ABAP HR-test scenario for payslip-urgent

Hi,
please send me some test scenarios for payslip by which payslip can be affected.
I have designed a PAyslip with retro and i want to test it.
eg. retro. means if retro will run then it will affect payslip.
Also send me some unit test cases in case of any payslip requirement.
Points will be rewarded.
Regards
Monika

Hi,
Just give an entry in infotype 8, 14 or 15 for previous month and run the payroll than retro will run, than compare results using wage type reporter.
When you run the payroll give the sandard SAP Remuneration and compare the results in the SAP payslip and payslip you have developed.
If you have developed payslip using PE51 than the retro amounts are picked authomatically.
Regards,
Ramu N.

Similar Messages

Test scenario for payslip testing

Hi,
please send me some test scenarios for payslip by which payslip can be affected.
eg. retro. means if retro will run then it will affect payslip.
Also send me some unit test cases in case of any payslip requirement.
Regards

Hi,
Just give an entry in infotype 8, 14 or 15 for previous month and run the payroll than retro will run, than compare results using wage type reporter.
When you run the payroll give the sandard SAP Remuneration and compare the results in the SAP payslip and payslip you have developed.
If you have developed payslip using PE51 than the retro amounts are picked authomatically.
Regards,
Ramu N.

Test scenario for Physical Standby

Dear Team,
Could you please share the Test scenario for Physical Standby.
1. Read only.
2. Switch Over
3. Fail Over.
Many Thanks in Advance
Arjun.

You didnt mention the version.
Oracle10g Release 2, Data Guard Switchover and Failover best practices
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_SwitchoverFailoverBestPractices.pdfOracle9i, Data Guard Switchover & Failover best practices
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_9iSwitchoveFailoverBestPractices.pdfKhurram

How to create a test scenario for Extended receiver agreement

HI, experts,
I tried to create a test scenario in PI7.1 / Intergration Builder, I already defined 3Operation mapping and 3Message mapping in Enterprise Builder and test good.
1 Operation mapping is reading input, and output in "ReveiverDetermine" structure.
other 2 mappings are real mapping program.
My question is how to create test scenario for it? I know I should create a "Receiver Determine" with "Extended" option, however can anybody point out a good guide with details?
thanks!

Hi,
>>Hence I created 2 MM/OM and one OM/MM (OM3) which uses ReceiverDetermine structure as the target.
You need to create only one OM (add one source interface and two target interface in this) and in that use one MM (add source MT and add the 2 receiver MT in the signature tab of the MM )
>>One bussiness component
One BC for Source and One for target
>>One Receiver Determine (set extended option and select the OM 3 ?)
Yes
>>One sender aggrement
Yes
>>Two or Tree Receiver aggrement
Two Receiver Agreement
Also check this wiki page for step-by-step guiide
https://wiki.sdn.sap.com/wiki/display/SI/StepbyStepguidetoExplainEnhancedReceiver+Determination
Regards
Suraj

Idoc test scenario for MM invoice verification

Dear Experts,
I am doing a scenario for testing the inbound process for Invoice ( MM ).
If any body has done this test idoc prcoessing for the scenario, i need your valuable help in how to go about this.
In simple, how to do the WE19 for MM invoice verification.
Regards
RAj

hi,
Pls check this link,Hope it helps
Test IDOC inbound processing in WE19
No status record was passed to ALE (Working fine in WE19)
thanks.

How to create test scenario for KIT Item?

Hi All,
I want to test how KIT Functionality works in OM. I have tried looking into User Guides / Web but I am not able to get specific functionality related to KIT Item testing in OM.
If anyone has idea of how KIT item works and what are the setups required to perform in the system related to KIT, which Transaction Type we need to use, etc. it will be great.

Vishal,
I'm not sure if you're familiar with the CTO processes in Oracle (if not check out the CTO user guide/manual), but kits work very similarly in that they have a bill of material structure and the components are optionally exploded to the sales order pad on saving/booking (depending on the setting of the profile option OM: Included Item Freeze Method).
Each line has its own workflow in OM - again, in the same way as a configuration does except that in the case of a kit all of the components are required.
I've sent you a sample test script to your email address.
Regards,
Jon

Hi Experts, need an example for abap unit test(ABAP OO)?

Hi Experts,
I want to do abap unit test for the developed programs, could anyone please give me an example program of development(a simple is ok, just use it to test)? and an abap unit test example for the program, what I want is to use object oriented abap, thanks in advance!
Merry Christmas to you all.
Kind regards
Dawson

Hi
Below documents will give you more information,
http://help.sap.com/saphelp_nw04/helpdata/en/a2/8a1b602e858645b8aac1559b638ea4/content.htm
ABAP Testing and Troubleshooting [original link is broken]
http://bi.offis.de/publicProject/g16cglafhqva.htm
regards
Nagaraju

Test Scripts for financials modules

Hi,
I am looking for detailed test scripts covering all test scenarios for system testing in financials modules. I am interested in Purchasing, Payables, Cash Management, Projects and Fixed Assets. I also need for Receivables and Order Management.
Do some body have this please let me know. If there is any website or download place where I can get this. Please let me know.
I am looking for a test script to show the purpose and results clearly including the gl accounts involved and the results in debiting and crediting the accounts in various transactions while doing the test. For ex. when you validate a PO matched invoice in Payables which accounts get affected and how etc.
Thanks in advance
Regards,

Pl do a search for "financials test scripts" in the forum search - this has been discussed and responded to many times before :-)
HTH
Srini

Idoc-XI-file test scenario

i m new to XI,
i wanna make a test scenario for idoc-XI-file...
i donno what an idoc is.......
tell me how to create an idoc from the very basics....like message type, segment, partner profile, port creation, etc,..... and how to fire an idoc from the R3 system to my XI system,
and ofcourse... ican do the rest of mapping and all, with the file message type

Hi Sudeep,
1. steps for creating customized Idocs..
we31- creation of Segments
we30- creation idoc types
we81- creation of Message types
we82- assigning message type to Idoc type...
2. R/3 Configuration settings
SM59 - creation of RFC destination...
we20 - creation of Ports
We21 - Creation of Partner profiles..
3. XI Configuration settings
SM59 - Maintain RFC destination,
IDX1 - Maintaining port for XI
IDx2 - Loading the Idocstructure into metadata repository
These are the settings to be done before starting ur scenario..
I think this will help you... points...
regds,
vasanth.

Tax code - test scenario

I have recently updated an internal tax table applied to stock options for employees. Can someone please guide me on how I will do a test scenario for this?

The Input and Output Tax has to be specified in FTXP, then go to T.code: OBCL then allocate the Input and output tax code to the company code and save.

Need training material / test scripts for MRP and Supply Chain module. Can anyone hel

Can anyone out there provide me with sample test scripts they may have used for upgrading to Oracle Financials 11i? Need sample scripts for MRP and Supply Chain management. Looking for good test scenarios for testing these modules. Appreciate any help. Email at [email protected]

Can anyone out there provide me with sample test scripts they may have used for upgrading to Oracle 11i? Need sample scripts for MRP and Supply Chain management. Looking for good test scenarios for testing these modules. Appreciate any help. Email at [email protected]

How to count the number of test ABAP Unit test methods

I need to count the number of test methods of a class.   Has anybody done this before?   For example, if I have a class that has 3 methods and I wrote 6 abap unit test methods for it.   I can count the number of methods using cl_abap_classdescr=>describe_by_name (which gave me 3 from my example) but I could not find the function module to count the number of test methods (which should give me 6 in my example).
I appreciate your reply.

This call does thew trick. I just had to make sure the prog name that I pass has "CP" from the 30th pos for it return the result.   Here is thew subroutine that I use:
form get_test_method_count using     query_class
                           changing test_method_count.
data: l_progname type progname.
l_progname = query_class.
l_progname+30 = 'CP'. "needed so the following method will recognize this as a class
data: l_result type if_aunit_prog_info_types=>ty_t_testclasses.
try.
      call method cl_aunit_prog_info=>get_tests_of_program
        exporting
          progname = l_progname
        receiving
          result   = l_result.
      if l_result is not initial.
        data: result_rec like line of l_result.
        loop at l_result into result_rec.
          test_method_count = lines( result_rec-methods ).
        endloop.
      endif.
    catch cx_root.
endtry.
endform.

CRM extractor Testing Scenarios.

Hi Gurus,
I need to extract the Activities from CRM to BW. This data must be extracted with the standard extractor
0CRM_SALES_ACT_1
0crm_srv_process_h
0CRM_ERMS_ITEMS. When I test this extractor in RSA3 (in CRM), I obtain records that is less than "Activity Monitor" (CRM SIDE) . I checked in tables in CRM end and those tables have more than RSA3 extractor data.
**How can help me out in giving the testing scenarios for the above extractor to be testing compelted E2E and kindly provide me with steps how to check if CRM data fully extracted into BW? or not ?**
Thanks
Naren

Hi,
CRM to BW extraction
also pls check BI Best Practice ?
http://help.sap.com/bp_biv335/BI_EN/html/bw.htm
'Customer Relationship Management'
e.g
http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
Have a look at these linsk from help.sap
http://help.sap.com/bp_biv135/html/bw.htm
http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
It might help u.....

Controlling Test Scenarios

Hi All,
Is there a list of recommened Test Scenarios for Controlling module. Can someone pls share the test scenarios for Controlling module.
Thanks in Advance,
Safi

Hi,
Please go through the attached URL , It help you to understand the PM business process and executing cycle in SAP
[http://help.sap.com/saphelp_46c/helpdata/en/fe/67f9609d6f11d189b60000e829fbbd/frameset.htm]
Sanjay

Document for test scenarios in Construction

Hi
Does anyone has documents with test scenarios(steps) in SAP SD for Construction business.
Please mail the same to my mail id, Urgent help needed
Regards
Hitesh

Hello!
Did you check at the Best Practices website?
You can find some scenarios steps in the document "Business Process Documentation": http://help.sap.com/bp_eco604/BBLibrary/Documentation/447_BPP_EN_US.doc
http://help.sap.com/bp_eco604/BBLibrary/HTML/447_EN_US.HTM
The link to the Construction Best Practices is http://help.sap.com/bp_eco604/ECO_US/HTML/index.htm
I hope this helps.
Regards,
Rafael

ABAP HR-test scenario for payslip-urgent

Similar Messages

Maybe you are looking for