Abap fresher

Hi,
please help me i m new to sap. can any one help me to learn abap reports with real time programming.
Moderator Message Take a classroom course. This is not a Training Forum.
Edited by: kishan P on Dec 1, 2010 9:42 AM

Similar Messages

ABAP Fresher resume

Hi,
I'm a Technical Writer with 2+ yrs of experience in IT. I'm pursuing a certification course in SAP ABAP/4. Can anyone guide me regarding the scope of getting a job as ABAP developer?
Can anyone provide a sample ABAP fresher resume?
Thanks,
Arathi

Hi,
Go to this link and post your question for certification. Not in this forum-
/community [original link is broken]
Regards,
Sujit

ABAP FRESHER WANT TO KNOW WHAT ARE ALL THE MANDT FUNCTION MODULES

WHAT ARE THE FUNCTION MODULES WANT TO KNOW AS A ABAP FRESHER, AND WHAT THINGS WANT TO LEARN THAT FUNCTION MODULES PLEASE GIVE ME SOME BRIEF PROCEDURE.
Moderator message: I suggest you read the Rules of Engagement of this forum first.
Edited by: kishan P on Nov 23, 2010 1:45 PM

Hi jyothi,
Thanks for your reply.
I know how to read the text elements, For the FM you said, i have to pass each langu (form t002) for each text element and check if it is maintained in that langu or not.
that was not my question, i should first know all the langu, so that i can use the READ statement for only those langu to get the texts.
checking for all the langu causes redundancy is what i feel.
Regards,
Sowjanya

Plz help ABAP fresher

i created selection screen lik this:-
S_BEGDA FOR P2001-BEGDA,
S_ENDDA FOR P2001-ENDDA,
S_BTRTL FOR P0001-BTRTL.
ZWSOABS is a table having only one field " ABSTYP ".
CAN ANYONE SEND THE CODE FOR THIS:-
1. Get Date(P2001- BEGDA and P2001- ENDDA) using selection criteria from selection screen
2. Get Personnel sub area from the table PA0001
3. Number of Occurrence is the Total number of Absences, which were recorded, in the specific period.
4. Get all the Absences from the table ZWSOABS which were recorded in the specific period (P2001- BEGDA and P2001- ENDDA).
5. Number of Workers is the Average number of workers who worked in the recording period excluding those persons who were absent from work on paid/unpaid leave for the entire period.
6. Get the Number of Workers from PA0000 using the following:
- Select Count (*) from PA0000 where PA0000-ENDDA = 31/12/9999 and PA0000-STAT2 = 3
7. Perform the report
I WANT TO DISPLAY THIS FIELD (INCIDENT RATE) where
incident rate = Number of Occurrences in the period / Number of Workers * 100
YOUR HELP IS APPRECIATED.

I would suggest award points to the many people who have helped you in this other post first. Also, mark this one as closed, as now you have duplicate posts.
please help me for ABAP Fresher ..it's very urgent
Regards,
Rich Heilman

Abap fresher's doubt

SELECT distinct vbeln vbtyp vkorg vtweg spart vkgrp kunnr kostl
      FROM vbak
      INTO TABLE gt_vbak
      WHERE vbeln in s_vbeln-
      or vkorg = p_vkorg or
       vtweg = p_vtweg or
        spart = p_spart.
here: s_vbeln is select-option for vbak-vbeln.
problem with above query is that:
   if i enter only '5000' in s_vbeln then also it is giving additional fields like '50000011'

Moderator message - Welcome to SCN
Unfortunately, this forum is not a place to learn ABAP. I suggest that you get one of the good ABAP books that are out there and maybe join an internet forum that caters to beginners
post locked
Please read [Rules of Engagement|https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement], How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
Rob

Hi Gurus ABAP FRESHER RESUME

Hi gurus,
i want ABAP Freshers sample resume.
please help me.
Please send the resume to this mail id [email protected]
Thanks & Regards
raja

Name : XXXXXXXXXX
Phone No. XXXXXX
Email ID :XXXXXXx
Objective
              Looking far ward for an opportunity in a challenging environment, where I can utilize my experience and skills and contribute to the success of organization and also for improving my personal skills.
ACADAMIC QUALIFICATIONS:
     ..
     M.P.C form Board of Intermediate.
      S.S.C from Board of Secondary.
SOFTWARE SKILLS:
Programming Languages      :     C, C++, and Java.
Operating System           :     MS-Dos, Windows.
Package                :     MS-Office.
DBMS                     :     Dbase 3Plus, SQL.
Methodologies           :     UML, Rational Rose.
Concepts                :     DBMS, Software Engineering.
Web Technologies               :         HTML, Dhtml, Dream weaver, FrontPage.
ERPs:
SAP R/3-ABAP 4.7C
     ABAP Workbench tools (Data Dictionary).
     ABAP-Reports (Classical & Interactive).
     ALVs with Function Modules.
     Interfaces, File Handling, Call Transaction, Dialog Programming, Performance Tools.
     SAP Scripts, Smart Forms.
     User Exits / Enhancements.
     Conceptual Knowledge of ALE, IDOCs, EDI, BAPI, Workflow.
PROFESSIONAL NON-SAP EXPERIENCE:
     Project #1:
Title               :     XXXXXXXXXXXXXXX
Client               :     XXXXXXXXXXXXXXXX.
Environment          :     XXXXXXXX
Duration          :     Dec2003 to Mar2004
Description: The main objective of this project is to achieve a secure data communication. In this project I have used TCP/IP socket programming for exchange of data. The process overall work asynchronously have also provide security for the data being transmitted using the encryption and decryption algorithms. The data to be transmitted is first passed through the encryption algorithm to provide cipher text is then transmitted serially using TCP/IP sockets. The received data cipher text at the other end is passed through the decryption algorithm to get the actual data.
Project   #2
Title                  :      XXXXXXXXX
Web site           :     XXXXXXXXX
Client           :      XXXXXXXXXXX
Organization     :     XXXXXXXXXXXXX.
Environment          :         HTML, Dhtml, Dream weaver.
Role               :     Involved in coding, design and development.
This is an informative web site planned by XXXXXXXXXX, XXXXXXX Authorities to give information to the people about department activities, tourist information, and business opportunities.
PERSONAL PROFILE:
Name                    :     XXXXXXXXXX
Fathers Name          :     XXXXXXXXXXXXXXX
Date of Birth               :     XXXXXXXX
Mother Tongue          :     XXXXXXX
Languages Known          :     XXXXXXXXXXXXXXX
Gender               :     XXXXXXXXXX
Hobbies               :     Watching Cricket, Listening to Music
Strengths               :     Honest & Self-Confidence
Address                :     XXXXXXXXXXX

Urgent job needed as abap fresher

hi all guys i urgently need a job i ab an abap certified consultant lookin 4 a job very desperately.
mail me at [email protected] if anybody have any openings.

Hi,
you can do this in two ways
1) In the select Query itself you mention under where clause
indicator = 'N'. i.e select * from db
                                      into table itab
                                       where indicator = 'N'.
2) in the loop include the same where clause like this.
   loop at itab into wa where indicator = 'N'.
     write : / fl1,
                fl2,
                fl3.
    endloop.
do it anyways your problem will be solved.
Reward some points.
Bye,
Anomitro

Please help me for ABAP Fresher ..it's very urgent

In my selection screen ...i wrote like this:
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    SELECT-OPTIONS : S_BEGDA FOR P2001-BEGDA,
                     S_ENDDA FOR P2001-ENDDA,
                     S_BTRTL FOR P0001-BTRTL.
SELECTION-SCREEN : END OF BLOCK B1.
Flow of the Report:-
1. Get Date(P2001- BEGDA and P2001- ENDDA) using selection criteria from selection screen
2. Get Personnel sub area from the table PA0001
3. Number of Occurrence is the Total number of Absences which were recorded in the specific period.
4. Get all the Absences from the table ZWSOABS which were recorded in the specific period (P2001- BEGDA and P2001- ENDDA).
5. Number of Workers is the Average number of workers who worked in the recording period excluding those persons who were absent from work on paid/unpaid leave for the entire period.
6. Get the Number of Workers from PA0000 using the following:
- Select Count(*) from PA0000 where PA0000-ENDDA = 31/12/9999 and PA0000-STAT2 = 3
7. Perform the report
Further Information:- The Incidence rate is the number of occurrences of injury/disease for each one hundred workers employed. The following formula should be applied:
Number of Occurrences in the period /Number of Workers * 100
The number of occurrences in the period refers to all cases of lost time injury/disease, which were recorded in the specific period. The number of workers is defined as the average number of workers who worked in the recording period. Persons who were absent from work on paid or unpaid leave for the entire period should be excluded from this calculation.
CAN ANYONE PLEASE SEND ME THE CODE?
YOUR HELP IS DEFINITELY REWARDED BY POINTS

In my selection screen ...i wrote like this:
SELECTION-SCREEN : BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_BEGDA FOR P2001-BEGDA,
S_ENDDA FOR P2001-ENDDA,
S_BTRTL FOR P0001-BTRTL.
SELECTION-SCREEN : END OF BLOCK B1.
PLEASE SEND THE CODE FOR THIS:-
Flow of the Report:-
1. Get Date(P2001- BEGDA and P2001- ENDDA) using selection criteria from selection screen
2. Get Personnel sub area from the table PA0001
3. Number of Occurrence is the Total number of Absences which were recorded in the specific period.
4. Get all the Absences from the table ZWSOABS which were recorded in the specific period (P2001- BEGDA and P2001- ENDDA).
5. Number of Workers is the Average number of workers who worked in the recording period excluding those persons who were absent from work on paid/unpaid leave for the entire period.
6. Get the Number of Workers from PA0000 using the following:
- Select Count(*) from PA0000 where PA0000-ENDDA = 31/12/9999 and PA0000-STAT2 = 3
7. Perform the report
Further Information:- The Incidence rate is the number of occurrences of injury/disease for each one hundred workers employed. The following formula should be applied:
Number of Occurrences in the period /Number of Workers * 100
The number of occurrences in the period refers to all cases of lost time injury/disease, which were recorded in the specific period. The number of workers is defined as the average number of workers who worked in the recording period. Persons who were absent from work on paid or unpaid leave for the entire period should be excluded from this calculation.
ZWSOABS contain only one field AWART(SAP FIELD).
CAN ANYONE PLEASE SEND ME THE CODE?
YOUR HELP IS DEFINITELY REWARDED BY POINTS

Regarding career as a SAP ABAP fresher

Hi All ,
My name is Rohit Prakash, I had done my certification from ATOS Bangalore in june 2012. After Struggling a lot I was able to find a contract to hire position for one of the MNC's in Bangalore. As the project is going to be over , I am again left in fix . I am having a relevant experience of 8 months .
Having knowledge on DDIC ,Reports,Enhancements, BAPIs , Dailog programming and web dynpro.
So please guide me and assist me if any suitable opening for 0.8 months experience candidate.
mail id : [email protected]
Contact no : 07760570955.
Thanks n Regards

Dear Rohit,
Don't loss hope first of all. There are still no. of job vacancy in the Market for real good developer, you just need to do some things. Like never stop learning. Participate on SCN, try to resolve PR's issues.
Keep practicing your concept, brush-up your skills.By this i won't miss a single interview opportunity.
And for that interview opportunity keep yourself update with job portal sites(career's of company, other sites like naukri.com ) and try to involve with person on LinkedIn and some FB groups is also there.
If i got some link, will share with you for sure...
All the very best.
Good Day..
--ChanS

Abap report103 movement type is done and 105 is NOT done.

HI,
Requirement need materials for which 103 movement type is done and 105 is NOT done.
Scenario: - Material comes in company means we do movement 103 for that. after that we do movt. type 105 for that material. I want those material document list that had 103 but not 105.
Means material has enters in company but movt. type 105 not done.
Please advice am abap fresher
Regards..
R.Sudhakar

Is possible Query in sap to get this only 105 not release report ?
ANS:
Quary table MSEG,
Check the table content with BWART = 105
Get the EBELN Nos.
Pass the EBELN into EKKO Table, Get the value of Field FRGKE.
if FRGKE <> 'G'.
ie. Document not yet released.

Work-Flow in ABAP

hi GURU's...
I am new to SAP ABAP fresher. I am interested in work-flow in abap. Material in internet is so confusing.
Can any one please help me out
thanks in advance...

Sorry. This is not a training forum. Please go on a course, buy a book, etc. And before posting anymore questions, please read the Rules of Engagement.
Topic locked.
Edited by: Matt on Apr 13, 2009 12:56 PM

How to get proper breakthrough in SAP ABAP

hi experts ,
i was going through different threads that getting job as SAP ABAP fresher is very tough .If i consider my profile i have only 3.5 years of software development experience .If i do ABAP then i will be fresher in SAP .
1)so how should i proceed to get a proper break through in this domain.
2)When is the Peak time for doing this course.
3)Is Master Degree Essential to get a break through in SAP ABAP.I have B.Sc IT
4)is Genovate /Bangalore / Mumbai is a proper place to get a breakthrough in SAP ABAP
Thanks and Regards
Samit Sarkar

Hello,
Welcome to the world of SAP ABAP! There is plenty of work at the moment, so you've chosen a good time to start.
I've been doing it for over 10 years, and I would recommend it to anybody.
As for your questions:
1) The best way to break into ABAP is do the courses BC400 and BC401. Then try to find a job where you can gain experience
2) These courses are held all the time
3) No special degree is required, you just need to know how to program BEFORE you try to learn ABAP
4) SAP is used all over the world, so don't worry about specific locations
Once you have done the training and have some on-the-job experience, then you should try to achieve certification.
hope this helps
Paul Bakker

How we can display the running time as an output by writting abap report?

hi to all,
my name ahmed iam just abap fresher.i know java/j2ee very well.
i want to display the runing time as an output of abap report.Is it possible if possible how.

Hi,
system field SY-UZEIT
WRITE : SY-UZEIT.
Regards,
V.Balaji
Reward if Usefull...

Whats is table type ? whats the use of it in abap?

hi,
i am ahmed abap fresher,
i want to know what is table type and whats the use of it. at what point/situation we utilize this table type.

Hi Ahmed ,
Table is apart of data dictionary.
Table is a sort of container where we store data.
For eg. you want to store customer record in the database.Now you will store that customer record against specific fields of the applicable table.
You can create or see table by means of transaction code se11.
There are 3 typesof tables available in SAP ABAP:
1. Transparent table
2. Pool table
3. Cluster table.
Transparent Table:
A physical table definition in the database for the table definition which is stored in the ABAP Dictionary for transparent tables when the
table is activated. The table definition is translated from the ABAP
Dictionary to a definition of the particular database.
Pooled table:
Pooled tables can be used to store control data (e.g. screen sequences,
program parameters or temporary data). Several pooled tables can be
combined to form a table pool. The table pool corresponds to a physical
table on the database in which all the records of the allocated pooled
tables are stored.
Cluster table:
Cluster tables contain continuous text, for example, documentation.
Several cluster tables can be combined to form a table cluster. Several
logical lines of different tables are combined to form a physical record
in this table type. This permits object-by-object storage or
object-by-object access. In order to combine tables in clusters, at
least parts of the keys must agree. Several cluster tables are stored in
one corresponding table on the database.
See the documetation at:
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/81/415d363640933fe10000009b38f839/frameset.htm
Reward if useful ...
Regards ,
Shankar GJ

Whats the important of " table-type " in sap abap?

hi,
i am ahmed. abap fresher.
i want to what use and importance of table-type in sap abap which comes in
                     datadictionary
                            V
                    data types
V----
V                         V                                 V
data element       structure                   table type
i want to know about table type. plz give a brief idea.
bye.

hi,
Transparent Tables
A transparent table in the dictionary has a one-to-one relationship with a table in the database. Its structure in R/3 Data Dictionary corresponds to a single database table. For each transparent table definition in the dictionary, there is one associated table in the database. The database table has the same name, the same number of fields, and the fields have the same names as the R/3 table definition. When looking at the definition of an R/3 transparent table, it might seem like you are looking at the database table itself.
Transparent tables are much more common than pooled or cluster tables. They are used to hold application data. Application data is the master data or transaction data used by an application. An example of master data is the table of vendors (called vendor master data), or the table of customers (called customer master data). An example of transaction data is the orders placed by the customers, or the orders sent to the vendors.
Transparent tables are probably the only type of table you will ever create. Pooled and cluster tables are not usually used to hold application data but instead hold system data, such as system configuration information, or historical and statistical data.
Both pooled and cluster tables have many-to-one relationships with database tables. Both can appear as many tables in R/3, but they are stored as a single table in the database. The database table has a different name, different number of fields, and different field names than the R/3 table. The difference between the two types lies in the characteristics of the data they hold, and will be explained in the following sections.
Table Pools and Pooled Tables
A pooled table in R/3 has a many-to-one relationship with a table in the database (see Figures 3.1 and 3.2). For one table in the database, there are many tables in the R/3 Data Dictionary. The table in the database has a different name than the tables in the DDIC, it has a different number of fields, and the fields have different names as well. Pooled tables are an SAP proprietary construct.
When you look at a pooled table in R/3, you see a description of a table. However, in the database, it is stored along with other pooled tables in a single table called a table pool. A table pool is a database table with a special structure that enables the data of many R/3 tables to be stored within it. It can only hold pooled tables.
R/3 uses table pools to hold a large number (tens to thousands) of very small tables (about 10 to 100 rows each). Table pools reduce the amount of database resources needed when many small tables have to be open at the same time. SAP uses them for system data. You might create a table pool if you need to create hundreds of small tables that each hold only a few rows of data. To implement these small tables as pooled tables, you first create the definition of a table pool in R/3 to hold them all. When activated, an associated single table (the table pool) will be created in the database. You can then define pooled tables within R/3 and assign them all to your table pool (see Figure 3.2).
Pooled tables are primarily used by SAP to hold customizing data.
When a corporation installs any large system, the system is usually customized in some way to meet the unique needs of the corporation. In R/3, such customization is done via customizing tables. Customizing tables contain codes, field validations, number ranges, and parameters that change the way the R/3 applications behave.
Some examples of data contained in customizing tables are country codes, region (state or province) codes, reconciliation account numbers, exchange rates, depreciation methods, and pricing conditions. Even screen flows, field validations, and individual field attributes are sometimes table-driven via settings in customizing tables.
During the initial implementation of the system the data in the customizing tables is set up by a functional analyst. He or she will usually have experience relating to the business area being implemented and extensive training in the configuration of an R/3 system.
Table Clusters and Cluster Tables
A cluster table is similar to a pooled table. It has a many-to-one relationship with a table in the database. Many cluster tables are stored in a single table in the database called a table cluster.
A table cluster is similar to a table pool. It holds many tables within it. The tables it holds are all cluster tables.
Like pooled tables, cluster tables are another proprietary SAP construct. They are used to hold data from a few (approximately 2 to 10) very large tables. They would be used when these tables have a part of their primary keys in common, and if the data in these tables are all accessed simultaneously. The data is stored logically as shown in Figure 3.3.
Figure 3.3 : Table clusters store data from several tables based on the primary key fields that they have in common.
Table clusters contain fewer tables than table pools and, unlike table pools, the primary key of each table within the table cluster begins with the same field or fields. Rows from the cluster tables are combined into a single row in the table cluster. The rows are combined based on the part of the primary key they have in common. Thus, when a row is read from any one of the tables in the cluster, all related rows in all cluster tables are also retrieved, but only a single I/O is needed.
A cluster is advantageous in the case where data is accessed from multiple tables simultaneously and those tables have at least one of their primary key fields in common. Cluster tables reduce the number of database reads and thereby improve performance.
For example, as shown in Figure 3.4, the first four primary key fields in cdhdr and cdpos are identical. They become the primary key for the table cluster with the addition of a standard system field pageno to ensure that each row is unique.
Reward if helpful
Jagadish

Abap fresher

Similar Messages

Maybe you are looking for