ABAP dump Error while creating service order in PCUI.

Hi Experts,
                 We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors         RAISE_EXCEPTION
Date and Time          02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
|    function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj Patil

Hi Thirumala,
Thnaks for the reply.
I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil

Similar Messages

Abap dump error while release Production order

Dear Gurus,
Abap dump error is creating while release production order , pour some light on this issue.
Regards,
Kamal

Hello,
use transaction ST22 to analyze the error type. There you have the detail of the error message, the program and the line of the ABAP code where the dump was triggered.
Best regards,
Andrea

Error while creating service order in web ic 5.0

Hi All,
we are facing problem with service order in web ic 5.0.whenever we click on service order in navigation area it is throwing an error message as given below.
Note
The following error text was processed in the system RQ4 : No business transaction type was found
The error occurred on the application server pssapcmq_RQ4_01 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system RQ4 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server pssapcmq_RQ4_01 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server pssapcmq_RQ4_01 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 370 -u: BEJAW1M -l: E -s: RQ4 -i: pssapcmq_RQ4_01 -w: 0 -d: 20080111 -t: 133612 -v: ERROR_MESSAGE_STATE -e: No business transaction type was found
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please help me
Regards
Madhav

Hello Madhav,
You have to maintain your 'business transaction profile' (SPRO->CRM->IC Web->Business Transaction->Define bus. trans. prof.) in the customizing and assign that profile to your IC WebClient profile (the one you assigned in the org. model)
In the business transaction profile you must make sure that at least one transaction type (e.g. ZSRV) is assigned as 'Dependent business transaction' and that entry is flagged as 'Service'.
Also make sure that that transaction type (ZSRV) has leading business transaction category 'Service process' (BUS2000116).
This should solve your problem!
Kind regards,
Joost

Error while creating return order(Complaint) in IC web client

Hi SAP Experts,
I am getting following Error while creating return order(Complaint) in IC web client.
Error when processing your request
What has happened?
The URL http://sapcrd.comfort.com:8000/sap/bc/bsp/sap/crm_ic/default_delta.do was not called due to an error.
Note
The following error text was processed in the system CRD : Exception condition "NON_EXISTING_HANDLE" raised.
The error occurred on the application server sapcrd_CRD_00 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: PRC_PD_HEAD_ADD_COND of program SAPLPRC_PRICING_API
Function: CRM_PRIDOC_UPDATE_EC of program SAPLCRM_PRIDOC_COM_EC
Form: EXECUTE_CALLBACKS_PLANNED of program SAPLCRM_EVENT_OW
Function: CRM_EVENT_SET_EXETIME_OW of program SAPLCRM_EVENT_OW
Function: CRM_ORDER_COMPLETE_SINGLE_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN_SINGLE_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN_MULTI_OW of program SAPLCRM_ORDER_OW
Function: CRM_ORDER_MAINTAIN of program SAPLCRM_ORDER_API
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
Method: IF_EX_ORDER_SAVE~PREPARE of program CL_EX_ORDER_SAVE==============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system CRD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapcrd_CRD_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 2 in transaction ST11 on the application server sapcrd_CRD_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 330 -u: VORUSX -l: E -s: CRD -i: sapcrd_CRD_00 -w: 2 -d: 20080324 -t: 021723 -v: RABAX_STATE -e: RAISE_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Maximum points will be awarded for useful information.
Thanks,
Rony

Hi,
I notice there is a Z class being called.
Method: IF_EX_ORDER_SAVE~PREPARE of program ZCL_IM_PRICE_ADJUSTMENT=======CP
You should check this customized class.
Cheers,
cady.

Error while creating Work Order

Hello Experts,
I am getting below error while creating work order via add-on named beas but the error seems to coming from SBO.
Please advise.
Thanks
Deepak

Hi,
Plz check this thread:
What does this error mean?

Dump error while creating or double click the info package

Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
Steve

Here are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks.

Error while create sales order

Hi,
Please help.
I am facing error while create sales order.
No item category available (Table T184 OR VERP )
Message no. V1320
Diagnosis
No item category could be determined for the combination OR VERP .
System Response
The system does not allow further processing of this item.
Procedure
Check the entries in table T184 by means of which item category determination is controlled.
If you do not have the authorization to do this yourself, contact your system administrator.

Hi,
Check in spro whether Item categorygroup VERP is assigned to sales document type.if not assign.
Path
SPRO-SD-sales-sales douments-sales document item-assign item categories.

Problem while Creating Service order through Work Order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Closed..

Problem while creating Service order

Hi Gurus,
I have a problem While creating Service order (me21n) through - Work order it contains service requisitions.
So that means they carry information such as G/L and work order number while entering the requistion no in PO Creation Screen (me21n) which automatically should be picked from the work order refference.
But problem here is the service items and all other are assigned to PO except the Account Assingnment tab which is GL Account and Work Order No and Cost center..
Can anyone explain me this?
Is this something that one can explain?
Regards,
Murugesh R
Rewards for value replies.

Hi Murgesh,
If GL code is not getting bydefault from the system it is needed to be provided by the user.
If normally one GL is there or other than master data services if single GL is there u can set that in SPRO.
it is avalible in deafult settings in order node
If you are creating the order with refrence to PR then it will take account assignement as "F" system will pick up all the details from PM module. This is the integration of MM & PM module.
But if your PO is not w.r.t. PM orders PR then needs to be given manully.
Ramesh
Edited by: RameshChandra Soni on Jul 25, 2008 8:16 AM

No Functional Area Found Error while creating service data in me22n

Hello,
While creating service data for a purchase order in ME22n I am getting error like " No functional area found" .
Please tell me how to maintain the Functional area for a particular GL account
In the help i can found that we can find the functional area "The functional area can be determined either using the cost element, the account assignment object (such as the cost center or order)"
How we can determine this please through some light on this statement.
Thanks
Pradeep
Moderator message: not directly related to ABAP development, please post again in the appropriate functional forum.
locked by: Thomas Zloch on Oct 15, 2010 9:55 AM

Hello Madhav,
You have to maintain your 'business transaction profile' (SPRO->CRM->IC Web->Business Transaction->Define bus. trans. prof.) in the customizing and assign that profile to your IC WebClient profile (the one you assigned in the org. model)
In the business transaction profile you must make sure that at least one transaction type (e.g. ZSRV) is assigned as 'Dependent business transaction' and that entry is flagged as 'Service'.
Also make sure that that transaction type (ZSRV) has leading business transaction category 'Service process' (BUS2000116).
This should solve your problem!
Kind regards,
Joost

Runtime error while creating sales order in VA01

Dear all,
In our develpment server(ecc 6.0),while creating sales order in VA01 for a sales area, when ever entering material number and quantity and press enter, it is giving error and taking to Runtime error long text showing syntax error in program RK2LSFOC
application patch level for both production and development is same.
can any one suggest the solution please

Please note the error details
Runtime Errors         SYNTAX_ERROR
Date and Time          07.01.2010 17:43:06
Short text
Syntax error in program "RK2LSFOC ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RK2LSFOC " in include "RK2LSFOC
" in
line 128:
"No component exists with the name "KWBRUM". ."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP* "
Error in the ABAP Application Program
The current ABAP program "SAPLKEAK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "RK2LSFOC ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program RK2LSFOC :
"No component exists with the name "KWBRUM". ."
|    " "

Hi error while creating sales order

hi
i am getting 'not able to save' message while i am creating sales order.
how should i proceed to know where is the problem???
i tried debugging but it is taking lots of time, is there any other way i can know the reason for this error in standard code.
there is no wrong data entry while creating sales order.
i just want to know what are the ways to know where is the problem in the standard code.
thanx
rocky

hi ,
try too create a sales order after that check transaction code ST22 U WILL FIND AN SHORT DUMP then check in the source code extract an pointer will be visible where the error is coming and it will also show the program name , please read the dump analysis care fully
srinivas

Revenue Recognition - error while creating sales order

Hi,
one of my colleague is having a Problem. Its very urgent. could you guys help.
I have used Revenue recog as"b" and Accrual start period as "a".
We are getting the error while creating a sales order, G/L account no. not found.
We have checked all the account assignment config but couldn't find anything.

Hi guys,
I have a question, we being SD consultants, do we deal with n e of the revenue issues, I am assuming we deal it to a really brief extent, but I am not familiar with the areas of doing it, so could someone please help me by letting me know the areas where we deal with those issues and how are they looked upon, any material would also be great.
Just in case, my email is : [email protected]
Look forward for a response
Thanks..

Error while creating sales order

while creating sales order for a particular plant there is error coming
NO NUMBER RANGE FOR DOC TYPE ZOS1VXBAK-AUARTSILD
PLANTXVBAK-VKBUR.
Intailly I have check the no series we have internal no series for all plant,the
number series which start 195000001, only one plant the giving the above error, rest all plant it is as applicable above series.
kindly guide me for the same.

Hi Sanjay
This is regarding number ranges defining and assigning tips which you can follow as below:
Whenever there is a new Sales Org being created, you will be required to maintain Number Ranges for Sales Documents which are allowed for your New Sales Area.
Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
Here you provide the system a specific Number range as follows:
Number range Key Start Number range End Number Range+Current Number
For Example: If you want to propose the following Number Range
*1 9000076000 9000076999 0
The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
*1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
Here , by making this , you are assigning a Key to a Number Range Series.
All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
The Assigning Part is done as follows:
The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
This can also be reached in IMG by:
Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"
Besides this:
If a new Shipping Point is created then Delivery Number ranges are required to be maintained.
Similarly,
If a new Plant is created then Billing Number Ranges are required to be maintained.
Regards
Naren

Error while creating Production order without BOM

Hi Guys,
While creating production order without a BOM i am getting the following error in the error log.
Error: BOM for material xxxxxx does not contain any valid items
Message no. CO636
Kindly help.
Regards,
Sid

Dear customer,
could you check in the master data screen of the order if one BOM has been selected?
please coudl you check your customizing the following transactions:
OPJM
OPJI
what do you have in 'BOM slection field' MRP4 view of the header material?
Please check if with this info you can find the missing data to explode the BOM
regards
Maria

ABAP dump Error while creating service order in PCUI.

Similar Messages

Maybe you are looking for