ABAP Engine Installation on AIX Cluster

Dear All,
I want to install ABAP Engine on Clustered IBM Server environment with O.S. AIX and Oracle DB. I am new to AIX and Cluster environment. Can anyone help me with the installation guide, or any related documents in this regard will be helpful..
If possible please mail me the procedure / guide on [email protected]
thanks.
Prashant.

Hi,
The required documents for installation are available on http://service.sap.com/instguides
Regards,
Siddhesh

Similar Messages

ABAP Engine Installation on AIX / Oracle

Dear Team.
We want to install the ABAP engine on the AIX / Oracle Clustered Environment on we have EP 7.0 installed.
Can anyone guide as to how this can be achieved.
Any help will be appreciated.
Thanks,
Prashant.

same as above
I suggest getting a Basis consultant on site, someone, who knows HACMP, can have a look at your current configuration (quorum, clusters filesystem et al) and can give suggestions, what´s the best and safest way to setup an additional system and if you need downtime according to your configuration or not.
Markus

Abap engine installation problem

hello all,
i have installed ABAP server.affter completion of installation i restarted the system.now i am unable to see NSP server in SAP management console.any ideas?
thanks in advance
Rajdeep Sarma

Make sure that the following Services are started:
SAPOSCol
SAPServiceNSP
If not, start the manually before opening the MMC. These service should be set with Startup Type = Automatic, so adjust if necessary

Mini WAS 6.20 = ABAP engine installation

I have copied all 3 Cds onto the hard disk, ran setup.bat from C drive, but still no success. The screen where I am expected to input c:\miniwas as per installation guide is not usable. This is how the error looks like;
start package for release independent database software
WRN: history path "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/BSPinst//sapdb/data/config
/install" not found
compareReleases(): file "C:/DOCUME1/ADMINI1/LOCALS~1/Temp/BSPinst//sapdb/progr
ams/bin/x_server.exe" not found
installation exited abnormally at Mo, May 22, 2006 at 12:08:05
writeHistory(): cannot create/open historyfile "C:/DOCUME1/ADMINI1/LOCALS~1/Te
mp/BSPinst//sapdb/data/config/install/SAPDB_history"
ERROR 2006-05-22 12:08:05 SAPDBINSTALL_IND_ADA ExecuteCheck:0
    Exit code from c:\mini_sap\sapdb\NT\I386\sdbinst.exe: 1.
ERROR 2006-05-22 12:08:05 SAPDBINSTALL_IND_ADA InternalInstallationDo:0
    Phase failed.
ERROR 2006-05-22 12:08:05 SAPDBINSTALL_IND_ADA InstallationDo:0
    Phase failed.
ERROR 2006-05-22 12:08:05 Main
    Installation aborted.

This is the FAQ for the 6.20 install, it may help.
<a href="http://www.sappress.com/support.cfm?account=&product=H958">http://www.sappress.com/support.cfm?account=&product=H958</a>
MattG.

Can we install SAP Netweaver 2004s, without installing ABAP engine on AIX?

Hi,
Can we install SAP Netweaver 2004s, without installing ABAP engine on AIX?
Thanks

Hi
Yes you can install java engine.Run sapinst from installation master cd and select only java engine installation.There will be check boxes abd you have to choose java engine.Also check the nwo4s installation guide.It will guide you throughly.Keep in mind to use correct jdk required for your kind of installatiom.
Reward points if useful

XI Installation requires ABAP Engine???

Hi,
We have a big landscape in our organisation.We are planning to install XI (NW 2004s SR2) machine also.
Our long term purpose with this installation is to replace the middlewares like Business connector,MQ etc.
I want to know that at present,whether I should install this XI with java stack only or should I install ABAP engine also thinking the above said thing in mind.
I am new to XI,so don't have much knowledge on this!!!
Can anybody provide some input on this?
Regards
Saurabh

Hi,
Integrating your SAP Business Connector with SAP XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/96ed2129-0b01-0010-2e91-c45e1fad0d03
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4f27ad80-0c01-0010-f8b8-c5e153a16ca1
XI installation guide
Installation Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/XI30InstallGuide.pdf
Configuration Guide
http://help.sap.com/bp_bpmv130/Documentation/Installation/Configuration_Guide_FP.pdf
Also this
https://websmp101.sap-ag.de/~sapidb/011000358700009389172004E.PDF
Thanks
Swarup
Edited by: Swarup Sawant on Mar 7, 2008 11:37 AM

J2ee Adapter engine installation error

Hi All,
I am installing XI with NW07. I had an ERP2005 server here with ABAP only. I installed Java Add In to it with usage type PI.
Now I tried to install J2ee adapter engine. It showed if i want to run a new installation or continue the old one.
I tried to install installation of J2ee adapter engine from a new directory.
It is stuck in between. I choose it as a MCOD to existing DB.
I can see a new instance for this in MMC and it is up and running.
But the old java instance is not running. None of the Proceses of Old Java instance (dispatcher, server0 and SDM) are not running. Did I do something wrong?
My JVM_BOOTSTRAP.OUT says this:-
Exception occurred:
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/dispatcher/ID4065200" does not exist.
at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(ConfigurationDataCacheAllImpl.java:107)
at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfiguration.java:715)
at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:426)
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:72)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Exception occurred:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
== Caused by: ==----
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID4065200) in the database! Check database consistency or local Bootstrap properties!
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:75)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:814)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
Bootstrap module> Problem occurred while performing synchronization.
My dev_jcontrol.b00 shows:-
JControlStartJLaunch: program = C:\usr\sap\IDE\DVEBMGS00\exe\jlaunch.exe
-> arg00 = C:\usr\sap\IDE\DVEBMGS00\exe\jlaunch.exe
-> arg01 = pf=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg02 = -DSAPINFO=IDE_00_bootstrap
-> arg03 = -nodeId=-1
-> arg04 = -file=C:\usr\sap\IDE\DVEBMGS00\j2ee\cluster\instance.properties
-> arg05 = -syncSem=JSTARTUP_WAIT_ON_5284
-> arg06 = -nodeName=bootstrap
-> arg07 = -jvmOutFile=C:\usr\sap\IDE\DVEBMGS00\work\jvm_bootstrap.out
-> arg08 = -stdOutFile=C:\usr\sap\IDE\DVEBMGS00\work\std_bootstrap.out
-> arg09 = -locOutFile=C:\usr\sap\IDE\DVEBMGS00\work\dev_bootstrap
-> arg10 = -mode=BOOTSTRAP
-> arg11 = pf=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg12 = -DSAPSTART=1
-> arg13 = -DCONNECT_PORT=4740
-> arg14 = -DSAPSYSTEM=00
-> arg15 = -DSAPSYSTEMNAME=IDE
-> arg16 = -DSAPMYNAME=sapides_IDE_00
-> arg17 = -DSAPPROFILE=C:\usr\sap\IDE\SYS\profile\IDE_DVEBMGS00_sapides
-> arg18 = -DFRFC_FALLBACK=ON
-> arg19 = -DFRFC_FALLBACK_HOST=localhost
-> lib path = PATH=C:\j2sdk1.4.2_09\jre\bin\server;C:\j2sdk1.4.2_09\jre\bin;F:\oracle\IDE\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_06\bin;C:\j2sdk1.4.2_06\lib;C:\usr\sap\IDE\SYS\exe\uc\NTI386
-> exe path = PATH=C:\j2sdk1.4.2_09\bin;C:\usr\sap\IDE\DVEBMGS00\j2ee\os_libs;F:\oracle\IDE\102\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\j2sdk1.4.2_06\bin;C:\j2sdk1.4.2_06\lib;C:\usr\sap\IDE\SYS\exe\uc\NTI386
Thr 4232 Tue Sep 16 17:48:04 2008
Thr 4232 *** ERROR => invalid return code of process bootstrap (exitcode = 66) http://jstartxx.c 1642
Thr 4232 JControlExecuteBootstrap: error executing bootstrap node bootstrap (rc = 66)
Thr 4232 JControlCloseProgram: started (exitcode = 66)
Thr 4232 JControlCloseProgram: good bye... (exitcode = 66)
My DEV_BOOTSTRAP.B00 shows:-
Thr 5984 Tue Sep 16 17:48:02 2008
Thr 5984 JHVM_RegisterNatives: registering methods in com.sap.bc.krn.perf.PerfTimes
Thr 5608 Tue Sep 16 17:48:04 2008
Thr 5608 JLaunchIExitJava: exit hook is called (rc = 66)
Thr 5608 **********************************************************************
u2022
o
     ERROR => The Java VM terminated with a non-zero exit code.
     Please see SAP Note 943602 , section 'J2EE Engine exit codes'
     for additional information and trouble shooting.
Thr 5608 JLaunchCloseProgram: good bye (exitcode = 66)
I ran the prerequisite checks before starting the installation.
It shows everything ok except it told me to have a environmental variable as CPIC_MAX_CONV with the value 200 at least. And I did that.
All the other checks were ok.
All are on SAME OS and same machine.
I have J2EE Adapter Engine installation guide, but there is nothing for this in that
In Instance properties file for the old instance it is showing the instance ID which it is not able to find.
In the configtool of both the instances, the instance ID is same under cluster_data and this is of the newer instance
How did the instance ID and data got replaced in the configtool of old instance. I mean the new instance has its new directory or folder.
What Could be the problem?
Did I do anything wrong here?
Kindly help

Hi,
Check out the SNote 997510, " Note 997510 - Troubleshooting
J2EE Engine 6.40/7.0 Bootstrap Issues ".
I hope it will help you to drill more in to the problem
Rgds
Radhakrishna D S

Is a simple ABAP Engine Licence available ?

Hello all !
After many tests, showrooms and procedures, I am convinced that WAS is the solution I need to pilot some of my SAP R/3 processes.
Now, I am wonderign which installation I could choose. My customer actually works on a 4.5C R/3 version and did not planned to upgrade to 4.7.
My only economic solution is to implement a second SAP server based upon WAS 6.20 in order to generate BSP applications that will control SAP Objects via RFC and Master Data via ALE/IDOCS.
I am trying an demo version called "ABAP Engine 6.20" that is able to do exactly what I want. So my question is:
Is there a SAP product that only licences an ABAP 6.20 Engine (a kind of R/3 BC without any modules)?
Thank you in advance for your answers.
Kind regards.
Sebastien

Hi Graig,
I am afraid my question was not sharp enough.
I do not want to create showrooms ore basic things based upon the Miniwas 6.20 that I already have.
What I would like to do is to install and manage a real server for real situations.
Do you think I can have a prodution licence upon a WAS Kernell without installing a complete SAP product ?
Tell me if I am still not precise (I am French and sometimes I hardly find the right terms)
Kind regards.
Sebastien

SSL configuration for ABAP engine

Hi Experts,
Can you please tell me how to configure SSL on ABAP engine?
Can you please guide me in details of the first part i.e. installation of SAPCRYPTOLIB for ABAP part?
I am not getting the document properly.
I am telling you what I have done.
1. I have downloaded the SAP Cryptoghraphic library for my platform.Two files were there--one is CAR file and another is SAR file.
After that probably
1. I have to extarct the files ( which one SAR or CAR? and how (with which command?))
2. After extraction, I'll get a file libsapcrypto.so. I have to put this into $DIR_EXECUTABLE directory.
What should be the exact path for $DIR_EXECUTABLE?
I have checked that in my system $DIR_EXECUTABLE=home/<sidadm>
Please let me know the absolute path where I have to put libsapcrypto.so
3. I have to set the environment variable SECUDIR to the directory $DIR_INSTANCE/sec.
What should be the exact path for $DIR_EXECUTABLE?
I have checked that in my system $DIR_EXECUTABLE=home/<sidadm>
Please let me know the absolute path to be set for SECUDIR.
Thanks and Regards,
Moulinath Ray
Edited by: Moulinath Ray on Feb 2, 2009 12:41 PM

Hello,
pls see the very usefull Doku at:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/65/6a563cef658a06e10000000a11405a/frameset.htm
The values of Dir Instance and so on you will find in TA AL11.
Good Luck
Volker

Problem Installing ABAP Engine of SAP WAS 6.20(TEST DRIVE VERSION)

Hi
I am trying to install ABAP Engine of SAP WAS 6.20(TEST DRIVE VERSION) which I got with the official ABAP Reference book of SAP press.
It is installing upto 91% and giving the following errors:
RC code form SyCoprocessWait = -2 .
Error: DBR3LICENSECREATE ExecuteCheck 2 718
Exit code from C:\MiniWAS\saplicense: -2.
Error: DBR3LICENSECREATE InternalInstallationDo 2 718
Phase failed.
Error: DBR3LICENSECREATE InstallationDo 2 718
Phase failed.
Error: Main {} 2 718
Installation aborted.
I am trying to learn ABAP and need to practise it. Could someone please help me in this matter.

Restart the install and search this forum for "MiniWAS", "Mini Was", "620 install" and you'll find half a dozen people who had the same problem.

Install - ABAP Engine - superdba password failed error

Hallo,
I have the J2EE Engine in my PC installed, and everything works fine. Now I am trying to install the ABAP Engine, and I get the error
<b>"Check of the superdba user password failed. Check logfile XCMDOUT.LOG"</b>
The error appears when I try to set the password for the superdba (Step 2 of the installation -> Define parameters)
Does anybody know, what can I do?
Thanks in advance
Jones

Hi,
did you specify a password for the superdba user (=SYSDBA user) at some point during the installation? If yes, did you maybe use any special character?
Thanks & regards,
Roland

What is tthe role of ABAP Engine in EP server

Hi to All,
do any one of u let me know the role of ABAP engine in EP server! How can i make use of ABAP Engine. I know to work with J2EE Engine, but generally what we will do in ABAP Engine.
It looks to u all as a silly question, but i am not clear of this function, so i need a detail explanation of this.
Regards,
Sireesha.

Hi,
before there was a WAS 6.20 (Web Application Server) SAP's R/3 Applications were build up on the so called R/3 Basis System. One part of the R/3 Basis was the APAP/4 Runtime. This was true until R/3 version 4.5.
In parallel SAP started to develop a J2EE Application Server. They founded/buyed a company in Bulgaria called InQMy. You might know that the portal version EP5.0 was based on the InQMy J2EE engine.
Since R/3 4.7 the old R/3 Basis is called "Web Application Server" (WAS 6.20). Additional to the ABAP/4 Runtime this WAS contains the former ITS (Internet Transaction Server" and the BSP's (Business Server Pages). The old ABAP/4 Runtime is now called "ABAP Stack".
The old InQMy J2EE Server is now called "J2EE Engine" or "JAVA Stack".
With Release 6.40 of the WAS it contains both the ABAP Stack and the JAVA Stack.
Now to Your Question. A standarad EP installation just contains the JAVA stack of the WAS. The ABAP stack normally is not installed, because it is not used by the EP. You could install the ABAP stack in addition. But for what purposes ? Well if You would like to develop a webapplication based on BSP.
If You are allread running an R/3 System it contains an ABAP Stack but normally no JAVA stack.
The Java Stack of the EP Server can call the ABAP Stack of an R/3 System via RFC (remote function call).
More confused now ?

EP 7 : Integration with ADS & ABAP engine

Dear All,
I am installing EP 7 with ABAP engine. In this case, the J2EE engine will be installed as an add-in.
In this case, the UME configuration of EP will use the SAP ABAP engine as datasource.
Now, will I be able to integrate my EP , UME with the ADS ? Is there anything which I need to take care while installation ?
Expect your help asap.
Regards,

Hi Shreya,
Following link give you info about UME configuration with the different types of Datasourse. Read this,
http://help.sap.com/saphelp_nw04/helpdata/en/e5/618a3eacd49076e10000000a114084/frameset.htm
Also read to use LDAP as datasourse,
http://help.sap.com/saphelp_nw04/helpdata/en/cc/cdd93f130f9115e10000000a155106/frameset.htm
Hope this help!
Juan
Please reward points if helpful

BO4 Installation on AIX with DB2

Hello,
I hope this is the correct forum in which to pose such a question.
We are currently planning an installation of BO4 on AIX and our standard choice of database platform is DB2 UDB V9.7. I have analysed the numerous SAP planning and installation guides for BO4 but am unclear as to what file systems the installation will demand for the DB2 system. For a traditional SAP AS ABAP/Java installation we would be creating /db2/<SID>/sapdata1-4 but there appears to be no such requirement in BO4.
Is there anyone out there who has performed this kind of installation or who has any useful information? Any help would be appreciated.
Thanks,
Gary

Hello,
just create a simple Schema in the Tablespace on any DB2 Database in your organisation you wish. Grant the user full access right to only this schema and your done. Prior for installing BI4 install the DB2 Client on the AIX Host where BI4 gets installed and configure it to access the newly created schema.
Also check SAP Note - 1384629
Regards
-Seb.

Do we need a separate J2ee engine installation

Hello,
We are in the initial phase of MI design implementation.The first and foremost question that we have is whether we need a dedicated J2EE engine installation (for MI) or can we use the J2ee engine stack that we already have for EP 6. Our current system landscape includes
SAP WAS 640 with EP 6 ( latest patch ). No ABAP stack.
BTW, Our mobile purpose is to have some sap applications developed with ability to do approvals offline.
Any inputs & suggestions ?
Swami Bala

AFAIK any WAS 6.40 with both JAVA und ABAP Stack will do.
Here is the notes from the Installation Guide for MI 2.5 SP9
<<Required Landscape Components
You can find the latest information about the required components in SAP Note
670643 at service.sap.com/notes.
SAP Web AS 6.40 (including the SAP J2EE Engine and the ABAP stack)
We recommend that you use the latest version of the SAP Web AS 6.40.
You can find the most recent versions on the SAP Service Marketplace at the
following Web address: service.sap.com/patches.
Backend system(s)
If you want to use Smart-Synchronization: Each SAP system, whatever
release it may have, as well as each SOAP-enabled external system. Multiple
backends are possible.
If you want to use Generic Synchronization: SAP systems based on Releases
4.5, 4.6, 6.10, 6.20, 6.30, 6.40. Multiple backends are possible.
If your SAP System is based on the Releases 4.5 or 4.6 you also have to install
the PI 2002.1 or PI 2003.1 SAP R/3 plug-in.
An application on the backend system that processes the data coming from the
mobile device.>>

ABAP Engine Installation on AIX Cluster

Similar Messages

Maybe you are looking for