ABAP dump while executing transaction *PC00_M99_CIPE*
Hi,
Getting ABAP dump while executing transaction PC00_M99_CIPE ,hence cannot do payroll posting .
Information on where terminated
Termination occurred in the ABAP program "CL_HRFPM_CD_CLOSING_HANDLER===CP" -
in "GET_FM_POS_CHECK_DATA".
The main program was "RPCIPE00 ".
In the source code you have the termination point in line 13
of the (Include) program "CL_HRFPM_CD_CLOSING_HANDLER===CM00E".
We have recently upgraded our patch level.
SAP_OCS(SPAM/SAINT) SAPKD70026 SAPKD70033
SAP_ABA SAPKA70012 SAPKA70018
SAP_BASIS SAPKB70012 SAPKB70018
PI_BASIS SAPKIPYJ7B SAPKIPYJ7I
SAP_BW SAPKW70012 SAPKW70020
SAP_AP SAPKNA7008 SAPKNA7015
SAP_APPL SAPKH60009 SAPKH60015
SAP_HR SAPKE60028 SAPKE60039
EA-HR SAPKGPHD07 SAPKGPHD26
Kindly guide me.
Regards,
Rachel
thanks for the quick response.
By applying note 1137655,problem got resoved.
FORM CHECK_CMTNT_UPDATE_CLOSED
Delta001
Context Block
FORM check_cmtnt_update_closed
USING
u_key_date TYPE begda
CHANGING
c_flg_cmtnt_closed.
Delete Block
DATA ls_encumb_iv TYPE t77hrfpm_encumb.
DATA l_gsval TYPE t77s0-gsval.
DATA ls_fm_pos_key TYPE hrfpm_fm_doc_pos-key_pos.
DATA lx TYPE REF TO cx_hrfpm.
STATICS so_closing_handler TYPE REF TO cl_hrfpm_cd_closing_handler.
CLEAR c_flg_cmtnt_closed .
*--- old switch from note??? active?
*--- if so: use the old logic
cl_hr_t77s0=>read_gsval(
EXPORTING
grpid = 'HRFPM'
semid = 'CHKAC'
IMPORTING
returnvalue = l_gsval ).
TRY.
IF NOT l_gsval IS INITIAL .
TRY.
c_flg_cmtnt_closed = 'X'.
Insert Block
DATA: ls_encumb_iv TYPE t77hrfpm_encumb.
STATICS:
s_gsval TYPE t77s0-gsval,
s_gsval_read TYPE flag.
IF s_gsval_read IS INITIAL .
SELECT SINGLE gsval
FROM t77s0
INTO s_gsval
WHERE grpid = 'HRFPM'
AND semid = 'CHKAC' .
s_gsval_read = 'X'.
ENDIF.
CLEAR c_flg_cmtnt_closed .
TRY.
c_flg_cmtnt_closed = 'X'.
Delta002
Context Block
CATCH
cx_hrfpm_db_operation
cx_hrfpm_ad_customizing .
Delete Block
ENDTRY.
ELSE.
*--- using closed period functionality of PBC
IF so_closing_handler IS INITIAL .
CREATE OBJECT so_closing_handler.
ENDIF.
IF so_closing_handler->consumption_in_closed_period(
i_key_date = u_key_date
is_fm_pos_key = ls_fm_pos_key )
IS INITIAL.
c_flg_cmtnt_closed = 'X'.
ENDIF.
ENDIF.
CATCH cx_hrfpm INTO lx.
lx->raise_sy_message( ).
ENDTRY.
ENDFORM. "check_cmtnt_update_closed
Insert Block
ENDTRY.
ENDFORM. "check_cmtnt_update_closed
Similar Messages
-
ABAP DUMP While doing GI Through Zmovement type in MIGO Transaction
Hi ,
We have migrated from FM FBS to BCS from 12.01.2015.
And we are using 101 profile with GR and IR update.
We received blow ABAP Dump while doing the GI through MIGO Transaction.
Can you please help on this.
Dump detatils
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_X
ABAP Program CL_BUAVC_ENTRY================CP
Application Component PSM-FM-BCS-AC
Date and Time 13.01.2015 09:10:00
Operating system..... "AIX 1 6, AIX 1 7" |
| |
| Memory consumption |
| Roll.... 0 |
| EM...... 33518336 |
| Heap.... 0 |
| Page.... 196608 |
| MM Used. 21989120 |
| MM Free. 3145840 |
|User and Transaction |
| Client.............. 256 |
| User................ "MM_BUX00_ZZ" |
| Language key........ "R" |
| Transaction......... "MIGO_GI " |
| Transaction ID...... "54AEDD9E3EE60710E10080000A15C616" |
| |
| EPP Whole Context ID.... "54B35F7088300910E10080000A15C616" |
| EPP Connection ID....... 00000000000000000000000000000000 |
| EPP Caller Counter...... 0 |
| |
| Program............. "CL_BUAVC_ENTRY================CP" |
| Screen.............. "SAPLMIGO 0001" |
| Screen Line......... 18 |
| Debugger Active..... "none" |
|Information on where terminated |
| Termination occurred in the ABAP program "CL_BUAVC_ENTRY================CP" - |
| in "POST". |
| The main program was "SAPLMIGO ". |
| |
| In the source code you have the termination point in line 82 |
| of the (Include) program "CL_BUAVC_ENTRY================CM00J". |
|Source Code Extract |
|Line |SourceCde |
| 52|*--- method has provided some errors!): |
| 53| |
| 54|* Note 1499464: |
| 55|* IF cl_abap_aab_utilities=>is_active( id = 'BUAVC_GROUP' |
| 56|* mode_assert_dump = 'X' ) = 'X'. |
| 57| MOVE 'X' TO l_flg_dump. |
| 58|* ENDIF. |
| 59| |
| 60|*--- Check if the entry buffer of the AVC ledger contains data records |
| 61|*--- from previous COLLECT events: |
| 62| IF ( l_f_avc_ledger-ref_ledger->entry_buffer_lines_count( ) > 0 ). |
| 63|*--- Sorry, must dump: |
| 64| ASSERT ID buavc_group |
| 65| FIELDS c_avc_text 'POSTING_NOT_ALLOWED' |
| 66| CONDITION l_flg_dump <> 'X'. |
| 67| IF l_flg_dump = 'X'. |
| 68| MESSAGE x002(buavc) WITH c_avc_text space |
| 69| 'POSTING_NOT_ALLOWED' space. |
| 70| ENDIF. |
| 71| ENDIF. |
| 72| ENDIF. |
| 73|*---------------------------------------------------------------------- |
| 74|* Note 1666556: |
| 75| IF me->g_commit_before_post EQ 'X'. |
| 76|*--- An unauthorized COMMIT WORK occurred before calling this POST |
| 77|*--- method. This COMMIT WORK has refreshed the AVC entry buffer and |
| 78|*--- would thus create a database inconsistency! |
| 79| MOVE 'X' TO l_flg_dump. |
| 80| IF l_flg_dump = 'X'. |
| 81|*--- Sorry, must dump (see note 1666556): |
|>>>>>| MESSAGE x002(buavc) WITH c_avc_text space |
| 83| 'INVALID_COMMIT' space. |
| 84| ENDIF. |
| 85| ENDIF. |
| 86|*---------------------------------------------------------------------- |
| 87| |
| 88| |
| 89|*--- Call the POST method of the corresponding ledger instance: |
| 90| CALL METHOD l_f_avc_ledger-ref_ledger->post |
| 91| EXPORTING |
| 92| i_ref_appl_log = me->g_ref_appl_log |
| 93| i_doc_ref = i_doc_ref. |
| 94| |
| 95| ENDLOOP. |
| 96|
Thanks Advance.
SAMHi Sam,
Please check if there is any commit statement written in badi or enhancement before calling this method for posting which is leading to update termination.
Regards,
Prakash. -
Short Dump while executing New Hire (action type) in PA40
Hi All,
i am getting short dump while executing PA40 for new hire action type can anyone look into this and guide as i am new to HCM.
Category ABAP Programming Error
Runtime Errors SYNTAX_ERROR
ABAP Program /1PAPAXX/HDR_21000A
Application Component Not Assigned
Date and Time 21.08.2014 14:07:03
Short text
Syntax error in program "/1PAPAXX/HDR_21000A ".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPFP50M" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "/1PAPAXX/HDR_21000A " in
include "/1PAPAXX/HDR_21000AO01 " in
line 52:
""LV_LENGTH" has already been declared"
The include has been created and last changed by:
Created by: "HCM04 "
Last changed by: "HCM03 "
Error in the ABAP Application Program
The current ABAP program "SAPFP50M" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "/1PAPAXX/HDR_21000A ".
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program /1PAPAXX/HDR_21000A :
""LV_LENGTH" has already been declared"
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP Release..... 731
SAP Basis Level. 0007
Application server... "dc-ds-erp"
Network address...... "172.16.23.111"
Operating system..... "Linux"
Release.............. "3.0.13-0.27-default"
Hardware type........ "x86_64"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "dc-ds-erp"
Database type..... "ORACLE"
Database name..... "ECD"
Database user ID.. "SAPSR3"
Terminal.......... "NLC-HP"
Char.set.... "C"
SAP kernel....... 720
created (date)... "Sep 14 2013 06:16:24"
create on........ "Linux GNU SLES-11 x86_64 cc4.3.4 use-pr130820"
Database version. "OCI_112, 11.2.0.3.0, V1, default"
Patch level. 500
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 720
Operating system..... "Linux 2.6, Linux 3"
Memory consumption
Roll.... 0
EM...... 37708200
Heap.... 0
Page.... 106496
MM Used. 4666776
MM Free. 3709976
User and Transaction
Client.............. 210
User................ "HCM03"
Language key........ "E"
Transaction......... "PA40 "
Transaction ID...... "53EF470299AB5D67E1000000AC10176F"
EPP Whole Context ID.... "005056A301D11EE48A9D08B337F884E3"
EPP Connection ID....... 00000000000000000000000000000000
EPP Caller Counter...... 0
Program............. "SAPFP50M"
Screen.............. "MP000000 1000"
Screen Line......... 3
Debugger Active..... "none"
Information on where terminated
Termination occurred in the ABAP program "SAPFP50M" - in
"GET_HEADER_WITH_TCLAS".
The main program was "MP000000 ".
In the source code you have the termination point in line 146
of the (Include) program "FP50MDHD".
Source Code Extract
Line
SourceCde
116
CALL FUNCTION 'HR_HEADER_GET'
117
EXPORTING
118
DHDID = FHD_HID
119
BEGDA = BEGDA
120
TCLAS = TCLAS
121
* Es wird nur einer der folgenden 3 Parameter benutzt.
122
* Ausgewertet wird zunaechst MOLGA, dann P0001 dann PERNR.
123
* Der erste der nicht initial ist wird ausgewertet.
124
* MOLGA =
125
P0001 = P0001
126
PERNR = PSPAR-PERNR
127
IMPORTING
128
PROG = HEADER_PROG
129
DNUM = HEADER_DYNNR
130
EXCEPTIONS
131
HEADER_DEACTIVATED = 1
132
HEADER_UNKNOWN = 2
133
HEADER_GENERATE_DEACTIVATED = 3
134
HEADER_GENERATE_FAILED = 4
135
INTERNAL_ERROR = 5
136
OTHERS = 6.
137
138
IF NOT SY-SUBRC IS INITIAL.
139
* Bei Problemen gibt's eben ein leeres Dynpro.
140
HEADER_PROG = 'SAPMP50A'.
141
HEADER_DYNNR = '0090'.
142
ELSE. " NOT sy-subrc IS INITIAL. "
143
* Dann setzen wir jetzt auch noch das Datum fest.
144
PERFORM HEADER_BEGDA_SET IN PROGRAM (HEADER_PROG) USING BEGDA.
145
* Und schalten auf Uebergabe der PERNR mit globalen Variablen.
>>>>>
PERFORM HEADER_LAZY_ON IN PROGRAM (HEADER_PROG).
147
ENDIF. " (ELSE) NOT sy-subrc IS INITIAL. "
148
* Merken wie der Header heisst. Damit MPPERS00 sich erinnern kann.Hi,
Error Log: Syntax error
""LV_LENGTH" has already been declared"
please check LV_LENGTH variable declaration.
It may be declared more once! -
ABAP Dumps while loading data form one DSO to another DSO
Hi All,
We are getting following ABAP dump while loading data from one DSO to another DSO.
Please find below ABAP Dump we are getting.
Please let us know how we can resolve this issue.
Category ABAP Programming Error
Runtime Errors MESSAGE_TYPE_X
ABAP Program CL_RSBK_CMD_DP_LOOP===========CP
Application Component BW-WHM-DST
Date and Time 30.05.2014 07:10:03
Short text
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
Short text of error message:
Invalid program status
Long text of error message:
Technical information about the message:
Message class....... "RSBK"
Number.............. 299
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"MESSAGE_TYPE_X" " "
"CL_RSBK_CMD_DP_LOOP===========CP" or "CL_RSBK_CMD_DP_LOOP===========CM00Q"
"GET_LOG"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP Release..... 731
SAP Basis Level. 0004
Application server... "cab-bi-prod1"
Network address...... "10.10.72.43"
Operating system..... "Windows NT"
Release.............. "6.1"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 12
Shortdump setting.... "full"
Database server... "nguksvamds039"
Database type..... "ORACLE"
Database name..... "PWB"
Database user ID.. "SAPSR3"
Terminal.......... " "
Char.set.... "C"
SAP kernel....... 720
created (date)... "Dec 20 2011 02:14:54"
create on........ "NT 6.0 6002 S x86 MS VC++ 16.00"
Database version. "OCI_11201_SHARE, 11.2.0.3.0 "
Patch level. 117
Patch text.. " "
Database............. "ORACLE 10.1.0.*.*, ORACLE 10.2.0.*.*, ORACLE 11.2.*.*.*"
SAP database version. 720
Operating system..... "Windows NT 5.1, Windows NT 5.2, Windows NT 6.0, Windows
NT 6.1"
Memory consumption
Roll.... 0
EM...... 12569376
Heap.... 0
Page.... 24576
MM Used. 3422928
MM Free. 764192
User and Transaction
Client.............. 100
User................ "THARDEEP"
Language key........ "E"
Transaction......... " "
Transaction ID...... "03C1E7E3F560F14CA2AD00505698028E"
EPP Whole Context ID.... "53873353A7E31150E10080000A0A2142"
EPP Connection ID....... 00000000000000000000000000000000
EPP Caller Counter...... 0
Program............. "CL_RSBK_CMD_DP_LOOP===========CP"
Screen.............. "SAPMSSY0 1000"
Screen Line......... 6
Debugger Active..... "none"
Information on where terminated
Termination occurred in the ABAP program "CL_RSBK_CMD_DP_LOOP===========CP" -
in "GET_LOG".
The main program was "RSBATCH_EXECUTE_PROZESS ".
In the source code you have the termination point in line 7
of the (Include) program "CL_RSBK_CMD_DP_LOOP===========CM00Q".
The program "CL_RSBK_CMD_DP_LOOP===========CP" was started as a background job.
Job Name....... "BIDTPR_10616_1"
Job Initiator.. "THARDEEP"
Job Number..... 07100200
Source Code Extract
Line SourceCde
1 METHOD get_log.
2 DATA: l_r_request TYPE REF TO cl_rsbk_request.
3 IF p_r_log IS INITIAL.
4 TRY.
5 l_r_request = cl_rsbk_request=>create_from_db( if_rsbk_cmd~n_requid ).
6 CATCH cx_rs_not_found.
>>>>> MESSAGE x299(rsbk).
8 ENDTRY.
9 IF l_r_request->get_uses_new_log( ) = rs_c_false.
10 p_r_log = cl_rsbm_log_cursor_process=>create_for_process( i_r_process ).
11 ELSE.
12
13 TRY.
14 DATA l_runid TYPE rsbrun.
15 l_runid = l_r_request->get_runid( ).
16 IF l_runid = 0.
17 l_runid = 1.
18 ENDIF.
19 p_r_log = cl_rsbm_log_cursor_process_dtp=>create_new(
20 i_requid = if_rsbk_cmd~n_requid
21 i_runid = l_runid ).
22 IF n_datapakid IS NOT INITIAL.
23 p_r_log->goto_datapackage( n_datapakid ).
24 ENDIF.
25 CATCH cx_rs_not_found .
26 MESSAGE x299.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 1
SY-TABIX 0
SY-DBCNT 1
SY-FDPOS 25
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE Execute Batch Process
SY-MSGTY X
SY-MSGID RSBK
SY-MSGNO 299
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20140530
SY-UZEIT 071002
SY-XPROG SAPCNVE
SY-XFORM CONVERSION_EXIT
Active Calls/Events
No. Ty. Program Include Line
Name
7 METHOD CL_RSBK_CMD_DP_LOOP===========CP CL_RSBK_CMD_DP_LOOP===========CM00Q 7
CL_RSBK_CMD_DP_LOOP=>GET_LOG
6 METHOD CL_RSBK_CMD_DP_LOOP===========CP CL_RSBK_CMD_DP_LOOP===========CM00J 38
CL_RSBK_CMD_DP_LOOP=>SET_DP_IN_PROCESS
5 METHOD CL_RSBK_CMD_DP_LOOP===========CP CL_RSBK_CMD_DP_LOOP===========CM00B 9
CL_RSBK_CMD_DP_LOOP=>IF_RSBK_CMD~SET_PROCESS_PARAMETERS
4 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM00E 15
CL_RSBK_PROCESS=>SET_MEMENTO
3 METHOD CL_RSBK_PROCESS===============CP CL_RSBK_PROCESS===============CM003 30
CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~GET_OBJECT_REF
2 FUNCTION SAPLRSBATCH LRSBATCHU13 428
RSBATCH_EXECUTE_PROCESS
1 EVENT RSBATCH_EXECUTE_PROZESS RSBATCH_EXECUTE_PROZESS 374
START-OF-SELECTION
Chosen variables
Name
Val.
No. 7 Ty. METHOD
Name CL_RSBK_CMD_DP_LOOP=>GET_LOG
I_R_PROCESS
{O:1*\CLASS=CL_RSBK_PROCESS}
F0000000
E0001000
FE00000001000000
SCREEN
%_17NNS0005639652_%_%_%_%_%_%_
2533445333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
5F17EE30005639652F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
25005F00310037004E004E00530030003000300035003600330039003600350032005F0025005F0025005F0025005F
SPACE
2
0
0
0
2000
SY-REPID
CL_RSBK_CMD_DP_LOOP===========CP
4455544544454554445333333333334522222222
3CF232BF3D4F40FCFF0DDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
43004C005F005200530042004B005F0043004D0044005F00440050005F004C004F004F0050003D003D003D003D003D
ME->IF_RSBK_CMD~N_REQUID
0
0000
0000
00000000
L_R_REQUEST
{O:initial}
F0000000
F0000000
FF00000000000000
%_DUMMY$$
2222
0000
0000
0000
2000200020002000
SY-XPROG
SAPCNVE
5454454222222222222222222222222222222222
3103E65000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
53004100500043004E0056004500200020002000200020002000200020002000200020002000200020002000200020
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
SY-MSGID
RSBK
55442222222222222222
232B0000000000000000
00000000000000000000
00000000000000000000
5200530042004B002000200020002000200020002000200020002000200020002000200020002000
SY-MSGNO
299
333
299
000
000
320039003900
SY-MSGV1
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
SY-MSGV2
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
%_##TVREG_001
2
0
0
0
2000
RS_C_FALSE
2
0
0
0
2000
No. 6 Ty. METHOD
Name CL_RSBK_CMD_DP_LOOP=>SET_DP_IN_PROCESS
I_R_PROCESS
{O:1*\CLASS=CL_RSBK_PROCESS}
F0000000
E0001000
FE00000001000000
I_DATAPAKID
000236
333333
000236
000000
000000
300030003000320033003600
L_TH_RANGE_X
Table[initial]
L_S_RANGE_X
2222222222222222222222222222220022222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
L_TH_RANGE
Table[initial]
L_S_RANGE
2222222222222222222222222222220022222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
RSBC_C_DPSTATE-ACTIVE
5
3
5
0
0
3500
L_R_ROOT
{O:1091*\CLASS=CX_RS_FAILED}
B0004000
C0003400
BC00000043040000
ME
{O:72*\CLASS=CL_RSBK_CMD_DP_LOOP}
B0004000
70008000
B700000048000000
ME->P_R_LOG
{O:initial}
F0000000
F0000000
FF00000000000000
No. 5 Ty. METHOD
Name CL_RSBK_CMD_DP_LOOP=>IF_RSBK_CMD~SET_PROCESS_PARAMETERS
I_MEMENTO
ÿ#######4103##############D#####################D#A#T#A#P#A#K#I#D#¼####0#0#0#2#3#6#½#
F00000803333000000000000004000000000000000000000404050405040404040B0000303030303030B0
F621120041030000160000C0004900000000000000000000401040100010B09040C000C000000203060D4
FF0602010102800034313033000000000106000000000C000000440900000000000000000000000000000000000000
I_R_PROCESS
{O:1*\CLASS=CL_RSBK_PROCESS}
F0000000
E0001000
FE00000001000000
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
000000000000000000000000000000
000000000000000000000000000000
43004F004E00560045005200530049004F004E005F0045005800490054002000200020002000200020002000200020
SY-SUBRC
0
0000
0000
00000000
ME->N_DATAPAKID
000236
333333
000236
000000
000000
300030003000320033003600
ME
{O:72*\CLASS=CL_RSBK_CMD_DP_LOOP}
B0004000
70008000
B700000048000000
No. 4 Ty. METHOD
Name CL_RSBK_PROCESS=>SET_MEMENTO
I_TH_CMD_MEMENTO
Table IT_42[5x52]
\CLASS=CL_RSBK_PROCESS\METHOD=IF_RSBATCH_EXECUTE~GET_OBJECT_REF\DATA=L_S_PROCESS-TH_CMD_MEMENT
Table reference: 21
TABH+ 0(20) = 10C64700DF070000000000000000000000000000
TABH+ 20(20) = 150000002A000000050000003400000020000000
TABH+ 40(16) = 045A0000A006000005000000A425C000
store = 0x10C64700DF070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 21 (0x15000000)
label = 42 (0x2A000000)
fill = 5 (0x05000000)
leng = 52 (0x34000000)
loop = 32 (0x20000000)
xtyp = TYPE#000010
occu = 5 (0x05000000)
accKind = 4 (ItAccessHashed)
idxKind = 0 (ItIndexNone)
uniKind = 1 (ItUniYes)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
stMode = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
isUsed = 1
isCtfyAble = 1
hasScndKeys = 0
hasRowId = 0
scndKeysOutdated = 0
scndUniKeysOutdated = 0
----- Shareable Table Header Data -----
tabi = 0x607B4100DF070000
pgHook = 0x0000000000000000
idxPtr = 0xC08D5000DF070000
id = 36 (0x24000000)
shmTabhSet = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 5 (0x05000000)
lineAlloc = 5 (0x05000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
rowId = 18446744073709551615
scndKeyAdmin = 0x0000000000000000
##LOOP_DP ###쀀
00444554522222222222221000
30CFF0F4000000000000004020
0000000000000000000000000C
00000000000000000000000000
030000004C004F004F0050005F00440050002000200020002000200020002000200020002000200020002000140000
##X_DATASTORE ###쀀
00554454554542222222221000
408F414134F250000000004030
0000000000000000000000000C
00000000000000000000000000
0400000058005F004400410054004100530054004F0052004500200020002000200020002000200020002000140000
##ERROR_FILTER ###쀀
FF455455444545222222221000
FF522F2F69C452000000004040
FF00000000000000000000000C
FF000000000000000000000000
FFFFFFFF4500520052004F0052005F00460049004C0054004500520020002000200020002000200020002000140000
##TRFN ###쀀
FF554422222222222222221000
EF426E00000000000000004040
FF00000000000000000000000C
FF000000000000000000000000
FEFFFFFF5400520046004E002000200020002000200020002000200020002000200020002000200020002000140000
##U_ODSO ###쀀
00554454222222222222221000
605FF43F000000000000004040
0000000000000000000000000C
00000000000000000000000000
0600000055005F004F00440053004F0020002000200020002000200020002000200020002000200020002000140000
%_DUMMY$$
2222
0000
0000
0000
2000200020002000
SYST
##########################A###P#######|#########<#############################T#########XC####
0000000000000000000000100040005000000070000000003000000000000000000000000000105000100000540000
10000010000010000000109010101000000000C000000000C000000000000000000000000000604000E00000830500
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
0100000000000000000000000100000000000000000000000100000000000000000000000000000001000000190000
SYST-REPID
CL_RSBK_PROCESS===============CP
4455544555444553333333333333334522222222
3CF232BF02F3533DDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
43004C005F005200530042004B005F00500052004F0043004500530053003D003D003D003D003D003D003D003D003D
L_R_ERROR
{O:initial}
F0000000
F0000000
FF00000000000000
L_S_CMD_MEMENTO
##LOOP_DP ###쀀
00444554522222222222221000
30CFF0F4000000000000004020
0000000000000000000000000C
00000000000000000000000000
030000004C004F004F0050005F00440050002000200020002000200020002000200020002000200020002000140000
ME->P_TH_CMD_R
Table IT_724[8x48]
{O:1*\CLASS=CL_RSBK_PROCESS}\DATA=P_TH_CMD_R
Table reference: 353
TABH+ 0(20) = 00306E00DF070000000000000000000000000000
TABH+ 20(20) = 61010000D40200000800000030000000FFFFFFFF
TABH+ 40(16) = 04E100005042030009000000BC25C800
store = 0x00306E00DF070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 353 (0x61010000)
label = 724 (0xD4020000)
fill = 8 (0x08000000)
leng = 48 (0x30000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000037
occu = 9 (0x09000000)
accKind = 4 (ItAccessHashed)
idxKind = 3 (ItIndexList)
uniKind = 1 (ItUniYes)
keyKind = 3 (user defined)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
stMode = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
isUsed = 1
isCtfyAble = 1
hasScndKeys = 0
hasRowId = 0
scndKeysOutdated = 0
scndUniKeysOutdated = 0
----- Shareable Table Header Data -----
tabi = 0x302E6E00DF070000
pgHook = 0x0000000000000000
idxPtr = 0x80306E00DF070000
id = 647 (0x87020000)
shmTabhSet = 0x0000000000000000
refCount = 1 (0x01000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 9 (0x09000000)
lineAlloc = 9 (0x09000000)
shmVersId = 0 (0x00000000)
shmRefCount = 2 (0x02000000)
rowId = 18446744073709551615
scndKeyAdmin = 0x0000000000000000
########P Í#2# #
000000005222222222C03020
103000000000000000D02000
000000000000000000000000
000000000000000000000000
010000000300000000000000000000005000200020002000200020002000200020002000CD00000032000000200000
########P ·#H# #
000000005222222222B04020
300040100000000000708000
000000000000000000000000
000000000000000000000000
030000000000000004000000010000005000200020002000200020002000200020002000B700000048000000200000
########X ¶#I# #
00FF00005222222222B04020
40FF70108000000000609000
00FF00000000000000000000
00FF00000000000000000000
04000000FFFFFFFF07000000010000005800200020002000200020002000200020002000B600000049000000200000
########T °#O# #
FF00FF005222222222B04020
FF00EF40400000000000F000
FF00FF000000000000000000
FF00FF000000000000000000
FFFFFFFF00000000FEFFFFFF040000005400200020002000200020002000200020002000B00000004F000000200000
########T ®#Q# #
FF0000005222222222A05020
EF0060404000000000E01000
FF0000000000000000000000
FF0000000000000000000000
FEFFFFFF0000000006000000040000005400200020002000200020002000200020002000AE00000051000000200000
L_S_CMD_R
########P ·#H# #
000000005222222222B04020
300040100000000000708000
000000000000000000000000
000000000000000000000000
030000000000000004000000010000005000200020002000200020002000200020002000B700000048000000200000
SY-REPID
CL_RSBK_PROCESS===============CP
4455544555444553333333333333334522222222
3CF232BF02F3533DDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
43004C005F005200530042004B005F00500052004F0043004500530053003D003D003D003D003D003D003D003D003D
CX_RS_STEP_FAILED=>FAILED_IN_PARALLEL_MODE
L_S_CMD_MEMENTO-NODE
3
0000
3000
03000000
SY-SUBRC
0
0000
0000
00000000
L_S_CMD_MEMENTO-MEMENTO
ÿ#######4103##############D#####################D#A#T#A#P#A#K#I#D#¼####0#0#0#2#3#6#½#
F00000803333000000000000004000000000000000000000404050405040404040B0000303030303030B0
F621120041030000160000C0004900000000000000000000401040100010B09040C000C000000203060D4
FF0602010102800034313033000000000106000000000C000000440900000000000000000000000000000000000000
ME
{O:1*\CLASS=CL_RSBK_PROCESS}
F0000000
E0001000
FE00000001000000
No. 3 Ty. METHOD
Name CL_RSBK_PROCESS=>IF_RSBATCH_EXECUTE~GET_OBJECT_REF
I_PROCESS_TYPE
DTP_LOAD
4555444422
440FCF1400
0000000000
0000000000
4400540050005F004C004F004100440020002000
I_BATCH_ID
DTPR_10616_1
455553333353222222222222222222
4402F10616F1000000000000000000
000000000000000000000000000000
000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
I_BATCH_PROCESS
238
2222223332
0000002380
0000000000
0000000000
2000200020002000200020003200330038002000
I_PARAMETER
ۿĂȁ#ㄴ㌰##༅##(Ѐޱ##########PROCESSྫ##ꨨ##Ѐڪ##ꨌ##Ѐ###ꨄ##Ѐª##ꨂ##Ȁྭ##ꨴ##Ѐª##ꨨ###ྮ##갴##⠀¼#砠) ㈀㌀㘀##ÿ#
F008330000020B00000000005544455A002000A000000A000000A000000A003000A002100A003000B0220000000FF0
F2104000500801000000000002F3533B008800A00C800A004800A002000D004800A008400E004F00C0090000000FF0
0000330000000000000000000000000000A000000A000000A000000A000000A000000A000000A0020070333333FF00
61201300F0004700000000000000000F00A004600A004800A004000A002F00A004000A008F00C0080080000236FF00
FF060201010280003431303300000000050F0000000028000004B10700000000000000000000000000000000000000
R_R_RSBATCH_EXECUTE
{O:initial}
F0000000
F0000000
FF00000000000000
L_S_PROCESS-PROCESSTYPE
2
0
0
0
2000
L_S_PROCESS-NO_COMMIT
2
0
0
0
2000
L_R_PROCESS
{O:1*\CLASS=CL_RSBK_PROCESS}
F0000000
E0001000
FE00000001000000
L_S_PROCESS-DATAPAKID
000236
333333
000236
000000
000000
300030003000320033003600
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
L_S_PROCESS-NODE
-1
FFFF
FFFF
FFFFFFFF
L_S_PROCESS-TH_CMD_MEMENTO
Table IT_42[5x52]
No. 2 Ty. FUNCTION
Name RSBATCH_EXECUTE_PROCESS
ID
DTPR_10616_1
455553333353222222222222222222
4402F10616F1000000000000000000
000000000000000000000000000000
000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
I_DIALOG_DEBUG_MODE
2
0
0
0
2000
PROCESS
238
E000
E000
EE000000
G_T_COLS[]
Table[initial]
SY-REPID
SAPLRSBATCH
5454554454422222222222222222222222222222
310C232143800000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5300410050004C00520053004200410054004300480020002000200020002000200020002000200020002000200020
L_MODULE_TYPE
M
4
D
0
0
4D00
G_PROCESS_TYPE
2222222222
0000000000
0000000000
0000000000
2000200020002000200020002000200020002000
%_FL2*CTRL_200_WAIT
<initial>
<initial>
<initial>
<<iinniittiiaall>>
ICON_SELECT_DETAIL
@16@
4334
0160
0000
0000
4000310036004000
L_S_CTRL-LANGU
E
4
5
0
0
4500
SY-LANGU
E
4
5
0
0
4500
SYST-REPID
SAPLRSBATCH
5454554454422222222222222222222222222222
310C232143800000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5300410050004C00520053004200410054004300480020002000200020002000200020002000200020002000200020
SYST
##########################A###P#######|#########<#############################T#########XC####
0000000000000000000000100040005000000070000000003000000000000000000000000000105000100000540000
10000010000010000000109010101000000000C000000000C000000000000000000000000000604000E00000830500
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
0100000000000000000000000100000000000000000000000100000000000000000000000000000001000000190000
%_FL2*CTRL_1100
<initial>
<initial>
<initial>
<<iinniittiiaall>>
%_DUMMY$$
2222
0000
0000
0000
2000200020002000
L_MODULE_NAME
CL_RSBK_PROCESS
4455544555444552222222222222222222222222
3CF232BF02F35330000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
43004C005F005200530042004B005F00500052004F0043004500530053002000200020002000200020002000200020
%_SPACE
2
0
0
0
2000
G_T_BATCH_SERV
00
22222222222222222222222222222222222222222222222222222222222222222222222222222222233
00000000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
L_S_CTRL-PROCESS_TYPE
DTP_LOAD
4555444422
440FCF1400
0000000000
0000000000
4400540050005F004C004F004100440020002000
G_SUBRC
0
0000
0000
00000000
L_S_CTRL-BATCH_ID
DTPR_10616_1
455553333353222222222222222222
4402F10616F1000000000000000000
000000000000000000000000000000
000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
OKCODE
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
L_S_CTRL-BATCH_PROCESS
238
2222223332
0000002380
0000000000
0000000000
2000200020002000200020003200330038002000
SAVEOK
2222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
2000200020002000200020002000200020002000200020002000200020002000200020002000200020002000200020
L_PARAMETER
ۿĂȁ#ㄴ㌰##༅##(Ѐޱ##########PROCESSྫ##ꨨ##Ѐڪ##ꨌ##Ѐ###ꨄ##Ѐª##ꨂ##Ȁྭ##ꨴ##Ѐª##ꨨ###ྮ##갴##⠀¼#砠) ㈀㌀㘀##ÿ#
F008330000020B00000000005544455A002000A000000A000000A000000A003000A002100A003000B0220000000FF0
F2104000500801000000000002F3533B008800A00C800A004800A002000D004800A008400E004F00C0090000000FF0
0000330000000000000000000000000000A000000A000000A000000A000000A000000A000000A0020070333333FF00
61201300F0004700000000000000000F00A004600A004800A004000A002F00A004000A008F00C0080080000236FF00
FF060201010280003431303300000000050F0000000028000004B10700000000000000000000000000000000000000
L_R_BATCH_EXECUTE
{O:initial}
F0000000
F0000000
FF00000000000000
L_RETURN
<empty string>
10000000
40001000
1400000001000000
L_T_MSG
Table[initial]
%_TAG*CTRL_200_VAL
<initial>
<initial>
<initial>
<<iinniittiiaall>>
G_CURSOR_LINE
0
0000
0000
00000000
SY-SUBRC
0
0000
0000
00000000
No. 1 Ty. EVENT
Name START-OF-SELECTION
L_T_CTRL
Table IT_26[1x424]
\PROGRAM=RSBATCH_EXECUTE_PROZESS\DATA=L_T_CTRL
Table reference: 15
TABH+ 0(20) = D08B4C00DF070000000000000000000000000000
TABH+ 20(20) = 0F0000001A00000001000000A8010000FFFFFFFF
TABH+ 40(16) = 040000005090000004000000C130C000
store = 0xD08B4C00DF070000
ext1 = 0x0000000000000000
shmId = 0 (0x00000000)
id = 15 (0x0F000000)
label = 26 (0x1A000000)
fill = 1 (0x01000000)
leng = 424 (0xA8010000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000013
occu = 4 (0x04000000)
accKind = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniNo)
keyKind = 1 (default)
cmpMode = 8 (cmpManyEq)
occu0 = 1
stMode = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
isUsed = 1
isCtfyAble = 1
hasScndKeys = 0
hasRowId = 0
scndKeysOutdated = 0
scndUniKeysOutdated = 0
----- Shareable Table Header Data -----
tabi = 0x10854C00DF070000
pgHook = 0x508C4C00DF070000
idxPtr = 0x0000000000000000
id = 21 (0x15000000)
shmTabhSet = 0x0000000000000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 508 (0xFC010000)
lineAlloc = 12 (0x0C000000)
shmVersId = 0 (0x00000000)
shmRefCount = 1 (0x01000000)
rowId = 18446744073709551615
scndKeyAdmin = 0x0000000000000000
DTPR_10616_1 238
4555533333532222222222222222222222223332222222222222222222222222222222222222222222222222222222
4402F10616F10000000000000000000000002380000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
SYST
##########################A###P#######|#########<#############################T#########XC####
0000000000000000000000100040005000000070000000003000000000000000000000000000105000100000540000
10000010000010000000109010101000000000C000000000C000000000000000000000000000604000E00000830500
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
0100000000000000000000000100000000000000000000000100000000000000000000000000000001000000190000
L_S_CTRL
DTPR_10616_1 238 BIDTPR_10616_1 07100200cab-bi-prod1_
4555533333532222222222222222222222223332244455553333353222222222222222222333333336662662776635
4402F10616F100000000000000000000000023800294402F10616F100000000000000000007100200312D29D02F41F
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
SCREEN
%_17NNS0005639652_%_%_%_%_%_%_
2533445333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
5F17EE30005639652F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
25005F00310037004E004E00530030003000300035003600330039003600350032005F0025005F0025005F0025005F
L_S_CTRL-BATCH_PROCESS
238
2222223332
0000002380
0000000000
0000000000
2000200020002000200020003200330038002000
%_SPACE
2
0
0
0
2000
L_S_PAR-WP_NO
12
332
120
000
000
310032002000
ID
DTPR_10616_1
455553333353222222222222222222
4402F10616F1000000000000000000
000000000000000000000000000000
000000000000000000000000000000
44005400500052005F00310030003600310036005F0031002000200020002000200020002000200020002000200020
L_PROCESS
238
E000
E000
EE000000
L_S_HEADER-HOLD_PAR_PROCS
X
5
8
0
0
5800
SY
##########################A###P#######|#########<#############################T#########XC####
0000000000000000000000100040005000000070000000003000000000000000000000000000105000100000540000
10000010000010000000109010101000000000C000000000C000000000000000000000000000604000E00000830500
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000C
0100000000000000000000000100000000000000000000000100000000000000000000000000000001000000190000
PROCESS
999999999
FC93
F9AB
FFC99A3B
Internal notes
The termination was triggered in function "ab_jmess"
of the SAP kernel, in line 1411 of the module
"//bas/720_REL/src/krn/runt/abdynpro.c#7".
The internal operation just processed is "MESS".
Internal mode was started at 20140530071002.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=1724)
When : 5/30/2014 7:9:54.12
Threads : 2
Computer Name : NGUKSVRMDS040
User Name : pwbadm
Number of Processors: 4
Processor Type: Intel64 Family 6 Model 37 Stepping 1
Windows Version : 6.1 Current Build: 7601
State Dump for Thread Id 1374
0000000002178EF0 0000000140F6F2A1 0020002000200020 disp+work!DumpStacks [ntstcdbg.c (548)]
0000000002178FF0 000000013FB0E304 0000000074D126B0 disp+work!NTDebugProcess [ntstcdbg.c (383)]
0000000002179020 000000013FD1C439 0000000074D126B0 disp+work!CTrcStack2 [dptstack.c (354)]
0000000002179070 000000013FD21A7F 0000000002179AD0 disp+work!rabax_CStackSave [abrabax.c (8649)]
0000000002179980 000000013FCD37FC 000000000000005C disp+work!ab_rabax [abrabax.c (1419)]
00000000021799C0 000000013FD0BBE1 0000000000000000 disp+work!ab_jmess [abdynpro.c (1418)]
0000000002179B50 000000013FD7E5D8 0000000000000001 disp+work!ab_extri [abextri.c (721)]
0000000002179BA0 000000013FD7EEC5 0000000000000001 disp+work!ab_xevent [abrunt1.c (278)]
0000000002179C30 000000013FD5C589 000007DF000002A0 disp+work!ab_trigg [abrunt1.c (57)]
0000000002179CC0 000000013FB77126 0000000000000016 disp+work!ab_run [absubmit.c (511)]
0000000002179E70 000000013FB7BA2D 0000000000000000 disp+work!dynpmcal [dymainstp.c (2732)]
0000000002179F00 000000013FB7ACDC 000000000217A0E0 disp+work!dynppai0 [dymainstp.c (1355)]
0000000002179FD0 000000013FB34EEF 0000000000000020 disp+work!dynprctl [dymainstp.c (470)]
000000000217F3C0 000000013F9C3CC0 0000000000000000 disp+work!dynpen00 [dymain.c (2026)]
000000000217F690 000000013F9C44BC FFFFFFFFFFFFFF00 disp+work!TskhLoop [thxxhead.c (4871)]
000000000217F6F0 000000013F8EC603 00000000000D9E9C disp+work!ThStart [thxxhead.c (1195)]
000000000217F790 000000013F8C10A1 FFFFFFFF00000001 disp+work!DpMain [dpxxdisp.c (1174)]
000000000217F7C0 0000000141246B8E 0000000000000001 disp+work!nlsui_main [thxxanf.c (80)]
000000000217F7F0 000000007799652D 0000000000000000 disp+work!__tmainCRTStartup [crtexe.c (552)]
000000000217F820 0000000077ACC541 0000000000000000 kernel32!BaseThreadInitThunk
000000000217F870 0000000000000000 0000000000000000 ntdll!RtlUserThreadStart
State Dump for Thread Id 290
000000000E0BF880 000007FEFDAB3C2F 00000000DBAAC265 ntdll!NtFsControlFile
000000000E0BF8F0 0000000141139FAF FFFFFFFFFFFFFFFE KERNELBASE!ConnectNamedPipe
000000000E0BF990 0000000074C81D9F 00000000024BC0D0 disp+work!SigIMsgFunc [signt.c (717)]
000000000E0BF9C0 0000000074C81E3B 0000000074D12AC0 MSVCR100!endthreadex
000000000E0BF9F0 000000007799652D 0000000000000000 MSVCR100!endthreadex
000000000E0BFA20 0000000077ACC541 0000000000000000 kernel32!BaseThreadInitThunk
000000000E0BFA70 0000000000000000 0000000000000000 ntdll!RtlUserThreadStart
List of ABAP programs affected
Index Typ Program Group Date Time Size Lang.
0 Prg RSBATCH_EXECUTE_PROZESS 0 13.08.2013 12:28:38 45056 E
1 Prg SAPMSSY0 1 13.08.2013 09:12:51 111616 E
2 Prg SAPMSSYD 1 13.08.2013 10:17:05 23552 E
3 Prg SAPFSYSCALLS 1 07.03.2005 18:01:13 8192 E
4 Prg RSDBRUNT 0 13.08.2013 10:51:31 306176 E
5 Prg SAPLSPRI 5 13.08.2013 10:49:40 407552 E
6 Typ PRI_PARAMS 0 27.10.1998 15:01:35 5120
7 Typ ARC_PARAMS 0 08.08.1997 14:45:20 5120
8 Typ PRI_LAYOUT 0 04.09.2002 14:38:36 3072
9 Typ PRIPAR_EXT 0 09.09.2011 20:56:18 3072
10 Typ PRIPAR_EX2 0 09.09.2011 20:54:51 2048
11 Typ PRIPAR_EX3 0 09.09.2011 20:54:52 3072
12 Typ TPRI_DEF 0 01.02.2001 17:50:49 5120
13 Prg SAPLSPOO 13 13.08.2013 10:14:36 181248 E
14 Typ TSP03 0 13.08.1998 16:56:08 5120
15 Typ USR01 0 09.09.2011 20:55:50 4096
16 Typ TSP1D 0 09.09.2011 20:57:01 5120
17 Prg SAPLRSPOLSTDRV 17 28.05.2009 08:18:25 64512 E
18 Typ TSPOPTIONS 0 06.12.1996 16:09:18 2048
19 Prg SAPCNVE 19 07.03.2005 18:01:13 9216 E
20 Prg SAPLSPOC 20 09.09.2011 21:19:41 177152 E
21 Typ RSPOCHECK 0 14.07.1997 13:01:20 4096
22 Typ DEVPAR 0 09.09.2011 20:54:15 3072
23 Typ RSPOATTR 0 19.01.2000 18:34:33 2048
24 Typ RSSCR 0 23.11.1999 09:24:41 5120
25 Prg RSDBSPBL 0 07.03.2005 18:01:13 84992 E
26 Prg SAPDB__S 0 07.03.2005 18:01:13 21504 E
27 Typ VARID 0 28.05.2009 08:12:55 5120
28 Typ SSCRFIELDS 0 02.05.1997 13:16:39 5120
29 Prg RSDBSPVA 0 13.08.2013 10:51:31 160768 E
30 Prg %_CSYDB0 0 07.03.2005 18:01:13 40960 E
31 Typ RSVAMEMKEY 0 16.12.1996 19:31:50 2048
32 Prg RSDBSPMC 0 05.09.2006 14:14:08 92160 E
33 Typ DDSHDESCR 0 28.11.1997 16:26:30 4096
34 Typ SPPARAMS 0 07.03.1997 14:48:48 2048
35 Prg SAPLICON 35 13.12.2007 11:37:48 31744 E
36 Prg %_CICON 35 13.12.2007 11:37:48 126976 E
37 Typ ICONT 0 05.09.2006 14:14:08 2048
38 Prg SAPLSABE 38 09.09.2011 21:09:40 14336 E
39 Prg SAPLSECU 39 13.08.2013 10:16:43 110592 E
40 Typ RSSUBINFO 0 22.11.1999 21:15:17 3072
41 Prg RSDBSPVD 0 09.09.2011 21:33:31 102400 E
42 Typ DFIES 0 09.09.2011 20:54:19 10240
43 Typ VARI 0 16.12.1996 19:38:11 6144
44 Typ RSDSFIELDS 0 28.05.2009 08:12:29 3072
45 Prg %_CRSDS 0 07.03.2005 18:01:13 11264 E
46 Typ RSDSEXPR 0 16.12.1996 19:31:30 3072
47 Typ RVARI 0 18.06.1999 11:23:08 4096
48 Prg SAPLSVAR 48 13.08.2013 10:49:34 936960 E
49 Typ RSVARKEY 0 16.12.1996 19:31:51 2048
50 Prg SAPLSSEL 50 13.08.2013 10:42:32 1699840 E
51 Prg RSDBSPDS 0 13.12.2007 11:37:48 66560 E
52 Typ RSEXFCODE 0 18.07.1997 17:04:17 2048
53 Prg SAPLDSYA 53 13.08.2013 10:45:29 52224 E
54 Prg SAPFSDS1 53 07.03.2005 18:01:13 61440 E
55 Typ TDCLD 0 14.07.1998 14:53:43 5120
56 Prg SAPLSDOD 56 13.08.2013 10:42:31 50176 E
57 Typ DOKIL 0 07.04.1997 18:29:04 3072
58 Prg SAPLLANG 58 09.09.2011 21:12:32 11264 E
59 Typ T002 0 25.09.2007 11:09:36 2048
60 Prg SAPFSPOR 0 24.06.2008 18:36:49 16384 E
61 Typ RSPARINT 0 10.03.1995 17:53:00 2048
62 Prg SAPLSCNT 62 07.03.2005 18:01:13 34816 E
63 Prg SAPSHDTV 62 13.08.2013 08:38:56 38912 E
64 Prg SAPFGUICNTL 1 07.03.2005 18:01:13 27648 E
65 Prg SAPLOLEA 65 13.08.2013 08:38:34 110592 E
66 Prg SAPLSGUI 66 04.12.2009 20:43:32 105472 E
67 Prg SAPLSTTM 67 09.09.2011 21:26:18 79872 E
68 Prg SAPLSBDC 68 13.12.2007 10:50:07 49152 E
69 Prg SAPLSFES 69 13.08.2013 10:47:09 316416 E
70 Prg SAPLTHFB 70 13.08.2013 10:21:30 472064 E
71 Typ WPINFO 0 28.05.2009 08:12:57 6144
72 Prg SAPLURFC 72 13.08.2013 10:49:32 29696 E
73 Prg SAPLSPLUGIN 73 09.09.2011 21:19:29 9216 E
74 Typ SWCBCONT 0 09.09.2011 20:56:57 3072
75 Typ OLE_VERBS 0 09.02.1995 13:23:37 2048
76 Typ OLE_PA 0 13.01.1995 11:06:59 2048
77 Typ SSCRTEXTS 0 15.08.1997 14:15:15 3072
78 Prg SAPLRSBATCH 78 13.08.2013 12:29:38 689152 E
79 Prg /1BCDWBEN/SAPLREN0002 79 23.11.2005 13:29:42 294912 E
80 Prg SAPLSENA 80 28.05.2009 08:20:47 39936 E
81 Prg SAPLBTCH 81 13.08.2013 10:51:12 2248704 E
82 Prg SAPLRS_GENERAL 82 13.08.2013 12:20:02 120832 E
83 Prg /1BCDWBEN/SAPLREN0003 83 23.11.2005 13:29:44 282624 E
84 Prg SAPLSYDB 84 09.09.2011 21:28:17 65536 E
85 Typ MSXXLIST_V6 0 28.05.2009 08:12:22 4096
86 Typ BAL_S_MSG 0 09.09.2011 20:53:51 7168
87 Prg CL_RSBK_PROCESS===============CP 87 10.09.2011 08:11:36 103424 E
88 Prg IF_RSBATCH_CALLBACK===========IP 78 09.09.2011 22:39:45 9216 E
89 Prg IF_RSBATCH_EXECUTE============IP 78 09.09.2011 22:39:45 8192 E
90 Typ RSBK_S_PROCESS 0 09.09.2011 20:56:47 4096
91 Typ RSBK_S_CMD_MEMENTO 0 09.09.2011 20:54:56 2048
92 Prg CL_RSBK_REQUEST===============CP 92 13.08.2013 11:53:19 222208 E
93 Prg CL_RSBK_REQUEST_GENERAL=======CP 93 10.09.2011 08:12:31 38912 E
94 Prg SAPLRRSI 94 13.08.2013 12:29:38 393216 E
95 Typ RSD_S_COB_PRO 0 09.09.2011 20:56:49 26624
96 Prg CL_RSR========================CP 96 13.08.2013 12:06:59 180224 E
97 Prg CL_RS_BASE====================CP 97 13.08.2013 12:27:37 15360 E
98 Prg CL_RSD_CHA====================CP 98 13.08.2013 11:55:18 563200 E
99 Prg CL_RSD_IOBJ_VERS==============CP 99 13.08.2013 12:03:26 301056 E
100 Prg SAPLRRMS 100 13.08.2013 12:29:38 49152 E
101 Prg SAPLRRI1 101 13.08.2013 12:29:38 496640 E
102 Typ RSR_S_DEBUGFLAGS 0 13.08.2013 12:01:28 14336
103 Prg CL_RSDDTREX_CORE==============CP 103 13.08.2013 12:29:38 49152 E
104 Prg SAPLRSDI 104 09.09.2011 22:19:14 43008 E
105 Prg SAPLRSDG_IOBJ_DB_READ 105 13.08.2013 12:29:38 355328 E
106 Typ RSD_S_AGGRINFO 0 09.09.2011 20:55:04 2048
107 Typ RSD_S_VIOBJ 0 09.09.2011 20:55:07 30720
108 Prg SAPLRSDN_IOBJ 108 13.08.2013 12:29:38 163840 E
109 Prg CL_RSROA_VQ_SERVICES==========CP 109 13.08.2013 12:29:37 86016 E
110 Prg CL_ABAP_ELEMDESCR=============CP 110 28.05.2009 08:29:24 41984 E
111 Prg CL_ABAP_DATADESCR=============CP 111 28.05.2009 08:29:18 21504 E
112 Prg CL_ABAP_TYPEDESCR=============CP 112 13.08.2013 10:48:27 33792 E
113 Prg CL_ABAP_REFDESCR==============CP 113 13.08.2013 10:48:27 34816 E
114 Prg CL_ABAP_STRUCTDESCR===========CP 114 13.08.2013 10:48:27 49152 E
115 Prg CL_ABAP_COMPLEXDESCR==========CP 115 28.05.2009 08:29:17 19456 E
116 Prg CL_ABAP_TABLEDESCR============CP 116 09.09.2011 21:11:02 37888 E
117 Prg CL_ABAP_CLASSDESCR============CP 117 28.05.2009 08:29:15 34816 E
118 Prg CL_ABAP_OBJECTDESCR===========CP 118 28.05.2009 08:29:28 37888 E
119 Prg CL_ABAP_INTFDESCR=============CP 119 28.05.2009 08:29:25 27648 E
120 Prg CL_ABAP_SOFT_REFERENCE========CP 120 18.11.2005 14:35:28 10240 E
121 Prg CL_ABAP_REFERENCE=============CP 121 07.03.2005 18:01:13 8192 E
122 Prg CL_RSRTS_METADATA=============CP 122 13.08.2013 12:28:25 106496 E
123 Prg CL_RSRTS_METADATA_R3IS========CP 123 13.08.2013 11:55:22 157696 E
124 Prg IF_RSRTS_METADATA=============IP 117 13.08.2013 11:55:54 26624 E
125 Prg %_CABAP 117 28.05.2009 08:14:56 36864 E
126 Prg IF_SERIALIZABLE_OBJECT========IP 117 07.03.2005 18:01:13 5120 E
127 Prg CL_RSROA_VQ_METADATA==========CP 127 13.08.2013 11:55:22 252928 E
128 Prg CL_RSL_ME_METADATA============CP 128 13.08.2013 12:28:21 233472 E
129 Prg IF_RSDRV_TREX_NAME_MAPPER=====IP 117 13.08.2013 12:29:31 8192 E
130 Prg CL_RSDDLTIP_IPROV_TABLE=======CP 130 13.08.2013 11:55:15 147456 E
131 Prg CL_RSAN_PR_ANPR_PROV_TRANSIENTCP 131 13.08.2013 11:55:06 117760 E
132 Prg CL_RSD_DTA====================CP 132 13.08.2013 12:03:25 320512 E
133 Typ LVC_S_ROID 0 19.01.2000 18:31:34 2048
134 Typ RSZCOMPKEY 0 09.09.2011 20:55:16 3072
135 Prg IF_RSO_TLOGO_MAINTAIN=========IP 117 09.09.2011 22:36:34 13312 E
136 Prg IF_RSD_DTA====================IP 117 09.09.2011 22:35:40 30720 E
137 Prg CL_RSRTS_METADATA_ODP=========CP 137 13.08.2013 12:03:31 396288 E
138 Prg IF_RSRTS_TRPR=================IP 117 13.08.2013 12:10:34 10240 E
139 Prg CL_RSR_QPROV_METADATA=========CP 139 13.08.2013 11:55:23 248832 E
140 Typ RSD_S_DTA_PRO 0 09.09.2011 20:55:08 26624
141 Typ RSD_S_IOBJ_OBN 0 09.09.2011 20:56:49 2048
142 Prg CX_RSD_IOBJ_NOT_FOUND=========CP 142 09.09.2011 22:36:07 16384 E
143 Prg CX_RSD_IOBJ_EXCEPTION=========CP 143 09.09.2011 22:36:07 14336 E
144 Prg CX_RS_STATIC_CHECK============CP 144 09.09.2011 22:37:44 19456 E
145 Prg CX_RS_ERROR===================CP 145 09.09.2011 22:37:36 13312 E
146 Prg CX_STATIC_CHECK===============CP 146 18.11.2005 14:35:29 11264 E
147 Prg CX_ROOT=======================CP 147 09.09.2011 21:51:41 13312 E
148 Prg CX_NO_CHECK===================CP 148 18.11.2005 14:35:29 11264 E
149 Typ RSAROUT 0 09.09.2011 20:49:50 4096
150 Typ RSAROUTT 0 09.09.2011 20:50:52 2048
151 Typ RSDVDPA 0 09.09.2011 20:56:49 9216
152 Typ RSDIOBJV 0 09.09.2011 20:54:57 5120
153 Typ RSDKYF 0 09.09.2011 20:46:44 5120
154 Typ RSDVTIM 0 09.09.2011 20:56:49 12288
155 Typ RSDVUNI 0 09.09.2011 20:56:49 9216
156 Typ RSDVCHA 0 09.09.2011 20:55:09 14336
157 Prg CL_RSDRC_NCUM_GEN_TYPES=======CP 157 13.08.2013 12:28:48 9216 E
158 Prg CL_RSD_IOBJ_UTILITIES=========CP 158 09.09.2011 22:25:11 57344 E
159 Prg SAPLRSDN 159 13.08.2013 12:29:38 86016 E
160 Prg SAPLRSVERS 160 13.08.2013 12:29:38 371712 E
161 Typ RSNPAR 0 09.09.2011 20:55:07 3072
162 Prg SAPLSTR4 162 13.08.2013 10:42:32 74752 E
163 Prg %_CTRNSP 162 07.03.2005 18:01:13 10240 E
164Hi Hardeep,
Looks like the transformation and DTP need to be activated again.
The error is RSBK (299) - 'Invalid program status'. So please activate the transformation and DTP possibly activate the DSO's too.
It should then work.
Thanks
Amit -
Short dump while executing info package in 3.5 data flow?
Hi,
i am getting short dump while executing info package while executing info package. it was working perfectly 2 days back suddenly it is giving this problem. it is a full load for info object text data and i have only 600 records. when i tried with " only info package" it is working perfectly n bringing the data into PSA. But when i use "PSA and the into data target" it is giving short dump.
i replicated Data source and also i activated transfer rules, update rules still it is not working. When i check with another info objects it is working perfectly fine. i dont know what is wrong with only particular info object.
Please find attached short dump.
ThanksHi,
When you load transaction data I think there is a deadlock.
Check in the process overview (transaction SM50) the waiting processes are in program SAPLSENA .
The program SAPLSENA is the lock handler tool.
Also check if ACR is running on this target while your load is happening.
Check in SM12 if there are any lock entries for the Infoobject to which you are loading data and on RSICCONT table .
Try reloading after deleting the locks manually.
Regards. -
Dump while executing the report in the background!!!
Hi Experts,
I have created one report which is calling the "HRASR_TEST_PROCESS" (HR form process) thru BDC.
Its running fine while executing via SE38 (foreground) but getting dump while executing from the background with same variant.
The dump is follows,
Short Text
Exception condition "CNTL_ERROR" raised.
ERROR ANALYSIS
A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the exception condition "CNTL_ERROR". Since the exception was not intercepted by a superior program, processing was terminated.
Line Source Code
32 WHEN 1.
33 RAISE CNTL_SYSTEM_ERROR.
34 WHEN 2.
35 RAISE CNTL_ERROR.
36 WHEN 3.
37 class cl_gui_cfw definition load.
38 message id 'DC' type 'W' number cl_gui_cfw=>reason_no_init
39 raising create_error.
40 WHEN 4.
41 RAISE LIFETIME_ERROR.
42 WHEN 5.
43 RAISE LIFETIME_DYNPRO_DYNPRO_LINK.
44 WHEN OTHERS.
45 RAISE CNTL_ERROR.
46 ENDCASE.
47
48 m_container_type = CONTAINER_TYPE_CUSTOM.
49
50 CALL METHOD SET_VISIBLE
51 EXPORTING
52 VISIBLE = '1'
53 EXCEPTIONS
54 CNTL_SYSTEM_ERROR = 1
55 CNTL_ERROR = 2.
56
57 CASE SY-SUBRC.
58 WHEN 0.
59 WHEN 1.
60 RAISE CNTL_SYSTEM_ERROR.
61 WHEN 2.
>>>>> RAISE CNTL_ERROR.
63 WHEN OTHERS.
64 RAISE CNTL_ERROR.
65 ENDCASE.
66
67 m_name = container_name.
68 call method set_window_property
69 exporting property_id = property_name
70 value = m_name
71 keep_cache = 'X'
72 exceptions others = 1.
73 if sy-subrc ne 0.
74 clear m_name.
75 raise cntl_error.
76 endif.
77
78 CALL METHOD ME->REGISTER_CACHED_W_PROPERTY
79 EXPORTING
80 PROPERTY_ID = property_height
81 EXCEPTIONS
Kindly let me know, what is the problem and how can i solve it.
Thanks in advance.
Regards,
HarishHello Zhou,
indeed, as you mention the ALV grid, there are some workarounds in the system, but there is no global solution. For example, the function module REUSE_ALV_GRID_DISPLAY detects internally whether it is called in background mode, and in this case it forwards the call to REUSE_ALV_LIST_DISPLAY which is runnable in background mode, since it creates an ABAP list.
But normally, when using objects of the control framework in your program, you are restricted to dialog mode.
Kind regards,
Rüdiger -
Getting a dump while executing the standard report BUSCHDOC
Hi,
I am getting a dump while executing the standard report BUSCHDOC.
I am specifying the following values:-
Application Object : BUPA
Business partner:<some business partner>
Changed on: <some date>
Changed by:<some userid>
Below are the dump details
Short text
CREATE DATA: The specified type "BUSSRCH_401BUPAT" is no valid data type.
Any suggestions to avoid the dump are welcome.
Thanks,
RavindraHi Ravindra,
Can you execute report BUP_BUSSRCHGF_REPAIR and try again ?
Also, go to transaction BUS10, click the button Geneate Selection. On next screen, give Application object = BUPA, Max no. of tables per view = 1.
Regards,
Rishu. -
Dump While Executing ME21N, ME22N and ME23N
Hi,
Am getting the below Short Dump while executing ME21N, ME22N and ME23N.
Runtime Errors SYNTAX_ERROR
Date and Time 08.07.2009 15:41:00
|Short text
Syntax error in program "ME_PROCESS_PO_CUST============CP ".
|What happened?
| Error in the ABAP Application Program
|
| The current ABAP program "CL_EX_ME_PROCESS_PO_CUST======CP" had to be
| terminated because it has
| come across a statement that unfortunately cannot be executed.
|
| The following syntax error occurred in program
| "ME_PROCESS_PO_CUST============CP " in include
| "ME_PROCESS_PO_CUST============CM000 " in
| line 14:
| "The specified type cannot be converted into the target variables."
| " "
| " "
| " "
|
| The include has been created and last changed by:
| Created by: "SILABAP "
| Last changed by: "SILABAP "
| Error in the ABAP Application Program
|
| The current ABAP program "CL_EX_ME_PROCESS_PO_CUST======CP" had to be
| terminated because it has
| come across a statement that unfortunately cannot be executed.
|Error analysis
| The following syntax error was found in the program
| ME_PROCESS_PO_CUST============CP :
| "The specified type cannot be converted into the target variables."
| " "
| " "
| " "
|Trigger Location of Runtime Error
| Program CL_EX_ME_PROCESS_PO_CUST======CP
| Include CL_EX_ME_PROCESS_PO_CUST======CM001
| Row 1
| Module type (METHOD)
Module Name IF_EX_ME_PROCESS_PO_CUST~INITIALIZE
|Source Code Extract
|Line |SourceCde
|>>>>>|method IF_EX_ME_PROCESS_PO_CUST~INITIALIZE.
| 2| CLASS CL_EXIT_MASTER DEFINITION LOAD.
3
| 4| DATA l_badi TYPE REF TO ME_PROCESS_PO_CUST.
5
6
7
8
9
| 10| TRY.
11
| 12| GET BADI l_badi
| 13| CONTEXT me.
14
| 15| CALL BADI l_badi->INITIALIZE
| 16|.
17
18
19
| 20| CATCH CX_BADI_NOT_IMPLEMENTED CX_BADI_INITIAL_REFERENCE.
Please let me know is there any OSS note to resolve the Issue.
Thanks,
SubasHi,
when I try to do the same in my system SAP gives me an information message as follows:-
Changes to transported Business Add-In definitions are incompatible
Message no. ENHANCEMENT236
Diagnosis
This business add-in definition has already been transported. Subsequent changes could invalidate existing business add-in implementations.
System Response
The runtime behaviour is no longer predictable. Syntax errors or short dumps may occur.
Procedure
If possible, do not make these changes. Alternatively, create a new business add-in definition incorporating the changes and use it, along with the existing definition.
It clearly indicates that the BADI definition should not be changed if active implementations already exists.
I am really now not sure how to solve your issue.
Try deactiviting the standard BADI implementation.
Then again add the filter and then remove it.
And then try activating the BADI implementation once again.
Regards,
Ankur Parab -
Dump while executing - RBT_ENH_ACT - Update of indirect sales
hi friends,
i am getting this following Dump while executing - RBT_ENH_ACT - Update of indirect sales.
can someone kindly help me how to go about this plz as i cant find the component "UMENGE_UPD" anywhere.
Runtime Errors SYNTAX_ERROR
Date and Time 05.02.2010 08:03:15
Short text
Syntax error in program "BON_ENH_ACT ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_DEF_IM_RBT_ENH_BADI_IND====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "BON_ENH_ACT " in include
"BON_ENH_ACT " in
line 188:
"The data object "GS_S780" does not have a component called "UMENGE_UPD"
help wouid be much appreciated.
thanks in advance.
regards
leo
Edited by: leo002 on Feb 5, 2010 7:30 AMSyntax error in program "BON_ENH_ACT ".
Check whether note 1114558 helps you.
thanks
G. Lakshmipathi -
Dump while executing the query on MProvider on Stock and Billing
Hi,
I am getting this dump while executing a Query on Multiprovider. Here Multiprovider is on Billing cube(z-cube) and 0IC_C03 cubes. In the report , I have KF of both cubes. I am sure I never faced this type of problem in version 3.5. It seems we are going back day by day because of version 7.0.
A:
1) I am not getting any error if I take Kfs of only Billing cube in the
report on the multiprovider.
2) But I am getting this problem by taking only KF from 0IC_c03 on this multiprovider .
3) And also this problem is not raising in any queries(ofcourse same type) of those 2 cubes.
4) Here Fiscal Variant is constant filter, and User will enter the Fiscal year.
5) In the Columns area ,I have taken 12 selections each one restricted with one CALMONTH2.
6) in Rows part I have 3 selections. Here 2 selections have Billing KF and other selection has Blockd Stock qty KF.
B:
The above dump is not raising if I take 12 selections on columns with a restriction on 0CALMONTH with Customer exit varible , but different offsets in selections. Here the Customer exit variable gets April of the User entered Financial year as the value. But the problem is For all columns it is giving same Value for Stock KF even though we have different values in the system. Surprisingly issue is , Sales figures are comming proper.
I am on Version 7 and patch 13. And I am using Querydesigner 3.5.
Dump message: GETWA_NOT_ASSIGNED
<i>Short text:
Field symbol has not yet been assigned.
What happened?
Error in the ABAP Application Program
The current ABAP program "RSDRC_NCUM_ROUTINES" had to be terminated because it has come across a statement that unfortunately cannot be executed.
keywords:
"GETWA_NOT_ASSIGNED" " "
"RSDRC_NCUM_ROUTINES" or "RSDRC_NCUM_ROUTINES"
"FILTER_SELDR"</i>
Thanks and Regards,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma
Message was edited by:
Anil Kumar SharmaOK,
I come back to my question: you said "<i>But the problem is For all columns it is giving same Value for Stock KF even though we have different values in the system</i>"
Can you say to which period this value correspond?
This looks like you are missing some characteristic identification in your multi.
Can you assess that?
Do you have the same time periods in both cubes? I mean, do you have at least the periods used in your RKF / query in both cubes? Would you mind pasting your identification for time IObjs from table RSDICMULTIIOBJ?
please see hereunder my identification for a sales and stock multicube
INFOCUBE OBJVERS IOBJNM PARTCUBE PARTIOBJ
ZMC021 A 0CALDAY ZICRT_C07 0CALDAY
ZMC021 A 0CALMONTH ZICRT_020 0CALMONTH
ZMC021 A 0CALMONTH ZICRT_C07 0CALMONTH
ZMC021 A 0CALMONTH2 ZICRT_020 0CALMONTH2
ZMC021 A 0CALMONTH2 ZICRT_C07 0CALMONTH2
ZMC021 A 0CALQUART1 ZICRT_020 0CALQUART1
ZMC021 A 0CALQUART1 ZICRT_C07 0CALQUART1
ZMC021 A 0CALQUARTER ZICRT_020 0CALQUARTER
ZMC021 A 0CALQUARTER ZICRT_C07 0CALQUARTER
ZMC021 A 0CALWEEK ZICRT_C07 0CALWEEK
ZMC021 A 0CALYEAR ZICRT_020 0CALYEAR
ZMC021 A 0CALYEAR ZICRT_C07 0CALYEAR
ZMC021 A 0FISCPER ZICRT_020 0FISCPER
ZMC021 A 0FISCPER ZICRT_C07 0FISCPER
ZMC021 A 0FISCPER3 ZICRT_020 0FISCPER3
ZMC021 A 0FISCVARNT ZICRT_020 0FISCVARNT
ZMC021 A 0FISCVARNT ZICRT_C07 0FISCVARNT
ZMC021 A 0FISCYEAR ZICRT_020 0FISCYEAR
ZMC021 A 0FISCYEAR ZICRT_C07 0FISCYEAR
note that here ZICRT_020 is a monthly stock cube.
hope that helps...
Olivier. -
Runtime Errors: CONVT_OVERFLOW while executing transaction sm66
Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Date and Time 02.04.2011 00:41:01
Short text
Overflow when converting from "2.90113e+09"
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "2.90113e+09",
an overflow occurred.
There is probably an error in the program
"SAPLTHFB".
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
The main program was "SAPMSM66 ".
In the source code you have the termination point in line 82
of the (Include) program "LTHFBU26".
The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
occurred in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLTHFB "; its source code begins in line
1 of the (Include program "LTHFBU26 ".Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Date and Time 02.04.2011 00:41:01
Short text
Overflow when converting from "2.90113e+09"
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "2.90113e+09",
an overflow occurred.
There is probably an error in the program
"SAPLTHFB".
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
The main program was "SAPMSM66 ".
In the source code you have the termination point in line 82
of the (Include) program "LTHFBU26".
The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
occurred in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLTHFB "; its source code begins in line
1 of the (Include program "LTHFBU26 ". -
SHORT DUMP WHILE EXECUTING DTP.
Hi Gurus,
I have got a short dump while executing DTP the Error is as Follows.
Runtime Error: MESSAGE_TYPE_X.
Reasons for Error: 1.The installation of the SAP GUI on the present server is faulty or obselete
2.There is a error in the application program
And i have sent the sreen shot of the Short Dump to BASIS TEAM and they have replied me that they have to install some patches and it will take some time.
But i have no much time and i have to someway or the other execute the DTP and load the data.
Is there any shortcuts for this i mean to say without the involvement of Basis team that i can do in th BI System
Regards
Amar.Hi Amar,
If the problem is with with System itself, how can we all have a short cut in that case. You may give it another trial, but you have to wait for the patches to be applied. Ask your basis team to get it done ASAP.
Thanks..
Shambhu -
Dump while Executing the Report HINUINFU
Dear All
I am getting Dump while executing the T.Code - HRPBSIN_IN_INFU (HINUINFU). As per my Configuration it should update the IT0267 and the IT0582. While debugging the We found out that its updating the IT0267 internally. But while reaching to IT0582 its reflecting on the feature 40CEA and the T549D.
here we are having the Telephone Reimbursement for this i copied the Tax code SEXM to ZTEL and assigned to my wage type
I also maintaied this Subtype to the feature 40CEA.
Checked also the IT0582 and its subtype time constraint.
Still the the DUMP persisisting. Please provide the solutions if any of you come across with the same situation.
Thanks & Regards
Srikanth ReddyHi
Issue has been resoved internally. Return value to feature set as HINUOSD0 to MOLGA. hence closing the thread
Regards
Srikanth Reddy -
System Throws short dump while executing data source 2LIS_11_VASCL in RSA3.
Hello Experts,
I got short dump while executing data source 2LIS_11_VASCL in RSA3.
The details are as follow.
When importing object "MC11VA0SCL_TAB", the structure did not match the
structure of the target object. The error occurred in component
no. 567.
This may be due to one of the following reasons:
- the structure is actually different (the next field has, for
example, a different data type) or
- the same sequence of components were exported and imported,
but the fields were from other include units.
I have checked source and target fields and those are of same length and data type.
Could you please give some points why this short dump occurs.
Thanks
Konda ReddyHi,
This error is not between BI and R/3. It is within R/3. You may have setup data and then modified the datasource.
Delete setup data, generate your datasource again. Setup data and try again.
If you are on a live system with data setup after a downtime and you do not want to delete it, then bring your datasource to the original state when you setup data and pull data.
Cheers.... -
Short dump while executing few queries , which has got created on Infoset.
Hi,
We went to BI7.0 upgrade from BW3.x now.
We are getting short dump short dump while executing few queries and work book, which has got created on Infoset.
When i was executing work book where i was geting popup message saying that "Erro ZSD_XST_F00121 is invalid".When i click that message it went to dump.
I was getting this error while executing query on infoset.
We are currently SP Stack 13(Patch level 15).
I found some note 1067918 as per the shortdum,where it is saying that you need to apply SP Stack14(patch level16).
Please some one who had earlier this kind of issue.
I appreciate your answer.Dear Krish,
Yes, It is the patch problem.
We too faced the same issue on Infosets.
Apply SP 15.
Regards,
Ram.
Maybe you are looking for
-
[SOLVED]ADF BC/JSF-how to execute a "ExecuteWithParams" from a b.-bean?
Hello everyone. I am new to ADF BC/JSF web apps. and I have a situation where I have a form that inserts a record into the DB, the page has a backing bean attached to it and the "create" button on the form is attached to a method called "grabarButton
-
How to fix clone stamp issue?
MAC OS / Photoshop CS5 As you can see in the attached image, my clone stamp selection doesn't extend out to the edges of the outline, which makes using it very clumsy to use. My PS installation at home and all the installations at this business don't
-
Can't access otherwise in switch from GUI in JDev 10.1.2 beta 3
When trying to populate multiple cases of a switch JDev is not allowing me to open the <otherwise> tag from the GUI. It doesn't seem to recognize it as anything but normal text. Is there a workaround to be able to access the XPATH assistant or Expres
-
We are currently using Oracle forms 9i, our Oracle App Server version is 10.1.2.3 and currently our database version is 10.1.04. We are thinking to upgrade to Oracle database version 11.1.x.x or 11.2.x.x. So my question is what is the latest Oracle d
-
Why there is no manual creation of deliveries for STO...
Individual(VL01N) : You can create one delivery for each sale order on the screen. There is no manual creation of deliveries for STOu2019s. Transaction VL01N Why there is no manual creation of deliveries for STO... Thank you very much. Hoolaa Edited