ABAP dump in ECC 6.0 - Need OSS notes

ABAP dump is coming when retriving data between select-endselect.
Runtime Errors DBIF_RSQL_INVALID_CURSOR
Except. CX_SY_OPEN_SQL_DB
The problem cannot be resolved without correcting the application
program.
The statements MESSAGE, COMMIT WORK, ROLLBACK WORK, CALL SCREEN,
BREAK-POINT, WAIT, CALL FUNCTION ... DESTINATION, CALL FUNCTION ...
STARTING NEW TASK, RECEIVE RESULTS, CALL SELECTION-SCREEN, CALL
DIALOG, CALL TRANSACTION cannot be used within a database
loop.
You can collect the data needed for these statements together in an
internal table and process them
in a loop.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_INVALID_CURSOR" "CX_SY_OPEN_SQL_DB"
Can you please give the OSS notes no. if anything is available.

Hi Sreedevi..
In the dump report, the piece of code where the dump occured will be shown
something with >>>>>> sign in the line...
Please copy and paste this peice of code..
Thanks and Best Regards,
Vikas Bittera.
**Reward if useful**

Similar Messages

FB60 layout needs OSS Note

Hi All,
FB60 entry layout needs to be correct to pre 6.0 Keying the screens as is, is very time consuming.
I have a ticket to reduce the size of the assignment field.
Needs OSS Note for the Layout to be correct.
Thanks in Advance
Prathap

Hi All,
FB60 entry layout needs to be correct to pre 6.0 Keying the screens as is, is very time consuming.
I have a ticket to reduce the size of the assignment field.
Needs OSS Note for the Layout to be correct.
Thanks in Advance
Prathap

Need OSS Notes on CIN and Pricing

Hi SAP Guru's,
I need OSS note on CIN and Pricing. Can any one send to my mail id i.e., [email protected]
Thanks in advance,
M.Prakash

The following are the OSS notes.
get into service portal and do it as per instructions
1032265 Budget 2007-Legal implications
1040067 Budget 2007-08 changes for Monthly utilization(J2IUN)
1049307 Addition of SECess duty in transaction J2I9 -
1045888 Budget 2007-08 : SECess in Register reports excel format
1044624 Budget 2007-08 changes to j1idepotstock1
1039397 Budget 2007-08 changes for SECess inventory(To formula 365)
1053479 Budget 2007-08 changes for transaction J1IFR
1055370 ER1: Changes for SECess as per budget 2007-08
1040573 Budget 2007 Changes for J2I8
1040241 Incorrect calculation of Sec & Higher Education CESS in J1IG
Reward points if useful
Regards,
Anbu

ABAP dump in ecc 6.0 for F110 transaction

HI All,
We have recently upgraded to ECC 6.0 from 4.6C.
While displaying the proposal/exception list using F110 transaction for the program RFZALI20. The ABAP dump says "Unable to interpret "1 5D " as a number". It is failing for Key for print parameters (PRI_PARAMS-PRKEYEXT).
Has anyone faced this issue?
Thanks in advance.
-APK

HI Balaji,
We could get over this issue by changing the print parameters in the variant we have used.
The variant had some print parameters selected (having green check) even though there are no parameters which are selected. So, I have created a varaint without the print parameters option checked (no more green check in the extended selection).
Hope this is clear.
-Pradeep

Need OSS note

Hi,
I am presently working on SAP ECC 6.0.
The script F_RFKQSU40_10 is not been updated with the latest version and some suitable OSS notes need to applied to update this form.
Right now in my client server i can see only 11 page windows. But in the latest version there are about 39 page windows were available.
please let me know the suitable OSS note to update the form. Thanks in advance.
I have already checked in sap market place. But unable to find better one, except these notes ...
459363
808104
670407
492783
454478
386974
- Raj

You should check in client 000, right ?
standard scripts are available in 000, and to all other clients, if u need, you should do client copy.
check in client 000. maybe that one have the updated version. if that has, you can client copy it to ur client.

Facing ABAP dump in program SAPLGRAP that ABAP_2_DAT does not exist

We have an IDES ECC6.0 installation. We are facing some ABAP dump whenever any activity which involves a list is performed.
Eg: When in SU01 you click on user field and press F4 to get the list of present users, it shows following dump:
( Error in the ABAP Application Program
The current ABAP program "SAPLWDTM" had to be terminated because it has++
come across a statement that unfortunately cannot be executed.++
The following syntax error occurred in program "SAPLGRAP " in include "LGRAPFGL" in
line 1203:
"The FORM "ABAP_2_DAT" does not exist."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "AICAMT "
Error in the ABAP Application Program
The current ABAP program "SAPLWDTM" had to be terminated because it has
come across a statement that unfortunately cannot be executed. )
The WS_DOWNLOAD module itself is missing. Any idea on this?

Hi Uday,
Thanks for your responce.
The ECC6.0 system is at EHP 1 SP 14.
SM21 log shows the following:
Run-time error "SYNTAX_ERROR" occurred.
The details of this error is the same as mentioned in the previous post i.e
the FORM "ABAP_2_DAT" could not be found.
Regards,
Kushal Agrawal

GL open items report needs OSS Note

Hi All,
Report S_alr_87012282 is run at period end and year end to validate that A/P 21010000 is in balance against the open items report. For the 7th period (12/13/08) I could not run the report as it timed out. If you run this in the background there are 100,000 pages and you can not see the last page. I need a resolution for this report as accounting said I have to use to balance.
I tried in foreground and it still timed out. I recommended FS10N,Please provide the OSS for any performance improvement notes.
Thanks in Advance
Prathap

Hello everybody:
I need open clearing items to clearing with other items. For example in my job was issued a payment to a supplier, but was applied to the wrong invoice, for this reason I need to open this compensation payment and apply it to the right invoice, the Tx FBRA, tells me that I must cancel the payment, but the payment was delivered and collected by the supplier, so I can not avoid it and just need to open the clearing.
Can us help me please????
Thanks
María

PNP_Report(Showing ABAP Dump)

hi,
i have created one ALV report(using PNP Log. database)and using standard selection screen ..
the problem i am having is in runtime it showing ABAP DUMP Error called "NO_FIELDCATALOG_AVAILABLE"..
and also i am not able to Apply check on the selection field of the standard selection screen...
so need help on that..plz ...i am new to PNP Stuff...
thanks in advance...

thanks for response..one more problem i am having is i am applying checks on Standard selection screen...can this can be done if yes then plz suggest how...
and regarding my ABAP Dump problem if i Specify GET PERNR statement in INTIALIZATION Event then it ALV Report work fine..but not picking up the data from Standard Selection screen which is must..and if specify same GET PERNR in Start-of-selection event then it gives this ABAP DUMP "NO_FIELDCATALOG_AVAILABLE"..AND not PICKING up the data from selection screen..
Plz suggest any help i will be greatfull to you..
Thanks in advance....

SAP OSS NOTES

Hi experts!
I don't understand very much how can I know if a SAP note is applicable or not for my system. I know that if I go to System -> Status -> Component Information I can see the realease and level of the support package but in the note I see an specification of the release and version of the support package... that is the part that I don't understand very much... That means if the version is higer in the note and in the system the version is minor the note is applicable? I'm correct?
Thanks for the help!

Hi Carlos, pls chk this.
OSS notes describe bugs/issues/problems in SAP software, provide the technical details and correction instructions.
Notes also sometimes cover 'features' (ie things that are not bugs) that cause ambiguous application behavior. Additionally, specific information relevant to releases, SAP strategy (eg when is support to a particular version going to end) regarding its products and so on is also provided via notes.
You have a search portal for SAP Notes which will tell you more about it.
You would a S-user id to logon to the OSS Notes. The S-user id is basically based on the installation number of your SAP system. You can get the user id from your BASIS. Once you get this then logon to this link:
http://service.sap.com/notes.
Check this:Re: oss
Also check this document. It has the step by step procedures with screenshots to apply a Note.
http://www.sappoint.com/basis/snote.pdf
first you should have oss id then you can see oss note here
https://service.sap.com/notes
take a look thread
oss
oss note is a document provided by SAP that described particular issue, usually with symptom, cause(the reason), solution provided, and some other info (correction instruction and code).
oss note has version, date issued, and categorized to application area (e.g BW, CRM, etc).
in practice, when error occured, normally there will be error number and message, that can be used to search oss note which in return may provide possible solutioon. some problem will have short dump, and in the dump, there is suggestion to search oss note with using keywords specified(program name, module name, etc.)
cheers,
Hema.

A lower OSS note dependent on higher OSS note

Hi All,
Our team is trying to implement a OSS note, say #12345 via txn SNOTE and noticed that it pops up asking to implement #22222. It triggers some thoughts among ourselves.
Is anyone able to advice why or under what sort of circumstances would a lower OSS note be dependent on a higher OSS note?
Shouldn't a OSS note only need OSS notes that are lower than it is to satisfy its pre-requisite?
Thanks.
Regards,
Annie

Hi Annie,
Sorry for my late reply.
If you will go to your 1st note and click on
SAP_HRCAU
600
600
1612289
correction instruction, a new windows will be opened and it has only one pre-requisite note, that is your note number 2.
So, all is good then
Regards,
Divyanshu

What is OSS note?

hi,
Can u plz explain what is a OSS note?
why do we need this? i mean when do we get the requirement for OSS notes?
Regards
Vaja

Hi,
OSS notes are corrections/fixes found in the SAP service marketplace.
There are two ways to connect to the notes search system.
These are:
1. The <a href="https://websmp103.sap-ag.de/notes">Web Frontend</a> via your browser.
2. The SAPGUI for Windows frontend via transaction OSS1 in your SAP system. [must be preconfigured by your system administrators]
The notes contain instructions and in some cases code corrections. The code can be applied manually via the developer tools or via transaction SNOTE which will try to automatically step you through the application process.
Where the correction is complex and/or not a high priority it maybe that the code is delivered in a Support package and no "advance" code is provided. In this case you have to apply a collection of fixes together at once. This is usually done by your system administrators.
Also you will find all the needed information in the note assistant guide
http://service.sap.com/note-assistant -> Note Assitant Tutorials ->
Documentation Note Assistant (en).
Once you have access to the snote transaction, you must get the needed OSS note into the transaction in some way. You can do this directly if you have an OSS link to SAP by using the download function, or you can download the OSS note using the SAP Download Manager and uploading the note into snote. Once the OSS note has been made known to snote in some manner, an entry line showing the note number and topic will appear on the main snote screen. There will be an icon to the left of each displayed line. In order to apply the OSS note in your SAP instance, the icon must show as a black arrow head on a blue background.
Also this is one very useful link which would explain you further regarding SNOTE .
http://www.sapdevelopment.co.uk/tips/tips_snote.htm
Regards,
Ferry Lianto

R3tr objects changability oss notes ?

Hello BW Experts,
What is the sap notes to make the queries, process chains and infospokes changable in production..
Thanks,
BWer

hi BWer,
i think no need oss note
go to rsa1->transport connection->there is button 'object changeability'
here you can switch between changeable or not
hope this helps.

Need Help : Native SQL ABAP dump "DBIF_DSQL2_SQL_ERROR" on procedure "APS_ORDER_CHANGE".

Hi All,
We are facing an issue and want to check if you have seen it in past and can help us in resolving it. Any input will be greatly appreciated.
Issue:
While executing product heuristic on few product/location combinations in product view, we encounter native SQL ABAP dump “DBIF_DSQL2_SQL_ERROR” on
procedure “APS_ORDER_CHANGE”.
We were debugging for one particular product/location combination, this combination has 2 planned orders, and the Internal order number of these planned orders are
given as input to this procedure “APS_ORDER_CHANGE”. These 2 internal order numbers are the only inputs given to this procedure.
When we try to delete those planned orders we again encounter same ABAP dump. There are many product/location having the same issue.
We also checked variable duration maintained on the PPM of this product/location, and was fine.
For more deatils : Please check the attached document of downloaded ABAP Dump.
Thanks and Regards,
Pritesh Jain

Hi Pritesh.
What liveCache version/build/patch are you on? What is the database error text shown in this dump?
If it is exactly the one below
Database error text........: "POS(1) Work rolled back: tExcept 30730 in
APS_ORDER_CHAN"
You can try running report SLCA_EMERGENCY_SWITCH, then turning off the option "Verify that all input table records have been read" and saving the results. If that solves the issue, you can use this as a workaround until the next time you upgrade your liveCache build.
To get a clear root cause, you may need to create an OSS incident under BC-DB-LCA component providing a reproducible example.
Regards,
Tiago

Need to create ABAP proxy in ECC 6.0

Hi All,
I need to create Abap proxy in ECC 6.0 .Tha actual senerio is iam getting data from XI in XML format and i need to validate and update the date in the ZEE table fields respectively.i need to Modularize the class and keep the validation part separate. we should do validation framework for custom Master Data objects which can be turned On and Off. This can be used as a common framework for all master data validations.can any one guide me how to create abap proxy from staring till end ...Thanks in advance ...
Regards,
SRIram

Hi,
I got these below steps from SDNforumonly ..i do not have the link however i have the steps:
1.check Delivered Languages service.sap.com/languages.
2.check note 42305
3.In transaction SMLT , Choose Classify Language (Language symbol or F5 )
4.Supplement this language with English or German (Recommended)
5.The language must be defined in the instance profiles so that you can log on in these languages. The relevant parameter is
zcsa/installed_languages.
6.Go to the language for which you want to install extra packages and choose or choose Language --> Import Package
7.in the next screen , enter the path for language packages.
8.start immediately or schedule it .Optionally you can use the target server to exceute this ( to avoid performance issues
,if you are importing in production timings, and you cna exculde this server from logon group )
9.if any problems in importing then analyze the log and restart the import .
10.After importing the languages, you must also import the language data in the Support Packages.Choose Language --->
Special Actions ---> Import Support Packages
11.Go to the language that you want to supplement and choose or Language ---> Supplement Language(this is client specific ,
so execute for each client in your system)
And also to the above if your system is running on non unicode you need to install the code pages (example AIX locale command) .
Thanks.

ABAP dump CONVT_CODEPAGE in ECC 6.0

Hi,
In ECC 6.0 the following error is coming while reading data from Unix file.
Runtime Errors CONVT_CODEPAGE
Except. CX_SY_CONVERSION_CODEPAGE
The termination is caused because exception "CX_SY_CONVERSION_CODEPAGE"
occurred in
procedure "GET_DATA_FROM_UXFILE" "(FORM)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The program logic for opening dataset and reading is as shown below, dump is coming while reading dataset.
OPEN DATASET INFILE FOR INPUT IN TEXT MODE ENCODING DEFAULT.
DO.
 READ DATASET INFILE INTO WA_workarea .
ENDDO.
Do we need to change the read command to avoid this dump in ECC 6.0?
Thanks,
Sreedevi

I think syntax Open dataset option ENCODING DEFAULT in unicode system expects a file in UTF-8 encoding.
It's dumping because read dataset failed to convert a character in the fil to UTF-16.
You need to convert to UTF-16 before transfer
try.
 call method cl_abap_conv_in_ce=>create
 exporting
 encoding = gv_encoding
 endian = gv_endian
 replacement = '#'
 receiving
 conv = conv_obj.
 call method conv_obj->convert
 exporting
 input = gv_xstr
 n = -1
 importing
 data = gv_str.
catch cx_root.
 message 'Error during conversion' type 'E'.
endtry.
aRs

ABAP dump in ECC 6.0 - Need OSS notes

Similar Messages

Maybe you are looking for