ABAP Code to get Production Order Quantity for a material-Status REL,CRTD

hi all,
I am new to SAP. I am stuck with a problem while writing a abap code for getting all the production order quantities for a material with System Status REL and CRTD. Please help me out. This is what i tried to do.
IF t_mat[] IS NOT INITIAL.
    t_mat2[] = t_mat[].
    SORT t_mat2 BY matnr.
    DELETE ADJACENT DUPLICATES FROM t_mat2 COMPARING matnr werks.
    SELECT auaufnr afgamng af~plnbez INTO CORRESPONDING FIELDS OF
    TABLE t_ord1 FROM afko AS af INNER JOIN aufk AS au ON
      afaufnr = auaufnr
    FOR ALL ENTRIES IN t_mat2
    WHERE af~plnbez = t_mat2-matnr
    AND   au~werks = t_mat2-werks
    AND   af~gltrs IN s_gltrs
    AND   af~gstri IN s_gstri
    AND   au~phas0 IN s_phas0
    AND   au~phas1 IN s_phas1.
ENDIF.
Thanks. Regards.
Sandeep

Hi
There is one std tcode COOIS where u can get the information what u have asked
Pls check
regards
Vijay

Similar Messages

To get open order quantity for list of materials

Hi Gurus,
I have a typical requirement for development of 1 function module and below are the details for it:
I want to have the open order quantity (pending for delivery & PGI) for materials by entering sold-to-party, ship-to-party and sales organisation.
Can i get list of all the materials when are open with the quantity of that materials which are yet to be delivered. And I have only ship-to-party and sales organisation as input parameter.
I would prefer if standard function module is available or I would also like to have some code or logic to ful fill the above requirement. And also I would like to inform you that I have check VA05 transaction and it is not useful to me as it does not take into consideration partial delivery. I have also check backorder list transaction V_05 and it is not useful too.
Please reply me fast as I am in urgent requirement of this.
If you are not clear in requirement then please let me know.
Regards,
Sagar

Rich,
No.
This is for creating custom VA01 transaction.
Before creating the SO, I need to validate the minimum order quantity for each material for that customer.
Thanks
Sundar

How to get Production Order Quantity

I have material number and plant. From this information how to get production order quantity that is displayed in the transaction MD04.
Thanks,
Vinay.

Hi Vinay,
Have you looked FM <b>MD_STOCK_REQUIREMENTS_LIST_API</b>?
Hope this will help.
Regards,
Ferry ianto

How to get the open order quantity for a material

Hi All,
We need to get the open order quantity for materials. At present we are using the following logic...
SELECT VBAKVBELN VBAPPOSNR VBAP~KWMENG
    INTO TABLE IT_VBAP
FROM VBAP
INNER JOIN VBAK ON VBAKVBELN   = VBAPVBELN
INNER JOIN VAPMA ON VAPMAVBELN = VBAPVBELN
                  AND VAPMAPOSNR = VBAPPOSNR
INNER JOIN VBUP ON VBUPVBELN = VBAPVBELN
                 AND VBUPPOSNR = VBAPPOSNR
WHERE VAPMA~MATNR = IT_OUTPUT-MATNR
   AND VAPMA~WERKS = IT_OUTPUT-WERKS
    AND VBAK~AUART IN S_AUART
     AND VBUP~GBSTA NE 'C'.
But the Query takes quite a long time as it does a full range scan on all the tables. Is there any way the query can be improved, may be by creating an index etc? Or is there anyother way by which i can get the required data?
Any input is appreciated.
Regards
Brain.

This could help.
*& Report: zsdvr055                date written: 03/24/00              *
*& Author: Brian Huntley           last update: 03/24/00               *
*& Program Title: Open Order Report                                    *
*& Description: This report will create a list of sales documents      *
*&   that are open (contain at least one item that is not shipped).    *
*&   The report will sort by ship-to customer name and by sales        *
*&   document number.                                                  *
*& Tables:                                                             *
*& Files:                                                              *
*& Transactions:                                                       *
*& Changes:                                                            *
REPORT ZSDVR055 LINE-SIZE 255.
TABLES: VBPA,
        VBAP,
        VBUP,
        VBAK,
        VBKD,
        KNA1,
        VBEP,
        VBFA,
        LIKP,
        LIPS,
        EKET,
        T171T.
define hashed table for selected ship-to and sold-to SO's
TYPES: BEGIN OF TVBPA_TYPE,
         VBELN LIKE VBPA-VBELN,               "sales document
         POSNR LIKE VBPA-POSNR,               "item number
         PARVW LIKE VBPA-PARVW,               "partner function
         KUNNR LIKE VBPA-KUNNR,               "customer number
       END OF TVBPA_TYPE.
DATA: TVBPA TYPE HASHED TABLE OF TVBPA_TYPE
        WITH UNIQUE KEY VBELN POSNR PARVW WITH HEADER LINE.
define internal table for all selected SO's
DATA: BEGIN OF ITAB0 OCCURS 0,
        VBELN LIKE VBPA-VBELN,                "sales document
      END OF ITAB0.
define internal table for all selected SO items
DATA: BEGIN OF ITAB OCCURS 0,
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        MATNR LIKE VBAP-MATNR,                "material
        ARKTX LIKE VBAP-ARKTX,                "description
        PSTYV LIKE VBAP-PSTYV,                "item category
        KDMAT LIKE VBAP-KDMAT,                "customer material
        NETWR LIKE VBAP-NETWR,                "net value
        WAERK LIKE VBAP-WAERK,                "currency
        KWMENG LIKE VBAP-KWMENG,              "quantity
        ERDAT LIKE VBAP-ERDAT,                "entry date
        NETPR LIKE VBAP-NETPR,                "net price
        KPEIN LIKE VBAP-KPEIN,                "pricing unit
        PRCTR LIKE VBAP-PRCTR,                "profit center
        ERNAM LIKE VBAK-ERNAM,                "entered by
        AUART LIKE VBAK-AUART,                "order type
        VKORG LIKE VBAK-VKORG,                "sales organization
        VTWEG LIKE VBAK-VTWEG,                "distribution channel
        VDATU LIKE VBAK-VDATU,                "requested date (header)
        BNAME LIKE VBAK-BNAME,                "name of orderer
        KUNNR LIKE VBAK-KUNNR,                "sold-to customer
        BZIRK LIKE VBKD-BZIRK,                "sales district
        KURSK LIKE VBKD-KURSK,                "conversion rate
        BSTKD LIKE VBKD-BSTKD,                "customer PO
        LFGSA LIKE VBUP-LFGSA,                "overall delivery status
        FKSAA LIKE VBUP-FKSAA,                "overall billing status
        KUNWE LIKE VBPA-KUNNR,                "ship-to customer
        NAME1 LIKE KNA1-NAME1,                "ship-to customer name
        ORT01 LIKE KNA1-ORT01,                "ship-to address
        REGIO LIKE KNA1-REGIO,                "ship-to region (state)
        LAND1 LIKE KNA1-LAND1,                "ship-to country
      END OF ITAB.
create internal table for open orders
DATA: BEGIN OF ITAB1 OCCURS 0,
        KUNNR LIKE VBAK-KUNNR,                "sold-to customer
        KUNWE LIKE VBPA-KUNNR,                "ship-to customer
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        ZDATE1 LIKE VBEP-EDATU,               "requested date
        ZDATE2 LIKE VBEP-EDATU,               "scheduled date (confirm)
        ZDATE3 LIKE VBEP-EDATU,               "committed date
        ZQTY1 LIKE VBAP-KWMENG,               "qty ordered
        ZQTY2 LIKE VBEP-BMENG,                "backlog qty
        ZEXTD LIKE VBAP-NETWR,                "backlog net value
        ZDESC(30) TYPE C,                     "backlog description
      END OF ITAB1.
define internal table for SO schedule lines
DATA: BEGIN OF ITAB2A OCCURS 0,
        WADAT LIKE VBEP-WADAT,                "planned goods issue date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        WMENG LIKE VBEP-WMENG,                "qty ordered
        BMENG LIKE VBEP-BMENG,                "qty confirmed
      END OF ITAB2A.
define internal table for SO item request dates
DATA: BEGIN OF ITAB2B OCCURS 0,
        EDATU LIKE VBEP-EDATU,                "delivery date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        WMENG LIKE VBEP-WMENG,                "qty ordered
      END OF ITAB2B.
define internal table for SO item commit dates
DATA: BEGIN OF ITAB2C OCCURS 0,
        EDATU LIKE VBEP-EDATU,                "delivery date
        VBELN LIKE VBAP-VBELN,                "document number
        POSNR LIKE VBAP-POSNR,                "item number
        ROMS1 LIKE VBEP-WMENG,                "committed qty
      END OF ITAB2C.
define internal table for SO item deliveries
DATA: BEGIN OF ITAB3 OCCURS 0,
        VGBEL LIKE LIPS-VGBEL,                "sales document
        VGPOS LIKE LIPS-VGPOS,                "sales document item
        VBELN LIKE LIKP-VBELN,                "delivery number
        POSNR LIKE LIPS-POSNR,                "delivery item number
        WADAT LIKE LIKP-WADAT,                "planned GI date
        WADAT_IST LIKE LIKP-WADAT_IST,        "actual GI date
        LFIMG LIKE LIPS-LFIMG,                "actual qty delivered
        ERDAT LIKE LIKP-ERDAT,                "date created
        ERZET LIKE LIKP-ERZET,                "time created
      END OF ITAB3.
define internal table for SO item / delivery cross reference
DATA: BEGIN OF ITAB4 OCCURS 0,
        VBELV LIKE VBFA-VBELV,                "sales document
        POSNV LIKE VBFA-POSNV,                "sales document item
        VBELN LIKE VBFA-VBELN,                "delivery number
        POSNN LIKE VBFA-POSNN,                "delivery item
        VBTYP_N LIKE VBFA-VBTYP_N,            "document category
        RFMNG LIKE VBFA-RFMNG,                "qty delivered
        PLMIN LIKE VBFA-PLMIN,                "plus/minus flag
      END OF ITAB4.
define local variables
DATA: ORDR_QTY LIKE VBEP-WMENG,          "order qty
      CONF_QTY LIKE VBEP-BMENG,          "confirmed qty
      NOCONF_QTY LIKE VBEP-BMENG,        "qty not confirmed
      DELV_QTY LIKE VBEP-WMENG,          "qty delivered
      NODELV_QTY LIKE VBEP-WMENG,        "qty not delivered
      REMAIN_QTY LIKE VBEP-WMENG,        "qty remain to get conf date
      REQ_DATE LIKE VBEP-EDATU,          "request date
      COM_DATE LIKE VBEP-EDATU,          "committed date
      DELV_QTY1 LIKE VBEP-WMENG,         "preceding delivery qty
      REMAIN_QTY1 LIKE VBEP-WMENG,       "qty remain to get reqest date
      REMAIN_QTY2 LIKE VBEP-WMENG,       "qty remain to get commit date
      THIRD_QTY LIKE VBEP-WMENG,         "3rd party no PO qty
      SO_STOCK LIKE MSKA-KALAB,          "sales order stock
      ZPRICE LIKE VBAP-NETPR,            "unit price USD
      ADRS1(40) TYPE C,                  "concatenated city and region
      ADRS2(45) TYPE C,                  "city, region and country
      ADRS3(80) TYPE C,                  "name, city, rgn, ctry
      ZCNTR TYPE I.                      "counter
define select options
SELECTION-SCREEN BEGIN OF BLOCK BLK1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VKORG FOR VBAK-VKORG DEFAULT '1000',
S_VTWEG FOR VBAK-VTWEG DEFAULT '10' NO-DISPLAY,
S_SPART FOR VBAK-SPART DEFAULT '00' NO-DISPLAY,
S_KUNNR FOR VBPA-KUNNR MATCHCODE OBJECT DEBI,
S_KUNWE FOR VBPA-KUNNR MATCHCODE OBJECT DEBI.
SELECTION-SCREEN SKIP.
SELECT-OPTIONS:
S_BZIRK FOR VBKD-BZIRK,
S_PRCTR FOR VBAP-PRCTR,
S_MATNR FOR VBAP-MATNR MATCHCODE OBJECT MAT1,
S_ERNAM FOR VBAK-ERNAM,
S_ERDAT FOR VBAP-ERDAT.
SELECTION-SCREEN END OF BLOCK BLK1.
AT SELECTION-SCREEN.
IF S_KUNNR IS INITIAL AND S_KUNWE IS INITIAL.
    MESSAGE E005(ZM) WITH TEXT-100.
ENDIF.
MAIN PROGRAM
INITIALIZATION.
INCLUDE ZSYHEADR.
START-OF-SELECTION.
PERFORM 100_GET_SO_ITEMS.
PERFORM 200_GET_NO_DELIVERY.
PERFORM 300_GET_NO_GOODS_ISSUE.
PERFORM 400_GET_PARTIAL_DELIVERY.
PERFORM 500_GET_THIRD_PARTY.
PERFORM 900_CREATE_LIST.
FORM 100_GET_SO_ITEMS
FORM 100_GET_SO_ITEMS.
get SO's for selected ship-to and sold-to customers
REFRESH TVBPA.
IF NOT S_KUNNR IS INITIAL.
    SELECT VBELN POSNR PARVW KUNNR
      FROM VBPA INTO TABLE TVBPA
     WHERE KUNNR IN S_KUNNR AND PARVW = 'AG' AND VBELN < '0080000000'.
ENDIF.
IF NOT S_KUNWE IS INITIAL.
    SELECT VBELN POSNR PARVW KUNNR
      FROM VBPA APPENDING TABLE TVBPA
      WHERE KUNNR IN S_KUNWE AND PARVW = 'WE' AND VBELN < '0080000000'.
ENDIF.
DESCRIBE TABLE TVBPA LINES ZCNTR.
IF ZCNTR = 0.
    WRITE: /1 'No data found for selection'.
    STOP.
ENDIF.
eliminate duplicate SO's
LOOP AT TVBPA.
    CLEAR ITAB0.
    MOVE TVBPA-VBELN TO ITAB0-VBELN.
    APPEND ITAB0.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM ITAB0.
get SO detail
SELECT VBAP~VBELN VBAP~POSNR VBAP~MATNR VBAP~ARKTX VBAP~PSTYV
      VBAP~KDMAT VBAP~NETWR VBAP~WAERK VBAP~KWMENG VBAP~ERDAT
      VBAP~NETPR VBAP~KPEIN VBAP~PRCTR VBAK~ERNAM VBAK~AUART
      VBAK~VKORG VBAK~VTWEG VBAK~VDATU VBAK~BNAME VBAK~KUNNR
      VBKD~BZIRK VBKD~KURSK VBKD~BSTKD VBUP~LFGSA VBUP~FKSAA
    FROM VBAP INNER JOIN VBUP ON VBUP~VBELN = VBAP~VBELN AND
        VBUP~POSNR = VBAP~POSNR
      INNER JOIN VBKD ON VBKD~VBELN = VBAP~VBELN AND
        VBKD~POSNR = VBAP~POSNR
      INNER JOIN VBAK ON VBAK~VBELN = VBAP~VBELN
    INTO TABLE ITAB FOR ALL ENTRIES IN ITAB0
    WHERE VBAP~VBELN = ITAB0-VBELN AND VBAP~MATNR IN S_MATNR AND
      VBAP~ERDAT IN S_ERDAT AND VBAP~PRCTR IN S_PRCTR AND
      VBAP~ABGRU = SPACE AND VBKD~BZIRK IN S_BZIRK AND
      VBAK~VKORG IN S_VKORG AND VBAK~VTWEG IN S_VTWEG AND
      VBAK~SPART IN S_SPART AND VBAK~KUNNR IN S_KUNNR AND
      VBAK~ERNAM IN S_ERNAM.
IF SY-SUBRC <> 0.
    WRITE: /1 'No data found for selection'.
    STOP.
ENDIF.
loop thru SO items
LOOP AT ITAB.
get ship-to customer
    IF NOT S_KUNWE IS INITIAL.
      CLEAR TVBPA.
      READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
        POSNR = ITAB-POSNR PARVW = 'WE'.
      IF SY-SUBRC <> 0.
        READ TABLE TVBPA WITH TABLE KEY VBELN = ITAB-VBELN
          POSNR = '000000' PARVW = 'WE'.
      ENDIF.
      MOVE TVBPA-KUNNR TO ITAB-KUNWE.
    ELSE.
      CLEAR ITAB-KUNWE.
      SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          PARVW = 'WE'.
      IF SY-SUBRC <> 0.
        SELECT SINGLE KUNNR FROM VBPA INTO ITAB-KUNWE
          WHERE VBELN = ITAB-VBELN AND POSNR = '000000' AND
            PARVW = 'WE'.
      ENDIF.
    ENDIF.
    IF NOT ITAB-KUNWE IN S_KUNWE.
      DELETE ITAB.
      CONTINUE.
    ENDIF.
get ship-to customer address info
    SELECT SINGLE NAME1 ORT01 REGIO LAND1 FROM KNA1
      INTO (ITAB-NAME1, ITAB-ORT01, ITAB-REGIO, ITAB-LAND1)
      WHERE KUNNR = ITAB-KUNWE.
    MODIFY ITAB.
ENDLOOP.
SORT ITAB BY VBELN POSNR.
ENDFORM.
FORM 200_GET_NO_DELIVERY
get detail for SO items w/ no deliveries for order document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 200_GET_NO_DELIVERY.
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
    AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
    AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
    AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = A (not delivered)
    IF ITAB-LFGSA = 'A'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
select schedule lines for SO item and write to internal table itab2a
      SELECT WADAT VBELN POSNR WMENG BMENG
        FROM VBEP INTO TABLE ITAB2A
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
select sched lines w/request date and write to internal table itab2b
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
select sched lines w/commit date and write to internal table itab2c
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2A BY WADAT.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
      ORDR_QTY = 0.
      CONF_QTY = 0.
      NOCONF_QTY = 0.
calculate the unconfirmed qty for a SO item
      LOOP AT ITAB2A.
        CONF_QTY = CONF_QTY + ITAB2A-BMENG.
        ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
      ENDLOOP.
      NOCONF_QTY = ORDR_QTY - CONF_QTY.
      LOOP AT ITAB2A WHERE BMENG <> 0.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING ITAB2A-BMENG REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING ITAB2A-BMENG COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = ITAB2A-WADAT.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = ITAB2A-BMENG.
        ITAB1-ZDESC = 'no delivery, confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDLOOP.
get request date for SO item
      IF NOCONF_QTY <> 0.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING NOCONF_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING NOCONF_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = NOCONF_QTY.
        ITAB1-ZDESC = 'no delivery, not confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 300_GET_NO_GOODS_ISSUE
get detail for SO items w/deliveries and no goods issue for
doc types (ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 300_GET_NO_GOODS_ISSUE.
get detail for deliveries w/no goods issue
SELECT VBELN WADAT WADAT_IST ERDAT ERZET
    FROM LIKP INTO (LIKP-VBELN, LIKP-WADAT, LIKP-WADAT_IST,
      LIKP-ERDAT, LIKP-ERZET)
    WHERE WADAT_IST = 0.
select if actual qty delivered <> 0
    CLEAR LIPS.
    SELECT POSNR VGBEL VGPOS LFIMG
      FROM LIPS INTO (LIPS-POSNR, LIPS-VGBEL, LIPS-VGPOS, LIPS-LFIMG)
      WHERE VBELN = LIKP-VBELN AND LFIMG <> 0.
select if goods movement status on delivery = A (no goods issue)
      CLEAR VBUP.
      SELECT SINGLE WBSTA FROM VBUP INTO VBUP-WBSTA
        WHERE VBELN = LIKP-VBELN AND POSNR = LIPS-POSNR.
      IF VBUP-WBSTA = 'A'.
        CLEAR ITAB3.
        ITAB3-VGBEL = LIPS-VGBEL.
        ITAB3-VGPOS = LIPS-VGPOS.
        ITAB3-VBELN = LIKP-VBELN.
        ITAB3-POSNR = LIPS-POSNR.
        ITAB3-WADAT = LIKP-WADAT.
        ITAB3-WADAT_IST = LIKP-WADAT_IST.
        ITAB3-LFIMG = LIPS-LFIMG.
        ITAB3-ERDAT = LIKP-ERDAT.
        ITAB3-ERZET = LIKP-ERZET.
        APPEND ITAB3.
      ENDIF.
    ENDSELECT.
ENDSELECT.
SORT ITAB3 BY VGBEL VGPOS VBELN POSNR.
loop thru deliveries w/no goods issue and get SO item detail
LOOP AT ITAB3.
    CLEAR ITAB.
    READ TABLE ITAB WITH KEY VBELN = ITAB3-VGBEL POSNR = ITAB3-VGPOS.
    IF SY-SUBRC <> 0.
      IF ITAB-AUART = 'ZZOR' OR ITAB-AUART = 'ZZC1' OR
        ITAB-AUART = 'ZZCO' OR ITAB-AUART = 'ZZRP' OR
        ITAB-AUART = 'ZZRW' OR ITAB-AUART = 'KE' OR
        ITAB-AUART = 'KR' OR ITAB-AUART = 'ZCHP' OR
        ITAB-AUART = 'ZPSO' OR ITAB-AUART = 'ZZNC'.
assign values to detail fields
        CLEAR ITAB1.
        ITAB1-KUNNR = ITAB-KUNNR.
        ITAB1-KUNWE = ITAB-KUNWE.
        ITAB1-VBELN = ITAB-VBELN.
        ITAB1-POSNR = ITAB-POSNR.
        IF ITAB-KURSK = 0.
          ITAB-KURSK = 1.
        ENDIF.
        IF ITAB-KPEIN = 0.
          ITAB-KPEIN = 1.
        ENDIF.
select delivery qty for SO item and write to internal table
        SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
          FROM VBFA INTO TABLE ITAB4
          WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
            ( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
        DELV_QTY = 0.
        DELV_QTY1 = 0.
        LOOP AT ITAB4.
          IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
              ITAB-AUART = 'KR').
            IF ITAB4-PLMIN = '-'.
              ITAB4-RFMNG = ITAB4-RFMNG * -1.
            ENDIF.
determine if delivery for SO item precedes delivery w/no goods
issue (to determine request date and qty)
            CLEAR LIKP.
            SELECT SINGLE ERDAT ERZET
              FROM LIKP INTO (LIKP-ERDAT, LIKP-ERZET)
              WHERE VBELN = ITAB4-VBELN.
            IF LIKP-ERDAT < ITAB3-ERDAT OR ( LIKP-ERDAT = ITAB3-ERDAT
                AND LIKP-ERZET < ITAB3-ERZET ).
              DELV_QTY1 = DELV_QTY1 + ITAB4-RFMNG.
            ENDIF.
            DELV_QTY = DELV_QTY + ITAB4-RFMNG.
          ENDIF.
        ENDLOOP.
get request dates for SO item
        REFRESH ITAB2B.
        SELECT EDATU VBELN POSNR WMENG
          FROM VBEP INTO TABLE ITAB2B
          WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
            WMENG <> 0.
select sched lines w/commit date and write to itab2c
        REFRESH ITAB2C.
        SELECT EDATU VBELN POSNR ROMS1
          FROM VBEP INTO TABLE ITAB2C
          WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
            ROMS1 <> 0.
        SORT ITAB2B BY EDATU.
        SORT ITAB2C BY EDATU.
loop thru request dates and delete request date entries for
quantity(s) for preceding deliveries
        REMAIN_QTY1 = DELV_QTY1.
        LOOP AT ITAB2B.
          IF ITAB2B-WMENG > REMAIN_QTY1.
            ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
            MODIFY ITAB2B.
            EXIT.
          ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
            DELETE ITAB2B.
            EXIT.
          ELSE.
            REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
            DELETE ITAB2B.
          ENDIF.
        ENDLOOP.
loop thru commit dates and delete commit date entries for
quantity(s) for preceding deliveries
        REMAIN_QTY2 = DELV_QTY1.
        LOOP AT ITAB2C.
          IF ITAB2C-ROMS1 > REMAIN_QTY2.
            ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
            MODIFY ITAB2C.
            EXIT.
          ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
            DELETE ITAB2C.
            EXIT.
          ELSE.
            REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
            DELETE ITAB2C.
          ENDIF.
        ENDLOOP.
if planned goods issue date is 0, put qty in non-confirmed
get request date for SO item
        IF ITAB3-WADAT <> 0.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING ITAB3-LFIMG REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING ITAB3-LFIMG COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = ITAB3-WADAT.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = ITAB3-LFIMG.
          ITAB1-ZDESC = 'delivery, no goods issue'.
        ELSE.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING ITAB3-LFIMG REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING ITAB3-LFIMG COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = '99991231'.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = ITAB3-LFIMG.
          ITAB1-ZDESC = 'delivery, no goods issue date'.
        ENDIF.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 400_GET_PARTIAL_DELIVERY
get detail for SO items w/partial deliveries for document types
(ZZOR, ZZC1, ZZCO, ZZRP, ZZRW, KE, KR, ZCHP, ZPSO, ZZNC)
FORM 400_GET_PARTIAL_DELIVERY.
process SO items for selected order types
LOOP AT ITAB WHERE AUART = 'ZZOR' OR AUART = 'ZZC1' OR
      AUART = 'ZZCO' OR AUART = 'ZZRP' OR AUART = 'ZZRW' OR
      AUART = 'KE' OR AUART = 'KR' OR AUART = 'ZCHP' OR
      AUART = 'ZPSO' OR AUART = 'ZZNC'.
select if delivery status = B (partially delivered)
    IF ITAB-LFGSA = 'B'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
select delivery qty for SO item and write to internal table
      SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
        FROM VBFA INTO TABLE ITAB4
        WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
          ( VBTYP_N = 'J' OR VBTYP_N = 'T' ).
calculate total delivery qty for SO item
      DELV_QTY = 0.
      LOOP AT ITAB4.
        IF ITAB4-VBTYP_N = 'J' OR ( ITAB4-VBTYP_N = 'T' AND
            ITAB-AUART = 'KR').
          IF ITAB4-PLMIN = '-'.
            ITAB4-RFMNG = ITAB4-RFMNG * -1.
          ENDIF.
          DELV_QTY = DELV_QTY + ITAB4-RFMNG.
        ENDIF.
      ENDLOOP.
select schedule lines for SO item and write to internal table
      REFRESH ITAB2A.
      SELECT WADAT VBELN POSNR WMENG BMENG
        FROM VBEP INTO TABLE ITAB2A
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR.
get request dates from schedule line table
      REFRESH ITAB2B.
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
get commit dates from schedule line table
      REFRESH ITAB2C.
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
      SORT ITAB2A BY WADAT.
loop thru request dates and delete request date entries for
quantity(s) already delivered
      REMAIN_QTY1 = DELV_QTY.
      LOOP AT ITAB2B.
        IF ITAB2B-WMENG > REMAIN_QTY1.
          ITAB2B-WMENG = ITAB2B-WMENG - REMAIN_QTY1.
          MODIFY ITAB2B.
          EXIT.
        ELSEIF ITAB2B-WMENG = REMAIN_QTY1.
          DELETE ITAB2B.
          EXIT.
        ELSE.
          REMAIN_QTY1 = REMAIN_QTY1 - ITAB2B-WMENG.
          DELETE ITAB2B.
        ENDIF.
      ENDLOOP.
loop thru commit dates and delete request date entries for
quantity(s) already delivered
      REMAIN_QTY2 = DELV_QTY.
      LOOP AT ITAB2C.
        IF ITAB2C-ROMS1 > REMAIN_QTY2.
          ITAB2C-ROMS1 = ITAB2C-ROMS1 - REMAIN_QTY2.
          MODIFY ITAB2C.
          EXIT.
        ELSEIF ITAB2C-ROMS1 = REMAIN_QTY2.
          DELETE ITAB2C.
          EXIT.
        ELSE.
          REMAIN_QTY2 = REMAIN_QTY2 - ITAB2C-ROMS1.
          DELETE ITAB2C.
        ENDIF.
      ENDLOOP.
       ORDR_QTY = 0.
       CONF_QTY = 0.
       NOCONF_QTY = 0.
calculate the unconfirmed qty for SO item
      LOOP AT ITAB2A.
        ORDR_QTY = ORDR_QTY + ITAB2A-WMENG.
        CONF_QTY = CONF_QTY + ITAB2A-BMENG.
      ENDLOOP.
      NOCONF_QTY = ORDR_QTY - CONF_QTY.
      NODELV_QTY = ORDR_QTY - DELV_QTY.
loop thru schedule lines and process entries with no related
delivery(s)
      REMAIN_QTY = DELV_QTY.
      LOOP AT ITAB2A.
        IF ITAB2A-BMENG <> 0.
          IF ITAB2A-BMENG <= REMAIN_QTY.
            REMAIN_QTY = REMAIN_QTY - ITAB2A-BMENG.
          ELSE.
            ITAB2A-BMENG = ITAB2A-BMENG - REMAIN_QTY.
            PERFORM GET_REQUEST_DATE TABLES ITAB2B
              USING ITAB2A-BMENG REQ_DATE.
            PERFORM GET_COMMIT_DATE TABLES ITAB2C
              USING ITAB2A-BMENG COM_DATE.
            ITAB1-ZDATE1 = REQ_DATE.
            ITAB1-ZDATE2 = ITAB2A-WADAT.
            ITAB1-ZDATE3 = COM_DATE.
            ITAB1-ZQTY1 = ITAB-KWMENG.
            ITAB1-ZQTY2 = ITAB2A-BMENG.
            ITAB1-ZDESC = 'partial delivery'.
calculate net value for backlog qty
            ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
            ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
            IF ITAB-AUART = 'KR'.
              ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
              ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
              ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
            ENDIF.
            APPEND ITAB1.
            REMAIN_QTY = 0.
          ENDIF.
        ENDIF.
      ENDLOOP.
if total unconfirmed >= total not delivered, qty is unconfirmed
      IF NOCONF_QTY >= NODELV_QTY.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING NODELV_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING NODELV_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE3 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = NODELV_QTY.
        ITAB1-ZDESC = 'partial delv, not confirmed'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
if order type is consignment return (KR), reverse sign
        IF ITAB-AUART = 'KR'.
          ITAB1-ZQTY1 = ITAB1-ZQTY1 * -1.
          ITAB1-ZQTY2 = ITAB1-ZQTY2 * -1.
          ITAB1-ZEXTD = ITAB1-ZEXTD * -1.
        ENDIF.
        APPEND ITAB1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 500_GET_THIRD_PARTY
get detail for third party SO items
FORM 500_GET_THIRD_PARTY.
process SO items for selected order types
LOOP AT ITAB WHERE PSTYV = 'TAS' AND ( AUART = 'ZZOR' OR
    AUART = 'ZZC1' OR AUART = 'ZZCO' OR AUART = 'ZZRP' OR
    AUART = 'ZZRW' OR AUART = 'KE' OR AUART = 'KR' OR
    AUART = 'ZCHP' OR AUART = 'ZPSO' OR AUART = 'ZZNC' ).
select if billing status <> C (billed)
    IF ITAB-FKSAA <> 'C'.
assign values to detail fields
      CLEAR ITAB1.
      ITAB1-KUNNR = ITAB-KUNNR.
      ITAB1-KUNWE = ITAB-KUNWE.
      ITAB1-VBELN = ITAB-VBELN.
      ITAB1-POSNR = ITAB-POSNR.
      IF ITAB-KURSK = 0.
        ITAB-KURSK = 1.
      ENDIF.
      IF ITAB-KPEIN = 0.
        ITAB-KPEIN = 1.
      ENDIF.
get request dates from schedule line table
      REFRESH ITAB2B.
      SELECT EDATU VBELN POSNR WMENG
        FROM VBEP INTO TABLE ITAB2B
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          WMENG <> 0.
get commit dates from schedule line table
      REFRESH ITAB2C.
      SELECT EDATU VBELN POSNR ROMS1
        FROM VBEP INTO TABLE ITAB2C
        WHERE VBELN = ITAB-VBELN AND POSNR = ITAB-POSNR AND
          ROMS1 <> 0.
      SORT ITAB2B BY EDATU.
      SORT ITAB2C BY EDATU.
get PO number(s) for SO item and write to internal table
      REFRESH ITAB4.
      SELECT VBELV POSNV VBELN POSNN VBTYP_N RFMNG PLMIN
        FROM VBFA INTO TABLE ITAB4
        WHERE VBELV = ITAB-VBELN AND POSNV = ITAB-POSNR AND
          VBTYP_N = 'V' AND RFMNG <> 0.
calculate total delivery qty for PO item
      DELV_QTY = 0.
      LOOP AT ITAB4.
        IF ITAB4-PLMIN = '-'.
          ITAB4-RFMNG = ITAB4-RFMNG * -1.
        ENDIF.
        DELV_QTY = DELV_QTY + ITAB4-RFMNG.
      ENDLOOP.
loop thru PO's for SO item
      LOOP AT ITAB4.
select delivery lines for PO item
        SELECT EINDT EBELN EBELP MENGE FROM EKET
          INTO (EKET-EINDT, EKET-EBELN, EKET-EBELP, EKET-MENGE)
          WHERE EBELN = ITAB4-VBELN AND EBELP = ITAB4-POSNN.
          PERFORM GET_REQUEST_DATE TABLES ITAB2B
            USING EKET-MENGE REQ_DATE.
          PERFORM GET_COMMIT_DATE TABLES ITAB2C
            USING EKET-MENGE COM_DATE.
          ITAB1-ZDATE1 = REQ_DATE.
          ITAB1-ZDATE2 = EKET-EINDT.
          ITAB1-ZDATE3 = COM_DATE.
          ITAB1-ZQTY1 = ITAB-KWMENG.
          ITAB1-ZQTY2 = EKET-MENGE.
          ITAB1-ZDESC = '3rd party item'.
calculate net value for backlog qty
          ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
          ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
          APPEND ITAB1.
        ENDSELECT.
      ENDLOOP.
if total delivery qty < order qty, put remaining in non-confirmed
      IF DELV_QTY < ITAB-KWMENG.
        THIRD_QTY = ITAB-KWMENG - DELV_QTY.
        PERFORM GET_REQUEST_DATE TABLES ITAB2B
          USING THIRD_QTY REQ_DATE.
        PERFORM GET_COMMIT_DATE TABLES ITAB2C
          USING THIRD_QTY COM_DATE.
        ITAB1-ZDATE1 = REQ_DATE.
        ITAB1-ZDATE2 = '99991231'.
        ITAB1-ZDATE2 = COM_DATE.
        ITAB1-ZQTY1 = ITAB-KWMENG.
        ITAB1-ZQTY2 = THIRD_QTY.
        ITAB1-ZDESC = '3rd party item, no PO'.
calculate net value for backlog qty
        ZPRICE = ( ITAB-NETPR / ITAB-KPEIN ) * ITAB-KURSK.
        ITAB1-ZEXTD = ITAB1-ZQTY2 * ZPRICE.
        APPEND ITAB1.
        CONTINUE.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.
FORM 900_CREATE_LIST
process open business detail and create list
FORM 900_CREATE_LIST.
if internal table is empty, write message and exit
    DESCRIBE TABLE ITAB1 LINES ZCNTR.
    IF ZCNTR = 0.
      WRITE: / 'No Data Found for Selection'.
      STOP.
    ENDIF.
    SORT ITAB1 BY KUNNR KUNWE VBELN POSNR.
loop thru sorted table and create list
    LOOP AT ITAB1.
      IF ITAB1-ZDATE1 = SPACE.
        ITAB1-ZDATE1 = '99991231'.
      ENDIF.
      IF ITAB1-ZDATE3 = SPACE.
        ITAB1-ZDATE3 = '99991231'.
      ENDIF.
get SO item detail
      CLEAR ITAB.
      READ TABLE ITAB WITH KEY VBELN = ITAB1-VBELN
                               POSNR = ITAB1-POSNR BINARY SEARCH.
print sold-to and ship-to customer header info
      AT NEW KUNWE.
        CLEAR KNA1.
        SELECT SINGLE NAME1 FROM KNA1 INTO KNA1-NAME1
          WHERE KUNNR = ITAB1-KUNNR.
        CONCATENATE ITAB-ORT01 ITAB-REGIO INTO ADRS1 SEPARATED BY ', '.
        CONCATENATE ADRS1 ITAB-LAND1 INTO ADRS2 SEPARATED BY '   '.
        CONCATENATE ITAB-NAME1 ADRS2 INTO ADRS3 SEPARATED BY '   '.
        FORMAT COLOR 1 INTENSIFIED OFF.
        WRITE: /1 'Sold-to:', 10 ITAB1-KUNNR, 18 KNA1-NAME1,
          56 'Ship-to:', 65 ITAB1-KUNWE, 73 ADRS3.
        FORMAT RESET.
        SKIP.
      ENDAT.
print out backlog detail
      CLEAR T171T.
      SELECT SINGLE BZTXT FROM T171T INTO T171T-BZTXT
        WHERE SPRAS = SY-LANGU AND BZIRK = ITAB-BZIRK.
      WRITE: /1 ITAB1-VBELN,
        13(6) ITAB1-POSNR NO-ZERO,
        21 ITAB-MATNR,
        41 ITAB-ARKTX,
        83 ITAB1-ZDATE1,
        95 ITAB1-ZDATE3,
        107 ITAB1-ZDATE2,
        119 ITAB-ERNAM,
        129 ITAB-BZIRK, 135 T171T-BZTXT,
        157(20) ITAB-BSTKD,
        179(12) ITAB1-ZQTY1 DECIMALS 0,
        193(12) ITAB1-ZQTY2 DECIMALS 0,
        207(16) ITAB1-ZEXTD DECIMALS 2,
        225 ITAB1-ZDESC.
      AT END OF VBELN.
        SKIP.
      ENDAT.
print footing at ship-to customer
      AT END OF KUNWE.
        SUM.
        ULINE: /193(12), 207(16).
        FORMAT COLOR 1 INTENSIFIED OFF.
        WRITE: /1 'Total: Sold-to:', 18 ITAB1-KUNNR,
          25 '/', 27 'Ship-to:', 36 ITAB1-KUNWE,
          193(12) ITAB1-ZQTY2 DECIMALS 0,
          207(16) ITAB1-ZEXTD DECIMALS 2.
        FORMAT RESET.
        SKIP 2.
      ENDAT.
      AT LAST.
        SUM.
        ULINE: /193(12), 207(16).
        FORMAT COLOR 1 INTENSIFIED ON.
        WRITE: /1 'Report Total:',
          193(12) ITAB1-ZQTY2 DECIMALS 0,
          207(16) ITAB1-ZEXTD DECIMALS 2.
        FORMAT RESET.
      ENDAT.
    ENDLOOP.
ENDFORM.
FORM GET_REQUEST_DATE
subroutine to get request date for SO item
FORM GET_REQUEST_DATE TABLES FTAB STRUCTURE ITAB2B
                      USING CONF_QTY REQ_DATE.
DATA: REMAIN LIKE VBEP-WMENG,                 "qty remaining
      CNTR TYPE I,                            "loop counter
      TAB_INDEX TYPE I.                       "table index
initialize
REMAIN = 0.
REQ_DATE = SPACE.
get first request date from table
TAB_INDEX = 1.
READ TABLE FTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
    REQ_DATE = SPACE.
    EXIT.
ELSE.
    REQ_DATE = FTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = FTAB-WMENG - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
    FTAB-WMENG = REMAIN.
    MODIFY FTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
    DELETE FTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
    CNTR = 0.
    WHILE REMAIN < 0 OR CNTR < 10.
      DELETE FTAB INDEX TAB_INDEX.
      TAB_INDEX = TAB_INDEX + 1.
      READ TABLE FTAB INDEX TAB_INDEX.
      REMAIN = REMAIN + FTAB-WMENG.
      CNTR = CNTR + 1.
    ENDWHILE.
    IF REMAIN = 0.
      DELETE FTAB INDEX TAB_INDEX.
    ELSEIF REMAIN > 0.
      FTAB-WMENG = REMAIN.
      MODIFY FTAB INDEX TAB_INDEX.
    ENDIF.
ENDIF.
ENDFORM.
FORM GET_COMMIT_DATE
subroutine to get commit date for SO item
FORM GET_COMMIT_DATE TABLES CTAB STRUCTURE ITAB2C
                      USING CONF_QTY COM_DATE.
DATA: REMAIN LIKE VBEP-WMENG,                 "qty remaining
      CNTR TYPE I,                            "loop counter
      TAB_INDEX TYPE I.                       "table index
initialize
REMAIN = 0.
COM_DATE = SPACE.
get first commit date from table
TAB_INDEX = 1.
READ TABLE CTAB INDEX TAB_INDEX.
if request date not found, set request date to blank
IF SY-SUBRC <> 0.
    COM_DATE = SPACE.
    EXIT.
ELSE.
    COM_DATE = CTAB-EDATU.
ENDIF.
calculate quantity remaining for request date
REMAIN = CTAB-ROMS1 - CONF_QTY.
if qty remaining > 0, update request date with qty remaining
IF REMAIN > 0.
    CTAB-ROMS1 = REMAIN.
    MODIFY CTAB INDEX TAB_INDEX.
if qty remaining = 0, delete request date (so next request
date will be used for next confirmed qty)
ELSEIF REMAIN = 0.
    DELETE CTAB INDEX TAB_INDEX.
if qty remaining < 0, find next request date and update
ELSE.
    CNTR = 0.
    WHILE REMAIN < 0 OR CNTR < 10.
      DELETE CTAB INDEX TAB_INDEX.
      TAB_INDEX = TAB_INDEX + 1.
      READ TABLE CTAB INDEX TAB_INDEX.
      REMAIN = REMAIN + CTAB-ROMS1.
      CNTR = CNTR + 1.
    ENDWHILE.
    IF REMAIN = 0.
      DELETE CTAB INDEX TAB_INDEX.
    ELSEIF REMAIN > 0.
      CTAB-ROMS1 = REMAIN.
      MODIFY CTAB INDEX TAB_INDEX.
    ENDIF.
ENDIF.
ENDFORM.
END-OF-REPORT.

SAP Code to Return Production Order List for a Given Work Center

We are looking for native SAP code (BAPI, BADI, FM, ...) that would take a work center value as a parameter and then return all the production orders that have been assigned to that work center.
We are running 4.7 and do not have access to BAPI's BAPI_PRODORD_GET_LIST or BAPI_PRODORD_GET_DETAIL.
I believe we could write our own BAPI for this but was hoping that SAP had something natively embedded that we just can't find at this point.
Thanks in advance for any information you might share!!!
Chad

Thanks, Srini
This was very helpful.
We're looking for an SAP object that we can interface into xMII. So the logic in this report is useful but a BAPI, BADI, or RFC would be ideal.
Thanks again,
Chad

Table and Field for Open Order Quantity for a Customer and Material

Hi
I created two sales orders 3 and 5 quantities, and delivered 1 qty in the second order.
when I checked the table VBBE or VA05, I am able to see 3 and 4 qantities open.
but I want to see the total 7 as open order qty, i.e, 3+4=7
because both the orders are placed by the same customer and same material
can u please tell me in which table exactly the total open order quantity for a customer and total open order quantity for a material is stored
Madhu
Edited by: madhubabu rao on Jul 1, 2008 1:49 PM

HI,
U can get the information in VA05 as there are columns like confirmed quantity and order quantty and status. U can use summation button (add upto values) to get required information.
Thx,
Pramod

How to get the back order quantity for sales Order

Hi Friends,
I want to get the back order quantity for sales order . in MD04 t-code,
there is a field(MDEZ-MNG01) for Received Qty/ Required qty. But MDEZ is a structure.
I tried from MDTB table, but the table is not updated with the values in MD04.
Please guide me from which table I can get the back order Qty for sales Order
(ref: t-code MD04, MRP element = CusOrd).
Thanks,
Sagar

>
VIdya Sagar wrote:
> Hi,
>
> Isn't there any difference b/n Open Sales Order and Back order??
Yes Quite Difference.
Read:
http://www.sap-img.com/sap-sd/explain-the-meaning-of-an-open-sales-order.htm
http://help.sap.com/saphelp_sbo2005asp1/helpdata/en/b6/bdb9b2f02842348c9edbe78af863c4/content.htm

How can I get order quantity for a contract

Hi
I can see ordered quantity on a contract screen (VA42/VA43) but would you please tell me in which table or tables this is stored or how I can get ordered quantities against a contract
Regards
Javed

Dear Javed Ihsan
You cann't see the order quantity for contract, you can only see the target quantity for the contract.
However you can even see the order quantity for contract but it will not have any value -(VBAP-KWMENG).
You can only seethe target quantity for a contract-(VBAP-ZMENG).
For the release order you have order quantity( VBAP-KWMENG)
PLease check and revert
Thanks&Regards
Raghu.k

Backflushing only for Production Order Quantity

HI All
I have a situation of positive yield i.e If the Production Order is for 100 BO then at the time of Confirmation we have 105 BO that are actually produced.
We have unlimited over delivery tolerance. Hence we can confirm for 105 BO. But here is what happens.
At the point of confirmation the system proposes an additional line to backflush more quantity for the components then was orginally requested for to produce the 100 BO.
ie, it adds a new line to backflush the needed component quantity for the extra 5 BO of finished goods.
Is there a way we can prevent this in standard SAP. We only want it to backflush for the orginal component quantity needed to produced 100 BO and classify the extra 5 BO as true yield .
Regards
Aju Paul

Dear,
I hope this is the only simple solution, other solution is do the confirmation w.o any component.
Then in MB1a, follow the menu path
Create issue w.r.t order
enter order,
system will prapose the qty as per the component planned qty in order which is nothing but component qty ratio * 100(order qty).
hence you will issue the correct qty of component w,r,t 100 and not 105.
I hope you got the point.

FM or logic to retrieve Open order quantity for below parameter

Hi Gurus,
I have a typical requirement for development of 1 function module and below are the details for it:
I want to have the open order quantity for materials by entering ship-to-party and sales organisation.
Can i get list of all the materials when are open with the quantity of that materials which are yet to be delivered. And I have only ship-to-party and sales organisation as input parameter.
I would prefer if standard function module is available or I would also like to have some code or logic to ful fill the above requirement.
Please reply me fast as I am in urgent requirement of this.
If you are not clear in requirement then please let me know.
Regards,
Sagar

Hi,
I specifically want the Function module and in VA05 i do not getting the actual open order quantity for material.
Eample: If i do partial delivery then VA05 shows the total order quantity and not actual open quantity. So could let me know how I get the above detial.
Regards,
Sagar

Minimum order quantity for sales orders

Hi,
I need to check the configuration settings where the sales orders can be blocked if the ordered quantity is less than that of minimum order quantity.
Pls threw some light on this.
Points assured
Kitty

Dear Krishna
Go To OVAH t code
message class V4 and message no 082
Change from warning to error
The mininum order qty for a material can be set in sales org data 1 tab
If for a material mininum order qty is set to 10 and if an order is placed for anything less than 10 you will get error message straight away
No need of any userexit
With Standard customizing it is possible
This has has been tested by me recently and you too can test it
Regards
Raja

GR quantity more than production order quantity triggering cost difference

Hi Gurus,
We have observed a scenario where the cost(price) dfference account getting hit whenever the GR quantity is greater than the production order total quantity. The dollars posted to this acount are directly propotional to the difference between the GR quantity and the production order quantity.
The total quantity specified in production order is 1 M2U and GR quantity is 1,000 M2U.Material price is $195.65.
Accounting Document;
Inventory account           - 195.65
Offset account                - 200.00
Cost difference account -    4.35
If we do GR for less than or same quantity as in the production order, this account is not getting triggered.
Any idea what is causing this scenario? I really appreciate if you can share with any SAP note related to this.
Thanks,
Mano.

Hello Gurus,
One more observation is,
The palnned costs and actual costs are always different when dealing huge quantities. But the cost difference account is only getting triggered if the actual quantity is more than the palnned quantity.
And,
when the difference between atual quantity and palnned quantity is huge then
Planned costs are booked to the inventory account
Actual costs are booked to the prodcution cost account.
Significant cost variance is booked to the cost variance account.
When the difference between actual quantity is less than/equal to planned quantity is not so huge then
Actual costs are booked to the inventory account
Actual costs are booked to the prodcution cost account.
Is this a standard behaviour?
Thanks,
Mano.

GR quantity less than Production Order quantity

Hello all
I am working at a client where they produce Make-To-Order items specific to a Sales Order by triggering an Assembly Order (Production Order).
Now I am facing a tricky situation & hence want some advice from you guys.
In a generac scenario when an order comes for a MTO material ABC, a Production Order is triggerred for that item.
I can navigate to this Production Order from the Sales Order > Schedule Line tab (Just FYI)
Now once the Production Order is confirmed for each Operation on the floor using CO11N, the material is receipted in the Inventory & the requirement gets fulfilled.
Now sometimes the Production Order is Goods Receipted for a Lesser quantity as compared to the Production Order Quantity.
e.g. Sales Order Quantity = Production Order Quantity = 3 EA & the Delivered Quantity (GR qty) = 1 EA
In such a case, in MD04 the system still shows an open requirement for 2 EA on the same Production Order Number
Is there a way to trigger another Production Order for the remaining quantity automatically ?
If anyone can share their thoughts proposing possible solutions to handle such a scenario, it would be a great help.
I am an SD consultant & hence cant think ways to handle the scenario & propose it to the Business.
Any help will be appreciated
Thanks
Vin

Hello
Thanks for all your replies.
As of now the 1st scenario is no more an issue. The business process is modified to fix the problem.
Now my main problem is the 2nd scenario which I will explain better here.
In our scenario MTO items when placed in a Sales Order triggers a Production Order.
This Production Order needs to be confirmed for each operation & at the final step the MTO item is pushed into the inventory.
The Production BOM & the operation overview for the MTO item is as shown below:
E.g.
Operation Overview:
Operation            Work center                  Control key
0010                    Prod                               PP01
0020                    Pack                               PP01
0070                    Confirm                          PP03
Routing:
Item                Material             QTY        Unit            Operation
0010               ABC                  100         G                0010
0020               XYZ                  10           G                0020
Now as shown above, the business users who produce the MTO item will confirm operation 10 & consume raw material ABC at the Work Center = Prod.
Then at the Work Center = Pack, the packaging material is used & operation 20 is confirmed.
Finally after the packing is done, at the Work center = Confirm, the operation 70 is confirmed when the MTO item is receipted in the Inventory.
Before it is receipted at the Confirm work center, a user monitors the quality of this produced item. If it is good only then it is receipted in the inventory.
Now depending on when the Sales Order is fulfilled, this MTO item will be shipped.
Issue:
Now when the MTO item produced passes thru the high level quality check, it gets receipted in the inventory at operation 70.
However in a case where the some or all the qty of the MTO item ordered doesn't pass the quality check, they will be scrapped physically.
Thus my understanding is that e.g. 3 qty of the MTO was ordered & 1 got rejected, then the user confirming the step 70 will enter YIELD = 2 ea & Scrap = 1 ea and do the final confirmation.
This means that the original demand of 3 ea is still incomplete. 1 Ea still need to be made as a Sales Order Stock.
Now the function needed is that the system should automatically generate a Production order for the remaining 1 Ea as a Sales Order stock.
I dont know if this can be achieved by receipting the 1 EA as REWORK on the CO11n screen at operation 70.
Also I am not sure if Production Order Split case would work in this case.
I would need some input from all the PP gurus. Any solution which be close to what functionality is needed will be greatly appreciated.
Thanks
Vin
Edited by: vinit parkar on Mar 3, 2010 5:04 PM

Report including open purchase order quantity for one storage location

Hello gurus,
I am looking for a report giving me the total/available stock and the open purchase order quantity for all materials stored in a certain storage location.
I.e. like this:
Plant 0001, storage loc. 01
Material stock open purchase order quantity
100000 200 pcs. 50pcs.
Is there such a report in SAP standard?
Thanks
Alicia

hI
U want the report like this ,
MAterial stock availablein storage location and with Open PO quantity for the same material.???
This report u can get in 2 different transaction . the n u can combine and create one custom transaction .
One is for materil stock in storage location is MB52 or MB5B
THen ME2N for open PO quantity for that material.

Open Order Quantity for open sales orders

Is there a standard SAP Report that gives the open order quantity for every open sales order. "Open" is defined as any order quantity that has not shipped. Delivery creation is not the same as shipment. VA05 Report does not contain enough information to calculate the open order quantity for an ERP-based backlog report.

Try VA05 schedule lines standar variant...include status fields and both ordered qty and confirmed qty. In SAP standard system order status, status A means open orders fully (Nothing shipped, everything opened). Status B means in process orders (Partially processed - shipped). Status C means complete orders (Nothing opened). As there is no delivered qty in VA05, you need to download to excel the file and calculate the difference between both qty fields for each A and B status. That is a way to get the missing qty to be delivered or open qty as you stated.
Hope it helps.
Jorge Fernandez

ABAP Code to get Production Order Quantity for a material-Status REL,CRTD

Similar Messages

Maybe you are looking for