ABAP-HR OUTBOUND INTERFACE

HELLO EXPERTS,
Plz provide me with any sample code for outbound interfaces in abap-hr as i'm new to this concept.
Thanks,
Naveen Sharma

Dear Naveen,
would you mind checking this site? Perhaps you find some useful information.
<a href="http://erpgenie.com/abaptips/content/view/302/62/">ABAP Inbound/Outbound interfaces iDoc - User Exits</a>
Kind regards,
Zsolt

Similar Messages

Need sample programs for inbound & outbound interfaces in abap hr?

hi friends
i need sample programs for inbound & outbound interface programs in hr abap . any one send me pls
thanks & regards
deepurd

&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Report ZPROG65_11 *
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
REPORT zprog65_11 .
TABLES : lfa1.
TYPES : BEGIN OF ven ,
lifnr LIKE rf02k-lifnr,
bukrs LIKE rf02k-bukrs ,
ekorg LIKE rf02k-ekorg,
ktokk LIKE rf02k-ktokk,
name1 LIKE lfa1-name1,
sortl LIKE lfa1-sortl,
land1 LIKE lfa1-land1,
spars LIKE lfa1-spras,
akont LIKE lfb1-akont,
fdgrv LIKE lfb1-fdgrv,
waers LIKE lfm1-waers,
anred LIKE lfa1-anred ,
END OF ven .
DATA : t_ven TYPE TABLE OF ven WITH HEADER LINE ,
t_bdc LIKE TABLE OF bdcdata WITH HEADER LINE .
DATA : v_file TYPE string ,
v_temp TYPE i ,
v_lifnr(10) TYPE n,
v_hdate LIKE sy-datum.
DATA : c_tcode LIKE sy-tcode .u201Dvalue u2018XK01u2032.
PARAMETERS : p_file(30) DEFAULT u2018c:\vendor1_11.txtu2019,
p_group LIKE apqi-groupid.
START-OF-SELECTION .
MOVE p_file TO v_file .
PERFORM file_upload TABLES t_ven USING v_file .
v_hdate = sy-datum - 1.
CALL FUNCTION u2018BDC_OPEN_GROUPu2019
EXPORTING
client = sy-mandt
DEST = FILLER8
group = p_group
holddate = v_hdate
keep = u2018Xu2019
user = sy-uname
IMPORTING
QID =
EXCEPTIONS
client_invalid = 1
destination_invalid = 2
group_invalid = 3
OTHERS = 11
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT t_ven .
clear lfa1.
v_temp = 0.
MOVE t_ven-lifnr TO v_lifnr.
SELECT SINGLE * FROM lfa1 INTO lfa1 WHERE lifnr =
v_lifnr.
IF sy-subrc = 0.
WRITE :/ u2018foundu2019.
v_temp = 1.
else.
write: / u2018not foundu2019.
ENDIF.
IF v_temp = 0.
c_tcode = u2018xk01u2032.
PERFORM fill_ddc_table .
ELSEIF v_temp = 1.
c_tcode = u2018xk02u2032.
PERFORM fill_bdc_table .
ENDIF.
CALL FUNCTION u2018BDC_INSERTu2019
EXPORTING
tcode = c_tcode
TABLES
dynprotab = t_bdc
EXCEPTIONS
internal_error = 1
OTHERS = 7.
REFRESH t_bdc .
ENDLOOP .
CALL FUNCTION u2018BDC_CLOSE_GROUPu2019
EXCEPTIONS
not_open = 1
queue_error = 2
OTHERS = 3.
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Form file_upload
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
u2013>P_T_VEN text
u2013>P_V_FILE text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
FORM file_upload TABLES p_tven STRUCTURE t_ven
USING p_vfile.
CALL FUNCTION u2018GUI_UPLOADu2019
EXPORTING
filename = p_vfile
filetype = u2018ASCu2019
has_field_separator = u2018Xu2019
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = p_tven
EXCEPTIONS
file_open_error = 1
file_read_error = 2
OTHERS = 17
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. u201D file_upload
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Form FILL_DDC_TABLE
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
u2013> p1 text
<u2013 p2 text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
FORM fill_ddc_table .
SCREN 100
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180100u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-LIFNRu2019.
t_bdc-fval = t_ven-lifnr .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-BUKRSu2019.
t_bdc-fval = t_ven-bukrs.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-EKORGu2019.
t_bdc-fval = t_ven-ekorg.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-KTOKKu2019.
t_bdc-fval = t_ven-ktokk.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
110
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180110u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-NAME1u2032.
t_bdc-fval = t_ven-name1 .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SORTLu2019.
t_bdc-fval = t_ven-sortl.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-LAND1u2032.
t_bdc-fval = t_ven-land1.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SPRASu2019.
t_bdc-fval = t_ven-spars.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
120
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180120u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
130
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180130u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018=ENTRu2019.
APPEND t_bdc. CLEAR t_bdc.
210
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180210u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFB1-AKONTu2019.
t_bdc-fval = t_ven-akont .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFB1-FDGRVu2019.
t_bdc-fval = t_ven-fdgrv.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
215
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180215u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
220
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180220u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
310
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180310u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFM1-WAERSu2019.
t_bdc-fval = t_ven-waers .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
320
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180320u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018=UPDAu2019.
APPEND t_bdc. CLEAR t_bdc.
ENDFORM. u201CFILL_DDC_TABLE
u201D FILL_DDC_TABLE
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
*& Form FILL_BDC_TABLE
&u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014
text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
u2013> p1 text
<u2013 p2 text
u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014u2014-
FORM fill_bdc_table .
SCREN 101
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180101u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-LIFNRu2019.
t_bdc-fval = t_ven-lifnr .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-BUKRSu2019.
t_bdc-fval = t_ven-bukrs.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018RF02K-EKORGu2019.
t_bdc-fval = t_ven-ekorg.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
110
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180110u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018lfa1-anredu2019.
t_bdc-fval = t_ven-anred .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-NAME1u2032.
t_bdc-fval = t_ven-name1 .
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SORTLu2019.
t_bdc-fval = t_ven-sortl.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-LAND1u2032.
t_bdc-fval = t_ven-land1.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018LFA1-SPRASu2019.
t_bdc-fval = t_ven-spars.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018/00u2032.
APPEND t_bdc. CLEAR t_bdc.
300
t_bdc-program = u2018SAPMF02Ku2019.
t_bdc-dynpro = u20180300u2032.
t_bdc-dynbegin = u2018Xu2019.
APPEND t_bdc. CLEAR t_bdc.
t_bdc-fnam = u2018BDC_OKCODEu2019.
t_bdc-fval = u2018=YESu2019.
APPEND t_bdc. CLEAR t_bdc.
ENDFORM. u201D FILL_BDC_TABLE
Best Regards

Regarding Inbound and outbound interfaces in ABAP HR

Hi,
Iam new to SAP. Can you send the document related to Inbound and Outbound Interfaces in detail.
i.e What these interfaces comes under and steps to develop these inerfaces.
Thanks&Regards,
B.Thulasi.

Hi,
Iam new to SAP. Can you send the document related to Inbound and Outbound Interfaces in detail.
i.e What these interfaces comes under and steps to develop these inerfaces.
Thanks&Regards,
B.Thulasi.

Creation of one outbound interface for two diferent senders

helo.
i just want to conform ont thing that .
my scenario is two diferent files from 2 diferent business systems are sending to one Rfc.
so i was created only one outbound interface for both senders and one message type bcos the file structure is same for both senders.
so is there any thing wrong in creating only one datatype,message type,message interface for both senders.
waiting for your response.
cheers.
seeta ram.

Hi Ram,
That is perfectly correct when you have two senders and one receiver Scenario and Business Service is different. Then you can use the same Interface.
Just keep in mind that the key for XI to recognise the Right interface is combination of these 3 parameters:
Sender Service, Sender Interface and Namespace. These cannot be duplicated.
When the Message type is same in the sender input data then you can create just one Message Type and One Data type and RFC is anyhow the imported RFC which you need not have to worry.
In Configuration Scenario you need to configure separately the RD, ID, CC and Agreements for the Interfaces.
Hope this answers your query. Let us know if you need anymore clarification
Thanks
Srini

In PI 7.1, condition editor does not show the outbound interface structure

Hello,
I am using PI 7.1, I need to use condition whild determing receivers. So I opened the condition editor, then open the expression editor, select XPath instead of Context object. I would expect that the outbound interface structure appears in the box underneath the XPath, so that I can navigate the structure to choose the field I want to use. However nothing appears here. Do you knwo why is that? Or do I need to do anything to bring up the outbound interface structure in the expression editor?
Thanks
Jayson

Hi Jayson,
I had the same problem
the use of context objects and the value help for xpath is available for XI3.0 interfaces in PI 7.10 only. The functionality for "new" interfaces has been implemented in 7.11 only.
you have to use xpath w/o value help.
I have created a context object in one of our 7.10 test systems, and indeed I was unable to use it in a receiver determination unless the service interface pattern is "Stateles (XI 3.0 compatible)". If you were to change the service interface to that pattern, you have to change the operation name unless it is already identical to the interface name. So that may not be an option for you.
It was possible to use the context object in a receiver rule but then I could not activate the receiver determination because the software component version was supposedly unknown. I will check with my PI contacts - please let me know if the change to "XI 3.0" interface would be a possible workaround for you.
Try the steps which I am giving below, although it's a workaround and don't know the exact reason why it is failing.
1. Open your Outbound Message Interface (which you are using in your Receiver Determination) in IR, edit it and change the Interface pattern (which is there just below the category "Outbound") to "Stateless (XI30 - Compatible)" , save it activate it.
2. Follow the same step for your Inbound Message Interface. Change the Interface Pattern from "Sateless" to "Stateless (XI30 - Compatible)" .
3. Go to ID. Remove your Outbound and Inbound Message Interface from their respective Business Service/Comp and add it again.
4. Create your your receiver determination again using the Outbound and Inbound MI you have changed.
5. Open condition editor of your receiver determination.You should be able to see your Message Interface and can choose the XPath.
Thanks,
Raj
Edited by: raj reddy on Jan 21, 2009 5:41 PM

Outbound interface determination in file adapter?

In my scenario files with different schemas can be send to XI from the same directory using the file adapter (so each file has a different interface that must be mapped etc.).
I cannot add multiple interfaces to the file adapter in sender agreement and determine the outbound interface by some condition. Interface must not be "*".
I thought about creating multiple file adapters (all listening to the same directory) and sender agreements. Each adapter is listenig to specific file type only (e.g. *.yxz, *.abc). So before putting the files to the input directory the file extension must be changed so that only the right adapter reads the file and XI gets the right interface.
Is there abetter way to do this???

These blogs will be usefull i guess..
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi
/people/ravikumar.allampallam/blog/2005/02/17/bridging-the-sync-async-bridge-with-fork-xi
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/daniel.graversen/blog/2006/09/07/using-a-bpm-to-collect-messages-for-a-set-interval-of-time
Reward points if usefull........

Interface Type "ABAP Dictionary-Based Interface" not generating Interac

Hi All,
I am getting problem in ABAP Adobe interactive forms in ECC6.
I tried designing Adobe interactive form by 2 following ways:
1) in SFP -->> Interface Type -->"ABAP Dictionary-Based Interface"
2) in SFP -->> Interface Type -->"XML Schema-Based Interface"
When I designed with 1st way I am not getting Interactive form, I get only read
only form when executing ABAP webdynpro application.
But same form giving interactive form when calling ABAP program.
But when I designed with 2nd(XML) way I am getting Interactive form. In Webdynpro application.
In both case i have kept view property as enabled.
Please guide me, Is there any step which is mandatory for Adobe interactive forms when
we use (SFP -->> Interface Type -->"ABAP Dictionary-Based Interface"), with ABAP webdynpro application.
Thanks

XML Schema-Based Interface

Outbound interface file for the employeesu0092 deduction information from the d

How to Create an Outbound interface file for the employees deduction information from the different Payroll Companies.
Thanks in advance.
Regards
vamsi.

Hi,
The requirement seems to be similar to the one posted in the link https://forums.oracle.com/thread/848476. Please check.

Outbound interface using dataset

Hi,
     Please send me example program for outbound interface to maintain file in application server.
Thanks
Ali

Hi,
the code should look like below.
declare:
filepath_name TYPE rlgrap-filename,
internal table itab.
**Populate data to itab.
OPEN DATASET filepath_name FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc = 0.
        LOOP AT itab.
          TRANSFER itab TO filepath_name .
        ENDLOOP.
      ELSE.
        MESSAGE i001(00) WITH 'Error writing to file in remote computer'.
      ENDIF.
      CLOSE DATASET filepath_name .

Outbound interface program for downl;oading text file

Hi,
I m working with outbound interface program which downloads text file into application and presentation server upon the selection.
My probelm is
The data format in the text file
Whenever interface sends 1 record to the text file and next record should start continuation to the first record with
seperator like some synbol.
Please tel me posr the sent for this

Hi,
I m working with outbound interface program which downloads text file into application and presentation server upon the selection.
My probelm is
The data format in the text file
Whenever interface sends 1 record to the text file and next record should start continuation to the first record with
seperator like some synbol.
Please tel me posr the sent for this

Problem with Outbound Interface for Party in Standard XI Content for SNC

Hi All,
I am configuring a standard XI Content for SNC, the ASN Processing (DIMP ERP Backend). The provided Integration scenario involves three swim lanes which corresponds to an ERP, SCM and an external system. The external system is as an application component that is designed for B2B communication, i.e. a service with party which is called Supplier.
The first action within the scenario is Create ASN in the Supplier swim lane and send a message to the action "Receive ASN and update inventory(in transit)" within the SCM system swim lane. I have created a sender party that corresponds to the Supplier swim lane and also a receiver party that corresponds to the SCM system. I used the Integration Scenario Configurator to assign services and also all the comm. channel. However, when i try to generate the logical routing objects and collaboration agreements, i get the error message that there was no outbound interface associated with the sender(the external system) defined for the first action. There is no option within the Integration Scenario Configurator on how to assign/define the outbound interface that I want to use for the sender.
I have no idea how to assign the outbound interface to the action for the Supplier swim lane in an Integration Scenario that is from an XI Content. Has anybody configured something similar or come across the same problem? Any info will be much appreciated.
Luqman

Hi,
This could be the problem of confilting namespace or combinations.
in receive action just check that right message interface is configured at Inbound side.
just check any place void ?
1)just check the name as case sensitive.
2)Just check is there interface belongs to right software component.
3)Just check mapping assigned to the right combination or not.
its better to cross check all the component are assigned to right place or not.
****if helpful then rewards points
Regards,
Sumit Gupta

More than one outbound interface for the webservice scenario

Hi Experts,
Is it possible to have more than one outbound interface for the Webservice synchronous scenario? I have tried it , but I couldn't implement it.
I would like to have your suggestions.
Regards
Sara

Hey,
Creation of a wsdl file
/people/riyaz.sayyad/blog/2006/05/07/consuming-xi-web-services-using-web-dynpro-150-part-i
N:1 seemz he was refering to multimapping scenario.
Cheers,
*RAJ*
*REWARD POINTS IF FOUND USEFULL*

BPM with 2 JDBC outbound interfaces and one inbound file interface

Hi,
I have a scenario where data is coming from different databases into XI and after processing the data it creates a file at the target side. Some calculations are to be done in the middleware and the result will be sent through a file.
My question is
1. BPM will be used in this scenario?
2. There will 2 outbound interfaces(one for each database access), 2 abstract interfaces and one inbound interface(file). Please correct me if I am wrong.
3. I have to multiply the value of field from one database to a particular value in another database and get the final result. For e.g exchange rate from one database is multiplied to Transaction currency in another database and get the group currency value in the output. Can anyone give the sequence of steps in the intergration process for this scenario as I am new to BPM.
Thanks,
Aparna

Thanks a lot Liang and madhusudana for your responses.
Since I can use JDBC lookup for this in my nornal scenario I think no need for BPM.
I have created the advanced UDF for JDBC lookup code. Below is the code.
String Query = " ";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
MappingTrace importanttrace;
importanttrace = container.getTrace();
// Build the Query String
Query = "Select home_cur_code FROM gltrxcp WHERE company_code = '" + a[0] + "' ";
try{
//Determine a channel, as created in the Configuration
channel = LookupService.getChannel("BS_JDBC_send","cc_JDBClookup_rec");
//Get a system accessor for the channel. As the call is being made to an DB, an DatabaseAccessor is obtained.
accessor = LookupService.getDataBaseAccessor(channel);
//Execute Query and get the values in resultset
resultSet = accessor.execute(Query);
importanttrace.addWarning("resultset" + resultSet );
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("HOME_CUR_CODE"));
importanttrace.addWarning("result" + result );
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!=null) accessor.close();
catch(Exception e){
result.addValue(e.getMessage());
But I am not getting the desired result. I am getting result as 'Null'.
Can you please help in resolving this issue. I have also used trace for find out where it is passing Null and found that 'result' is coming null. Do i also need to parse it before passing it to 'result'?
Can anyone send sample code for JDBC lookup.

Web Service u0096 ABAP proxy synchronous interface

hi experts,
can you suggest me how to do this scenario?
Web Service ABAP proxy synchronous interface.

hi,
you can create a web service on XI
which will call ABAP proxy (on ERP, SRM etc)
in a synchronous way (you just need to generate the proxy class
in TCODE SPROXY)
then you can fill the method of your generated proxy class
and you will have WS - ABAP proxy interface
have a look at this to undrstand server proxy:
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Driver program for outbound interfaces

hi
i am having 5 outbound interfaces for which i need to make a driver program
in my driver pgm i need to make a selection screen which consists of 2 radio buttons
1 . presentation server
2. application server
when we select presentation server all the 5 inerfaces prestation server down load path must execute at a time .
in the same way if we select application server all 5 interfaces application servers must execute
can any one help with sample code
urgent
regards
sachin

Hi sachin,
can you explain a little more about ur req, like what do you mean by "down load path must execute at a time"
Regards
Raj

ABAP-HR OUTBOUND INTERFACE

Similar Messages

Maybe you are looking for