ABAP exception monitoring with Nagios

Hi all,
is it possible to monitoring ABAP exception generated by an ABAP proxy receiver with Nagios? If yes, how?
Thanks

problem solved... external tables are the solution

Similar Messages

Monitoring with nagios:check_logfiles

Hi,
I'm planning to use check_logfiles to monitoring oracle logfiles. The implementation for the alertlog seems to be easy, see:
http://labs.consol.de/lang/en/nagios/check_logfiles/
cause it is possible to store the alertlog in a table. My question is: Can I store logfiles from RMAN in a table too? I'm not skilled with RMAN... we have a repository-database, and I looked for logs in this database, but I can't find them...(if they exists).
Not so important, but it would be nice to know: Is it possible to store the logs of a datapump-export in a table?!
thx for help
PS using nrpe and nagios_plugins on the database-servers is (at the moment) not possible :-(
Edited by: user10650608 on 19.01.2010 09:57

problem solved... external tables are the solution

CCX monitoring with Nagios

Hi,
has anyone experience with the monitoring of a ccx system withX nagios and can help me, how can I set up a monitoring of the most important services.
Thank you
Ben

Ben,
Ideally, to receive quick responses, this thread should have been opened at Contact Center section. If the moderator doesnt move it, I suggest opening one more thread there.
GP.

Install RFC SDK on RedHat to Monitoring with Nagios.

Hello Everyone,
i'm trying to install the RFC SDK to connect this via Nagios with the Checch_sap.pl . this check needs to use sapinfo.
Where i can find the RFC SDK with sapinfo?
thank you very much in advance!

Hello Everyone,
i'm trying to install the RFC SDK to connect this via Nagios with the Checch_sap.pl . this check needs to use sapinfo.
Where i can find the RFC SDK with sapinfo?
thank you very much in advance!

Monitor NSM with Nagios

Hi,
Want to monitor main features of NSM-engine like deferred tasks or engine doesn't accept events with nagios.
Has anyone an idea how to solve this?
Regards
Martin

mars24,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

How do i run an external monitor with my macbook and change settings so that when i close the lid the signal to the monitor is not lost and i can continue using the mac with a mouse and a wireless keyboard?

No, nothing will prevent the computer from going to sleep when you close its display except third-party hacks that are designed to do exactly that. I strongly advise against using any of those, as they may interfere with successful entry into clamshell mode (and they carry other downside risks as well). Just wait until the computer is asleep (with its sleep light pulsing), then press any key on the keyboard. It sounds as though your setup is working as it's designed to do.

System Monitoring with Solution Manager Ehp1

Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.

Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
==   Checking profile:     /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
               with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
          with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key:   10 Pool
            Size configured.....:   642000000 ( 612.3 MB)
            Size min. estimated.:   637597428 ( 608.1 MB)
            Advised Size........:   640000000 ( 610.4 MB)
Key:   40 Pool for database buffers
            Size configured.....: 1048000000 ( 999.4 MB)
            Size min. estimated.: 1468229308 (1400.2 MB)
            Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key:        1 Size:        2500 (   0.0 MB) System administration
Key:        4 Size:      523648 (   0.5 MB) statistic area
Key:        7 Size:       14838 (   0.0 MB) Update task administration
Key:        8 Size:    67108964 ( 64.0 MB) Paging buffer
Key:        9 Size:   134217828 ( 128.0 MB) Roll buffer
Key:       11 Size:      500000 (   0.5 MB) Factory calender buffer
Key:       12 Size:     6000000 (   5.7 MB) TemSe Char-Code convert Buf.
Key:       13 Size:   200500000 ( 191.2 MB) Alert Area
Key:       16 Size:       22400 (   0.0 MB) Semaphore activity monitoring
Key:       17 Size:     2672386 (   2.5 MB) Roll administration
Key:       30 Size:       37888 (   0.0 MB) Taskhandler runtime admin.
Key:       31 Size:     4806000 (   4.6 MB) Dispatcher request queue
Key:       33 Size:    39936000 ( 38.1 MB) Table buffer, part.buffering
Key:       34 Size:    20480000 ( 19.5 MB) Enqueue table
Key:       51 Size:     3200000 (   3.1 MB) Extended memory admin.
Key:       52 Size:       40000 (   0.0 MB) Message Server buffer
Key:       54 Size:    20488192 ( 19.5 MB) Export/Import buffer
Key:       55 Size:        8192 (   0.0 MB) Spool local printer+joblist
Key:       57 Size:     1048576 (   1.0 MB) Profilparameter in shared mem
Key:       58 Size:        4096 (   0.0 MB) Enqueue ID for reset
Key:       62 Size:    85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key:        2 Size:    31168040 ( 29.7 MB) Disp. administration tables
Key:        3 Size:   114048000 ( 108.8 MB) Disp. communication areas
Key:        6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key:       14 Size:    28600000 ( 27.3 MB) Presentation buffer
Key:       19 Size:    90000000 ( 85.8 MB) Table-buffer
Key:       42 Size:    13920992 ( 13.3 MB) DB TTAB buffer
Key:       43 Size:    43422392 ( 41.4 MB) DB FTAB buffer
Key:       44 Size:     8606392 (   8.2 MB) DB IREC buffer
Key:       45 Size:     6558392 (   6.3 MB) DB short nametab buffer
Key:       46 Size:       20480 (   0.0 MB) DB sync table
Key:       47 Size:    13313024 ( 12.7 MB) DB CUA buffer
Key:       48 Size:      300000 (   0.3 MB) Number range buffer
Key:       49 Size:     3309932 (   3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key:       18 Size:     1792100 (   1.7 MB) Paging adminitration
Key:       41 Size:    25010000 ( 23.9 MB) DB statistics buffer
Key:       63 Size:      409600 (   0.4 MB) ICMAN shared memory
Key:       64 Size:     4202496 (   4.0 MB) Online Text Repository Buf.
Key:       65 Size:     4202496 (   4.0 MB) Export/Import Shared Memory
Key:     1002 Size:      400000 (   0.4 MB) Performance monitoring V01.0
Key: 58900130 Size:        4096 (   0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....:         73
System-imposed number of shared memories.:       1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB,   99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool:   34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................:    1
Warnings detected................:    9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
      additional CENTRAL system y/[n] ?   :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
      CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
      compiled at   Jun 28 2010
      systemid      324 (IBM RS/6000 with AIX)
      relno         6400
      patch text    patch collection 2010/1, OSS note 1304480
      patchno       335
INFO Runtime:
      running on    saptqa01 AIX 3 5 00069A8FD600
      running with profile   /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
      alert/MONI_SEGM_SIZE = 200000000
      alert/TRACE          = 1
      SAPSYSTEM            = 30
      SAPSYSTEMNAME        = TQA
      SAPLOCALHOST         = saptqa01
      DIR_CCMS             = /usr/sap/ccms
      DIR_LOGGING          = /usr/sap/TQA/DVEBMGS30/log
      DIR_PERF             = /usr/sap/tmp
INFO:
      pid           4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
        segment status     ENABLED
        segment started at Tue Sep 14 09:35:56 2010
        segment version    20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
       Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
       Please change configuration with profile parameters
           ipc/shm_psize_01 = -<different pool nr>
       xor
           ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1

Soap to proxy scenario Getting exception caught with cause   error

Hi Experts,
MY scenario is soap to proxy i am getting below exception message in advanced engine configuration in ICO.
OAP: request message entering the adapter with user J2EE_GUEST
09/10/2014 11: 06: 03 346 XI Information Packaging (Bulk Mode) is not Enabled, Proceeding to the Normal Processing.
09/10/2014 11: 06: 03 346 XISOAP Information: Received an XI message for processing
09/10/2014 11: 06: 03 598 Error SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
09/10/2014 11: 06: 03 598 Information SOAP: completed the processing
OAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
09/10/2014 11: 06: 03 598 Information SOAP: completed the processing
09/10/2014 11: 06: 03 598 Information SOAP: response message to continuing 7477aafa-38da-11e4-beed-00000028af0a
09/10/2014 11: 06: 03 599 Error MP: exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
09/10/2014 11: 06: 03 599 Error SOAP: error occured: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter / parsing / ADAPTER.SOAP_EXCEPTION - soap fault: Error in processing the Web Service; Other details in the error log of the Web Service from the provider side (Registration UTC 20,140,910,110,603; 6EDA38E4CE67F1B3B939005056882C3A transaction ID)
payload is contains some special charters in which is in protiguse language
example.
• AWPJ SERV DE TERCERIZ and
dot is the special char
same payload while testing using sproxy tcode dot "•" is converting in " # "symbol and with out error its successfully updating the database in ECC.
while testing using the same payload using soap ui removing the dot symbol from the field its successfully processing and updating the database.
is this interface is failing in PI level ? or ECC i am not getting dump in ecc.
is there any special character conversation in sap pi level.
where this message exactly failing is in PI level or in ECC level?
Help us find the solution.

Hi Ravinder,
When you mark the option Do not use SOAP envelope the adapter will not generate the SOAP envelope therefore you need to set an extra mapping in the Request to wrap the SOAP envelope. For example with XSL:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:output method="xml"/>
    <xsl:template match="/">
        <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
            <SOAP:Header/>
            <SOAP:Body>
                <xsl:copy-of select="/"/>
            </SOAP:Body>
        </SOAP:Envelope>
    </xsl:template>
</xsl:stylesheet>
Later in the response you will have the SOAP envelope tags. (You can do a first try without java mapping only to see in the monitoring the response with the junk character).
When you determine the junk character you can try to use and to modify the next java mapping SAP PI - Deciphering apostrophes in XML - Process Integration - SCN Wiki to deal with your problem.
Hope this helps.
Regards.

Monitoring with HP OpenView

Has anyone implemented 11i and/or 10g Portal and set up application monitoring using HP OpenView? Are there any templates or requirements documents that can be used?

Hi Michael,
Based on what i have read
SAPCCMSR is a file deployed to collect data from systems and send it to Central system for monitoring. The extension -j2ee is used to monitor systems with only java stack.
GRMG is used for availability monitoring of components and scenarios in your java and abap landscape. GRMG does not pull performance and other data for the components.
GRMG is very useful for monitoring components which do not have a datasupplier associated to connect to Central Monitoring Systems (CEN).
The avaialability of components can also be monitored with CCMSPING agent.
Hope this is helpful
Regards,
Raghavan

WebDynpro Exception: IDs with Namespace Must Have the Format / namespace /

Hi Experts,
    Can you please help me with this:
    I get the following error when I execute a webdynpro application. Can you please let me know where do
    I need to look to verify the <namespace> and <id>.
   Error when processing your request
What has happened?
The URL http://sapdev.tfi.local:8000/sap/bc/webdynpro/sap/z_temp_disp_mara/ was not called due to an error.
Note
The following error text was processed in the system DEV : WebDynpro Exception: IDs with Namespace Must Have the Format /<namespace>/<id>
The error occurred on the application server sapdev_DEV_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CONSTRUCTOR of program CL_WDR_VIEW_ELEMENT===========CP
Method: CONSTRUCTOR of program CL_WD_TABLE_COLUMN============CP
Method: NEW_TABLE_COLUMN of program CL_WD_TABLE_COLUMN============CP
Method: IF_WDR_VIEW_DELEGATE~WD_CREATE_UI_TREE of program /1BCWDY/6JQCRML58TRPAX42J5MQ==CP
Method: CREATE_UI_TREE of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system DEV in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server sapdev_DEV_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server sapdev_DEV_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Edited by: arshad mohammed on Sep 24, 2009 2:19 AM

Hello experts,
i got the same error but we use sap basis 700 with sps 15. What to do here?

The following ABAP Exception occurred: USER_NOT_FOUND

Hi,
A few of my users are receiving the following error :
The following ABAP Exception occurred: USER_NOT_FOUND
This only occurs when accessing webdynpro iviews. BSP iviews such as LSO (Learning Solution), SAP transaction iviews etc all work fine.
The SU01 ECC accounts are all valid and have the neccessary roles. Communications (IT0105) have also been assigned and have valid dates.
Both users have worked fine with no problems for several years and all of a sudden they have this error.
We use a Novell LDAP for authentication which is shared by muliple applications and the UME is using dataSourceConfiguration_novell_not_readonly_db.xml
I have tried deleting and recreating the accounts but this makes no difference. If I create new accounts with a different username they work fine with no problems. But this is not a suitbale work around, plus I would like to find out why this is happening.
Any advice appreciated
Thanks
Craig

Hi Craig,
Can you please tell in detail what was wrong with the structural authorisations.
We are also facing the same issue.
Thanks
Amit

RFC Exception COMMUNICATION_FAILURE with Message RFC destination RFC does n

Hi all , i did a small application in webdynpro abap by calling BAPI . MY application is when i enter the studentid and click the submit button i shoutl get student details .
but when i'm clicking the submit button i'm gettting the error
"RFC Exception COMMUNICATION_FAILURE with Message RFC destination RFC does not exist. Occurred " can any one help me out.

hi rajeev.....
    i am sure that you would have used service call.
   in service call, in the destination part, you would have given a name. the service call automatically creates a destination in this name. but your user id would not have had that rights. so only you get this error. either use a already existing destination or get the access for that.
---regards,
   alex b justin

Benefits of Client Side Monitoring with SCOM 2012R2?

I'm working on the architecture for adding SCOM 2012R2 to our Windows network. Right now we use SCCM 2012R2 and SCEP. I'm trying to determine whether I should include our workstation computers as part of this or only servers. We won't
be doing Application Performance Monitoring (APM). So what would be the benefit of putting the SCOM agent on the workstations?
# When I wrote this script only God and I knew what I was doing. # Now, only God Knows!

Hi,
As it was mentioned by Yan Li_ first thing to do is the proper planning and comparing all pros and cons of SCOM client monitoring, depending on numbers of agent\agentless servers\workstations to be monitored. With a large number of agentless monitored
clients, it makes sense to have a separate SCOM infrastructure.
As well, please look at this links:
http://stefanroth.net/2013/05/27/scom-agentless-exception-monitoring-aem-faq/
http://stefanroth.net/2013/05/14/scom-2012-custom-aem-reports/
http://www.ms-opsmgr.eu/?p=332
Natalya
### If my post helped you, please take a moment to Vote as Helpful and\or Mark as an Answer

Getting Error : WebDynpro Exception: IDs with Namespace Must Have the

Hi Experts,
I am getting following error while running Webdynpro application, Please give me solution
The following error text was processed in the system E6I : WebDynpro Exception: IDs with Namespace Must Have the Format /<namespace>/<id>
The error occurred on the application server HCSAP2950-1_E6I_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CONSTRUCTOR of program CL_WDR_VIEW_ELEMENT===========CP
Method: CONSTRUCTOR of program CL_WD_TABLE_COLUMN============CP
Method: NEW_TABLE_COLUMN of program CL_WD_TABLE_COLUMN============CP
Method: IF_WDR_VIEW_DELEGATE~WD_CREATE_UI_TREE of program /1BCWDY/AK98KQL1OONYBLIT9ARC==CP
Method: CREATE_UI_TREE of program CL_WDR_DELEGATING_VIEW========CP
Method: INIT_CONTROLLER of program CL_WDR_VIEW===================CP
Method: INIT of program CL_WDR_CONTROLLER=============CP
Method: GET_VIEW of program CL_WDR_VIEW_MANAGER===========CP
Method: BIND_ROOT of program CL_WDR_VIEW_MANAGER===========CPThanks,
satish

Hi,
SAP Notes 1242377, 1381873, 1389146
Threads:
WebDynpro Exception: IDs with Namespace Must Have the Format /<namespace>/<
regards, Lukas

Polling information from GroupWise (Monitor) to Nagios

Hi,
I am currently setting up a monitoring environment based on an Open Moniotoring Dustribution server (using a Nagios core). The setup performs fine so far and I am almost done figuring out how to get the data I want.
One of the big things left on my todo-list is our GroupWise-cluster. Since the cluster was installed and is serveiced by an external company and I have close to no knowledge of the inner workings of GroupWise, we as a group decided that it would be wise that I use read-only-SNMPv2 to monitor those servers. I wasn't exactly pleased when I learned that SNMP doesn't work on 64-Bit-Linux-servers.
After learning that we have a working GroupWise Monitor running, I was wondering if it is possible to poll Data from the GroupWise Monitor and get it to my Nagios-server.
If not, what else can I do in order to get my all of my monitoring done with Nagios.
Thanks
Fabian

Hi,
I thought it would come to a solution like this. I guess I dont't have to use/learn curl since this could also be done using any script-language.
I hoped to find someone here who has already written a script for that.
After talking to our GroupWise-guy I am left with two options:
1)Waiting for the next Version which is rumored to include SNMP for 64-Bit-Versions
2)Writing a script which would take time
I'm inclined to go for option 1 because of time restrains.
But thanks anyway.
Fabian

ABAP exception monitoring with Nagios

Similar Messages

Maybe you are looking for