ABAP developer access key

How can i get the ABAP developer access key?

Thanks you all!!
I tried so many times but i got the error
Authorization Error! Currently you do not have authorization to use this function. To request the authorization, please contact one of the administrators at your company:
Then I reported my administrator, but unfortunately he also got the same Authorization Error!!
I don't know, the correct way for getting the access key.

Similar Messages

About ABAP developer ACCESS KEY

Hi guys:
I have installed IDES 4.6c successfully,When I created ABAP program using SE38,system prompted "You are not registered as a
developer.Please register in the Online Service System (OSS).In the OSS you will receive an access key."
My question: How can I login OSS?Tcode,Could you please tell me detail operation? thanks

OSS is not a tcode , check the site service.sap.com
consult your basis for that...
also check the table DEVACCESS for the access key by giving ur user id if there is one already created for u

Where to enter developer access key

Hello gurus,
By logging on through the OSS login have created developer key. But how to register it with the R/3??? Which is the T-code and what are the steps involved???
Thanks and Regards,
Rahul

Hi Rahul,
First i requested you to get in touch with ABAP moulde lead and get confirmation
mail from customer, then only we can create Developer Access key.
Procedure explains how to obtain a developer key:
a) Log into OSS.
b) Click on the Registration button and then click the Register Developer button.
c) Select appropriate customer installation.
d) Enter the user ID in the user box,.
e) Click on the Register button.
f) Copy the KEY (by highlighting and using ctrl/c for copy and ctrl/v for paste) and email the user
of his key. The ctrl/c, ctrl/v ensures that the complete key is copied since it is a very long
number.
g) Click the Cancel button when done or click the Register button to register another developer.
h) Click the green '¬ ' to exit.
Thanks.

Invalid Developer Access key while editing FM Exit_SAPLRRS0_001

Hi,
I want to create a new user exit variable for reporting. I created a proj in CMOD and included the component RSR00001 which
includes the FM - Exit_SAPLRRS0_001. I try editing the function module, its asking me to enter the Developer Access key. System is not accepting the key which I pass even though there is a proper entry against my id in the table DEVACCESS.
Any possible solutions

Hi,
When you reach the exit EXIT_SAPLRSAP_001, dont try to go in edit mode into it. There would be a Include in it. Double click on this include.
INCLUDE ZXRS**.
You would reach this include. Now, go in change mode of this include. It would allow you to go in change mode with your access key.
If there is no such include inside this function module, then follow the below steps to create a new include.
What you are trying to do is changing the standard function module EXIT_SAPLRSAP_001. If you want to change any standard objects, you will need specific access keys for these objects based on their Object Directory Entry from your BASIS guys.
e.g. for EXIT_SAPLRSAP_001 you can find this info from Menu bar-> Goto -> Object Directory Entry. If your provide this info to BASIS, they would give you unique access key which would work only on this function exit. Then you can change this function exit.
Edited by: Rahul K Rai on Oct 28, 2010 4:50 PM

Developer access key

Hi there!
I understand that one needs to be registered as a developer in the system before changing/creating any object.
However, system prompted me for developer access key when I tried changing some custom program in SE38 and system allowed me to change SAP script form without prompting anything about developer access key.
Any information on why system never prompted for developer access key when changing SAP script form in SE71?
G@urav

Thanks for all the replies!
Still the question remain same..
Why system allows to change a custom SAP Script form to a user who is not registered as a developer in the system?
G@urav

Developer access key question

Hello,
I am trying to create some domains per a OSS note. the domains are FILE_APPL and FL_EXTN. when I create the first domain, the system prompted me for the developer access key. The BASIS person sent me the key and I entered and created the first domain. I am trying to create the second domain and again it asked me for the developer access key. I typed the same number and I am getting a "incorrect entry" box. when I clicked on the information button, it states that I should only have to enter this key once.
why does the invalid entry box appear when I am entering the same key?
why do I have to enter the key again?
am I doing something wrong in the process?
thanks in advance for the help

Basically, if you are referring to a developer key, you only have to enter this once, but if you are referring to an object registration key, then these are specific to each object, which would be the reason why the key doesn't work for the second object. It appears that the first is ok, so you now need a second object registration key for the second domain, have your basis person register this object and get the other key.
Read the dialog carefully, it probably says about registering the object and not entering the developer key.
Regards,
Rich Heilman

How to delete developer access key

Hi Experts,
How can i delete developer access key from SAP user,
Regards

The user is registered as a developer for a certain system at SAP. I do not know if there is a way for deregistering a user. If the user has a developer role AUTHORIZATION OBJECT, he can enter the key received from SAP. Once entered, it is stored in DEVACCESS.
Just remove the DEVELOPMENT AUTHORIZATION OBJECT from the user and the key is useless because it can not be entered again..
Regards,
Clemens

NSP NW04s - Sneak Preview Developer Access Key -- NOT WORKING !!!!!!

Folks,
I have installed the NW04S NSP ABAP system. Everything went fine with the installation. The key which is given in the installation document '29671482393151224771' is not working for developer BCUSER.
I see many other folks facing the same issue in the forum and I tried all the ways posted in the forum... creating Z and Y program Se38 and tried with SE80, but no luck.
I would highly appreciate if any one have a crack on this issue. Infact I reinstalled the system thinking there could be a flaw in my fisrt installation... but the result is same.
Thanks much.
-Guru

I tried 00000000000000000000 and that is also NOT working. My trial version is now licensed for 90 days on a Windows XP professional laptop. I do not know if I had the problem before I renewed the INITIAL 4-weeks licence to the 90-day license.
Everything else works fine. I can create and run various programs using the trial version. However when I attempted to modify an implementation method in the ABAP class - BCALV_TREE_EVENT_RECEIVER, I am asked for an Access Key.
Is anybody from SAP looking into this? I believe it is clear that there is a problem with Access Key for a number of us. That the default 29671482393151224771 is NOT working for everybody.
Any help in solving this Access Key issue is greatly appreciated.
Thanks!

New licence and developer access key

Hi all,
i wanted to extend my licence, process is ok but now BCUSER are not registred as a developer, before extending licence it was the case.
How can i do please ?
Regards,

Solution on http://www.sap.com/solutions/netweaver/minisap.epx
Developer license key : 29671482393151224771

Access key error for ABAP user in Development

Hi,
I am getting the following error while entering the development access key for Development client 103

Syed Amir Ijaz Bukhari wrote:
i get this key from SAP Market place my basis administrator generated it at front of me but still it is not working as if i place it in IDES it worked but not in Development.
Compare the installation number of your IDES system with that of your development system. Do you see? They're different. Different installation requires a different key. Go and have another chat with your basis friends.

IDES ABAP Workbench and access key

Hi everyone,
I am new to SAP, please Help.
1. How i can use OSS ID.
2. I installed 4.6B IDES, but ABAP - Workbench is not
accessable.
3. How i can get Access Key for ABAP Workbench.
Thanks in Advance
Shareef

Hi,
If you have OSS ID, you can use it to logon to service.sap.com where you have all kinds of support and help services available. That is where you use it.
ABAP workbench will be accessible if you have authorization. I think you mean to say you are not able to create/change objects. For this you will have to register your userid as developer (again at service.sap.com) and that will give you the developer access key that you can then use.
If you are changing any SAP object, you will need to get the corresponding key from OSS.
If you do not have OSS logon, then you can forget about it (well, not strictly so, but that is the official 'truth'.).
cheers,
Ajay

ACCESS-KEY (add developer)

Hello!
I have installed Netweaver testdrive for Suse Linux for teach myself in ABAP-Programming.
After starting TA SA38 and trying to generate the program Z_HELLO i get a input prompt where i should type the access-key. Is it really necessary to registrate a developer in service market place to program ABAP on the demosystem?

Hi Bjorn
log on into the Web AS 6.4 system
User:      DDIC
Password: DDIC (or ur DDIC password)
Langugage: EN
The SAP Easy Access desktop is displayed.
- create a user for developing
Select:                  SAP standard menu
                               -> Tools
                            -> Administration
                                     -> User Maintenance
                                        -> Users
Enter user:              DDIC
Select from menu:        User names -> Copy
Copy the user from DDIC to DEVELOPER.
Enter an initial password for the new user DEVELOPER.
Save the user by clicking the diskette symbol.
- log out of the system and log on as user DEVELOPER
Select from menu:        System -> Log off
Log in as user DEVELOPER (the system will ask for a new password for
this user).
- create new ABAP program
Double click:            ABAP Editor
Enter program name:      ZZ_HELLO_WORLD
Click the button:        Create
(ZZ is a reserved name space)
- enter the access key to add the new developer
User name:    DEVELOPER
Access key:   35408798513176413512
Installation: DEMOSYSTEM
- set program attributes
Enter title:             Hello World
Select type:             Executable program
Save the attributes.
Save as local object.
- enter the ABAP source and test the program
REPORT ZZ_HELLO_WORLD .
WRITE 'HELLO WORLD' .
Save this ABAP source by clicking the diskette symbol.
Press the button:        Activate
Select from menu:        Program -> Test
regards,
kaushal

Access key requested when creating new program in abap editor

I am trying to create a new program in sap netweaver 7.01 trial version. netweaver promts me for creating object confirmation but after that I get a register object dialog box requesting an access key on the demosystem installation. where can I find such a key.
please note that I am not a SAP customer. Its a trial version of netweaver 7.01 on a stand alone pc. Furthemore I know that naming my programs starting with Z will bypass the object registration key.

Hi ,
when you are using the first time se38 it will ask developer access key
u will get that from the service market place
take the help of u r basis consultant
regards,

Reg:Access Keys

Hi,
Can anyone please tell me is it possible to create access key for Z programs.If possible how can we do it??

hi,No acess key is needed for creating z programs .
Basis team creates and provide you with an Developer Access key for doing any development activity.
you can check table DEVACCESS. enter your user ID to see access key is generated or not. IF you dont find any entry you have to contact Basis .
thanks

How to get Access key for ABAP Program development in HANA Studio

Hi,
I have got instance for ABAP on HANA development system.
But while creating new program it is asking me for Access key, since I do not have user id pwd for service market place I couldnt able to create the access key.
Can any one suggest the way to create ACCESS KEY??
Thanks,
Ram

Dear Ram,
it seems that you need to follow the chapter 6.1 in the documentation...:
Kind regards, Stephan

ABAP developer access key

Similar Messages

Maybe you are looking for