ABAP Dump Error - System error in program RSMDATASTATE

Hi Experts,
We have a Process Chain which loads data, fills aggregates and does a rollup.
Suddenly last week , the rollup step failed giving a error: No filled aggregates for the Cube
We ran the Program SAP_AGGREGATES_ACTIVATE_FILL.
After running the Program, the rollup happened for one day but again today while performing rollup we are encountering a ABAP dump.
The error analysis says: System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-
We checked the SAP Note : 858671, but we are not sure about the support packs.
Please Help.
Vivek Das Gupta

Hello.
Did you check note 1094948 if it was applied? Please apply this note and retest the report.
Thanks.
Walter Oliveira.

Similar Messages

Application Error, System Error and Error in SXMB_Moni

Dear PI Gurus,
I am kinda new to PI(XI) environment, and my self confused when I try to search failed messages in XI. I saw in Status group, there is Application Error, system Error and Error under SXMB_MONI. And I am wondering what is the different between these errors. Worst to come it all errors, Why we do have this separated errors? Can anyone tell me, what is the difference between this errors?
Thank You
Regards
Ramesh

Hi
- Application Error related to SOAP
just look at tgis Blog
/people/jin.shin/blog/2007/05/21/handling-web-service-soap-fault-responses-in-sap-netweaver-xi
also look at this Thread for SXMB_MONI-system error occured
SXMB_MONI-system error occured during persist
Regards
Abhishek
Edited by: Abhishek Agrahari on Jan 21, 2009 7:48 AM

VF04 - Error System error in: table: report: LFMRIF02 routine: SET_NUMBER

Hi guys,
I'm currently getting an error when I run VF04 with more than 999 sales orders. The error which I'm getting is:-
"Error System error in: table: report: LFMRIF02 routine: SET_NUMBER"
Upon further debugging, I found out that Buzei is the line item number and in the subroutine SET_ITEMS (Include LFMRIF28) l_buzei is incremented by 1 each time we encounter an empty/000 line item number. Unfortunately when l_buzei is at 999, an addition of 1 takes it back to value 000. It is this 000 value that triggers the error message we had seen in subroutine SET_NUMBERS (Include LFMRIF29).
Has anyone encountered this error before? Some points as to where I can start would be helpful.
Thanks.

Hello..
Your suggested OSS note was created 2006, nevertheless it was still helpful for me to start my search from there. Also for that note, it will effect the Funds Management reporting line items, it will simply don't appear.
Better alternative would be OSS 964228, this basically skips the '999' items and proceed. No affects on the funds management reporting either.

Executing query error: System error in program SAPLRRI2 and form REP_A

Hello Experts,
I am facing problem while executing query.
I have activated a query from BI content. The query is activated successfully in development and running successfully in development, so I transported the same into QA.
When I execute this query into quality, automatically debuger opens. After I come out of debuger I get following error message:
" >> Row: 82 Inc: LRRMSU13 Prog: SAPLRRMS
System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text)
Error when generating dataProvider "
This query is using some standard structures, which are running successfully in other queries in QA.
what would be an issue?
Regards,
Nirav Shah

Hi,
Try to regenerate the query in RSRT t.code.
   ie) RSRT - give the query name - Generate report ( icon will be there near to Execute + debug) .
After generating the report, (logoff and login )try to execute the query again ..if the above solution doesn't work, check the below OSS notes which may help for you.
OSS notes : 1. 1121766
                   2. 1117966
                   3. 1225856
Regards,
Siva.

DTP error: "System error in program CL_RSR and form GET_COB_PRO-01-"

Hi Gurs,
When I am lasting data in Production, from DSO to a Cube with DTP I get error
In Extract from DataStore u201CSystem error in program CL_RSR and form GET_COB_PRO-01-u201C.
The DSO is loaded from 0FI_GL_10. I do not get this problem in Development
We have BW 7.3 SP05
Any ideas?
Regards, Reynir

Hi,
Check the below note :
Note 1550723 - System error in program CL_RSR and form GET_COB_PRO-01-
Also check in SM21/ST22 for any message number along with the error.
Regards,
Sunil

BIPublisher Template Builder Error: System Error &H80040111 (-21472211231)

Hi,
I have installed BIPublisher Desktop 10.1.3.4.2 on my Windows XP SP3 machine and i can see Template Builder Add-In added to MS Word. But, When ever i try to access Template builder menu, word is displaying the following error and i can't do anything.
"*System Error &H80040111 (-21472211231) Cannot Supply Requested Class Factory" (On header it says, Microsoft Visual Basic)..*
I had same installation (BIP 10.1.3.4.2 on Windows XP SP3 system) at my earlier client and no issues there. In both cases i have Microsoft Office 2007. I tried BIPublisher 11.1.1.5 Desktop too but same error. Can any one suggest any thing?. We tried re-installing MS Office but no luck. I found couple of posts on Microsoft support website but nothing helped.
Thank you
Vijay

AT LAST IT WORKED...
We installed Office 2010 by keeping Office 2007 (you can do this by creating new installation folder for new office). Then we were able to get rid of this error using Word 2007. Looks like our office 2007 installation is missing few Visual Basic libraries which were fulfilled with Office 2010 installation. WHich may be strange as the office copy we have is our client copy (federal Govt). Luckily my client maintains both office 2007 and 2010. For those who doesn't have Office 2010, i am not sure what you can do but sorry.
Thank you
Vijay
Edited by: 894280 on Dec 20, 2011 9:48 AM

Transpot error" system error in lock managment"

Hi ,
When Iu2019m transporting infoobjects from BI DEV to BI Q while importing its showing u201Csystem error in lock managementu201D.
When I drill down the error its showing the following message.
Message no. AD025
Diagnosis
A system error has occurred in the lock management function.
The system was unable to determine whether a lock entry existed for the selected object.
System Response
The selected object could not be locked.
Only display mode can be used.
Procedure
Make a note of the error code and inform your system administrator
And In the error its not showing specific infoobjects ,when I searched forums I got one note 928044, but I skeptic that it works .
Please provide some inputs ASAP.
Thanks
chaitu

You didn't mention whether you are seeing this error message while building the transport/request or at the time of applying on BIQ....
Anyways, if you are seeing this message while trying to create a new transport for your infoobjects:
Please make sure all your infoobjects are not in any other *open" requests already? That is, if you have any other requests that are still open, try "releasing" them before trying to create the new transport/request.
Hope this helps.

Namespace Errors System Error 1355 - Specified domain does not exist or could not be contacted

Ok, lets start with my environment:
dc1 - windows server 2003 r2
dc2 - windows server 2012 r2
fs1- windows server 2003 r2
fs2 - windows server 2012 r2
Namespace - \\<fqdn>\data (the fqdn would be like contoso.microsoft.com)
I am in the process of migrating everything from server1 to server2 (dc and fs listed above). I am done with mostly everything except DFS. I have migrated the data, setup permissions, shares, etc. and replicated the data between fs1 and fs2.
I have verified that all data is currently replicated and up to date, so no backlogs. I am trying to add dc2 and fs2 as namespace servers. This is so that I can point all of the referrals to FS2 that way when I remove FS1 no one gets an error
about not being able to find the files. The problem is that from all 4 servers, I receive an error message when loading the namespace via DFS Management tool. I then thought because of the drastic differences between the versions, the next best
thing would be to export the namespace and then import it into the new server, but even attempting the export command (dfsutil) gives me the same error. My suspect is that the original namespace server was removed sometime ago without the previous IT
person properly migrating everything (but I am at a loss cuz here I am). I then thought if I go through ADSIedit, I can change the namespace server to the new one for all of my shares, and then possibly be able to load the namespace within the MMC tool
(again just a guess); however, I cannot find anything listed for namespace or remoteservers under the properties of the share.
Note: the namespace does work when I navigate to it from a PC. \\contoso.microsoft.com\data does bring up folders and files. (changed the name for obvious reasons)
At this point, I just want to have my new namespace server, so that I can change the referrals, and decommission my other servers. (And yes there are many other steps I need to perform for the decommissioning, but that's not the point of this). I
have read numerous articles on this and haven't found a way to accomplish what I want. Even though I walked through the steps listed for those issues and unfortunately they either did not apply or did not work. I prefer to not use ADSIedit if at
all possible, simply because it's not the "clean" way of doing things, but if I have no other option then I have no other option.
Edit 1: In event viewer on dc1, under File Replication Service on the left hand side, I see the following error appear numerous times (not every day, but still a lot). I have not performed any of the steps listed simply because
I do not know if this pertains to my problem and I don't want to start troubleshooting a server I plan on decommissioning unless I need to (say for the above issue):
Event ID: 13568
Source: NtFrs
Description:
The File Replication Service has detected that the replica set "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)" is in JRNL_WRAP_ERROR.
Replica set name is : "DOMAIN SYSTEM VOLUME (SYSVOL SHARE)"
Replica root path is : "c:\windows\sysvol\domain"
Replica root volume is : "\\.\C:"
A Replica set hits JRNL_WRAP_ERROR when the record that it is trying to read from the NTFS USN journal is not found. This can occur because of one of the following reasons.
[1] Volume "\\.\C:" has been formatted.
[2] The NTFS USN journal on volume "\\.\C:" has been deleted.
[3] The NTFS USN journal on volume "\\.\C:" has been truncated. Chkdsk can truncate the journal if it finds corrupt entries at the end of the journal.
[4] File Replication Service was not running on this computer for a long time.
[5] File Replication Service could not keep up with the rate of Disk IO activity on "\\.\C:".
Setting the "Enable Journal Wrap Automatic Restore" registry parameter to 1 will cause the following recovery steps to be taken to automatically recover from this error state.
[1] At the first poll, which will occur in 5 minutes, this computer will be deleted from the replica set. If you do not want to wait 5 minutes, then run "net stop ntfrs" followed by "net start ntfrs" to restart the File Replication
Service.
[2] At the poll following the deletion this computer will be re-added to the replica set. The re-addition will trigger a full tree sync for the replica set.
WARNING: During the recovery process data in the replica tree may be unavailable. You should reset the registry parameter described above to 0 to prevent automatic recovery from making the data unexpectedly unavailable if this error condition occurs again.
To change this registry parameter, run regedit.
Click on Start, Run and type regedit.
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
and update the value.
If the value name is not present you may add it with the New->DWORD Value function under the Edit Menu item. Type the value name exactly as shown above.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Edit 2: I have verified that firewalls are off and I can communicate to all 4 servers from each other.
Edit 3: Attempted to try and fix error reported in 'Edit 1'; however the registry key mentioned does not exist (looked at all 4 servers to verify).

I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"

Error System error. Please re-try your action. If you continue to get this

First try and first bug on access manager when trying to create a new group.-
Using a Mac, browser Chrome inside the Oracle network.
Do we really want to use this with customers ?
Edited by: user938907 on Jan 24, 2013 12:07 AM

The behaviour you are seeing is due to a timing issue which I am investigating.
Groups use a servlet running on the server and the Workspaces use the native REST API within Beehive - clicking rapidly to the REST based tabs is possible before the full context is set up and the system throws an error. If you shift/reload the page and try again it is normally OK.
We have nearly 75,000 user on the system - 2/3rd of them customers to answer your last qustion.
Phil

System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-

Hi Experts,
We found an error ABAP/P Processor: Message_type_x and Error analysis shows "System error in program RSMDATASTATE and form RSM_DATASTATE_CHECK-10-"
I found a forum that close to my issue: ABAP Dump Error - System error in program RSMDATASTATE
Also, I checked the SAP Note : 858671 and 1094948.
As for my BW system, the system component information is SAP Netweaver BI 7.0 Release 700 Level 0019. Does it mean the both sapnotes alreay apply to my sap system?
Could anyone please advices me in this issue? I am so newbie in SAP BW. I'm so apology if they already have a forum or a note that related to my issue.
Thank you everyone for further assistances
With Best Regards,
Molly

Hi Molly ,
A per my experience and and observation. Message_type_x issue will occur in two scenarios.
1) When ever Sytesm copy happend.
2) Triggering of info package twice at a same time.
Case1:
When ever system copy happens, we will have init request still pointing to the Previous targer syatem's in Init.
Thsi can be resolved by reinitilization of source request.
Note: Make sure that Init reqiuest is same in both Source and Target systems.
Case 2:
Message_type_x May occur by triggering the info package at a same time twice(some time we also get xx request is inprocess alert).
With respect to the following blog:
Kindly check the request in RSMDATASTATE.
1) Request SID for which all requests are technically o.k.
2) Request SID for which all requests checked for quality.
3) Request SID, up to which aggregates are to be rolled up.
Best Regards,
Maruthi

System error in program SAPLCJWB (RC016) - F1

Hi Experts,
                 I am facing the fallowing error '' System error in program SAPLCJWB (RC016) -> F1 '' from a BAPI_PS_PRECOMMIT bapi which is used after the bapi '''BAPI_BUS2054_DELETE_MULTI' at where it is deleting the WBS elements from the project.
       what is so strange is that when i run with one single salesorder i.e for one porject , it is executing correctly with out giving any error but when the same is run for multiple projects it is throughing the above mentioned error. Please let me know what can be done to mitigate this error while executing multiple projects.
The below metioned is the sequence of code which i used in the program.
* Initialize gobal memory for sales order data
CALL FUNCTION 'SD_SALES_DOCUMENT_INIT'.
* Call bapi to initialize
CALL FUNCTION 'BAPI_PS_INITIALIZATION'.
* Call BAPI to delete the wbs elements
CALL FUNCTION 'BAPI_BUS2054_DELETE_MULTI'
    EXPORTING
      i_project_definition = pv_project
    TABLES
      it_delete_wbs_element = lt_delete_wbs_element
      et_return             = lt_return.
* Keep only error messages
DELETE lt_return WHERE NOT ( type EQ gc_msg-type-error OR type EQ gc_msg-type-abort ).
IF lt_return[] IS INITIAL.
*   Call Commit
    CALL FUNCTION 'BAPI_PS_PRECOMMIT'
      TABLES
        et_return = lt_return.
*   Keep only error messages
    DELETE lt_return WHERE NOT ( type EQ gc_msg-type-error OR type EQ gc_msg-type-abort ).
    IF lt_return IS INITIAL.
*     Commit and wait
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = gc_abap-true.
    ENDIF.
ENDIF.
Thanks ,
Moderator message - Please use code tags to format your code
Edited by: Rob Burbank on Feb 8, 2010 2:03 PM

Hello,
I understood that it is giving dump with tha BAPI....
as there is a IF condition before it's cal....amy be that BAP is only getting called whne there is a scenario of multiple sales order / project....
I would suggest to check that BAP...if there is any syntaxt error in that...
open the BAPI in SE37 and check through 'Extended program check'...
Thanks
Krish

System error in program SAPLRRSV & Form RRSV_CHAVL_TO_VALUE_CONVERT

Hi,
While running a Bw Report I'm getting the following error:
System error in program SAPLRRSV & Form RRSV_CHAVL_TO_VALUE_CONVERT
When checking the report found that one of the Characteristic of the report is in incorrect Internal format. As a result it shows inconsistency when checking the values of the charactersitic for conversion exit.
Tried correctin this error by doing a correct error but it didnt work.
When checked the SID table the characteristics had some invalid records which are not maintained in the Master Data table.
How to correct this error?
-Thanks
Sree

Hi Sree,
We're having the same problem. I'd like to know how to solve it. Could you please tell me how to do it?
Thanks.
Best regards,
Julian.

System error in program SAPLRSOA

Hello All,
I tried to execute a query and it resulted in the following error:
System error in program SAPLRSOA and form FUNC RSOA_VCUBE_READ_REMOTE_DATA[6] (see long text).
In BI, the data is readfrom the remote cubes. And there seems to be error in the function used to read the data from these remote cubes.
Further on seeing the long text, I got the follwing message:
Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299
Can someone pls help me on this soon?

Hi,
Pls chk this note;
Note 983605 - Query on RemoteProvider: No data or termination
Symptom
A query on a VirtualProvider (SAP RemoteCube) or on a MultiProvider that contains a Virtual Provider terminates with an error message from the source system. Possible errors are:
Unexpected error: reduce_field_list
Or: The query does not return any data.
Or: If you carry out the query on a MutiProvider with virtual PartProvider, it may return incorrect data, because the part from the RemoteCube is missing.
Other terms
RSOA_VCUBE_READ_REMOTE_DATA, PERFORM transform_to_ts, Remote InfoCube, InfoProvider, Cube, data target, destination
Reason and Prerequisites
This problem is caused by a program error.
The VirtualProvider (SAP RemoteCube) is connected with a DataSource via a (3.X) InfoSource.
The navigation step of the query leads to a limitation (selection) on a characteristic that is filled with a constant in the transfer rule (between 3.X InfoSource and DataSource).
Technical: Initial entry in field list.
Solution
BW 3.0B
           Import Support Package 33 for 3.0B (BW 3.0B Patch 33 or SAPKW30B33) into your BW system. The Support Package is available once Note 914950 "SAPBWNews BW 3.0B Support Package 33", which describes this Support Package in more detail, has been released for customers.
BW 3.10 Content
           Import Support Package 27 for 3.10 (BW 3.10 Patch 27 or SAPKW31027) into your BW system. The Support Package is available once Note 935963 "SAPBWNews BW 3.1 Content Support Package 27", which describes this Support Package in more detail, has been released for customers.
BW 3.50
           Import Support Package 19 for 3.5 (BW 3.50 Patch 19 or SAPKW35019) into your BW system. The Support Package is available once Note 928662 "SAPBWNews BW Support Package 19 NetWeaver'04 Stack 19", which describes this Support Package in more detail, has been released for customers.
BW 7.0
           Import Support Package 10 for 7.0 (BW 7.0 Patch 10 or SAPKW70010) into your BW system. The Support Package is available once Note 914304 "SAPBWNews BW 7.0 Support Package 10", which describes this Support Package in more detail, has been released for customers.
In urgent cases, you can implement the correction instructions.
You must first implement Notes 932065, 935140, 948389, 964580 and 969846, which provide information about transaction SNOTE. Otherwise, problems and syntax errors may occur when you deimplement some notes.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, the short text of the note still contains the words "Preliminary version"
Hope this helps
Regards
CSM Reddy

System error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01

Hi,
I am trying to execute a report and it gives me this error "system error in program SAPLRRI2 and form LRECH_SUMM_FUELLEN_6-01" I have done a bunch of cell editing stuff and when I go and see each cell looks good,I am not able to figure out where exactly this issue is. Can anyone help me with this. I tried to even switch on the Trace in RSRTRACE but it goes to the debugger and stuck in some SAP code. Don't know what exactly the problem is. Any help would be appreciated.
Thanks
Jay.

Hello Jay,
If valid for your system release and support package level please apply the SAP note 1129450.
Best Regards,
Des

System error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01 Message

Hi Gurus,
I am getting error 'system error in program SAPLRRI2 and form FEMS_IN_FORMULA_GET-01' while checking and executing a query.
The scenario is :
- The query is using Replacement path formula variables and when I do remove these the error disappears.
- I recreated the same formula variable but the error message reappears.
- We are separating systems (moving on to new system) and the query runs absolutely fine in the old system.
- The same variable is been used in some other queries as well but they run absolutely fine without any error.
Any suggestions what is going wrong ? Should I raise an OSS to SAP, thats going to be the final GO !!
I have tried almost doing all things but the error remains the same. This is quiet urgent and Reply will be much appreciated.
Best Regards
Ritesh

Hi,
Thanks for the reply. OSS note 982328 becomes irrelevant in my case as we are on SAP BW 7.3 and SP SAPKW73003. So this is the most recent and latest version of SAP.
One more update is I tried regenerating the query in RSRT/RSRT1 but it starts in debug mode. This is of more worry to me now. Any suggestions or solutions are welcome, meanwhile I will raise this to SAP.
Best Regards
Ritesh Singh

ABAP Dump Error - System error in program RSMDATASTATE

Similar Messages

Maybe you are looking for