ABAP & Java Preview install done. Need Post install steps for XI.
Hi
Please excuse for the most basic question.
From the trial downloads, I've installed the
ABAP and Java and would like to know the
post-install steps for activating and configuring
the Exchange Infrastructure component and
subsequent configuration
I've installed on the local host along with the
Microsoft Loopback Adapter. What should be
the connection parameters for the Visual
Administrator?
Any help is appreciated. Thank U.
Rajendra.
Hi Rajender
I think no question is difficult or basic .The severity depends on whether you know it or not,in other terms your comfort level.
Coming back to your post:Go through the below link
https://websmp103.sap-ag.de/~sapidb/011000358700001697502004E.PDF
Re: XI INSTALLATION and POSTINSTALLATION
If you need the XI configuration guide then visit:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
Any issues feel free to ask
Reward with suitable points:
Similar Messages
-
RE: Need Post installation Steps for solution manager4.0 on Windows/oracle
Hello,
Any body having Post installation steps for solution manager4.0 on windows/oracle. Can you please send me to my mail id. Its very helpful.
Id: [email protected]
Thanks,
Regards,
venkat reddy.Hello Venkat,
You may get the information in SAP Note 918078 and also https://websmp206.sap-ag.de/instguides under the Solution Manager 4.0 tree.
Basically after the installation,
1. try to stop and start the SAP System
2. you need to check if you can access the SAP System.
3. Apply the permanent SAP license
4. Perform the configuration via IMG; Tcode SPRO(guide in https://websmp206.sap-ag.de/instguides)
Hope this could help you.
Regards,
AZLY -
Post installation steps for PI 7.0
Hi,
Can anybody send me the Post installation steps for PI 7.0?
Thanks in advance..
~KumarHello,
<br><br><br>
We did PI Installation recently and version is 7.1
<br><br><br>
Steps are as under...
<br><br><br>
<br>1. Basic PI installation</br>
<br><br>2. System checks after basic installation
<br>a. SM50
<br>b. SM21
<br>c. ST22
<br>d. SM12
<br>e. SM13
<br>f. SM37
<br><br>3. Unlock the 001 client for cross-client changes temporarily and set system timezone (STZAC)
<br><br>4. Change 001 client settings back to no changes allowed.
<br><br>5. Create BASIS team member accounts in ABAP Stack and assign SAP_ALL.
<br><br>6. Set directory permission for \usr\sap\trans directory on Transport Domain Controller system.
<br><br>7. Import profiles (RZ10)
<br><br>8. Add the 4 following entries in to the instance profile and restart instance(RZ10)
<br>a. DIR_TRANS =
hostname.domain.ext\sapmnt\trans
<br>b. icm/host_name_full = hostname.domain.ext
<br>c. login/system_client = 100
<br>d. icm/server_port_0 = PROT=HTTP,PORT=5<sysno>00,TIMEOUT=1800,PROCTTIMEOUT=1800 {SAP Note 1107808}
<br><br>9. Configure TMS in transport domain controller{PI DEV} (STMS)
<br>a. Add virtual system
<br>b. STMS in newly installed system and configure proper transport domain
<br>c. In domain controller approve the new system (STMS -> SAP system -> Approve)
<br><br>10. Get maintenance certificate and SAP license from service marketplace and apply in to the new system {ABAP and JAVA} (slicense and NWA)
<br><br>11. Kernel Update JSPM
<br>a. JSPM update
<br>b. Kernel update
<br>c. BC-FES-IGS update
<br><br>12. Support pack installation ABAP
<br>a. SPAM update
<br>b. Support packs update
<br><br>13. Support pack installation JAVA
<br>a. Apply support pack stack
<br>b. Apply support pack patches
<br>i. After JVM installation Error occurs apply MS windows KB973544 {SAP Note 1367498}
<br>c. Restart JSPM and continue patch installation
<br><br>14. Client copy from client 001 to X00 using profile SAP_ALL
<br><br>15. Create logical system and assign it to new client (SALE)
<br><br>16. Change UME target in JAVA to client X00.
<br>a. Enter URL as http://hostname.domain.ext:port/nwa
<br>b. Management -> Infrastructure -> Destination
<br>c. Logon data TAB change client to X00
<br>d. Restart JAVA Instance
<br><br>17. Create following users
<br>a. PIAFUSER, PIRWBUSER, PIISUSER, PIDIRUSER, PIREPUSER and PIAPPLUSER on the target SLD and new system manually and assign role/group SAP_SLD_CONFIGURATOR to them. {SAP Note 1309239}
<br>b. PISUPER in new system and assign appropriate roles in ABAP and JAVA
<br>c. SLD_DS_<SID> and SLD_CL_<SID> on target SLD {Use source system master password}
<br>d. JCoRFC_<SID> in new system
<br>e. Sapadm user in new system
<br><br>18. Assign roles and groups to BASIS team on JAVA Stack
<br><br>19. Create PUBLIC logon group (SMLG)
<br><br>20. Configure SLD collector job as sapadm (RZ70)
<br><br>21. Run Configuration Wizard
<br>a. Enter URL as http://hostname.domain.ext:port/nwa
<br>b. Configuration management -> Scenarios -> Configuration Wizard
<br>c. Select Initial Configuration and click Start.
<br><br>22. Create the JCoRFC connection.
<br>a. Enter URL as http://hostname.domain.ext:port
<br>b. Web Dynpro -> Content administrator -> Maintain JCo destination
<br>c. Fill in information for the following 4 entries using client X00 and JCoRFC_<SID> as the user {Make sure you note the distinction between Metadata and Model destinations when you are creating the destination}
<br>i. WD_ALV_METADATA_DEST
<br>ii. WD_ALV_MODELDATA_DEST
<br>iii. WD_MODELDATA_DEST
<br>iv. WD_RFC_METADATA_DEST
(Use dictionary Meta Data for the Metadata connections, use Application Data for the Model Data connections.)
(Use the master password for EXQ)
<br><br>23. Repeat for the remaining 3 JCo RFC destinations.
<br><br>24. Run PI Full Qualified Host Name Wizard {SAP Note: 1320707}{Make sure you check the host names for integration server and SLD}
<br><br>25. Create RFC destination in to ERP target system (SM59)
<br>a. Give Name PI_INTEGRATIONSERVER
<br>b. Connection type H
<br>c. In Technical settings TAB provide
<br>i. Target host = hostname.domain.ext
<br>ii. Path Prefix = /sap/xi/engine/?type=entry
<br>iii. User information is blank
<br><br>26. Setting SXMB_ADM ERP target system
<br>a. Open Integration engine configuration
<br>b. Goto -> Change Global Configuration Data
<br>c. Role of Business system = Application System {This is optional}
<br>d. Provide RFC destination name in Corresponding Integ. Server = dest://PI_INTEGRATIONSERVER
<br><br>27. Schedule Standard Jobs as SAPADM in client X00.
<br><br>28. SICF service to activate
<br>a. /default_host/sap/public/bc/pictograms
<br>b. /default_host/sap/public/bc/webicons
<br>c. /default_host/sap/public/bc/its/designs
<br>d. /default_host/sap/public/bc/workflow
<br>e. /default_host/sap/bc/ccms
<br>f. /default_host/sap/bc/webdynpro/sap/CTS_BROWSER
<br>g. /default_host/sap/bc/webflow
<br>h. /default_host/sap/bc/workflow
<br>i. /default_host/sap/bc/workflow_xml
<br>j. /default_host/sap/bc/xmb
<br>k. /default_host/sap/bc/ping
<br>l. /default_host/sap/xi/wsdl_sr
<br>m. /default_host/sap/xi/wsdl_url
<br>n. /sap/bc/webdynpro/sap/appl_soap_management
<br><br>29. Adjusting JNLP Heap size
<br>a. Open the Exchange profile through the link u201Cadministrationu201D from the web page of the Process Integration tools.
<br>b. Under the folder u201CIntegration Builderu201D click on the variable u201Ccom.sap.aii.ib.clientjnlp.j2se.maxheapsizeu201D
<br>c. Value = 1024
<br>d. Save the change and restart the J2EE instance of PI so that the new value can take effect.
<br><br>30. Create RFC destination for Advanced Adaptor Engine in sender ERP system(SM59)
<br>a. RFC Destination = AAE_<SID>
<br>b. Connection type = G
<br>c. Target Host = Host Name of AAE Server {PI Server}
<br>d. Service No. u2013 HTTP port number of AAE Server
<br>e. Path Prefix = /XISOAPAdepter/MessageServlet?ximessage=true
<br>f. Under Logon & Security use PIAPPLUSER with PI target systemsu2019 master password.
<br><br>31. Create RFC destination <SID>_ALE in ERP Source system with user ERQALEUSER {Make sure you have this user created in new installed system}
<br><br>32. Install External Driver Configuration in Process Integration 7.1 Using JSPM {SAP NOTE: 1138877}
<br><br><br>
Please let me know if I am missing anything there...
<br><br><br>
Cheers,
<br>
Yogesh -
HI Friends,
I have upgraded my EP from 6.0 to 7.0 successful with all component. ALos i am getting login screen. SO what are post upgrade step for EP.
Thanks,
Regards,
SachinHI ,
System restart
run the SICK verify the installation check
Check developer traces on the operating system. Log on to
Check the installed license and profile configuration (RZ10 and PFCG)
confirm the operation modes
Perform a client copy
Check the status of the SAP Web AS Java and the user SAPJSF
Check the rdisp/j2ee_start profile parameter
Check the current state of SAP Web AS Java using transaction SMICM
SAP Load Generator
Start SAP Load Generator (SGEN)
Regards, -
Post Installation Steps for ERP add-on Inventory Manager 4.0
Hi,
I need to confirm what are the post-installation activities we must to perfom for ERP Add-on (Inventory Manager 4.0), besides de BC Activation. I did not find any information regarding the post installation steps for the ERP Add-on of Inventory Manager 4.0 (the installation guide for IM 4.0 on service marketplace does not remark the steps only explain the theorical part of the installation)... And we need to confirm if the steps are the same of Inventory Manager 3.2 Add-on or we must do an additional step?
Best Regards,
MC
Stephen Streeter Manju VenkateshaYeah...of course...
I forgot to specify it.
I install the first ERP 2005 SR2 on Oracle 10.2.0.2 and the other have to be installed on the same version of DB.
All installation are not MCOD.
This mean every installation has its own DB with different SID for every installation.
And of course I have at least doubled the space required by installer. Taken from sap notes the required space for ERP 2005 SR2 is about 90 GB.
The total space of mount point is about 500 GB....
Thanks
Dan -
Post Installation steps for Solution Manager 4.0
Hi Experts,
Please can you guide me if there are Post Installation steps for Solution Manager 4.0!If so can you explain me.I have successfully installed the SolMan 4.0.
Thanks & Regards
SunilHi
In installtion guide you can find the information you needed also check
Visit for step by step details of Standard Configuration of Basic Settings
www.service.sap.com/rkt-solman->select solution Manager 7.0>technical Role-->Technolagy
&system administartion just drill out there you can find lot of simulator how to install and
configure solution manager
https://websmp109.sap-ag.de/~sapidb/011000358700000424922008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000525622007E.sim
and for Maintenance optimizer setup
https://websmp109.sap-ag.de/~sapidb/011000358700000086852008E.sim
https://websmp109.sap-ag.de/~sapidb/011000358700000086862008E.sim
Let me know if needed more information
Regards
Uday -
Post installation Steps for SAP XI
Hi,
I am doing post installation steps for SAP_XI, for the step "Generating roles for SAP_XI and SAP_SLD in transaction PFCG, when I enter Role: "SAP_XI*" then its not generating any roles it is giving message "No roles found in the selected area" Please suggest
Thanks,
NishantCreate user in SAP XI and then assign them role
Create user using SU01 transaction. Enter the username and click on the first button (create).
Follow the process below
1. Address Tab
Enter the user details
2. Logon Data Tab
Enter the initial password. Make sure user type is Dialog (it is by default).
3. Roles Tab
SAP_XI_DEVELOPER
SAP_SLD_DEVELOPER
SAP_XI_MONITOR
(if the user is admin give the admin roles)
Before logging on to the Integration Builder, logon to ABAP stack (SAPGUI frontend on windows or java) at least once. Then logon to Int.Builder components.
regards
Dharamveer -
What are the post installation steps for sap 4.7ee
what are the post installation steps for sap 4.7ee
Hi,
Post installation steps are as follows.
1.SICK to be run first to checkt the errors while installation.
2. Install SAP GUI
3. Set up the TMS. Configuration the domain controller through SE06 and then set up the transport system through TMS.
4. Change the default password of SP* and DDIC.
5. Set up the operations mode using RZ04 and SM63.
6. Apply patches through SPAM.
7 Schedule default background jobs through SM36.
8 Import default profiles through RZ10.
9. Schedule backup calender through DB13.
10. Create clients using SSC4
11. Install lisence
12. Schedule SGEN -
Post Installtion steps for PI 7.1
Hi..
we have completed the PI 7.1 Installation, can you please provide the Post Installation steps for this PI 7.1
Thanks in advance,
Pasi.Hi..Prateek,
I checked with Basis Team they are saying that they have done this Post Installation Steps.
When i am trying to open the Integration Builder (SXMB_IFR), i am getting the msg is " Enterprise Service Builder Address not mentioned " .
how to solve this ?
Thanks in advance,
Pasi -
Post Installation steps for Messages archiving from Adapter engine
Hi,
Can any let me know the post installation steps for Archiving messages from AE.
We are archiving the messages from Integration Engine (BC_XMB).
This note refers to the Post installation steps... But i could not find them anywhere.
Note 790226 - Messages in AdapterEngine/PCK database do not get archived
Thanks,
Tanuj
Message was edited by:
Tanuj Kumar BolisettyHi Tanuj,
have a look at note 872388
"2) For messages in the Adapter Framework: note 816022, question 8
(deletion) and
http://help.sap.com/saphelp_nw04/helpdata/en/cf/b2fc3f48ecc742e10000000a
1550b0/content.htm (archiving)"
Additionally consult the troubleshooting guide,page 110
Set the adapter service properties (note 791379)
Hope it helps
Jaime -
Install SCCM Client Post Install via MDT 2013
I want to know best practice on how to install the SCCM client via MDT 2013 as a post install task sequence? Im deploying a lot of machines via MDT offline USB....
Is it grabbing the ccmsetup folder and using the following command line?
ccmsetup.exe /noservice /MP:<insert> SMSSITECODE=<insert> smscachesize=10000There's no such thing as a "best practice" for most real-world tasks; real-world is different for everyone which means you need to know the details and choose the right things for your environment.
You need to run the command-line that is appropriate for your environment just like you would for any manual install.
Without knowing any details about your environment, I would add the SMSMP and FSP properties to the above command-line. If this is truly an offline install, you shouldn't use /mp though, you should use /source and point it at the client directory.
Jason | http://blog.configmgrftw.com | @jasonsandys -
? Linux Install via vncviewer post install ? device xvda was unreadable ?
Thanks in advance:
Using 64 bit new server/ I've successfully installed version 2.1 64bit of VM Server.
During the virt-install --vnc
# mount -o ro,loop /OVS/running_pool/rac1/rhel-5.1-server-x86_64-disc1.iso /el/EL5x86_64
# service iptables stop
# service portmap restart
# service nfs restart
# exportfs *:/el/EL5x86_64
What is the name of your virtual machine? : rac1
How much RAM should be allocated: 8000
What would you like to use as the disk (path)? /OVS/running_pool/rac1/rac.img
How large would you like the disk (/OVS/running_pool/rac1/rac1.img (gigabytes)? 100
Would you like to enable graphics support? (yes or no): yes
What is the install location? nfs:192.168.1.11:/el/EL5x86_64
Then I set the DISPLAY=<client-ip>:0.0
The /etc/exports contains: /el/EL5x86_64 *(rw,no_root_squash)
During the Linux Install
1. I configure the IP for the Guest OS install
2. Configure TCP/IP for the new Guest OS
I Get a Warning on the Red Hat Enterprise Linux 5
The Partition table on device xvda was unreadable to create new partitions it must be initialized, causing the loss of ALL DATA on this drive.
I choose: YES
Because it will not allow me to choose NO
Then I get the following:
Remove Linux partitions on selected drives and create default layout
The Select the drive(s) to use for this installation
I see
Check for xvda 102399 MB Xen Virtual Block Device
Then I get the ERROR:
The file system-config-services-0.9.4-1.el5.noarch.rpm can not be opened.
I appreciate advice heterthe rpm package, system-config-services-0.9.4-1.el5.0.1.noarch.rpm is not in the first disk,but in second ISO file.
.../Enterprise-R5-U1-Server-x86_64-disc2.iso/Server/system-config-services-0.9.4-1.el5.0.1.noarch.rpm
so you need change to second ISO file. or you may download EL5.1 DVD,and need not switch iso file since all rpm packages in one ISO file. -
POST Installation steps for SAP XI 7.0 SP06
Hi Experts ,
We are trying to install XI 7.0 SP06.We are suppose to carry out post installation
steps but we are not able to locate a proper post installation guide for the same.
We have succesfully installed XI 3.0 earlier .However XI 7.0 post installation steps in the guide that we have "SAP NetWeaver 2004s SR1 ABAP+Java on Windows: Oracle" , are relatively less...
Nevertheless, we have carried out the following steps
5.21.1 Performing PI-Specific Steps for SLD Configuration
Local and Central System Landscape Directory (SLD)
Mapping Security Role to User
1. Log on to the Visual Administrator of the J2EE engine of the SLD host.
2. Choose Cluster® Server® Services® Security Provider.
3. In the Runtime tab, choose Policy Configurations and then the column Components, and select the component
sap.com/com.sap.lcr*sld.
4. Switch to the Security Roles tab to display the assigned roles.
5. Select role LcrInstanceWriterLD.
The user SLDAPIUSER already exists with its security role LcrInstanceWriterLD.
6. Switch to edit mode and add user PIAPPLUSER with the same role LcrInstanceWriterLD.
Note
For a central SLD, the user PIAPPLUSER must be created in the central SLD ABAP system first and be
assigned to ABAP role SAP_XI_APPL_SERV_USER. The password must be same as in the XI Exchange
Profile on the XI Integration Server.
Note
For information on the UME actions, see the Post-Installation Guide - SLD of SAP NetWeaver 2004s, section
Configuring SLD Security, at service.sap.com/sld® Media Library.
Maintaining SLD Connection Parameters (ABAP API)
1. Log on to the SAP XI Integration Server System as user DDIC and call transaction SLDAPICUST. The screen
Maintain SLD Access Data is displayed.
2. Choose Display <-> Change and proceed as follows:
a) Replace the existing SLDAPIUSER with PIAPPLUSER user.
Note
For a central SLD, make sure you use the user with security role LcrInstanceWriterLD.
b) Make sure your entry is marked as Primary.
Note
Only the entry marked as Primary is active.
c) Save your settings.
April 10, 2006 PUBLIC 97
Now we don't know wether the sld configuration is over or not ...or for that matter in RWB we see only J2se based adapter engine and not J2ee based adapter engine...
Kindly helpHi..
Instaed doing this,please try out template based configuration which has been mentioned in the installation guide or else do as follows
1.Login into NWA (netweaver administrator)
as
http://<host.<domain>.<com>:<port>/nwa
2.Use J2ee_admin user id and password
3.go to deploy and change
4.select template based configuration for PI
5.execute the template
6.install it
you can find the list of other templates which are clear and easy to do the post installation step..i found it useful ..
Apart from these, as per sandro, you can check the data transfer in visual administrator or go the abap engine, transaction RZ70, press accept proposal button
then execute button , check the data supply without any error
Thanks
Gopal
(Avoid points if useful) -
Post installation steps for EP 7.0
Hi All,
I have installed EP 7.0 SR1 on windows with Oracle and its successful. (I have selected usage types Java and EP during installation).
As per the installation guide its said to login as below:
http://<hostname>:50100/irj --> but when i open it, it says The requested resource does not exist. But i am able to open normal NW page: http://<hostname>:50100 and access UME, SAP NW Administrator>..
I have applied permanent license in Visual Administrator. but didnt do any of the post installation steps. I didnt see any of the post installation step in guide also, could you please guide me in completing this?
Thanks,
SubbuHi All,
Thanks for ur response, i am able to open the portal by giving the address as u mentioned..thank u..But i am facing problem as i couldnt see some options: I read the following in help.sap.com
When you install a portal, you also install predefined system templates for all the connectors that the portal provides. These templates are contained in the System Landscape Templates folder, under
System Administration--> System Configuration --> Portal Content --> Templates
, and can be edited in the Property Editor. Editing a template affects any systems that you create based on this template
I am able to navigate System Administration--> System Configuration but not able to see the option
Portal Content --> Templates
The other point mentioned is:
The system administrator can disable logon by means of the IP address as follows:
Navigate to System Administration --> System Configuration -->
Service Configuration
. i m not able to find the option Service Configuration here??
I have installed NW 2004s SR1, in help.sap.com they didnt mention anything specific abt. release. Could you please guide me why i am missing those options??
Thanks,
Subbu -
Post Installation steps for Solution Manager 4.0 SP10
Hi,
Can any one of you help me out to do the post installation steps to be done after installing solution manager.
Thanks in advance.
Thanks
VenuHi Dolores,
I am not able to find iTutor anywhere in service.sap.com/rkt-solman.
Could you please give us the perfect path for that?
Regards
Pranav
Maybe you are looking for
-
Can't read big name of folders by script
It happens once in a while that the images we had edit and are ready to save give us an error saying that the File I want to saveAs can't be found. So, in this case, we had to save manually each image, rename the folder to a shorter name mannually, r
-
Controller for .swf and .flv files is disappearing
When I place an .swf or .flv file in Dreamweaver, the controller, which I created in Flash, disappears when previewed in Safari. Do I forget about creating a controller in Flash before exporting to the site directory in Dreamweaver and create it in D
-
Having clause with Analytic function
can you pls let me know if we can use HAVING clause with analytic function select eid,empno,sum(sal) over(partition by year) from employee where dept = 'SALES' having sum(sal) > 10000I m getting error while using the above, IS that we can use HAVING
-
Hi there, Is it possible to subtract the values of two rows in a pivot table and show as the third row if we can assure that there will always be only two rows in the pivot table? Pivot table view: h2. Year M01 M02 M03 Q01 Total_ *2009* 49
-
We purchased CSA-START-6.0-K9. We did not install anything yet. Now we want to use agent 6.0.1, not just 6.0. I believe there are two possible scenarios: 1. Install 6.0 and then upgrade it to 6.0.1. In such a case, will the upgrade use the same old l