ABAP key word documentation  not appearing

Hi every one
when i press F1 on a keyword in ABAP editor it displaying ABAP keyword documentation with blank page.
i am using vista OS and SAPGUI 6.0 and Internet explorer 7.0
Please suggest me what to do to get the Key word help.
Most useful answer will be awarded
Thank you
Kiran

Check transaction ABAPDOCU. This shouldn't be dependent on which version of SAPGUI you have (assuming your sap rel is 4.6 or greater).
Also look in table tstct for transaction abapdocu.
If it doesn't exist then you need to re-install it. Should be part of standard SAP however.
VISTA is irelevant in this regard - however you might need to access the SAP help files via a browser and a manual link as the automatic link doesn't work properly under VISTA unless SAPGUI 7.0 is installed -- as the previous poster has said.
For the SAP library you can always use a manual link to the sap help data files but of course it won't work via F1.
Cheers
jimbo

Similar Messages

  • Is it possible to download  abap key word documentation

    hi experts,
    i want to download all the abap key word documentation.
    i know that if we press f1 on keyword we will get that particuler key word help, but i want all the words document download or copy once.

    I dont think there is a way to download it in that form.
    You can however get the PDF version from here -
    http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
    SAP Library -> Basis Components -> Abap programmng & Runtime Env -> ABAP Programming.
    You can save this PDF on your PC .
    Cheers.

  • ABAP key word documentation

    Hi every one
    I installed windows vista OS from then onwards i am not getting ABAP keyword documentation in F1 help.
    please tell me how would i get this feature back.
    Regards
    Rajesh

    Check transaction ABAPDOCU. This shouldn't be dependent on which version of SAPGUI you have (assuming your sap rel is 4.6 or greater).
    Also look in table tstct for transaction abapdocu.
    If it doesn't exist then you need to re-install it. Should be part of standard SAP however.
    VISTA is irelevant in this regard - however you might need to access the SAP help files via a browser and a manual link as the automatic link doesn't work properly under VISTA unless SAPGUI 7.0 is installed -- as the previous poster has said.
    For the SAP library you can always use a manual link to the sap help data files but of course it won't work via F1.
    Cheers
    jimbo

  • 3.0 EA3, Key-Words should not be translated at all.

    Hi all,
    at first my compliment to the dev team. The raptor is about to fledgeup ....
    A little hint (not a real problem):
    From the Schema Browser chose a table (mark it via mouse) and Drag it into the SQL area. A dialog box appears with radio buttons to pick up the action of your choise.
    In german the translation is a bit silly. Don't translate these texts here - it makes no sense.
    OK is: Insert = INSERT and update = UPDATE.
    But "Löschen"= DELETE is strange, and "Wählen" = SLECT is simply silly at all.
    To make a long story short, Key-Words should not be translated at all.
    Thank you!
    Andre

    Unfortunately, the custom style sheet "feature" is still horribly broken, even in the latest 3.0.3. Setting a file in the preferences still doesn't set the correct URI in the preferences (either that, or Safari still doesn't know how to use a Windows file path to locate the style sheet).
    I'm also encountering problems where Safari will crash when using an ad blocking custom stylesheet.
    Also, when having the custom stylesheet set, trying to use the "Inspect Element" feature will crash Safari.

  • Word styles not appearing in Print Document Appearance dialog

    My custom list styles in Style Mapping.dot are not appearing in the Print Document Appearance dialog when I try to map CSS styles to Word styles.
    The styles do appear in the template when I open it in Word. They appear in the styles task pane whether I select "In current document" or "In use" in the Style Pane Options dialog in Word. The styles have the same name (such as "Bullet" or "Number") in Word as the CSS styles in RoboHelp.
    I tried saving Style Mapping.dot as .dotx, thinking that RoboHelp 8 might work better with the current template type, but no help. I tried adding the template to the same folder as the Normal.dotm template is in and opening it there. No improvement.
    Oddly, the built-in Word styles List, List 2, & etc and List Continue and its series appear in the Robo dialog, but the styles List Bullet and others in that series do not appear.
    I suppose I could modify the list styles that do appear in Robo and map them to my CSS list styles, but that feels a bit like a desperate kluge.
    Does anyone know what might be wrong, either with my Word template or with Robo, that might be causing what seem to be perfectly good Word styles to not present themselves for mapping?
    Thanks again,
    John

    Peter,
    I think your discussion of this problem could explain the situation and propose a workaround more simply than it does.
    Based on your article, I assumed that Robo displays only the built in Word list styles such as List and List Continue (since those were the only styles showing up in the style mapping dialog and since your example shows matching a Robo style named List Mapping to a Word built in style named List). I assumed I would have to match my Bullet style to a style named List in Word, and match the indented bullet style to List 2, and so on. The actual situation is that Robo, for some godforsaken reason that only idiots would understand, will not show a Word style if any numbering (bullets or numbers) is applied to it. That is, one does not have to avoid a class of styles called “List styles”, one only has to avoid applying numbering to the styles until later.
    Thus the workaround is to create the word styles (with names that match the Robo styles!) that contain every attribute you need EXCEPT the numbering. That is, I can link Bullet to Bullet and Number to Number and Indented Number to Indented Number, and so on and on, as long as I have all the Word styles in the template with their numbering set to None.
    Then after I generate the document, I can modify the styles to add the appropriate numbering, and voila!
    Currently scrolling the doc & modifying styles. Might be a glimpse of daylight.
    John
    From: Peter Grainge [email protected]
    Sent: Thursday, October 13, 2011 8:47 AM
    To: John Dawson
    Subject: Word styles not appearing in Print Document Appearance dialog
    Re: Word styles not appearing in Print Document Appearance dialog
    created by Peter Grainge<http://forums.adobe.com/people/Peter+Grainge> in RoboHelp - View the full discussion<http://forums.adobe.com/message/3969382#3969382

  • What are all the key words are not recommented in User Exit or Enhancement

    Dear Experts,
    Can any of one tell me, what are all the key words not recommended to use any of the User exit or Enhancement spots?
    Regards,
    Mohana
    Moderator message: please search for available information/documentation.
    Edited by: Thomas Zloch on Feb 22, 2011 4:10 PM

    No Icon:Visitor
    Student
    Honor Student
    Top Student
    Tutor
    Intern
    Teacher
    Grad Student
    Master’s Graduate
    PhD Student
    Associate Professor
    Professor
    Distinguished Professor
    Regents Professor
    Associate Dean
    Dean
    Provost
    FONDA X. COX, PhD

  • When buying tickets through Ticketmaster an.d other vendors, the "security words" do not appear under Firefox

    During the ticket purchase process, the purchaser is asked to enter two "security words" that are presented in a somewhat difficult to read (almost cartoon) format. My problem is that these two words don't appear even though the rest rest of the screen does. I must switch to Netscape or Internet Explorer which display the words.

    If images are missing then check that you aren't blocking images from some domains.
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    Make sure that you do not block third-party images permissions.default.images
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    *https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Hyperlinks in Word 2007 not appearing in PDF file

    I am not sure if this is more of a Word problem, or an Acrobat problem.
    However, I have a document in Word that contains a table of contents and several cross-references that are hyperlinks to locations in the document. In the Word file, you can CTRL + click and you will be taken to the destination of the hyperlink, for example to a topic in the Table of Contents.
    I used to make these a couple years back and they worked fine.
    I am using Word 2007 on a PC with Acrobat 8.1.2. I have tried both the Standard and the Rich Content PDF job options and neither of them seems to give me hyperlinks in the finished PDF file. Am I missing something?

    I've also had problems carrying links over from a Word file (I'm using Word 2002). External links in footnotes are not carried into the PDF file unless, using Change Conversion Settings - Settings, the 'Enable Accessibility etc.' box is ticked. Even then, in a 2mb file, with a lot of footnotes, whether the links are carried into the PDF file seems to depend on which computer I use. OK with XP and 1.5gb; but with Vista and 3gb the links do not appear in the PDF file. In either case its a 10+ minutes process.
    If you don't tick the box, links in footnotes are carried over only if the actual URL appears in the text. However, the process is much quicker.
    Ed McG

  • Word Search not appear Problem

    Hello Guy I need to help about Power Q & A word not appear
    Example
    Product name , Revenue in England it work
    But
    Product name , Revenue in America it not work and Wording "America" is white color (not appear)
    But when i filter (filter function in the Right Hand i Choose America information is appear
    Why this ..
    Help me please Thank a lot all guy

    Any suggestions for My?
    Thanks!
    Ed Price, Azure & Power BI Customer Program Manager (Blog,
    Small Basic,
    Wiki Ninjas,
    Wiki)
    Answer an interesting question?
    Create a wiki article about it!

  • Hello, Im trying to register and the " Are you human" words will not appear in the box so I may enter them. Can you help?

    I can not see the word or words at the bottom of the registration page. I've tried refreshing, requested a new word or words and I even selected try a different type of challenge instead. I can't continue with my registration because I'm being requested to enter the security word or words. They are Blank. Please help me with this matter.
    Sincerely,
    Sandy Tickle

    You can try these steps in case of issues with web pages:
    You can reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and remove cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > "Use custom settings for history" > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Key figures are not appearing in the reports ?

    Hi Guys,
    After integration process BW with Crystal 2008. I have tried to build a report on Bex query on top the Infocube. I could not fine key figures. Can you guys help me out ?

    Hi,
    can you run the BEx query in transaction RSRT without any issues and keyfigures are shown ?
    Ingo

  • ABAP key word puzzle (Help)

    Hi, everyone.
    I have read the following code:
    CALL METHOD  LR_COLUMNS->SET_COLUMN_POSITION
                                 EXPORTING :
                 !COLUMNNAME = 'VKORG'
                 !POSITION   = 01,
                 !COLUMNNAME = 'AUART'
                 !POSITION   = 02.
    So what does '!' mean? I have try to find something in Help, but it has nothing about '!'.
    Welcome any suggestions!
    Thanks very much.

    Hello James,
    the exclamation mark is nothing more than a hint to the ABAP compiler. It is required when you want use keywords like export, exceptions and so on as formal / actual argument.
    In the given scenario it is no must. But maybe the code is produced by some generator. For a generator not smart enough to no all rules, it is good advice to use exclamation marks for any parameter.
    Regards,
      Klaus

  • Accessing ABAP key word DB through program

    hello,
    Is it possible to acccess and search ABAP keyword database from within the program usikng any FM etc?
    Thanks in advance

    Sam m wrote:
    I want to scan programs through another program.
    Hi Sam,
    Are you looking to get the whole source code of a program?
    You can have all code of a program into an internal table using READ REPORT.
    ABAP Keyword Documentation
    Regards
    Sreekanth
    Message was edited by: Matthew Billingham

  • At end of and sum key word is not working properly

    Hi All,
    I have a requirement in that I have to calculate at the end of each fiscal year.
    I am using this section of code, But in my output its only showing me the value of the last record, its not summing up at the end of fiscal year.
    This is my section of code.
    SORT IT_BSEG BY GJAHR.
    LOOP AT IT_BSEG INTO WA_BSEG.
    AT END OF GJAHR.
    SUM.
            LOOP AT IT_ITAB INTO WA_ITAB WHERE GJAHR = WA_BSEG-GJAHR. " AND SPART = WA_VBRK-SPART.
              WA_ITAB-PRICE = WA_BSEG-DUE_AMT.
       MODIFY IT_ITAB FROM WA_ITAB TRANSPORTING PRICE SPART.
       clear wa_itab.
    ENDLOOP.
    ENDAT.
    ENDLOOP.
    Can any body let me know where is the mistake.

    Hi Madhukar,
                  As per my last thread the issue got resolved but now the challenge in front of me is to calcuclate the over due amount into if it lies in 0 to 30 days, 31 to 60 days, 61 to 90 days, 91 to 120 days and above 120 days.
    I used this logic but could not able to get the desired result. Please need u r help.
    Here I am posting the section of code which i am using to get the desired result.
    " 1 means 0 to 30 days
        " 2 means 31 to 60 days
        " 3 means 61 to 90 days
        " 4 means 91 to 120 days
        " 5 means above 121 days
        IF WA_BSEG-DAYS_NO GE 0 AND WA_BSEG-DAYS_NO LE 30.
          WA_BSEG-DUER1 = '1'.
        ELSEIF WA_BSEG-DAYS_NO GE 31 AND WA_BSEG-DAYS_NO LE 60.
          WA_BSEG-DUER1 = '2'.
        ELSEIF WA_BSEG-DAYS_NO GE 61 AND WA_BSEG-DAYS_NO LE 90.
          WA_BSEG-DUER1 = '3'.
        ELSEIF WA_BSEG-DAYS_NO GE 91 AND WA_BSEG-DAYS_NO LE 120.
          WA_BSEG-DUER1 = '4'.
        ELSE. " means it is greater than 120
          WA_BSEG-DUER1 = '5'.
        ENDIF.
    SORT IT_BSEG BY GJAHR DUER1.
    LOOP AT IT_BSEG INTO WA_BSEG.
    AT END OF GJAHR.
    SUM.
            LOOP AT IT_ITAB INTO WA_ITAB WHERE GJAHR = WA_BSEG-GJAHR.
              WA_ITAB-PRICE = WA_BSEG-DUE_AMT.
    IF WA_BSEG-AMTCAL = 'O'.
    AT LAST.
    ON CHANGE OF WA_BSEG-DUER1.
    SUM.
              WA_ITAB-PRICE = WA_BSEG-DUE_AMT.
    ENDON.
    ENDAT.
    ELSE.
    AT LAST.
        WA_BSEG-AMTCAL = 'D'.
    ON CHANGE OF WA_BSEG-DUER1.
    SUM.
              WA_ITAB-PRICE = WA_BSEG-DUE_AMT.
    ENDON.
    ENDAT.
    ENDIF.
       MODIFY IT_ITAB FROM WA_ITAB TRANSPORTING PRICE SPART.
       clear wa_itab.
    ENDLOOP.
    Thanks in Advance

  • Some functionalities in ABAP are not appearing after IE7

    Hi,
    Yesterday I did windows update and it upgraded my IE version from 6 to 7.  After this upgrade, I am unable to view certain areas in ABAP.
    For example if I go to SE80, the portion where we can select the drop down (Program, BSP application, ITS etc) and the place where we enter the program name  - is totally blank. 
    Also if I click F1 on ABAP key word, the key word documentation is appearing blank - only the left side tree for "ABAP - The SAP programming language" is appearing - nothing on right side - it is totally empty!!.
    Kindly suggest what should I have to do to get back all.
    Thanks,
    Krishnan V

    Hi,
    the patch download is not easy to find. Here's the link (on marketplace)
    <a href="https://smpdl.sap-ag.de/~swdc/012002523100007945712006D/gui640_22-10001615.exe">gui640_22-10001615.exe   SAP GUI for Windows 6.40 Patch</a>
    Regards,
    Clemens

Maybe you are looking for