ABAP+JAVA Add In Licensing

Hi Friends I had installed an ABAP system and then applied the license using SLICENSE for the ABAP engine only, after that I installed JAVA add in, I didnt install any license later as I had read that JAVA Add in doesnt require ny separte license only a Standalone JAVA system needs a separate license, but I find that after every 30 days or so my JAVA Engine crashes, Ny Idea people?

Hi Karan,
For ABAP+JAVA installation normally only one license key is needed and is called standard license key.
However in you case since add on was done after licensing was done you need to get a new license.
Java Add on can be classified as kind of upgrade and hence new license is needed.
Please check the following links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/a7/512c6e407a11d1893b0000e8323c4f/frameset.htm
https://websmp207.sap-ag.de/licensekey
In the second link check frequently asked questions.
Here it is stated :
Under what circumstances do I have to request a license key for an existing system?
In the case of a hardware change, database change, upgrade or expiration date change.
Please award points for useful info.
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

Similar Messages

Portal in ABAP+Java Add-in WAS

Hi There,
I'm evaluating a possibility of a implementation of SAP EP 6.0 SP 11 in an WAS 6.40 ABAP+Java Add-in some peoples have spoken for me that still have problems with this implementation. Do you can help me with your experiences!?
Regards;
Carlos Motta

Hi
Which kinds of problems?
We have installed an EP 6.0 SP12 in a java add-in without any installation problems at all... so again: Which kinds of problems have you heard of?
We are not using the portal yet, som of cause problems can arise that we haven't seen yet.
I can think of one issue, namely that when installing on a java add-in the the uset store configuration is set to R3 (abap stack) and it it not supportet to change this to i.e. LDAP after the installation (installing EP on a Java standalone uses "database", which can be change for LDAP)
BR
Tom Bo

Starting J2EE(ABAP+Java Add In)

Hi
We've got BW 3.5 on Sap NetWeaver 2004 ABAP + Java (Java Add-In). We've got the problem with starting it.
Our system is on 1 server x64. We've got Windows 2003 Server. DataBase Oracle.
So in MMC everything is OK. We've got ABAP + Java instance (processes msg_server.exe, disp+work.exe,igswd.exe )
and Central Services (msg_server.exe, enserver.exe ).
First we didn't have some parametrs in our profile(DBW_DVEBMGS00_sap2). I added such as
icm/HTTP/j2ee_0 PREFIX=/, HOST=sap2, CONN=0-10, PORT=50000
rdisp/j2ee_start_lazy 1
rdisp/j2ee_timeout 600
rdisp/j2ee_start 1
exe/j2ee F:usrsapDBWDVEBMGS00j2eeos_libsjcontrol.exe
The problem is that i can't log in to my Visual Administrator and can't reach http://localhost:50000
Another problem is that i can't see in directory "F:\usr\sap\DBW\DVEBMGS00\work\" such log files as dev_bootstrap dev_jcontrol dev_server0 dev_jcmon
In SICF i've started all the services.
In the transaction SMICM i've got such a picture
HTTP Application Server Handler
ABAP Server operational = TRUE
J2EE Server configured = TRUE
J2EE HTTP port =
J2EE HTTPS port =
J2EE Server operational = FALSE
Default root access handler = ABAP
URL Prefix Table loaded = FALSE
What problem could it be? What log files should i see to find the problem?
From the first view only in dev_icm there are WARNINGS
[Thr 5876] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 5 seconds [icxxtool.c 1012]
[Thr 5876] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxtool.c 1068]
Thanks for you help

1) The folder is shared and the user <SAP_ID>adm(dbwadm) has all permissions(FullControll).
2) About J2EE profile parametrs i wrote before.
in my profile of ABAP + Java add in instance
(H:\usr\sap\DBW\SYS\profile\DBW_DVEBMGS00_sap2) i added parametrs
icm/HTTP/j2ee_0 PREFIX=/, HOST=sap2, CONN=0-10, PORT=50000
rdisp/j2ee_start_lazy 1
rdisp/j2ee_timeout 600
rdisp/j2ee_start 1
exe/j2ee F:\usr\sap\DBW\DVEBMGS00\j2ee\os_libs\jcontrol.exe
icm/server_port_0 PROT=HTTP,PORT=8100
I didn't manage to add parametrs because it's written "W:Unknown parameter jstartup/trimming_properties , a check cannot be performed "
[code]
jstartup/instance_properties
jstartup/trimming_properties
jstartup/protocol
jstartup/vm/home
exe/jlaunch
jstartup/vm/home
[/code]
Also i had a profile for Central Service Instance with parametrs
[code]
SAPSYSTEMNAME = DBW
INSTANCE_NAME = SCS01
SAPSYSTEM = 01
DIR_GLOBAL = F:\usr\sap\DBW\SYS\global
DIR_PROFILE = F:\usr\sap\DBW\SYS\profile
DIR_EXECUTABLE = F:\usr\sap\DBW\SCS01\exe
SAPGLOBALHOST = sap2
DIR_CT_RUN = F:\usr\sap\DBW\SYS\exe\nuc\NtIa64U
rdisp/msserv = 3601
enque/table_size = 4096
enque/deque_wait_answer = FALSE
enque/process_location = LOCAL
enque/encni/port = 3201
rdisp/enqname = $(rdisp/myname)
enque/snapshot_pck_ids = 100
ms/server_port_0 = PROT=HTTP, PORT=8101
[/code]
3)j2sdk1.4.2_11-x64 including jre
4) That's the problem.
When i run it and choose "Local Administrator menue" it's written "Can't open shared memory administration (rc=3)"
What problem could it be?
Thanks

Installation ABAP+Java(add-in) jlaunch.exe missing

Hi,all
After finish installation ABAP and web AS java(add-in)
My java engine only has processes
msg_server.exe
enserver.exe
and process
Dispatcher and server process (two jlaunch.exe)
n Software Deployment Manager (SDM, jlaunch.exe)
is not there.
I think I miss jlauch.exe.And I can not use jcmon
and Visual Administrator.
and in my profile E:\usr\sap\RF2\SYS\profile\START_SCS11_RFIDServer
Global variables
SAPSYSTEMNAME = RF2
INSTANCE_NAME = SCS11
DIR_EXECUTABLE = E:\usr\sap\RF2\SCS11\exe
DIR_LIBRARY = E:\usr\sap\RF2\SCS11\exe
SAPSYSTEM = 11
SAPGLOBALHOST = RFIDServer
DIR_PROFILE = E:\usr\sap\RF2\SYS\profile
DIR_GLOBAL = E:\usr\sap\RF2\SYS\global
DIR_CT_RUN = E:\usr\sap\RF2\SYS\exe\runU
Autostart = 1
Start sapcpe
_CP = sapcpe.exe
Start_Program_00 = immediate $(DIR_EXECUTABLE)\$(_CP) list:$(DIR_CT_RUN)\scs.lst pf=$(DIR_PROFILE)\RF2_SCS11_RFIDServer
Start SAP messaging service
MS = msgserver.exe
Start_Program_01 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\RF2_SCS11_RFIDServer
Start SAP locking service
_EN = enserver.exe
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_EN) pf=$(DIR_PROFILE)\RF2_SCS11_RFIDServer
Please Help
best Regards

Hi first thanks you all.
I check the dev.jcontrol as below.
[Thr 3144] Wed Apr 27 23:26:08 2005
[Thr 3144] ***LOG Q0I=> NiPRead: recv (10054: WSAECONNRESET: Connection reset by peer) [ninti.c 777]
[Thr 3144] *** ERROR => MsINiRead: NiBufReceive failed (NIECONN_BROKEN) [msxxi.c      2488]
[Thr 3144] *** ERROR => MsIReadFromHdl: NiRead (rc=NIECONN_BROKEN) [msxxi.c      1652]
[Thr 3144] Wed Apr 27 23:26:09 2005
[Thr 3144] ***LOG Q0I=> NiPConnect2: SiPeekPendConn (10061: WSAECONNREFUSED: Connection refused) [nixxi_r.cpp 8588]
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 2864] Wed Apr 27 23:26:10 2005
[Thr 2864] JControlDPMessageFunc: Thread 2864 terminated as handler thread for R/3 dispatcher messages.
[Thr 2856] Wed Apr 27 23:26:12 2005
[Thr 2856] JControlSigInt: signal = 2
[Thr 2856] JControlIStopInstance: shutting down (command: 0)
[Thr 2856] *** ERROR => MsIModState: not_attached [msxxi.c      3658]
[Thr 2856] *** ERROR => Can't modify state (state=6, rc=-3) [jcntrms.c    667]
[Thr 2856] JControlIProcessSoftKill: soft kill of process dispatcher (pid:2876)
[Thr 2856] JControlIProcessSoftKill: soft kill of process server0 (pid:3072)
[Thr 2856] JControlIProcessSoftKill: soft kill of process SDM (pid:3060)
[Thr 3144] Wed Apr 27 23:26:15 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 996] JControlICheckProcessList: process SDM (pid:3060) died (STOPPING)
[Thr 996] JControlIResetProcess: reset process SDM
[Thr 3144] Wed Apr 27 23:26:21 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:26:27 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:26:33 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:26:39 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:26:45 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:26:51 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:26:57 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:27:03 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:27:09 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:27:15 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:27:21 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 2856] Wed Apr 27 23:27:22 2005
[Thr 2856] JControlSigInt: signal = 2
[Thr 2856] *** WARNING => shutdown is active [jcntrxx.c    1439]
[Thr 3144] Wed Apr 27 23:27:27 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:27:32 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:27:38 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:27:44 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:27:50 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:27:56 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:28:02 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:28:08 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 3144] Wed Apr 27 23:28:14 2005
[Thr 3144] *** ERROR => MsIAttachEx: NiBufConnect to sap-aii/3601 failed (rc=NIECONN_REFUSED) [msxxi.c      633]
[Thr 3144] *** WARNING => Can't reconnect to message server (sap-aii/3601) [rc = -100]-> reconnect [jcntrms.c    295]
[Thr 996] Wed Apr 27 23:28:15 2005
[Thr 996] *** ERROR => Can't terminate process (pid=2876,handle=000001F0,err=5) [jstartnt.c   644]
[Thr 996] *** ERROR => Critical error, can't terminate process dispatcher (pid:2876) (rc=-2) [jcntrxxi.c   340]
[Thr 996] JControlICheckProcessList: process dispatcher (pid:2876) died (STOPPING)
[Thr 996] JControlIResetProcess: reset process dispatcher
[Thr 996] *** ERROR => Can't terminate process (pid=3072,handle=000001F4,err=5) [jstartnt.c   644]
[Thr 996] *** ERROR => Critical error, can't terminate process server0 (pid:3072) (rc=-2) [jcntrxxi.c   340]
[Thr 996] JControlICheckProcessList: process server0 (pid:3072) died (STOPPING)
[Thr 996] JControlIResetProcess: reset process server0
[Thr 996] *** ERROR => MsIModState: not_attached [msxxi.c      3658]
[Thr 996] *** ERROR => Can't modify state (state=7, rc=-3) [jcntrms.c    667]
[Thr 996] JControlCloseProgram: started (exitcode = 0)
[Thr 996] JControlCloseProgram: good bye... (exitcode=0)
There is a line"soft kill of process dispatcher (pid:2876)"
I have not installed license of both abap and java
Is the licnese expired?
best regards

WAS SP9 SR1 ABAP+Java Add in installation , j2EE engine is not running

I have completely installed SAP Netweaver SP9 SR1 WAS ABAP+JAVA addin and Installed XI completely. After few days j2EE engine stops running. I have applied the license after requesting from SAP Mareketplace and applied in WAS ABAP using SLICENSE transaction.
Issue faced
1. Tried to connect j2ee engine home page which is showing.
Dispatcher is running but no server connected.
Now I have removed the WAS J2EE installation and removed the client on which WAS j2EE engine installed. After doing this I tested the WAS ABAP which is running fine. Now I am again installing WAS Java addin. Which installed success fully and have seen the j2ee engine server page running. But proceeding further to install JAVA Dialog instance I am facing folloing issues
2. while installation step 8 and 9 as per SAP INSTANCE GUI .
3. And J2EE engine is again stopping.
Can any one help me to install J2ee dialog installation and resolving these issues.
Anand Verma
HCL technologies

Hi Anand,
J2EE Engine has a separate licensing mechanism. If the temporary license expires, the server will shut down every 30 minutes. You install a permanent license using Visual Administrator in service "Licensing Adapter".
In any case, a look into the log files of the engine can provide further information. They are found at
.../<SID>/<INSTANCE>/j2ee/cluster/server<n>/log
Kind regards,
Juergen Kremp

Space Req to Install WAS (ABAP + Java Add in)

Does anyone know the min space required to intsall WAS for ABAP and Java Add in. ? Physical and RAM both ?
-Thanks
Bob

Hi Bob,
Which is the version you are installing 04 or 04S?
In both cases, you can goto
http://service.sap.com/instguides -> Netweaver -> 04 and
04S -> Installation -> Hardware Requirements
For 04 you may need to see the planning guides and not the
installation guides.
For 04s abap+java min 5GB disk space and 1GB RAM is recommended.
Regards
Srikishan

Abap+java stack, users not mapping to portal role.

We have the ABAP+java add-on install.
The UME is by default ABAP engine.
From Portal:
1 I create a portal user, it ALWAYS creates ABAP user in ABAP stack of WAS.
2. I create a portal role, it creates a role in the Portal.
3. When I assign the user this portal role,
having worksets and pages,
I get no pages or worksets shown in the portal page as soon
user logs in.
Can you help configure this so that I could see the pages and iviews inside this workset when user logs in.
Thanks a lot.
PS: posted this in webdynpro-ABAP. no reply came. Sorry to double post.

Hi Mike,
can you check into your WorkSet (or Pages) if you have setting up the Entry Point flag?
PS: Award points for good answers.
Best regards,
Gianluca Barile

ABAP + JAVA system copy

Hi
My enviroment is SAP ECC 6 (ABAP + Java add in though we don't use the Java stack) on Oracle 10g/Solaris 10.
I intend to do a system copy(PRD to QAS) using offline backup/restore method. Is this possible for a ABAP + JAVA system using this method ?
Thanks

> Karan , I'm just wondering I'm i supposed to do two separate system copies in the case ie One ABAP (backup/restor) & the other for Java(export/import)?
Read the system copy guide.
Basically you will
- start sapinst on the source system and choose "database specific method"
- start sapinst on the target system and select the same
Markus

Abap+java abap-user and portal-role PROBLEM?? help

We have the ABAP+java add-on install.
The UME is by default ABAP engine.
From Portal:
1 I create a portal user, it ALWAYS creates ABAP user in ABAP engine.
2. I create a portal role, it creates a role in the Portal.
3. When I assign the user this portal role,
having worksets and pages,
I get no pages or worksets shown in the portal page as soon
user logs in.
Can you help configure this so that I could see the pages and iviews inside this workset when user logs in.
Thanks a lot.

Hi Mike,
You did right,
Just check the Entry Point Property of your iView, page and workset to YES
there are two radio buttons yes and no select the yes one,
you can see your pages afte rlogin with the new user.
Regards
Abhimanyu L

Reg Web AS Java Add in installation un-install

Hi,
I had started un-install of my web abap+java add in sp13 by mistake.
It had proceeded with the un-install for a few seconds after which i had cancelled.Due to this some files would have got deleted. Any suggestions on how to know which files have been deleted and how do we recover them.
Regards
Bharathwaj

Hi,
But is it necessary to have the client as production client in the ABAP system.. ? Is there any notes or doc which validates the same..
Is this standard for all versions of installation.. because i have heard my friends saying that they never got this screen.,. I have to install stack 03 and then upgrade to sp13..
in this scenario it is asking..for the password..
Advice on the same..
Regards
Bharathwaj

How to choose between Web AS JAVA / ABAP / ABAP+Java ??

Hello,
Does any one has an idea, what should be the criteria for choosing the web AS instance for NW Enterprise portal?
let us make it simple......
Can we compare (WEB AS JAVA/ABAP/ABAP+Java ADD-ON) & come up with advantages & disadvantages of the above three ?
Regards
Sunil Kulkarni

Hi Sunil,
I think there is no official statement except that both is possible, it depends on your needs.
But check out these docs:
http://service.sap.com/instguides -> Netweaver 04 -> Planning -> Technical Infrastructure Guide - SAP Enterprise Portal 6.0
and
http://service.sap.com/instguides -> Netweaver 04 -> Installation -> Installation Guide - SAP EP 6.0 (SR1) on WebAS 6.40
there you'll see that also the installation is more complex. Also patching the whole system will take more time as you have to patch also all the ABAP components of the application server.
If you can think of any need to have an ABAP stack on the same system, then make a good decision, because you can't install the ABAP stack afterwards as you can with the JAVA addin.
Regards,
Pascal

SAP Web AS ABAP + Java system

Hello All,
I am looking at the installation guide of SAP XI. I did not understand one thing from that guide. it says
"If you want to install the component SAP Exchange Infrastructure:Prepare the SAP Web AS ABAP + Java system for SAP Exchange Infrastructure"
I would appreciate if anyone of you can clarify what is SAP Web AS ABAP + Java system.
What I have been thinking all these days is we could have either Java(J2EE) or ABAP Web Application Server.
I don't understand what this ABAP + Java system is ?
Thanks in Advance

Hi Vanaja,
in the world of WAS 6.40 you can install it as three variant.
1. ABAP standalone (with it own SID) e.g. for R/3
2. Java stanalone (with it own SID) e.g. for EP 7.0
3. ABAP + Java as an Add in (Java and ABAP has the same SID)
For XI you have to install a so called double stack WAS 6.40 or SAP Web AS ABAP + Java System or ABAP + Java Add in. All this describe the same variant of the installation.
Normally you will have one database where J2EE-Scheme and
the ABAP-Schema is on the same database. I would really
suggest you to read the installation master SR1 there you
will get the understanding what is the difference.
regards,
Ly-Na Phu

Error while installing the java add-on on abap system

Dear All,
We are trying to install java add-on with EP on present ABAP system, but getting struck up with error as below at creating java users (sapjsf) in central instance installation phase.
ENVIRONMENT:
ECC6.0
WIN 2003
KERNEL 136
SUPPORT PACK LEVEL AT 13
NETWEAVER 2004S SR1.
DB- ORACLE
error: ( usercheck.log)
java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
Exception in thread "main" Reserved 1610612736 (0x60000000) bytes before loading DLLs.
Critical Error
Launching program failed
-> Internal program error (rc = -1)
error: (sapinst.log)
WARNING 2008-08-11 15:00:00
Execution of the command "C:\usr\sap\B60\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install\lib;C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install\sharedlib;C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install" -c sysnr=00 -c ashost=sapserver -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with return code -1. Output:
java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
Exception in thread "main" Reserved 1610612736 (0x60000000) bytes before loading DLLs.
Critical Error
Launching program failed
-> Internal program error (rc = -1)
INFO 2008-08-11 15:00:00
Removing file C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\dev_UserCheck.
ERROR 2008-08-11 15:00:00
CJS-30197 . For more details see output of logfile:
ERROR 2008-08-11 15:00:00
FCO-00011 The step createJSF with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
Please help us out at your earliest convenience.
Thanks and warm regards,

Dear Samrat Dangeti ,
Thanks.
Inst version: 701.
JDK version: 1.4.2_13
Regards,

Error while Installing the Java Add-In for an Existing ABAP System

Hi all,
I need help, i am Installing the Java Add-In for an Existing ABAP System
SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
These are the last few lines on the sapinst.log.
INFO 2009-05-21 12:35:12
Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:18
Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:19
Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc\tbx.
INFO 2009-05-21 12:35:21
Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
INFO 2009-05-21 12:35:22
Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
INFO 2009-05-21 12:35:23
Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
FCO-00011 The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
Thanks in advance for any help.
Kiran Chebrolu

Hi,
Hope this note would solve your issue, please read carefully and validate with your issue
Note 1032019 - Java Add-In: Error when you create the SCS instance
below notes give your suffice information.
Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
Note 1025789 - RUNR3CMD generates CPF0006
regards
nag

Error while installation of Java add-on with EP on ABAP

Dear All,
We are trying to install java add-on with EP on present ABAP system, but getting struck up with error as below at creating java users (sapjsf) in central instance installation phase.
ENVIRONMENT:
ECC6.0
WIN 2003
KERNEL 136
SUPPORT PACK LEVEL AT 13
NETWEAVER 2004S SR1.
DB- ORACLE
error: ( usercheck.log)
java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
Exception in thread "main" Reserved 1610612736 (0x60000000) bytes before loading DLLs.
Critical Error
Launching program failed
-> Internal program error (rc = -1)
error: (sapinst.log)
WARNING 2008-08-11 15:00:00
Execution of the command "C:\usr\sap\B60\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install\lib;C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install\sharedlib;C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install" -c sysnr=00 -c ashost=sapserver -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with return code -1. Output:
java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
Exception in thread "main" Reserved 1610612736 (0x60000000) bytes before loading DLLs.
Critical Error
Launching program failed
-> Internal program error (rc = -1)
INFO 2008-08-11 15:00:00
Removing file C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\dev_UserCheck.
ERROR 2008-08-11 15:00:00
CJS-30197 . For more details see output of logfile:
ERROR 2008-08-11 15:00:00
FCO-00011 The step createJSF with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
Please help us out at your earliest convenience.
Thanks and warm regards,

Hello. Note 1126481 - SAP installation terminates in step createJSF
Hmmm. but it on UNIX platform...as i can see you have Windows....
Try to check JAVA_HOME and PATH are set correctly ?
Regards.

ABAP+JAVA Add In Licensing

Similar Messages

Maybe you are looking for