ABAP interfaces build using BDC and BAPIs can be used/replaced with the XI?
Hi,
We have develeloped our interfases using BDC and BAPIs. Now our client has decited to implement XI. Now could you please help in finding whether these interfaces can be used/replaced with the XI.
If yes, please let us know how?
Thanks and Regards,
Shweta
Singh,
Check this threads where they have discussed on how to use them with XI:
import BAPI into XI
Re: interface of xi with bapi
Re: BDC
Regards,
---Satish
Similar Messages
-
So my phone is messed up and you can't do anything with the screen...in order for me to sink it to back up i have to enter the passcode because it had a lock on it...and i can't due to it being messed up...is there any way around this...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
i plugged my iphone 4S into my computer for the first time and then my photos were replaced with the ones from my old iphone, how do i get them back?
Try restoring from the backup created at the beginning of the sync process:
Without connecting your phone, open iTunes, go to Preferences, on the Devices tab check "Prevent...from syncing automatically"
Connect your phone, right-click on the name of your phone when it appears on the left sidebar in iTunes
Select Restore from backup, choosing your most recent backup to restore from
Disconnect your phone and confirm that your photos are back
Go back to iTunes>Preferences>Devices and re-enable automatic syncing. -
it says its in recovery mode but idk for sure
iPod touches or any iDevices from Apple sync only to one computer. If you sync to a different computer, all your music will be replace with the music from the new computer's iTunes. If the music were purchased from iTunes, you can re-download them again otherwise the music on iPod touch will be deleted. Do you have iTunes backup?
-
I used to have my upcoming events pop up in the right hand top corner of my screen. Since I upgraded my maverick, this function is not longer working and I can't get it back with the calendar help instructions.
Anyone out there who can tell me how to get back my evnet alerts in the right top corner of my screen? it even had a snooze function!Check System Preferences > Notifications and make sure the Calendar entry is set up as you wish.
-
How to insert delay without using loops, and how can I use variable to store data in labview
Hi all,
I am new to Labview and I realized that quite often I am in condition to require a delay beween two functions or elements.. how can we insert a delay in such cases?
I know how to use delays in a loop. but don't know how to inser some time delay between two elements.
I have one more question, I know its a bad practice to post 2 questions in 1 thread.
How can I use a temporary variable to store data, So far I am storing it in an indicator by making it invisible in front panel and making local variable of that indicator, is it the right way to do it ?
Thanks in advance.Generally, LV doesn't have variables in the same sense that most languages do. You can use indicators to perform the same function as variables, but as Adnan pointed out, you run the risk of having race condition and it creates data copies, which is a problem if you have a lot of data. In most cases, you should use wires to perform the function of variables, which is to store data and make it available to the different functions in your code. Instead of thinking about variables, you need to think about data (something like "I have the data coming out of this function. Where does it need to go?").
Try to take over the world! -
Does The I phone 5s have a different charging cable ??
Well, assuming all of the above, Notifications, etc., it just might be time for a visit to the Apple tore genius center for a session with the techs. See if it is a fault in the hardware or just an iOS reinstall is the answer.
One more thing you could try, backup so you have a record of content, then restore to factory conditions be an Erase All Contents and Settings. Then restore from the backup you just made. That has helped some with WiFi problems, may be it would work with your problems.
But with that behavior of another app with problems, the geniuses looks like a less stressful thing to do. -
Hello, I try to used my account last Sunday, April the 29th, I had to changed the password because the institutions tall me that my account was disabled so I follow the instructions and the apple TV keeps on tell in me that the account has been disabled.
Also I try to enter with the computer with the I tunes account and it goes trow but If a try to redeem a card it seas that the account is disabled as well.
Can you let me know what should I do??
Thanks
Rosa MariaContact itunes support
-
..this library" i only have 3 apps showing in the "ipod touch apps" sidebar on the left, and i don't know if i click sync just to get them on the ipod touch, if they will replace EVERY other app on the ipod. before there used to be a list of all the apps i downloaded but its not showing now. and i cant even move around the apps on the screen on the right that shows what the ipod screen looks like.
Thanks MikePremium, but what happens after the sync is that I can see all the apps appear in the "Sync Apps" section, but grayed out, and then iTunes asks for my credentials but then it tells me it can't communicate with the store and to try again later.
If I try to check the "Sync Apps" box, it gives me the same warning message as before about how my apps will be replaced by the apps from "this library".
What do I do now? I synced to iTunes last week. Got a few new apps directly into my IPT since, but now I'm in the same situation as you guys. Now that I think of it, there may have been an iTunes update between the last time I synced and now. I subgrouped many apps and I can see the subgroups on the representation of my IPT in iTunes.
The drag about the message, is that if it DOES replace the apps, some new data in each of these apps will be lost. -
IPhone5 can only be replaced with the the 5C by Asurion
I have to say that I am really dissapointed in the scam that is being run. I have an IPhone 5 that was in a Lifeproof case but broke when it was dropped accidently. I tried to put a claim in to get the phone replaced and was told that I can pick a white or blue 5C. Apple is no longer supplying them with IPhone5. They are trying to sell it by saying it has a better camera and processor, unfortunatly it looks like a phone for a child. The reviews state that its a cheap phone dressed up in a cute package. So BEWARE if you have an IPhone5 this is what you will get. I work in a large company and have been talking to many of my co-workers that have Verizon (we get an employee discount) an no one was aware that they would end up with this phone. Everyone has started dropping the insurance becasue no one wants a 5C. After looking at my options I will go with Apple Care from now on to aviod this problem.
The iPhone 5C is kinda, sorta, technically a new product -- colorful, cute, with a variety of interchangeable color cases much like the recently released Motorola Moto X -- but under the hood it's really an iPhone 5 with a new paint job, and a cheaper price: $99 on contract (or even less, if you shop around).
To be clear, we loved the iPhone 5 when it first hit in 2012. It met every one of our needs, kept up with the competition, and presented a sweet spot of features: fast LTE wireless, a larger 4-inch screen, plenty of performance tweaks, a faster processor, and a really great camera. All of those features are back with the 5C.
The only new additions to the 5C (versus the old 5) are iOS 7 coming preinstalled, new LTE antennas that work with more international carriers, a better low-light-sensitive front-facing FaceTime HD camera, and a slightly increased internal battery versus last year's model -- better on paper, but not on a magnitude that most people would appreciate.
What the iPhone 5C isn't is a radical "budget" iPhone. It's not the affordable contract-free prepaid device some dreamed of. Instead, it's an iPhone 5 with a candy-colored polycarbonate shell. If you want something more advanced under the hood, the iPhone 5S is what you're looking for; if you want a bigger screen, nearly any Android phone will be a better choice.
http://reviews.cnet.com/iphone-5c/No I didn't think the would give me the 5s I thought they would give me the phone I insured the 5. That's the phone I paid for not a plastic phone that looks like it's for a little kid. If that phone was the option when I made the purchase in May I would have waited. I just feel like it's how they are getting rid of a phone that most people don't want.
The supervisor and customer service rep agreed that the 5c option is making a lot of people unhappy and they would not want it either.
I am also putting this out there as a buyer beware. If you purchase an IPhone get the Apple care and not the insurance through Verizon. It's cheaper and you will get better service. -
The iPod was working fine, then after about 45 minutes of use i looked as if battery drained.
I charged it fully again (until green light) and then turned it on, green light and then orange light blinks five times...
I can't play /pause, or turn volume up or down from the remote... tried with original Apple earphones, and two Bose MIE2i (original and sports models)...
Any ideas of what can be wrong? or how can I fix it?
Already tried restoring it to factory settings.... it didn't solved the problem...Hey there PakoArreola!
I have a website here for you that can help you troubleshoot this issue with your iPod shuffle:
Apple - Support - iPod - iPod shuffle (3rd generation) Troubleshooting
http://www.apple.com/support/ipod/five_rs/shuffle3gen/
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
My phone is no longer ringing even though the volume is on. Also, I can only hear anything if I use the headphones.
HelpTry This...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If no joy...
Connect to iTunes on the computer you usually Sync with and “ Restore “...
http://support.apple.com/kb/HT1414 -
HT5622 my icloud id does not match my apple id and i can't do anything with my phobne
i am trying to give this phone to my son to use as an ipod and i want to erase it first but my iclound id is not the same as my apple id and i can't do anything with the phone. and no i do not know the password to my icloud id since i never set up the account
Hey quaisser,
Some of the following steps don't fully apply to your situation, but I'd run through the ones I haven't crossed off to see if that resolves the issue:
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
via: iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Welcome to Apple Support Communities!
Regards,
Delgadoh -
Do we need to create a bapi, badi and how can I use them
Hi all,
Please write me about the topics at subject.
Will I use BAPI with Java or C# or VB, whatever...
And for example for what I will use BADI.
Could you provide me code sample to use these?
Thanks.Hi,
BAPI stands for Business API(Application Program Interface).
I have answered this question before..
A BAPI is remotely enabled function module ie it can be invoked from remote programs like standalone JAVA programs, web interface etc..
You can make your function module remotely enabled in attributes of Function module but
A BAPI are standard SAP function modules provided by SAP for remote access. Also they are part of Businees Objest Repository(BOR).
BAPI are RFC enabled function modules. the difference between RFc and BAPI are business objects. You create business objects and those are then registered in your BOR (Business Object Repository) which can be accessed outside the SAP system by using some other applications (Non-SAP) such as VB or JAVA. in this case u only specify the business object and its method from external system in BAPI there is no direct system call. while RFC are direct system call Some BAPIs provide basic functions and can be used for most SAP business object types. These BAPIs should be implemented the same for all business object types. Standardized BAPIs are easier to use and prevent users having to deal with a number of different BAPIs. Whenever possible, a standardized BAPI must be used in preference to an individual BAPI.
The following standardized BAPIs are provided:
Reading instances of SAP business objects
GetList ( ) With the BAPI GetList you can select a range of object key values, for example, company codes and material numbers.
The BAPI GetList() is a class method.
GetDetail() With the BAPI GetDetail() the details of an instance of a business object type are retrieved and returned to the calling program. The instance is identified via its key. The BAPI GetDetail() is an instance method. BAPIs that can create, change or delete instances of a business object type
The following BAPIs of the same object type have to be programmed so that they can be called several times within one transaction. For example, if, after sales order 1 has been created, a second sales order 2 is created in the same transaction, the second BAPI call must not affect the consistency of the sales order 2. After completing the transaction with a COMMIT WORK, both the orders are saved consistently in the database.
Create( ) and CreateFromData! ( )
The BAPIs Create() and CreateFromData() create an instance of an SAP business object type, for example, a purchase order. These BAPIs are class methods.
Change( )
The BAPI Change() changes an existing instance of an SAP business object type, for example, a purchase order. The BAPI Change () is an instance method.
Delete( ) and Undelete( ) The BAPI Delete() deletes an instance of an SAP business object type from the database or sets a deletion flag.
The BAPI Undelete() removes a deletion flag. These BAPIs are instance methods.
Cancel ( ) Unlike the BAPI Delete(), the BAPI Cancel() cancels an instance of a business object type. The instance to be cancelled remains in the database and an additional instance is created and this is the one that is actually canceled. The Cancel() BAPI is an instance method.
Add<subobject> ( ) and Remove<subobject> ( ) The BAPI Add<subobject> adds a subobject to an existing object inst! ance and the BAPI and Remove<subobject> removes a subobject from an object instance. These BAPIs are instance methods.
Example Code
U need to give the step_nr, item_nr, cond_count and cond_type so the correct conditon will be updated. If no condition exists for the given parameters, a new condition will be created.
U can find these parameters for a particular condition type in table KONV.
*& Form saveTransactionJOCR
text
--> p1 text
<-- p2 text
FORM saveTransactionJOCR .
data: salesdocument like BAPIVBELN-VBELN,
order_header_inx like bapisdh1x,
order_header_in like bapisdh1,
return type standard table of bapiret2 with header line,
conditions_in type standard table of bapicond with header line,
conditions_inx type standard table of bapicondx with header line,
logic_switch like BAPISDLS,
step_nr like conditions_in-cond_st_no,
item_nr like conditions_in-itm_number,
cond_count like conditions_in-cond_count,
cond_type like conditions_in-cond_type.
salesdocument = wa_order_information-VBELN.
LOGIC_SWITCH-COND_HANDL = 'X'.
order_header_inx-updateflag = 'U'.
conditions
clear conditions_in[].
clear conditions_inx[].
clear: step_nr,
item_nr,
cond_count,
cond_type.
step_nr = '710'.
item_nr = '000000'.
cond_count = '01'.
cond_type = 'ZCP2'.
CONDITIONS_IN-ITM_NUMBER = item_nr.
conditions_in-cond_st_no = step_nr.
CONDITIONS_IN-COND_COUNT = cond_count.
CONDITIONS_IN-COND_TYPE = cond_type.
CONDITIONS_IN-COND_VALUE = 666.
CONDITIONS_IN-CURRENCY = 'EUR'.
append conditions_in.
CONDITIONS_INX-ITM_NUMBER = item_nr.
conditions_inx-cond_st_no = step_nr.
CONDITIONS_INX-COND_COUNT = cond_count.
CONDITIONS_INX-COND_TYPE = cond_type.
CONDITIONS_INX-UPDATEFLAG = 'U'.
CONDITIONS_INX-COND_VALUE = 'X'.
CONDITIONS_INX-CURRENCY = 'X'.
append conditions_inx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = salesdocument
ORDER_HEADER_IN = order_header_in
ORDER_HEADER_INX = order_header_inx
LOGIC_SWITCH = logic_switch
TABLES
RETURN = return
CONDITIONS_IN = conditions_in
CONDITIONS_INX = conditions_inx
if return-type ne 'E'.
commit work and wait.
endif.
ENDFORM. " saveTransactionJOCR
Bdc to Bapi
The steps to be followed are :
1. Find out the relevant BAPI (BAPI_SALESORDER_CHANGE for VA02).
for VA01 use BAPI_SALESORDER_CREATEFROMDAT2
2. Create a Z program and call the BAPi (same as a Funtion module call).
2. Now, if you see this BAPi, it has
-> Importing structures.
eg: SALESDOCUMENT: this will take the Sales order header data as input.
-> Tables parameters:
eg: ORDER_ITEM_IN: this will take the line item data as input.
Note :
Only specify fields that should be changed
Select these fields by entering an X in the checkboxes
Enter a U in the UPDATEFLAG field
Always specify key fields when changing the data, including in the checkboxes
The configuration is an exception here. If this needs to be changed, you need to complete it again fully.
Maintain quantities and dates in the schedule line data
Possible UPDATEFLAGS:
U = change
D = delete
I = add
Example
1. Delete the whole order
2. Delete order items
3. Change the order
4. Change the configuration
Notes
1. Minimum entry:
You must enter the order number in the SALESDOCUMENT structure.
You must always enter key fields for changes.
You must always specify the update indicator in the ORDER_HEADER_INX.
2. Commit control:
The BAPI does not run a database Commit, which means that the application must trigger the Commit so that the changes are read to the database. To do this, use the BAPI_TRANSACTION_COMMIT BAPI.
For further details... refer to the Function Module documentation for the BAPi.
Bapi to VB(Visual Basic)
Long back I had used the following flow structure to acheive the same.
Report -> SM59 RFC destination -> COM4ABAP -> VB.exe
my report uses the rfc destination to create a COM session with com4abap. com4abap calls the vb.exe and manages the flow of data between sap and vb exe.
You need to have com4abap.exe
If com4abap is installed you will find it in sapgui installatin directory , C:\Program Files\SAPpc\sapgui\RFCSDK\com4abap.
else refer OSS note 419822 for installation of com4abap
after making the settings in com4abap to point to the vb program and setting up rfc destination in sm59 to point to com4abap session , you can use the following function modules to call the vb code.
for setting up com4abap and rfc destination please refer to the documentation for com4abap.
Invoke NEW DCOM session
call function 'BEGIN_COM_SESSION'
exporting
service_dest = service_dest "(this will be a RFC destination created in SM59)
importing
worker_dest = worker_dest
exceptions
connect_to_dcom_service_failed = 1
connect_to_dcom_worker_failed = 2
others = 3.
call function 'create_com_instance' destination worker_dest
exporting
clsid = g_c_clsid
typelib = g_c_typelib
importing
instid = g_f_oid
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
call function 'com_invoke' destination worker_dest
exporting
%instid = g_f_oid
%method = 'UpdatePDF'
sntemp = g_v_const_filent
snsysid = sy-sysid
snflag = 'N'
tables
rssaptable = g_t_pdfdetail1
%return = g_t_pdfdetail1 "t_test
exceptions
communication_failure = 1 message g_f_msg
system_failure = 2 message g_f_msg
invalid_instance_id = 3
others = 4.
then close the com session , using
FM delete_com_instance
FM END_COM_SESSION
Also refer to the following links..
www.sappoint.com/abap/bapiintro.pdf
www.sap-img.com/bapi.htm
www.sap-img.com/abap/bapi-conventions.htm
www.planetsap.com/Bapi_main_page.htm
www.sapgenie.com/abap/bapi/index.htm
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
BAPI-step by step
http://www.sapgenie.com/abap/bapi/example.htm
list of all bapis
http://www.planetsap.com/LIST_ALL_BAPIs.htm
for BAPI's
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
http://www.planetsap.com/Bapi_main_page.htm
http://www.topxml.com/sap/sap_idoc_xml.asp
http://www.sapdevelopment.co.uk/
http://www.sapdevelopment.co.uk/java/jco/bapi_jco.pdf
BADI(Business Add-In) is the object oriented method of user exits...
Each BAdI has a definition and more than one implementation. The definition means the methods(in class concept) that are used for performing various functions. The BAdI definition can be viewed in SE18 transaction(for standard ones) and user-defined BAdIs can be created in the same transaction as well.
When you create a BAdI definition, an class interface will be automatically created and you can define your methods in the interface. The implementation of the methods can be done in SE19 transaction
Intro.....
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
Check these links for info about badi..
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
BADI's
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/web/BAdI
http://www.allsaplinks.com/badi.html
New to Badi
Regards,
Raj. -
About note and how can be used?
Hi guru's
Application area
Causing note
Note text
Note version(s)
In Support Package
Note Version
Application area
Solving Note
Note text
Note Version
Priority
PM
1702698
Call horizon in days - Correction interface
0001 to 9999
SAPKH60022
1
PM-PRM-MP
1953397
IP17 : dump when processing big amount of data
1
Correction with medium priority
PM-PRM-MP
1789684
Mismatch between setlement rule and planning plant
0001 to 9999
SAPKH60023
1
PM-PRM-MP
1953997
Message IP343 is raised incorrectly
1
Correction with medium priority
PM-PRM-TL
1618758
IA10, IA17: Wrong data is displayed
0001 to 9999
SAPKH60021
2
PM-PRM-TL
1967534
IA10: Performance problem when lot of tasklists are processed in Diaplay Multi-level tasklist
1
Correction with medium priority
PM-PRM-TL
1665112
Enhancing the call horizon - interface note
0001 to 9999
SAPKH60022
1
PM-PRM-MP
1890025
Call horizon in days - change documents are missing
1
Correction with medium priority
PM-PRM-TL
1804473
IA17: Long text truncated when printing task lists
0001 to 9999
SAPKH60024
3
LO-MD-MM
1832789
DIMP: Follow up note 1804473
1
Correction with high priority
PM-PRM-TL
1808918
IP16 doesn't select all maintenance plans
0001 to 9999
SAPKH60024
1
PM-PRM-MP
1953397
IP17 : dump when processing big amount of data
1
Correction with medium priority
PM-PRM-TL
1811570
IP16 doesn't select all maintenance plans (interface note)
0001 to 9999
SAPKH60024
2
PM-PRM-MP
1953397
IP17 : dump when processing big amount of data
1
Correction with medium priority
PM-WOC
1759689
Header long text line length - missing text IW3x
0001 to 9999
SAPKH60023
2
PM-WOC-MO
1875327
Short text corrupted when long text contains special char.
1
Correction with medium priority
PM-WOC-LE
1664071
IW38/IW39: Estimated Costs are displayed incorrectly
0001 to 9999
SAPKH60021
2
PM-WOC-MO
1678480
Syntax error in Enhancement /OLC/SAPLICO1_OLC
1
Correction with medium priority
PM-WOC-LE
1812697
IW37N: Release of an order doesn't change operation status
0001 to 9999
SAPKGPAD23
1
PM-WOC-LE
1958073
Changes to the list transactions IW37N and IW38 - 2
1
Correction with medium priority
PM-WOC-LE
1812697
IW37N: Release of an order doesn't change operation status
0001 to 9999
SAPKGPAD23
1
PM-WOC-LE
1957961
Changes to the list transactions IW37N and IW38 - 1
1
Correction with medium priority
PM-WOC-LE
1822976
IW37N: Header fields of the order are not updated
0001 to 9999
SAPKGPAD24
2
PM-WOC-LE
1957961
Changes to the list transactions IW37N and IW38 - 1
1
Correction with medium priority
PM-WOC-LE
1822976
IW37N: Header fields of the order are not updated
0001 to 9999
SAPKGPAD24
2
PM-WOC-LE
1958073
Changes to the list transactions IW37N and IW38 - 2
1
Correction with medium priority
PM-WOC-LE
1822976
IW37N: Header fields of the order are not updated
0001 to 9999
SAPKGPAD24
2
PM-WOC-LE
1877495
IW37N: Changing multiple orders does not work
1
Correction with medium priority
PM-WOC-MN
1569664
Action box in a PM/CS notification is not called correctly
0001 to 9999
SAPKH60021
2
PM-WOC-MN
2019716
Fehler bei Meldungsanlage über Folgeaktion zur Maßnahme
1
Correction with medium priority
PM-WOC-MN
1756952
Maintenance view T355E_W: Runtime error RAISE_EXCEPTION
0001 to 9999
SAPKH60023
2
PM-WOC-MN
1908372
Define Response Profile: Error message SV 033
1
Correction with medium priority
PM-WOC-MO
1694834
Correction: "Document assignments for maintenance order"
0001 to 9999
SAPKH60022
1
PM-WOC-MO
1775663
Maintenance order screen sizes
5
Correction with high priority
PM-WOC-MO
1695763
Missing object lists, dump for notif. creation from order
0001 to 9999
SAPKH60022
7
PM-WOC-LE
1741839
IW37N: Revision level not updated automatically in the list
1
Correction with medium priority
PM-WOC-MO
1733309
Runtime error in IBAPI_ALM_ORDER_POST
0001 to 9999
SAPKGPAD22
2
PM-WOC-MO
2011849
IBAPI_ALM_ORDER_POST löscht Meldungsvariablen, die in BAdI WORKORDER_UPDATE gesetzt wurden
1
Correction with medium priority
PM-WOC-MO
1773410
Basic Order View: Cost element is not filled for an ext oper
0001 to 9999
SAPKGPAD24
2
PM-WOC-MO
1971482
Basic order view operation detail: Error message IW 113
1
Correction with high priority
PM-WOC-MO
1817536
BUS2007 and BUS2088: Attribute Notification not supplied
0001 to 9999
SAPKH60024
1
PM-WOC
1901669
BUS2007/BUS2088: Notification attribute is not supplied
1
Correction with high priority
PM-WOC-MO
1818999
IW32: Environment display for field RESBD-POSNR impossible
0001 to 9999
SAPKGPAD24
2
PM-WOC-MO
1931707
Some buttons not working in the component overview
1
Correction with high priority
PM-WOC-MO
1819505
IW32: No check on WBS element and network activity in order
0001 to 9999
SAPKH60024
2
PM-WOC-MO
2005929
EAM order: Assignment of network activity is reset
1
Correction with medium priority
PM-WOC-MO
1825733
BAPI_ALM_ORDER_GET_DETAIL: Runtime error CONVT_NO_NUMBER
0001 to 9999
SAPKH60024
2
PS-COS-PLN-CAL
1841113
CNECP_MAINTAIN: ECP data not updated for operations
1
Correction with medium priority
PM-WOC-MO
1853340
Calculation key not determined if work center is changed
0001 to 9999
SAPKH60024
3
PM-WOC-MO
1897140
IW31: Control key not passed to the dummy operation
1
Correction with medium priority
how can we manipulate it and how they effect on our sap and how can be used it
best regards
AtulAtul,
The first thing to check whether you already have them installed - ask your ABAP/Basis Team.
If not, you then need to determine whether they are include in any hot packs that you may be installing in the near future - again ask your ABAP/Basis Team..
Lastly - and probably most difficult - check whether you actually need them..
Also be aware that these notes may require that other notes be installed first (i.e. prerequisite notes).
PeteA
Maybe you are looking for
-
In one of my report output, I need to include a link(url) to file on Shared Drive. The path is stored in database and it will be retrieved in query. The file can be either PDF/WORD/Excel for now. For ex. e:\\abc\share\test.xls should appear as url in
-
HT3662 how to cancel downloading Mavericks while in progress on macbook pro
I started downloading latest Mavericks OS and realized I had already downloaded the latest version. Cannot cancel the download. What do I do?
-
Datagrid last row flickering problem.
Hi, I used flex 3.5 datagrid. It is a complex datagrid with lot of itemrenderers and itemeditors.when my datagrid has vertical scroll and when i scroll datagrid, last row keep on flickering. any idea or solution for this problem?
-
AIR 14 Beta - Missing builtin type Object
I get "Missing builtin type Object" error message in Flash Builder after updating to AIR 14 Beta from projects that do NOT include AIR libraries. Tried the usual Clean Projects > re-open projects > re-launch Flash Builder without any luck this time..
-
Hi, I have built an XML download to a web-server htdocs directory using the Oracle XML functionality. Part of the download is an XSL transformation to mark up the XML with WORDML so that it can formatted neatly in word. All seems ok until I try and a