Abap+java stack, users not mapping to portal role.

We have the ABAP+java add-on install.
The UME is by default ABAP engine.
From Portal:
1 I create a portal user, it ALWAYS creates ABAP user in ABAP stack of WAS.
2. I create a portal role, it creates a role in the Portal.
3. When I assign the user this portal role,
having worksets and pages,
I get no pages or worksets shown in the portal page as soon
user logs in.
Can you help configure this so that I could see the pages and iviews inside this workset when user logs in.
Thanks a lot.
PS: posted this in webdynpro-ABAP. no reply came. Sorry to double post.

Hi Mike,
can you check into your WorkSet (or Pages) if you have setting up the Entry Point flag?
PS: Award points for good answers.
Best regards,
Gianluca Barile

Similar Messages

Java Stack is not started in SAP netweaver ABAP+JAVA Stack

Dear All,
Win2003 64 bit , ECC6.0 , Oracle 10.2.0.2.
Its a newly installed SAP Netweaver Dual Stack (PI) , Yesterday i have done Client copy from 001 to 999 (SAP_UCUS).
Client copy also successfully completed .
login/system_client=999 ,i have activated in Default profile and i have restarted the Server.
Now i dont have issue with ABAP stack ,its working fine, but java stack is not working running.
std_output0.out log:
Service com.sap.aii.adapter.mail.svc started. (812 ms).
Service com.adobe~XMLFormService started. (2937 ms).
Service com.sap.aii.af.ispeak.svc started. (390 ms).
ServiceManager started for 73719 ms.
Framework started for 85781 ms.
SAP J2EE Engine Version 7.00 PatchLevel is running!
PatchLevel September 11, 2006 16:35 GMT
>
Login :### Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.TypeMappingImpl::initializeRelations
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.GeneratedComplexType::_loadInto
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readSequence
Excluding compile: com.sap.engine.services.webservices.jaxrpc.encoding.InstanceBuilder::readElement
SAP J2EE Engine Version 7.00 PatchLevel is shutting down! PatchLevel September 11, 2006 16:35 GMT
=================
C:\Documents and Settings\ixdadm>jcmon pf=D:\usr\sap\IXD\SYS\profile\IXD_DVEBMGS
00_SAPXIDEV
[Thr 4576] MtxInit: -2 0 0
============================================================
JControl Monitor Program - Main Menu
============================================================
0 : exit
10 : Cluster Administration Menu
20 : Local Administration Menu
30 : Shared Memory Menu (Solid Rock, experimental)
command => 20
Can't open shared memory administration (rc = -107)
============================================================
Kindly suggest .
Edited by: satheesh0812 on Dec 30, 2010 12:00 PM

Hi,
Please provide the full log entries of server0_out.log.
You can access UME service properties in config tool by following this path..
Global server configuration -> services -> com.sap.security.core.ume.service
There you can set the following settings for new client 900 (it u want to change it)
ume.r3.connection.master.client
ume.r3.connection.master.user
ume.r3.connection.master.passwd
Refer this [useful link|http://help.sap.com/saphelp_nw04s/helpdata/en/45/1bbdccc7850064e10000000a1553f7/frameset.htm] to get more detailed information. Refer [Config Tool actviities|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0a3d713-5ab6-2c10-ddb1-e7487bc33384?quicklink=index&overridelayout=true] link To get more information.
Also, Make sure that the Users J2EE_GUEST, J2EE_ADMIN, SAPJSF ABAP Users exist in the ABAP client (i.e. client number as mentioned in ume.r3.connection.master.client ) and they are not locked. All the required roles need to be assigned properly.
Regards,
Bhavik G. Shroff
Edited by: Bhavik G. Shroff on Dec 31, 2010 2:58 PM

Whats the difference between ABAP stack, ABAP+Java stack and Java stack

Hello,
I have a nagging doubt about the difference between the ABAP stack, ABAP+Java stack & the Java only stack. I believe that the method of applying the kernel for all the 3 types is different.
Also can we apply the ABAP support packs through JSPM.
Please put some light on this.
Thank you

Hi Zaheer
ABAP Stack
AS ABAP is used to provide the ABAP foundation of SAP NetWeaver.
Part of AS ABAP is the Search Engine Service (SES), which enables users to search for
business objects using Search and Classification (TREX). SES accesses Search and
Classification (TREX) functions through the Search and Classification (TREX) ABAP
client. SES replicates the business objects from the ABAP application to Search and
Classification (TREX), so that it can apply Search and Classification (TREX) search
functions to them. When a user enters a search query, the Search and Classification
(TREX) system responds to it, not the database for the ABAP application. For more
information, see the document Installation Guide SAP NetWeaver TREX Single Hosts /
Multiple Host.
Java stack
AS Java is used to provide the Java foundation of SAP NetWeaver. Among the key
capabilities of AS Java are:
J2EE Engine a J2EE 1.3-compliant application server for running enterprise
applications. In addition to the pure J2EE standard technologies, the J2EE
Engine implements complementary technologies, such as Web Dynpro or Web
Services, that are targeted at supporting large-scale, real-business application
development projects.
SAP Composite Application Framework Core (CAF Core) is a service-oriented
architecture for building and deploying composite applications. It enables
modeling of different service types entity services that represent a domain
model, application services that implement business logic, and external
services that offer connectivity to back-end services by means of remote
function calls (RFCs) or Web services. Usage type AS Java comprises the CAF
Core runtime environment, while design time tools are part of the SAP
NetWeaver Developer Studio.
Web Dynpro is the user interface technology for developing professional
business applications for mobile as well as for desktop clients. Web Dynpro
applications can easily be integrated into SAP NetWeaver Enterprise Portal,
providing a unified layout for the end user as well as enhanced navigation
support. Web Dynpro also allows, for example, the development of interactive
forms using the Adobe document services.
Adobe document services is a set of runtime services that provide a range of
form and document creation and manipulation functions such as:
Converting XML form templates (created using Adobe LiveCycle Designer)
to PDF and various print formats
Setting Adobe Reader rights to enable users to fill in and annotate forms,
save and print them locally, and include digital signatures for authentication
using the free Adobe Reader software
Extracting data from SAP applications into Interactive Forms and transferring form data
back into SAP applications using XML
ABAP + Java Stack
Contains both functionalities.
I hope this helps
Regards
Chen

Abap-java stack connectivity

Hello,
i have a BI 7 system - abap+java stack
the java stack is supposed to be configured to work against client 001 in the abap system
apperently this is not the case
usually it is configured from the http://<host>:<port>/nwa ->identity management but i can't login to the java/portal - the login screen is jumping again and again no matter which user name i put
can anyone advise where is the java client in the abap stack (usually 001) is configured?
Regards,
Moshe

Hi,
Yes for default Central Services Installation the java stack will point to 001 client.
Just check the certificate in the key store(in visual admin), this error generally occurs when the certicate gets expired. If it is the case then delete the certificate and create an new one then import the certificate in the abap stack.
Regards,
Vamshi.

How to create Roles in UME (ABAP+JAVA stack)

Hi,
I have created roles earlier on JAVA stack alone. However, this time I am working on JAVA+ABAP stack. When I am trying to create role in UME, I am getting only two tabs:
General Information
Assigned Groups
I am not getting Assinged Actions tab here.How do I assing actions ?
Can any one please help me in creating roles in ABAP+JAVA stack.
That would be a great help!
Regards
Faisal

HI Faisal,
When ABAP is the UME, you can only edit users / groups that are J2EE only. Any group that is defined in ABAP is read-only for the Java Server to prevent conflicts (there is no synchronization) and has to be changed in ABAP.
Please take a look at this link, which has a great graphic describing this.
http://help.sap.com/saphelp_nw04s/helpdata/en/7c/36dcd59865b246b993c471199ba37a/content.htm
So, if the Java group was created in ABAP, the ABAP user has to have the ABAP role assigned to him, so that he is in the group on the Java server. make sense? The graphic in the link above really explains it well I think.
If you a new / custom Java group (not in ABAP) then you should be able to assign users to it from the Java server.

ABAP+JAVA STACK STARTING ISSUE a Work Around

Dear Users,
I recently got an issue in duel stack where in Java stack was not coming up. According to the Trace file i was about to follow the SAP Note: 940893. But everything was fine for me. Then i tried a work around. I started Java first and then after sometime ABAP. It worked for me. Might be useful for others as a work around. If useful make know. If i am wrong again let me know.

Hi Manjesh,
Then i tried a work around. I started Java first and then after sometime ABAP. It worked for me.
It looks like Server has insufficient memory to hold ABAP+ JAVA stack.
You can think of the following
1) Reduce the no of WPs in ABAP stack
2) Reduce the JAVA memory settings to half using configtool
3) Restart both ABAP and JAVA
4) Check the results.
Hope this helps.
Regards,
Deepak Kori

ABAP & JAVA stacks

There are lots of post regarding ABAP & JAVA stacks. I am not sure if I see a consolidated answer anywhere. Also I don't see overall architecture diagram explaining just the stack part.
Here is my understanding after reading/researching, forums, help, blogs and other documents.
ABAP Stack:
-Integration Engine (IE) {This is where the message pipeline happens}
-Business Process Engine (BPE)
-ABAP Mapping
-XSLT Mapping
-IDOC Adapter
-Http Adapter
Java Stack:
-Adapter Engine (AE)
-Integration Builder, SLD, RWB
-Standard Mapping
-Java Mapping
-XSLT Mapping
Is this correct, am I missing anything else?
Thanks
Message was edited by: xi_ted (updated based on Vijaya Kumari's, Michal's and Agasthuri' responses)

Hi,
IDoc and HTTP adapter are on ABAP stack all other Adapters are JAVA stack, Since IDoc and HTTP adapter are on ABAP stack they no need sender agreement.IR,ID,SLD,RWB are in Java Stack.
Regards
Agasthuri Doss

ERP 2005 application server on Solaris 10 T2000 ABAP & Java stacks

We are interested to know if there are any companies running Sun T2000 servers, Solaris 10, in the application layer for both ABAP & Java stacks. If so, how are they performing?
Regards,
Cheryl Siebert.

We just had several technical discussions with SAP regarding their new server technology and Solaris 10 capabilities. They told us that the T2000 works well for web application servers (e.g., Enterprise Portal). They are optimized for Java. They don't do well as R/3 application servers. They recommended using V240s or v40z's as R/3 app servers (you could also explore using X86 servers running either Linux or Solaris). We are also exploring the potential of using the M5000 as a DB server to reduce the cost of our Oracle licenses (we are not using the runtime Oracle licenses from Sun - don't ask).
Darryl Vegh

Config guide to configuer the SLD on ABAP+Java Stack

Friends,
Can you please pass me the guide to configuer the SLD on the ABAP+Java stack. My email id is : [email protected]
Thanks!
Vivek.

Check this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07753b9-fa0c-2a10-64a8-c6754c45396e
Regards,
Prasanna Krishnamurthy

System Copy from ABAP Stack to ABAP+Java Stack

Hi,
Is it possible to system copy (homogeneous or heterogeneous) from a system based on ABAP Stack to a system based on ABAP+Java Stack? Is it the normal system copy procedure or something aditional is required to do. Pl. advise. Thanks
regards
Edited by: Abdus Samad on Oct 24, 2008 8:13 AM

It depends on what you want to copy, a system copy will always wipe out the existing target. But if you want to only copy data, you might be able to do a client copy. You can start with this SAP note: [552711 - FAQ: Client copy|https://service.sap.com/sap/bc/bsp/spn/sapnotes/index2.htm?numm=552711]
Regards Michael

License Problem in Abap+java stack

Hello,
I have installed my SAP XI/PI System with ABAP+JAVA Stack.
I have applied SAP license at ABAP Stack using slicense for web as abap+java, so is there any need to apply license again for java stack, because when i am checking in Visual Admin under license node , it is showing license is not installed.
If it is not required then why it is showing in Visual Admin tool that license is not installed. can some one give me guidance on this issue.
Best Regards,
V.Singh

Hi,
No restart will not make any difference.
You can overlook this. If in the /nslicense screen you see a permanent license, then no need to worry furthur..
Also in the system info page , you will see:
Software Product :Days Until Expiry
Hope this helps.
Kind regards,
hemanth

SAP ECC 6.0 EHP4 installation with ABAP+JAVA stack

Hi,
I need to install SAP ECC6.0 EHP4 with ABAP+JAVA stack on windiws server 2008 with oracle.
I have read that for this, we need to install ECC 6.0 EHP4 ready and then upgrade to EHP4 using ehpi installer.
I have found the documents seperately for ABAP and JAVA stack and not for ABAP+JAVA.
I need clarifications on these.
1.Do we need to install ABAP and JAVA instances seperately with EHP4 and then upgrade(In that case I have to install both instances on single host)?
2.Should we give seperate <SID> for both instances and create seperate databases?
3.Hard disk requirement for this set up.(We have 150 GB including C drive)
4.Steps to perform after installing ECC6.0 EHP4 ready
5.Please send me the doc. if anyone has
Anyhelp would be highly appreciated.
Regards,
Surya

> 1.In the installation document for EHP4 ready for SAP ERP 6.0 ABAP.It is mentioned that this installation contains only basic EHP4 for ERP 6.0 and we need to install additional EHP4 functionality in the SAP ERP 6.0 -EHP4 ready system.
> It states that atleast Support pacakge stack (SPS) 1 of SHP4 needs to be installed.So If I install this stack using EHPi installer in the post installation activities my SAP ERP 6.0 EHP4 will be in place?Please confirm.
Yes..
>
> 2.Can I install SAP SR3 with dual stack and upgaradte it directly to EHP4 at a time?
Yes you can do it.....as SAP still supports dual stack ERP systems to EHP4
>
> Any solutions or suggestions from others also welcome.
Why do u want a dual stack ECC ystem?? any specific requirement???
Regards,
Nirmal.K
Edited by: nirmal konchada on Feb 2, 2011 12:16 PM

Abap+java stack

Hi,
My sap is running on ecc6.0,linux with maxdb(abap+javastack) we are taking backup through database manager in tape.while restoring it will ask any java files.
Thanku

Hi
Thanks alot for ur quick response.
If I want to follow SAP System copy(export/import) procedure using sapinst tool , I need to shut it down the SAP instance , which is not possible everyday.
Is there any way out to take backup of ABAP+JAVA stack to tape and restore in another machine using last sucessfull backup using backup/restore procedure(Database Manager).
How can I take backup of ABAP+JAVA stack without shuting down the SAP Instance by using any sap standard tools (sapinst) and can be used to restore in any new machine in case of emergency?
ThankU

ABAP / Java stack refresh

Does anyone have documentation on how to do a refresh for an ABAP / Java system? I've done a system copy to create a new system with SAVLIB/RSTLIB by:
Export the SDM
Saved ABAP Database
Saved Java Database
Run the system copy with RSTLIB option on the target system, but when I did this, the system didn't already exist on the target side.
But if I have a development system (say abc) and want to refresh it with production (xyz), how would I do this with the addition of a java stack?
We have documentation and have done this plenty with just an ABAP stack, but not so with an ABAP/JAVA stack.
I would think if I tried to use the system copy method mentioned above it would error because the target system (abc) already exists.
Can anyone clarify for me? Thank you.
~TJ

Hi TJ.
Looks like your question is not specific for SAP on System i. Most likely you get more answers when you ask it in an platform independent forum. I would suggest the SAP NetWeaver Application Server forum.
But I think it would be very interesting for many of us here in this forum to let us know if there is a easy way to accomplish the refresh.
Best regrads,
Jan

Abap+ java stack or Abap stack

Hi All,
How to know whether a system is ABAP+ JAVA stack or JAVA stack.
In our system EP6.0 which is JAVA stack holds JC00 which is a java instance direcory. In BW system we have SCS20 and Dvebg...00 directories is it ABAP+ JAVA stack or ABAP stack with J2ee engine services.
Please suggest me...
Thanks,
Subhash.G

In the forder structuer usr\sap\<SID> if you have DVEBMGS<XX> then it's ABAP and if it's JC<XX>, then it's JAVA. Also if under DVEBMGS<XX> you have j2ee and SDM folder then it's a dual stack that is both ABAP and JAVA.
As for the URL if it's a dual stack then using the browser use the user j2ee_admin and the specified password, else if it is only java then use administrator user and the specified password.
If it's a dual stack you can also login using sapgui.
If in case its single stack AS_ABAP
THere will one be a single node i.e. no message server and enque server. The folder stur would be /usr./sap/<SID>/ and tou would find
DVEBMG SYS folders only.
IF in case its single stack Java server then
In mmc. you will find, 2 nodes one for message server, enque server and the other for the SDM, dispatcher and server0
the foder struct would be
/usr/sap/<SID?
JC><CIno> SCS<no>
Now in case if you have double stack i.e. AS-java and AS-ABAP you would will find these things in mmc
Message server and enque server
disp+work, message server and wp
the folder struct would be
/usr/sap/<SID>/
DVEBMG<no> SCS<no>

Abap+java stack, users not mapping to portal role.

Similar Messages

Maybe you are looking for