append within the loop.
Try moving the select statement ousdie the loop to improve performance and move the modify statement into the loop ... change modify to append. Code below.
Let me know if you need more help.
Best regards,
Kazmi
data: it_data type standard table of data_package_structure
with header line
with non-unique default key initial size 0.
types: begin of billing_item_type,
BILL_NUM like /BIC/AZSD_O0700-BILL_NUM,
DOC_NUMBER like /BIC/AZSD_O0700-DOC_NUMBER,
PLANT like /BIC/AZSD_O0700-PLANT,
end of billing_item_type.
refresh it_data.
clear it_data.
it_data] = DATA_PACKAGE[.
refresh DATA_PACKAGE.
clear DATA_PACKAGE.
loop at it_data.
select DOC_NUMBER PLANT into (it_data-DOC_NUMBER, it_data-PLANT)
from /BIC/AZSD_O0700
where BILL_NUM = it_data-BILL_NUM
and FISCVARNT = it_data-fiscvarnt.
endselect.
if sy-subrc = 0.
move-corresponding it_data to DATA_PACKAGE.
Append DATA_PACKAGE.
endif.
endloop. -
Need help in ABAP coding in start routine
Hi,
I have a requriement like
-To take the value of month which is an attribute of category(info Object) for which category value is 1. I need to apply the month obtained as the filter to another info object. I have opted to write this ABAP code in start routine. Can anyone guide me on this code.
Thanks in advance.do you not have an abap-er at your disposal? i don't imagine this to be quick & dirty that can be written without access to your system! some analysis work may also be required before the actual coding can be done...so I wouldn't post the entire functional spec (business requirement) here hoping for a solution; that would be too weird.
Regards. -
Urgent : Doubt in writing a code in start routine
Hi all ,
I am BI 7.0 system , I have doubt in writing a code in start routine .
1) i have to extract the data first from a custom table based on one condition and then placing it into internal table .
2) Now i have to loop at source_package for a particular region field say "ASIA". with this result i have to check for the correponding entries in custoom table .
if condition is not true (i.e ) with entries or not matching then delete that particular record from source_package.
i have written a small logic for this . but this is producing any ouput , Please check it and also let me know for modifications .
thanks in advance.
select * from zcsp
into corresponding fields of TABLE itab_T
where
ZBUSINESSUNIT = 'BC'.
loop at SOURCE_PACKAGE into ls_SOURCE_PACKAGE where /BIC/DPREGION = 'XE'.
loop at itab_t into itab_w where zcategory =
ls_source_package-/BIC/DPMAT/BIC/DPCAT.
if sy-subrc ne 0.
delete SOURCE_PACKAGE.
endif.
endloop.
endloop.You're deleting the entire input package. You only want to delete the one row.
DATA: g_tabix TYPE sy-tabix.
SELECT * FROM zscp
INTO CORRESPONDING FIELDS OF TABLE itab_t
WHERE zbusinessunit = 'BC'.
SORT itab_t BY zcategory.
LOOP AT source_package INTO ls_source_package WHERE /bic/dpregion = 'XE'.
g_tabix = sy-tabix.
READ TABLE itab_t WITH KEY zcategory = ls_source_package-/bic/dpmat/bic/dpcat TRANSPORTING NO FIELDS BINARY SEARCH.
IF sy-subrc NE 0.
DELETE source_package INDEX g_tabix.
ENDIF.
ENDLOOP. -
Needs sample ABAP code for field routine
Dear Expert,
There is a field "Pay Scale Group" in my DSO which stores the data in the format
AA1/B1/CCC2/DD2/EEE1, A1/BB2/CC2/DDD3/EE2 etc. These data has to be transferred to
InfoCube where "pay Scale Group" in the InfoCube will store the data like EEE1,EE2 etc.
I need to write a field routine on the transformation between DSO and Cube.
Can any one please help me with the sample ABAP code for this scenario.
Some more examples for better understanding of the requirement:-
Data in DSO(Source) Data in Cube(Target)
=================== ===================
AA1/B1/CCC2/DD2/EEE1 EEE1
AAA1/BB2/CC1/DDD3/EE2 EE2
A2/BBB2/CC2/DDD3/EEE5 EEE5
AA2/BB1/C1/DDD3/EE3 EE3
A3/B1/CC2/DDD1/EE4 EE4
Many thanks in advance.
Regards,
Prakash
Please do not dump your code requirements in SDN
Edited by: Pravender on May 18, 2011 11:37 AMHi,
You can use the following code :
Suppose the technical name of the field coming from DSO is ZPAY_SGRP.
And also for example let me take one record, that is ZPAY_SGRP = AA1/B1/CCC2/DD2/EEE1 .
My assumption is that there will always be 4 '/'.
In the field routine write the below code
data: V1(5) type c,
V2(5) type c,
V3(5) type c,
V4(5) type c,
V5(5) type c.
data : VAR1 TYPE /BIC/OIZPAY_SGRP.
split VAR 1 at '/' into V1 V2 V3 V4 V5.
result = V5.
V5 will be having the characters after the last '/' .That is V5 = EEE1.
Hope the above reply was helpful.
Kind Regards,
Ashutosh Singh
Edited by: Ashutosh Singh on May 17, 2011 3:53 PM
Edited by: Ashutosh Singh on May 17, 2011 4:17 PM -
Hello everybody,
I have written a code to delete some records in start routine, we are using BI 7.0.
here is the code,
TYPES: BEGIN OF tys_SC_3,
TCTUSERNM TYPE /BI0/OITCTUSERNM,
END OF tys_SC_3.
DATA zz_s_SC_3 type sorted table of tys_SC_3 with unique key TCTUSERNM.
DATA zz_s_SC_4 like line of zz_s_SC_3.
select TCTUSERNM from /B12/ARIAO0100 into table zz_s_SC_3
where TCTIOBJNM = '0TCAIPROV' and TCTLOW = '/MRG/RIMAC_01'.
DELETE SOURCE_PACKAGE where TCTUSERNM NOT IN zz_s_SC_3.
When I am running this code,I am getting an error
"E:"ZZ_S_SC_3" does not have the structure of a selection table."
can anybody out there help me out,
Thank you,
KarthikHi,
you need to define zz_s_SC_3 as:
data: zz_s_SC_3 type standard table of rsrange.
do the select as:
select TCTUSERNM as low from /B12/ARIAO0100 into table zz_s_SC_3
modify zz_s_sc_3 to set the fields sign and option to 'I' and 'EQ' for all records then it will work.
Siggi -
Hi,
I want to write a transfer routine, Can any one give me the ABAP Code...
Here is what I want to do:
1. Read by document Number at the Header level (identified by item = "#")
2. Read the Status of the Header
3. If the Status = deleted
4. Read all the line items related to the Header
5. Assign the Status of the line item = Status of the Header
Thanks
Edited by: tanu d on Aug 20, 2010 11:32 AMHi,
See the simple code.
IF SOURCE_FIELDS-N_WBSEOM = ' '.
RESULT = 'N'
ELSE.
RESULT = SOURCE_FIELDS-N_WBSEOM.
ENDIF.
OR
IF SOURCE_FIELDS-N_WBSEOM IS INITIAL.
RESULT = 'N'
ELSE.
RESULT = SOURCE_FIELDS-N_WBSEOM.
ENDIF.
Thanks
Reddy
Edited by: Surendra Reddy on Nov 25, 2009 5:38 AM -
I have two ODS's - ODS1 and ODS2 . ODS1 feeds data to ODS2 using an
uppdate rule .ODS1 data is as follows
Billno Itemno cond keyfig
10 1 a 1
10 1 b 3
10 1 c 5
20 1 d 7
20 1 e 8
20 1 f 1
20 1 g 1
30 2 h 4
30 3 h 2
I need to populate a field in ODS2 (say sum) by summing
all values of keyfig for each bill no . for example in the
above case ods2-sum should be filled with values 9 ,16 and 6
for billno's 10,20& 30 respectively .
can someone pls help me with required code.
thanksHi,
In the start routine write the selection:
DATA: begin of it_int occurs 0,
billno type ods2-billno,
sum type ods2-sum,
end of it_int.
select billno sum( keyfig ) from ods1
into table it_int groupby billno orderby billno.
In the update routine for ods2-sum read the it_init:
read table it_int with key
billno = COMM_STRUCTURE-billno.
if sy-subrc = 0.
result = it_int-sum.
endif.
Regards,
Prema -
ABAP Help at start routine of Update rule
Good After Noon All,
My requirement is that cube ZAPO_C24M theres an UPDR flowing from 8ZAPO_C24M back to itself so to speak.The request is to change the data in the cube from Fiscal Year Variant Z3 to Z4.
But in start routine i have to take the existing record and reverse all of the key figures, and also change the RECORDMODE of the record to indicate it is a reversal record. This for specific Country KR and for these country the Fiscal variant is Z3. Again in the start routine, create a new record identical to the existing record that has Fiscal Year Variant Z4 instead of Z3.
So the idea is wed load from the cube and send back to the cube one record that reverses out the existing data, and another record that contains the same data but with Fiscal Variant Z4 instead of Z3.
Please Help me.
Points will be awarded for the right answerHi Vaishali,
In the start routine copy the DATA_PACKAGE to a local table.
Select the records where the specific country is KR.
Delete all other records.
Then read the records in loop, Keep one record same and just change the fiscal year variant.
And for the same multiply all the key figures by -1.
Transfer the content of the local table back to DATA_PACKAGE.
maintain one to one mapping in the update rule.
I am sure it will update, but you need to be sure that if you change Fiscal year variant then probably your fiscal period value should change. In that case you have to update it accordingly in the start routine.
Regards. -
Unicode complaincy check for ABAP included in Start Routines
Hi,
we are planning to run unicode conversion for BW and we have tried to analyze our system with UCCHECK transaction to make sure that ABAP would be complaint with unicode. It's mentioned in documentation that this transaction is only capable of executing the check for certain objects, but are we able to make sure that our ABAP routines are unicode complaint? Should would go them through one by on?
BR, GerdDeclare all the data you use inside form STARTUP at the top. It's really bad practice to define it in the middle of your logic. Use a SORTED table rather than a standard.
TYPES: BEGIN OF t_b05_o00200_ty,
h_callnr LIKE /bic/ab05_o00200-/bic/bcallnr,
h_callsts LIKE /bic/ab05_o00200-/bic/bcallsts,
h_sdate LIKE /bic/ab05_o00200-/bic/bstatd,
h_stime LIKE /bic/ab05_o00200-/bic/bstatt,
END OF t_b05_o00200.
DATA: t_b05_o00200 TYPE SORTED TABLE OF z_b05_o00200_ty WITH NON-UNIQUE KEY h_callnr h_callsts
READ TABLE t_b05_o00200 WITH TABLE KEY h_callnr = data_package-/bic/bcallnr
h_callsts = 'OPEN'
ASSIGNING <sla_record>.
READ TABLE t_b05_o00200 WITH TABLE KEY h_callnr = data_package-/bic/bcallnr
h_callsts = 'WORK IN PROGRESS'
ASSIGNING <sla_record>.
If you KNOW that the key h_callnr and h_callsts is UNIQUE, then define the table as
DATA: t_b05_o00200 TYPE HASHED TABLE OF z_b05_o00200_ty WITH UNIQUE KEY h_callnr h_callsts
The other code remains as above. This will give the biggest performance hike.
Please learn to use the tags to make your code readable. And also, offering points is against the rules of these forums.
matt -
Error in abap coding in start routine..
Hello Gurus,
I am having difficulty run this program, can anyone advise?
IF wa_datapackage-calday LT l_rundate.
SELECT SINGLE /BIC/AUMR05005
INTO l_latestvisitdate
FROM /BIC/PAUMRSO0200
WHERE fiscper = wa_datapackage-fiscper AND "fiscper
/BIC/AUMR01310 = wa_datapackage-/BIC/AUMR01300 AND "customer
/BIC/AUMR02001 = wa_datapackage-/BIC/AUMR02001 AND "product
/BIC/AUMR03204 = wa_datapackage-/BIC/AUMR03204 AND "questions
/BIC/AUMR03202 = wa_datapackage-/BIC/AUMR03202. "subject
IF sy-subrc = 0.
IF wa_datapackage-calday > l_latestvisitdate.
APPEND wa_datapackage TO lt_datapackage.
ENDIF.
ENDIF.
ELSE.
APPEND wa_datapackage TO lt_datapackage.
ENDIF.
The above program gies the following error:
E:"/BIC/PAUMRSO0200" is not defined in the ABAP Dictionary as a table, projection view or database view.
Can you suggest any probable solution?
Thanks & Regards,
JPHi JP,
Check in SE11, /BIC/AUMR05005 may be defined as a structure, not as a table or view.
You may need to use some other table or view.
Reward points if useful.
Regards,
Atish
Maybe you are looking for
-
Hello friends, How can we print numbers in words like 800 as Eight Hundred. TIA shekar.
-
It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer. Whenever i press "transfer purchased items from ipod", itunes sync's for about 3 seconds, but I still can't install updates
-
BPM build for asyc to sync to async scenario
Hi , I have a scenario where 1. abap proxy triggers and sends no of records and sequence id... 2. i'l update the JDBC recvr 3.the JDBC sends an acknowledgement no of records updated. kindly help how to build a BPM for this scenario to compare the n
-
Is it possible to require password AND fingerprint scan (T500 Win7 Pro)
Is there any way to set up 2 factor (fingerprint and password) authentication for a higher level of security? I couldn't find any configuration options to do this, and my forum searches all brought back zero or thousands or posts. Any ideas?
-
Converting excel file to PDF using Adobe 9 standard on windows XP
I have installed office 2010 SP1 on a computer and it already has adobe 9 installed. user never had problem with converting multi sheet excel workbook to PDF using MSoffice 2003. Now, when we open excel files in EXCEL 2010 then try to print it to ado