ABAP HR How to create infotype with table control in it like Infotype 0008

Hi Experts.
I need help from u guys. My client requirement is to create custom infotype just like 0008 infotype which contain table control to save amount and wage types. I try to create infotype with table control using PM01, but that table control is in display mode only, i almost search every where to create custom infotype with table control but what ever threads in forum all are they unanswered and most of the threads for creating infotype. But i already done with infotype , but my main problem is table control.
If any one have some suggestion for this please share with me.
<removed by moderator> i am looking for positive reply.
Edited by: Thomas Zloch on Aug 30, 2011 12:54 PM

Hi
I've created several infotypes with a Table Control and it is always the same story. You have to create a custom Z table to store the Table Control data (if you can have unlimited records), so in the PSXXXX structure you need to add a TABNR field to link the PAXXXX table and the Z one, just like the type table OM infotypes.
Then in your code you have to control every possible operation, INS, MOD, DEL... and update the Z table accordingly (the standard code won't do that)
If your TC fields appear in display mode, take a look at the Groups 1 and 3 in your fields, the must be set with the usual values for a PA infotype.
If you have more questions, just ask,
Regards

Similar Messages

How to create bdc with table control

hi all.
please some body tell me how to create bdc with table control
or suggest any www with screen shots
thanks in advance ,
aparna

Hi AParna,
Its very Simple.
ALl you have to do is set up a counter based on the number of lines in the tabke. when the counter reaches the number of lines in the table hit the next page button which is at the top of every screen in SAP.
Please refer to the following BDC program I had developed using Table control,
this is for ME01 transaction.
LOOP AT T_EORD_HED.
    SELECT SINGLE * FROM MARA WHERE MATNR = T_EORD_HED-MATNR.
    IF SY-SUBRC = 0.
      PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0200'.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '/00'.
      PERFORM BDC_FIELD       USING 'EORD-MATNR'
                                    T_EORD_HED-MATNR.       "'58335'.
      PERFORM BDC_FIELD       USING 'EORD-WERKS'
                                    T_EORD_HED-WERKS.       "'0253'.
      L_COUNT = 1.
      LOOP AT T_EORD WHERE MATNR = T_EORD_HED-MATNR
                       AND WERKS = T_EORD_HED-WERKS.
        SELECT SINGLE * FROM LFA1 WHERE LIFNR = T_EORD-LIFNR.
        IF SY-SUBRC = 0.
* Look into the if condition below
          IF L_COUNT = 010.
            L_COUNT = 1.
            PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
            PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                  'EORD-MATNR'.
            PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                   '=NS'.
            L_COUNT = L_COUNT + 1.
          ENDIF.
          PERFORM BDC_DYNPRO      USING 'SAPLMEOR' '0205'.
          PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                        'EORD-AUTET(01)'.
          PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                        '/00'.
          CONCATENATE 'EORD-VDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE SY-DATUM TO T_EORD-VDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-VDATU.
          CONCATENATE 'EORD-BDATU' '(' L_COUNT ')' INTO OPR_FIELD.
          WRITE T_EORD-BDATU TO V_BDATU.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_BDATU.
          CONCATENATE 'EORD-LIFNR' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-LIFNR.
          CONCATENATE 'EORD-EKORG' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        '0001'.
          CONCATENATE 'EORD-RESWK' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-RESWK.
          WRITE T_EORD-MEINS TO V_MEINS.
          CONCATENATE 'EORD-MEINS' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        V_MEINS.
*          CONCATENATE 'EORD-EBELN' '(' L_COUNT ')' INTO OPR_FIELD.
*          PERFORM BDC_FIELD       USING 'OPR_FIELD'
*                                        T_EORD-EBELN.
          CONCATENATE 'EORD-EBELP' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-EBELP.
          IF T_EORD-FLIFN NE SPACE OR T_EORD-FRESW NE SPACE OR
             T_EORD-FEBEL NE SPACE.
            CONCATENATE 'RM06W-FESKZ' '(' L_COUNT ')' INTO OPR1_FIELD.
            PERFORM BDC_FIELD       USING OPR1_FIELD
                                          'X'.
          ENDIF.
          IF T_EORD-NOTKZ <> ''.
            CONCATENATE 'EORD-NOTKZ' '(' L_COUNT ')' INTO OPR_FIELD.
            PERFORM BDC_FIELD       USING OPR_FIELD
                                          'X'.
          ENDIF.
          CONCATENATE 'EORD-AUTET' '(' L_COUNT ')' INTO OPR_FIELD.
          PERFORM BDC_FIELD       USING OPR_FIELD
                                        T_EORD-AUTET.
          L_COUNT = L_COUNT + 1.
        ENDIF.
      ENDLOOP.
      PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                    'EORD-MATNR'.
      PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                    '=BU'.
      CALL TRANSACTION 'ME01' USING I_BDCDATA
                    MODE UP_MODE
*                     optIONS FROM l_opt
                    MESSAGES INTO I_BDCMSGCOLL.
      PERFORM FORMAT_OUTPUT.
    ENDIF.
ENDLOOP.

Screen with table control which works like SM30

Hello,
I have a screen with some parameters in order to obtain some records from
a custom table. In the same screen I must insert a table control which
shows the extracted records.
This table control has to work exactly like transaction SM30, that is the
user can modify, insert, delete or copy a record.
Does anybody know if exists a way (or method) to include this transaction
in the table control ? Or I have to use custom control to obtain this ?
N.B. the user wants a screen with parameter and table control (or custom control)
and not a call function to transaction sm30.
I thank you in advance.                      Paolo.

Hi Rob,
thanks for your interest; no it's not a reason of authorization, but simply
the user wants to modify a report that actually works with some parameters
at the top of the screen and a customer control which shows an Alv_grid
with the extracted record;
Now the user needs to modify this records (insert and delete) directly from
this list. So I don't know if there's a way to obtain this goal without replace
the custom control with a table control.
The screen look like this:
   Param.1 XXXXXXX
   Param.2 XXXXXXXXXXXX
Custom Contr. with ALV_grid (for extracted record)
                                                                         Regards.
                                                                         Paolo.

How to create infoset with tables of several system

Dear expert, I have the following requirement from the user.
I Need to create in SQ02 an infoset that put in join some table that are in different SAP system.
Some tables are in CRM, some other table in r/3.
Is there a way to do it ?
Thanks and regards
Davide Grosso

Davide,
Since the data exists in different systems - you cannot bring them together directly as a view - even if they are all SAP Systems.
If you still want to bring the data together - then you can use RFC Enabled function modules to read the base tables and try and put the data together... or bring the data in into separate tables into one single system and then create your view..
Edited by: Arun Varadarajan on Nov 3, 2011 9:41 AM

Create Roles with acess control in SAP MDM

Hi Experts,
I am new to SAP MDM.I want to know how to create roles with access control for various users in SAP MDM.
Thanks,
Manoj

hi,
in the console; you can create roles with access control and you can assign these roles to users.
follow this path:
Console --> repository --> Admin node --> roles,
here you can create new role. for role here you can maintain
1. role detail
2. Functions --here you can restrict the particular role , none / Execute the functions.
3. Tables/fields -- here you can give access to the role Read only / Read and write, and you can apply constraints also.
and follow the links:
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
hope this may help you,
Regards,
Srinivas

How to create database and table with GUI?

How to create database and table with GUI?
for linux can do that?
or have only way to create table by use sql*plus.
everyone please help me.
thanks

go to www.orasoft.org
here is a gui tool.
null

[b]How to create this Custom Table on Custom Schema with foreign key [/b]

This Custom Table is create in Custom Schema and Refers to Seeded Table in APPS schema
1 create table test_dff (test_id number(15) primary key,
2* invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE)
SQL> /
invoice_id number(15) constraint ap_test_fk REFERENCES ap_invoices_all(invoice_id) ON DELETE CASCADE
ERROR at line 2:
ORA-02270: no matching unique or primary key for this column-list
How to create this Custom Table on Custom Schema
thanks in advance

hi prashant
sorry for replying late, i have checked your query and it gives me no rows, but if i check for user_cons_columns it gives me no rows either in APPS Schema, but in AP schema it gives me
SQL> SELECT * FROM user_cons_columns WHERE table_name = 'AP_INVOICES_ALL';
OWNER CONSTRAINT_NAME TABLE_NAME
COLUMN_NAME
POSITION
AP SYS_C008177 AP_INVOICES_ALL
INVOICE_ID
SQL> SELECT constraint_name, constraint_type FROM user_constraints WHERE table_name = 'AP_INVOICES_A
LL';
CONSTRAINT_NAME C
SYS_C008177 C
SYS_C008178 C
SYS_C008179 C
SYS_C008180 C
SYS_C008181 C
SYS_C008182 C
SYS_C008183 C
SYS_C008184 C
SYS_C008185 C
SYS_C008187 C
SYS_C008189 C
SYS_C008191 C
and since this is a combination of Unique and Not Null Constraints , i am getting the same issue. do u have any solution to make the Detail table records to delete without using Alerts/DB Triggers?
thanks for your time .
abdul rahman

How to create variant for table/view ?

Hi,
When I go through SM30, I find a radio button called variant. I don't know the effect.
Can anyone tell me how to create variant for table / view ?
I want to know when we need to create variant for table/view.
Best regards,
Chris Gu

hi ,
Whenever you start a program in which selection screens are defined, the system displays a set of input fields for database-specific and program-specific selections. To select a certain set of data, you enter an appropriate range of values.
For further information about selection screens, refer to Selection Screens in the ABAP User's Guide.
If you often run the same program with the same set of selections (for example, to create a monthly statistical report), you can save the values in a selection set called a variant
Procedure
To create a new variant:
       1.      On the ABAP Editor initial screen, enter the name of the program for which you want to create a variant, select Variants, and choose Change.
       2.      On the variant maintenance initial screen, enter the name of the variant to be created.
Note the naming convention for variants (see below).
       3.      Choose Create.
If the program has more than one selection screen, a dialog box for screen assignment appears. The dialog box does not appear if the program only has one selection screen. The selection screen appears in this case.
       4.      If there is more than one selection screen, select the screens for which you want to create the variant
5.      Choose Continue.
The (first) selection screen for the report appears.
If your program has more than one selection screen, use the scroll buttons in the left-hand corner of the application toolbar to navigate between them and to fill the fields with values. If you keep scrolling forwards, the Continue button appears on the last selection screen.
       6.      Enter the desired selection values, including multiple selection and dynamic selection.
       7.      Choose Continue.

How to create the custom table?

Hi, how to create the custom table and how to integrate the table with defferent R/3?
my requiremnt is i have to create the two tables and those i have to integrate with the existed R/3 and using those R/3 i have to update my custom tables .....can give me some idea?
Tks
DPk

how to create the custom table
There are two approach in creating a table.
1. Bottom-up approach
2. Top-down approach.
Both are valid and you can choose which approach is suitable for you. I always use the bottom-up approach. Here are the steps to create the tables with this approach.
1. SE11 will take you to the DDIC and enter the name of the new table to be created. Let us say Zname. Click create.
2. Enter the short discription of the table and enter the field of the table. If it is primary key and you have to check the box.
3. Enter the data element and double click it, you will be asked to save and will take you to data element discription page. Enter the short discription of the data element and enter the information of domain like the length of field and type of field.
4. If you wanted to use the existing domain then its fine, or else, you have to create one. Enter the domain name in the data element page and double click it. Page will ask to save and jump to domain creation page.
5. In the domain page, you have to save the information which you have already given in the data elements page and check it. Before going to data element page, you have to activate the domain.
6. Go to data element page and save, check and activate.
7. Go to main table page and save, check, and activate.
8. Also, you have to save the technical settings of the table.
The table is now ready for operation. You can use it in your program or you can use it to enter information.
Check table: It is the table which will have all the information about the Foreign keys which are the primary keys in the check table.
It can be created by creating the foreign key from the main table. Click foreign key in the main table and it will take you to a page which will ask for table name and field to which foreign key relation has to be associated. Enter the information and you can create the check table automatically.
SM30 is used for maintenance of the table, that is to realease the errors occured during the creation of the table.
how to integrate the table with defferent R/3
Transport the Table to the another server/client/qas/prd
Kanagaraja L

How to Create Event polling table

hi,
1)How to Create Event polling table
2) wahts RPD stands for.
3) when we are prefer Dynamic variables.
thanks.
raj

1) http://obiee101.blogspot.com/2008/07/obiee-managing-cache-emptyingpurging.html
2) Repository Project Design ?
- More than likely the extension RPD was not used by anything else when Siebel Analytics first started using it, no doubt the 'RP' is repository, so use 'Definition' or 'Design' as you like. Im pretty sure there is nothing in the documentation but i've not checked, maybe you could check and let us know?
3) Dynamic variables would be something like 'CURRENT_MONTH' where the same query does not need to fire per user (ie SESSION variable) but needs to be periodically refreshed. Another use of you dynamic variable might be 'LAST_ETL_DATE' or somethng similar which might implement with your event polling table. By including the Variable within a Business Model, all cache for the Business Model is purged whenever the Variable's value changes.

How to create a temp table in the memory, not in disk?

in sql server, you can create a temp table in the memory instead of disk,
then you can do the insert, delete,update and select on it.
after finishing, just release it.
in Oracle,
I am wonderfing how to create a temp table in the memory, not in disk?
thanks,

Thanks for rectifying me Howard.
I just read your full article on this too and its very well explained here:
http://www.dizwell.com/prod/node/357
Few lines from your article
It is true, of course, that since Version 8.0 Oracle has provided the ability to create a Keep Pool in the Buffer Cache, which certainly sounds like it can do the job... especially since that word 'keep' is used again. But a keep pool is merely a segregated part of the buffer cache, into which you direct blocks from particular tables (by creating them, or altering them, with the BUFFER POOL KEEP clause). So you can tuck the blocks from such tables out of the way, into their own part of the buffer cache... but that is not the same thing as guaranteeing they'll stay there. If you over-populate the Keep Pool, then its LRU mechanism will kick in and age its contents out just as efficiently as an unsegregated buffer cache would.
Functionally, therefore, there can be no guarantees. The best you can do is create a sufficiently large Keep Pool, and then choose the tables that will use it with care such that they donâ€™t swamp themselves, and start causing each other to age out back to disk.
Thanks and Regards

HOW TO create a temp table or a record group at run time

i have a a tabular form and i dont want to allow the user entering duplicate
records while he is in insert mode and the inserted records are new and not exsisting in the database.
so i want to know how to create a temp table or a record group at run time to hold the inserted valuse and compare if they are exsiting in previous rows or no.
please help!

As was stated above, there are better ways to do it. But if you still wish to create a temporary block to hold the inserted records, then you can do this:
Create a non-database block with items that have the same data types as the database table. When the user creates a new record, insert the record in the non-database block. Then, before the commit, compare the records in the non-database block with those in the database block, one at a time, item by item. If the record is not a duplicate, copy the record to the database block. Commit the records, and delete the records in the non-database block.

How to create Matrix with Group report layout in xml

Hi,
i would be glad if anyone could tell me How to create Matrix with Group report layout in xml?
Here i am attaching the required design doc
below is the code
select COST_CMPNTCLS_CODE,
-- crd.RESOURCES,
NOMINAL_COST,
cmm.COST_MTHD_CODE,
-- crd.COST_TYPE_ID,
gps.period_code
-- ORGANIZATION_ID
from CM_RSRC_DTL crd,
gmf_period_statuses gps,
CM_MTHD_MST cmm,
CR_RSRC_MST crm,
CM_CMPT_MST ccm
where gps.period_id = crd.PERIOD_ID
and crd.cost_type_id = cmm.cost_type_id
and crd.RESOURCES = crm.RESOURCES
and crm.COST_CMPNTCLS_ID = ccm.COST_CMPNTCLS_ID
and gps.period_code in (:p_period1, :p_period2, :p_period3)
group by COST_CMPNTCLS_CODE, cmm.COST_MTHD_CODE, gps.period_code,NOMINAL_COST
order by 1,2,3,4.
The o/p of the report shoud be as given below
          Period-1     Period-2     Period-3     Period-4
COMPONENT
LABOUR - DIRECT
     Actual     1     2     3     4
     Actual Rate     10     10     10     10
     Standard Rate
     Var%
DEPRICIATION-DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
OVERHEAD - DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
LABOUR - IN DIRECT
     Actual
     Actual Rate
     Standard Rate
     Var%
Thanks in advance

Your friend is obviously not a reliable source of HTML
information.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Mr.Ghost" <[email protected]> wrote in
message
news:f060vi$npp$[email protected]..
> One of my friends advised me to develop my whole site on
the layout mode
> as its
> better than the standard as he says
> but I couldnot make an ordinary table with rows and
columns in th layout
> mode
> is there any one who can tell me how to?
> thanx alot
>

How to create a booking table (make online reservation)

Hi everyone,
I'm just wondering if any of you know how to create a booking
table, like a booking seat for an airplane... I have to do the
booking table as I'm doing a Japanese Restaurant website for my
project.. At the moment, I'm using PHP, MySQL and HTML..
Could anyone help me, please?
Cheers,
Nova

You first need to check with your host to see which type of
server side
scripting language they support. If they support PHP, try,
http://www.jellyform.com/
Shane H
[email protected]
http://www.avenuedesigners.com
=============================================
Blog:
http://avenuedesigners.com/blog/
Web dev articles, photography, and more:
http://sourtea.com
=============================================
Proud GAWDS member
http://www.gawds.org/showmember.php?memberid=1495
Delivering accessible websites to all ...
=============================================
"mastacraft" <[email protected]> wrote in
message
news:f3pote$d16$[email protected]..
> Hello,
>
> I need to create a booking form for a website- So wen
they fill out form
> for
> bookings. Should have tab for club appearance. Magazine
ads. Etc It needs
> to
> lead to this email : [email protected]
>
> I'm really not sure how the best way is to do this, i
understand it's
> probably
> a really simple process.
>
> Regards,
>

How to create CATALOG with MS SQL Server?

Connection class has getCatalog(strCatalog) method. In order to use it, we must create CATALOG in Database?
How to create CATALOG with MS SQL Server?
Help me, please!!!

You do not create these for any database, this is part of the Connection metadata.
The Catalog is the third level of table-like database object qualification as in "Catalog.Schema.Table". For SQLServer the qualification scheme is "Database.Owner.Table" and I would be surprised if they reported anything for the current connections getCatalog() method call.
What many people do is avoid table qualification altogether by setting the connection's context in a database proprietary manner and then keeping the SQL as clean as possible. For many ODBC and JDBC drivers this can be set in the configuration. For MS SQLServer you can also execute a "USE dbname" statement on the connection to avoid table qualification.

ABAP HR How to create infotype with table control in it like Infotype 0008

Similar Messages

Maybe you are looking for