Abap debugger sarts with any transaction

hi experts,
    recently i have installed netwaver 7.0 sneak preview on my system until now it was working fine
    bit today when i activate transformation,dtp,infopackage... anything transaction ends in abap debugger
    in program GENERATOR object reference METRSDS cant find any dump or trace in st22 or st11.
    please help me out.
sanjeev

Hi Gilberto,
if you set a break-point and system can't stop there, then you can see a system log entry (SM21). Can you see system log entries regarding your break-points?
If not, then I think your break-point can't be reached for delivery.
The include is for all orders, deliveríes and billing documents I think.
You can show us the code part where you want to set the break-point!
Regards,
Klaus

Similar Messages

New to ABAP -- Need help with any BAPI to update the vendor master record

I have a requirement to update the vendor master record ( ie purchasing block data inlfa1 and lfm1 table )directly. i have created the report but my problem is i am updating tables directly by using modify which is not correct according to SAP hence i want to use bapi whereby i can change the fields of the table. does anyone know any bapi which can modify the lfa1-sprem field and lfm1-sperm field. Plz hep me. They have specifically asked me to do it using BAPI's.

MAP2e_lfa1_to_bapivendor_04
MAP2e_lfa1_to_bapivendor_05
will be helpful

Abap debugger automatically starts up on running query

Hi All,
I have a BI 7.0 system. When executing one of the queries from rsrt. It automatically opens of the new abap debugger screen. Any idea how to disable that ?
Best Regards,
Vikash

Hi Vikash,
please check the BREAK-POINT statement you detected - you may have posted it here including the source name where you found ist.
Starting with ABAP600 we have the syntax BREAK-POINT { [ID group] .
If you have any ID here, you should check transaction SAAB for this group. Possibly is has been activated for Break-Points to stop on the server.
Regards,
Clemens

Every transaction ends in abap debugger

hi experts,
recently i have installed netwaver 7.0 sneak preview on my system until now it was working fine
bit today when i activate transformation,dtp,infopackage... anything transaction ends in abap debugger
in program GENERATOR object reference METRSDS cant find any dump or trace in st22 or st11.
please help me out.
sanjeev

Hi Sanjeev,
As you said you have newly installed BI 7.0 have you run the SGEN?
SGEN is transaction which compiles all transactions and buffere them in memory. So that when every you run any transaction it does not take much time.
After installing any SAP system running SGEN is mandartory. Generally SGEN takes 6-7 hours to complete.
Regards,
Ajinkya

How to create number ranges with "OK60" transaction or any other.

Hello,
I need to create a new number range to asigne to a document type , using transaction OK60 ( the error says this transaction).
but I only can display with this transaction, and I would like to update.
Is there any other transaction to do this , or is there any way to do this with this transaction OK60?
Thank you very much.
Kind regards
Olga

Hi,
OK60 indeed is used for creating number ranges for FI/CO earmarked funds transactions. You should press on 'Pencil' button and create an interval. If for some reasons, you cannot do this via this transaction, try using SNRO transaction, with IRW_BELEG parameter. If this also fails, then apply to BASIS team to check your authorizations.
Regards,
Eli

Why my credit card is debitted when i didn't made any transaction with itunes.

why my credit card is debitted when i didn't made any transaction with itunes..
These days having a lot of problems with itunes (apple) they are making automatic transactions over my credit card .
They did 5 transactions in a day and 1 transaction is about 26 USD .. .
Why these kind of burglary happening with my account ...

You've checked the purchase history on your account (Store > View My Account, Store > View My Apple ID on iTunes 11, menu option on your computer's iTunes), and have you made any in-app purchases or have any auto-renewing subscriptions ? If not then you can contact iTunes support via this page (these are user-to-user forums) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

My creditcard is debited with two transactions with 2usd (1USD + 1USD) without any purchase done

My creditcard is debited with two transactions with 1usd each. But i have not purchased anything with 1usd value. please let me know why this kind of transaction is happening?
1USD on 8-may-2012
1USD on 10-may-2012
my id: [email protected]
Pls help

My creditcard is debited with two transactions with 1usd each. But i have not purchased anything with 1usd value. please let me know why this kind of transaction is happening?
1USD on 8-may-2012
1USD on 10-may-2012
my id: [email protected]
Pls help

How to use abap debugger and se80

can any body give easy deatils about it?

Hi
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
Setting and deleting breakpoints
Setting and deleting watchpoints
Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
<
Less than
<=
Less than or equal
=
Equal
<>
Not equal
=
Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:

ABAP debugger document

Hi
Im SAP-BW consultant. can anyone send me the ABAP debugger document for debugging one large ABAP program to
[email protected]
Txs
Kumar

Hi
Debugger
This section of the ABAP Workbench documentation provides information on how to use the Debugger as a test tool for finding errors in the source code of an ABAP program.
Functional Overview
Use
The ABAP Debugger is an integrated test tool within the ABAP Workbench. You use it to check the program logic and to find errors in the source code of an ABAP program. In the Debugger, you can step through the source code of a program. The running program is interrupted after each step, allowing you to check its processing logic and the results of individual statements.
As of Release 6.10, you can also run Business Server Pages (BSP) in the debugging mode. You can also display and set breakpoints here. Business Server Pages can be displayed in the Object Navigator when you select an appropriate application under BSP Application.
Features
The Debugger provides an efficient means of identifying errors in ABAP programs. It contains the following functions:
Ways of starting the Debugger
Choosing different views
Choosing different execution options in the Debugger
Displaying source code in the Debugger
· Setting and deleting breakpoints
· Setting and deleting watchpoints
· Stopping a program at a particular statement or event
Displaying and changing field contents at runtime
Displaying ABAP Objects and references
Displaying and positioning strings
Setting and deleting database locks
Opening the ABAP Editor, or Object Navigator
System settings and runtime warnings
Starting the Debugger
There are two possible strategies for starting the Debugger in the ABAP Workbench:
By setting breakpoints then running the program
By running the program in debugging mode.
Setting Breakpoints
A breakpoint is a signal in a specific line of the program source code. This signal indicates to the ABAP runtime processor to stop the program at the relevant line and start the ABAP Debugger. A distinction is made between static and dynamic breakpoints. For further information about the different types of breakpoints and how to use them, refer to Breakpoints.
Direct Processing
You can start the Debugger without previously having set breakpoints. This is the best procedure to use when you want to test a program right from the beginning. It is also a useful procedure if you are not overly familiar with the program and therefore are not sure where best to set breakpoints. You can start the Debugger as follows:
From the Object Navigator
Select a report or transaction and choose Program ® Test ® Debugging.
From the ABAP Editor
Choose Program ® Execute ® Debugging (or the Debugging pushbutton).
From any screen
Choose System ® Utilities ® Debug ABAP.
From any screen
Enter /h in the command field.
Display Modes in the Debugger
When you are debugging a program, there are various display modes that you can use. All of the display modes have the same structure. The top part of the screen displays an extract of the program source code. The bottom part displays the information specifically available in that display mode. There are also pushbuttons on the screen allowing you to switch to the most frequently-used display modes.
Display Modes Available Using Pushbuttons
Fields
The scrollable field display contains the contents of up to eight fields. The contents of the three most important system fields are always displayed. This is the default display mode in the Debugger. See also Processing Fields
Table
Displays the contents of an internal table. This mode allows you to display and edit the entries in an internal table. See also Processing Internal Tables
Breakpoints
A scrollable display containing up to 30 breakpoints. Next to each breakpoint is a counter. You can also delete breakpoints in this display. See also Managing Dynamic Breakpoints
Watchpoints
You can set a watchpoint for a field so that the program is interrupted whenever the value of that field changes. This display mode contains a list of watchpoints, the fields and programs to which they are assigned, the current values of the fields, and the conditions upon which the watchpoint is activated. See also Setting Watchpoints
Calls
This mode displays the current sequence of events, and the sequence of calls up to the current breakpoint. The last active call is displayed at the top of the list; previous calls are listed in reverse chronological order. When an event (for example, START-OF-SELECTION) concludes, it is deleted from the display.
Overview
This mode displays the structure of the program. It lists its events, subroutines, and modules, and shows which sections belong to which events. It also displays the section currently being processed.
Settings
This mode displays the current Debugger settings. You can change the settings by selecting or deselecting various options. For further information, refer to Settings and Warnings
Other Display Modes
You can access other display modes by choosing Goto ® Display data object.
Single field
Displays the contents and technical attributes of a field.
Structured
field
Displays the components of a structure, along with their contents and attributes. If you double-click a component, the system displays detailed information for it.
Strings
Display the content and current length of the string. You can also display part of the content by means of offset and length.
Internal table
Displays the type, line numbers and contents of an internal table.
Object
Displays the structure of an ABAP Object.
For further information on these displays, refer to Displaying Attributes and Displaying ABAP Objects
Checking System Programs for Errors
To check a program or program component that is part of the ABAP Workbench (for example, the Screen Painter), you must use the system Debugger. To start the system Debugger, choose System ® Utilities ® Debug System from any screen. To stop the system Debugger, choose Debugger ® Debugging off.
Displaying Program Attributes
You can display the attributes Fixed Point Arithmetic, System Program, and Unicode Checks of the program that has just been executed by choosing Goto ® Further Information ® Program Attributes.
Restarting the Debugger
If you choose Debugging ® Restart, debugging mode is stopped and the system takes you to the initial screen of the last transaction you called. If, for example, you started an ABAP program in debugging mode from transaction SE38 (ABAP Editor), choosing Debugging ® Restart will take you back to the screen titled ABAP Editor: Initial Screen. If you want to restart the program in debugging mode, choose Debugging.
Breakpoints
Apart from direct execution of an ABAP program in the Debugger, it is also possible to start the Debugger call by the exact setting of a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The program runs normally until the breakpoint is reached.
There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For further information, refer to Watchpoints.
Breakpoint Variants
The Debugger contains different breakpoint variants:
Static
The BREAK-POINT statement in an ABAP program. Static breakpoints are not normally user-specific. However, you can make them user-specific.
Directly-set
dynamic breakpoints
Can be set in the ABAP Editor or the Debugger. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
Breakpoints
at statement
The Debugger stops the program directly before the specified statement is executed.
Breakpoints
at subroutine
The Debugger stops the program directly before the specified subroutine is called.
Breakpoint at function module
The Debugger stops the program directly before the specified function module is called.
Breakpoint at method
The Debugger stops the program directly before the specified method is called.
Breakpoints at system exceptions
The Debugger stops the program directly after a system exception, that is, after a runtime error has been intercepted.
Static Breakpoints
Static breakpoints are not normally user-specific. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application, when the program execution is always to be interrupted at the same place. For further information, refer to Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints, because you can deactivate or delete them at runtime. They have the following advantages:
You do not have to change the program code
You can set them even when the program is locked by another programmer
You can define a counter that only activates the breakpoint after it has been reached
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For further information, refer to Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Lifetime and Transfer of Breakpoints
A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they are effective during the entire user session, if they are saved by choosing Breakpoints ® Save in the ABAP Debugger. For more details on the subject of sessions and user sessions, refer to Modularization Techniques in the ABAP keyword documentation.
If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
Breakpoints at Statements
You can use this special kind of dynamic breakpoint to interrupt a program directly before an ABAP statement is processed.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at an ABAP statement:
1.Choose Breakpoint ® Breakpoint at ® Statement...
The following dialog box appears:
2.Enter the ABAP statement.
The system sets a breakpoint at all points in the program at which the ABAP statement occurs.
3.Choose ENTER.
The breakpoint applies to all lines containing the specified statement.
Result
The system confirms the breakpoint and adds it to the list in the display. When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Breakpoints at Subroutines
You can use this special kind of dynamic breakpoint to interrupt a program directly before a subroutine is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a subroutine:
Choose Breakpoint ® Breakpoint at ® Event/Subroutine.
The following dialog box then appears:
Enter the name of the subroutine before which you want to interrupt the program. By default, the Program field contains the name of the program that is currently active. The system sets a breakpoint wherever the specified subroutine occurs in the program code.
Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
Breakpoints at Function Module
You can use this kind of dynamic breakpoint to interrupt a program directly before a function module is called.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint for a function module:
Choose Breakpoint ® Breakpoint at ® Function module...
The following dialog box appears:
Enter the name of the function module before which you want to interrupt the program. The system sets a breakpoint wherever the specified event, module pool, or subroutine occurs in the program code.
Choose ENTER.
Result
If you entered a valid function module name, the system confirms that the breakpoint has been set. If the function module exists in the system, the new breakpoint is added to the display list.
Breakpoints at Methods
You can use this special kind of dynamic breakpoint to interrupt a program directly before a method is called.
Prerequisites
You must be already running the program in the debugger.
Procedure
To set a breakpoint for methods:
1. Choose Breakpoint ® Breakpoint at ® Method...
The following dialog box then appears:
2. Enter the name of the method and class before which you want to interrupt the program. A breakpoint is then set each time the specified processing block appears in the source code.
3. Choose ENTER.
Result
The system confirms the breakpoint. The breakpoint is added to the list in the display.
Breakpoints at System Exceptions
You can use this special form of dynamic breakpoint to interrupt a program immediately after a runtime error has occurred.
Prerequisites
You must already be running the program in the Debugger.
Procedure
To set a breakpoint at a system exception:
Choose Breakpoint ® Breakpoint at ® System exception.
Result
The system confirms the breakpoint. The breakpoint is added to the breakpoints displayed.
When a system exception is triggered, a warning triangle appears in the line containing the statement that caused it. If you double-click the warning triangle, the internal name of the runtime error appears.
Static Breakpoints
You should only use static breakpoints during the development phase of an application. You must remove them from your program before you transport it.
Setting Breakpoints
To set a static breakpoint, use the ABAP statement BREAK-POINT . Place the breakpoint in the line at which you want to interrupt the program.
program RSDEBUG_01.
if SY-SUBRC <> 0.
break-point.
endif.
When you run the program, the runtime processor interrupts it when the breakpoints occur. You can number your breakpoints to make them easier to identify ( BREAK-POINT 1, BREAK-POINT 2 ).
Static breakpoints are not normally user-specific. The program is, therefore, always interrupted as soon as the runtime processor reaches the line containing the breakpoint. The program is interrupted regardless of the user who executes it.
However, you can set user-specific static breakpoints using the BREAK statement followed by your user name. For example, if you use the statement BREAK SMITH , the program is only interrupted when user Smith runs it. Although user-specific breakpoints appear in the program code, they are not active when other users run the program. You should, however, be careful if an application is being used by several users with the same name.
Deleting Breakpoints
Since static breakpoints apply to all users, you must remove them from the program once you have finished testing it. In the ABAP Editor, you can find breakpoints quickly by choosing Utilities ® Global search. You can also use the Extended Program Check to find them.
If you do not remove static breakpoints from your program, they will be transported to your production system. This could cause serious problems in the production system.
Dynamic Breakpoints
You can set up to 30 dynamic breakpoints without changing the program code. Dynamic breakpoints can be set either in the ABAP Editor or directly in the Debugger.
Setting Dynamic Breakpoints in the ABAP Editor
You can set dynamic breakpoints in the ABAP Editor regardless of whether you are in display or change mode. You can also set breakpoints directly from within the Debugger at runtime. To set a dynamic breakpoint in the ABAP Editor:
Position the cursor on the line of the source code at which you want to set the breakpoint.
Choose Utilities ® Breakpoints ® Set or the Stop icon. The system confirms that the breakpoint has been set.
To display a list of all dynamic breakpoints in a program, choose Utilities ® Breakpoints ® Display. You can use this list to navigate to a particular breakpoint or to delete one or more breakpoints from the program.
Setting Dynamic Breakpoints in Debugging Mode
To set a dynamic breakpoint in the Debugger:
Position the cursor on the line in which you want to set the breakpoint.
Select the line by double-clicking it or choosing Breakpoint ® Set/delete.
The system sets the breakpoint, and displays a small stop sign to the left of the relevant line. If the line already contained a breakpoint, it is deleted.
When you finish your debugging session, the breakpoint is automatically deleted unless you have explicitly saved it.
Saving Breakpoints
If you want to leave the Debugger temporarily, you can save your dynamic breakpoints so that they are still active when you return to the Debugger within the same terminal session.
To save the breakpoints that you have set in the Debugger:
Choose Breakpoint ® Save.
The system saves all of the breakpoints that you have set in the current program. These breakpoints will remain active until you either explicitly delete them or log off from the system.
You can also delete breakpoints that you have saved:
By deleting individual breakpoints from the display and then saving again. In this case, only your selected breakpoints will be deleted.
By choosing Breakpoint ® Delete all. In this case, the system deletes all dynamic breakpoints.
Managing Dynamic Breakpoints
The ABAP Debugger provides a convenient user interface for managing breakpoints. To open the breakpoint display, choose Breakpoints, or, from the menu, Goto ® Control debugging ® Breakpoints.
Example
Functions
This display mode contains the following functions for breakpoints:
Breakpoint Display
The scrollable breakpoint display contains up to 30 dynamic breakpoints. For breakpoints that you set directly, the program name and line number at which the breakpoint occurs are displayed. For special breakpoint forms, the list displays the statements, events, subroutines, and module calls at which the relevant breakpoints are set.
Counter
In the breakpoint display, you can specify a counter. When you use a counter, the breakpoint is not activated until it has been reached a specified number of times. For example, if you enter 5 for the counter, the breakpoint is not activated until it is reached for the fifth time. After the breakpoint has been activated, it remains so, and the counter no longer appears in the breakpoint display.
Deleting Breakpoints
Position the cursor on the breakpoint that you want to delete, and either double-click the line or choose Breakpoint ® Set/delete. To delete all breakpoints, choose Breakpoint ® Delete all.
Activating and Deactivating Breakpoints
Position the cursor on the breakpoint that you want to activate or deactivate and choose Breakpoint ® Activate/deactivate.
Watchpoints
Like a breakpoint, a watchpoint is an indicator in a program that tells the ABAP runtime processor to interrupt the program at a particular point. Unlike breakpoints, however, watchpoints are not activated until the contents of a specified field change. Watchpoints, like dynamic breakpoints, are user-specific, and so do not affect other users running the same program. You can only define watchpoints in the Debugger.
Use
You set watchpoints in the Debugger to monitor the contents of specific fields. They inform you when the value of a field changes. When the value changes, the Debugger interrupts the program.
Features
You can set up to five watchpoints in a program.
See also Setting Watchpoints.
You can also specify the conditions on which a watchpoint is to become active.
You can specify logical conditions between up to five conditional watchpoints.
See Specifying a Logical Expression.
You can define watchpoints as either local or global. If you define a global watchpoint, it is active in all called programs. Local watchpoints are only active in the specified program.
You can change and delete watchpoints.
See Changing Watchpoints.
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables.
See Memory Monitoring with Watchpoints
Setting Watchpoints
If you want to interrupt a program when the contents of a field or structure change, use a watchpoint. You can set up to five watchpoints, including watchpoints for strings.
A watchpoint can be either local or global. Local watchpoints are only valid in the specified program. Global watchpoints are valid in the specified program, and also in all the other programs it calls.
Procedure
To set a watchpoint, start the Debugger and proceed as follows:
Choose Breakpoint ® Create watchpoint or the corresponding pushbutton. The Create Watchpoint dialog box appears:
Decide whether you want to set a local or global watchpoint.
Enter the program and the name of the field for which you want to set the watchpoint. In the Program field, the name of the program currently running is always defaulted.
If you want your watchpoint to be activated each time the contents of the field change, the definition is now complete, and you can return to the Debugger by pressing ENTER .
To create a conditional watchpoint, that is only activated when a particular situation arises, choose one of the following relational operators.
Operator
Meaning
< Less than
<=
Less than or equal
=
Equal
<>
Not equal
>= Greater than or equal
Greater than
You can use the Comparison field option to specify whether the comparison is to be carried out with a value that you specify or with the contents of another field. Depending on your choice from step 6, enter a value or a field for the comparison.
Result
The system confirms the watchpoint and adds it to the list in the display. When you finish your debugging session, the watchpoint is automatically deleted unless you have explicitly saved it.
Specifying Logical Links
If you have more than one conditional watchpoint, you can specify a logical link between them:
OR
Only one of the specified conditions must be met
AND
All of the conditions must be met.
Changing Watchpoints
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list. The following dialog box appears:
Choose the pencil icon in the line containing the watchpoint you want to change.
Change the watchpoint attributes in the Create/Change Watchpoint.
Choose ENTER .
Deleting Watchpoints
You cannot delete watchpoints by choosing Breakpoint ® Delete or Breakpoint ® Deactivate/activate. Instead, proceed as follows:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to display the watchpoint list.
Choose the trashcan icon in the line containing the watchpoint you want to delete.
Memory Monitoring with Watchpoints
You can use watchpoints to display changes to the references of strings, data and object references, and internal tables. By placing an ampersand (&) in front of the object name, you can display the reference in question in hexadecimal format. With internal tables, you can also display the table header by placing an asterisk (*) at the beginning of the name.
&objectname
Displays the references of strings, internal tables as well as data and object references
*itab
Displays the table header of the internal table itab
Example
If a watchpoint is set for the object in question at runtime, the program is stopped as soon as the reference is changed. A short dump can be intercepted in this way to stop the program being terminated when the memory is overwritten.
Analyzing Source Code
The Debugger contains an extensive range of functions that help you to analyze the source code of a program. You can step through the source code of a program in four different ways. For further information, refer to Stepping Through the Source Code
For information about functions within the source code display, see Displaying the Source Code
There are also different display modes that provide various information and display the contents of individual fields, tables, and so on:
Reward if usefull
To create a logical link between watchpoints:
Choose Goto ® Control debugging ® Watchpoints or the Watchpoints pushbutton to open the watchpoint display.
Set the Logical operator between watchpoints option.
The default value is always OR .

Is there any transaction code for uploding logo in ALV reports.

is there any transaction code for uploding logo in ALV reports.

hi,
call function 'REUSE_ALV_COMMENTARY_WRITE'
       exporting
            it_list_commentary = t_header.
            i_logo             = 'Z_LOGO'.
endform.
Upload Logo for REUSE_ALV_COMMENTARY_WRITE
For those who wish to upload and use a picture in your ALV abap reports.
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
or
Import Logo and Background Picture for Reporting
In this step, you can import a customer-specific logo and a background picture into the R/3 System. These will be displayed in the header area of reports in HR Funds and Position Management.
From the SPRO:
HR Funds and Position Management --> Dialog Control --> Customize Reporting Interface --> Import Logo and Background Picture for Reporting.
Activities
1. Enter the Name of your logo/background picture as an object key in the initial screen.
2. Make sure that the class name is PICTURES, and the class type is OT.
3. Choose Execute.
4. Double-click the document type Picture on the Create tab page. A dialog box will appear in which you can enter the path in which the logo/background picture can be found.
5. Enter the path and choose Open. The logo will be uploaded into the current R/3 System. If the logo/background picture is to be transported into other systems as well, choose Transport.
6. Return to the initial screen and repeat the procedure after having entered the Name of your background picture as an object key.
Please note that the logo/background picture can only be displayed in ALV-based reports with an HTML header. Manually programmed reports such as business distribution plans are not based on the ALV.
If you have selected several initial objects, ALV-based reports in HR Funds and Position Management will automatically use a hiearchical-sequential display. A logo is not displayed here either. Note also that the logo cannot be printed (see print preview in program).
Make sure that the logo does not exceed a height of 100 pixels because it would mean that the header of the report will be scrollable.

ABAP Memory value in ABAP Debugger

Hi,
Is it possible to view the value of ABAP memory IDs in ABAP debugger?
I know we can view the active ABAP memory IDs in debugger using Goto -> System Areas -> ABAP Memory
Whereas my question is for those listed ABAP memory IDs, can we see the value in debugger itself?
Thanks in advance.
Regards,
Balaji Viswanath.

Hi,
Did you sort out your problem yet? I am looking for the same. So far I know one can get the ABAP stack with the FM SYSTEM_CALLSTACK. This returns the stack but I still have not figured out how to access any stack objects yet.
Let me know,
Andreas

Proxy - ABAP mapping - file with content conversion

Scenario goes from ECC (proxy) to XI then I do ABAP mapping. I have tested the ABAP mapping with SXI_mapping_test transaction. My ABAP mapping puts the payload back into XML and then the data goes to a file adapter where I also use content conversion. If I do not do the content conversion the data comes out correct in XML. When I change to content conversion I get 20 blank lines. Is it possible to do content conversion from ABAP mapping?
Any help would be greatly appreciated.
Thanks
Skip Ford

Hi,
Have you checked whether the blank lines you got in the XML files are from the blank nodes or elements which you created in ABAP mapping?
If it is, then just create your elements or nodes whenever there are corresponding values in your ABAP mapping.
e.g.
If l_sender_service is NOT initial.
elementsender = odocument->create_simple_element(
                               name = 'SenderService'
                               value = l_sender_service
                               parent = msgtype ).
endif.
Regards,
Lim...

The New Abap Debugger

Hi everybody...
In which SAP R/3 Version i can find the New Abap Debugger? Is this a new project that hasn't be implemented yet?
Regards,
Carlos Lerzundy

Hi Carlos
Here is an excerpt from the article "New Features in SAP Web Application Server 6.40 for ABAP Developers" by Karl Kessler (Product Manager of the SAP NetWeaver foundation) published at SAP Insider.
"In SAP Web AS 6.40, the new design of
ABAP Debugger cleanly separates it
from any program you are debugging.
By separating the control of the Debugger
from your other applications, you can
ensure that the results of the Debugger
program do not interact with the
program youre checking. However, note
that this separation leads to a slightly
lower performance, since the new
Debugger runs in its own main mode."
Perhaps I am misremembering but I've read that the first version that the new ABAP Debugger is contained is 6.30.
Here is two related documents:
1. <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/new%20features%20in%20sap%20web%20application%20server%206.40%20for%20abap%20developers.pdf">Karl Kessler; SAP Insider; New Features in SAP Web Application Server 6.40 for ABAP Developers</a>
2. <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/the%20new%20abap%20debugger%20-%20an%20introduction.pdf">Boris Gebhardt, Cristoph Stoeck; The New ABAP Debugger</a>
Hope this helps
*--Serdar

Credit block the customer with no transactions

I have a requirement i.e Credit Block the customer with no transaction for past 6 months
how can this be achieved

Hi
You need to decide first which transaction to consider i.e past six month sale order, delivery, billing etc.
If you want to consider the billing document for the sales history check - then take the help of ABAPer & write a logic in below user exit , while creating a sale order system should check if any bililng doc exist within last six month, if yes, there should not be a block if no, then set a block.
LVKMPFZ1: USER_CREDIT_CHECK1
To activate this block, go to OVA8, tick user1.
thanks

SYNTAX_ERROR when executing any transaction

Hi All,
    I am getting the following error as soon as I log in. I am not able to execute any transaction. The dump occured while I was applying Stack 10. The performance assistant ask to generate/activate the interface SAPLSRABAX_EXC using menu painter but I cant even get to SE41.
Any ideas.
Thanks in advance,
Shabnam
Performance Assistant:
Status LIVE of the user interface SAPLSRABAX_EXC missing
Message no. 00264
Diagnosis
The specified GUI status either does not exist or was not generated.
Procedure
Use the Menu Painter to check whether the status required actually exists. If it does, then generate the interface SAPLSRABAX_EXC (using the Menu Painter).
Runtime Errors         SYNTAX_ERROR
Date and Time          07.04.2007 12:26:38
Short text
     Syntax error in program "SAPLSEUF ".
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSHI1" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
     The following syntax error occurred in program "SAPLSEUF " in include
      "CL_ENH_TOOL_FUGR==============CU " in
     line 133:
     "Method "IF_ENH_TOOL~COMPARE_WITH" is not declared or inherited in clas"
     "s "CL_ENH_TOOL_FUGR" - - - - - - - - - - -"
     The include has been created and last changed by:
     Created by: "SAP "
     Last changed by: "SAP "
Error analysis
     The following syntax error was found in the program SAPLSEUF :
     "Method "IF_ENH_TOOL~COMPARE_WITH" is not declared or inherited in clas"
     "s "CL_ENH_TOOL_FUGR" - - - - - - - - - - -"
Runtime Errors         SYNTAX_ERROR
Date and Time          07.04.2007 12:26:38
Trigger Location of Runtime Error
     Program                                 SAPLSHI1
     Include                                 LSHI1U19
     Row                                     23
     Module type                             (FUNCTION)
     Module Name                             STREE_RESET_INTERNAL_TABLES
Source Code Extract
Line SourceCde
     1 FUNCTION STREE_RESET_INTERNAL_TABLES.
     2 *"----
     3 ""Lokale Schnittstelle:
     4 *"       IMPORTING
     5 *"             VALUE(STRUCTURE_ID) LIKE TTREE-ID
     6 *"----
     7 *
     8   DATA: FUNCTION_MODULE LIKE TFDIR-FUNCNAME.
     9   DATA: ACTIVE LIKE RS38L-GLOBAL.
    10 *
    11   CALL FUNCTION 'STREE_GET_FUNCTION_MODULE'
    12        EXPORTING
    13             STRUCTURE_ID        = STRUCTURE_ID
    14 *         DATABASE_IDENTIFIER =
    15             ACTION              = 'IT'
    16        IMPORTING
    17             FUNCTION_MODULE     = FUNCTION_MODULE
    18 *         DATABASE_IDENTIFIER =
    19 *         MESSAGE             =
    20        EXCEPTIONS
    21             OTHERS              = 0.
   22 *
>>>>>   CALL FUNCTION 'RS_FUNCTION_ACTIVE_CHECK'
   24        EXPORTING
   25             FUNCNAME = FUNCTION_MODULE
   26        IMPORTING
   27             ACTIVE    = ACTIVE
   28        EXCEPTIONS
   29             NOT_FOUND = 1
   30             OTHERS    = 2.
   31   IF ACTIVE EQ FALSE.
   32     EXIT.
   33   ENDIF.
   34 *
   35   CALL FUNCTION FUNCTION_MODULE
   36        EXCEPTIONS
   37             OTHERS = 0.
   38 * reset also table with header information. This is necessary since
   39 * the header is important for comparison with buffer data
   40   CLEAR EXISTING_STRUCTURES. REFRESH EXISTING_STRUCTURES.
   41   CLEAR STRUCTURE_TADIR_DATA. REFRESH STRUCTURE_TADIR_DATA.
   42 * reset context resolution buffer

Hi Shabnam,
You are right .When a support pack is being imported in the system for performance reasons SPAM is set up so that by default no screens or ABAP programs can be generated..This needs to be changed if you want to work during an SP import.
Choose EXTRAS in SPAM initial screen choose SETTINGS and choose IGNORE GENERATION ERRORS.
It is better to avoid workign during a SP import on the system
Check the link for more details
http://help.sap.com/saphelp_nw04/helpdata/en/d7/56e89a884b11d2b422006094b9ea64/frameset.htm
*Reward points if the asnwer was helpful

Abap debugger sarts with any transaction

Similar Messages

Maybe you are looking for