ABAP Import Error on Solution Manager Installation
Dear Guru's,
I'm installing solution manager 7.0 SR4 on AIX 5.3 with DB2 9.5, in the ABAP Import phase its throwing error message.
Error Message
WARNING 2010-04-27 11:29:41.914
Execution of the command "/usr/sap/SM1/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SM1/SYS/exe/run/R3load: START OF LOG: 20100427112940
WARNING[E] 2010-04-27 11:29:41.917
CJS-30023 Process call '/usr/sap/SM1/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SM1' as 'sapsm1' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR 2010-04-27 11:29:42.429
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
Kindly suggest me a solution for the above issue.
regards,
Guna
Hi,
As per your request, trans.log has been pasted below,
detecting the error: "connect". Protocol specific error code(s): "79", "*",
4 ETW000 35 0.064772
4 ETW000 [dev trc ,00000] &+ "*". SQLSTATE=08001
4 ETW000 35 0.064807
4 ETW000 [dev trc ,00000] &+
4 ETW000 36 0.064843
4 ETW000 [dev trc ,00000] &+
4 ETW000 36 0.064879
4 ETW000 [dev trc ,00000] &+
4 ETW000 35 0.064914
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1634] (END) 29 0.064943
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'SM1' as 'sapsm1' failed
4 ETW000 4444 0.069387
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'SM1'"
regards,
Guna
Similar Messages
-
Error during Solution Manager Installation
I'm trying to install Solution Manager on a Windows 2003 and MS SQL 2005 database and keep receiving the following error:
WARNING[E] 2008-10-10 16:56:18.643
CJS-30149 ABAP processes of instance SOL/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:30 minutes. Giving up.
ERROR 2008-10-10 16:56:19.222
FCO-00011 The step start with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start was executed with status ERROR .
Can anyone help?Hi Markus,
I am getting the same erros during installation BI7.
the server already running one BI7 instance on it as development serevr.
& same server we are using for the PRD instance. which giving the error for the Phase 27 - start Instance.
Installation for dev server we configured Local SLD. & for
PRD used to register in exisitance SLD in which I use the HTTP Port 50000 may be it was the problem deu to this if the Port is wrong.
see the trace file.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 05
sid BIP
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 144
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 7968
Sat Oct 25 11:50:40 2008
kernel runs with dp version 232000(ext=109000) (@(#) DPLIB-INT-VERSION-232000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (05 7968) [dpxxdisp.c 1243]
shared lib "dw_xml.dll" version 144 successfully loaded
shared lib "dw_xtc.dll" version 144 successfully loaded
shared lib "dw_stl.dll" version 144 successfully loaded
shared lib "dw_gui.dll" version 144 successfully loaded
shared lib "dw_mdm.dll" version 144 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3905
Sat Oct 25 11:50:51 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0134.qqq.nxst) took 11 seconds
Sat Oct 25 11:51:07 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 16 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >abgsapbi_BIP_05 <
DpShMCreate: sizeof(wp_adm) 25168 (1480)
DpShMCreate: sizeof(tm_adm) 5652128 (28120)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000EE70050, size: 6348592)
DpShMCreate: allocated sys_adm at 000000000EE70050
DpShMCreate: allocated wp_adm at 000000000EE72150
DpShMCreate: allocated tm_adm_list at 000000000EE783A0
DpShMCreate: allocated tm_adm at 000000000EE78400
DpShMCreate: allocated wp_ca_adm at 000000000F3DC2A0
DpShMCreate: allocated appc_ca_adm at 000000000F3E2060
DpShMCreate: allocated comm_adm at 000000000F3E3FA0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000F46AC30
DpShMCreate: allocated gw_adm at 000000000F46ACB0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000F46ACE0
DpShMCreate: allocated wall_adm at 000000000F46ACF0
MBUF state OFF
DpCommInitTable: init table for 500 entries
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 24573MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 24576MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
ERROR => <EsNT> CreateFileMapping name=ES_SEG_05_006 error=1455 [esnti.c 1184]
ERROR => <EsNT> paging file too small for 2044 MB mapfile [esnti.c 1186]
Memory diagnostic *
Systeminformation
Processor-Typ : Processor-Count : 8
Operating System : NT 5.2, Build 3790
Service Pack : Service Pack 2
NT Pagefile Informations
Config. minimum size : 22016000 K
Config. maximum size : 28672000 K
Avail. maximum size : 28672000 K
Num
Pagefile
Min.Size
Max.Size
Avail.Max
Curr.Size
1
c:\pagefile.sys
6144000 K
8192000 K
8192000 K
8192000 K
2
d:\pagefile.sys
4608000 K
6144000 K
6144000 K
6014664 K
3
e:\pagefile.sys
6144000 K
8192000 K
8192000 K
8115200 K
4
f:\pagefile.sys
5120000 K
6144000 K
6144000 K
6144000 K
NT Task Manager Informations
Total Handles : 0
Total Threads : 0
Total Processes : 2010476683
Commit Charge Total : 0 K
Commit Charge Limit : 2143554319 K
Commit Charge Peak : 2047 K
Phys.Memory Total : 131657184 K
Phys.Memory Available : 0 K
File Cache : 2143594271 K
Kernel Memory Total : 2047 K
Kernel Memory Paged : 393225 K
Kernel Memory Nonpaged : 5894 K
Memory usage of current process
Total virt.address space : 0000008589934464 K
Avail.virt.address space : 0000008589013404 K
Private Pages : 0 K
Total heap size : 23195 K
Virtual memory regions : 0 K
Uncommitted heap memory : 14544 K
Allocated heap memory : 7042 K
Moveable heap memory : 1137 K
DDE shared heap memory : 0 K
Memory usage of all processes
PID
Image
Instance
Work.Set
WS Peak
Priv.Pages
PP Peak
Pg Fault
7372
sapstartsrv.exe
19208 K
19208 K
21264 K
21772 K
6
6744
msg_server.EXE
[MS] BIP_05
10680 K
10680 K
14004 K
14008 K
2
7968
disp+work.EXE
42124 K
42276 K
74364 K
81588 K
10
8100
igswd.EXE
[**] BIP_05
3924 K
4204 K
2892 K
3252 K
1
7904
igsmux.exe
14484 K
14484 K
18080 K
18084 K
3
7176
igspw.exe
3376 K
3376 K
3704 K
3704 K
0
3596
igspw.exe
3376 K
3376 K
3704 K
3704 K
0
Sum
97172 K
138012 K
Error 11 while initializing OS dependent part.
ERROR => DpEmInit: EmInit (1) [dpxxdisp.c 9634]
ERROR => DpMemInit: DpEmInit (-1) [dpxxdisp.c 9561]
DP_FATAL_ERROR => DpSapEnvInit: DpMemInit
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Oct 25 11:51:17 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Sat Oct 25 06:21:17 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
0 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
1 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
2 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
3 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
4 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
5 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
6 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
7 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
8 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
9 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
10 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
11 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
12 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
13 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
14 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
15 ? -1 Free no 0 0 0
ERROR => DpRqTxt: bad rqtype -1 [dpxxrq.c 785]
16 ? -1 Free no 0 0 0
Dispatcher Queue Statistics Sat Oct 25 06:21:17 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
0
2000
0
0
--------++++--
+
DIA
0
0
2000
0
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 0
wake_evt_udp_now 0
wake events total 0, udp 0 ( 0%), shm 0 ( 0%)
since last update total 0, udp 0 ( 0%), shm 0 ( 0%)
Dump of tm_adm structure: Sat Oct 25 06:21:17 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Sat Oct 25 06:21:17 2008
=============================
Slots: 300, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Sat Oct 25 11:51:22 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >abgsapbi_BIP_05 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Terminate gui connections
wait for end of work processes
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 7968) [dpxxdisp.c 10421]
Good Bye .....
Thanks & Regards,
Darshan... -
Java-Error during Solution Manager Installation
During the Installation at point "Prepare to install minimal configuration" I'm getting the following error message:
An error occurred while processing option <i>SAP Solution Manager 7.1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step :Assertion failed: in
function NW_Call_Offline_CTC_ind_ind_ind_ind_SubComponentContainer_callOfflineCTC() {
var nw = NWInstall.getSystem(context.get("sid"));
var ctcDirFs = nw.getCI().getInstanceDir().concat("j2ee", "ctc");
var ctcExeFile = installer.onWindows() ? "LaunchOfflinectc.bat" : "LaunchOfflinectc.sh";
var ctcCall = ctcDirFs.concat(ctcExeFile);
installer.writeTrace("CTC is in" + ctcCall);
ASSERT(arguments.callee, ctcCall.isExisting(), "CTC executable cannot be found in " + ctcCall.toString());
var pmgt = new ProcessMgt();
var app = pmgt.createChildApplication(ctcCall, []);
var userData = nw.getUsers().getAccountData(NWUsers.roles.SIDAdm);
var user = (new AccountMgt()).getUser(userData.name);
var env = pmgt.getProcessEnvironment();
if (installer.onUnix()) {
env.setUser(user);
} else {
if (installer.onOS400()) {
env.setUser(user);
env.setGroup(user.getPrimaryGroup());
env.setKernelLibrary(nw.getOS4_Krnlib());
env.setWorkingDirectory(ctcDirFs.getNode());
var javaHome = nw.getJavaHome().toString();
env.setEnvironmentVariable(new Property("JAVA_HOME", javaHome));
installer.writeTrace("For the Offline CTC Call, JAVA_HOME is set to " + env.getEnvironmentVariable("JAVA_HOME"));
app.setEnvironment(env);
var retval = app.run([], true);
ASSERT(arguments.callee, retval == 0, "CTC retval is not 0 but " + retval);
installer.writeTrace("CTC has been called in Offline Mode.");
CTC retval is not 0 but 1)
As a JVM I'm using the version provided by SAP on DVD, JDK is ver6_26-rev_b21, JCE_policy is version 6.
Can anyone help me here?WARNING 2011-12-07 13:09:36.864
Execution of the command "C:\usr\sap\DSM\DVEBMGS00\j2ee\ctc\LaunchOfflinectc.bat" finished with return code 1. Output:
1 file(s) copied.
java.io.BufferedInputStream@4a4e79f1
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Start Execution of Offline CTC TemplatInstaller
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Looking for initial Properties in file '../../../config/usagetypes.properties'
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Loading of initial Properties-File successful
Dec 7, 2011 1:09:34 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Info: Selected Usages:SolManager:SolManager Java
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
Dec 7, 2011 1:09:36 PM ...ProviderFactory.initalize(Context)_1! [Thread[main,5,main]] Info:
Dec 7, 2011 1:09:36 PM ...rovider(ConfigurationProviderFactory) [Thread[main,5,main]] Info: !BrokerRegistry.register!ConfigManagerProvider
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Path: entering 'registerExtension'
Dec 7, 2011 1:09:36 PM ...DataModelRepository.registerExtension [Thread[main,5,main]] Info: registering extensions for 'http://www.sap.com/ctc/configurationmanager'
Dec 7, 2011 1:09:36 PM ...onControllerImpl.startUpProcessEngine [Thread[main,5,main]] Path: entering 'startUpProcessEngine'
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: The class XMLPathUtil_1_5 is not supported in 7.0
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: java.lang.IllegalStateException:The class XMLPathUtil_1_5 is not supported in 7.0
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.util.XMLPathUtil_1_5:getStringValue25
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.util.XMLPathUtil:getStringValue161
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transformInternal390
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transform118
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2Action:transform89
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.transform.XML2JavaProcessFactory:lightLoadProcessFromXML191
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:loadProcess402
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:getVisibleProcessesInternal350
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessRegistry:getVisibleRootProcesses222
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.metamodel.process.controller.ProcessEngine:getVisibleRootProcesses489
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:executeWizard121
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.tc.lm.ctc.OfflineTemplateImporterJAR:main585
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke0-2
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.NativeMethodAccessorImpl:invoke39
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: sun.reflect.DelegatingMethodAccessorImpl:invoke25
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: java.lang.reflect.Method:invoke597
Dec 7, 2011 1:09:36 PM ....tc.lm.ctc.OfflineTemplateImporterJAR [Thread[main,5,main]] Error: com.sap.engine.offline.OfflineToolStart:main81
Program terminated abnormally -
Error during solution manager 3.2 installation.
Hi !
I am getting the error in solution manager 3.2 installation . I am doing installation using system copy / backup restore method .
Getting ther following error -
"CJS-00084 SQL statement or script failed. DIAGNOSIS: Error message: SP2-0310: unable to open file
"CONTROL.SQL"ORA-01012: not logged onORACLE instance started."
Kindly suggest the solution.
Regards-
sanjayhi Markus!
The ora_sql_results.log file shows the following-
"2007-06-07, 18:32:21 SAPINST ORACLE start logging for
connect / as sysdba ;
CONNECT / AS SYSDBA
SHUTDOWN ABORT
@CONTROL.SQL
SHUTDOWN IMMEDIATE
STARTUP MOUNT
ALTER DATABASE ARCHIVELOG;
ALTER DATABASE OPEN;
EXIT
exit;
Output of SQL executing program:
SQL*Plus: Release 9.2.0.6.0 - Production on Thu Jun 7 18:32:21 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected.
Connected.
ORACLE instance shut down.
SP2-0310: unable to open file "CONTROL.SQL"
ORA-01012: not logged on
ORACLE instance started.
Total System Global Area 546906764 bytes
Fixed Size 455308 bytes
Variable Size 293601280 bytes
Database Buffers 251658240 bytes
Redo Buffers 1191936 bytes
ORA-00205: error in identifying controlfile, check alert log for more info
ALTER DATABASE ARCHIVELOG
ERROR at line 1:
ORA-01507: database not mounted
ALTER DATABASE OPEN
ERROR at line 1:
ORA-01507: database not mounted
Disconnected from Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.6.0 - Production
SAPINST: End of output of SQL executing program E:\oracle\SMP\920/bin/sqlplus.
SAPINST found errors.
SAPINST The current process environment may be found in sapinst_ora_environment.log.
2007-06-07, 18:32:28 SAPINST ORACLE stop logging"
What to follow... pls guide
Regards-
sanjay -
MAnaged system configuration error in solution manager
Hi,
While doing managed system configuration getting the error, below versions are using.
MDM 7.1 SP10 Import server and Solution manager 7.1 SP10.
Can anyone help me?.
Regards
ChandraTwo cases you have
1) Satellite system
Re-install The DIA agent and give correct (port numbers )SLD details
Once you re-install the DIA agent, run Rz70 from satellite system
data will pull from satellite system to central SLD.
2)Run SLD check from Solman system , check its successful or not
Go to LMDB and check satellite system
After re-Synchronize technical system from SLD
Thanks ,
Rahul yedapally -
How to get the Solution Manager Installer
Hello.
I am trying to install Solution Manager and then get the Solution Manager key.
*But I can't download the Solution Manager installation Program. I am searching the installer for a almost week
Please can anybody help me?Hi,
If you are looking for installing solution Manager you need to have below softwares
1:IM (Installation Master)
2:Exports DVD's
3:Kernel DVD
4:JAVA DUMP
5:Database software
6:JCE Polic
7:J2SDK
If can find the same at service market place www.service.sap.com/swdc>Click on tab Installation and Upgrades>click on A-Z Index>Right side colum click on S>now select solution Manager,there you can find the list of softwares you are looking for.
Regards
Uday -
Installing the License Key for Solution Manager installation
Hi,
Any Idea how can I get License Key for solution manager installation? Solution manager installation do not requires a key of Solution Manager.
When I want to download a new license file form the SAP market place.SAP I ask for a key of Solution Manager.
ThanksI guess it is hardware key. Go to the Tcode slicense and there you will be able to find out the active hardware key. Take it!!
-
Error in Import JAVA DUMP phase in Solution Manager installation.
Hi,
when i am installing Solution manager i am getting error in import java dump phase on windows and oracle database. i installed java 1.4.2_09 . plz anybody give the solution. Its very urgent.
Thanks,
Venkat.Hi,
1. Did you select java path (Export CD/DVD) while intsallation? Check once again.
2. Add JAVA_HOME = Java path in environment variable.
3. What is the exact error, you got it, post error here.
Regards,
Srini Nookala -
Error in Solution Manager 4.0 Installation
When installing Solution Manager 4.0 on Windows server 2003 with Oracle 10g, Installation
failed at Import ABAP.
The Error message is :-
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log
file(s) import_monitor.java.log, import_monitor.log.
import_monitor.java.log
java version "1.4.2_12"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_12-b03)
Java HotSpot(TM) Client VM (build 1.4.2_12-b03, mixed mode)
Import Monitor jobs: running 1, waiting 5, completed 12, failed 0, total 18.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 5, completed 12, failed 1, total 18.
Import Monitor jobs: running 1, waiting 4, completed 12, failed 1, total 18.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 12, failed 2, total 18.
Import Monitor jobs: running 1, waiting 3, completed 12, failed 2, total 18.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 0, waiting 3, completed 12, failed 3, total 18.
Import Monitor jobs: running 1, waiting 2, completed 12, failed 3, total 18.
Loading of 'SAPSDOCU' import package: ERROR
import_monitor.log
WARNING: 2006-07-27 09:47:26
Cannot start import of packages with views because not all import packages with tables are
loaded successfully.
WARNING: 2006-07-27 09:47:26
4 error(s) during processing of packages.
INFO: 2006-07-27 09:47:26
Import Monitor is stopped.
The Java version we are using is - j2sdk-1_4_2_12-windows-i586-p
Any guidance will be appreciated
Thanks
Gireeshganesh if solved ur problem plz help me
my solman 4 running since 3 days at import abap 16 phase of 42.
plz help me
following error in log
INFO: 2007-04-19 20:36:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is successfully completed.
INFO: 2007-04-19 21:40:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is successfully completed.
WARNING: 2007-04-19 21:40:22
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2007-04-19 21:40:22
1 error(s) during processing of packages.
INFO: 2007-04-19 21:40:22
Import Monitor is stopped.
and
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Returncode of C:\j2sdk1.4.2_12\bin\jar.exe: 0
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Jar file local_policy.jar is not included in zip file F:\sldprofile.zip, returning false
TRACE [iaxxdlghnd.cpp:657]
CDialogHandler::doHandleDoc() -
Solution Manager Installation Error "SAP SOLUTION MANAGER 7.0 EHP 1"
I am new to SAP and currently trying to install SOLMAN 7.0 EHP 1 on Windows Server 2008 R2. I have read the documentation also. For JDK I have used "j2sdkfb-1_4_2_24-rev-b06-windows-amd64.exe" which looks to be working fine.
The installation process runs fine until it hits "Start Instance" the message on the bottom says "Starting instance xxx/DVEBMGSOO" (where xxx is my sid) and then its times out after 10 minute. After timing out I get the following error on the window.
An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > Oracle > Central System > Central System( Last error reported by the step: ABAP processes of instance ORC/DVEBMGS00 ABAP: UNKNOWN did not start after 10:00 minutes. Giving up.). You can now:
Choose Retry to repeat the current step.
Choose Log Files to get more information about the error.
Stop the option and continue with it later.
Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/ORA/CENTRAL/AS.
Though the installation steps are not fully completed but I do see SAP management Console and when I open it I see two process running "msg_server.exe" & "igswd.exe" The process dispwork.EXE starts in the beginning and then stops and stays stopped. I tried restarting all the process again but only tow of them starts and the process "dispwork.EXE" starts but then stops again. I also did a NEW installation considering a file could have been corrupted or something else but the installation process stops and the same place. I am sure ppl have installed SOLMAN on windows 2008 R2 and this error seems common to me. Please assist. Any tips would be nice.
Edited by: amirsd on Aug 3, 2011 5:53 PMHi,
Please check the below
1) ip/host entries should be in /etc/hosts
2) patch the latest kernel for 2008 R2
and re run installation
Regards,
Ram -
Solution Manager Installation Fails at step Run ABAP Reports
I'm trying to install Solution Manager 4.0 on Windows 2003 using SQL 2005. The installation fails at the Run ABAP Reports step: Executing ABAP report RADDBDIF
I have logged in manually and run the RADDBDIF job in SE38 but I receive the same error message. My SAPTRANHOST is properly defined and so are the shares. Can anyone help? Thank!
Here's the sapinst_dev.log:
Calling function module: INST_RFC_GET_INTERFACE
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1065]
CAbRfcImpl::performFunctionCall
Function call was successful.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1066]
CAbRfcImpl::performFunctionCall
Function module call succesful: INST_RFC_GET_INTERFACE
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:924]
CAbRfcImpl::getRfcInterfaceSAP
Function interface generated successfully.
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:926]
CAbRfcImpl::getRfcInterfaceSAP
Technical properties of function set successfully.
INFO 2008-10-21 14:00:34.842 [iaxxrfcfls.cpp:107]
CRfcFuncRep::insFuncIf
Information for application function INST_EXECUTE_REPORT copied to local repository.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcfls.cpp:108]
CRfcFuncRep::insFuncIf
Function interface entered into repository for INST_EXECUTE_REPORT
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:622]
CAbRfcImpl::setFunction
Function module INST_EXECUTE_REPORT set successfully.
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setFunction() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter(PARA, [])
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter(PROGRAM, RADDBDIF)
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.setParameter() done: true
TRACE 2008-10-21 14:00:34.842
2008-10-21 14:00:34.842 JSCo.execute()
INFO 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1032]
CAbRfcImpl::callFunction
Executing function call INST_EXECUTE_REPORT.
TRACE 2008-10-21 14:00:34.842 [iaxxrfcimp.cpp:1056]
CAbRfcImpl::performFunctionCall
Calling function module: INST_EXECUTE_REPORT
ERROR 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1089]
CAbRfcImpl::performFunctionCall
FRF-00025 Unable to call function. Error message: Exception condition "WRITE_FAILED" raised. .
TRACE 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1090]
CAbRfcImpl::performFunctionCall
RFC failure or system exception raised
TRACE 2008-10-21 14:00:35.045 [iaxxrfcimp.cpp:1091]
CAbRfcImpl::performFunctionCall
Exception condition "WRITE_FAILED" raised.
INFO 2008-10-21 14:00:35.045 [iaxxbjsco.cpp:561]
CIaJSCo::disconnect_nothrow(000:DDIC:EN:nath02:00::SOL:)
RFC connection closed.
TRACE 2008-10-21 14:00:35.45 [iaxxejsbas.hpp:408]
handleException<ERfcExcept>()
Converting exception into JS Exception ERfcException.
TRACE 2008-10-21 14:00:35.045
Function setMessageIdOfExceptionMessage: modlib.jslib.caughtException
ERROR 2008-10-21 14:00:35.045
CJSlibModule::writeError_impl()
MUT-03025 Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..
TRACE 2008-10-21 14:00:35.45 [iaxxejsbas.hpp:483]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-10-21 14:00:35.45 [sixxcstepexecute.cpp:951]
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR ( Last error reported by the step :Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..).
TRACE 2008-10-21 14:00:35.61 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP Solution Manager 4.0 Support Release 4 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step :Caught ERfcExcept in Modulecall: Exception condition "WRITE_FAILED" raised..). You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS. </p> </body></html>
TRACE 2008-10-21 14:00:35.61 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUIHello Amélie,
Check the file systems if you're not ran out of disk space.
Second, check the database if you've enough storage space left.
Hope it helps.
Cheers,
Satish. -
Error importing SP in Solution Manager System (phase XPRA_EXECUTION)
Dear community,
I have a fresh installation of Solution Manager System 7.1 (central system) in a test environment.
During post-installation I wanted to apply SP (user DDIC, client 000), but my update queue via SPAM failed in phase 23 (XPRA_EXECUTION) and I have no idea how to handle that. Error message:
- Error in phase: XPRA_EXECUTION
- Reason for error: TP_STEP_FAILURE
- Return code: 0008
- Error message: OCS Package SAPK-70203INSAPBSFND, tp step R, return code 0008
To check the cause of the error it is recommended to choose Goto -> Log -> Queue.
Choosing Goto -> Action Log, I find:
Error during executing the tp command 'tp XPA ALL SOL ...'
tp return code: '0008' , tp message: 'A tool used by tp produced errors', tp output:
Choosing Goto -> Import Logs -> tp system logs, I find:
START EXECUTION OF REPORTS SOL R 20120104111325 DDIC biss-labor01
START tp_getprots SOL R 20120104111325 DDIC biss-labor01
ERROR SAPK-70203INSAPBSFND SOL R 0008 20120104111331 SAPBSFNDUSER DDIC biss-labor01
ERROR SAPK-70204INSAPBSFND SOL R 0008 20120104111331 SAPBSFNDUSER DDIC biss-labor01
ERROR SAPKITL701 SOL R 0008 20120104111335 STUSER DDIC biss-labor01
STOP tp_getprots SOL R 20120104111338 DDIC biss-labor01
STOP EXECUTION OF REPORTS SOL R 20120104111338 DDIC biss-labor01
An excerpt (3 lines) from ulog:
APServiceSOL 20120104122229 RFC: tp SHOWPARAMS SOL pf=
biss-labor01sapmnt rans inTP_DOMAIN_SOL.PFL -Dtransdir=
biss-labor01sapmnt rans (pid=6232)
APServiceSOL 20120104122229 RFC: tp CONNECT SOL pf=
biss-labor01sapmnt rans inTP_DOMAIN_SOL.PFL -Dtransdir=
biss-labor01sapmnt rans (pid=6232)
APServiceSOL 20120104122231 RFC: tp XPA ALL SOL pf=
biss-labor01sapmnt rans inTP_DOMAIN_SOL.PFL -Dclientcascade=yes -Dstoponerror=8 -Drepeatonerror=8 -Dsourcesystems= -Dbuffreset=yes -Dbatch_proc=1 tag=spam -Dtransdir=
biss-labor01sapmnt rans (pid=6232)
What I already tried:
- retry importing
- stop and start the system, then retry importing
- check for background jobs (rdd* ) that failed via transaction SM37, but there are none that have been canceled
- reset buffers via transaction /$sync
Any input, suggestions or help is highly appreciated!
Regards
SönkeHi Sönke,
it seems we are making progress at last.
I'm afraid I didn't make my suggestion about splitting items very clear. I meant to say try applying your SPAM queue in several parts splitting up the packages affected so they are applied individually.
SAPK-70203INSAPBSFND
SAPK-70204INSAPBSFND
SAPKITL701
SAPKB70207
I think default behaviour for SPAM/SAINT is to calculate the entire queue automatically based on EPSIN but you can override this behaviour and choose to split your queue into shorter ones, you simply choose carefully the last package, apply this queue, then choose the next queue and so on until you are done. There used to be special notes which had recommended split points for package queues
EDIT: I checked your link and I don't think it is helpful unfortunately.
Best regards,
Mark.
Edited by: Mark Birch on Jan 11, 2012 2:07 PM -
Error in creating Java Users during Solution Manager installation
Hi gurus,
First time trying to install SAP.
Red Hat Linux 4
Oracle
jdk 1.4.2_11
While installing the Solution Manager, it errored when it was creating Java Users, SAPJSF, J2EE_ADMIN and J2EE_GUEST.
The error description read "jco$exception: rfc_error_system_failure: invalid request".
I want to create these users manually and continue with the rest of process.
I searched lots of entries, notes, etc., but somehow, my "old" pair of eyes (and brains, too) failed to come up with something I could understand.
So, gurus, please help, help, help!!
There are no GUI version of anything installed, no Virtual Admin, no nothing like that. I have to rely on good old unix (Linux) command to do (add users) this.
Can you please, please post the instructions (step-by-step)? Please have a pity on me since this is my very first time dealing with SAP.
Thanks and regards.Creating users manually is not the intension of the SAP Installation tool. There are other solutions available
A good starting point is to check if SELinux is enabled or disabled. I've seen lots of broken installations on Red Hat because SELinux does not allow the installer to create users. Check if in /etc/selinux/config the setting
SELINUX=disabled
is set.
I see, that you are using JDK 1.4.2_11. Is this the Sun JDK? In case you are on x86_64 you have to use the IBM JDK instead. You can download it from <a href="https://www14.software.ibm.com/webapp/iwm/web/reg/download.do?source=lxdk&S_PKG=amd64142sr7&S_TACT=105AGX05&S_CMP=JDK&lang=en_US&cp=UTF-">here</a> .
Also a new SAPINST may help. The current Installation Master CD can you download here:
http.//service.sap.com/swdc
-> Download
-> Installations and Upgrades
-> Entry by Application Group
-> SAP Technology Components
-> SAP SOLUTION MANAGER
-> SAP SOLUTION MANAGER 3.2/4.0
-> Installation and Upgrade
-> LINUX
-> ORACLE
51032006 SAP Solution M. 4.0 SR1 Inst. Master **
Best Regards,
Hannes Kuehnemund -
Error in Solution Manager 4.0 Installation u0096 Step 32 Create JAVE users
Hi All,
I am installing Solution Manager 4.0 on WIN server 2003 & Oracle10g. The installation has been successful so far but at Step 32 (Create JAVA users) the installation errors and the error log is as follows:
ERROR 2016-09-10 06:39:28
CJS-30197 . For more details see output of logfile:
ERROR 2016-09-10 06:39:28
FCO-00011 The step createJSF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
Entries in the log file (UserCheck.log)
Critical Error
Launching program failed
-> Invalid JDK (rc = -17)
The Java version Im using is - j2re1.4.2_12 windows.
Any guidance will be appreciated
Thanks
FrankDear all
use j2re1.4.2_16 windows.
case1-if sapjsf user not craeted login to 001 clint with sap* delete
case2- if sapjsf user not craete a sapjsf user createand then delete
agin proceed
i am trouble this problem within week
but at last complte of the installation
thanks
regards
venkat -
Oracle Errors while Solution Manager 4.0 installation on linux
While installing Oracle 10g instance for Solution Manager 4.0, The following popup message displayed. I checked the log file and not much information. Please tell me what shall I need to do.
Error message:
Error in invoking target 'ntcontab.o' of make file '/oracle/<sid>/102_32/network/lib/ins_net_client.mk'
see '/oracle/orainventory/logs/installActions2006-10-08_06-39-02PM.log' for details
Thanks in advance
Regards
SrinivasHello, have some one solved the problem ? I have the same problem on SLES9. I have fond note #499055. There are something about relinking files during Oracle installation on Linux. Please give an information did You soled a problem.
Best Regards
Marcin Sobolewski
Maybe you are looking for
-
Changes in BDC program to upload data from text/excel file
Hi friends i have obtained the BDc program after recording : start-of-selection. perform open_group. perform bdc_dynpro using 'SAPLCOIH' '0100'. perform bdc_field using 'BDC_CURSOR' 'CAUFVD-GSBER'. perform bdc
-
Keeping text together (on a single line) in pages 09
I apologize if a solution for this has been posted... I am having trouble keeping certain pieces of text constrained to one line. They are invariably pieces of text containing symbols. For instance, let's say S/N shows up as the last word on a line.
-
HDMI monitor, detected as television, causing problems
I have an Acer H233H monitor that is connected to a 2010 mini via HDMI. In display preferences it is detected as a television. This is causing problems with some games. The games will only let me choose 50hz refresh rates, when the desktop is running
-
What settings to make cpu not use its...
Hi when I Overclock my 4690k, obviously it will run on its full speed even when at idle mode or not playing, MSI boards has this settings to make cpu not use its full power when on idle mode,, so what settings is it??? Anyone???
-
FCE file sizes are twice the size of Quicktime's - any advantage to FCE?
When I capture footage from my Canon HV40 MiniDV using FCE, the file sizes are almost twice the size as when I capture using Quicktime's Device Native setting. Is there any advantage to capturing with FCE, as the quality seems the same? Or is there a