ABAP Courses in the ACM Professional Development Centre
The Association for Computing Machinery offers four ABAP courses in their Professional Development Centre (http://pd.acm.org/netg_listing.cfm). See the section "SAP Development & Reporting."
"ABAP Web Application Server Development"
"ABAP 6.10 Overview"
"ABAP Reporting 6.10"
"ABAP Objects 6.10 Overview "
If you have tried these courses, what did you think of them?
Use of the Professional Development Centre requires membership in the ACM. Therefore you are correct, you must pay for ACM membership to access the courses.
Let me know what you think when you are done. I had the opposite reaction to the "ABAP 6.10 Overview" course. It seems the Overview is well named and that is gives a nice high level introduction to ABAP, but that it is not detailed enough to get someone programming new ABAP without additional materials or training.
Similar Messages
-
The Performance of Developer Server ??
Hi:
In August, Rajs asked: Is WebForms only for Intranet and NOT
Internet?
Now, I need urgently answers and details for this question, the
situation is same in my work. Rajs wrote:
I have deployed a Developer 6.0 application on the web
(Internet). I am using Application Server 4.0.7.1 on Windows NT
SP4. Of course and also JInitiator.
On a 128 MBPs Internet line The time to access www.yahoo.com was
around 5 seconds. The time taken to download the Employee
Details Applet was around 6 minutes. This is certainly not
acceptable.
I want to prove that Developer WebForms is also deployable and
can be used on the Internet as well as the Intranet. I was sadly
disappointed.
I have not tweaked any parameters on the Application Server. So
it is possible I am missing something.Can anybody please comment on this?
Regards
Rajs
nullAccessing external Databases with RFC-based middleware is Ok, but the best performance you usually get by accessing the external database directly from within the SAP ABAP server with the "DB multiconnect" feature. This allows ABAP programs to read and write to others than the primary database. ABAP knowledge is of cause required.
SAP has several products that use this feature and that may already fit your needs, e.g. BI (also known as BW) and SCM (also known as APO). -
From Where can i install ABAP plug-in in SAP Netweaver Developer Studio 7.3?
Hello,
I have Installed SAP NetWeaver Developer Studio 7.3 and I was trying to install ABAP plug-in but i couldn't found the link to install.
Later i found SAP Development Tools for Eclipse this link but its not working. As i came to know it will work only for Luna (4.4) or Kepler (4.3).
Would you please let me know how to install ABAP plug-in in SAP NetWeaver Developer Studio 7.3.
Thanks and Regards,
Shaik Shabeer Ahmed.Hello Ahmed,
Use the links in that page:
NWDS Download Links - Java Development - SCN Wiki
And here also an installation guide:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80a100d2-109f-2e10-e996-c2b80803740b?overridelayout=t…
Best regards,
Serhat -
Advantages of Webdynpro ABAP Over Displaying The Traditional Way in SAP GUI
Hi,
I am new to web dynpro ABAP and therefore have a very basic question.
Assume that a customer wants to implement SAP EEC 6.0.
What is the advantage for the customer and developer to develop and display all custom objects using web dynpro abap and displaying on the web as against developing and displaying in the SAP GUI?
Is it possible to do a BDC using Web Dynpro ABAP?
Inputs would be much appreciated.
Cheers,
MIckno answers so closing the thread
-
ABAP Stack and the Enterprise Portal
If you install the Java and ABAP stack with the portal can you do full ABAP development on the portal?
I want to create a RFC that writes data to a ZTABLE - on the portal.
I would then send the data from the ZTABLE using a RFC connection between the portal and my backend system.
Thanks
PatrickHello Patrick,
yes you can do ABAP development on an ABAP-Stack of the portal Server.
I also use the "ABAP Stack" for Mobile-Infrastructure.
Creating a Z-Table and executing RFC's is no problem.
I think you will only use the ABAP-Stack for Customer-Development,so you only need to install the Basis Components and Plug-Ins on the ABAP-Stack.
Regards
Frank Brackmann
Message was edited by: Frank Brackmann -
SAP NetWeaver Application Server ABAP 7.02 SP6 64-bit Developer Version
When I downloaded the "SAP NetWeaver Application Server ABAP 7.02 SP6 64-bit Developer Version" I only got the Trial Version, so I have a license (from sap.com/minisap) that will expire. Where can I get the Developer Version license?
The trial version is for you to test and evaluate the software. It will expire after 120 (30+90) days. I donu2019t think you can get a permanent license.
-
SAP NetWeaver AS ABAP 7.02 SP6 32-bit - Developer Edition
Hi,
I'm using SAP NetWeaver AS ABAP 7.02 SP6 32-bit - Developer Edition on which I have installed the License Key (using http://www.sap.com/minisap page). On this system I'm trying to install the BI Content 7.04, but I have some problems because I still get "no valid maintenance certificate found for system".
Is it possible to install the package on the SAP NetWeaver AS ABAP 7.02 SP6 32-bit ? What do I have to do to install this package?
I have installed the maintenance license (using SLICENSE). The is from http://www.sap.com/minisap page. After installing the new license, the status it is a green square which indicate that the licenses it is OK.
After installing the maintenance licenses do I need to do something ?I dont know about the developer version which sap has shared but after the application of maintainence certificate you need to install that add on using saint.Thanks.
-
Hi,
I have done Masters in Computer Applications (MCA), and now I am going to join SAP-ABAP course from a general institute,Delhi,India.
So I need your suggestions that is this course will beneficial for my furture career. I have an interest in programming so thats why I am learning this.
Thanks,
DeepanshuRead here: Must read career advice for all beginners - check out this blog
some of the blogs are mine, so you can ask the author here:))
Have a nice reading:)) Cheers Otto -
Information about sap-abap course
sir myself sameer patra i am a b.tech graduate of 2010 batch . i want to do sap-ABAP course....so sir plz suggest me that ,is it preferable to do,and is there job opening in sap for fresher without experience. sir i will be greatful to u if u guide me.
Thanks & regards
Sameer Patrawelcome to SDN..
this is not a forum for these questions. please check the faq section.. this section is very specific to technical questions as you can see.. So please post the messages in correct thread..
best of luck. -
Where can I do ABAP course/training/certification in Sydney, Austraia ?
Hi All,
I wated to learn ABAP, so I want to join an ABAP Training Course in Sydney. or I wanted to do ABAP certification in Sydney.
Can someone please advise that where can I do it from ?
Please try to provide me 2-3 institute's references if possible.
With Regards
Haresh SolankiHi,
if you're in the US, you can explicitly ask for any course to be schduled for any of these BFC courses here:
[https://www.sap.com/usa/services/education/request.epx|https://www.sap.com/usa/services/education/request.epx].
You can then request for a schedule for any of the courses in the BFC Curriculum (to be found here:
http://www.sap.com/services/education/catalog/businessobjectstraining/epm/curriculum.epx?context=%5b%5bBOBJ_FPM_FC%5d%5d%7c)
I hope this helps,
andreas -
Abap course in delhi ncr.
hi
whr to do abap course in delhi ncr.
plz advise.hi
you can try for ducait , noida sec 16 on the back side of MC'd.
regards
vikas -
Removing Professional Development Suite
I want to totally remove all traces of the Professional Development System from my PC. There is nothing shown in the "Programs and Features", so Ii need to do some kind of brute force method of removal. Can someone provide a step-by-step guide that I can follow?
hartzde wrote:
I want to totally remove all traces of the Professional Development System from my PC. There is nothing shown in the "Programs and Features", so Ii need to do some kind of brute force method of removal. Can someone provide a step-by-step guide that I can follow?
There should be a National Instruments Software in the Programs and Features. You can uninstall NI products with that.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Will LabVIEW 6.0.2 professional development system install on WIndows XP?
I wrote a small state machine in LV 6.0.2 under Windows 2000 for controlling and communicating with an instrument via RS232 port.
I own the 6.0.2 professional development system.
1. Will I have problems porting it to Windows XP?
2. Can I develop 6.0.2 applications on Windows XP?
3. Can I use the 6.0.2 run-time engine on Windows XP?
4. Any known issues with using the 6.0.2 Measurement and Automation Explorer with XP?
Regards,
Larry Taibbi
Projects Manager
Ashton Services
35 State Street
Northampton, MA 01060
[email protected]
[email protected]Some people have reporting having issues while others reported that it worked fine. I'm not sure what caused the distinction between the two.
Have you tried installing and using it?
R -
ModuleData.getPrincipalData returns null in the adapter module development
Hi gurus,
i am doing a test on the adapter module development following an article written by William Li:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0ac06cf-6ee2-2c10-df98-e17430ca5949?QuickLink=index&overridelayout=true
my problem is after the EJB has been deployed, it seems that the return of inputModuleData.getPrincipalData() is always null which makes the program can not get the xml payload from the framework.
the main process of the example has been simplified like this:
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData) throws ModuleException {
Object obj = null;
try {
obj = inputModuleData.getPrincipalData();
Message msg1 = (Message) obj;
XMLPayload xmlpayload = msg1.getDocument();}
catch (Exception e) {
ModuleException me = new ModuleException(e);
throw me;
return inputModuleData;
after deployed, i get the following error in the adapter monitor of RWB: (my JNDI is testtest)
17.02.2012 17:13:44.643 Information Send binary file "test8.xml" from FTP server "10.18.48.150:/encrypt_test/", size 206 bytes with QoS EO
17.02.2012 17:13:44.644 Information MP: processing local module localejbs/CallSapAdapter
17.02.2012 17:13:44.644 Information Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System
17.02.2012 17:13:44.645 Information Trying to put the message into the send queue
17.02.2012 17:13:44.648 Information MP: processing local module localejbs/testtest
17.02.2012 17:13:44.648 Error MP: exception caught with cause java.lang.NullPointerException: while trying to invoke the method com.sap.engine.interfaces.messaging.api.Message.getDocument() of an object loaded from local variable 'msg1'
whereas if the code has been changed like this:
public ModuleData process(ModuleContext moduleContext, ModuleData inputModuleData) throws ModuleException {
Object obj = null;
try {
obj = inputModuleData.getPrincipalData();
Message msg1 = (Message) obj;
if (obj != null )
XMLPayload xmlpayload = msg1.getDocument();
catch (Exception e) {
ModuleException me = new ModuleException(e);
throw me;
return inputModuleData;
the file can be read by the file adapter.
i just quite confused that why the return of the getPrincipalData() is null? where is the problem? thanks
Edited by: Stephen Xue on Feb 17, 2012 5:22 AMI'm gonna reply to myself here. I changed the processing sequence of the adapter modules in the in the FileSender channel so that my module comes first then CallSapAdapter. Then getPrincipalData() contains the message.
Hope this helps someone else. -
Use of ABAP expression in the Send Mail Header and Text
Hi Workflow Gurus,
I have a requirement wherein I have to inform the Manager of a user that his/her request for leave availment has been approved. However, we need to show the users name for the Manager to easily identify the user.
Now, I checked the send mail step and it is possible to insert an expression, but the available expressions are confined within the containers available. Hence, we only have the user id of the workflow initiator.
Is there a way to place a code in the send mail expression which will determine the user's employee name given the user id as opposed to having to create an FM and a method to determine the users name? Or is the only recourse to develop and fm and a method to determine these details in the background and pass it to the containers for extraction?
Regards,If you don't have for example the employee name in the available container elements, you need to add it and do the necessary coding/development for it. Classically employee or user data has been retrieved by using a certain standard background task to get the user/employee object based on the user ID. This will require an additional background step but no coding since the task includes the coding already.
It is anyhow possible to try to get the data for example with functional methods by using container operations in the workflow (or it is also possible to do this in binding too) - but then you need to develop a functional method(s). In other words you can use a functional method for example in your binding or in a container operation. Check for example Jocelyn Dart's blog about functional methods. Anyhow, how well the functional methods will work depends on the SAP system version.
Regards,
Karri
Maybe you are looking for
-
Error while loading data from R3 to BW
Hi, After mapping my DataSource created in R/3 system to my Infosource, I was taken to the maintenance screen of the transfer structure. I proposed the transfer rules. But my traffic signal of my transfer rule is not turning green. If I continue to a
-
How to open Password proteced PDFs ?
Hi, I have some work related PDFs with me which are password protected. I can access it via Adobe from my Windows PC at work. At home I usually use Preview to open PDF files, but unable to use it to open password protected PDFs. Any workaround to ope
-
Steps and Check list SNC implementation
Dear Experts. Believe that you'll spend some time to put your precious quotes on this query. 1. How SNC implementation should be done, what are the steps to be carried out? 2. What are the Pre-requisites and check list for implementation? 3. What tes
-
For reasons unclear, the choice to use one finger to click when using the trackpad has been unselected. Now the trackpad cannot be used to click on anything. I can use it to move the pointer and the right-click function still works, but not the lef
-
CS4 brush tool is a few pixels off
Hello. In CS3 when I used the brush tool to clean up masks, I could put the edge of the round cursor on the edge of the subject at hand, and when I clicked the mouse, the brush would land right where I placed the cursor. Now, in CS4, the brush mark e