ABAP list in Thai lang. is display properly after Unicode Conversion

Recently at a customer site we converted our SAP ERP ECC6 to unicode from non-unicode, Whenever there is some vowel in thai font at the beginning of the line , position of the line will shift right.
1. | ุทรปราการ | aa | >> abap list result
2. | ุทรปราการ | aa | >> print result
We have done as what SAP Note 947514 recommend but the issue is still not fixed.
Please share any information you are having in this matter.
Regards,

Hi,
Pl follow the below steps,
1. If you print via access methods U/S and use SAPlpd, replace SAPlpd with SAPSprint (note 894444).
2. If you print via access methods 'F', switch to access method 'G'.
3. Download device type THSWINU that is attached to this note.
4. Import the device type using report RSTXSCRP and assign it to package SPOO.
5. Assign the device type to your output devices that formerly used THSAPWIN.
Hope this helps,
Thanks,
Naga

Similar Messages

Chinese Version no displayed properly after Unicode Conversion

Hi,
Recently at a customer site we converted our SAP ERP ECC6 to unicode from non-unicode. After that we have applied chinese ( ZH ) language pack.
But the thing is there are still texts which are being displayed in English or German. such as when we go to MM03, the tabs MRP1, MRP2 and MRP3 are being displayed in english only when I login with ZH language. But when I login with DE, the tabs MRP1, MRP2 and MRP3 are being shown in German.
Also another thing is that all numeric data is being displayed with enmglish characters i,e, ( 1,2,3,...) where I expected them to be displayed in Chinese ( ZH ).
Please share any informationyou are having in this matter.
Regards,
Mandar.

Hi Mandir,
Unicode conversion is not meaning of when you login different language and the text and numbers will be displayed in the login language.
Unicode system having only one code page which can be showed the text and number in exact input format and would not show any junk characters.
In the SAP 4.7 version if you login in the Chinesh language and maintain a material description in same language and
Then if you again login in English language that description will be showed as junk characters(some other symbols).
Whereas in unicode system ECC6 if you maintain the material description in Chinesh and then login in English language you can able to see the material description in exact format.
If I get more information I provide that also.
regards,
Saravanan V

Some character display incorrect after unicode conversion

Dear Experts,
Currently we upgrade our SAP system from 4.6B NU to ECC6.0 UN.
in 4.6B system we had implemented Simple Chinese and French language package to the system. after upgrade to ECC6.0 no-unicode system. we perform a MDMP unicode conversion.currently system running with ECC6.0 unicode interface with language 1EFD. SUMG releated tasks had been finished. Chinese and French language checked OK in ECC6 UN system.
Our issue is. in the past time. some Spanish local end user typing some spanish character in some master date field when they login in 4.6B GUI choice english as login language.these kind of spanish characters could not display correct in current unicode environment.
could you please given us some suggestion for how to fix this issue.
I also sent this message in the Netweaver administrator forums with below links.
Spanish display incorrect after unicode conversion

Hello,
I doubt that the data shown by you in the link was caused by Spanish users logged on in EN.
I think this was rather caused by utf-8 data uploaded into the Non-Unicode system.
In this case, you need to repair the according texts manually, I do not know any automatic repair.
Best regards,
Nils Buerckel
SAP AG

Spanish display incorrect after unicode conversion

Dear Experts,
Currently we upgrade our SAP system from 4.6B NU to ECC6.0 UN.
in 4.6B system we had implemented Simple Chinese and French language package to the system. after upgrade to ECC6.0 no-unicode system. we perform a MDMP unicode conversion.currently system running with ECC6.0 unicode interface with language 1EFD. SUMG releated tasks had been finished. Chinese and French language checked OK in ECC6 UN system.
Our issue is. in the past time. some Spanish local end user typing some spanish character in some master date field when they login in 4.6B GUI choice english as login language.these kind of spanish characters could not display correct in current unicode environment.
could you please given us some suggestion for how to fix this issue.

Hello Anil,
Below items we checked between MDMP 46B and Unicode ECC6 with production client table SKAT. some Spanish display not correct.
Unicode ECC6.0     46B
Short Text     Short Text
Ant a prov - Gto imp     Ant a prov - Gto imp
Regal¨ªas     Regalías
Prov Herramentales     Prov Herramentales
Provisi¨®n de SLA     Provisión de SLA
Prov Fin Vida (EOL)     Prov Fin Vida (EOL)
Gtos de imp     Gtos de imp
Mat dañado o perdido     Mat dańado o perdido
Papeleria e insumos     Papeleria e insumos
Gastos Vtas-Diseño     Gastos Vtas-Diseńo
Ganancia p fluc camb     Ganancia p fluc camb
Aj anual p inf     Aj anual p inf
Depreciaci¨®n fiscal     Depreciación fiscal
Best Regards
Key

Unicode Characters not displaying properly after updating to 13.0.1+

Previously, I had installed the Symbola font because certain symbols were not displaying properly in Firefox (notably on Twitter). Installing the font solved the problem for the most part (the four bit hex characters still didn't show up, but the six bit ones did).
After updating to 13.0.1 the other day, the six bit hex codes do not show the correct symbol anymore with Symbola still installed. I even deleted Symbola from my fonts, redownloaded it (a newer version, no less), installed it, and opened Firefox, and it did not solve the issue. Like the 50 million other things that Firefox broke with the update to 13. -_-
EDIT: This issue has since persisted with 14.0.1.

Try to install the DejaVu font.
*http://en.wikipedia.org/wiki/DejaVu_fonts
*http://dejavu-fonts.org/

Fonts not displaying properly after 10.0 update (Mac OS X)

After I updated to Firefox 10.0, almost all websites now default to Times Roman, even after I have set Helvetica as my default font as well as have checked "allow pages to choose their own fonts".
I tried trashing prefs, reinstalling the previous version of FF but to no avail.
Never had this issue before and all fonts are displaying properly in Safari and Chrome.
Any ideas?

Ok repaired permissions and now ''some'' fonts display properly but some are still times roman. Even explicitly setting fonts in Firebug doesn't change them...

EURO sign not displayed correctly after unicode migration

All,
Don't know where exactly to post this, in BI forum or Netweaver Platform.
But here is my question:
We have migrated our SAP BW 3.5 (NW04, SP20) system from codepage 1100 (using general fallback codepage 1160) to unicode UTF-8. After the conversion graphic reports (using internet explorer) do not show the euro sign correctly in the unicode system. In stead of the euro sign a # is shown in the internet explorer window. When looking at the source of the same web page however the euro sign is showed correctly.
When looking at the encoding of the web page it is mentioned that utf-8 is used...
Any ideas...?
Thanks,
Regards, Bart

Hi Manoj,
It is with displaying of graphical data that the error occurs. Text data (tables) on the same web page are shown normally, with the correct euro sign.
When I look at the source of the web page it looks that for the graphic a java script is being called:
/sap/bw/Mime/BEx/JavaScript/JSBW_C_Std.js
Withing the coding I see the euro sign normally, however in the graphical display this is converted to #.
I have run the suggested query. The database nls_characterset is set to UTF8.
Thanks,
Regards,
Bart

Making ABAP sources Unicode compliant ... after Unicode conversion

Hi,
I was asked by a customer if there is any problem with the following scenario :
A system must be converted to unicode. Unfortunately, not all the ABAP source codes will be unicode enabled on-time for the conversion.
The development team wanted to know if they can assign priorities to ABAPs and focus their manpower on these ABAPs only.
The rest of the ABAPs will be made unicode compliant AFTER the conversion of the system.
I am well aware that if ABAPs don't have the Unicode flag checked, the system won't allow their execution but will it still be possible to edit the source code of those non unicode ABAPs and enable them afterwards ? From a technical point of view, I can't find any reason why it shouldn't be possible but who knows ...
Thanks for your answers,

Hi,
Yes during upgade the unicode check comes into picture..
The first unicode version is 4.7,so from 4.7 to higher versions unicode is thre...below 4.7 say 4.c is non unicode .
one example is u can dclare a variable of type X in non-unicode system(4.6c) but not possible in unicode system(ECC6.0).
Check the below links for understanding of unicode.
[UCCHECK downporting;
[UCCHECK;
[http://www.sap.com/korea/Company/Events/techday05/img/data_01.pdf]
[http://www.sap-press.de/download/dateien/1240/sappress_unicode_in_sap_systems.pdf]
[Re: ECC 6.0 Upgrade & changes required in programs;

The App Switcher of Mac OS X Lion doesn't display properly after waking up from sleep

Hey guys,
I have a MacBook Pro15 inch Core2Duo 2.66GHz running Mac OS X 10.7.2.
When my Mac woke up from sleep, sometime the Application Switcher doesn't show the iconc properly like this.
Other time, it shows the dark icon.
The color profile setting seems to be messed up. But it only affects certain apps.
Some of my affected apps are
Application Switcher
like attached image
Icons got darker
TweetDeckThe app becomes darker overall
Gaicho Software's XRGThe supposed-to-be orange indicater became red
Is there any solution to this?
Thanks in advanced!

Yes, change your display / colour profile to a different (or the default) profile. Has worked for myself, and many others on other forums.
Hope that helps...
D.

My Finder window doesn't display properly after drag & drop

When I do a drag/drop - maybe to add a mail attachment or insert a picture into Powerpoint - the Finder window changes/freezes in that it I can no longer scroll up or left - any ideas what might be going wrong?
Thanks in advance.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below on this page to select it:
kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}' | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. If the command produced no output, the window will be empty. Post the contents of the TextEdit window (not the Terminal window), if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
{ sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo; sudo defaults read com.apple.loginwindow LoginHook; echo; sudo crontab -l; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
{ launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)/{print $3}'; echo; crontab -l 2> /dev/null; } | open -ef
Step 4
ls -A /e*/{cr,la,mach}* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts .la* 2> /dev/null | open -ef
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 5
osascript -e 'tell application "System Events" to get name of every login item' | open -ef
Remember, steps 1-5 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.

3.1 Bug? - Images don't display properly after upgrade to 3.1 from 3.0

When pages are displayed after the upgrade, the image appears the first time the page is opened. Once a user goes to another page, then come back to the page with the image, the image is no longer displayed.
This happens when the browser is set to "Check for newer versions of stored pages". When it checks for the new version, the image is not displayed.
This looks like a Bug? Is someone working on a fix for this?
Thanks.
- Scott

Scott,
Thanks for this information. It is very helpful. May I put you through one last contortion, please?
I would like to see what information is being passed in the HTTP header in the request for one of these broken images. If you have Live HTTP Headers or Firebug for Firefox, or Fiddler for IE, this should hopefully be easy. You don't seem technically challenged in the least, but just for the record, here's what I did using Firefox:
1) Ran the Timesheets application
2) For the very first icon on the left "My Timesheets", I right-clicked my mouse and chose "Copy Image Location"
3) I opened up a new tab in Firefox and pasted the URL and then hit enter to retrieve the image
4) I turned on Live HTTP headers and then clicked Refresh in my browser.
I am most interested in the If-Modified-Since HTTP header. The full request on my system was:
GET /pls/apx11c/wwv_flow_file_mgr.get_file?p_security_group_id=191046216955701077&p_fname=eba_timesheets.png HTTP/1.1
Host: apexdev.us.oracle.com:7778
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.12) Gecko/20080201 Firefox/2.0.0.12
Accept: text/xml,application/xml,application/xhtml+xml,text/html;q=0.9,text/plain;q=0.8,image/png,*/*;q=0.5
Accept-Language: en-us,nl,it;q=0.9,en-gb;q=0.9,ja;q=0.8,de;q=0.8,zh-CN;q=0.7,zh-tw;q=0.7,en;q=0.6,af;q=0.6,fr;q=0.5,pt-br;q=0.5,ko;q=0.4,ca;q=0.4,de-ch;q=0.3,zh;q=0.3,bn;q=0.2,ja-JP;q=0.2,fr-ca;q=0.1,ru;q=0.1,ru-RU;q=0.0
Accept-Encoding: gzip,deflate
Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7
Keep-Alive: 300
Connection: keep-alive
If-Modified-Since: Wed, 20 Feb 2008 22:54:09 GMT
If-None-Match: "1951996202472197182454517155409"
Cache-Control: max-age=0Thanks in advance.
Joel
P.S. I nuked the Cookie line of the request, as it contained my e-mail address and I want to avoid the Web harvesters of e-mail addresses.

Disabled combo boxes don't display properly after loading a movie.

Hi,
I have a main movie that contains some combo boxes. Some of them may be disabled.
By pressing a button I load another movie using loadMovie. The loaded movie also contains combo boxes.
When the button is pressed, the clip that shows the combo boxes is removed from the stage and the loaded movie is displayed. By pressing another button, the loaded movie is unloaded and the clip with the combo boxes is displayed again.
Well, once the other movie has been loaded, when I go back to the clip with combo boxes, the disabled combo boxes have a small gray button covering the black down arrow.
I have determined that so long as the loaded movie contains combo box in the library, the problem occurrs, even if there is no actual instance of it.
The combo boxes that are not disabled are not affected. The combo boxes are disabled by setting "cb_name.enabled=false".
If the combo box is enabled, it displays correctly, but if disabled again, it goes wrong again.
My project is targeting Flash 8, so it uses AS2.
I'm using Flash CS4.
This is a very simple example I did to make sure I wasn't doing anything funny:
Initially:
After pressing the button:
After pressing the other button:
The behaviour in a web browser is the same...
I hope someone can help me with this. Thanks in advance!

Thanks for the response.
The "Load the movie" button:
on(click)
    _parent.gotoAndStop(2);
The 2nd frame:
loadMovie("Test another child.swf",Container);
stop();
The "Unload and go back" button:
on(click)
    unloadMovie(_parent.Container);
    _parent.gotoAndStop(1);
Container is a movieClip with a dark gray square shape the size of the movie clip that is loaded. It doesn't exist on frame 1, only on frame 2.
The combo boxes are inside a movie clip, and this is only on the stage on frame 1.
This and the captures belong to a very simple test I did. If there is a way of posting files, I can post a zip file with the two .fla and the two .swf.

Websites not displaying properly after reset - Strange horizontal bars across screen.

Hi all,
Recently AVG updated on my PC. I'm normally on the ball with things like this and always prevent the add ons self installing such as free search tools etc but this one slipped past me. The end result was that whenever I opened a new tab AVG had hijacked FF and I was presented with an AVG search page. Tried getting rid of it without success so reset FF.
Since doing this some (not all) sites have display problems. The most affected seem to be Ebay and FB. What happens is after the page loads and I scroll down most of the page dissapears behind horizontal black and grey bars. It certainly wasnt like this prior to the reset so something has obviously gone afoot in settings but I could do with some help as to which settings need to be re tweaked. If it helps I can grab a screen shot of the problem and host it.
In case its relevant I'm running Win 7 64bit ultimate.
Many thanks, Chris

You can try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
You need close and restart Firefox after toggling this setting.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Time Machine Disk Icon not Displaying Properly After Reconnect

I'm noticing a little oddity that has been happening since I upgraded to Mavericks. If I disconnect my Time Machine (TM) volume, then, reconnect it later and perform a backup, the disk icon on my desktop isn't changing to the green TM icon, it's still displaying as the orange Firewire icon. I can correct this by opening the TM preferences, clicking "select disk" and, then, reselecting my TM volume. The icon will, then, change and it will remain correct as long as the volume is connected. Normally, the icon should change automatically when the first backup is initiated.
Anyone else seen this and know why this might be happening? I'm wondering if there might be something screwy with my TM preferences. As a next step, I might try resetting TM (i.e. trashing the .plist file) and see if that fixes the behavior.
This isn't affecting TM functionality at all. TM is still working perfectly. This is, at best, an annoyance.

I suspect Apple took this funcionality out of Mavericks for some reason. I'm running several Macs at our business, and they all are doing the same thing.

ITunes doesn't display properly after update

Today I used the Mac App Store to update my iTunes to version 12. When I open it, the entire top toolbar (where the play button, song title, etc.) and the entire sidebar on the left side won't show up, I'm looking at half a window and it's half useful. Closing and opening the program does nothing, nor does restarting my Mac.

Hello again, GiannisFromAthens.
At this point, considering that the primary issue is with getting the Windows update resolved, we need to get that taken care of first. To do so you may need to consult Microsoft, or whoever supports the installation of Windows on your computer, for more troubleshooting to resolve it.
Once that is resolved, if you are still experiencing the issue, you may find better information by using another of Apple's Support resources at https://expresslane.apple.com/GetProductGroupList.action for a more hands on response.
Cheers,
Pedro D.

ABAP list in Thai lang. is display properly after Unicode Conversion

Similar Messages

Maybe you are looking for