ABAP-HR - CREATING CUSTOM INFOTYPES
While creating custom infotypes, what happens when we click "All" Push button in 2nd phase in PA Submodule?
Why not try it and find out. Oh, and don't post in all CAPITALS.
Similar Messages
-
Creating Custom Infotype - Personnel Administration - ABAP-HR
What are the steps while creating custom infotype in PA Subodulein ABAP-HR?
Hi,
Welcome to SCN. I've moved your post to a more appropriate place where there is more likelihood of the question being answered.
Be sure to read the "rules of engagement" for the forums and do search before posting.
I found below thread and link with simple search:
Infotype enhancement - Short dumps (PA30 / PM01).
http://www.sap-img.com/human/how-to-create-a-hr-infotype.htm
Regards,
Naveen -
How we create custom infotype and how to configure with its subtypes.
hai abap-hr gurus,
how to create custom infotype and how to configure with its subtypes. when i am creating infotypes i am not getting how to configure subtypes.
plz help me for this with an example code.
thanks..
kiran kumarHi Kiran,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screen Select `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appears here you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Regards,
Ramakrishna kotha. -
How to create custom infotype for training and event management
hai freinds can any one tell me how to create custom infotype for training and event managment with following fields
PS No PA0000-> PERNR
Name - PA0001 -> ENAME
IS PS.No. PA0001-> PS no. of Immediate Superior
IS name PA0001 -> ENAME
thanx in advance
afzalHi,
Your question is not clear for me. Since it is a TEM infotype, it could be a PD infotype.
If you wish to create a PD infotype, use transaction PPCI to create the infotype.
But before that you need to create a structure HRInnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
If you wish to create a PA infotype, use transaction PM01 to create the infotype.
But before that you may be required to create a strcuture PSnnnn (where nnnn is the infotype number) with all the fields relevant for the infotype.
Regards,
Srini -
About to use HR_INFOTYPE_OPERATION to create customer infotype issue:
hi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
pa9004-begda = '20080318' , pa9004-endda = '20080318'
pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
the three scenario is:
set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
create other infotype of SAP owner.
and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
CLEAR P_FLAG.
CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
PP_ACTION = IT_PA9004-ACTION.
PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
IF P_FLAG IS INITIAL.
if test_run = space.
COMMIT WORK.
else.
ROLLBACK WORK.
endif.
write:/ it_pa9004-pernr,'insert ok'.
ELSE.
ROLLBACK WORK.
write:/ it_pa9004-pernr,'error'.
ENDIF.
PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM. " ACTION_INSERT
FORM LOCK_EMPLOYEE USING P_PERNR
CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
number = P_PERNR
IMPORTING
return = P_RETURN
EXCEPTIONS
OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
EXPORTING
pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
PP_FLAG = '1'.
ENDIF.
ENDFORM. " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING P_PA9004 LIKE IT_PA9004
P_ACTION type PSPAR-ACTIO
CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
P_SUBTY TYPE P9004-SUBTY,
PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
PP_9004-AEDTM = SY-DATUM.
PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
PP_9004-AEDTM = SY-DATUM.
PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '9004'
subtype = 'FQ03'
subtype = P_SUBTY
number = PP_9004-pernr
validityend = PP_9004-ENDDA
validitybegin = PP_9004-begda
RECORDNUMBER = pp_9004-seqnr
record = PP_9004
operation = 'INS'
operation = P_ACTION
nocommit = 'X'
IMPORTING
return = P_RETURN
key = bapipakey
EXCEPTIONS
OTHERS = 0.
IF P_RETURN IS NOT INITIAL.
PP_FLAG = '9'.
ENDIF.
ENDFORM. " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING
number = p_pernr
IMPORTING
return = P_RETURN
EXCEPTIONS
OTHERS = 01.
ENDFORM. " UNLOCK_EMPLOYEEhi
i want to create infotype use function(HR_INFOTYPE_OPERATION).
this infotype is customer infotype.
the first scenario is:
i'm be sure no data about one employee in this infotype(9004).
to call with data upload function and put data into internal table IT_PA9004.
and the table data as follow:
one line: it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
it_pa9004-zzvalue = 50 (customer field).
two line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080201' , it_pa9004-endda = '20080930'
it_pa9004-zzvalue = 60 (customer field).
three line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 70 (customer field).
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 80 (customer field).
i run the programme and get information is:
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
11022887 insert ok.
but i use the transation PA30 to view all data:
in database just exist one row:
four line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ03',
it_pa9004-begda = '20080101' , it_pa9004-endda = '20081031'
it_pa9004-zzvalue = 80 (customer field).
the second scenario is:
in database the infotype have exist one row:
pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
pa9004-begda = '20080318' , pa9004-endda = '20080318'
pa9004-zzvalue = X (customer field).
and i create another row:
line:it_pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
it_pa9004-begda = '20080318' , it_pa9004-endda = '99991231'
it_pa9004-zzvalue = 80 (customer field)
i run the programme and get information is:
11022887 insert ok.
but in database just exist the first data
pa9004-pernr = '11022887' ,it_pa9004-subty = 'FQ02',
pa9004-begda = '20080318' , pa9004-endda = '20080318'
pa9004-zzvalue = X (customer field).
the three scenario is:
set HR_INFOTYPE_OPERATION of import parameter operation = 'MOD'
in any scenario will get error :not exist subtype .
what heppend about HR_INFOTYPE_OPERATION working,i had to use this function to
create other infotype of SAP owner.
and will create successfully.
so i thank it may be config Constraints about customer infotype.
is time Constraints effect?
so i want to how to check it?
and if i want to create one infotype for customer using PM01 what some thing
must be taken into account.
think you advance.
partial source code as follow:
FORM ACTION_INSERT .
DATA: P_FLAG TYPE C.
DATA: WA_LOG LIKE LINE OF DATA_LOG.
DATA: PP_ACTION TYPE PSPAR-ACTIO.
LOOP AT IT_PA9004.
CLEAR P_FLAG.
CALL FUNCTION 'HR_PSBUFFER_INITIALIZE'.
PERFORM lock_employee USING IT_PA9004-pernr CHANGING P_FLAG.
PP_ACTION = IT_PA9004-ACTION.
PERFORM HR_INFOTYPE_OPERATION USING IT_PA9004 PP_ACTION CHANGING P_FLAG.
IF P_FLAG IS INITIAL.
if test_run = space.
COMMIT WORK.
else.
ROLLBACK WORK.
endif.
write:/ it_pa9004-pernr,'insert ok'.
ELSE.
ROLLBACK WORK.
write:/ it_pa9004-pernr,'error'.
ENDIF.
PERFORM unlock_employee USING IT_PA9004-pernr .
ENDLOOP.
ENDFORM. " ACTION_INSERT
FORM LOCK_EMPLOYEE USING P_PERNR
CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
CLEAR P_RETURN.
CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
EXPORTING
number = P_PERNR
IMPORTING
return = P_RETURN
EXCEPTIONS
OTHERS = 01.
CALL FUNCTION 'HR_INITIALIZE_BUFFER'
EXPORTING
pernr = P_PERNR.
IF P_RETURN IS NOT INITIAL.
PP_FLAG = '1'.
ENDIF.
ENDFORM. " LOCK_EMPLOYEE
FORM HR_INFOTYPE_OPERATION USING P_PA9004 LIKE IT_PA9004
P_ACTION type PSPAR-ACTIO
CHANGING PP_FLAG.
CHECK PP_FLAG IS INITIAL.
DATA: bapipakey type bapipakey,
P_SUBTY TYPE P9004-SUBTY,
PP_9004 TYPE TABLE OF P9004 WITH HEADER LINE.
CLEAR P_RETURN.
REFRESH PP_9004.
MOVE-CORRESPONDING P_PA9004 TO PP_9004.
IF P_ACTION = 'INS'.
PP_9004-AEDTM = SY-DATUM.
PP_9004-UNAME = SY-UNAME.
ENDIF.
IF P_ACTION = 'MOD'.
PP_9004-AEDTM = SY-DATUM.
PP_9004-UNAME = SY-UNAME.
ENDIF.
APPEND PP_9004.
P_SUBTY = P_LGART.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
infty = '9004'
subtype = 'FQ03'
subtype = P_SUBTY
number = PP_9004-pernr
validityend = PP_9004-ENDDA
validitybegin = PP_9004-begda
RECORDNUMBER = pp_9004-seqnr
record = PP_9004
operation = 'INS'
operation = P_ACTION
nocommit = 'X'
IMPORTING
return = P_RETURN
key = bapipakey
EXCEPTIONS
OTHERS = 0.
IF P_RETURN IS NOT INITIAL.
PP_FLAG = '9'.
ENDIF.
ENDFORM. " HR_INFOTYPE_OPERATION
FORM UNLOCK_EMPLOYEE USING P_PERNR.
CALL FUNCTION 'BAPI_EMPLOYEE_DEQUEUE'
EXPORTING
number = p_pernr
IMPORTING
return = P_RETURN
EXCEPTIONS
OTHERS = 01.
ENDFORM. " UNLOCK_EMPLOYEE -
Create Custom Infotype and handle Modification/Updation
Hi All,
I need to create a custom infotype and handle few checks while creating/updating the existing one.
I have gone through the existing threads and have figured out the creation part.
Could anyone tell me where i need to code the checks while creating/updating.
I tried editing the PBO/PAI of the Module pool program, but as its standard, is asking for access key. Do we need to code this in any userexit or implement BADI.
For example,
a) i need to check that only one instance of the infotype should be valid for an
employee at a time
b) This infotype should be created for only Employees and not contingent workers.
c) Few fields on the body section needs to be updated/modified.
Thanks and Regards
Manish.You can use the IN_UPDATE or AFTER_INPUT Methods of the BAdI HRPAD00INFTY to perform your validations.
Arya -
Error imparting while creating Customized infotypes
Dear Expert,
I am working on customized infotype for the PA module.
i am creating through PM01, i have update the fields and save, check and activate the structure then i go back to PM01 main screen the following warning massage imparting. for reference following screen shot
But still i go back and click on technical attribute button for the maintain the details. the new warning massage
Please help me out how to resolved this issue, i am unable to do the customized infotypes.
Thanks
UrvashiHi Urvashi,
The field names of your infotypes better have to start with ZZ* like ZZWRITE or ZZREAD. This would avoid 2 warnings.
The other 2 warnings are caused because you didn't set an enhancement category for your structure PS9002.
If you're creating a new infotype, please use the button "generate objects" in place of edit.
Afterwards, you could go to each step with the edit button.
Best regards,
Jonathan -
Create Custom Infotype using PPCI
Hi,
My requirement is to create an HRinfotype . I am trying to create a new custom infotype (9500) via transaction PPCI, categeory when i select the option user should use Transaction PO10 and choosing the org unit, user should be able to choose my custom Infotype 9004 Site type and Industry and select Create/Edit/Delete.
For this we follow the below given steps :-
Step1: Create structures as mentioned in the HRI9004
Step2: Using transaction PPCI create field infotype.
Step3: In table T777I assign the new infotype to the standard object type Org unit and define the time constraint.
Can any body help me or send me any document to start from step 2 . i.e Using transaction 'PPCI' .Hi,
Look into the path below
http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/PAXX/PYINT_INFOTYP_PD.pdf
Regards
Pavan -
Hi,
I want to create a custom infotype with the following fields.
Molga (country grouping)
Personnel Number
Subtype
Language Key
Comment Line 1
Comment Line 2
Comment Line 3
in this first 4 fields are keys. The user should be able to edit only the rest of the fields.
Subtypes similar to the infotypes values 0168,0169,0014,0015,0009,0006,0002 should be created.
While updating and saving the infotypes 0168,0169,0014,0015,0009,0006,0002 the system should prompt this infotype through dynamic action to enable the user to enter comments.
can anyone give me a step by step approach for creating this infotype?
Thanks in advance...
VijayHi
Steps to create a HR Infotype:
1) Go to Transaction PM01.
2) Enter the custom Infotype number which you want to create (Should be a 4 digit number, start with 9).
3) Select the 'Employee Infotype' radio button.
4) Select the 'PS Structure Infotype'.
5) Click on Create... A separate table maintenance window appears...
6) Create a PS structure with all the fields you want on the Infotype
7) Save and Activate the PS structure
8) Go back to the initial screen of PM01.
9) Click on 'All' push button. It takes a few moments.
10) Click on 'Technical Characteristics'. Infotype list screen appears
11) Click on 'Change'(pencil) button
12) Select your Infotype and click on 'Detail' (magnifying glass) button
13) Give 'T591A' as subtype table
14) Give 'T591S' as subtype txt tab
15) Give your subtype field as subtype field
16) Save and come back to PM01 initial screen
17) Click on 'Infotype Characteristics' ... Infotype list screen appears
18) Click on 'Change' (pencil) button
19) Click on 'New Entries'
20) Enter your Infotype number and short text
21) Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference to fill yours)
22) Save your entries.
23) Now the Infotype is created and ready to use.
24) If you want to change the layout of the Infotype as per your requirement...
25) In the PM01 initial screen...Select 'Screen' radio button and give 2000 as the screen name, then click on edit.
26) In the next screen.. Select 'Layout Editor' and click 'Change'.
27) Screen default layout appears...here you can design/modify the screen..change the attributes of the fields..etc.
28) Save and activate. (Don't forget to 'Activate at every level)
Subtype Creation :
Transaction PM01 Goto Subtype Characteristics. Click on Append and then subtype. Enter the name and description of subtype on screen.
Then goto technical Characteristics and maintain the details of subtype there. I.e name of subtype i.e. component name defined in PSnnnn. Subtype table is T591A.
Subty.text tab is T591S and time const tab is T591A.
See:
http://help.sap.com/saphelp_46c/helpdata/en/4f/d5268a575e11d189270000e8322f96/content.htm
HR related site:
http://www.sapdevelopment.co.uk/hr/hrhome.htm
Enhancement of Infotype
Check the following
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PAXX/PYINT_INFOTYP.pdf
Infotype Enhancement overview screen
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/60a7586d-edd9-2910-68a8-8204303835a1
Regards
Anji -
Steps For creating Custome Infotype
Hello everybody ,
please give me the steps for creation custom infotypeHi
[Check This |https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action?pageId=10974]
Regards
Pavan -
Creating / updating Custom infotype with different screen
Hi All,
I have created custom infotype having different screen for different subtype(1,2).
From Subtype 1, indotype is automatically updated as it is a standard program. But for subtype 2 i am using HR_INFOTYPE_OPERATION for updating the record which is ending with error, as employee which i am trying to update is already locked by me only through PA30. So this function module ends with Complex error. Please suggest how to update the infotype with subtype 2.
Thanking you..
Best regards
AkshayHi All,
I have created custom infotype having different screen for different subtype(1,2).
From Subtype 1, indotype is automatically updated as it is a standard program. But for subtype 2 i am using HR_INFOTYPE_OPERATION for updating the record which is ending with error, as employee which i am trying to update is already locked by me only through PA30. So this function module ends with Complex error. Please suggest how to update the infotype with subtype 2.
Thanking you..
Best regards
Akshay -
hi friends..
i m working in abap wit hr module..
i hav som basic doubts..
is it possible to create our own custom infotype ?
is it possible to delete the already created custom infotype?
plz can u tell me the ways to create and delete the custom infotype?
i want to create my own infotype.. how can i create ?Hi,
Please fallow the below steps to create the custom infotype. If you have any quires let me know.
For Creation of Infotype first Go to Transaction PM01, Enter the custom Infotype number which you want to create, it should be a 4 digit number and have to start with 9xxx.
then select the `Employee Infotype' radio button
after that select the `PS Structure Infotype'
then click on Create A separate table maintenance window appears
then Create a PS structure with all the fields you want on the infotype
Save and Activate the PS structure
now Go back to the initial screen of PM01
Click on `All' push button. It takes a few moments
Click on `Technical Characteristics. Infotype list screen appears
Click on `Change'(pencil) button
Now select your Infotype and click on `Detail' (magnifying glass) button
Give `T591A' as subtype table & also Give `T591S' as subtype txt tab
Give your subtype field as subtype field & Save and come back to PM01 initial screen
Click on `Infotype Characteristics' Infotype list screen appears
Click on `Change' (pencil) button & on New Entries
and then Enter your Infotype number and short text Here we have to set different Infotype Characteristics as per the requirement. (Better open another session with some standard Infotype's infotype characteristics screen and use as the reference
to fill yours). Now save ur entries
Now the Infotype is created and ready to use.
If you want to change the layout of the Infotype as per your
requirement
In the PM01 initial screen Select `Screen' radio button and give
2000 as the screen name, then click on edit.
In the next screen.. Select `Layout Editor' and click `Change'.
Screen default layout appears here you can design/modify the
screen..change the attributes of the fields..etc.
Save and activate. (Don't forget to `Activate at every level)
Thanks,
Reward If Helpful. -
Custom Infotype for eRecruiting
Dear Experts,
We need to create a custom infotype for eRecruiting.Need some pointers to the same.
PM01 is used for PA infotypes
PPCI for OM & PD.
How should we create custom infotype for eRecruiting which starts from 5102 onwards?
Please help asap.
Regards,
SowmyaHi,
Thanks a lot Divya.
We indeed created the infotype using PPCI.
For checking purpose we assigned it to a OM object & using Transaction PP01 entered a few records just to check if it is working.
But the real test would be if we can successfully bind it to the webdynpro ABAP screen.
Regards,
Sowmya -
Dear Colleagues,
Require to create Custom Infotypes for Joining , Separation & Back Graound check.
I understnad we can do it using T.Code PPCI.
However i am not able to do so as system is giving message to check for the Info type number.
Please guide how to go about it.
Note:- Development to be done without the help of ABAP consultant.
Regards,
GarimaHello Garima,
Transaction PPCI is for the creation of Personnel Development or Organizational Management Infotype
Transactino PM01 is for the creation/maintenant of Personnel Administration infotype.
I think you would be better to use PM01 ..
http://www.****************/Tutorials/HRABAP/Infotype/Create.htm
Check at the link above to know how to create a custom infotype from scratch
edit:
Remind that a Custom Infotype must have a numbe part of range 9000 till 9999 (other numbers are reserved for SAP)
Best regards
Hadrien -
Hi all,
My requirement is to Create Custom Infotyp 9100 with two new subtypes(9001 & 9002).
Subtype 9002 will pick up relationship data from the subtype of Infotype 0021
IT9801 u2013 Subtype 9001
PERNR EmpNo NUMC 8
ZISNo Serial No NUMC 4
VORNA First Name In Passport CHAR 25
NACHN Last Name In Passport CHAR 25
MIDNM Middle Name In Passport CHAR 40
IT9801 u2013 Subtype 9002
PERNR EmpNo NUMC 8
ZISNo Serial No NUMC 4
VORNA First Name In Passport CHAR 25
NACHN Last Name In Passport CHAR 25
MIDNM Middle Name In Passport CHAR 40
SUBTY Relationship Serial No CHAR 4
The field SUBTY should display as drop down by picking up the subtypes related to Infotype 0021 from the table T591A
Can you please provide ur inputs as this is very urjent requirement .Step by step procedure will be of great help.
Thanks in advance.Transaction to create an infotype is PM01. See online help there.
You have to create the PS structure first (SE11). This structure containms the fields, look at existing infotype for example.
hope it helps.
Maybe you are looking for
-
Safari quits unexpectedly everytime I try to click the safari icon. It doesn't even open up in the first place so I can't reset it. I'm currently in OS X Yosemite and I think the problem is that I recently visited Softonic and downloaded something fr
-
HT201077 Can more than one person upload photos to the shared Photo Stream?
Is there any way that more than one person can stream their photo on the same Photo Stream Album?
-
Checking header on each page for memo field
Hi, I have a report which has several details sections (4). In each detail section I have a title field and a content field. The content field is a memo fields and my problem is when the memo field goes on to another page it does not show the header.
-
Hi Abapers. I have a requirement where i have to enhance screen of fd32 I have checked RFDRRANZ user exit but its not serving the purpose.. can u pls tell me how can i customize the screen
-
Firefox crashes X randomly all the time
Firefox crashes X randomly, several times per day. Sometimes when open new tab, sometimes a second after closing firefox, sometimes just crash X without any reason. Xorg log: Backtrace: [ 13225.974] 0: /usr/bin/X (xorg_backtrace+0x26) [0x566c26] [ 13