ABAP dump error while updating product master in APO
Hi All,
Greetings from Vijay!
I need to your help to resolve below issue ;
I am getting error '
No simulation parameters could be set for the
active version'
While i am updating and trying to assign active version to my product master in APO which are created in APO for regression testing
and also sometimes system throwing dump error'
Error in the ABAP Application Program
The current ABAP program "/SAPAPO/SAPLDM_LC_SQL" had to be terminated because
it has
come across a statement that unfortunately cannot be executed.;
I appreciate your help
Thanks
Vijay Job
Hi Vijay,
Can you check note 1465462 ?
The same problem is mentioned in the note with correction .
Regards,
Mukesh pandey
Similar Messages
-
Abap dump error while release Production order
Dear Gurus,
Abap dump error is creating while release production order , pour some light on this issue.
Regards,
KamalHello,
use transaction ST22 to analyze the error type. There you have the detail of the error message, the program and the line of the ABAP code where the dump was triggered.
Best regards,
Andrea -
ABAP dump Error while creating service order in PCUI.
Hi Experts,
We are getting following ABAP dump error while creating service order in PCUI which is working fine in GUI.
Runtime Errors RAISE_EXCEPTION
Date and Time 02.01.2008 14:55:38
Short text
Exception condition "TYPE_NOT_FOUND" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_CRM_ELEMDESCR==============CP" raised the
exception
condition "TYPE_NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
| function module from the display of active calls.
We have added custom fields in the service application. these custom fields with Z-structure & data elements are included in BSP structure CRMT_BSP_SRV_OIC_SRCHRES in development system.But the same Z structure & custom fields are exist in the production system but not included in BSP Structue CRMT_BSP_SRV_OIC_SRCHRES.
This may be the reason resulting this ABAP dump error in PCUI while creating Service order.
How these Z structures can be included in the BSP Structure CRMT_BSP_SRV_OIC_SRCHRES in production system?
Helpful answers would be rewrded max points as it is high priority issue.
Regards,
Basavaraj PatilHi Thirumala,
Thnaks for the reply.
I have enhanced service application using transaction EEWB to add new custom fields. these fields are there in Z structure created by the system in production system. All the transports are moved to target system. Problem is that Z structure( contains custom fields) created while doing EEWB is not included in BSP structure.
I f transports are missed to move to target system, Is there any other alternative to solve this problem?
Regards,
Basavaraj Patil -
XD01 assertion failed error while updating customer master data
Hi Guys,
This is an error when I use transaction XD01 to create customers accounts, If you have any ideas do let me and we'll try it....
The error does not let an BDC or LSMW progress as well. There are also no recent sap notes on the same.
The error is as follow
ASSERTION_FAILED
Short text
The ASSERT condition was violated.
What happened?
In the running application program, the ASSERT statement recognized a
situation that should not have occurred.
The runtime error was triggered for one of these reasons:
- For the checkpoint group specified with the ASSERT statement, the
activation mode is set to "abort".
- Via a system variant, the activation mode is globally set to "abort"
for checkpoint groups in this system.
- The activation mode is set to "abort" on program level.
- The ASSERT statement is not assigned to any checkpoint group.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
I have a company code CG01 with sales organization CTS0 and I want to transfer or extend all the customer master data to another company code CG03 with the sales organization CTS0
The things that I have tried and not work
using xd01, fd15, fd16, fd01, does not wok and gives the error as above
The things that I have tried and it works
Change the sales organization from CTS0 to CTS1 I am able to post the customer master data, using any of the above tcodes and it does not give any error, however the client wants to sales organization to remain CTS0
So please give me any ideas as per your experience as this transfer of master data has to happen by Monday, else I'll be fried by my boss
My number is 9820029197
Will also keep you'll posted on any developments on this case,
Ronan Pinto>
> Firstly I am from SAP FI, so totally new to SAP SD
>
Then you are best person to explain the reason on why the same sales organization, can't be assigned to different company codes. When a sales is done through one sales organization, then will the profit/loss be accounted in different company codes. Is it legally allowed in the country, where your customer is doing business? How you are going to develop the balance sheet? Again being the FI person, you are best judge to provide the details to your customer and not a SD guy.
>
> 1) How did the system not give an error while putting the data inside CG02 with sales organisaton same as CST0 same as in company code CG01.
>
I dont see any other method than removing the assignments in the backend and uploading the data. You can consult a Basis person to find the change logs for the assignment table. In my opinion, removing the sales organization from a company code assignment just for loading a customer master data and then reassigning to original sales org is a crooked method and/or not a professional method.
>
> 2) Since I have limited experience of SD, If I have to convince my client about the use of CTS1 sales organisation or a unique sales organisation against his argument that it worked for company code CG02, how should I do it.......
>
As explained above, how the sales will be accounted in different company codes (even if the system allows to assign the same sales org to different company codes)?
I would recommend you to post this question in FI forum (after closing here) to check what are the legal implications for this scenario.
Regards, -
Errors while loading Product master via HCI
Hello Experts,
We have been facing some issue while loading the product master via the HCI. Here is the reason taken from the log file:
REJECTION_CODE
REJECTION_CODE_NAME
REJECTION_DESCRIPTION
140
Inappropriate use of special character
Special characters are not allowed
We took the same records and loaded through the flat file and they were successful and can be seen in excel ui
We also checked for any inappropriate characters which are not allowed but we couldn't find any.
How should we load the data via the HCI with no errors?
Any help would be highly appreciated.
Thanks
KaranYS
We are also just getting the same error message as Karan. This issue, for Kraft, just started this week. We looked at the SAP note that you poated and it does not help as it tells us to add code to remove special characters. There are none in the source table in ECC.
The issue is that we have made no changes and this error has started to hit us.
We upgraded to Patch 7 of the HCI Agent this pas weekend. Is that a possible driver of this issue?
-Jeff -
Error while uploading Product master with LSMW Idoc method using XIF
Hi Madhura,
Please check it out the length of material field and maintain the guid for the product , check it out the atatus maintained to maintain the product i.e insert(I) or Update(U).
Regards,
Naveen
Edited by: Naveen Kumar on Jul 7, 2009 4:35 PMHello,
I could identify the error. It was due to incorrect UOM. Problem resolved.
Thanks,
Madhura -
Error while updating any SAP / Customised AddOn Master Data Form in SAP B1
Hello Experts,
I am facing a unique Problem in my addon .I have created two Master Tables Forms and entered the data in that two forms and the entry is done alright.
But while updating that Master data system is throwing an error "Conversion Failed when converting the nvarchar value 'A001'
to datatype int (CINF) "
Here i have saved the Data as 'A001' in code field of MAster Data Table.
This error is showing even in SAP Item MAster or any MAster Type Forms.
This problem persist in all Master type Forms not the Document Type Forms.
Please suggest a solution for this error to rectify.
Thanks
Amit
Edited by: AmitSharma_061985 on May 30, 2011 8:51 AMHi Amit,
Do you have any customisations in your Transaction Notification proc on the company database? You'll get this error if you have an old version of this procedure and you are doing any validation with the object_type parameter (which used to be data type int but is now nvarchar).
See SAP Note 1298609
Kind Regards,
Owen -
While uploading the excel BOM to SAP in PRD getting the ABAP dump error not
Hi Experts,
While uploading the excel BOM to SAP in PRD getting the ABAP dump error not able to proceed further.
and if I visit ST22 t code it is telling that :RAISE_EXCEPTION and DYNPRO_NOT_FOUND.
PLease help.
Regards,
MohanHi,
Better ask this question in ABAP forums.
Regards,
Harsh. -
ERROR WHILE UPDATING TO INFOCUBE
Hi All,
I am using a flat file to load data from datasource into infocubes.The data reaches PSA tables with no errors but after the execution of DTP , the monitors shows up Error Updating to infocube, intitally I thought there could be some problem in the data format of certain fields in the flat file but everything looks to be correct, there are no errors in the transformation rules.
Here's the ST22 analysis :
what happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Termination occurred in the ABAP program "CL_RSAWBN_NAV_TRACE===========CP" -
in "DUMP".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 42
of the (Include) program "CL_RSAWBN_NAV_TRACE===========CM004".
I have been deleting requests from the infocube , datasources and deleting entries from PSA but always endup getting the "Error while updating to Infocube"
Have to figure out the solution as the planning team is waiting for me to copy the actual data to the plan cube
ThanksHi,
You should have the following format in the flatfile :
Considering today's date(18 Apr 2008) for example:
0CALDAY 20080418
0CALMONTH 200804
0FISCPER 0042008
0FISCPER3 0042008 (I think this can have additional periods as well, not sure though)
0FISCVARNT No idea about this.
Reward with points if helpful.
Regards
Hemant Khemani -
Error while updating data from DataStore object
Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PMHi Vijay,
I got this error:
Runtime Errors MESSAGE_TYPE_X
Date and Time 04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
been logged for this process.
System Response
No log has been written. The process (and consequently the chain)
has been terminated.
Procedure
If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea? -
RFC_ERROR_SYSTEM_FAILURE error while updating the sick leave in MSS
Hi Guru ,
We are getting RFC_ERROR_SYSTEM_FAILURE error while updating the Sick leave for team member from portal .
Please tell how to resolve this .
Dump part :
Runtime Errors MESSAGE_TYPE_X
Error analysis
Short text of error message:
System error
Long text of error message:
Technical information about the message:
Message class....... "HRTIM00BUFMSG"
Number.............. 001
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Information on where terminated
Termination occurred in the ABAP program "SAPLHRTIM00_TMWBUFFER" - in
"INITIALIZE".
The main program was "SAPMSSY1 ".
In the source code you have the termination point in line 55
of the (Include) program "LHRTIM00_TMWBUFFERCB5".When an RFC fails from the portal to an SAP Backend, probably ECC 6.0 in your case, there are a few options that I use to troubleshoot:
1. Ensure that all your jco's are set up ok, passwords, ect. JCOs do not appear to be the problem here
2. Have an ABAP programmer review where the RFC is failing on the Backend System
3. Set up an External Breakpoint in the backend RFC. Step to do this:
a. Get the Backend UserID of a test portal user that is having this issue.
b. Ensure that test user has "Debug Display" access in the Backend System
c. Log into the Backend system, go to SE 37 and display your RFC
d. Go to Utilities --> Settings --> Debugging in the top menu and add the Test User ID to the "Users" field.
e. Set an external breakpoint any where you want in the RFC.
f. Run the Leave request as the test user.
g. a new SAP GUI screen will popup once it hits the breakpoint. The portal browser will stay frozen until you step thru the ABAP program.
Option 3 may sound like alot at first if you never used it, but if you are responsible for troubleshooting portal issues like this one, it is a skill you must have. You can also have an ABAP resource responsible for external debugging when you come accross issues like these. It helps you see exactly what data is being passed in from the portal and what is happening to cause the error.
Regards,
Tom -
Dump error while running termination action
I'm facing a dump error while running termination action, please, if some one wud help me out of this error. here when im termination action the system is opening action infotype when given the date of termination and try to save, system shows a warning message that "Record valid from 08.08.1995 to 31.12.9999 delimited at end" then I press enter and system is asking me to save. when I do so, rather than it taking me to another screen its throwing a dump error.
Runtime Errors SYNTAX_ERROR
Date and Time 21.10.2008 18:54:05
Short dump has not been completely stored (too big)
Short text
Syntax error in program "SAPLCACS_BU_PARTNER ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLCACS_BU_PARTNER " in
include "LCACS_BU_PARTNERU44 " in
line 19:
"The key of internal table "LT_BUT0BK" contains components of type "X" "
"or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted fo"
"r such tables in a Unicode context."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLBUD_CHECK" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Error analysis
The following syntax error was found in the program SAPLCACS_BU_PARTNER :
"The key of internal table "LT_BUT0BK" contains components of type "X" "
"or "XSTRING". The "READ TABLE LT_BUT0BK" statement is not permitted for
"r such tables in a Unicode context."
ger Location of Runtime Error
Program SAPLBUD_CHECK
Include LBUD_CHECKF01
Row 1.129
Module type (FORM)
Module Name RLDEL_CHECK
ce Code Extract
SourceCde
9
0 *------ ... Funktionsbausteine ermitteln -
1 CALL FUNCTION 'BDT_TBZ1F_GET'
2 EXPORTING
3 iv_objcn = gc_objcn_bupa
4 iv_objap = gc_objap_bupa
5 TABLES
6 et_tbz1f = lt_tbz1f
7 EXCEPTIONS
8 not_found = 1
9 OTHERS = 2.
0 READ TABLE lt_tbz1f INDEX 1.
1 IF sy-subrc = 0.
2 CALL FUNCTION 'BUP_PARTNER_GET'
3 EXPORTING
4 i_partner = is_but100-partner
5 i_cp_exclude = gc_x
i_is_exclude = gc_x
PORTING
e_but000_int = ls_but000_int
CEPTIONS
OTHERS = 1.
... Funktionsbausteine aufrufen -
T lt_tbz1f WHERE ztpkt = 'RLDEL'
AND NOT fname IS INITIAL.
Datümer alt = neu = SPACE => Löschung, sonst Update -
(Einschränkung der Gültigkeit)
FUNCTION lt_tbz1f-fname
PORTING
i_partner = is_but100-partner
i_partnerguid = ls_but000_int-partner_guid
i_role = is_but100-rltyp
i_dfval = is_but100-dfval
i_calltp = iv_calltp
i_valid_from = is_but100-valid_from_dats
i_valid_from_old = iv_valid_from_old
i_valid_to = is_but100-valid_to_dats
i_valid_to_old = iv_valid_to_old
PORTING
e_result = lv_result.
... Ergebnis merken, wenn höher als bisheriges Zwischenergebnis-
v_result > gv_wu_result. "#EC PORTABLE
wuresult = lv_result.
F.
... Ergebnis ist 'Nicht löschen': Zeitpunkt abbrechen -HI Mallik,
for termination action the operation that i've set is
lis9 0001
cop 0002
lis9 0007
cop 0008
lis9 0014
lis9 0015
lis9 0587
so just want to know if the set format for termination action is right
and other option is that if there is some change to settings of infotype charateristics in table v_t582A this may cause change in the date that is cause of error.
can u please suggest the above alignment of operations and infotype is right and provide me the idle settings for infotype characteristics which may solve my query.
thanks mallik. -
Dump error while creating or double click the info package
Hello experts,
I have actived infocube 0FIAR_C03 in BI content. Ago, The creation infopackage have been deleted in the past , today, I created a infopackage, while I update mode selected u2018initialize delta processu2019, then click save button , the system prompt u2018Deltas already loaded for request REQU_D64R47LDUSZHY9CBIB86WMLFJ init.selection; no 2. initu2019, I canoti save it for my setting. Why is this?
Then I have search cause in SDN, and I have reference OSS Note 852443 to do .
Note 852443 have mention some table: RSSELDONE、RSSDLINIT、RSSDLINITSEL、ROOSPRMSC、ROOSPRMSF.
I have to delete that request of record using se16 in these tables: RSSELDONE、RSSDLINIT、RSSDLINITSEL.
in my BI 7.0 system, ROOSPRMSC、ROOSPRMSF is no any data.
I was no found delta queue in RSA7.
Now . Dump error while creating or double click the info package, how can I change this?
Please let me know the solution.
Thanks for your help.
Best Regards
SteveHere are some links which deals with same issue.
Re: Dump In Infopackage
Re: Getting into Short dump at the time of selecting InfoPackage to execute for
Short dump while performing init in infopackage
Re: Infopackage going into short dump
Thanks. -
Dear bw gurus,
I have encountered a load problem. The source is a DSO and the target is Infocube. When i execute the DTP (DSO->Infocube), it hits an error. There is no error log and nothing in the error stack. The error from the monitor was right after the data package execution saying 'Error while updating Infocube XXX'.
I tried to check tcode SM21 and ST22. No system log and short dump at all. I have tried to run in debug mode (Simulation), nothing is wrong with the transformation (start and end routine) code
Appreciate if you can provide me some hints on this. I hope to resolve this as soon as possible. I need to get this cube loaded for the UAT in 3 days time.
Thanks.Hi Krishna,
I have checked the Background job, no error at all. This error is at the updating level. Thanks!
Hi Sri
We are using support package level 0017 (SAPKW70017). Can i know what issues you have for DTPs? Is it the same issue?
Thanks a lot!
Regards,
Dianna -
Error while updating pricing item
Hi All,
I have an issue to ask, the problem is this issue not happen every time, and sometimes it can solved it self.
We are using SRM 5.0
SRM_SERVER 550 0008 SAPKIBKT08 SRM_SERVER
SAP_AP 700 0008 SAPKNA700 SAP Application Platform
Its about Error while updating pricing item 49ABA6C4998216D9E1000000AC103B65 (document 49ABA6CE998216D9E1000000AC103B65) which i found in SLG1 and SM53.
When this issue occured, all transaction cannot be process, like : transfer ext requirement from R/3 to SRM --> failed , then when generate PO from accepted quotation , the PO net price will be zero.
All the error is the same, error has occured in pricing.
I already check using program
RSVMCRT_HEALTH_CHECK and BBP_CND_CUSTOMIZING_CHECK , IPC is running and all java enviroment message status = green, but if i simulate using a product, it will show error in pricing.
Can you please help to advise if any of you ever facing the same error, your respond will highly appreciated.
Regards,
w1nHi,
I think buffer has old condition.
Please run the Function Module IPC_DET_CLEAR_CUST_BUFFER.
OR reset the VMC -> Reset in SM52.
Regards,
Masa
Maybe you are looking for
-
External hard drive error / disk utility not repairing
I am having problems with a particular external hard drive. Device is a Transcend StoreJet 25M (640GB) currently formatted in Mac OS Extended (Journaled). It was previously formatted in FAT32, exFat, and also Mac OS Extended (Journaled). It started g
-
How to insert data into database table from a servlet? Help please.
From a servlet I want to insert a message with some servlet parameters into an oracle database table by writing 'insert into tablename'. How shall I write the sql statement?
-
Hello people, I can't update iPhoto after installing OSX 10.9.2, it has the name otto@**** in the apple ID box and will not let me change it. Any thoughts? Thanks <Email Edited By Host>
-
IPhone 4 no longer syncs with Outlook
Until a few days ago I was able to use iTunes to sync my iPhone 4 contacts and appointments with Outlook. I used a USB cable, and the sync was completed quickly and correctly every time. Now iTunes hangs during the sync process most of the time, an
-
Change the Value of column of the internal table at run time
Hello Experts, With the below code i am able to determine the value hold by internal table at run time for a sepcific column but i am not getting the way of how to update the internal if one of the value is changed, lr_desc_table ?= cl_abap_typedes