ABAP Dump is encountered when doing the negative subsequent adjustment
Hi Experts !!!
An ABAP Dump is encountered when doing the negative subsequent adjustment (posting a 102 movt type) on a Purchase Order via the Z function module. The dump only happens if the scenario satisfies the following conditions:
1.Material is either (but may not be limited to) 3000000234, 4000000121, 3000000210 (These are the only reported materials)
2.Order unit in Purchase Order is in MT
3.At 2nd weigh, Net Weight is less than PO Order Qty.
Note: No error occurs if same process is done via MIGO.
Initial Analysis:
An exception/error occurs when calling function u201CMB_CREATE_MATERIAL_DOCUMENT_UTu201D .
Please see below error anlysis report from after executin Zfunction module code.
Error analysis
Short text of error message:
Material 3000000234 / US01 Column 0001: MSEG-BPMNG not in quantity table
/not consistent
Long text of error message:
Diagnosis
Before the system posts a material document for an HPM/TDP material
(MARA-CMETH = 1 or 2), it performs the following consistency
checks:
o For each unit of measure in the Unit of Measure Group
(MARC-UOMGR), a line item has to be present in the additional
quantity appendix table (Table MSEGO2)
o For each unit of measure in the main core table MSEG that is
not initial a line item, has to be present in the additional
quantity appendix table (Table MSEGO2) and the corresponding
packed format quantities have to be identical.
This way, inconsistent stock level updates can be prevented.
System Response
The system stops processing.
Procedure
If the error is reproducible, contact your system administrator.
Procedure for System Administration
The inconsitency can have several reasons, for example:
o Incorrect postings from external systems using function module
MB_CREATE_GOODS_MOVEMENT
o Handling errors
o Application programming errors
Technical information about the message:
Message class....... "O3"
Number.............. 359
Variable 1.......... 3000000234
Variable 2.......... "US01"
Variable 3.......... 0001
Variable 4.......... "BPMNG"
Please let me know,if you want some other details.
Problem Issolved
Similar Messages
-
ABAP Run time error when display the Customs Export declarations
Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar type /sapsll/corpar_t
lt_corpar_ht type /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
"/SAPSLL/CUHD_LOAD_SELECTION".
The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
In the source code you have the termination point in line 144
of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep MaddiHi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors ITAB_DUPLICATE_KEY
ABAP Program /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep -
Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?
-
Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall 272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall 405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall 892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall 689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
[move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1) -
WHEN DOES THE IPHONE 5 COMING OUT IN SOUTH KOREA?
WHEN DOES THE IPHONE 5 COMING OUT IN SOUTH KOREA?
When it is announced by Apple. No one here would know. Go to Apple.com and watch the press releases to see when it will happen.
-
Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi or contact your service provider to change your service plan. Regards,Sunil K
sunilkesavareddy wrote:
Hi Team, I have a problem configuring email and using internet from my blackberry device. I have purchase this divice and got my Blackberry plan activated from Airtel. I have followed up with service provide and could see that they have activated and has no issue from there side. Let me know why this issue persists. Error 1: while trying to configure emailActivation failed. An error was encountered when sendig the activation transmission Error 2: Whild using internet.Browsing over the mobile network is not included as part of your current sercie plan. To browse the web, you must use Wi-Fi or contact your service provider to change your service plan. Regards,Sunil KAre you sure you are connected to a BIS plan (BlackBerry Internet Service) ? Regular data plan will not work, ask Airtel if it's a BIS plan. -
How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized
How and When Does the attribute VI_ATTR_VXI_TRIG_STATUS get initialized. Do the actual trigger lines get measured or does the attribute get initialized to a default value when the vxi resource manager is executed?
Hey whl6868,
According to page 157 (or 3-135) of the manual (http://www.ni.com/pdf/manuals/370132c.pdf), there is no default value for VI_ATTR_VXI_TRIG_STATUS. If Resman is returning valid values for it, then it must be actually reading the lines. Else, I would only expect it to return valid values when you actually call the function yourself.
Regards,
David R
Applications Engineer
National Instruments -
Move order number when doing the pick release
hi everyone ,
is there any way to specify the move order number when doing the pick release process
i wante to passe the move order number to the pick release API procedure
or is it possible to change it after doing the pick release
best regardsUses MTL_TXN_REQUEST_HEADERS_S sequence to generate the move order number in, I believe, when-validate-item tirgger.
Thanks
Nagamohan -
If I download a movie today, but will not be watching it for a few weeks (i.e. when overseas) - when does the 'activation' period start? Do I have 48 hours from the download date or when I first watch the movie?
You have 30 days from when you download it, but when you then start watching it you have 48 hours (24 if your account is US based) to finish watching it before it expires.
-
when does the test time start? After installing the program? Or only after opening the program? background: I accidently installed the Photoshop test version, but O am still busy with testing Premiere Pro.
Freialeben7 the evaluation period begins when you first launch the Adobe application you are wishing to evaluate.
-
When does the horizontalScrollBar get created on a List?
When does the horizontalScrollBar get created on a List?
The scroller is created, but the scrollbar isn't created yet and I get an error:
I have a spark List:
<s:List id="list" creationComplete="creationCompleteHandler(event)">
<s:layout>
<s:HorizontalLayout />
</s:layout>
</s:List>
private function creationCompleteHandler(event:FlexEvent):void {
(event.currentTarget as List).scroller.addEventListener( FlexEvent.UPDATE_COMPLETE, onScrollerComplete );
// these don't trigger anything!
// (event.currentTarget as List).scroller.addEventListener(FlexEvent.CREATION_COMPLETE , onScrollerComplete );
// (event.currentTarget as List).scroller.addEventListener(Event.ADDED_TO_STAGE , onScrollerComplete );
private function onScrollerComplete(event:Event):void {
// horizontalScrollBar still null at this point - how can I use it?
// I want to set the style, but it's not created yet!
// event.currentTarget.scroller.horizontalScrollBar.setStyle("repeatInterval", 600);I just realized that
this.setIconImage(new ImageIcon("image.jpg").getImage())
did not create the icon for my saved files.
So what did create it? I did not program it!
However, I happen to have an icon file Ananya.ico where I have my java project. I use if for my installation file. Did Java use this icon?
Please help! Thanks! -
I just upgraded my data plan from 6GB to 10GB for the same rate of $80 per month. Is this a promotion? If yes, when does the promotion end?
In most cases you keep the same plan and promotions even when you upgrade the phone. There are exceptions for very old plans and unlimited data, but essentially mrhelper is correct. You have option to "keep current plan" when upgrading. so in most cases, your statement that you will go back to $100 for 10 GB when upgrading is incorrect. What was your particular circumstance?
-
My iphone gets stuck when doing the back up of the IOS 5. What should I do? Any ideas?
I'm having the same issue on the 3Gs. I get a message "an error occurred while backing up this phone (-43)." It tells me if I continue the contents of the phone while be deleted. Is it safe to continue and restore from my current backup? I can do a manual backup without any issues.
-
When does the Java main(String args[]) method exit?
Hi all,
I and my colleagues want to know, when does the main() method exit?
we wrote a small code as follows:
import java.awt.*;
public class Test {
public static void main(String[] args) {
Frame f = new Frame("hi");
f.show();
System.out.println("after show");
and ran the program, in which case I could see the printed message "after show", but although there is no code after the System.out.println(), the Java virtual machine does not exit and waits for the Frame to close.
My question is has the main method exited in this case? since it clearly shows that it does not have any more code to execute. Does java create the main method as a thread or as a process?
regards,
HarshadTo make your application terminate you need to add code to cause the AWT thread to handle the termination. In your code, before f.show(), try:
f.addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
dispose();
public void windowClosed(WindowEvent e) {
System.exit(0);
});Now, at least you can click on the little "X" on the upper right-hand corner of the Frame (at least in Win95/98/NT) environments) to cause your application to receive a window closing event. It is also possible to add a menu with an option to exit; in that case I'd use an EventQueue to cause a window closing event to be sent. -
When does the JSP get regenerated!!
Hi,
Can anyone please tell me When does the JSP get regenerated!!
Thanks in advance
SP
[att1.html]Answered on interest.jsp
(please don't cross post)
mbg
=============================================================
"SP" <[email protected]> wrote in message
news:[email protected]..
Hi,
Can anyone please tell me When does the JSP get regenerated!!
Thanks in advance
SP
Maybe you are looking for
-
Buzz/hum when connected to krk studio monitors
ok so i have an imac (3.06 ghz intel core duo). i had a klipshe 2.1 speaker system connected with no problems. then i bought a pair of krk rokit 6's studio monitors and just have a whole lot of humming now. so far ive connected headphones to my imac
-
Data Integrator import XSD / DTD error
Hi experts, Really need your help here! I am trying to import an XSD or DTD schema into BODI. I have both the XSD and DTD which I generated from the XML source file, using Altova XMLSpy. BODI is allowing me to select the root element, but when I r
-
HT1430 What to do if the message shows "cannot activate iphone" after updating ios5?
After updating to ios5, got the message "no sim card". I turn off and restart, then reset language, country or region, connect to itune, "cannot activate iphone" I dont know what's going on?
-
Exported image but is extremely grainy?
I have recently installed LR5 and have been watching lots and lots of tutorial and have got a basic understanding of how to do things but when exporting a photo to JPEG and opening this it is extremely grainy and terrible quality. I did notice while
-
Can Synology NAS serve both time machine backup and video/audio servers?
I'm looking for a NAS box such as Synology 2 bay solution. I've seen the box can be used as Samba server to store network folders and files; and also there is discussions on Mac Time Machine backup using the Synology boxes; I'm wonder if the RAID dis