ABAP Import Phase DDL Statement Error

Hi Experts!
I am installing SAP Netweaver PI 7.3 EHP1 and encountered an error in the ABAP import phase.
I checked the import monitor logs and found a clue about SAPVIEW.log.
I have checked the SAPVIEW.log and found out the following:
ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG:
Please help!
Also please let me know if any further detail is required.
Regards,
Ayan

Gaurav,
Please find the below pasted trace from SAPVIEW.log
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823014048
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -ctf I /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DATA/SAPVIEW.STR /tmp/sapinst_instdir/NW731/DB6/INSTALL/STD/AS/DDLDB6.TPL SAPVIEW.TSK DB6 -l SAPVIEW.log
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job completed
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823014048
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823014048
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) INFO: /BI0/MHIER_VERS created #20140823014054
(DB) INFO: /BI0/RALEAFNODCH created #20140823014054
(DB) INFO: /BI0/RALEAFNODSP created #20140823014054
(DB) INFO: /BI0/RBUCKET created #20140823014054
(DB) INFO: /BI0/RCALMONTH created #20140823014054
(DB) INFO: /BI0/RCALMONTH2 created #20140823014054
(DB) INFO: /BI0/RCALQUART1 created #20140823014054
(DB) INFO: /BI0/RCALQUARTER created #20140823014054
(DB) INFO: /BI0/RCALWEEK created #20140823014054
(DB) INFO: /BI0/RCALYEAR created #20140823014054
(DB) INFO: /BI0/RCHNGID created #20140823014054
(DB) INFO: /BI0/RCURRENCY created #20140823014054
(DB) INFO: /BI0/RDATE created #20140823014054
(DB) INFO: /BI0/RFISCPER created #20140823014054
(DB) INFO: /BI0/RFISCPER3 created #20140823014054
(DB) INFO: /BI0/RFISCVARNT created #20140823014054
(DB) INFO: /BI0/RFISCYEAR created #20140823014054
(DB) INFO: /BI0/RHALFYEAR1 created #20140823014054
(DB) INFO: /BI0/RHIENM created #20140823014054
(DB) INFO: /BI0/RHIER_HIEID created #20140823014054
(DB) INFO: /BI0/RHIER_NODE created #20140823014054
(DB) INFO: /BI0/RHIER_VERS created #20140823014054
(DB) INFO: /BI0/RINFOPROV created #20140823014054
(DB) INFO: /BI0/RIOBJNM created #20140823014054
(DB) INFO: /BI0/RLANGU created #20140823014054
(DB) INFO: /BI0/RLOGSYS created #20140823014054
(DB) INFO: /BI0/RNODEPOSIT created #20140823014054
(DB) INFO: /BI0/RNORESTNODE created #20140823014054
(DB) INFO: /BI0/RRATE_TYPE created #20140823014054
(DB) INFO: /BI0/RRECORDMODE created #20140823014054
(DB) INFO: /BI0/RRECORDTP created #20140823014054
(DB) INFO: /BI0/RREQUID created #20140823014054
(DB) INFO: /BI0/RSIGNCH created #20140823014054
(DB) INFO: /BI0/RSOURSYSTEM created #20140823014054
(DB) INFO: /BI0/RTIME created #20140823014054
(DB) INFO: /BI0/RTXTLG created #20140823014054
(DB) INFO: /BI0/RTXTMD created #20140823014054
(DB) INFO: /BI0/RTXTSH created #20140823014054
(DB) INFO: /BI0/RUNIT created #20140823014054
(DB) INFO: /BI0/RWEEKDAY1 created #20140823014054
(DB) INFO: /BI0/ZBUCKET created #20140823014054
(DB) INFO: /BI0/ZCALMONTH created #20140823014054
(DB) INFO: /BI0/ZCALMONTH2 created #20140823014054
(DB) INFO: /BI0/ZDATE created #20140823014054
(DB) INFO: /BI0/ZFISCPER created #20140823014055
(DB) INFO: /BI0/ZHALFYEAR1 created #20140823014055
(DB) INFO: /BI0/ZINFOPROV created #20140823014055
(DB) INFO: /BI0/ZIOBJNM created #20140823014055
(DB) INFO: /GC1/VXXX created #20140823014055
(DB) INFO: /OSP/V_RAUI_CHRD created #20140823014055
(DB) INFO: /OSP/V_RAUI_CMVD created #20140823014055
(DB) INFO: /OSP/V_RAUI_CPVD created #20140823014055
(DB) INFO: /OSP/V_RAUI_CSED created #20140823014055
(DB) INFO: /OSP/V_RAUI_DCDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_GRPD created #20140823014055
(DB) INFO: /OSP/V_RAUI_MTD created #20140823014055
(DB) INFO: /OSP/V_RAUI_MVDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_PBDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_RDDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_RFCD created #20140823014055
(DB) INFO: /OSP/V_RAUI_RMTD created #20140823014055
(DB) INFO: /OSP/V_RAUI_RTDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_SCD created #20140823014055
(DB) INFO: /OSP/V_RAUI_SCHD created #20140823014055
(DB) INFO: /OSP/V_RAUI_SELD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TMVD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TPBD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TPDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_TPRD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TRGD created #20140823014055
(DB) INFO: /OSP/V_RAUI_VARD created #20140823014055
(DB) INFO: /SAPAPO/GEWICHT created #20140823014055
(DB) INFO: /SAPAPO/TRENDAM created #20140823014055
(DB) INFO: /SAPAPO/VWALPROF created #20140823014055
(DB) INFO: /SAPPO/FULL_HINT created #20140823014055
(DB) INFO: /SAPPO/V_PPOCMPL created #20140823014055
(DB) INFO: /SAPPO/V_PPO_UPD created #20140823014055
(DB) INFO: /SAPTRX/A_CONDF4 created #20140823014055
(DB) INFO: /SAPTRX/EE_FLDS created #20140823014055
(DB) INFO: /SAPTRX/MSG_PARA created #20140823014055
(DB) INFO: /SAPTRX/MSG_PTAB created #20140823014055
(DB) INFO: /SAPTRX/STR_FLDS created #20140823014055
(DB) INFO: /SAPTRX/VDASFEV created #20140823014055
(DB) INFO: /SAPTRX/VDASFPAR created #20140823014055
(DB) INFO: /SAPTRX/VD_AOMIL created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAC created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAE created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAI created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAR created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTD1 created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTD2 created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTDD created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTYP created #20140823014055
(DB) INFO: /SAPTRX/VD_ASPAR created #20140823014055
(DB) INFO: /SAPTRX/VD_CONDL created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD1 created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD2 created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD3 created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD4 created #20140823014055
(DB) INFO: /SAPTRX/V_AODD02 created #20140823014055
(DB) INFO: /SAPTRX/V_DD03 created #20140823014055
(DB) INFO: /SAPTRX/V_DD03X created #20140823014055
(DB) INFO: /SDF/CMO_OBJ_TR created #20140823014055
(DB) INFO: /SDF/CMO_SMDCMP created #20140823014056
(DB) INFO: /SDF/CMO_SMDDVC created #20140823014056
(DB) INFO: /SDF/CMO_UMDCMP created #20140823014056
(DB) INFO: /SDF/SMODICOMP created #20140823014056
(DB) INFO: /SDF/SMODIDEVC created #20140823014056
(DB) INFO: /SDF/UMOD_COMP created #20140823014056
(DB) INFO: AKB_TRHD_DETAIL created #20140823014056
(DB) INFO: ALTEXTHIST created #20140823014056
(DB) INFO: APPL_DEVC created #20140823014056
(DB) INFO: APPL_DIAL created #20140823014056
(DB) INFO: APPL_DOMA created #20140823014056
(DB) INFO: APPL_DTEL created #20140823014056
(DB) INFO: APPL_ENQU created #20140823014056
(DB) INFO: APPL_FUGR created #20140823014056
(DB) INFO: APPL_FUGRG created #20140823014056
(DB) INFO: APPL_FUNC created #20140823014056
(DB) INFO: APPL_INDX created #20140823014056
(DB) INFO: APPL_MCOB created #20140823014056
(DB) INFO: APPL_MENU created #20140823014056
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823014056
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823014312
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823014318
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823015246
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823015250
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140825011924
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140825011937
Please look into this..
Regards,
Ayan

Similar Messages

Error in ABAP Import Phase - 3 jobs failed

Hi,
My installation of ECC IDES has failed in ABAP Import phase.
3 jobs has failed.
I figured out from the logs that there are 3 loads that has failed.
Failed loads are SAPPOOL, SAP0000 and SAPSLEXC.
The prominant error in them are as below. Please assist to relsove
these errors.
SAPPOOL.log
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT
NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN"
SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA )
IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293"
bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
SAP0000.log
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( CREATE TABLE "REPOLOAD" ( "PROGNAME" SAPDB6CHAR(40) DEFAULT ' ' NOT
NULL , "R3STATE" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "MACH"
SMALLINT DEFAULT 0 NOT NULL , "UNAM" SAPDB6CHAR(12) DEFAULT ' ' NOT
NULL , "UDAT" SAPDB6CHAR(8) DEFAULT '00000000' NOT NULL , "UTIME"
SAPDB6CHAR(6) DEFAULT '000000' NOT NULL , "L_DATALG" INTEGER DEFAULT 0
NOT NULL , "Q_DATALG" INTEGER DEFAULT 0 NOT NULL , "SDAT" SAPDB6CHAR(8)
DEFAULT '00000000' NOT NULL , "STIME" SAPDB6CHAR(6) DEFAULT '000000'
NOT NULL , "MINOR_VERS" SMALLINT DEFAULT 0 NOT NULL , "MAJOR_VERS"
INTEGER DEFAULT 0 NOT NULL , "LDATA" BLOB(1G)LOGGED , "QDATA" BLOB(1G)
LOGGED ) IN DGS#EL700D INDEX IN DGS#EL700I LONG IN DGS#EL700D )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
SAPSLEXC.log
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( CREATE TABLE "CO2MAP" ( "ID" INTEGER DEFAULT 0 NOT NULL , "SRCLINE"
INTEGER DEFAULT 0 NOT NULL , "PAGELINE" INTEGER DEFAULT 0 NOT
NULL , "IDINCL" INTEGER DEFAULT 0 NOT NULL , "SRCOFF" SMALLINT DEFAULT
0 NOT NULL , "PAGEOFF" SMALLINT DEFAULT 0 NOT NULL ) IN DGS#EL700D
INDEX IN DGS#EL700I LONG IN DGS#EL700D )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
Thanks and Regards,
Hussian Sehorewala
Edited by: Hussain Sehorewala on May 5, 2011 1:28 PM

Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110504190648
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -ctf I Q:\1000082149\1\ABAP\DATA\SAPPOOL.STR C:\Program Files\sapinst_instdir\CRM70\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP\DDLDB6.TPL SAPPOOL.TSK DB6 -l SAPPOOL.log
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job completed
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110504190648
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110504190648
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) INFO: AANK created #20110504190649
(DB) INFO: AANK~0 created #20110504190649
(IMP) INFO: import of AANK completed (0 rows) #20110504190649
(DB) INFO: AANL created #20110504190649
(DB) INFO: AANL~0 created #20110504190649
(IMP) INFO: import of AANL completed (0 rows) #20110504190649
(DB) INFO: ATAB created #20110504190649
(DB) INFO: ATAB~0 created #20110504190649
(DB6) Using LOAD API for table ATAB
(IMP) INFO: import of ATAB completed (2719993 rows) #20110504190723
(DB) INFO: BPHIER created #20110504190723
(DB) INFO: BPHIER~0 created #20110504190723
(IMP) INFO: import of BPHIER completed (0 rows) #20110504190723
(DB) INFO: CFIS created #20110504190723
(DB) INFO: CFIS~0 created #20110504190723
(IMP) INFO: import of CFIS completed (0 rows) #20110504190723
(DB) INFO: CRVP created #20110504190723
(DB) INFO: CRVP~0 created #20110504190723
(IMP) INFO: import of CRVP completed (0 rows) #20110504190723
(DB) INFO: DEBI created #20110504190723
(DB) INFO: DEBI~0 created #20110504190723
(IMP) INFO: import of DEBI completed (0 rows) #20110504190723
(DB) INFO: DVPOOL created #20110504190723
(DB) INFO: DVPOOL~0 created #20110504190723
(IMP) INFO: import of DVPOOL completed (0 rows) #20110504190723
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110504190723
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505112616
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505112617
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505113814
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505113815
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505114629
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505114629
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505120819
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505120819

ABAP Import Phase error during Install

Hi out there. I am installing an ERP system ECC 6.0 SR3 with just the AS ABAP and ECC components. It is now on the ABAP import phase and returns the error that certain ABAP objects are failing out of the 112 objects that is processing. Current examples are : -
=============================================================================
Loading of 'SAPSDIC_2' import package: ERROR
(DB) ERROR: DDL statement failed
(CREATE INDEX "VRSX2~1" ON "VRSX2" ( "RELID" , "OBJNAME" , "VERSNO" ) )
DbSlExecute: rc = 99
(SQL error -602)
error message returned by DbSl:
=============================================================================
Loading of 'DD03L' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
Loading of 'SAPAPPL2_9' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
I wish to know how else can 1 work around this ABAP import phase with errors such as these? Is there a manual procedure I can perform for this phase during installations so to avoid these errors that come up. And then re-run the install that goes past this?
Any help will be greatly appreciated.
Thanks in advance.

Hi
Try increasing your shared pool size
login to database level
sqlplus "/as sysdba"
>show parameter shared_pool_size;
if the value is some thing aroung 150 to 200 MB increase it to 250MB
>alter sytem set shared_pool_size=250M scope=both;
Hope this will solve your problem
Regards
Uday

ABAP IMPORT phase is slow in ECC 6.0 installation on Solaris 10

Hi gurus,
I installed ECC 6.0 on Solaris 10 operating system and Oracle 10.2.0.2. I installed all solaris patces and Oracle interim patches before the installation. Firstly I added only 2 parameters in /etc/system file. This parameters like this: "set shmsys:shminfo_shmmax=0xffffffffffffffff" ,"set rlim_fd_cur=8192". Then I started the installation. When the system check the parameters I have medium warning about set shmsys:shminfo_shmmax=0xffffffffffffffff .After that I didn't restart the solaris machine and recheck the parameters.After I removed this parameter I didn't have any warning and I started the installation. Everything was ok. I don't have any error about installation. The processes are continueing but now ABAP import is very very slow. Only 5 processes finished from 38 in ABAP IMPORT phase in 14 hours. Is it normal? Why this step is very slow? What can I do to increase this step? If I add "set shmsys:shminfo_shmmax=0xffffffffffffffff" again when processes is running, does this step accelerate? If I change the /etc/system parameters do I have to restart the solaris machine? What can I do to resolve this problem?
Best regards,

Hi Arif
<i>Only 5 processes finished from 38 in ABAP IMPORT phase in 14 hours. Is it normal?</i>
No, this is not normal. As far as i know, it is possible to set a parallel degree in sapinst. Of course this needs more hardware ressources. Did you do that?
To further diagnose your problem, you should check cpu and disk usage. It would be interesting which are the top processes running. Either your system is too slow, or some ressource is a bottleneck.
Regards
Michael

SAP Ecc6.0 Installation error during ABAP Import Phase 20 of 24

While I am installing SAP ECC 6.0 with Original DVD. I am getting some Issues.
I had finished upto 4 stpes . and after that IMPORT ABAP, showing error in " Log files are written to C: Program files:sapinst......"
Please Retry , View Log & Stop.
I am clicking Retry again it will be come same issue. Please Let me know.
Log Files Name - "ABAP Processors of Instances SID\DVEMGS00"

Still I am getting same problem in mine SAP ECC6.0 Installation.
In Abap Instance Phase 20 of 24. Error in ABAP Instance. I check the mmc.
Disp+work is in Gray Color. Remainiing Server Green Color. After Few minutes it will stopped in Work Process.
Still Going Installation for same Process.
Let me know.

Error in ABAP Import Phase: Solution Req. Immediately

Hello,
I am installing Nerweaver 2004s SR2 in my Desktop, I got following error in middle.
OS:windows 2003 server
DB: Oracle 10g
SAP: Netweaver 2004s SR2
Error Phase: 19 ( ABAP Import )
Error log details in r3load.exe.log
*sapparam: sapargv( argc, argv) has not been called.*
*sapparam(1c): No Profile used.*
*sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090812095644*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]*
*Compiled Sep 1 2006 00:38:35*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -testconnect*
*DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541*
*DbSl Trace: CONNECT failed with sql error '12541'*
*DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541*
*DbSl Trace: CONNECT failed with sql error '12541'*
*(DB) ERROR: db_connect rc = 256*
*DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541*
*DbSl Trace: CONNECT failed with sql error '12541'*
*DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541*
*DbSl Trace: CONNECT failed with sql error '12541'*
*(DB) ERROR: DbSlErrorMsg rc = 99*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090812095648*

Hi Sanjeev,
Check if the listner is running.
Note 609332 - Composite note: ORA-12541/ORA-12224
1182782
Regards
Ashok Dalai

Install IDES ECC6- Abap Import phase error

Hi all,
I have seen many post on this error but I have not still understood why it happens.
I have tried to install an IDES ECC6 on Windows 2003S 32 bit with 4gb of RAM on a VMWARE virtual machine.
I have done all the preparation steps:
1) adjust network performance
2) set virtual memory as the installed RAM + 8GB
3) set the HOSTS file with the IP address
4) installed Java SDK with JAVA_HOME environment variable
I have installed Oracle (delivered with the kit) and the patch and then started the SAPINST (under I386).
In the APAB Import phase all the tasks (1 from 19) are stopped since Oracle is no more available.
All the posts suggest to enlarge the shared_pool_size.
But why this happens ?
The install procedure should work without any Oracle parameter modification.
Any idea ?
Thank
Andrea

Hi
Try increasing your shared pool size
login to database level
sqlplus "/as sysdba"
>show parameter shared_pool_size;
if the value is some thing aroung 150 to 200 MB increase it to 250MB
>alter sytem set shared_pool_size=250M scope=both;
Hope this will solve your problem
Regards
Uday

Cannot reset the queue from import phase by DDIC_ACTIVATION error in SAINT

Dear All,
The add-on installation terminated during phase DDIC_ACTIVATION in SAINT.
I cannot reset the queue from import phase after import the SAPK-600AGINP3A and SAPK-60001INAFS.
How can I do to reset it ???
Please help
Thanks

> Table J_3ACSIZ could not be activated
> (E- J_3ACSIZ-ZZAUFMENG (combination reference table/field J_3ACSIZ-ZZME does not exist) )
> Table J_3APVAS could not be activated
> Table KOMP could not be activated
> (E- KOMP-ZZAUFMENG (combination reference table/field KOMP-ZZME does not exist) )
> Table J_3ACSIZ could not be activated
> (E- Table J_3ACSIZ does not exist )
You added apparently some fields to a table (ZZ*) and you did not maintain that modification when SPAM requested you to do so. Now the tables should be activated but the field is missing.
Markus

Installation ABAP import phase problem

Dear Friends,
I am installing ABAP application server within Netweaver 7.02 which has been downloaded from this site on my LAPTOP.
Phases 1 -15 took about 2 hrs to install.
After that it entered Phase 16 i.e Import ABAP and it has gone on for more that 12 hrs.
Of the 37 processes in this phase the last 2 doesn't complete. One is shown as running and other is waiting.
My Laptop has around 320GB HDD(100 GB free) 4 GB RAM of which only 3GB is usable as it as 32 bit OS,2.4 GHZ Core 2 Duo
processor and Windows Vista.
I think it is abnormal to continue for so long.
It does not show any error message nor any problem in the log.
What is the problem?
Pls advise.
Thamk for your efforts.

Hi Sunny,
"Speed of this phase depends on number of things:
1) How many number of parallel jobs you have selected in sapinst ?
2) 4 GB of RAM is not much. So, it will take time."
1)How do I check the number of parallel jobs?
I think only one job is running because in the taskbar for the Installer it shows:
Import job Monitor: Running 1, Waiting 1, Failed 0, Completed 35, Total 37
The phase is Import ABAP and it has several jobs i.e threads of which only one is running.
2) Of the 4 Gb RAM only 3 GB is usable by Windows as it is 32 bit.Now of this Memory utilization is 65- 70%.
CPU utilization is 10-15%.
Since resource utilization is very less it is taking enormous amount of time.
As per documentation installation on a Laptop should not take more than 8 hrs but it has taken double the time i.e 16 hrs.
How much more time will it take?
Is there any way to speed it up ?
Thanks.

ABAP Import Error on Solution Manager Installation

Dear Guru's,
I'm installing solution manager 7.0 SR4 on AIX 5.3 with DB2 9.5, in the ABAP Import phase its throwing error message.
Error Message
WARNING 2010-04-27 11:29:41.914
Execution of the command "/usr/sap/SM1/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SM1/SYS/exe/run/R3load: START OF LOG: 20100427112940
WARNING[E] 2010-04-27 11:29:41.917
CJS-30023 Process call '/usr/sap/SM1/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SM1' as 'sapsm1' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR 2010-04-27 11:29:42.429
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
Kindly suggest me a solution for the above issue.
regards,
Guna

Hi,
As per your request, trans.log has been pasted below,
detecting the error: "connect". Protocol specific error code(s): "79", "*",
4 ETW000                                                                              35 0.064772
4 ETW000 [dev trc     ,00000] &+      "*". SQLSTATE=08001
4 ETW000                                                                              35 0.064807
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              36 0.064843
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              36 0.064879
4 ETW000 [dev trc     ,00000] &+
4 ETW000                                                                              35 0.064914
4 ETW000 [dev trc     ,00000] *** ERROR in DB6Connect[dbdb6.c, 1634] (END)          29 0.064943
4 ETW000 [dbdb6.c     ,00000] *** ERROR => DbSlConnect to 'SM1' as 'sapsm1' failed
4 ETW000                                                                            4444 0.069387
2EETW169 no connect possible: "DBMS = DB6                              --- DB2DBDFT = 'SM1'"
regards,
Guna

MAXDB Dataabase system Copy - Fail on Phase ABAP Import - Index

Hi All
I wonder if somebody can shed some light on the below; we are doing a system copy of Production BW to QA BW; on ABAP import phase we get an error in the log SAPAPPL1.log (The Database being used is MAXDB)
ERROR : Execute for create index /BI0/E0FC_C06P on /BI0/E0FC_C06 failed (dbrc=99). (SQL error -7055) error message returned by DbSl: SQL-Statement: CREATE INDEX "/BI0/E0FC_C06P" ON "/BI0/E0FC_C06" ( "KEY_0FC_C06P" , "KEY_0FC_C06T" , "KEY_0FC_C06U" , "KEY_0FC_C061" , "KEY_0FC_C062" , "KEY_0FC_C063" , "KEY_0FC_C064" , "KEY_0FC_C065" )
I have checked in the releavant TSK file to see whether I can change the offending line from "err" to "ok", this does not help;
Second thing I tried to do was to drop the index using but keep on getting message that index does not exist
Any help would be apreciated, would I need to re-run the export
Kind Regards
Peter

> I wonder if somebody can shed some light on the below; we are doing a system copy of Production BW to QA BW; on ABAP import phase we get an error in the log SAPAPPL1.log (The Database being used is MAXDB)
>
> ERROR : Execute for create index /BI0/E0FC_C06P on /BI0/E0FC_C06 failed (dbrc=99). (SQL error -7055) error message returned by DbSl: SQL-Statement: CREATE INDEX "/BI0/E0FC_C06P" ON "/BI0/E0FC_C06" ( "KEY_0FC_C06P" , "KEY_0FC_C06T" , "KEY_0FC_C06U" , "KEY_0FC_C061" , "KEY_0FC_C062" , "KEY_0FC_C063" , "KEY_0FC_C064" , "KEY_0FC_C065" )
>
> I have checked in the releavant TSK file to see whether I can change the offending line from "err" to "ok", this does not help;
Did you execute the report SMIGR_CREATE_DDL on the source system and placed the resulting .SQL files in the ABAP/DB/ADA directory before starting the import?
Markus

ABAP Import didnt start well (DS_DBOBJECTUNKNOWN)

Hello All,
Iu00B4ve started an export/import and now the import stopped at begin of phase abap import.
The following error is an example but is shown in all import log files:
E:\usr\sap\T08\SYS\exe\nuc\NTAMD64\R3load.exe -i SAPUSER1.cmd -dbcodepage 1100 -l SAPUSER1.log -stop_on_error -loadprocedure fast LOAD:COMPRESS_ALL
(DB) INFO: connected to DB
(DB6) INFO: COMPRESS YES is set during table creation.
(DB6) DB2 9.5 automatic dictionary creation does not require an explicit REORG.
(DB6) Compression threshold is ignored.
(GSI) INFO: dbname   = "T08                                                                                "
(GSI) INFO: vname    = "DB6                             "
(GSI) INFO: hostname = "UNKNOWN                                                         "
(GSI) INFO: sysname = "Windows NT"
(GSI) INFO: nodename = "ZKEMT08"
(GSI) INFO: release = "5.2"
(GSI) INFO: version = "3790 Service Pack 2"
(GSI) INFO: machine = "4x AMD64 Level 6 (Mod 23 Step 6)"
(SQL) INFO: Trying to open F:\db_export\ABAP\DB/DB6/USER1.SQL
(SQL) INFO: F:\db_export\ABAP\DB/DB6/USER1.SQL opened
(DB6) INFO: executing DDL statements for object /ISIS/ZLRGTABINF from external SQL file.
(DB) ERROR: DDL statement failed
( CREATE TABLE "/ISIS/ZLRGTABINF"         ("TABSCHEMA" SAPDB6VARCHAR(000020)         DEFAULT ' ' NOT NULL,         "TABNAME" SAPDB6VARCHAR(000128)         DEFAULT ' ' NOT NULL,         "TBSPACE" SAPDB6VARCHAR(000030)         DEFAULT ' ' NOT NULL,         "INDEX_TBSPACE" SAPDB6VARCHAR(000030)         DEFAULT ' ' NOT NULL,         "LARGE_RIDS" SAPDB6FIXCHAR(000001)         DEFAULT ' ' NOT NULL,         "LARGE_SLOTS" SAPDB6FIXCHAR(000001)         DEFAULT ' ' NOT NULL,         "INPLACE_REORG" SAPDB6VARCHAR(000010)         DEFAULT ' ' NOT NULL,         "DATA_P_SZ" DECIMAL(000022,000000)         DEFAULT 0 NOT NULL,         "INDEX_P_SZ" DECIMAL(000022,000000)         DEFAULT 0 NOT NULL,         "JOBNUMBER" SAPDB6VARCHAR(000008)         DEFAULT ' ' NOT NULL)         IN "T08#USER1D"         INDEX IN "T08#USER1I"         LONG IN "T08#USER1D"       COMPRESS YES )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
Iu00B4ve changed the r3load to the newest version also checked freespace.
Regards
Olaf

Hello Hans-Juergen,
I found this in the file:
table storage parameters
loc: APPL0 P08#STABD                      P08#STABI                      P08#STABD
     APPL1 P08#BTABD                      P08#BTABI                      P08#BTABD
     APPL2 P08#POOLD                      P08#POOLI                      P08#POOLD
     CLUST P08#CLUD                       P08#CLUI                       P08#CLUD
     DDIM P08#DIMD                       P08#DIMI                       P08#DIMD
     DFACT P08#FACTD                      P08#FACTI                      P08#FACTD
     DODS P08#ODSD                       P08#ODSI                       P08#ODSD
     POOL P08#POOLD                      P08#POOLI                      P08#POOLD
     SDIC P08#DDICD                      P08#DDICI                      P08#DDICD
     SDOCU P08#DOCUD                      P08#DOCUI                      P08#DOCUD
     SLDEF P08#EL700D                     P08#EL700I                     P08#EL700D
     SLEXC P08#EL700D                     P08#EL700I                     P08#EL700D
     SLOAD P08#LOADD                      P08#LOADI                      P08#LOADD
     SPROT P08#PROTD                      P08#PROTI                      P08#PROTD
     SSDEF P08#ES700D                     P08#ES700I                     P08#ES700D
     SSEXC P08#ES700D                     P08#ES700I                     P08#ES700D
     SSRC P08#SOURCED                    P08#SOURCEI                    P08#SOURCED
     TEMP P08#PROTD                      P08#PROTI                      P08#PROTD
     USER P08#USER1D                     P08#USER1I                     P08#USER1D
     USER1 P08#USER1D                     P08#USER1I                     P08#USER1D
     YBMC P08#USER1D                     P08#USER1I                     P08#USER1D
     ZZ001 P08#USER1D                     P08#USER1I                     P08#USER1D
     ZZ002 P08#USER1D                     P08#USER1I                     P08#USER1D
     ZZ003 P08#USER1D                     P08#USER1I                     P08#USER1D
     ZZ004 P08#USER1D                     P08#USER1I                     P08#USER1D
     ZZ005 P08#USER1D                     P08#USER1I                     P08#USER1D
To addapt tablespace names for server consolidation
e.g. PSAPBTABD -> <SAPSID>#BTABD
Use the following parameter:
modify_tbs_names: 1
Regards
Olaf

Restart ABAP Import

I'm installing ERP 2005; the database instance. The ABAP import I have an error and I would like to start the ABAP import from the beginning.
Is this possible? Or do I need to start the DB instance again (I want to use the same SID)

Hi,
Ok, firstable if you have TSK.bck in the installation directory. It means that process for SAPAPPL1_1 has been terminated abnormally, if you re-start the R3SETUP the error occurs since R3SETUP finds the .bck (back up) file.
You can then:
1. delete (or move) SAPAPPL1_1.TSK.bck file from inst.dir.
2. re-generate new SAPAPPL1_1.TSK.bck using command:
R3load -ctf I SAPAPPL1_1.STR DDLORA.TPL SAPAPPL1_1.TSK.bck ORA
( please check the exact name and syntax, I am not quite sure)
After you have regenerated new .bck file, you can proceed as described in
note 455195. After that you will have a clear and consistent
state of TSK files and database.
You might also want to find why file SAPAPPL1_1.TSK was not created properly and solve the problem (Ctrl+C, power off or disk space?)
Thanks,
George
Re-start the import from scratch (recommended by SAP)

Stms import stuck main import phase

Hi expert,
I did export of production master data (sap_all profile) and moved TR to sandbox system. TR size 1GB.
Now I started TR import but it is still in main import phase showing in import monitor.
tp code -8888
main import
i checked BTC in sm51 which is showing 0 job.
Just checked in sm37 .. no job running.
i restart sap. (error prompt during gui login as "sap system message N" which is solve after restart sap)
Now after restart the sap I again check stms_import. TR showing truck icon and in import monitor it is showing same as main import phase running state.
How to check where import is going smoothly or it is stopped.
Kindly provide solution.

Hi pranay,
I restarted system (os level) after changed parameter.
Below are the last lines of log (trans/temp)
4 ETW000   1 entry from FAGLFLEX07 (999) deleted.
4 ETW000   1 entry for FAGLFLEX07 inserted (999*).
4 ETW675 end import of "R3TRTABUFAGLFLEX07".
3 ETW674Xstart import of "R3TRTABUFAGLFLEX08" ...
4 ETW000   1 entry from FAGLFLEX08 (999) deleted.
4 ETW000   1 entry for FAGLFLEX08 inserted (999*).
4 ETW675 end import of "R3TRTABUFAGLFLEX08".
3 ETW674Xstart import of "R3TRTABUFAGLFLEXA" ...
As you mention may be there will high volume data but since after 8 hrs wait.. it is still in same table (R3TRTABUFAGLFLEXA) with no error.
TR size is 1.9 GB
Will you suggest me how much time it will take as per size of TR.
regards,
Devendra

ECC 6.0 Installation error at ABAP Import Stage-- Phase 15 of 24

Dear all
I am trying to Install ECC 6.0 for our R&D Server and i have 240 GB HDD and 4 GB RAM. I have only one drive (C:\) and i know its a bad practice to install ECC on one drive but i have to do it. I cannot format it either.
The INstallation started and during ABAP Import stage ( it has 9 failed jobs), the installation gets stuck for almost 2 days. I try to install again but i get an error message which says:
Unable to start a service execution.
Please check the following information for the possibble reason and inform the installation development : showing dlg diProductChoice <dialog sid="diProductChoice"> <title>Welcome to SAP Installation Master</title>
<dialog/> Login in progress Connection request to guiengine backend by host 173.1.53.174 Protocol version is 3.1
Send connect information client logged on Waiting for an answer from GUI CDialogHandler: ACTION_NEXT requested <dialog sid="diProductChoice"> <dialog/> Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\x.
Removing file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\x. showing dlg diRestartOrCancel <dialog sid="diRestartOrCancel"> Dialog does not contain standard input handler, so the backend is not able to generate a log entry <dialog/>
Waiting for an answer from GUI current working directory is C:\Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x.
Running with toplevel file C:\Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/toplevel.xml Syslib info about system call. OS message 32 (The process cannot access the file because it is being used by another process. ) after execution of system call 'rename' with parameter (C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.log, C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.1.log), line (377) in file (syxxcnode.cpp).
Copying file C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.log to C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.1.log Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.log' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.1.log'. Account ERP6/Administrator has ADS path 'WinNT://ERP6/Administrator' Administrator has SID S-1-5-21-1984538376-659086811-895846994-500 existence check for user Administrator returned true. inserted account (Administrator, S-1-5-21-1984538376-659086811-895846994-500, USER) into the accountcache.
Security descriptor of C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.1.log set to O:BAG:S-1-5-21-1984538376-659086811-895846994-513D:AI(A;ID;0x1200a9;;;BU)(A;ID;0x1301bf;;;PU)(A;ID;FA;;;BA)(A;ID;FA;;;SY)(A;ID;0x1301bf;;;S-1-5-13) + PROTECTED_DACL_SECURITY_INFORMATION
Removing file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\sapinst_dev.log. Syslib info about system call. OS message 32 (The process cannot access the file because it is being used by another process. ) after execution of system call 'DeleteFile' with parameter (C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\sapinst_dev.log), line (202) in file (synxcfile.cpp).
Moving file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\sapinst_dev.log to: C:\sap28.tmp. System call failed. Error 32 (The process cannot access the file because it is being used by another process. ) in execution of system call 'MoveFileEx' with parameter (C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\sapinst_dev.log, C:\sap28.tmp, MOVEFILE_WRITE_THROUGH), line (223) in file (synxcfile.cpp).
Unable to delete node C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.log with type file: The process cannot access the file because it is being used by another process.
Removing file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\sapinst_dev.1.log. Unable to move or rename node C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.log with type file/directory to C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.1.log: The system cannot find the file specified. The execution will be terminated now.
can anyone please help? Thanks

Hello
I just checked SAPSSEXC.LOG file and this message was displayed
IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(RFF) ERROR: invalid checksum in data file "C:\SAP Dumps\51033500_1\EXP1\DATA\SAPSSEXC.001"
current table was "DYNPSOURCE"
(DB) INFO: ENHCOMPCHILDCOMP created
(DB) INFO: ENHCOMPCHILDCOMP~0 created
(IMP) INFO: import of ENHCOMPCHILDCOMP completed (16 rows) #20100318142338
I downloaded the files from Service Market Place. Does it mean that my files are corrput?

ABAP Import Phase DDL Statement Error

Similar Messages

Maybe you are looking for