ABAP Dynpro available in NW04 and NW04s

Hello:
Is ABAP Dynpro available in NW04 as well as in NW04s?  I think that WebDynpro (Java) is already available in NW04 but I was not sure about ABAP Dynpro.
Can anyone help me verify this?
Thank you...
George Lu

WD ABAP is fully useable in WAS 7.0(NW 2004s).   There are reminants of WD ABAP in WAS 6.40(NW 2004).  You can access the WD objects, but you may have some problems.  But to answer,  WD ABAP is only in 2004s.
Regards,
Rich Heilman

Similar Messages

  • Differences between NW04 and NW04s

    Hello SAPians,
    Can anybody explian me the diffrences between NW04 and NW04s. Or please tell me, where I can find regarding this information.
    Thanking you.
    Regards,
    Ajaykumar

    hi
    good
    NW04->
    The Support Platform is an open platform to develop and run small utilities (known as plug-ins) that perform support-oriented activities on any and all components of SAP NetWeaver. The Support Platform is included NW04 SP13 and higher.
    Plug-ins generally perform tests or create reports. A plug-in might check the configuration of the system, check if permissions are set correctly, or check the name of your current Web AS version. You can create plug-ins for any task that can be performed by a Java program.
    Each plug-in is a single Java class, and groups of plug-ins are deployed to the Support Platform in JAR files. The Support Platform comes with a collection of out-of-the-box plug-ins; developers can write their own plug-ins, which administrators can then deploy and run.
    The Support Platform can monitor the entire Web AS system on which it runs, and can run plug-ins on any of the Java processes in the cluster. The Support Platform provides a user interface for deploying plug-ins, displaying available plug-ins, running them and displaying the results.
    NW04s -> This is an advance version of NW04 server.
    thanks
    mrutyun^

  • J2EE supported versions for NW04 and NW04S

    Hi ,
    Can Pls anyone pointout some documents for the list of J2EE version support list( For Ex: JSP 2.0 suported in NW04S ) for NW04 and NW04S releases ?
    Thanks
    Praveen

    Praveen,
    Both NW04 and NW2004s are J2EE 1.4 compliant. You can get these details by accessing PAM [here|http://service.sap.com/pam]
    Check this [wikipedia link|http://en.wikipedia.org/wiki/Java_EE_version_history] as well for more information.
    And Java EE is supported in  NW7.1
    Chintan

  • Nw04 to nw04s

    Hi,
    got a couple of questions regarding nw04 to nw04s
    currently we are on ep 6.0 sp14 and interested to use the features of NW04s.
    1. is it an upgrade or migration from nw04 to nw04s? i hope it is an upgrade, am i right?
    2. is it mandatory to upgrade all the systems in our landscape i.e. XI, BW, SRM, R3 to nw04s...or is there a facility to use only nw04s PORTAL.
    3. as far as i know, nw04s and nw04, the SPs release are going in parallel.. i.e.
       are the ep6.0 sp14 and nw04s portal sps5 have the same features or does nw04s portal has additional features compared to EP 6.0 SP14.
       my point here is, we are only interested in upgrading portal, so is it ok to continue sp stacks of nw04 or should we shift to nw04s.
    could someone please clarify
    thank you

    Hi,
    The code developed on 2004 will work on 2004s.
    Some minor changes have been made refer to the documentation for specific details
    SAP NW2004s is the mySAP Business Suite edition of SAP NW 2004.it is a minor release that delivers on specific needs of the mySAP and xapps solutions delivered by SAP in 2005. the "s" stands for "mySAP Business Suite Edition".
    The next major release of NW will deliver on Business Process Platform(BPP) it will be released in 2006.
    Few of the New capabilities in NW2004s
    1)Developing a web based user interface with Web Dynpro fro ABAP.
    2)Enhancements to enabling B2B processes
    3)Enhancements to business task management
    4)Enhancements to business planning
    5)Enhancements to enterprise data warehousing
    6)mass setup of mobile devices
    7)implementing a global portal
    Refer the link for more info
    http://help.sap.com/saphelp_nw04s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
    NW04 is a 'Java version' which means you can develop applications using Java and export them to portal.
    NW04s is a 'ABAP version'.Here you can develop ABAP reports and transactions and export them to portal. There you can create iViews using them.
    Netweaver 04s, includes both the ABAP and Java stacks. The Sneak preview for NW04s is only for the ABAP stack, and the Sneak Preview NW04 SP15 is only the java stack. If you are using the sneak preview for ABAP, you can develop WDA applications and BSP applications, they run directly in the engine, not in a portal. But they can be embeded in an iView in some portal. You don't have to have a portal to run your application. If you are using the java side, you can develop WDJ applications and JSP applications. Same applies here, they run on the java engine, not in a portal, but can be embeded into an iView which runs on the portal. But you don't need a portal for your application to run. The portal is just a frontend UI, the apps themselves run on the underlying engine, whether its ABAP or JAVA.
    Refer to the following threads for more information
    Re: What is NW04 s?
    Re: Differences between NW04 SP11 and NW04 SP15

  • NW04 vs NW04s

    Dear all,
    What is the difference between NW04 and NW04s? There appears to be some confusion here as to what is required for CRM4.0 and CRM5.0 in terms of which version of the Portal to run? We are currently implementing EP6 SP13 (part of NW04) and are wondering to to upgrade to the NW04s version of EP. Any pointers to documentation on this topic would be greatly appreciated.
    Thanks, Neeta

    Hi Neeta,
    SAP NW2004s is the mySAP Business Suite edition of SAP NW 2004.it is a minor release that delivers on specific needs of the mySAP and xapps solutions delivered by SAP in 2005. the "s" stands for "mySAP Business Suite Edition".
    The next major release of NW will deliver on Business Process Platform(BPP) it will be released in 2006.
    Few of the New capabilities in NW2004s
    1)Developing a web based user interface with Web Dynpro fro ABAP.
    2)Enhancements to enabling B2B processes
    3)Enhancements to business task management
    4)Enhancements to business planning
    5)Enhancements to enterprise data warehousing
    6)mass setup of mobile devices
    7)implementing a global portal
    Refer the link for more info
    http://help.sap.com/saphelp_nw04s/helpdata/en/5b/8c3842bb58f83ae10000000a1550b0/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/57/a21f407b402402e10000000a1550b0/frameset.htm
    NW04 is a 'Java version' which means you can develop applications using Java and export them to portal.
    NW04s is a 'ABAP version'.Here you can develop ABAP reports and transactions and export them to portal. There you can create iViews using them.
    Netweaver 04s, includes both the ABAP and Java stacks. The Sneak preview for NW04s is only for the ABAP stack, and the Sneak Preview NW04 SP15 is only the java stack. If you are using the sneak preview for ABAP, you can develop WDA applications and BSP applications, they run directly in the engine, not in a portal. But they can be embeded in an iView in some portal. You don't have to have a portal to run your application. If you are using the java side, you can develop WDJ applications and JSP applications. Same applies here, they run on the java engine, not in a portal, but can be embeded into an iView which runs on the portal. But you don't need a portal for your application to run. The portal is just a frontend UI, the apps themselves run on the underlying engine, whether its ABAP or JAVA.
    Refer to the following threads for more information
    Re: What is NW04 s?
    Re: Differences between NW04 SP11 and NW04 SP15

  • Is Oracle 11g released for NW04s and ECC6.0?

    Is Oracle 11g released for NW04s and ECC6.0?
    Please help. Thanks!

    Plain and simple: No, it isn't.
    Check the SAP on Oracle homepage [here|SAP on Oracle] in SDN and read the latest development news on this topic including a rough schedule.
    regards,
    Lars

  • Standalone Interactive Forms without ABAP Dynpro and Drop down boxes

    Friends,
    I need to create Adobe interactive form with drop down boxes. I have 2 questions:
    1) do i need to use abap dynpro to display the form or can i display the form using print program
    2) for using drop down box, should i use the one from standard library or Web Dynpro ActiveX or Web Dynpro Native library
    Points will be rewarded for helpful answers.
    Thanks.

    Hi,
    Its not necessary to have ABAP web Dynpro to create and display adobe forms. You can display it in programs in ABAP. Go to following link to know more:
    [https://www.sdn.sap.com/irj/sdn/adobe#section39]
    There is a sample application for Adobe form in ABAP and lot more.
    You can use web dynpro Native dropdown list.
    Hope it will help you.
    Regards,
    Vaibhav Tiwari.

  • Connect ECC 6.0 with EP NW04, BW NW04 and CRM 4.0

    Hello All,
    We have R/3 Enterprise 47 x 200, we have connected to it the EP version NW04, BW version NW04 and CRM version 4.0 so, we need to upgrade only the R/3 to the new ECC 6.0 without upgrading the other components.
    My questions is if anyone knows if, Is it possible connect those old version to the new ECC 6.0 and where can I found this information?
    I was looked into marketplace, help.sap and in this forums but I didn't found anything so if you can help me to solve it, I will be very grateful.
    Thanks in advance,
    Alfonso

    EP6.0 will work perfectly fine with ECC6 but as previous posters have pointed out, technically its not a supported landscape.
    You would have little problem with simple transactional, BSP access etc but you would need to be careful about the use of any business packages you might want to use.  You would need business packages appropriate to the backend version you have (particularly for ESS/MSS) and then you would need to validate whether they actually work with EP6.0.
    Bit of risk as its not supported.
    Haydn

  • EP 6 and ABAP Dynpro Training Course Content

    Hi,
    Can any one help me in getting a course content of EP 6 and ABAP DYNpro.
    Regards,
    C Balaji

    Hi
    There are a couple of god tutorials in this section
    https://www.sdn.sap.com/irj/sdn/portal-elearning
    Also refer this link
    https://www.sdn.sap.com/irj/sdn/abap
    http://help.sap.com/saphelp_erp2005/helpdata/en/77/3545415ea6f523e10000000a155106/frameset.htm
    Regards
    Krishna

  • What is the Upgrade program used to upgrade NW04 to NW04s

    Hi,
    What is the Upgrade program used to upgrade NW04 to NW04s?
    Thanks Sri

    <b>SAPup</b> - Program to upgrade Web AS ABAP and related components BW,XI
    <b>SAPJup</b>- Program to upgrade WebAS Java and related components EP.
    Vijay Kothapalli

  • Issue with displaying ADOBE forms using ABAP dynpro

    Hi all,
    We are trying to display the adobe form in the portal using ABAP dynpro. but as i test the application in R/3 it throws the dump in ST22. if i see that dump it says  Uncaught exception in ADS, forms are not interactive, data can be provided on interactive forms only. But if we try the same aplication using Java dynpro it runs successfully.
    What can be the issue, is there any problem with ADS configuration.
    Its urgent. Please provide some inputs.
    Thanks and Regards

    Thanks Abhi,
    I checked  displayType it is already native and form type also ZCI. still there is same problem
    In st22, it shows exception as
    Error analysis                                                                               
    WebDynpro Exception:                                                                        
        The cause of the exception was:                                                                               
    ADS: com.adobe.ProcessingException: PDF is not interactive.  Data can only be                
        imported into interactive forms                                                                               
    thanks

  • Drop Down List population - Abap dynpro adobe form - type ZCI

    Hi ,
    How to create drop down list on a field. I am using ZCI type of form. (Abap dynpro adobe form - type ZCI)
    Most of the post i have seen only refers to the setting in forms but not about the settings in interface in se80 or SFP. please give me the detail steps to create drop down field and how to populate it.
    In other words is how to populate the drop down fields, where does the values come from to these fields.
    Thanks,
    Nikhil
    Edited by: NIKHILKUMAR POOJARI on Apr 3, 2009 7:28 PM

    HI Pradeep,
    Can you please tel me what i am doing worng here :
    types : begin of ty_nameid,
                  ZCARRIAGERESTRIC type ZCARRIAGERESTRICT,
                  DESCRIPTION type ZDESCRIPTION,
                END OF ty_nameid,
                tyt_nameid TYPE TABLE OF ty_nameid.
        data  : it_nameid type tyt_nameid,
                wa_nameid TYPE ty_nameid.
        DATA lo_nd_name TYPE REF TO if_wd_context_node.
        DATA lo_nd_nameid TYPE REF TO if_wd_context_node.
        DATA lo_el_nameid TYPE REF TO if_wd_context_element.
        DATA ls_nameid TYPE wd_this->element_nameid.
      navigate from <CONTEXT> to <NAME> via lead selection
        lo_nd_name = wd_context->get_child_node( name = wd_this->wdctx_name ).
      navigate from <NAME> to <NAMEID> via lead selection
        lo_nd_nameid = lo_nd_name->get_child_node( name = wd_this->wdctx_nameid ).
      @TODO handle not set lead selection
        IF lo_nd_nameid IS INITIAL.
        ENDIF.
      get element via lead selection
        lo_el_nameid = lo_nd_nameid->create_element(  ).
      @TODO handle not set lead selection
        IF lo_el_nameid IS INITIAL.
        ENDIF.
      alternative access  via index
      lo_el_nameid = lo_nd_nameid->get_element( index = 1 ).
      @TODO handle non existant child
      IF lo_el_nameid IS INITIAL.
      ENDIF.
    select * from ZCARRIAGERESTRIC INTO CORRESPONDING FIELDS OF TABLE it_nameid.
      get all declared attributes
       lo_el_nameid->set_attribute(
         EXPORTING
           Value = it_nameid
           name  = 'NAMEID' ).
    lo_nd_nameid->bind_table( it_nameid ).
    but its giving dump WebDynpro Exception: The ADS call has failed.
    i have created the Node as under
    CONTEXT
    NAME (NODE)
    NAMEID (NODE)
    ZCARR (ATTRIBUTE)
    DESCR  (ATTRIBUTE)
    DESC (ATTRIBUTE)
    I tried the second method, but that too failed. while entering the INSERT WEB DYNPRO SCRIPT it gave an error 'Error while entering script'.
    Edited by: NIKHILKUMAR POOJARI on Apr 6, 2009 11:04 AM

  • "/" character in ABAP dynpro screen element name

    Hello all,
    I have a screen element on ABAP dynpro named as  /DMNN/SD_SYS-SYSID
    I changed this element to drop down and get listed values from data element  /DMNN/SD_SYS-SYSID
    Now on the PBO, I want to set initial value
    /DMNN/SD_SYS-SYSID = 'D0P'
    But I got the following error when I try to activate
    Field "/DMNN/SD_SYS-SYSID" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement.
    Thanks for any help

    For each screen field you need corresponding data object defined in ABAP program. So all you need is to declare this structure either this way
    tables /DMNN/SD_SYS.
    or this
    data /DMNN/SD_SYS type /DMNN/SD_SYS.
    Now you can initialize its fields in PBO with any data you want.
    Regards
    Marcin

  • So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,it takes forever to back up my iPad AND my iPod so what can I do ?

    So I just updated to the newest update that was available for safari and iTunes but now it won't let me go on the Internet using safari and  it also won't let me sync my songs ,,,,,(it takes forever to backup my iPad AND my iPod) so what can I do ?

    If you're on windows try the following:
    This worked for me an hour ago and has allowed me to sync ok. Still haven't tried downloading the new version 5 to the phone yet as I'm still backing up photos etc just in case.
    1. Quit itunes
    2. Start an elevated command prompt (Start Menu -> All Programs -> Accessories -> right click Command Prompt -> Run as Administrator)
    3. Once in the command prompt type the following 3 words starting where your cursor is flashing: netsh winsock reset
    4. press ENTER
    5. Reboot your machine
    6. Restart itunes & connect device to sync
    7. Good luck  

  • Is Ibook available for Mac and PC Desktops and Laptops?

    I would love to read my purchased books on my Macbook. If Ibook is not available for Desktops and Laptops, how does one suggest this to Apple? Thank you,
    Troy S-G

    Go here: http://www.apple.com/feedback/ . You may need to provide the feedback against the iPad.

Maybe you are looking for