ABAP error on posting MR11 entries

Hi,
Tried posting entires in MR11. On pressing icon post clearing gets error message program termination & ABAP error. ABAP error analysis " DIAG1 = MR11 1000 01 02"
Could any one advise what could be reason foir error & how to resolve it

if an ABAP terminates then it creates a huge log that can be analyzed via ST22.
even it is huge, the most important info is at the first 5 pages.
It is usually not a user error when a program terminates. Ask an ABAPer to analyze the dump.

Similar Messages

"21141: Error while posting journal entry :-10 / Internal error"

Hi All,
I'm want to dispose fixed asset by using retirement function in Fixed asset module. Anyone know the solution for this error message "21141: Error while posting journal entry :-10 / Internal error". Please help me.
Thanks in advance.
uddin

Hello Muhd
Please could you go in Administartion > Set Up > Fixed assets > GL
Account Detemination and check the settings of 'Clearing Acc. Asset
Acquisition' account, which is used when creating Journal Entry for
'Acquisition without vendor'.
Could you check if there is a 'Default VAT Code' assigned to this
account. In this case could you to clear the Default VAT Code assigned
to this account and try to do 'Acquisition without vendor' again?
Also,please try to check below option to see if that could help:
1)Check asset Class Land
2)Check GL accounts settings
3)Check the checkbox "Permit Other VAT Group"
Regards,
Syn Qin
SAP Business One Forums Team

Error in Posting Service Entry Sheet - FI 311 No Commitment Item in Item 1

Dear All,
We need a suggestion/solution for the following problem :-
Our customer had raised purchase orders for services in may 2010. The following critical entries were made in the purchase order.
Account Assignment Category was P-Project
The WBS element was entered as the Accounts Assigment Category was P.
The user was entering uncoded services. Hence the material group for that service which had G/L a/c tagged to it was entered. But the G/l code was not populated in the purchase order by the system at that time of creation of purchase order and subsequently the user was able to save and release purchase order.
The user was able to post Service Entry Sheet and generate accounting entries in june 2010.
Additional service entry sheets are required to be posted for the remaining quantites. The client has urcated the SES process into two parts.
1. Through T-code ZML81N the end user is able to create and save the SES.
2. Through T-code ML81N the Head of Department is able to approve and post the SES which results in generating of accounting entries.
Presently the user is able to create SES with tcode ZML81N. But when the HOD tries to approve and post the ses we get the error.
FI 311 - No commitement item maintained in Item 0001 in P220 (company code).
Fund Management is active in this company code and all settings related to Funds Management and FI have been checked by respective consultants.
The end user is not having any problems in processing SES for current Pos. But he is not able to create SES for the POs created in May, 2010 for which the user has already created and posted more than one SES against the same POs.
We have already escalated it to SAP.
Thanks in advance
Anil Shanbhag

Hi,
Use T.code:FS00 and check G/L account 280000 is there in your company code or not.
If yes, check its nature(type/description,control data , cretae bank/intererst tabs)of G/L
NOTE: Also check and compare the field selection between Movement type 101 & your G/L account 280000 in SE38 t.code with Program RM07CUFA
Regards,
Biju

Error in Posting the Entry, Parked through F-02

In our company we are using dual concept of Parking and Posting.
When We are parking a document in F-02 and Posting it through FBV0 (OR) FV60 error message coming.
I tried in F-43 also
We are trying to park and post for a Vendor to Vendor Transfer. We have used the P.Keys 25 and 38 for this.
ERROR MESSAGE IS : FIELD BSEG-SKFBT does not exist in the screen SAPMF05A0302
But if directly post the same transaction (i.e. without parking) posting is happening. No error message.
I cannot able to understand this. I referred the same to some of my friends in other companies. But they are saying that - in their systems they can able to park and post the entries.
Can any body help me in the matter. I will be grateful to them.
Thanks in Advance
Regards

Yes It is possible. After entering all the line items you need to select the Document - Park. With this It can be parked.
To post the same you have to use FBV0. There you can select the document and post.
In my case system allowed direct postings in F-02. It is also allowing when I am parking the same line items. But when I want to post it through FBV0 it is throughing an error. This is because the mismatch of Filed Status Group of Vendor Recon Account and the Posting Keys(i.e. 27 & 38). I made them correct and now I can able to solve the problem.
Hope I clarified your doubt. If not please revert back.

Error while posting journal entry: -5012/unbalanced transaction

Hi everyone,
I got this error message when trying to add a FA Retirement. FA is dated 26.May.08, depreciated for the month of May 2008 and would like to be retired on 01.June.08 (sale with customer).
FA G/L Account Determination is completely defined.
Would appreciate any reply. Thanks in advance!
Jac

Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team

Error while posting asset aquisition

Hi to All,
I am getting following error while posting aquisition entry.
"Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
I had made all settings what the error says above but still error persists.
PLEASE ITS VERY URGENT
tanuja

Hi tanuja,
Please check the setting in the T- code OABT.
If it helps pls reward some points.
JS

ABAP error in GL document posting.

Hi All,
I m getting an error while posting GL document.
Syntax error occurred in program SAPFGIMV in include FGIMV800 in line 329
The date object u201CGUI1u201D does not have a component called u201C.u201D
Can any one help on how to go about it.

Check note 11068.
If that doesn't help, take a look at [this|SAPFGIMV "The data object "*GLU1" does not have a component called ""."; thread; there is a possible solution at the end, it may apply in your case too.

ErroR while posting J1IH (TR6)

Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr 25000
    to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr 25000
Basic Excise Duty A/C Dr 22000
ECS                            Dr 2000
SECS                          Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil Kumar

The profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar

Error while posting sec.HighEd cess (1%) in J1iin.

we got following error while posting excise invoice J1IIN. all excise rates/values (10%,2%,1%) are coming properly in J1iin. if we remove excise duty 1% sec-high-ed-cess, than excise accounting entries posted properly in J1iin. but excise duty 1% (sec-high-ed-cess ) is there, than problem in posting, below amount 0.10 INR is of sec-high-ed-cess.
Balance in transaction currency
Message no. F5702
Diagnosis
A balance has occurred in transaction currency 'INR' with the following details:
Exchange rate '00', amount ' 0,10' and currency key 'INR'.
The data in the transaction currency were transferred from the calling application.
System Response
Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
and.....
System failure during locking GLaccount 1001 by 21150105
Message no. 8I076
reply me. Text Removed
Edited by: Lakshmipathi on Jan 13, 2012 6:42 PM
Please dont add such comments

Hey,
I have already replied to your thread for F5702 error.
G/L account locking error occurs when two or more users try to post to the same g/L account at the same time.
Regards,
Brinda

Error in Posting Vendor down Payment request

Hi
I am getting an error in posting vendor downpayment request. I am using the T Code F-47 and special GL indicator F.
Error: Special GL Indicator F is not defined for down payments
Message No F5053
Diagnosis: The specified GL Indicator is not classified as "Down payment" or not listed in the list of the target special GL indicators "F"
System Response: The entry is not accepted
Procedure: Enter an allowed special GL indicator or indicate a change of the default settings
I have checked the settings in FBKP. The GL Accounts and properties have been maintained there. The target GL Indicator A is also maintained in the properties. In OBXT also the GL Indicator has been defined. What could be the error?
Regards
Rahul Sharma

Hi,
What ever the special gl you are created or assigned to K in OBXT are will not allow to post down payment. in FB60 by using these special gl indicators we can post invoice.
Go to OBXR and assign F is for down payment request if it is not there. before assign in OBYR delete the assignment in OBXT. Defaulty the F is used for down payment requests only.
Hope this is clear, if yes assign points, any problem revert me
Regards,
Sankar

Error on posting vendor invoice

Hi Gurus,
Have encountered an error while posting transactions thru idoc. See error below:
Field Payt Terms is a required field for G/L account ABCD 201101
GL account 201101 is the recon account of the vendor. Our entry is:
Debit Expense   XXX
Credit Vendor          XXX
Thanks,
Ellicec

Hi:
               The error could easily be searched on SDN. Its very simple things that system will pop up such error if basic configuration is missing in your field status group for vendor reconciliation account OBC4....your Vendor recon field status group (G067 by standard) ....Payment transactions...Payment term. Payment term has been set as mandatory over there or in posting key for crediting vendor in OB41. So you must enter payment term while entering data in FB60.
Regards

Error while posting 561 Document

Dear All
Error while posting document with movement 561. "Account Determination for entry 999 BSA 6000 not possible."
Even OBYC setting for that valuation class already assigned.
please advice.
Regards
Kumar.

Hello Anandhakumar ,
please check whether you have assigned the Company code which you are using to controlling area with same chart of accounts and check the OMWD settings..
and check the FS02 tCode in that the see the control data for currency and chart of accounts settings.
it could solve your query.
regards,
Ninad Kshirsagar

Error while posting the CREMAS03 Idoc

Hi
I a getting the Error while posting CREMAS03 idoc from File
The ERROR: Status 65 ,Error in ALE Servics: Cross Company code does not exits..
but when i cheked with the functional guys , the comany code exits..
Any one have any idea
SV

Hey,
    seems you have given wrong enteries for logical system in sale or in WE20(patrner profile)
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.

Error while posting GR

Hi
We are facing a error while posting GR for a PO, error we are getting is "Account determination for entry 1000 FR3 0002 not possible".
now we have checked that for the mentioned plant(val area) and co code val. grp code is 0002 only, and FR3 is picked by the system because of the condition type used (which is a Z020 and manual one).
please help.
regrds
Yogesh

Hi Yogesh,
Maintain the GL account as mentioned by Ramki that will solve your problem. Or else u must not give an customs duty charges in PO then it will not hit that particular GL and you can post the GR
Hope this helps.
regards
Anand.C

Error while posting with Segment

Hi,
I am trying to post an entry using t- code f-02.. and i am assigning a profit center to the line item. I have also assigned a segment to my profit center....
But while posting the document i am getting the following error..
<i><b>You do not have any authorization for segment ED and function 01
Message no. FAGL_POST_SERVICE022
Diagnosis
You do not have authorization to perform function 01 for segment AA. The record type is 0.
Procedure
Contact your system administrator. Add the missing authorizations for object F_FAGL_SEG.</b></i>
Please let me know what needs to be done to rectify the above error.
Thanks and regards,
Ankur

Brother! after getting error, call transacxtion SU53, you will get the list that you have missed autorization
for this,contact your basis team memeber for authorization problem.
thanks

ABAP error on posting MR11 entries

Similar Messages

Maybe you are looking for