ABAP COMPILATION ERROR

Hi,
I am running the following code in abap editor
DATA:     LEN TYPE I VALUE 10,
     POS TYPE I VALUE 11,
     TEXT(10) VALUE ‘1234567890’
WRITE AT POS (LEN) TEXT .
Following error i am getting when i compile
Field "1234567890" is unknown. It is neithere in on of the specified tables nor defined by a DATA statement.
Could you please let me know the solution.
Thanks,
RamuV

There appear to be some garbage characters in this line and your WRITE is incorrect. Cut and paste this:
DATA: len TYPE i VALUE 10,
      pos TYPE i VALUE 11,
      text(10) VALUE '1234567890'.
WRITE AT pos(len) text .
Rob

Similar Messages

  • ABAP RunTime Error  for tcode : TS01

    Hi Friends,
    Actually we are getting the run time error while creating the standard security transaction using TS01.
    After entering the data in the first screen -- click on the enter -- enter the details inside & click on save button--then it will go run time error.
    Here while calling the method, we are getting the run time error.
    call method cl_class_position_op_trs=>trs_flows_calculate_tax
          exporting
            im_tab_flow         = L_TAB_FLOWS
            im_company_code     = l_company_code
            im_security_account = l_security_account
            im_security_id      = l_security_id
          receiving
            re_tab_flow         = RE_TAB_FLOWS
          exceptions
            failed = 1
            others = 2.
      if sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                  WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4
                  RAISING FAILED.
      endif.
    Actuallly here the problem with the class becuase the class  cl_class_position_op_trs itself has error.
    In the class , in the local classes they are calling again the class cl_class_position_op_trs. becasue of this reason it was going to run time error.
    So we are getting the run time error.
    We have OSS note for the same problem.But i am unable to implement that.
    Please guide me how to implement the OSS note 751947.(Note 751947 - TRS: Syntax error due to ABAP Compiler)
    please find the error details:
    Runtime Errors         SYNTAX_ERROR
           Occurred on     03/12/2008 at 00:26:57
    Syntax error in program "CL_CLASS_POSITION_OP_TRS======CP ".
    What happened?
    The following syntax error occurred in the program
    CL_CLASS_POSITION_OP_TRS======CP :
    "Components of classes declared using "CLASS CL_CLASS_POSITION_OP_TRS D"
    Error in ABAP application program.
    The current ABAP program "CL_CLASS_POSITION_TRS=========CP" had to be
    terminated because one of the
    statements could not be executed.
    This is probably due to an error in the ABAP program.
    What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "CL_CLASS_POSITION_OP_TRS======CP
    You can also perform the syntax check from the ABAP/4 Editor.
    If the problem persists, proceed as follows:
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion date.
    Error analysis
    The following syntax error was found in the program
    CL_CLASS_POSITION_OP_TRS======CP :
    "Components of classes declared using "CLASS CL_CLASS_POSITION_OP_TRS D"
    Regards.
    Lakshmi
    Edited by: lakshmi podile on Mar 14, 2008 8:08 AM

    Did you go through the steps in the note?
    Use transaction SE24 to distribute the local classes into new include structures as follows:
    Call transaction SE24 for the class CL_CLASS_POSITION_OP_TRS.
    Select the following menu option:
    Goto --> Class-local types --> Local Class Definitions/Types
    Confirm the message that proposes conversion into the new structures.
    Choose Utilities --> Regenerate sections from the menu.
    Activate the class and all changed objects.
    Try and do this, and see what happens.
    Good luck.

  • Compilation error while calling static method from another class

    Hi,
    I am new to Java Programming. I have written two class files Dummy1 and Dummy2.java in the same package Test.
    In Dummy1.java I have declared a static final variable and a static method as you can see it below.
    package Test;
    import java.io.*;
    public class Dummy1
    public static final int var1= 10;
    public static int varDisp(int var2)
    return(var1+var2);
    This is program is compiling fine.
    I have called the static method varDisp from the class Dummy2 and it is as follows
    package Test;
    import java.io.*;
    public class Dummy2
    public int var3=15;
    public int test=0;
    test+=Dummy1.varDisp(var3);
    and when i compile Dummy2.java, there is a compilation error <identifier > expected.
    Please help me in this program.

    public class Dummy2
    public int var3=15;
    public int test=0;
    test+=Dummy1.varDisp(var3);
    }test+=Dummy1.varDisplay(var3);
    must be in a method, it cannot just be out somewhere in the class!

  • ABAP Runtime Error while executing planning folder

    Hi experts.
    We have a situation where I can access our planning folders but that's not the case for one of our user. She encountered with an ABAP Runtime Error as follow:
    Appreciate if anyone can help me out with this.
    Runtime Error          RAISE_EXCEPTION
    Date and Time          20.04.2007 16:50:23
    ShrtText
    Exception condition "X_MESSAGE" raised.
    What happened?
    The current ABAP/4 program encountered an unexpected
    situation.
    What can you do?
    Print out the error message (using the "Print" function)
    and make a note of the actions and input that caused the
    error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
    is especially useful if you want to keep a particular message.
    Error analysis
    A RAISE statement in the program "SAPLRSSBR" raised the exception
    condition "X_MESSAGE".
    Since the exception was not intercepted by a superior program
    in the hierarchy, processing was terminated.
    Short description of exception condition:
    Cancel
    For detailed documentation of the exception condition, use
    Transaction SE37 (Function Library). You can take the called
    function module from the display of active calls.
    How to correct the error
    You may able to find an interim solution to the problem
    in the SAP note system. If you have access to the note system yourself,
    use the following search criteria:
    "RAISE_EXCEPTION" C
    "SAPLRSSBR" or "LRSSBRU03"
    "RSSB_AUTHORITY_IOBJVL_CHECK"
    or
    "SAPLRSSBR" "X_MESSAGE"
    or
    "UPB_PM_CUST_START " "X_MESSAGE"
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
    To obtain this, select in the current display "System->List->
    Save->Local File (unconverted)".
    2. A suitable printout of the system log
    To obtain this, call the system log through transaction SM21.
    Limit the time interval to 10 minutes before and 5 minutes
    after the short dump. In the display, then select the function
    "System->List->Save->Local File (unconverted)".
    3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, select the Editor function "Further Utilities->
    Upload/Download->Download".
    4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
    System environment
    SAP Release.............. "640"
    Application server....... "S53KJ165"
    Network address.......... "10.1.53.165"
    Operating system......... "AIX"
    Release.................. "5.3"
    Hardware type............ "00C3A11F4C00"
    Character length......... 8 Bits
    Pointer length........... 64 Bits
    Work process number...... 3
    Short dump setting....... "full"
    Database server.......... "S53KJ170"
    Database type............ "ORACLE"
    Database name............ "BWP"
    Database owner........... "SAPBWP"
    Character set............ "en_US.ISO8859-1"
    SAP kernel............... "640"
    Created on............... "Oct 29 2006 20:42:11"
    Created in............... "AIX 1 5 00538A4A4C00"
    Database version......... "OCI_920 "
    Patch level.............. "155"
    Patch text............... " "
    Supported environment....
    Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
    10.2.0.."
    SAP database version..... "640"
    Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5"
    Memory usage.............
    Roll..................... 16128
    EM....................... 16759712
    Heap..................... 0
    Page..................... 57344
    MM Used.................. 10079624
    MM Free.................. 2487240
    SAP Release.............. "640"
    User and Transaction
    Client.............. 350
    User................ "S51643"
    Language key........ "E"
    Transaction......... "UPSPL "
    Program............. "SAPLRSSBR"
    Screen.............. "SAPLUPB_PM_ALV 1000"
    Screen line......... 2
    Information on where terminated
    The termination occurred in the ABAP program "SAPLRSSBR" in
    "RSSB_AUTHORITY_IOBJVL_CHECK".
    The main program was "UPB_PM_CUST_START ".
    The termination occurred in line 416 of the source code of the (Include)
    program "LRSSBRU03"
    of the source code of program "LRSSBRU03" (when calling the editor 4160).
    Source Code Extract
    Line
    SourceCde
    386
    l_s_range-low  = l_activity.
    387
    APPEND l_s_range TO l_sx_auth_check_detail-range.
    388
    INSERT l_sx_auth_check_detail INTO TABLE <l_sx_auth_check>-auth_check_detail.
    389
    390
    CALL FUNCTION 'RSSB_AUTHORITY_IOBJVL_REDUCED'
    391
    EXPORTING
    392
    i_infocube              = g_sx_iobjvl_check-infocube
    393
    i_uname                 = l_uname
    394
    i_th_hierarchy          = g_sx_iobjvl_check-hierarchy
    395
    i_message               = i_message
    396
    i_activity_force_check  = i_activity_force_check
    397
    CHANGING
    398
    c_tsx_auth_check_detail = <l_sx_auth_check>-auth_check_detail
    399
    c_tx_no_auth            = l_tx_no_auth
    400
    c_ts_auth_tlevel        = e_ts_auth_tlevel
    401
    EXCEPTIONS
    402
    user_not_authorized     = 1
    403
    auth_check_failure      = 2
    404
    auth_check_error        = 3
    405
    inherited_error         = 4
    406
    x_message               = 5.
    407
    IF sy-subrc = 0.
    408
    REFRESH l_tx_no_auth.
    409
      CR 20050826 HW873685 SP29 Part 2/3 begin
    410
      SY-SUBRC = 2 means Auth-Obj missing in users profiles, we need this later
    411
    ELSEIF sy-subrc = 2.
    412
    ao_missing = rs_c_true.
    413
    e_subrc = 2.
    414
      CR 20050826 HW873685 SP29 Part 2/3 end
    415
    ELSEIF sy-subrc = 5.
    >>>>>
    RAISE x_message.
    417
    ELSE.
    418
    e_subrc = 2.
    419
    ENDIF.
    420
    421
      correct the kid now
    422
    LOOP AT l_tx_no_auth INTO l_sx_no_auth.
    423
    l_sx_no_auth-kid = <l_sx_auth_check>-kid.
    424
    APPEND l_sx_no_auth TO  e_tx_no_auth.
    425
    ENDLOOP.
    426
    427
    ENDLOOP.
    428
    429
    End LOOP: Check all SUBNR (FEMS)
    430
    431
    432
    CR 20050826 HW873685 SP29 Part 3/3 begin
    433
    If an Auth-Obj. is missing, no SUBNR can be authorized. Due to OLAP-logic
    434
    this means empty no_auth table
    435
    IF ao_missing = rs_c_true.
    Contents of system fields
    Name
    Val.
    SY-SUBRC
    5
    SY-INDEX
    1
    SY-TABIX
    0
    SY-DBCNT
    0
    SY-FDPOS
    1
    SY-LSIND
    0
    SY-PAGNO
    0
    SY-LINNO
    1
    SY-COLNO
    1
    SY-PFKEY
    210
    SY-UCOMM
    SELECT
    SY-TITLE
    Execute All Cost Element
    SY-MSGTY
    E
    SY-MSGID
    R7
    SY-MSGNO
    057
    SY-MSGV1
    0CO_AREA
    SY-MSGV2
    A
    SY-MSGV3
    SY-MSGV4
    Active Calls/Events
    No.   Ty.          Program                             Include                             Line
    Name
    40 FUNCTION     SAPLRSSBR                           LRSSBRU03                             416
    RSSB_AUTHORITY_IOBJVL_CHECK
    39 FORM         SAPLRSDRC                           LRSDRCF15                             113
    AUTHORITY_CHECK
    38 FORM         SAPLRSDRC                           LRSDRCF27                              57
    BASIC_QUERY_DATA_GET_ROLAP
    37 FUNCTION     SAPLRSDRC                           LRSDRCU05                              44
    RSDRC_BASIC_QUERY_DATA_GET
    36 FUNCTION     SAPLRSDRC                           LRSDRCU15                             189
    RSDRC_BASIC_CUBE_DATA_GET
    35 FORM         SAPLRSDRC                           LRSDRCF25                             373
    DATA_GET
    34 FUNCTION     SAPLRSDRC                           LRSDRCU02                             249
    RSDRC_CUBE_DATA_GET
    33 FUNCTION     SAPLRSDRI                           LRSDRIU01                             352
    RSDRI_INFOPROV_READ
    32 FORM         /1SEM/UPCBW_350TMWPA01              UPC_BWINTERFC__FIX                    174
    DATA_READ
    31 FUNCTION     SAPLUPCBW                           LUPCBWU06                              56
    UPC_BW_DATA_READ
    30 FUNCTION     SAPLUPC1                            LUPC1U06                               67
    UPC_DATA_READ
    29 METHOD       /1SEM/CL_DATA_350TMWPA01======CP    UPC_DATA_READ_DB                       25
    /1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA_INTERNAL~READ_DB
    28 METHOD       /1SEM/CL_BUFFER_350TMWPA01====CP    UPC_BUFFER_GET                        167
    /1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~GET
    27 METHOD       /1SEM/CL_BUFFER_350TMWPA01====CP    UPC_BUFFER_READ                         5
    /1SEM/CL_BUFFER_350TMWPA01=>IF_SEM_BUFFER~READ
    26 METHOD       /1SEM/CL_DATA_350TMWPA01======CP    UPC_DATA_READ                          46
    /1SEM/CL_DATA_350TMWPA01=>IF_SEM_DATA~READ
    25 FORM         45AJEHYBGH37F61DTX80Q9ZFP           UPP_PLAN                              395
    READ_TRANSACTION_DATA
    24 FORM         45AJEHYBGH37F61DTX80Q9ZFP           UPP_PLAN                              561
    GET_DATA
    23 FORM         45AJEHYBGH37F61DTX80Q9ZFP           UPP_PLAN                              800
    EC500_SELECT_DATABASE
    22 FORM         SAPLUPP_PP_KERNEL                   LUPP_PP_KERNELF97                     575
    SELECT_DATABASE
    21 FORM         SAPLUPP_PP_KERNEL                   LUPP_PP_KERNELF97                     464
    SELECT_AND_FIND_HEADER_COMBI
    20 FORM         SAPLUPP_PP_KERNEL                   LUPP_PP_KERNELF97                     217
    LOGICAL_SCREEN_FILL_HEADER
    19 FORM         SAPLUPP_PP_KERNEL                   LUPP_PP_KERNELF97                      60
    LOGICAL_SCREEN_FILL
    18 FUNCTION     SAPLUPP_PP_KERNEL                   LUPP_PP_KERNELU01                     114
    UPP_PP_KERNEL_CONSTRUCTOR
    17 METHOD       CL_UPB_PL_ALV=================CP    CL_UPB_PL_ALV=================CM01E   176
    CL_UPB_PL_ALV=>CONSTRUCTOR
    16 FORM         SAPLUPB_PM_ALV                      LUPB_PM_ALVF01                        623
    OUTPUT_CREATE
    15 FORM         SAPLUPB_PM_ALV                      LUPB_PM_ALVF01                        202
    OUTPUT_INIT
    14 FORM         SAPLUPB_PM_ALV                      LUPB_PM_ALVF01                       1062
    OUTPUT_PROCESS
    13 FORM         SAPLUPB_PM_ALV                      LUPB_PM_ALVF01                       1225
    OUTPUT_SWITCH_TO_LAYOUT
    12 FORM         SAPLUPB_PM_ALV                      LUPB_PM_ALVF05                        748
    INIT_CONTROLS
    11 MODULE (PBO) SAPLUPB_PM_ALV                      LUPB_PM_ALVO01                         13
    STATUS
    10 FUNCTION     SAPLUPB_PM_ALV                      LUPB_PM_ALVU01                         24
    UPB_PM_ALV_START
    9 METHOD       CL_UPB_PM_APPLC===============CP    CL_UPB_PM_APPLC===============CM00A    88
    CL_UPB_PM_APPLC=>EXECUTE_PM
    8 METHOD       CL_UPB_PM_ADMIN===============CP    CL_UPB_PM_ADMIN===============CM00L    76
    CL_UPB_PM_ADMIN=>PAI_ONE_NODE
    7 METHOD       CL_UPB_PM_ADMIN===============CP    CL_UPB_PM_ADMIN===============CM00L    23
    CL_UPB_PM_ADMIN=>PAI_ONE_NODE
    6 METHOD       CL_UPB_PM_ADMIN===============CP    CL_UPB_PM_ADMIN===============CM003   121
    CL_UPB_PM_ADMIN=>PAI
    5 FORM         SAPLUPB_PM                          LUPB_PMF04                             80
    USER_COMMAND_0210
    4 MODULE (PAI) SAPLUPB_PM                          LUPB_PMI04                             11
    USER_COMMAND_0210
    3 FUNCTION     SAPLUPB_PM                          LUPB_PMU22                             86
    UPB_PM_MAIN
    2 FORM         UPB_PM_CUST_START                   UPB_PM_START_ADMIN                    251
    PM_START
    1 EVENT        UPB_PM_CUST_START                   UPB_PM_START_ADMIN                     14
    START-OF-SELECTION
    Chosen variables
    Name
    Val.
    No.      40 Ty.          FUNCTION
    Name  RSSB_AUTHORITY_IOBJVL_CHECK
    I_ACTIVITY
    03
    33
    03
    I_ACTIVITY_FORCE_CHECK
    2
    0
    I_MESSAGE
    X
    5
    8
    I_SX_IOBJVL_CHECK
    ZCTMWMA05                                                                                ####
    5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
    A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    I_UNAME
    S51643
    533333222222
    351643000000
    E_SUBRC
    0
    0000
    0000
    E_TS_AUTH_TLEVEL
    Table[initial]
    E_TX_NO_AUTH
    Table[initial]
    RSSB_C_AUTH_KEYFIGURE
    1KYFNM
    3454442222
    1B96ED0000
    SY-REPID
    SAPLRSSBR
    5454555452222222222222222222222222222222
    310C233220000000000000000000000000000000
    SYST-REPID
    SAPLRSSBR
    5454555452222222222222222222222222222222
    310C233220000000000000000000000000000000
    %_SPACE
    2
    0
    RS_C_RANGE_SIGN
    IE
    44
    95
    SY-SUBRC
    5
    0000
    0005
    L_TX_NO_AUTH
    Table[initial]
    SY-XFORM
    CONVERSION_EXIT
    444545544454545222222222222222
    3FE65239FEF5894000000000000000
    SYST
    0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1. ###################################################à##############
    0000000000000000000000000002000000000000000000000000000000000000000000000000000E00000000000000
    0001000000000000000000000000000000000000000000010001000000010000000000000000000000000000000000
    L_SX_NO_AUTH
    ############ÿÿÿÿ
    000000000000FFFF
    000000000000FFFF
    L_SX_NO_AUTH-KID
    Table[initial]
    <L_SX_AUTH_CHECK>-KID
    Table IT_33029[1x4]
    FUNCTION-POOL=RSSBRDATA=G_SX_IOBJVL_CHECK-AUTH_CHECK[1]-KID
    Table reference: 2052
    TABH+  0(20) = 07000000908D2FD0000000000000000000000000
    TABH+ 20(20) = 00000804000081050000000100000004FFFFFFFF
    TABH+ 40(16) = 040002F1000003480001432821000000
    store        = 0x07000000908D2FD0
    ext1         = 0x0000000000000000
    shmId        = 0     (0x00000000)
    id           = 2052  (0x00000804)
    label        = 33029 (0x00008105)
    fill         = 1     (0x00000001)
    leng         = 4     (0x00000004)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000003
    occu         = 1     (0x00000001)
    access       = 2     (ItAccessSorted)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 1     (ItUnique)
    keyKind      = 2     (table_line)
    cmpMode      = 5     (cmpSingle)
    occu0        = 0
    collHash     = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 1
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x07000000908E0CC8
    pghook       = 0x0000000000000000
    idxPtr       = 0x0000000000000000
    refCount     = 1     (0x00000001)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 1     (0x00000001)
    lineAlloc    = 1     (0x00000001)
    store_id     = 6998  (0x00001B56)
    shmIsReadOnly = 0     (0x00000000)
    >>>>> 1st level extension part <<<<<
    regHook      = Not allocated
    hsdir        = Not allocated
    ext2         = Not allocated
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    No.      39 Ty.          FORM
    Name  AUTHORITY_CHECK
    I_TH_SFC
    Table IT_32090[14x128]
    FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFC
    Table reference: 1757
    TABH+  0(20) = 070000009052D8F8070000009081372800000000
    TABH+ 20(20) = 000006DD00007D5A0000000E00000080FFFFFFFF
    TABH+ 40(16) = 040002DB000017C80010839401000000
    store        = 0x070000009052D8F8
    ext1         = 0x0700000090813728
    shmId        = 0     (0x00000000)
    id           = 1757  (0x000006DD)
    label        = 32090 (0x00007D5A)
    fill         = 14    (0x0000000E)
    leng         = 128   (0x00000080)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000099
    occu         = 16    (0x00000010)
    access       = 4     (ItAccessHashed)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 1     (ItUnique)
    keyKind      = 3     (user defined)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 1
    collHash     = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x0700000090811F18
    pghook       = 0x0000000000000000
    idxPtr       = 0x070000009052D950
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x00000010)
    lineAlloc    = 16    (0x00000010)
    store_id     = 6872  (0x00001AD8)
    shmIsReadOnly = 0     (0x00000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x0700000090813588
    hsdir        = 0x0000000000000000
    ext2         = 0x0000000000000000
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    CL_RSO_REPOSITORY=>P_C_BAL_LOG_SUBOBJEC_INST
    SY-REPID
    SAPLRSDRC
    5454554542222222222222222222222222222222
    310C234230000000000000000000000000000000
    L_S_RANGE-LOW
    1ROWCOUNT
    354544545222222222222222222222222222222222222222222222222222
    12F73F5E4000000000000000000000000000000000000000000000000000
    <L_S_SFK>-KYFNM
    1ROWCOUNT
    354544545222222222222222222222
    12F73F5E4000000000000000000000
    RSDRC_C_QUERYMODE-CUMULATIVE
    C
    4
    3
    S_S_COB_PRO
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    L_SX_SELDR-RANGE+8(8)
    Table IT_32110[2x136]
    FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_SX_SELDR
    Table reference: 1902
    TABH+  0(20) = 0700000090813D10000000000000000000000000
    TABH+ 20(20) = 0000076E00007D6E0000000200000088FFFFFFFF
    TABH+ 40(16) = 040002DB00001AA00010254421000000
    store        = 0x0700000090813D10
    ext1         = 0x0000000000000000
    shmId        = 0     (0x00000000)
    id           = 1902  (0x0000076E)
    label        = 32110 (0x00007D6E)
    fill         = 2     (0x00000002)
    leng         = 136   (0x00000088)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000112
    occu         = 16    (0x00000010)
    access       = 1     (ItAccessStandard)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 2     (ItUniqueNon)
    keyKind      = 2     (table_line)
    cmpMode      = 8     (cmpManyEq)
    occu0        = 1
    collHash     = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 1
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x07000000908800F8
    pghook       = 0x0000000000000000
    idxPtr       = 0x0000000000000000
    refCount     = 1     (0x00000001)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x00000010)
    lineAlloc    = 16    (0x00000010)
    store_id     = 6876  (0x00001ADC)
    shmIsReadOnly = 0     (0x00000000)
    >>>>> 1st level extension part <<<<<
    regHook      = Not allocated
    hsdir        = Not allocated
    ext2         = Not allocated
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    L_S_RANGE
    IEQ1ROWCOUNT
    4453545445452222222222222222222222222222222222222222222222222222222222222222222222222222222222
    95112F73F5E40000000000000000000000000000000000000000000000000000000000000000000000000000000000
    L_TSX_SELDR
    Table IT_32094[13x120]
    FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TSX_SELDR
    Table reference: 1870
    TABH+  0(20) = 0700000090813AE007000000908DF36800000000
    TABH+ 20(20) = 0000074E00007D5E0000000D00000078FFFFFFFF
    TABH+ 40(16) = 040002DB000018A8000C4B9C01000000
    store        = 0x0700000090813AE0
    ext1         = 0x07000000908DF368
    shmId        = 0     (0x00000000)
    id           = 1870  (0x0000074E)
    label        = 32094 (0x00007D5E)
    fill         = 13    (0x0000000D)
    leng         = 120   (0x00000078)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000103
    occu         = 12    (0x0000000C)
    access       = 2     (ItAccessSorted)
    idxKind      = 1     (ItIndexLinear)
    uniKind      = 1     (ItUnique)
    keyKind      = 3     (user defined)
    cmpMode      = 3     (cmpSingleMcmpU)
    occu0        = 1
    collHash     = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x070000009087FB40
    pghook       = 0x0700000090813D68
    idxPtr       = 0x0700000090813DA0
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 36    (0x00000024)
    lineAlloc    = 36    (0x00000024)
    store_id     = 6875  (0x00001ADB)
    shmIsReadOnly = 0     (0x00000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x07000000908DED00
    hsdir        = 0x0000000000000000
    ext2         = 0x0000000000000000
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    L_SX_SELDR
    00001KYFNM                          ########300   0     ####ÿÿÿÿ####  0 ########        ####ÿÿ
    333334544422222222222222222222222222000000003332223222220000FFFF0000223200000000222222220000FF
    00001B96ED00000000000000000000000000000000003000000000000000FFFF0000000000000000000000000000FF
    G_RUNNING
    0
    0000
    0000
    L_BASICCUBE
    ZCTMWMA05
    545454433222222222222222222222
    A34D7D105000000000000000000000
    L_TH_FREE
    Table IT_32093[6x30]
    FUNCTION-POOL=RSDRCFORM=AUTHORITY_CHECKDATA=L_TH_FREE
    Table reference: 1763
    TABH+  0(20) = 0700000090813760000000000000000000000000
    TABH+ 20(20) = 000006E300007D5D000000060000001EFFFFFFFF
    TABH+ 40(16) = 040002DB00001B800010831401000000
    store        = 0x0700000090813760
    ext1         = 0x0000000000000000
    shmId        = 0     (0x00000000)
    id           = 1763  (0x000006E3)
    label        = 32093 (0x00007D5D)
    fill         = 6     (0x00000006)
    leng         = 30    (0x0000001E)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000116
    occu         = 16    (0x00000010)
    access       = 4     (ItAccessHashed)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 1     (ItUnique)
    keyKind      = 2     (table_line)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 1
    collHash     = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 0
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x07000000908137B8
    pghook       = 0x0000000000000000
    idxPtr       = 0x07000000908139B0
    refCount     = 0     (0x00000000)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x00000010)
    lineAlloc    = 16    (0x00000010)
    store_id     = 6874  (0x00001ADA)
    shmIsReadOnly = 0     (0x00000000)
    >>>>> 1st level extension part <<<<<
    regHook      = Not allocated
    hsdir        = Not allocated
    ext2         = Not allocated
    >>>>> 2nd level extension part <<<<<
    tabhBack     = Not allocated
    delta_head   = Not allocated
    pb_func      = Not allocated
    pb_handle    = Not allocated
    SYST-REPID
    SAPLRSDRC
    5454554542222222222222222222222222222222
    310C234230000000000000000000000000000000
    L_SX_IOBJVL_CHECK
    ZCTMWMA05                                                                                ####
    5454544332222222222222222222222222222222222222222222222222222222222222222222222222222222220000
    A34D7D1050000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    L_ACTIVITY
    03
    33
    03
    SY-UNAME
    S51643
    533333222222
    351643000000
    S_MULTICUBE
    222222222222222222222222222222
    000000000000000000000000000000
    E_SUBRC
    0
    0000
    0000
    %_VIASELSCR
    0
    4
    S_CHANM
    222222222222222222222222222222
    000000000000000000000000000000
    I_RAISE_EXCEPTION
    X
    5
    8
    RS_C_TRUE
    X
    5
    8
    SCREEN
    2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
    0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    No.      38 Ty.          FORM
    Name  BASIC_QUERY_DATA_GET_ROLAP
    E_T_DATA
    Table[initial]
    E_END_OF_DATA
    2
    0
    C_FIRST_CALL
    X
    5
    8
    S_S_QPARAM
    XX 0 ##ÿÿÿÿ####DB-VIEW                                               R ###dABAP-TABLE
    25523200FFFF0000442544522222222222222222222222222222222222222222222222520006444525444422222222
    08800000FFFF000042D6957000000000000000000000000000000000000000000000002000041210D412C500000000
    C_S_QPARAM-AUTHORITY_CHECK
    R
    5
    2
    RSDRC_C_AUTHCHK-NONE
    2
    0
    RSJOBINFO
    00000000000000                                  ####
    222222222222222222222222222222223333333333333322222222222222222222222222222222220000
    000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    RSD_C_DPANM
    0REQUID                       0CHNGID                       0RECORDTP                     0IOB
    3545544222222222222222222222223444444222222222222222222222223544454552222222222222222222223444
    025159400000000000000000000000038E794000000000000000000000000253F244000000000000000000000009F2
    SPACE
    2
    0
    I_BASICCUBE
    ZCTMWMA05
    545454433222222222222222222222
    A34D7D105000000000000000000000
    I_TH_SFC
    Table IT_32090[14x128]
    I_TH_SFK
    Table IT_32091[2x128]
    FUNCTION=RSDRC_BASIC_CUBE_DATA_GETDATA=L_TH_SFK
    Table reference: 1767
    TABH+  0(20) = 0700000090887AC00700000090813CD800000000
    TABH+ 20(20) = 000006E700007D5B0000000200000080FFFFFFFF
    TABH+ 40(16) = 040002DB000018380010839421000000
    store        = 0x0700000090887AC0
    ext1         = 0x0700000090813CD8
    shmId        = 0     (0x00000000)
    id           = 1767  (0x000006E7)
    label        = 32091 (0x00007D5B)
    fill         = 2     (0x00000002)
    leng         = 128   (0x00000080)
    loop         = -1    (0xFFFFFFFF)
    xtyp         = TYPE#000101
    occu         = 16    (0x00000010)
    access       = 4     (ItAccessHashed)
    idxKind      = 0     (ItIndexNone)
    uniKind      = 1     (ItUnique)
    keyKind      = 3     (user defined)
    cmpMode      = 2     (cmpSingleMcmpR)
    occu0        = 1
    collHash     = 0
    groupCntl    = 0
    rfc          = 0
    unShareable  = 0
    mightBeShared = 1
    sharedWithShmTab = 0
    isShmLockId  = 0
    gcKind       = 0
    isUsed       = 1
    >>>>> Shareable Table Header Data <<<<<
    tabi         = 0x0700000090884C90
    pghook       = 0x0000000000000000
    idxPtr       = 0x0700000090827A98
    refCount     = 1     (0x00000001)
    tstRefCount  = 0     (0x00000000)
    lineAdmin    = 16    (0x00000010)
    lineAlloc    = 16    (0x00000010)
    store_id     = 6857  (0x00001AC9)
    shmIsReadOnly = 0     (0x00000000)
    >>>>> 1st level extension part <<<<<
    regHook      = 0x0700000090813B38
    hsdir        = 0x0000000000000000

    Have you check or trace Authorization??
    In DUMP:
    Information on where terminated
    The termination occurred in the ABAP program "SAPLRSSBR" in
    "RSSB_AUTHORITY_IOBJVL_CHECK".
    The main program was "UPB_PM_CUST_START ".

  • ABAP Runtime error while activating Update rules.

    Hi Gurus,
    Actually we are in NW 2004's SP9.
    While activating the update rules of cube "0PY_PPC01" it is going to ABAP runtime error. It is giving the key words like "MESSAGE_TYPE_X"
    "%_T005K2" or "INSTANTIATE". And i apply NOTEs also i am unable to fix it.
    Can any one give  correct NOTE number that can fix it or any suggestions.
    Thanks in advance.
    Thanks
    Raju.k

    Hi Sven,
    Now we are also in SP11, But the thing is all the other UR are working fine Except
    this UR. Even there is no perticular NOTE number for this.
    Thanks
    Raju.k

  • ABAP Runtime error in FM BBP_VENDOR_GET_DATA2  in R/3

    Hi Gurus
    We are receiving nearly 1000 ABAP runtime error in the Functional Module BBP_VENDOR_GET_DATA2  in the user ID as RFCPROD in the ST22 and in the dump details as soon below.
       Possible error causes:
        o The maximum size of an SQL statement was exceeded.
        o The statement contains too many input variables.
        o The input data requires more space than is available.
    And this is happening in this place.
    48|            IF NOT LRT_ADDRNR[] IS INITIAL.                                                           |
    |>>>>>|    SELECT * APPENDING TABLE ITAB_ADRC FROM ADRC .
    We enter the T-code XK01, XK02 and XK03 , then enter the details of vendor , press enter immediately one count is increasing in the ST22.
    Please any one can suggest .
    Thanks & Regards
    Sada

    Hi Sadasivam Soliyappan,
    Could you please share the SAP Note number with us urgently?
    We have been encountered with the same problem unfortunately.
    Thanks in advance.
    Dolunay.

  • Abap runtime error CL_AI_CRM_OBJECT_LMDB============CP

    Dear All,
    We are setting up Solman 7.1 sp08 for VAR scenario.
    As we faced some issues with duplicated ibase components SAP suggested us to implement note 2012029.
    After following step by step and running the reporrts mentioned in above note like report AI_CRM_PRODUCT_DELETE we started getting an abap runtime error.
    SAP is telling us to re implement the note but it does not resolve our issue.
    Now we are unable to create incidents, or to run trx ib_gen.
    Because of this, job refresh_admin_data_from_support is getting cancelled.
    find attached screenshot showing dump.
    all suggestions or comments are welcome!
    regards,
    German

    Hi German,
    Looks like your report CL_AI_CRM_OBJECT_LMDB============CP is corrupted. Can you try restoring this program to original version by going to Version management in SE38?
    Regards,
    Vivek

  • Compile Error: "schema 'name' does not exist

    Im trying to build a program that quereys a table in a database but i keep getting this error. Am i missing a link between the files or am i missing a line of code in my program??

    Apologies. I receive a compiler error which reads as follows;
    java.lang.ClassNotFoundException: org.apache.derby.jdbc.EmbeddedDriver
    java.sql.SQLSyntaxErrorException: Schema 'DEMO' does not exist
    Heres the main body of code i am trying to execute.
    public class Main {
    * @param args the command line arguments
    public static void main(String[] args) {
    // TODO code application logic here
    try{
    Class.forName("org.apache.derby.jdbc.EmbeddedDriver");
    }catch(ClassNotFoundException e){
    System.out.println(e);
    try{
    Connection con = DriverManager.getConnection("jdbc:derby://localhost:1527/SimpleDBDemo", "demo", "demo");
    Statement stmt = con.createStatement();
    ResultSet rs = stmt.executeQuery("SELECT * FROM DEMO.Table1");
    while (rs.next()) {
    String s = rs.getString("Name");
    float n = rs.getFloat("Age");
    System.out.println(s + " " + n);
    }catch(SQLException e){
    System.err.println(e);
    I am using NetBeans IDE and have created a database under: Services->Databases-> Java DB->SimpleDBDemo.
    I have a database connection in which theres a simple table (called "TABLE1") created which contains the names and ages of two people.
    Hope this makes the problem a bit clearer.
    Any help would be greatly appreciated.

  • Experiencing "The type or namespace name 'DirectoryServices' does not exist in the namespace 'System' (are you missing an assembly reference?)" compilation error

    I am just starting to implement a new user login authentication process wherein after prompting user for username & password, I hope to authenticate them againts our company Active Directory user data. Since I am just starting, I only have very few things
    done at this point which is how I wanted to work on this so that my development environment is still at its simplest state.
    I am using the following for development:
    MS-Visual Studios Professional 2013 Version 12.0.30501.00 Update 2, and
    MS .NET Framework Version 4.5.50938.
    Here are my project solution's current items:
    Web.config:
    <?xml version="1.0"?>
    <!--
    For more information on how to configure your ASP.NET application, please visit
    http://go.microsoft.com/fwlink/?LinkId=169433
    -->
    <configuration>
    <system.web>
    <compilation debug="true" targetFramework="4.5" />
    <httpRuntime targetFramework="4.5" />
    </system.web>
    <system.webServer>
    <defaultDocument enabled="true">
    <files>
    <add value="Login.aspx" />
    </files>
    </defaultDocument>
    </system.webServer>
    </configuration>
    Web.Debug.config:
    <?xml version="1.0" encoding="utf-8"?>
    <!-- For more information on using web.config transformation visit http://go.microsoft.com/fwlink/?LinkId=125889 -->
    <configuration xmlns:xdt="http://schemas.microsoft.com/XML-Document-Transform">
    <!--
    In the example below, the "SetAttributes" transform will change the value of
    "connectionString" to use "ReleaseSQLServer" only when the "Match" locator
    finds an attribute "name" that has a value of "MyDB".
    <connectionStrings>
    <add name="MyDB"
    connectionString="Data Source=ReleaseSQLServer;Initial Catalog=MyReleaseDB;Integrated Security=True"
    xdt:Transform="SetAttributes" xdt:Locator="Match(name)"/>
    </connectionStrings>
    -->
    <system.web>
    <compilation xdt:Transform="RemoveAttributes(debug)" />
    <!--
    In the example below, the "Replace" transform will replace the entire
    <customErrors> section of your web.config file.
    Note that because there is only one customErrors section under the
    <system.web> node, there is no need to use the "xdt:Locator" attribute.
    <customErrors defaultRedirect="GenericError.htm"
    mode="RemoteOnly" xdt:Transform="Replace">
    <error statusCode="500" redirect="InternalError.htm"/>
    </customErrors>
    -->
    </system.web>
    </configuration>
    Web.Assemblies.config:
    <?xml version="1.0"?>
    <configuration>
    <system.web>
    <compilation debug="false" targetFramework="4.5" />
    <httpRuntime targetFramework="4.5" />
    <assemblies>
    <add assembly="System.DirectoryServices, Version=4.0.0.0, Culture=neutral PublicKeyToken=b03f5f7f11d50a3a"/>
    </assemblies>
    </system.web>
    </configuration>
    Login.aspx:
    <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Login.aspx.cs" Inherits="Login" %>
    <!DOCTYPE html>
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head runat="server">
    <title></title>
    </head>
    <body>
    <form id="form1" runat="server">
    <div id="loginForm" style="height: 562px; width: 399px; margin-left: 0px" title="Login Form">
    &nbsp;&nbsp;&nbsp;&nbsp;
    <asp:Label ID="loginPageLabel" runat="server" Font-Bold="True" Font-Names="Arial Black" Font-Size="Large" Text="Please Log In"></asp:Label>
    <br />
    <br />
    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
    <asp:Label ID="loginUsernameLabel" runat="server" Text="Username:"></asp:Label>
    &nbsp;&nbsp;&nbsp;
    <asp:TextBox ID="loginUserNameTextBox" runat="server" OnTextChanged="loginUserNameTextBox_TextChanged" Width="213px" Wrap="False" AutoPostBack="True" TabIndex="1"></asp:TextBox>
    <br />
    <br />
    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
    <asp:Label ID="loginPasswordLabel" runat="server" Text="Password:"></asp:Label>
    &nbsp;&nbsp;&nbsp;
    <asp:TextBox ID="loginPasswordTextBox" runat="server" OnTextChanged="loginPasswordTextBox_TextChanged" Width="212px" Wrap="False" AutoPostBack="True" TabIndex="2"></asp:TextBox>
    <br />
    <br />
    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
    <asp:RadioButton ID="loginUAradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginUAradioButton_CheckedChanged" Text="TUPSS Associate" AutoPostBack="True" TabIndex="3" />
    &nbsp;&nbsp;
    <asp:RadioButton ID="loginAFradioButton" runat="server" Font-Bold="True" OnCheckedChanged="loginAFradioButton_CheckedChanged" Text="Area Franchisee" AutoPostBack="True" TabIndex="4" />
    <br />
    <br />
    <br />
    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
    <asp:Button ID="loginSubmitButton" runat="server" Font-Bold="True" OnClick="loginSubmitButton_Click" Text="Log In" TabIndex="5" />
    &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
    <asp:Button ID="loginCancelButton" runat="server" Font-Bold="True" OnClick="loginCancelButton_Click" Text="Cancel" TabIndex="6" />
    <br />
    <br />
    &nbsp;&nbsp;
    <asp:Label ID="loginStatusInstructionLabel" runat="server" Text="Status/Instruction:"></asp:Label>
    <br />
    &nbsp;&nbsp;
    <asp:TextBox ID="loginStatusInstructionTextBox" runat="server" Height="230px" MaxLength="100" Rows="12" TextMode="MultiLine" Width="360px" EnableViewState="False" OnTextChanged="loginStatusInstructionTextBox_TextChanged" ReadOnly="True" TabIndex="-1"></asp:TextBox>
    </div>
    </form>
    </body>
    </html>
    Login.aspx.cs:
    using System;
    using System.DirectoryServices;
    public partial class Login : System.Web.UI.Page
    private string uName; // user-entered username
    private string pWord; // user-entered password
    private int loginLoadCycles; // just keeping track of how many times Page_Load is called
    protected void Page_Load(object sender, EventArgs e)
    if (this.loginUserNameTextBox.Text == String.Empty &&
    this.loginPasswordTextBox.Text == String.Empty &&
    this.loginUAradioButton.Checked == false &&
    this.loginAFradioButton.Checked == false)
    this.loginInit();
    this.setLoginVisibilityAndFocus();
    this.loginLoadCycles += 1;
    private void loginInit()
    this.uName = String.Empty;
    this.pWord = String.Empty;
    this.loginLoadCycles = 0;
    private void setLoginVisibilityAndFocus()
    // Decide on whether or not the Login submit & cancel buttons should be enabled or not
    if ( this.loginUserNameTextBox.Text == String.Empty ||
    (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false) )
    this.loginSubmitButton.Enabled = false;
    this.loginCancelButton.Enabled = false;
    this.loginStatusInstructionTextBox.Text = "Please specify if you are a TUPSS Associate or an Area Franchisee by checking either the 'TUPSS Associate' or 'Area Franchisee' checkbox.";
    else
    this.loginSubmitButton.Enabled = true;
    this.loginCancelButton.Enabled = true;
    if (this.loginPasswordTextBox.Text == String.Empty)
    this.loginStatusInstructionTextBox.Text = "Now that you have entered your username & type, please enter your password.";
    else
    this.loginStatusInstructionTextBox.Text = "When you are ready, please select either the Log In button to login, or the Cancel button to abort.";
    if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == false)
    this.SetFocus(this.loginUAradioButton);
    else if (this.loginUserNameTextBox.Text == String.Empty)
    this.SetFocus(this.loginUserNameTextBox);
    else if (this.loginPasswordTextBox.Text == String.Empty)
    this.SetFocus(this.loginPasswordTextBox);
    else
    this.SetFocus(this.loginSubmitButton);
    protected void loginUserNameTextBox_TextChanged(object sender, EventArgs e)
    protected void loginPasswordTextBox_TextChanged(object sender, EventArgs e)
    // For some reason, after specifying that the password entry box's textmode to 'Password' setting,
    // the UI's password textbox is emptied
    this.loginStatusInstructionTextBox.Text = "NOTICE:\nThis application is still under development.\n\n" +
    "This is why the password you entered is visible. Once this portion of the application is ready, it will be masked.\n\n" +
    "Also, still need to figure out why when changing this to Password entry mode to mask its entered data, password is getting reset.";
    protected void loginSubmitButton_Click(object sender, EventArgs e)
    this.loginLoadCycles = 0;
    this.uName = this.loginUserNameTextBox.Text;
    this.pWord = this.loginPasswordTextBox.Text;
    if (this.loginUAradioButton.Checked == true && this.loginAFradioButton.Checked == false)
    this.loginLADPauthenticate('U'); // authenticate UPS Associates against UPS Corp's Active Directory
    else if (this.loginUAradioButton.Checked == false && this.loginAFradioButton.Checked == true)
    this.loginLADPauthenticate('A'); // authenticate Area Franchisees against UPS Store's iNet Active Directory
    else
    // set colors to show that this is an error instead of a status message or instruction
    this.loginStatusInstructionTextBox.Text = "ERROR: Cannot log in without specifying if you are an UPS Associate or an Area Franchisee!";
    protected void loginCancelButton_Click(object sender, EventArgs e)
    this.loginStatusInstructionTextBox.Text = "You have selected to cancel from logging in...";
    // Still need to plan what to do when user cancels out of logging in. For now, just initialize class attributes
    this.loginInit();
    protected void loginUAradioButton_CheckedChanged(object sender, EventArgs e)
    String msg = String.Empty;
    if (this.loginUAradioButton.Checked == true)
    this.loginAFradioButton.Checked = false;
    msg = "Thanks for specifying that you are a TUPSS Associate. ";
    if (this.loginUserNameTextBox.Text == String.Empty)
    msg += "Now please specify your username.";
    else if (this.loginPasswordTextBox.Text == String.Empty)
    msg += "Now please enter your password.";
    this.loginStatusInstructionTextBox.Text = msg;
    protected void loginAFradioButton_CheckedChanged(object sender, EventArgs e)
    String msg = String.Empty;
    if (this.loginAFradioButton.Checked == true)
    this.loginUAradioButton.Checked = false;
    msg = "Thanks for specifying that you are an Area Franchisee. ";
    if (this.loginUserNameTextBox.Text == String.Empty)
    msg += "Now please specify your username.";
    else if (this.loginPasswordTextBox.Text == String.Empty)
    msg += "Now please enter your password.";
    this.loginStatusInstructionTextBox.Text = msg;
    private void loginLADPauthenticate(char whichActiveDirectory)
    String msg = "Authenticating user '" + this.uName + "' with password '" + this.pWord + "' against ";
    if (whichActiveDirectory == 'U')
    msg += "UPS Corp's Active Directory...";
    else if (whichActiveDirectory == 'A')
    msg += "The UPS Store's Franchisee Active Directory...";
    msg += "\n\nNOTICE:\nThis is still under development.\n\nAt this point, this application is supposed to do something else now but is not yet ready.";
    this.loginStatusInstructionTextBox.Text = msg;
    this.loginStatusInstructionTextBox.AutoPostBack = true;
    // Authenticate using LDAP
    protected void loginStatusInstructionTextBox_TextChanged(object sender, EventArgs e)
    I confirmed that I have System.DirectoryServices.dll located in
    C:\Windows\Microsoft.NET\assembly\GAC_MSIL\v4.0_4.0.0.0__b03f5f7f11d50a3a\ folder and that I as well as System have read as well as read&execute privileges
    not only to all folders in its path but also to the DLL file itself.
    I would appreciate any help in trying to resolve this compilation error so that I can proceed with implementing LDAP features for this endeavor.
    Thanks so much,
    hguico @ The UPS Store

    Hi,
    For web application problem, please post your thread in
    ASP.NET forum.
    Best Wishes!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey. Thanks<br/> MSDN Community Support<br/> <br/> Please remember to &quot;Mark as Answer&quot; the responses that resolved your issue. It is a common way to recognize those who have helped you, and
    makes it easier for other visitors to find the resolution later.

  • PL/SQL Procedure Compilation error

    Hi,
    <br><br>
    I have wrote a PL/SQL Stored Procedure to read a couple of table values and then output some data to a file, when I create the procedure on the database I get the following compilation error:
    <br><br>
    LINE/COL ERROR<br>
    -------- -----------------------------------------------------------------<br>
    25/7 PLS-00103: Encountered the symbol ")" when expecting one of the<br>
    following:<br>
    ( - + case mod new null <an identifier><br>
    <a double-quoted delimited-identifier> <a bind variable> avg<br>
    count current max min prior sql stddev sum variance execute<br>
    forall merge time timestamp interval date<br>
    <a string literal with character set specification>
    <a number> <a single-quoted SQL string> pipe<br>
    The symbol "null" was substituted for ")" to continue.<br>
    <br>
    The script is below: <br><br>
    CREATE OR REPLACE <br>
         PROCEDURE TDF_EXTRACT AS<br>
    v_file UTL_FILE.FILE_TYPE;<br>
    YEAR number(4);<br>
    Q1_VALUE NUMBER(7);<br><br>
    BEGIN<br><br>
    SELECT PERSON_VALUE<br>
    INTO     Q1_VALUE<br>
    FROM PERSON<br>
    WHERE ID = 79;<br><br>
    SELECT EXTRACT(YEAR FROM SYSDATE)<br>
    INTO YEAR <br>
    FROM DUAL;<br><br>
    v_file := UTL_FILE.FOPEN(location => '/tmp',<br>
    filename => 'extratced_values.txt',<br>
    open_mode => 'W',<br>
    max_linesize => 32767);<br><br>
    UTL_FILE.PUT_LINE(v_file,<br>
    'Q1'     ||     YEAR     ||     '23'     ||     Q1_VALUE || '\r\n' ||<br>
              );<br><br>
    UTL_FILE.FCLOSE(v_file);<br><br>
    END TDF_EXTRACT;

    'Q1' || YEAR || '23' || Q1_VALUE || '\r\n' ||
    );Syntax error during concatenation, maybe?
    C.
    Message was edited by:
    cd

  • Can't Export Movie - Unknown Compile Error - Help!

    I edited a 32 minute movie in Premiere Elements 10, and now I'm trying to export it.  At some point during the export, and it seems to vary, I get an unknown compile error.  I've been trying to export the movie for the past week and all I get is failure despite trying just about everything I've found written about how to solve this.
    I have Win 7 Ultimate SP 1 running on a Lenovo desktop machine with an Intel Core 2 Quad CPU at 2.67 GHz, 4GB of RAM, 32 bit proc.
    Premiere is installed on system C drive with 6 GB of free space.
    Project and scrach disks are on D drive with 165 GB of free space.
    Media files are on 2nd E drive with 50GB of free space.
    Project and most source material is NTSC DV -- there are quite a few photos with motion, plus some iPhone HD video on the timeline, hundreds of clips in all plus narration, a few titles, etc.
    Export destination folder is on D drive.
    Everything will render to green lines atop timeline (sometimes it quits during render and I have to keep hitting Enter to continue rendering, but eventually it's all green)
    So far I've tried:
    - Reinstalling PE 10
    - Reinstalling Quicktime
    - Copying all the photos to their own separate folder
    - Editing each photo slightly (outside of PE 10) and resaving to make sure none of the photos are corrupted
    - Emptying the temp folder
    - Deleting all the renders and cache files and letting them rebuild
    - Exporting small pieces of the timeline to try to identify a bad clip -- this is a maddening process and I did find one clip that would generate the error, but I managed to export that to AVI and reimport and replace on timeline.  It would be awfully nice if PE would just TELL ME which clip it doesn't like if in fact it's a clip error.
    - Turning off the shadow / highlight feature I had on some clips, but this wasn't the issue, smaller sections with these clips exported fine
    - Tried exporting to various formats: Vimeo SD, MPEG DV Standard, iPad Standard High Quality, AVI -- all result in the same error (the format I want by the way is Vimeo SD)
    - Rebooting the machine and turning everything off that might possibly consume memory
    This machine has never had problems exporting in the past.  One thing I did try that worked -- installed PE 10 on another (less capable) Win 7 machine, and fed it all the media via an external drive.  The other machine did the export fine (though it took a while given it is underpowered).  This is nothing more than a work around though as I don't normally have access to this machine and I'm not done editing.
    I'm at my wits' end!  What else can I do to get this movie file to export?
    Appreciate any help or clues you can provide to solve this mystery.

    Oh, that is tragic!
    I never had any issues with mine. Maybe it knew how respectful I was, having come from manual rewinds and a sync block? The Moviola was a godsend, at least for me. I am glad that I got to edit film, and on many setups, as some of that translated well to digital Video. Back when I was in film school, Video was 2" tape, and the only editing was by cutting at a 45 degree angle, and splicing the tape. There was not even deck-to-deck editing, way back then. Also, Video looked like crap, at least to my eyes. We could only use a switcher, to "edit," or do a feed to air. Looked like crap!
    As for the Lexus, I can imagine all sorts of problems. My new LX-570 requires me to "Accept," when I put it into reverse, on the rear-view monitor! At least my wife's MB does not require that, but it is a 2011 model, so maybe the 2013 models will require that the user sign off on all sorts of "stuff."
    Now, I can play Finding Nemo, for my rear-seat passengers, while driving, but the front-seat passengers cannot see it, which is just fine. When driving, I am not even a fan of hands-free calls, and declined most of the streaming stock quotes, etc. for XM/Sirius radio. NOT while I am driving. I will save that for reading the WSJ in the club at the airport.
    Some years ago, our driver in London got a new BMW 7-series, and it allowed the playing of DVD's, even in the front, while driving. Not sure that I would want that, but such is life. At least his seats' ventilation system was "well-chilled," where ours' are just air. He almost froze my bum, showing off his new auto.
    Now, working with PS, or PrE in an auto, or even on a mobile device, is just not something that I can wrap my old head around. I want a fast computer, with a big display, and cannot imagine editing Images, or Video, on any handheld (or auto) device.
    Hunt

  • How can I read ALL the compilation errors in a DOS window?

    On compilation using a DOS window, if the number of errors exceeds the window size, some of the errors disappear off the top of the window and I cannot read them.
    Is there an effective solution to somehow use scrolling of the DOS window or transfer the compilation errors to a file?

    Hey buddy,
    When I first started programming with Java, I wondered the same thing. I have the very best solution for you. This one is waaay easy!!!!
    There is a text editor which will not only color code your text for you, but you can easily configure it to give you the compiler /DOS output for Java. Just go to this website and download the program. Enjoy!
    http://www.textpad.com/

  • Compiler error in 7.1

    Hi!
    I can't run LV, I get everytime thins error:
    Compiler error. Report this problem to ni tech support.
    copy cvt str/pict/tag, csrc=0x40
    ~~~~
    Regards
    Sarah
    LV 7.1.1

    Dear Sarah,
    have you updated to LV 7.1.1 or does your problem occur in LV 7.1? I haven't updated to lv7.1.1 by now and we are using the english version.
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

  • Compiled Error in Xcode for iphone game and other questions

    Dear all,
    Hi, I am a newbie of xcode and objective-c and I have a few questions regarding to the code sample of a game attached below. It is written in objective C, Xcode for iphone4 simulator. It is part of the code of 'ball bounce against brick" game. Instead of creating the image by IB, the code supposes to create (programmatically) 5 X 4 bricks using 4 different kinds of bricks pictures (bricktype1.png...). I have the bricks defined in .h file properly and method written in .m.
    My questions are for the following code:
    - (void)initializeBricks
    brickTypes[0] = @"bricktype1.png";
    brickTypes[1] = @"bricktype2.png";
    brickTypes[2] = @"bricktype3.png";
    brickTypes[3] = @"bricktype4.png";
    int count = 0;`
    for (int y = 0; y < BRICKS_HEIGHT; y++)
    for (int x = 0; x < BRICKS_WIDTH; x++)
    - Line1 UIImage *image = [ImageCache loadImage:brickTypes[count++ % 4]];
    - Line2 bricks[x][y] = [[[UIImageView alloc] initWithImage:image] autorelease];
    - Line3 CGRect newFrame = bricks[x][y].frame;
    - Line4 newFrame.origin = CGPointMake(x * 64, (y * 40) + 50);
    - Line5 bricks[x][y].frame = newFrame;
    - Line6 [self.view addSubview:bricks[x][y]]
    1) When it is compiled, error "ImageCache undeclared" in Line 1. But I have already added the png to the project. What is the problem and how to fix it? (If possible, please suggest code and explain what it does and where to put it.)
    2) How does the following in Line 1 work? Does it assign the element (name of .png) of brickType to image?
    brickTypes[count ++ % 4]
    For instance, returns one of the file name bricktype1.png to the image object? If true, what is the max value of "count", ends at 5? (as X increments 5 times for each Y). But then "count" will exceed the max 'index value' of brickTypes which is 3!
    3) In Line2, does the image object which is being allocated has a name and linked with the .png already at this line *before* it is assigned to brick[x][y]?
    4) What do Line3 and Line5 do? Why newFrame on left in line3 but appears on right in Line5?
    5) What does Line 4 do?
    Thanks
    North

    Hi North -
    macbie wrote:
    1) When it is compiled, error "ImageCache undeclared" in Line 1. ...
    UIImage *image = [ImageCache loadImage:brickTypes[count++ % 4]]; // Line 1
    The compiler is telling you it doesn't know what ImageCache refers to. Is ImageCache the name of a custom class? In that case you may have omitted #import "ImageCache.h". Else if ImageCache refers to an instance of some class, where is that declaration made? I can't tell you how to code the missing piece(s) because I can't guess the answers to these questions.
    Btw, if the png file images were already the correct size, it looks like you could substitute this for Line 1:
    UIImage *image = [UIImage imageNamed:brickTypes[count++ % 4]]; // Line 1
    2) How does the following in Line 1 work? Does it assign the element (name of .png) of brickType to image?
    brickTypes[count ++ % 4]
    Though you don't show the declaration of brickTypes, it appears to be a "C" array of NSString object pointers. Thus brickTypes[0] is the first string, and brickTypes[3] is the last string.
    The expression (count++ % 4) does two things. Firstly, the trailing ++ operator means the variable 'count' will be incremented as soon as the current expression is evaluated. Thus 'count' is zero (its initial value) the first time through the inner loop, its value is one the second time, and two the third time. The following two code blocks do exactly the same thing::
    int index = 0;
    NSString *filename = brickTypes[index++];
    int index = 0;
    NSString *filename = brickTypes[index];
    index = index + 1;
    The percent sign is the "modulus operator" so x%4 means "x modulo 4", which evaluates to the remainder after x is divided by 4. If x starts at 0, and is incremented once everytime through a loop, we'll get the following sequence of values for x%4: 0, 1, 2, 3, 0, 1, 2, 3, 0, 1, ...
    So repeated evaluation of (brickTypes[count++ % 4]) produces the sequence: @"bricktype1.png", @"bricktype2.png", @"bricktype3.png", @"bricktype4.png", @"bricktype1.png", @"bricktype2.png", @"bricktype3.png", @"bricktype4.png", @"bricktype1.png", @"bricktype2.png", ...
    3) In Line2, does the image object which is being allocated has a name and linked with the .png already at this line *before* it is assigned to brick[x][y]?
    Line 2 allocs an object of type UIImageView and specifies the data at 'image' as the picture to be displayed by the new object. Since we immediately assign the address of the new UIImageView object to an element of the 'bricks' array, that address isn't stored in any named variable.
    The new UIImageView object is not associated with the name of the png file from which its picture originated. In fact the UIImage object which inited the UIImageView object is also not associated with that png filename. In other words, once a UIImage object is initialized from the contents of an image file, it's not possible to obtain the name of that file from the UIImage object. Note when you add a png media object to a UIImageView object in IB, the filename of the png resource will be retained and used to identify the image view object. But AFAIK, unless you explicitly save it somewhere in your code, that filename will not be available at run time.
    4) What do Line3 and Line5 do? Why newFrame on left in line3 but appears on right in Line5?
    5) What does Line 4 do?
    In Line 2 we've set the current element of 'bricks' to the address of a new UIImageView object which will display one of the 4 brick types. By default, the frame of a UIImageView object is set to the size of the image which initialized it. So after Line 2, we know that frame.size for the current array element is correct (assuming the image size of the original png file was what we want to display, or assuming that the purpose of [ImageCache loadImage:...] is to adjust the png size).
    Then in Line 3, we set the rectangle named newFrame to the frame of the current array element, i.e. to the frame of the UIImageView object whose address is stored in the current array element. So now we have a rectangle whose size (width, height) is correct for the image to be displayed. But where will this rectangle be placed on the superview? The placement of this rectangle is determined by its origin.
    Line 4 computes the origin we want. Now we have a rectangle with both the correct size and the correct origin.
    Line 5 sets the frame of the new UIImageView object to the rectangle we constructed in Lines 3 and 4. When that object is then added to the superview in Line 6, it will display an image of the correct size at the correct position.
    - Ray

  • Compiler error when useing switch statements in an inner class

    I have defined several constants in a class and want to use this constans also in an inner class.
    All the constants are defined as private static final int.
    All works fine except when useing the switch statement in the inner class. I get the compiler error ""constant expression required". If I change the definition from private static final to protected static final it works, but why?
    What's the difference?
    Look at an example:
    public class Switchtest
       private static final int AA = 0;     
       protected static final int BB = 1;     
       private static int i = 0;
       public Switchtest()
          i = 0; // <- OK
          switch(i)
             case AA: break; //<- OK, funny no problem
             case BB: break; //<- OK
             default: break;
      private class InnerClass
          public InnerClass()
             i = 0; // <- OK: is accessible
             if (AA == i) // <- OK: AA is seen by the inner class; i  is also accessible
                i = AA + 1;
             switch(i)
                case AA: break; // <- STRANGE?! Fail: Constant expression required
                case BB: break; // <- OK
                default: break;
    }Thank's a lot for an explanation.

    Just a though:
    Maybe some subclass of Switchtest could decalare its own variable AA that is not final, but it can not declare its own BB because it is visible from the superclass. Therefore the compiler can not know for sure that AA is final.

Maybe you are looking for

  • Help "ascending" to Java NIO

    Hello there. I've been using Java for quite some time, but the few really networked client/server applications I have used, have used java.io and java.net. Now, even I have heard the rumours about Java NIO, and I am curious. I have tried reading up a

  • The user Directory publishing service reported an error

    Some but not all of my users get this error when trying to connect to my CPS managed server: Directory publishing service reported an error. Error Details: End of file or no input:'Operation interupted or timed out' I've deleted, and recreated the us

  • Captivate 3  in Articulate Presenter 09 - Error unable to acquire  LMS API

    Hi , I have created a  10 captivate  movies and published them ( there are no quizzes attached to them however there is interaction in the movies as users have to enter correct text responses, click boxes etc). I have then used  presenter 09 in artic

  • Help with character mode report

    Hi, I have a character mode report which has a query that generates output of data records that are 100 chars long. My requirement is to add a header and a footer record that are only 80 chars long. I created a field of width 80 chars in the header a

  • PC internal fan problem

    My HP pc internal fan is running too fast with making a loud sound as well. And also after this problem occured the computer is workibg too slowly as well , it's taking too much time to open folders and othee things. Can somebody tell me how can I fi