ABAP IMPORT phase is slow in ECC 6.0 installation on Solaris 10
Hi gurus,
I installed ECC 6.0 on Solaris 10 operating system and Oracle 10.2.0.2. I installed all solaris patces and Oracle interim patches before the installation. Firstly I added only 2 parameters in /etc/system file. This parameters like this: "set shmsys:shminfo_shmmax=0xffffffffffffffff" ,"set rlim_fd_cur=8192". Then I started the installation. When the system check the parameters I have medium warning about set shmsys:shminfo_shmmax=0xffffffffffffffff .After that I didn't restart the solaris machine and recheck the parameters.After I removed this parameter I didn't have any warning and I started the installation. Everything was ok. I don't have any error about installation. The processes are continueing but now ABAP import is very very slow. Only 5 processes finished from 38 in ABAP IMPORT phase in 14 hours. Is it normal? Why this step is very slow? What can I do to increase this step? If I add "set shmsys:shminfo_shmmax=0xffffffffffffffff" again when processes is running, does this step accelerate? If I change the /etc/system parameters do I have to restart the solaris machine? What can I do to resolve this problem?
Best regards,
Hi Arif
<i>Only 5 processes finished from 38 in ABAP IMPORT phase in 14 hours. Is it normal?</i>
No, this is not normal. As far as i know, it is possible to set a parallel degree in sapinst. Of course this needs more hardware ressources. Did you do that?
To further diagnose your problem, you should check cpu and disk usage. It would be interesting which are the top processes running. Either your system is too slow, or some ressource is a bottleneck.
Regards
Michael
Similar Messages
-
Error in ABAP Import Phase - 3 jobs failed
Hi,
My installation of ECC IDES has failed in ABAP Import phase.
3 jobs has failed.
I figured out from the logs that there are 3 loads that has failed.
Failed loads are SAPPOOL, SAP0000 and SAPSLEXC.
The prominant error in them are as below. Please assist to relsove
these errors.
SAPPOOL.log
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT
NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN"
SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA )
IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293"
bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
SAP0000.log
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( CREATE TABLE "REPOLOAD" ( "PROGNAME" SAPDB6CHAR(40) DEFAULT ' ' NOT
NULL , "R3STATE" SAPDB6FIXCHAR(1) DEFAULT ' ' NOT NULL , "MACH"
SMALLINT DEFAULT 0 NOT NULL , "UNAM" SAPDB6CHAR(12) DEFAULT ' ' NOT
NULL , "UDAT" SAPDB6CHAR(8) DEFAULT '00000000' NOT NULL , "UTIME"
SAPDB6CHAR(6) DEFAULT '000000' NOT NULL , "L_DATALG" INTEGER DEFAULT 0
NOT NULL , "Q_DATALG" INTEGER DEFAULT 0 NOT NULL , "SDAT" SAPDB6CHAR(8)
DEFAULT '00000000' NOT NULL , "STIME" SAPDB6CHAR(6) DEFAULT '000000'
NOT NULL , "MINOR_VERS" SMALLINT DEFAULT 0 NOT NULL , "MAJOR_VERS"
INTEGER DEFAULT 0 NOT NULL , "LDATA" BLOB(1G)LOGGED , "QDATA" BLOB(1G)
LOGGED ) IN DGS#EL700D INDEX IN DGS#EL700I LONG IN DGS#EL700D )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
SAPSLEXC.log
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( CREATE TABLE "CO2MAP" ( "ID" INTEGER DEFAULT 0 NOT NULL , "SRCLINE"
INTEGER DEFAULT 0 NOT NULL , "PAGELINE" INTEGER DEFAULT 0 NOT
NULL , "IDINCL" INTEGER DEFAULT 0 NOT NULL , "SRCOFF" SMALLINT DEFAULT
0 NOT NULL , "PAGEOFF" SMALLINT DEFAULT 0 NOT NULL ) IN DGS#EL700D
INDEX IN DGS#EL700I LONG IN DGS#EL700D )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
Thanks and Regards,
Hussian Sehorewala
Edited by: Hussain Sehorewala on May 5, 2011 1:28 PMQ:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110504190648
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -ctf I Q:\1000082149\1\ABAP\DATA\SAPPOOL.STR C:\Program Files\sapinst_instdir\CRM70\LM\COPY\DB6\SYSTEM\CENTRAL\AS-ABAP\DDLDB6.TPL SAPPOOL.TSK DB6 -l SAPPOOL.log
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job completed
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110504190648
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110504190648
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) INFO: AANK created #20110504190649
(DB) INFO: AANK~0 created #20110504190649
(IMP) INFO: import of AANK completed (0 rows) #20110504190649
(DB) INFO: AANL created #20110504190649
(DB) INFO: AANL~0 created #20110504190649
(IMP) INFO: import of AANL completed (0 rows) #20110504190649
(DB) INFO: ATAB created #20110504190649
(DB) INFO: ATAB~0 created #20110504190649
(DB6) Using LOAD API for table ATAB
(IMP) INFO: import of ATAB completed (2719993 rows) #20110504190723
(DB) INFO: BPHIER created #20110504190723
(DB) INFO: BPHIER~0 created #20110504190723
(IMP) INFO: import of BPHIER completed (0 rows) #20110504190723
(DB) INFO: CFIS created #20110504190723
(DB) INFO: CFIS~0 created #20110504190723
(IMP) INFO: import of CFIS completed (0 rows) #20110504190723
(DB) INFO: CRVP created #20110504190723
(DB) INFO: CRVP~0 created #20110504190723
(IMP) INFO: import of CRVP completed (0 rows) #20110504190723
(DB) INFO: DEBI created #20110504190723
(DB) INFO: DEBI~0 created #20110504190723
(IMP) INFO: import of DEBI completed (0 rows) #20110504190723
(DB) INFO: DVPOOL created #20110504190723
(DB) INFO: DVPOOL~0 created #20110504190723
(IMP) INFO: import of DVPOOL completed (0 rows) #20110504190723
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110504190723
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505112616
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505112617
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505113814
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505113815
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505114629
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505114629
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20110505120819
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -k 1W1fd5M50Dh01eqteAQy1AA1 -l SAPPOOL.log -stop_on_error -loadprocedure fast LOAD
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
( DROP TABLE "DVPOOLTEXT" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed with SQL error
( CREATE TABLE "DVPOOLTEXT" ( "TABNAME" SAPDB6CHAR(10) DEFAULT ' ' NOT NULL , "VARKEY" SAPDB6CHAR(110) DEFAULT ' ' NOT NULL , "DATALN" SMALLINT DEFAULT 0 NOT NULL , "VARDATA" VARCHAR(16384) FOR BIT DATA ) IN DGS#POOLD INDEX IN DGS#POOLI LONG IN DGS#POOLD )
(SQL error -670)
error message returned by dsql:
SQL0670N The row length of the table exceeded a limit of "16293" bytes. (Table space "DGS#POOLD".) SQLSTATE=54010
(DB) INFO: disconnected from DB
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: job finished with 1 error(s)
Q:\usr\sap\DGS\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20110505120819 -
ABAP Import Phase error during Install
Hi out there. I am installing an ERP system ECC 6.0 SR3 with just the AS ABAP and ECC components. It is now on the ABAP import phase and returns the error that certain ABAP objects are failing out of the 112 objects that is processing. Current examples are : -
=============================================================================
Loading of 'SAPSDIC_2' import package: ERROR
(DB) ERROR: DDL statement failed
(CREATE INDEX "VRSX2~1" ON "VRSX2" ( "RELID" , "OBJNAME" , "VERSNO" ) )
DbSlExecute: rc = 99
(SQL error -602)
error message returned by DbSl:
=============================================================================
Loading of 'DD03L' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
Loading of 'SAPAPPL2_9' import package: ERROR
ERROR : Execute for create index SEOSUBCO~001 on SEOSUBCO failed (dbrc=99).
(SQL error -602)
error message returned by DbSl:
SQL-Statement: CREATE INDEX "SEOSUBCO~001" ON "SEOSUBCO" ( "CLSNAME" , "CMPNAME" , "SCOTYPE" )
=============================================================================
I wish to know how else can 1 work around this ABAP import phase with errors such as these? Is there a manual procedure I can perform for this phase during installations so to avoid these errors that come up. And then re-run the install that goes past this?
Any help will be greatly appreciated.
Thanks in advance.Hi
Try increasing your shared pool size
login to database level
sqlplus "/as sysdba"
>show parameter shared_pool_size;
if the value is some thing aroung 150 to 200 MB increase it to 250MB
>alter sytem set shared_pool_size=250M scope=both;
Hope this will solve your problem
Regards
Uday -
ABAP Import Phase DDL Statement Error
Hi Experts!
I am installing SAP Netweaver PI 7.3 EHP1 and encountered an error in the ABAP import phase.
I checked the import monitor logs and found a clue about SAPVIEW.log.
I have checked the SAPVIEW.log and found out the following:
ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG:
Please help!
Also please let me know if any further detail is required.
Regards,
AyanGaurav,
Please find the below pasted trace from SAPVIEW.log
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823014048
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -ctf I /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DATA/SAPVIEW.STR /tmp/sapinst_instdir/NW731/DB6/INSTALL/STD/AS/DDLDB6.TPL SAPVIEW.TSK DB6 -l SAPVIEW.log
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job completed
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823014048
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823014048
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) INFO: /BI0/MHIER_VERS created #20140823014054
(DB) INFO: /BI0/RALEAFNODCH created #20140823014054
(DB) INFO: /BI0/RALEAFNODSP created #20140823014054
(DB) INFO: /BI0/RBUCKET created #20140823014054
(DB) INFO: /BI0/RCALMONTH created #20140823014054
(DB) INFO: /BI0/RCALMONTH2 created #20140823014054
(DB) INFO: /BI0/RCALQUART1 created #20140823014054
(DB) INFO: /BI0/RCALQUARTER created #20140823014054
(DB) INFO: /BI0/RCALWEEK created #20140823014054
(DB) INFO: /BI0/RCALYEAR created #20140823014054
(DB) INFO: /BI0/RCHNGID created #20140823014054
(DB) INFO: /BI0/RCURRENCY created #20140823014054
(DB) INFO: /BI0/RDATE created #20140823014054
(DB) INFO: /BI0/RFISCPER created #20140823014054
(DB) INFO: /BI0/RFISCPER3 created #20140823014054
(DB) INFO: /BI0/RFISCVARNT created #20140823014054
(DB) INFO: /BI0/RFISCYEAR created #20140823014054
(DB) INFO: /BI0/RHALFYEAR1 created #20140823014054
(DB) INFO: /BI0/RHIENM created #20140823014054
(DB) INFO: /BI0/RHIER_HIEID created #20140823014054
(DB) INFO: /BI0/RHIER_NODE created #20140823014054
(DB) INFO: /BI0/RHIER_VERS created #20140823014054
(DB) INFO: /BI0/RINFOPROV created #20140823014054
(DB) INFO: /BI0/RIOBJNM created #20140823014054
(DB) INFO: /BI0/RLANGU created #20140823014054
(DB) INFO: /BI0/RLOGSYS created #20140823014054
(DB) INFO: /BI0/RNODEPOSIT created #20140823014054
(DB) INFO: /BI0/RNORESTNODE created #20140823014054
(DB) INFO: /BI0/RRATE_TYPE created #20140823014054
(DB) INFO: /BI0/RRECORDMODE created #20140823014054
(DB) INFO: /BI0/RRECORDTP created #20140823014054
(DB) INFO: /BI0/RREQUID created #20140823014054
(DB) INFO: /BI0/RSIGNCH created #20140823014054
(DB) INFO: /BI0/RSOURSYSTEM created #20140823014054
(DB) INFO: /BI0/RTIME created #20140823014054
(DB) INFO: /BI0/RTXTLG created #20140823014054
(DB) INFO: /BI0/RTXTMD created #20140823014054
(DB) INFO: /BI0/RTXTSH created #20140823014054
(DB) INFO: /BI0/RUNIT created #20140823014054
(DB) INFO: /BI0/RWEEKDAY1 created #20140823014054
(DB) INFO: /BI0/ZBUCKET created #20140823014054
(DB) INFO: /BI0/ZCALMONTH created #20140823014054
(DB) INFO: /BI0/ZCALMONTH2 created #20140823014054
(DB) INFO: /BI0/ZDATE created #20140823014054
(DB) INFO: /BI0/ZFISCPER created #20140823014055
(DB) INFO: /BI0/ZHALFYEAR1 created #20140823014055
(DB) INFO: /BI0/ZINFOPROV created #20140823014055
(DB) INFO: /BI0/ZIOBJNM created #20140823014055
(DB) INFO: /GC1/VXXX created #20140823014055
(DB) INFO: /OSP/V_RAUI_CHRD created #20140823014055
(DB) INFO: /OSP/V_RAUI_CMVD created #20140823014055
(DB) INFO: /OSP/V_RAUI_CPVD created #20140823014055
(DB) INFO: /OSP/V_RAUI_CSED created #20140823014055
(DB) INFO: /OSP/V_RAUI_DCDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_GRPD created #20140823014055
(DB) INFO: /OSP/V_RAUI_MTD created #20140823014055
(DB) INFO: /OSP/V_RAUI_MVDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_PBDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_RDDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_RFCD created #20140823014055
(DB) INFO: /OSP/V_RAUI_RMTD created #20140823014055
(DB) INFO: /OSP/V_RAUI_RTDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_SCD created #20140823014055
(DB) INFO: /OSP/V_RAUI_SCHD created #20140823014055
(DB) INFO: /OSP/V_RAUI_SELD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TMVD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TPBD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TPDB created #20140823014055
(DB) INFO: /OSP/V_RAUI_TPRD created #20140823014055
(DB) INFO: /OSP/V_RAUI_TRGD created #20140823014055
(DB) INFO: /OSP/V_RAUI_VARD created #20140823014055
(DB) INFO: /SAPAPO/GEWICHT created #20140823014055
(DB) INFO: /SAPAPO/TRENDAM created #20140823014055
(DB) INFO: /SAPAPO/VWALPROF created #20140823014055
(DB) INFO: /SAPPO/FULL_HINT created #20140823014055
(DB) INFO: /SAPPO/V_PPOCMPL created #20140823014055
(DB) INFO: /SAPPO/V_PPO_UPD created #20140823014055
(DB) INFO: /SAPTRX/A_CONDF4 created #20140823014055
(DB) INFO: /SAPTRX/EE_FLDS created #20140823014055
(DB) INFO: /SAPTRX/MSG_PARA created #20140823014055
(DB) INFO: /SAPTRX/MSG_PTAB created #20140823014055
(DB) INFO: /SAPTRX/STR_FLDS created #20140823014055
(DB) INFO: /SAPTRX/VDASFEV created #20140823014055
(DB) INFO: /SAPTRX/VDASFPAR created #20140823014055
(DB) INFO: /SAPTRX/VD_AOMIL created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAC created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAE created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAI created #20140823014055
(DB) INFO: /SAPTRX/VD_AOPAR created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTD1 created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTD2 created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTDD created #20140823014055
(DB) INFO: /SAPTRX/VD_AOTYP created #20140823014055
(DB) INFO: /SAPTRX/VD_ASPAR created #20140823014055
(DB) INFO: /SAPTRX/VD_CONDL created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD1 created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD2 created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD3 created #20140823014055
(DB) INFO: /SAPTRX/VD_EVTD4 created #20140823014055
(DB) INFO: /SAPTRX/V_AODD02 created #20140823014055
(DB) INFO: /SAPTRX/V_DD03 created #20140823014055
(DB) INFO: /SAPTRX/V_DD03X created #20140823014055
(DB) INFO: /SDF/CMO_OBJ_TR created #20140823014055
(DB) INFO: /SDF/CMO_SMDCMP created #20140823014056
(DB) INFO: /SDF/CMO_SMDDVC created #20140823014056
(DB) INFO: /SDF/CMO_UMDCMP created #20140823014056
(DB) INFO: /SDF/SMODICOMP created #20140823014056
(DB) INFO: /SDF/SMODIDEVC created #20140823014056
(DB) INFO: /SDF/UMOD_COMP created #20140823014056
(DB) INFO: AKB_TRHD_DETAIL created #20140823014056
(DB) INFO: ALTEXTHIST created #20140823014056
(DB) INFO: APPL_DEVC created #20140823014056
(DB) INFO: APPL_DIAL created #20140823014056
(DB) INFO: APPL_DOMA created #20140823014056
(DB) INFO: APPL_DTEL created #20140823014056
(DB) INFO: APPL_ENQU created #20140823014056
(DB) INFO: APPL_FUGR created #20140823014056
(DB) INFO: APPL_FUGRG created #20140823014056
(DB) INFO: APPL_FUNC created #20140823014056
(DB) INFO: APPL_INDX created #20140823014056
(DB) INFO: APPL_MCOB created #20140823014056
(DB) INFO: APPL_MENU created #20140823014056
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823014056
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823014312
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823014318
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140823015246
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140823015250
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: START OF LOG: 20140825011924
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: sccsid @(#) $Id: //bas/721_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: version R7.20/V1.6 [UNICODE]
Compiled Dec 4 2013 12:54:08
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load -i SAPVIEW.cmd -dbcodepage 4102 -l SAPVIEW.log -stop_on_error -loadprocedure fast LOAD:DEF_CRT
(DB) INFO: connected to DB
(SQL) INFO: Searching for SQL file SQLFiles.LST
(SQL) INFO: SQLFiles.LST not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/SQLFiles.LST not found
(SQL) INFO: Searching for SQL file .SQL
(SQL) INFO: .SQL not found
(SQL) INFO: Searching for SQL file /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL
(SQL) INFO: /backup/NW7.3_EHP1/ABAP_Inst_EXP/51043228/DATA_UNITS/EXP3/DB/DB6/.SQL not found
(DB) ERROR: DDL statement failed
( DROP VIEW "APPL_MODS" )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
( CREATE VIEW "APPL_MODS" ( "NAME", "TYP", "MEMBER", "DEVCLASS" ) AS SELECT T0001."NAME", T0001."TYP", T0001."MEMBER", T0002."DEVCLASS" FROM "MODSAP" T0001, "MODSAPA" T0002 WHERE T0001."NAME" = T0002."NAME" AND T0002."MIGRATED" <> 'X' )
dsql_exec_immediate returned DS_DBOBJECTUNKNOWN
(DB) INFO: disconnected from DB
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/PID/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140825011937
Please look into this..
Regards,
Ayan -
SAP Ecc6.0 Installation error during ABAP Import Phase 20 of 24
While I am installing SAP ECC 6.0 with Original DVD. I am getting some Issues.
I had finished upto 4 stpes . and after that IMPORT ABAP, showing error in " Log files are written to C: Program files:sapinst......"
Please Retry , View Log & Stop.
I am clicking Retry again it will be come same issue. Please Let me know.
Log Files Name - "ABAP Processors of Instances SID\DVEMGS00"Still I am getting same problem in mine SAP ECC6.0 Installation.
In Abap Instance Phase 20 of 24. Error in ABAP Instance. I check the mmc.
Disp+work is in Gray Color. Remainiing Server Green Color. After Few minutes it will stopped in Work Process.
Still Going Installation for same Process.
Let me know. -
Error in ABAP Import Phase: Solution Req. Immediately
Hello,
I am installing Nerweaver 2004s SR2 in my Desktop, I got following error in middle.
OS:windows 2003 server
DB: Oracle 10g
SAP: Netweaver 2004s SR2
Error Phase: 19 ( ABAP Import )
Error log details in r3load.exe.log
*sapparam: sapargv( argc, argv) has not been called.*
*sapparam(1c): No Profile used.*
*sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090812095644*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]*
*Compiled Sep 1 2006 00:38:35*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe -testconnect*
*DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541*
*DbSl Trace: CONNECT failed with sql error '12541'*
*DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541*
*DbSl Trace: CONNECT failed with sql error '12541'*
*(DB) ERROR: db_connect rc = 256*
*DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541*
*DbSl Trace: CONNECT failed with sql error '12541'*
*DbSl Trace: OCI-call 'OCIServerAttach' failed: rc = 12541*
*DbSl Trace: CONNECT failed with sql error '12541'*
*(DB) ERROR: DbSlErrorMsg rc = 99*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)*
*D:\usr\sap\PRD\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090812095648*Hi Sanjeev,
Check if the listner is running.
Note 609332 - Composite note: ORA-12541/ORA-12224
1182782
Regards
Ashok Dalai -
Install IDES ECC6- Abap Import phase error
Hi all,
I have seen many post on this error but I have not still understood why it happens.
I have tried to install an IDES ECC6 on Windows 2003S 32 bit with 4gb of RAM on a VMWARE virtual machine.
I have done all the preparation steps:
1) adjust network performance
2) set virtual memory as the installed RAM + 8GB
3) set the HOSTS file with the IP address
4) installed Java SDK with JAVA_HOME environment variable
I have installed Oracle (delivered with the kit) and the patch and then started the SAPINST (under I386).
In the APAB Import phase all the tasks (1 from 19) are stopped since Oracle is no more available.
All the posts suggest to enlarge the shared_pool_size.
But why this happens ?
The install procedure should work without any Oracle parameter modification.
Any idea ?
Thank
AndreaHi
Try increasing your shared pool size
login to database level
sqlplus "/as sysdba"
>show parameter shared_pool_size;
if the value is some thing aroung 150 to 200 MB increase it to 250MB
>alter sytem set shared_pool_size=250M scope=both;
Hope this will solve your problem
Regards
Uday -
Installation ABAP import phase problem
Dear Friends,
I am installing ABAP application server within Netweaver 7.02 which has been downloaded from this site on my LAPTOP.
Phases 1 -15 took about 2 hrs to install.
After that it entered Phase 16 i.e Import ABAP and it has gone on for more that 12 hrs.
Of the 37 processes in this phase the last 2 doesn't complete. One is shown as running and other is waiting.
My Laptop has around 320GB HDD(100 GB free) 4 GB RAM of which only 3GB is usable as it as 32 bit OS,2.4 GHZ Core 2 Duo
processor and Windows Vista.
I think it is abnormal to continue for so long.
It does not show any error message nor any problem in the log.
What is the problem?
Pls advise.
Thamk for your efforts.Hi Sunny,
"Speed of this phase depends on number of things:
1) How many number of parallel jobs you have selected in sapinst ?
2) 4 GB of RAM is not much. So, it will take time."
1)How do I check the number of parallel jobs?
I think only one job is running because in the taskbar for the Installer it shows:
Import job Monitor: Running 1, Waiting 1, Failed 0, Completed 35, Total 37
The phase is Import ABAP and it has several jobs i.e threads of which only one is running.
2) Of the 4 Gb RAM only 3 GB is usable by Windows as it is 32 bit.Now of this Memory utilization is 65- 70%.
CPU utilization is 10-15%.
Since resource utilization is very less it is taking enormous amount of time.
As per documentation installation on a Laptop should not take more than 8 hrs but it has taken double the time i.e 16 hrs.
How much more time will it take?
Is there any way to speed it up ?
Thanks. -
ECC 6.0 Installation error at ABAP Import Stage-- Phase 15 of 24
Dear all
I am trying to Install ECC 6.0 for our R&D Server and i have 240 GB HDD and 4 GB RAM. I have only one drive (C:\) and i know its a bad practice to install ECC on one drive but i have to do it. I cannot format it either.
The INstallation started and during ABAP Import stage ( it has 9 failed jobs), the installation gets stuck for almost 2 days. I try to install again but i get an error message which says:
Unable to start a service execution.
Please check the following information for the possibble reason and inform the installation development : showing dlg diProductChoice <dialog sid="diProductChoice"> <title>Welcome to SAP Installation Master</title>
<dialog/> Login in progress Connection request to guiengine backend by host 173.1.53.174 Protocol version is 3.1
Send connect information client logged on Waiting for an answer from GUI CDialogHandler: ACTION_NEXT requested <dialog sid="diProductChoice"> <dialog/> Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\x.
Removing file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\x. showing dlg diRestartOrCancel <dialog sid="diRestartOrCancel"> Dialog does not contain standard input handler, so the backend is not able to generate a log entry <dialog/>
Waiting for an answer from GUI current working directory is C:\Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x.
Running with toplevel file C:\Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/toplevel.xml Syslib info about system call. OS message 32 (The process cannot access the file because it is being used by another process. ) after execution of system call 'rename' with parameter (C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.log, C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.1.log), line (377) in file (syxxcnode.cpp).
Copying file C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.log to C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.1.log Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.log' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.1.log'. Account ERP6/Administrator has ADS path 'WinNT://ERP6/Administrator' Administrator has SID S-1-5-21-1984538376-659086811-895846994-500 existence check for user Administrator returned true. inserted account (Administrator, S-1-5-21-1984538376-659086811-895846994-500, USER) into the accountcache.
Security descriptor of C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.1.log set to O:BAG:S-1-5-21-1984538376-659086811-895846994-513D:AI(A;ID;0x1200a9;;;BU)(A;ID;0x1301bf;;;PU)(A;ID;FA;;;BA)(A;ID;FA;;;SY)(A;ID;0x1301bf;;;S-1-5-13) + PROTECTED_DACL_SECURITY_INFORMATION
Removing file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\sapinst_dev.log. Syslib info about system call. OS message 32 (The process cannot access the file because it is being used by another process. ) after execution of system call 'DeleteFile' with parameter (C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\sapinst_dev.log), line (202) in file (synxcfile.cpp).
Moving file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\sapinst_dev.log to: C:\sap28.tmp. System call failed. Error 32 (The process cannot access the file because it is being used by another process. ) in execution of system call 'MoveFileEx' with parameter (C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\sapinst_dev.log, C:\sap28.tmp, MOVEFILE_WRITE_THROUGH), line (223) in file (synxcfile.cpp).
Unable to delete node C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.log with type file: The process cannot access the file because it is being used by another process.
Removing file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\sapinst_dev.1.log. Unable to move or rename node C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.log with type file/directory to C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/sapinst_dev.1.log: The system cannot find the file specified. The execution will be terminated now.
can anyone please help? ThanksHello
I just checked SAPSSEXC.LOG file and this message was displayed
IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(RFF) ERROR: invalid checksum in data file "C:\SAP Dumps\51033500_1\EXP1\DATA\SAPSSEXC.001"
current table was "DYNPSOURCE"
(DB) INFO: ENHCOMPCHILDCOMP created
(DB) INFO: ENHCOMPCHILDCOMP~0 created
(IMP) INFO: import of ENHCOMPCHILDCOMP completed (16 rows) #20100318142338
I downloaded the files from Service Market Place. Does it mean that my files are corrput? -
MAXDB Dataabase system Copy - Fail on Phase ABAP Import - Index
Hi All
I wonder if somebody can shed some light on the below; we are doing a system copy of Production BW to QA BW; on ABAP import phase we get an error in the log SAPAPPL1.log (The Database being used is MAXDB)
ERROR : Execute for create index /BI0/E0FC_C06P on /BI0/E0FC_C06 failed (dbrc=99). (SQL error -7055) error message returned by DbSl: SQL-Statement: CREATE INDEX "/BI0/E0FC_C06P" ON "/BI0/E0FC_C06" ( "KEY_0FC_C06P" , "KEY_0FC_C06T" , "KEY_0FC_C06U" , "KEY_0FC_C061" , "KEY_0FC_C062" , "KEY_0FC_C063" , "KEY_0FC_C064" , "KEY_0FC_C065" )
I have checked in the releavant TSK file to see whether I can change the offending line from "err" to "ok", this does not help;
Second thing I tried to do was to drop the index using but keep on getting message that index does not exist
Any help would be apreciated, would I need to re-run the export
Kind Regards
Peter> I wonder if somebody can shed some light on the below; we are doing a system copy of Production BW to QA BW; on ABAP import phase we get an error in the log SAPAPPL1.log (The Database being used is MAXDB)
>
> ERROR : Execute for create index /BI0/E0FC_C06P on /BI0/E0FC_C06 failed (dbrc=99). (SQL error -7055) error message returned by DbSl: SQL-Statement: CREATE INDEX "/BI0/E0FC_C06P" ON "/BI0/E0FC_C06" ( "KEY_0FC_C06P" , "KEY_0FC_C06T" , "KEY_0FC_C06U" , "KEY_0FC_C061" , "KEY_0FC_C062" , "KEY_0FC_C063" , "KEY_0FC_C064" , "KEY_0FC_C065" )
>
> I have checked in the releavant TSK file to see whether I can change the offending line from "err" to "ok", this does not help;
Did you execute the report SMIGR_CREATE_DDL on the source system and placed the resulting .SQL files in the ABAP/DB/ADA directory before starting the import?
Markus -
ABAP Import Error on Solution Manager Installation
Dear Guru's,
I'm installing solution manager 7.0 SR4 on AIX 5.3 with DB2 9.5, in the ABAP Import phase its throwing error message.
Error Message
WARNING 2010-04-27 11:29:41.914
Execution of the command "/usr/sap/SM1/SYS/exe/run/R3load -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
/usr/sap/SM1/SYS/exe/run/R3load: START OF LOG: 20100427112940
WARNING[E] 2010-04-27 11:29:41.917
CJS-30023 Process call '/usr/sap/SM1/SYS/exe/run/R3load -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'SM1' as 'sapsm1' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR 2010-04-27 11:29:42.429
FCO-00011 The step testDatabaseConnection with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
Kindly suggest me a solution for the above issue.
regards,
GunaHi,
As per your request, trans.log has been pasted below,
detecting the error: "connect". Protocol specific error code(s): "79", "*",
4 ETW000 35 0.064772
4 ETW000 [dev trc ,00000] &+ "*". SQLSTATE=08001
4 ETW000 35 0.064807
4 ETW000 [dev trc ,00000] &+
4 ETW000 36 0.064843
4 ETW000 [dev trc ,00000] &+
4 ETW000 36 0.064879
4 ETW000 [dev trc ,00000] &+
4 ETW000 35 0.064914
4 ETW000 [dev trc ,00000] *** ERROR in DB6Connect[dbdb6.c, 1634] (END) 29 0.064943
4 ETW000 [dbdb6.c ,00000] *** ERROR => DbSlConnect to 'SM1' as 'sapsm1' failed
4 ETW000 4444 0.069387
2EETW169 no connect possible: "DBMS = DB6 --- DB2DBDFT = 'SM1'"
regards,
Guna -
ECC 6.0 Installation Error During Import ABAP
Hello Guys,
I am installing the Ecc 6.0 on windows 2003 Enterprise Edition
I facing the following error during the installation. can you guys please help me out. here is the erro i am getting. I am here by posting the import.monitor.log and the related log file also. PLease help me out...
Import.Monitor.log file output
INFO: 2008-09-26 09:05:37
Data codepage 4103 is determined using TOC file 'D:\51032413_1\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
TRACE: 2008-09-26 09:05:37 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is started.
TRACE: 2008-09-26 09:05:37 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPVIEW' import package into database:
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
ERROR: 2008-09-26 09:05:44 com.sap.inst.migmon.LoadTask run
Loading of 'SAPVIEW' import package is interrupted with R3load error.
Process 'D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error' exited with return code 2.
For mode details see 'SAPVIEW.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-09-26 09:06:07
All import packages are processed.
WARNING: 2008-09-26 09:06:07
1 error(s) during processing of packages.
INFO: 2008-09-26 09:06:07
Import Monitor is stopped.
SAPVIEW.log file output
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080926002508
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 UNICODE
Compiled Sep 1 2006 00:38:35
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe -ctf I D:\51032413_1\EXP1\DATA\SAPVIEW.STR C:\Program Files\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\DDLORA.TPL SAPVIEW.TSK ORA -l SAPVIEW.log
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: job completed
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080926002510
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080926002510
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 UNICODE
Compiled Sep 1 2006 00:38:35
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) INFO: /1CN/APASAP00001 created #20080926002517
(DB) INFO: /1CN/APNSAP00001 created #20080926002517
(DB) INFO: /1CN/APTSAP00001 created #20080926002517
(DB) INFO: /1CN/APTSAP00004 created #20080926002517
(DB) INFO: /1CN/APTSAP00005 created #20080926002517
(DB) INFO: /1CN/APTSAP00006 created #20080926002517
(DB) INFO: /1CN/ARMSAP_CARR created #20080926002517
(DB) INFO: /1CN/ARMSAP_CONN created #20080926002517
(DB) INFO: /1CN/ATXSAPD0001 created #20080926002517
(DB) INFO: /1CN/ATXSAPD0002 created #20080926002517
(DB) INFO: /1CN/ATXSAPD0003 created #20080926002517
(DB) INFO: /1CN/ATXSAPD0004 created #20080926002517
(DB) INFO: /1CN/ATXSAPD0201 created #20080926002517
(DB) INFO: /1CN/ATXSAPR0100 created #20080926002517
(DB) INFO: /1CN/ATXSAPR0103 created #20080926002517
(DB) INFO: /1CN/ATXSAPR0104 created #20080926002517
(DB) INFO: /1CN/ATXSAPR0105 created #20080926002517
(DB) INFO: /1CN/ATXSAPR0106 created #20080926002517
(DB) INFO: /1CN/ATXSAPR0107 created #20080926002517
(DB) INFO: /1CN/ATXSAPR0108 created #20080926002518
(DB) INFO: /1CN/ATXSAPR0110 created #20080926002518
(DB) INFO: /1CN/ATXSAPR0111 created #20080926002518
(DB) INFO: /1CN/ATXSAPR0112 created #20080926002518
(DB) INFO: /1CN/ATXSAPR0113 created #20080926002518
(DB) INFO: /1CN/ATXSAPR0120 created #20080926002518
(DB) INFO: /1CN/ATXSAPR0130 created #20080926002518
(DB) INFO: /1CN/ATXSAPR0131 created #20080926002518
(DB) INFO: /1CN/ATXSAPR0140 created #20080926002518
(DB) INFO: /1CN/ATXSAPR0201 created #20080926002518
(DB) INFO: /1CN/ATXSAPRBR01 created #20080926002518
(DB) INFO: /1CN/ATXSAPRBR02 created #20080926002518
(DB) INFO: /1CN/ATXSAPRBR03 created #20080926002518
(DB) INFO: /1CN/ATXSAPRBR10 created #20080926002518
(DB) INFO: /1CN/ATXSAPRBR11 created #20080926002518
(DB) INFO: /1CN/ATXSAPRBR12 created #20080926002518
(DB) INFO: /1CN/ATXSAPRBR20 created #20080926002518
(DB) INFO: /1CN/ATXSAPRBR21 created #20080926002518
(DB) INFO: /1CN/ATXSAPRIN03 created #20080926002518
(DB) INFO: /1CN/ATXSAPRIN04 created #20080926002518
(DB) INFO: /1CN/ATXSAPRIN06 created #20080926002518
(DB) INFO: /1CN/ATXSAPRIN07 created #20080926002518
(DB) INFO: /1CN/ATXSAPS0100 created #20080926002518
(DB) INFO: /1CN/ATXSAPS0101 created #20080926002518
(DB) INFO: /1CN/ATXSAPS0102 created #20080926002518
(DB) INFO: /1CN/ATXSAPW0201 created #20080926002518
(DB) INFO: /1CN/ATXSAPW0202 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0100 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0101 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0102 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0103 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0104 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0105 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0106 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0140 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0141 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0146 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0147 created #20080926002518
(DB) INFO: /1CN/ATXSAPX0148 created #20080926002518
(DB) INFO: /1CN/ATXSAPXBR01 created #20080926002519
(DB) INFO: /1CN/ATXSAPXBR02 created #20080926002519
(DB) INFO: /1CN/ATXSAPXBR03 created #20080926002519
(DB) INFO: /1CN/ATXSAPXBR11 created #20080926002519
(DB) INFO: /1SAP1/CNV_A0012 created #20080926002519
(DB) INFO: /1SAP1/CNV_A0017 created #20080926002519
(DB) INFO: /1SAP1/CNV_A0018 created #20080926002519
(DB) INFO: /1SAP1/CNV_A0020 created #20080926002519
(DB) INFO: /1SAP1/CNV_A0026 created #20080926002519
(DB) INFO: /1SAP1/CNV_A0029 created #20080926002520
(DB) INFO: /1SAP1/CNV_A0032 created #20080926002520
(DB) INFO: /1SAP1/CNV_A0033 created #20080926002520
(DB) INFO: /1SAP1/CNV_A0034 created #20080926002520
(DB) INFO: /1SAP1/CNV_A0036 created #20080926002520
(DB) INFO: /1SAP1/CNV_A0037 created #20080926002520
(DB) INFO: /1SAP1/CNV_A0042 created #20080926002520
(DB) INFO: /1SAP1/CNV_A0048 created #20080926002520
(DB) INFO: /1SAP1/CNV_A0049 created #20080926002520
(DB) INFO: /1SAP1/CNV_A0050 created #20080926002520
(DB) ERROR: DDL statement failed
(CREATE VIEW "/1SAP1/CNV_A0051" ( "MANDT" , "AUART" , "TDOBJECT" , "TDNAME" , "TDID" ) AS SELECT T0001."MANDT", T0001."AUART", T0001."TDOBJECT", T0001."TDNAME", T0001."TDID" FROM "T350" T0001)
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080926002520
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080926071241
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 UNICODE
Compiled Sep 1 2006 00:38:35
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) ERROR: DDL statement failed
(DROP VIEW "/1SAP1/CNV_A0051")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "/1SAP1/CNV_A0051" ( "MANDT" , "AUART" , "TDOBJECT" , "TDNAME" , "TDID" ) AS SELECT T0001."MANDT", T0001."AUART", T0001."TDOBJECT", T0001."TDNAME", T0001."TDID" FROM "T350" T0001)
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080926071252
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080926082712
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 UNICODE
Compiled Sep 1 2006 00:38:35
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) ERROR: DDL statement failed
(DROP VIEW "/1SAP1/CNV_A0051")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "/1SAP1/CNV_A0051" ( "MANDT" , "AUART" , "TDOBJECT" , "TDNAME" , "TDID" ) AS SELECT T0001."MANDT", T0001."AUART", T0001."TDOBJECT", T0001."TDNAME", T0001."TDID" FROM "T350" T0001)
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080926082718
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080926085744
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 UNICODE
Compiled Sep 1 2006 00:38:35
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) ERROR: DDL statement failed
(DROP VIEW "/1SAP1/CNV_A0051")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "/1SAP1/CNV_A0051" ( "MANDT" , "AUART" , "TDOBJECT" , "TDNAME" , "TDID" ) AS SELECT T0001."MANDT", T0001."AUART", T0001."TDOBJECT", T0001."TDNAME", T0001."TDID" FROM "T350" T0001)
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080926085751
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20080926090537
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#8 $ SAP
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 UNICODE
Compiled Sep 1 2006 00:38:35
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -stop_on_error
DbSl Trace: ORA-1403 when accessing table SAPUSER
(DB) INFO: connected to DB
(DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): UTF8
(DB) ERROR: DDL statement failed
(DROP VIEW "/1SAP1/CNV_A0051")
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(IMP) INFO: a failed DROP attempt is not necessarily a problem
(DB) ERROR: DDL statement failed
(CREATE VIEW "/1SAP1/CNV_A0051" ( "MANDT" , "AUART" , "TDOBJECT" , "TDNAME" , "TDID" ) AS SELECT T0001."MANDT", T0001."AUART", T0001."TDOBJECT", T0001."TDNAME", T0001."TDID" FROM "T350" T0001)
DbSlExecute: rc = 103
(SQL error 942)
error message returned by DbSl:
ORA-00942: table or view does not exist
(DB) INFO: disconnected from DB
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
D:\usr\sap\ECC\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20080926090544
Kindly Help me out with this......Hi Ashok,
Now already cheecked the Oracle. The oracle instance is Up and running. Even i happened to increase the Shared pool and SGA memory size. I think this is some where the table was not created during the installation. Because the the installation was aborted a lot of times during the abap import process.
Please let me know if there are any other solution...where we can look into the DB is the table is created or not or any other..
Kindly help me ... -
IDES ECC 6.0 Installation failed at IMPORT ABAP -- Urgent pls....
Hi Gurus,
ecc6 installation failed at IMPORT ABAP step (to be precise - 16th step out of 19 steps) while importing 'SAPSSEXC' package .....
snippets of following logs are below
1> IMPORT_MONITOR.LOG
2> SAPINST.LOG
3> SAPSSEXC.LOG
<h2>IMPORT_MONITOR.LOG</h2>
ERROR: 2008-01-08 01:32:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process 'C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l
SAPSSEXC.log -loadprocedure fast' exited with return code -1,073,741,819.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-01-08 02:42:03 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is successfully completed.
WARNING: 2008-01-08 02:42:17
Cannot start import of packages with views because not all import packages with tables are loaded
successfully.
WARNING: 2008-01-08 02:42:17
1 error(s) during processing of packages.
INFO: 2008-01-08 02:42:17
Import Monitor is stopped.
<h2>SAPINST.LOG</h2>
WARNING 2008-01-08 02:42:21
Execution of the command "C:\j2sdk1.4.2_16-x64\bin\java.exe -classpath migmon.jar -showversion
com.sap.inst.migmon.imp.ImportMonitor -dbType MSS -importDirs
F:\ECC6\InstExport1\EXP1;F:\ECC6\InstExport2\EXP2;F:\ECC6\InstExport3\EXP3;F:\ECC6\InstExp4\EXP4;F:
\ECC6\InstExport5\EXP5;F:\ECC6\InstExport6\EXP6;F:\ECC6\InstExport6\EXP7;F:\ECC6\InstExport6\EXP8;F
:\ECC6\InstExport6\EXP9;F:\ECC6\InstExport6\EXP10;F:\ECC6\InstExport6\EXP11 -installDir
C:\PROGRA1\SAPINS1\ERP\SYSTEM\MSS\CENTRAL\AS -orderBy "" -r3loadExe
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -tskFiles yes -extFiles no -dbCodepage 4103 -jobNum 3
-monitorTimeout 30 -loadArgs " -loadprocedure fast" -trace all -sapinst" finished with return code
103. Output:
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 16, failed 1, total 19.
Loading of 'SAPAPPL2' import package: OK
Import Monitor jobs: running 0, waiting 1, completed 17, failed 1, total 19.
ERROR 2008-01-08 02:42:23
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s)
import_monitor.java.log, import_monitor.log.
ERROR 2008-01-08 02:42:24
FCO-00011 The step runMigrationMonitor with step key
|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|in
d|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigratio
nMonitor was executed with status ERROR .
<h2>SAPSSEXC.LOG</h2>
(DB) INFO: D301T~A created
(DB) INFO: D345T created
(DB) INFO: D345T~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of D345T completed (6585 rows) #20080107180224
(DB) INFO: DSYST created
(DB) INFO: DSYST~0 created
(IMP) INFO: import of DSYST completed (54353 rows) #20080107194721
(DB) INFO: DYNPSOURCE created
(DB) INFO: DYNPSOURCE~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of DYNPSOURCE completed (190478 rows) #20080107205002
(DB) INFO: ENHSPOTCONTRACT~1 created
(DB) INFO: ENHSPOTHEADER created
(DB) INFO: ENHSPOTHEADER~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: import of ENHSPOTHEADER completed (4078 rows) #20080107205109
(DB) INFO: INDTEXT created
(DB) INFO: INDTEXT~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(DB) INFO: PERMISSION created
(DB) INFO: PERMISSION~0 created
(IMP) INFO: import of PERMISSION completed (112356 rows) #20080107214109
(DB) INFO: PERMISSION~IF created
(DB) INFO: REPOSRC created
(DB) INFO: REPOSRC~0 created
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
(IMP) INFO: InitFastLoad failed with <3: Can't fastload LOBs>
(IMP) INFO: DBSL will be used
ANY POINTERS WILL BE HIGHLY APPRECIATED
THANKS IN ADVANCEno...loading was not finished....it aborted with 'Retry', 'View Log', & Stop options...i retried with no luck...
this is 'Central system ' installation btw....
it failed with below error
ERROR 2008-01-08 02:42:23
CJS-30022 Program 'Migration Monitor' exits with error code 103. For details see log file(s) import_monitor.java.log, import_monitor.log.
<h2>IMPORT_MONITOR.LOG</h2>
INFO: 2008-01-07 16:33:26
Import Monitor is started.
CONFIG: 2008-01-07 16:33:26
Application options:
dbCodepage=4103
dbType=MSS
extFiles=no
importDirs=F:\ECC6\InstExport1\EXP1;F:\ECC6\InstExport2\EXP2;F:\ECC6\InstExport3\EXP3;F:\ECC6\InstExp4\EXP4;F:\ECC6\InstExport5\EXP5;F:\ECC6\InstExport6\EXP6;F:\ECC6\InstExport6\EXP7;F:\ECC6\InstExport6\EXP8;F:\ECC6\InstExport6\EXP9;F:\ECC6\InstExport6\EXP10;F:\ECC6\InstExport6\EXP11
installDir=C:\PROGRA1\SAPINS1\ERP\SYSTEM\MSS\CENTRAL\AS
jobNum=3
loadArgs= -loadprocedure fast
monitorTimeout=30
orderBy=
r3loadExe=C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe
sapinst=
trace=all
tskFiles=yes
CONFIG: 2008-01-07 16:33:26
List of packages with table structure: 'SAP0000'.
CONFIG: 2008-01-07 16:33:26
List of packages with views: 'SAPVIEW'.
TRACE: 2008-01-07 16:33:26 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\PROGRA1\SAPINS1\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL' template file is started.
INFO: 2008-01-07 16:33:26 com.sap.inst.migmon.imp.ImportStandardTask preCreate
Parse of 'C:\PROGRA1\SAPINS1\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL' template file is successfully completed.
Primary key creation: before load.
Index creation: after load.
INFO: 2008-01-07 16:33:26
Data codepage 4103 is determined using TOC file 'F:\ECC6\InstExport1\EXP1\DATA\SAPAPPL0.TOC' for package 'SAPAPPL0'.
TRACE: 2008-01-07 16:33:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is started.
TRACE: 2008-01-07 16:33:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is started.
TRACE: 2008-01-07 16:33:26 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPAPPL1' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport1\EXP1\DATA\SAPAPPL1.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPAPPL1.TSK MSS -l SAPAPPL1.log
TRACE: 2008-01-07 16:33:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is started.
TRACE: 2008-01-07 16:33:26 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPAPPL0' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport1\EXP1\DATA\SAPAPPL0.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPAPPL0.TSK MSS -l SAPAPPL0.log
TRACE: 2008-01-07 16:33:26 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSEXC' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExp4\EXP4\DATA\SAPSSEXC.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSSEXC.TSK MSS -l SAPSSEXC.log
TRACE: 2008-01-07 16:33:28 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSEXC' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -loadprocedure fast
TRACE: 2008-01-07 16:33:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL1' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL1.cmd -dbcodepage 4103 -l SAPAPPL1.log -loadprocedure fast
TRACE: 2008-01-07 16:33:32 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL0' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL0.cmd -dbcodepage 4103 -l SAPAPPL0.log -loadprocedure fast
INFO: 2008-01-08 00:15:00 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL1' import package is successfully completed.
TRACE: 2008-01-08 00:15:18 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is started.
TRACE: 2008-01-08 00:15:27 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPAPPL2' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExp4\EXP4\DATA\SAPAPPL2.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPAPPL2.TSK MSS -l SAPAPPL2.log
INFO: 2008-01-08 00:15:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL0' import package is successfully completed.
TRACE: 2008-01-08 00:15:56 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is started.
TRACE: 2008-01-08 00:15:56 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExp4\EXP4\DATA\SAPSDIC.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSDIC.TSK MSS -l SAPSDIC.log
TRACE: 2008-01-08 00:15:58 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPAPPL2' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPAPPL2.cmd -dbcodepage 4103 -l SAPAPPL2.log -loadprocedure fast
TRACE: 2008-01-08 00:16:02 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSDIC.cmd -dbcodepage 4103 -l SAPSDIC.log -loadprocedure fast
INFO: 2008-01-08 00:49:00 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is successfully completed.
TRACE: 2008-01-08 00:49:18 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is started.
TRACE: 2008-01-08 00:49:40 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPCLUST' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExp4\EXP4\DATA\SAPCLUST.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPCLUST.TSK MSS -l SAPCLUST.log
TRACE: 2008-01-08 00:50:11 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPCLUST' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPCLUST.cmd -dbcodepage 4103 -l SAPCLUST.log -loadprocedure fast
INFO: 2008-01-08 00:53:51 com.sap.inst.migmon.LoadTask run
Loading of 'SAPCLUST' import package is successfully completed.
TRACE: 2008-01-08 00:54:21 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLEXC' import package is started.
TRACE: 2008-01-08 00:54:40 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSLEXC' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport3\EXP3\DATA\SAPSLEXC.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSLEXC.TSK MSS -l SAPSLEXC.log
TRACE: 2008-01-08 00:54:48 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSLEXC' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLEXC.cmd -dbcodepage 4103 -l SAPSLEXC.log -loadprocedure fast
INFO: 2008-01-08 01:02:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLEXC' import package is successfully completed.
TRACE: 2008-01-08 01:02:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is started.
TRACE: 2008-01-08 01:02:50 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSSRC' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport5\EXP5\DATA\SAPSSRC.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSSRC.TSK MSS -l SAPSSRC.log
TRACE: 2008-01-08 01:03:11 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSSRC' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSRC.cmd -dbcodepage 4103 -l SAPSSRC.log -loadprocedure fast
INFO: 2008-01-08 01:09:19 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSRC' import package is successfully completed.
TRACE: 2008-01-08 01:09:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPPOOL' import package is started.
TRACE: 2008-01-08 01:09:51 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPPOOL' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport1\EXP1\DATA\SAPPOOL.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPPOOL.TSK MSS -l SAPPOOL.log
TRACE: 2008-01-08 01:09:55 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPPOOL' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPPOOL.cmd -dbcodepage 4103 -l SAPPOOL.log -loadprocedure fast
INFO: 2008-01-08 01:14:03 com.sap.inst.migmon.LoadTask run
Loading of 'SAPPOOL' import package is successfully completed.
TRACE: 2008-01-08 01:14:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDOCU' import package is started.
TRACE: 2008-01-08 01:14:18 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDOCU' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport1\EXP1\DATA\SAPSDOCU.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSDOCU.TSK MSS -l SAPSDOCU.log
TRACE: 2008-01-08 01:14:21 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDOCU' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSDOCU.cmd -dbcodepage 4103 -l SAPSDOCU.log -loadprocedure fast
INFO: 2008-01-08 01:15:50 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDOCU' import package is successfully completed.
TRACE: 2008-01-08 01:16:18 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is started.
TRACE: 2008-01-08 01:16:19 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSPROT' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport1\EXP1\DATA\SAPSPROT.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSPROT.TSK MSS -l SAPSPROT.log
TRACE: 2008-01-08 01:16:24 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSPROT' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSPROT.cmd -dbcodepage 4103 -l SAPSPROT.log -loadprocedure fast
INFO: 2008-01-08 01:17:55 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSPROT' import package is successfully completed.
TRACE: 2008-01-08 01:18:18 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLOAD' import package is started.
TRACE: 2008-01-08 01:18:24 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSLOAD' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport1\EXP1\DATA\SAPSLOAD.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSLOAD.TSK MSS -l SAPSLOAD.log
TRACE: 2008-01-08 01:18:31 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSLOAD' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSLOAD.cmd -dbcodepage 4103 -l SAPSLOAD.log -loadprocedure fast
INFO: 2008-01-08 01:18:43 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSLOAD' import package is successfully completed.
TRACE: 2008-01-08 01:18:46 com.sap.inst.migmon.LoadTask run
Loading of 'SAPUSER' import package is started.
TRACE: 2008-01-08 01:18:48 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPUSER' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport5\EXP5\DATA\SAPUSER.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPUSER.TSK MSS -l SAPUSER.log
TRACE: 2008-01-08 01:18:50 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPUSER' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPUSER.cmd -dbcodepage 4103 -l SAPUSER.log -loadprocedure fast
INFO: 2008-01-08 01:20:09 com.sap.inst.migmon.LoadTask run
Loading of 'SAPUSER' import package is successfully completed.
TRACE: 2008-01-08 01:20:15 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDDIM' import package is started.
TRACE: 2008-01-08 01:20:16 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPDDIM' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport1\EXP1\DATA\SAPDDIM.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPDDIM.TSK MSS -l SAPDDIM.log
TRACE: 2008-01-08 01:20:16 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDDIM' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDDIM.cmd -dbcodepage 4103 -l SAPDDIM.log -loadprocedure fast
INFO: 2008-01-08 01:20:26 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDDIM' import package is successfully completed.
TRACE: 2008-01-08 01:20:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDFACT' import package is started.
TRACE: 2008-01-08 01:20:45 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPDFACT' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport1\EXP1\DATA\SAPDFACT.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPDFACT.TSK MSS -l SAPDFACT.log
TRACE: 2008-01-08 01:20:46 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDFACT' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDFACT.cmd -dbcodepage 4103 -l SAPDFACT.log -loadprocedure fast
INFO: 2008-01-08 01:20:51 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDFACT' import package is successfully completed.
TRACE: 2008-01-08 01:21:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is started.
TRACE: 2008-01-08 01:21:22 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPDODS' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport1\EXP1\DATA\SAPDODS.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPDODS.TSK MSS -l SAPDODS.log
TRACE: 2008-01-08 01:21:23 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPDODS' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPDODS.cmd -dbcodepage 4103 -l SAPDODS.log -loadprocedure fast
INFO: 2008-01-08 01:21:25 com.sap.inst.migmon.LoadTask run
Loading of 'SAPDODS' import package is successfully completed.
TRACE: 2008-01-08 01:21:45 com.sap.inst.migmon.LoadTask run
Loading of 'SAPUSER1' import package is started.
TRACE: 2008-01-08 01:21:47 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPUSER1' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport5\EXP5\DATA\SAPUSER1.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPUSER1.TSK MSS -l SAPUSER1.log
TRACE: 2008-01-08 01:21:52 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPUSER1' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPUSER1.cmd -dbcodepage 4103 -l SAPUSER1.log -loadprocedure fast
INFO: 2008-01-08 01:21:53 com.sap.inst.migmon.LoadTask run
Loading of 'SAPUSER1' import package is successfully completed.
TRACE: 2008-01-08 01:22:16 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is started.
TRACE: 2008-01-08 01:22:16 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAP0000' import package:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -ctf I F:\ECC6\InstExport1\EXP1\DATA\SAP0000.STR "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAP0000.TSK MSS -l SAP0000.log -o D
TRACE: 2008-01-08 01:22:16 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAP0000' import package into database:
C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAP0000.cmd -dbcodepage 4103 -l SAP0000.log -loadprocedure fast
INFO: 2008-01-08 01:22:17 com.sap.inst.migmon.LoadTask run
Loading of 'SAP0000' import package is successfully completed.
ERROR: 2008-01-08 01:32:31 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSSEXC' import package is interrupted with R3load error.
Process 'C:\usr\sap\ECC\SYS\exe\uc\NTAMD64\R3load.exe -i SAPSSEXC.cmd -dbcodepage 4103 -l SAPSSEXC.log -loadprocedure fast' exited with return code -1,073,741,819.
For mode details see 'SAPSSEXC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
INFO: 2008-01-08 02:42:03 com.sap.inst.migmon.LoadTask run
Loading of 'SAPAPPL2' import package is successfully completed.
WARNING: 2008-01-08 02:42:17
Cannot start import of packages with views because not all import packages with tables are loaded successfully.
WARNING: 2008-01-08 02:42:17
1 error(s) during processing of packages.
INFO: 2008-01-08 02:42:17
Import Monitor is stopped. -
Error with Ecc 6.0 install during Abap import of SAPView Package
Hi All,
I am getting error while installing SAP ECC 6.0 SR3 on Windows Server 2008, SQL Server 2005.
all 98 of 99 ABAP imports ran well only at the last import the error was with the SAP View Package.
SAP View Log
=============================================================================
C:\usr\sap\C11\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20300202123417
C:\usr\sap\C11\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
C:\usr\sap\C11\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
C:\usr\sap\C11\SYS\exe\uc\NTAMD64\R3load.exe -ctf I I:\51034985_3\EXP3\DATA\SAPVIEW.STR C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL SAPVIEW.TSK MSS -l SAPVIEW.log
C:\usr\sap\C11\SYS\exe\uc\NTAMD64\R3load.exe: job completed
C:\usr\sap\C11\SYS\exe\uc\NTAMD64\R3load.exe: END OF LOG: 20300202123425
C:\usr\sap\C11\SYS\exe\uc\NTAMD64\R3load.exe: START OF LOG: 20300202123426
C:\usr\sap\C11\SYS\exe\uc\NTAMD64\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
C:\usr\sap\C11\SYS\exe\uc\NTAMD64\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jan 24 2008 01:41:44
C:\usr\sap\C11\SYS\exe\uc\NTAMD64\R3load.exe -i SAPVIEW.cmd -dbcodepage 4103 -l SAPVIEW.log -loadprocedure fast
(DB) INFO: connected to DB
(DB) ERROR: DDL statement failed
(CREATE VIEW [/1CN/AMFSAPH0FOR] ( [CLIENT] , [CPE_CONDTYPE_PR] , [MM_PURCH_ORG] , [MM_VENDOR_GROUP] , [MM_VENDOR] , [MM_SUPPL_VEND] , [KSCHL] , [OBJECT_ID] , [TIMESTAMP_TO] , [RELEASE_STATUS] , [KOPOS] , [CREATED_ON] , [VARNUMH] , [TIMESTAMP_FROM] , [KSCHL_SUPP] , [COND_GROUP_ID] , [MAINT_STATUS] , [CREATED_BY] , [SUPP_EXIST] , [SCALE_DIM] , [CPE_R_RATETYPE] , [CPE_R_RATE] , [CPE_R_CURRENCY] , [CPE_R_PRICEUNIT] , [CPE_R_UOM] , [CPE_F_FORMID] ) AS SELECT T0001."CLIENT", T0001."CPE_CONDTYPE_PR", T0001."MM_PURCH_ORG", T0001."MM_VENDOR_GROUP", T0001."MM_VENDOR", T0001."MM_SUPPL_VEND", T0001."KSCHL", T0001."OBJECT_ID", T0001."TIMESTAMP_TO", T0001."RELEASE_STATUS", T0001."KOPOS", T0001."CREATED_ON", T0001."VARNUMH", T0001."TIMESTAMP_FROM", T0001."KSCHL_SUPP", T0001."COND_GROUP_ID", T0001."MAINT_STATUS", T0001."CREATED_BY", T0001."SUPP_EXIST", T0001."SCALE_DIM", T0001."CPE_R_RATETYPE", T0001."CPE_R_RATE", T0001."CPE_R_CURRENCY", T0001."CPE_R_PRICEUNIT", T0001."CPE_R_UOM", T0001."CPE_F_FORMID" FROM "/1CN/CMFSAPH0FOR" T0001)
DbSlExecute: rc = 103
(SQL error 208)
error message returned by DbSl:
Invalid object name '/1CN/CMFSAPH0FOR'.
(DB) ERROR: DDL statement failed
(CREATE VIEW [/1CN/AMFSAPH1FDT] ( [CLIENT] , [CPE_CONDTYPE_PR] , [MM_PURCH_ORG] , [MM_VENDOR_GROUP] , [MM_VENDOR] , [MM_SUPPL_VEND] , [KSCHL] , [OBJECT_ID] , [TIMESTAMP_TO] , [RELEASE_STATUS] , [KOPOS] , [CREATED_ON] , [VARNUMH] , [TIMESTAMP_FROM] , [KSCHL_SUPP] , [COND_GROUP_ID] , [MAINT_STATUS] , [CREATED_BY] , [SUPP_EXIST] , [SCALE_DIM] , [CPE_R_RATETYPE] , [CPE_R_RATE] , [CPE_R_CURRENCY] , [CPE_R_PRICEUNIT] , [CPE_R_UOM] , [CPE_F_QUANSPLITR] , [CPE_F_COMBROUT] , [CPE_F_FORCOMMUOM] , [CPE_F_FORMQUANCN] , [CPE_F_R3ACCURACY] ) AS SELECT T0001."CLIENT", T0001."CPE_CONDTYPE_PR", T0001."MM_PURCH_ORG", T0001."MM_VENDOR_GROUP", T0001."MM_VENDOR", T0001."MM_SUPPL_VEND", T0001."KSCHL", T0001."OBJECT_ID", T0001."TIMESTAMP_TO", T0001."RELEASE_STATUS", T0001."KOPOS", T0001."CREATED_ON", T0001."VARNUMH", T0001."TIMESTAMP_FROM", T0001."KSCHL_SUPP", T0001."COND_GROUP_ID", T0001."MAINT_STATUS", T0001."CREATED_BY", T0001."SUPP_EXIST", T0001."SCALE_DIM", T0001."CPE_R_RATETYPE", T0001."CPE_R_RATE", T0001."CPE_R_CURRENCY", T0001."CPE_R_PRICEUNIT", T0001."CPE_R_UOM", T0001."CPE_F_QUANSPLITR", T0001."CPE_F_COMBROUT", T0001."CPE_F_FORCOMMUOM", T0001."CPE_F_FORMQUANCN", T0001."CPE_F_R3ACCURACY" FROM "/1CN/CMFSAPH1FDT" T0001)
DbSlExecute: rc = 103
(SQL error 208)
error message returned by DbSl:
Invalid object name '/1CN/CMFSAPH1FDT'.
========================================================================================================
When i clicked on retry i get following additions in log
(DB) ERROR: db_connect rc = 256
(DB) ERROR: DbSlErrorMsg rc = 29
while debugging found that the Table from which it wants to create view does not exsist in database.
Can someone help me with this. I know its common error but most of the earlier threads are with Oracle database has someone faced this issue with Sql Server?
Edited by: darsh4u123 on Jul 23, 2009 8:28 AM
Edited by: darsh4u123 on Jul 23, 2009 8:30 AM
Edited by: darsh4u123 on Jul 23, 2009 8:31 AMHi,
This is not a comman error.Sometimes you have to install from the scrach if this error comes.Here the error comes in the last step in sapview creation phage but actual error may happen before this at some step between 1to 99.
Now do below things
First check that your database is up and running.
Then repeat the installation.
If error comes then open the sapinst.log and check what are the steps where the error comes.
Regards
Ashok Dalai -
ERROR IN IMPORT PHASE ( CREATE NODE GROUPS) CAN ANY TELL ME SOLUTION
HI SAP EXPERTS,
Iam doing Export & Import for Converting my SAP system which was previously a "NON-UNICODE" system and iam about to convert it to "UNICODE" system.
i have followed the steps specified in the guide for converting a non-unicode system to unicode system for pre-conversion phase from T.code "SPUMG". and my Export was successful.
While Import phase iam getting an error in " CREATE NODE GROUPS".....
Iam using
DATABASE--> IBM DB2 8.2 Ver and fixpack 3.
can anyone please mention. we have execute any steps before starting an IMPORT.
Thanks in advance
Santosh Chaitanya
Edited by: santosh chaitanya on Aug 26, 2008 3:43 PMHI ,
please find the last line's of sapinst_dev.log
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2008-09-10 18:14:44.625 User(venus\db2h01).getLoginEnvironment() done: Properties({
CLASSPATH = .;C:\PROGRA1\IBM\SQLLIB\java\db2java.zip;C:\PROGRA1\IBM\SQLLIB\java\db2jcc.jar;C:\PROGRA1\IBM\SQLLIB\java\sqlj.zip;C:\PROGRA1\IBM\SQLLIB\java\db2jcc_license_cu.jar;C:\PROGRA1\IBM\SQLLIB\bin;C:\PROGRA1\IBM\SQLLIB\java\common.jar
ClusterLog = C:\WINDOWS\Cluster\cluster.log
ComSpec = C:\WINDOWS\system32\cmd.exe
DB2INSTANCE = db2h01
FP_NO_HOST_CHECK = NO
INCLUDE = C:\PROGRA1\IBM\SQLLIB\INCLUDE;C:\PROGRA1\IBM\SQLLIB\LIB
LIB = ;C:\PROGRA~1\IBM\SQLLIB\LIB
NUMBER_OF_PROCESSORS = 4
OS = Windows_NT
PATHEXT = .COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PROCESSOR_ARCHITECTURE = AMD64
PROCESSOR_IDENTIFIER = EM64T Family 6 Model 23 Stepping 6, GenuineIntel
PROCESSOR_LEVEL = 6
PROCESSOR_REVISION = 1706
TEMP = C:\Documents and Settings\hr1adm\Local Settings\Temp
TMP = C:\Documents and Settings\hr1adm\Local Settings\Temp
windir = C:\WINDOWS
DB2DB6EKEY = H01venus
DB2DBDFT = H01
DBMS_TYPE = db6
DBS_DB6_SCHEMA = saphr1
DSCDB6HOME = venus
SAPSYSTEMNAME = HR1
PATH = C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA1\IBM\SQLLIB\BIN;C:\PROGRA1\IBM\SQLLIB\FUNCTION;C:\PROGRA1\IBM\SQLLIB\SAMPLES\REPL;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA1\IBM\SQLLIB\BIN;C:\PROGRA1\IBM\SQLLIB\FUNCTION;C:\PROGRA1\IBM\SQLLIB\SAMPLES\REPL;C:\Program Files\IBM\SQLLIB\BIN;C:\Program Files\IBM\SQLLIB\FUNCTION;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\PROGRA1\IBM\SQLLIB\BIN;C:\PROGRA1\IBM\SQLLIB\FUNCTION;C:\PROGRA~1\IBM\SQLLIB\SAMPLES\REPL
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
Setting effective user to venus\db2h01
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2008-09-10 18:14:44.640 User(venus\db2h01).getId()
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2008-09-10 18:14:44.640 User(venus\db2h01).getId() done: S-1-5-21-465082378-1841671448-1313926673-1102
TRACE [synxccuren.cpp:913]
CSyCurrentProcessEnvironmentImpl::setEffectiveUser(PSyUser,iastring)
effective user corresponds to real user
TRACE [synxccuren.cpp:467]
grantAccessTo
Granted access rights 0xf037f for object winsta0 to user venus\db2h01 with inheritance flags 0.
TRACE [synxccuren.cpp:467]
grantAccessTo
Granted access rights 0xf01ff for object default to user venus\db2h01 with inheritance flags 0.
INFO 2008-09-10 18:14:44 [synxccuren.cpp:877]
CSyCurrentProcessEnvironmentImpl::setUser()
Switched to user: db2h01.
TRACE [iaxxejsexp.cpp:188]
EJS_Installer::writeTraceToLogBook()
2008-09-10 18:14:44.640 NWUsers.asRole() done
TRACE [iax6bnodeg.cpp:96]
CDB6NodeGroups::Create(const map<iastring,iastring>&)
lib=iamoddb6 module=CDB6NodeGroups
Entered: CDB6NodeGroups::Create(const map<iastring,iastring>&)
ERROR 2008-09-10 18:14:44 [iax6bnodeg.cpp:262]
CDB6NodeGroups::Create(const map<iastring,iastring>&)
lib=iamoddb6 module=CDB6NodeGroups
MDB-01067 'Create Nodegroup' does not work. Execution of Statement: create nodegroup IBMCATGROUP on nodes (0) returned with: DB6CliExecute(): [IBM][CLI Driver][DB2/NT64] SQL0707N The name "IBMCATGROUP" cannot be used because the specified identifier is reserved for system use. SQLSTATE=42939
TRACE [iaxxejsbas.hpp:460]
EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2008-09-10 18:14:44 [iaxxgenimp.cpp:736]
showDialog()
FCO-00011 The step CreateNodegroups with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_CreateNodegroups|ind|ind|ind|ind|17|0|CreateNodegroups was executed with status ERROR .
TRACE [iaxxgenimp.cpp:657]
showDialog()
<html><head></head><body><p>An error occurred while processing service <b>SAP ERP 2005 Support Release 1 > Additional Software Life-Cycle Tasks > System Copy > IBM DB2 UDB for UNIX and Windows > Target System > Central System > Based on AS ABAP > Central System Installation</b>. You may now</p><ul> <li>press <I>Retry</I> to repeat the current step.</li> <li>press the <I>View Log</I> button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul><p>Log files are written to <b>C:/sapinstlog</b>.</p></body></html>
TRACE [iaxxgenimp.cpp:1093]
showDialog()
waiting for an answer from gui
INFO 2008-09-10 18:14:49 [iaxxgenimp.cpp:787]
showDialog()
An error occured and the user decide to stop.\n Current step "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|9|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_DB6_DB|ind|ind|ind|ind|1|0|NW_DB6_CreateNodegroups|ind|ind|ind|ind|17|0|CreateNodegroups".
TRACE [iaxxbprocess.cpp:55]
CIaOsProcess::CEIdJanitor::~CEIdJanitor()
Switching back to user Administrator.
TRACE [synxccuren.cpp:913]
CSyCurrentProcessEnvironmentImpl::setEffectiveUser(PSyUser,iastring)
effective user corresponds to real user
TRACE [synxccuren.cpp:787]
CSyCurrentProcessEnvironmentImpl::setUser()
Terminated current impersonation.
please provide me a solution...
Santosh
Maybe you are looking for
-
The movie is downloaded, I know where it is, I can start in different chapters, but it only works for 24 seconds before it shuts down and I have to close the program. I have uninstalled iTunes, Quick Time and downloaded and installed after restartin
-
Error executing DB2 stored proc
Hi, We are trying to execute a Stored Proc in Mainframe DB2. We've prepared a PreparedStatement. The problem the stored proc works fine in some cases, but in some it fails even thouhg the data passed is same. Even the whole JVM crashes and there is n
-
How to install Sun Java System Application Server PE 9 in debian
Hi, I have ubuntu installed on my system. I wanted to install the Sun Java System Application Server PE 9 on it. I didn't see any debian package for it on Sun's downloads. I downloaded the linux version and tried to install it. I got the following re
-
Saving editable column contents in Std. Table using ALV
Hi All, I developed a ALV report which displays list of sales orders of particular customer, in this report created by name is editable column. Now i want to save the created by name after user changes the contents of this column and click on save
-
Problem in Configuring webutility in 10g application
Hi, Problem in Configuring webutility in 10g application the message is oracle.forms.webutil.ole.oleFunction bean not found Client_OLE2.create_ole will not work Please Help.