ABAP List - Printing problem

Hi,
We have a Z format Z_65_1023 assigned to the LOCL printer. When the output is displayed using the SPOOL the format is fine. But when the output is sent to the printer, the SAPLPD window has the following message:
SAPLPD: job xxx sent to printer(raw): nnnn bytes finished.
And it prints a one line message of hexadecimal values.
Has anyone faced such a problem before? If yes, please reply.
Regards,
Aravinda Sarma M.

Hi,
see this link
http://help.sap.com/erp2005_ehp_03/helpdata/EN/9f/dba54635c111d1829f0000e829fbfe/frameset.htm

Similar Messages

Attachment list printing problem

I am using the Entourage mail program. How does one get the box that lists the file names of attachments to a message to print out as part of the message? I just want to have a printed copy of the list--not the contents of the attachments called out in the list.
For instance, I send out a message with a series of attachments listed in the box below the subject line, but when I print out the message I have sent, the attachments are available when the paper clip is clicked, but are not listed when a copy of the sent message is printed.
Thank you.

Hi Experts,
Could you please let me know,which format has to be selected, my report is exceeding 255 characters.
Z_65_1032         Format for 65-1032 columns
Z_FREE_SIZE      Free size
Formats suitable under certain conditions:
X_PAPER          ABAP/4 list: Default list formattin
X_SPOOLERR       ABAP list: Spooler problem report
X_65_255            ABAP/4 list: At least 65 rows with
X_58_170            ABAP/4 list: At least 58 rows by 17
X_65_132           ABAP list: At least 65 rows by 132
X_90_120           ABAP list: At least 90 rows by 120
X_44_120          ABAP/4 list: At least 44 rows by 12
X_65_80            ABAP/4 list: At least 65 rows by 80
Regards,
IFF

ABAP list printing on device I2SWIN

Hello,
we have defined output device (printer) with device type I2SWIN for printing on users frontend computers via SAPlpd. Settings of I2SWIN device type is default:
SAPlpd/SAPWIN driver 3.0
Do not use printer driver for ABAP list print
Character set 1406 Printer I2SWIN ISO 8859-2 (MS Windows Latin-2)
We can print ABAP lists on this device. We define formats and set margins and orientation in this formats. But these settings are ignored during printing. If we change in I2SWIN setting Printer driver to "Printer driver for SWIN printing using SAPLP/Windows", then margins are accepted and printed, but there are wrong characters in print output (not in requested code page).
Could anybody help us how to set print to accept margins in ABAP lists and also have print output with good code page.
Thank you
Vaclav Jonas
Edited by: Vaclav Jonas on Apr 24, 2008 3:02 PM

O.K., we use margin settings according SAP Note 21738 and all works fine.

Abap Lists - Printing - defining font and CPI and applying to printed text

Hi,
I am trying to define some forms for matrix printing. I should change the font type, and CPI.
We will print ABAP Lists.
I see my fonts (courier, 100, 12CPI, Prnt.Ctrl SF005) are defined in SE73.
In SPAD - device type (choose spec. one) u2013 Print Controls (tab) I can see SF005, marked u201EDirectu201C column, as well as u201EHexadecimalu201C. Control Character Sequence is 1B6B001B4D121B57001B461B35.
I can see 31 more SFxxx Print controls here.
How do I apply specific Print Controls (SF005) from this list to a printed document? (I assume this is the list of available prnt.ctrls that can be used for printing, but how do I "select" specific ones and apply them to document print?)
How do I choose u201ECOL0N: Color off, normal fontu201D (intensified OFF u2013 I heard that sap print in bold by default)?
Thanks in advance,
cheers,
Nenad
P.s. u2013 in printer settings the default font is Coourier 10, 12CPI, draft output. If I change this settings on printer directly, no effect is applied on printed documents... Printing from ECC 6.0
Edited by: Nenad Nikolic on Oct 26, 2010 4:49 PM - details...

hi again,
more info:
In Formats (Z_fakt1) - Formats (tab): u201EPrinter initializationu201C, I can see some predefined settings, but it is copied from some IBM printer, and I wonder is it correct. There is nothing about font type:
#reset
\e\0x40
select US-ASCII character set
\e\0x52\0x00
set line spacing 6 LPI
\e\0x32
set page length to 12 inch (=72 lines at 6 LPI)
\e\0x43\0x48
cancel bottom margin
\e\0x4F
set left margin to 0
\e\0x6C\0x00
select draft quality
\e\0x78\0x00
select non-proportional spacing
\e\0x70\0x00
cancel condensed printing
\0x12
disable double-width printing
\e\0x57\0x00
select 10 CPI
\e\0x50
Result here is: 11CPI. Bold. Looks like "Times New Roman"
The exact copy from IBM printer is used for another format (Z_fakt2), nothing is different except:
select 12 CPI
\e\0x4D
Result here is: 10CPI. Bold. I am under BIG impression that the font type is different. But it is possible the font looks different just due to a size difference. Looks like "Courier New"
In both cases I print predefined text with same output device, same device type.
When I set 15CPI (0x67) u2013 I still get 10CPI, just the font looks more plain, more "draft" then before - like once in DOS. I am certain that these font type is definitely different then before (for example, here "W" have parallel endings). These fonts are even more suitable for these reports...
Shouldn't the fonts be SMALLER and more of them in 1 inch (15 characters per inch) now then 10CPI (10 character per inch - less characters to fill 1 inch)??
If I set 1CPI - shouldn't there be just 1 big character on 24,5mm?
When I delete all entry (except # reset \e\0x40) from "Printer initialization" for one Format, the print output looks exact as before deleting (and saving)?!
I would like to set Courier font, (really 12CPI), plain text, no bold.
Where should I set this options?
Thanks and sorry for long input, but the more info you have, the more insight ou have in my problem...
Cheers,
N
Edited by: Nenad Nikolic on Oct 26, 2010 5:30 PM - update

Picking List Printing Problem

Hi,
I have copied SD_PICK_SINGLE Layout and using standard RVADDN01 Program.
While Printing These Errors is coming :
Element HEADER_DATA window MAIN is not defined for form YHPK-PICK_SINGLE
Element HEADER_TEXT window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_TEXT window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_PURCHASE_DATA window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_LINE_BATCH window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_LINE_CONFIGURATION_BATCH_HEADER window MAIN is not defined for form
Element ITEM_LINE_BATCH window MAIN is not defined for form YHPK-PICK_SINGLE    ....
I dont know why these errors are coming as i have copied the standard layout form.
I have made a new output type 'YHPK' in 'V2' Shipping...
In this output type i have selected two processing routines:
1     Print output RVADDN01     ENTRY     YHPK-PICK_SINGLE
2     Fax          RVADDN01     ENTRY     YHPK-PICK_SINGLE
While Debugging all the Elements are traveresed but the value is not populated.
As a result blank picking list only with heading is printed.
Please help me resolve this issue urgently....
Regards,
Abhishek
[email protected]

Yes i even activated it for both DE and En Versions...
But the same problem
Message was edited by: Abhishek Bachhawat

Packing list printing problem......

Hello Experts,
We are having a new problem in Master Packing List, after the modified package has been loaded to SPD. For same material code, appearing against different WBS elements, the print-out contains separate line items but with same WBS no. (which is appearing first in the sequence).
Regards,
Boseavi

thanks for ur reply.....
I will check & confirm...
Boseavi

ABAP list printing

Hi friends,
Developed a report where line size is upto 255. While taking print out the font size becomes very small.
Another way is to download list in notepad and then take printout. But this disturbs the column headings.
Is there any option to change the default A4 page size to A3. Or to split list in two portions vertically.
Pls help.
Thanks
anu

go to transaction SPAD.
AND IN OUTPUT DEVISE CHANGE PAGE FORMAT

Alv List print printer information in 1st page

Hi,
At the time of alv list printing the following information is printed on 1st page. How to avoid this information when printing.
INITSTRING
Start r_3-Prolog
Drucker : Wipro EX-330+DX
System : RAP (reprdfo)
User : 11BO
End r_3-Prolog
Thanks in advance.

Hi GoldMoon,
(edit) Print another basic ABAP list (print anything else) on the same printer to see if that first page is printed. If yes, it's probably either SAP, OS, or Print Server cover page. They are explained in "cover page" SDN wiki, there are explanations how the cover page can be output (and so you can deduce how to remove it).
Best regards,
Sandra
Edited by: Sandra Rossi, 5 minutes later

Printing A3 page format using ABAP List from SAP is a problem...

Hi Experts,
I am trying to print a standard output (ABAP List) A3 page size from SAP.
I used SWIN, SAPWIN, I9HP4 device types, but none of them worked.
I created page format type ZYEVMIYE 290MM 420MM and the page format L120, W200. In order to make it usable with page size is A3. Unfortunately this did not work either.
The behaviour of the problem is when I tried to print with the device types that mentioned above then printer indicator comes to an error. And nothing comes out from the printer.
Just to be on the safe side I made a test from windows self test, it resulted success with A3 page size format. So from this point of the view I got a thought that somehow SAP (selected device types) is not able to send correct signal to Printer for page size A3, because on the printer information screen displays load Tray2 for A4 this is showing that SAP sends Printer a signal for page format A4.
I need help on how to make SAP (selected device type) send a correct signal to Printer in order to printout A3 page size format.
Quick reply will much be appreciated.

Hi,
At last i got a Solution to my Question.
The Problem is that in my SAP-Code they have been translated the PDF into 255 string.But i am retreiving using 132 string.So, i resolved in this way.
<b>For Each dr As DataRow In ds.Tables(0).Rows
Dim dataline As String = dr(0)
If dataline.Length < 255 Then
dataline = dataline.PadRight(255, " ")
End If
sb.Append(dataline)
Next.</b>
May be this Thread is useful to Others.
Regards,
Rajender.

Print preview in abap list format (OMLV) - Need preview in graphical format

Dear All
I am facing a problem with the print preview. (transaction code OMLV)
When i am clicking on print preview button the system is displaying the output in a ABAP list format.
and also the printout shows only the ABAP content.
Pl. advise on how to view the print preview in a graphical format and not in the ABAP list format and pl. let me know the setting to print the spool in the graphical format.
Thanks,
Maxx

Hi,
this problem is not only related to warehouse. even the print preview spool for GR/GI slip in t-code SP01 shows as ABAP list and not as graphical screen.
my question is why does the system shows the print preview for spool as an ABAP list instead of graphical view.
pl. advise
Thanks,
Maxx

Print preview in abap list format

Dear All
I am facing a problem with the print preview.
When i am clicking on print preview button the system is displaying the output in a abap list format.
but when i m taking the print it is coming correctly.
The out put format is different in the print preview where as when i am taking the output it is coming correctly.
Pls help me out on this.

Please check this answered link:
Invoice print preview defaults to ABAP List View

ABAP List Output Printing Error

Hi All,
I am facing a problem while printing the ABAP List Output. First Page is printing fine and from the second page its not printing. Where as in Standard reports everything is printing OK.
Thanks in Advance.
Best regards,
Shahid Malayil

Hello Shahid,
For list printing: Add to affected reports with NEW-PAGE PRINT ON LAYOUT/ SUBMIT... TO SAP-SPOOL LAYOUT (print at list generation). For printing from list display, adjust REPORT width specification to force selection of the format and move format to SAP namespace (name "X....").
May be this can help you.
Cheers
Mudassir.

ABAP list report wont print on Z device type with Z format

Our developer have created a report which outputs data in ABAP list format and the standard format would not fit. We have since created a custom format and copied a device type in to custom device type. So we now have a custom format and custom device type. However when we print, it spools correctly and shows as green but the report wont print. The only thing that gets printed is
"Sort criteria AscdgDescndSubtotalGRAND TOTAL : X X PROJ" "
The abap list format is Z_100_500. Basically the report has 450 columns and hence we created this format.
I am not sure what this means. I have been advised by SAP to follow instruction on note 17895 - Adapting print list formats for customers however i cant fully comprehend point 5 of the note and I believe this is why it wont print. Has anyone adapted ABAP list using this note. Can you please let me know how i should go about printer initialisation mentioned in the noted.
We have checked everything however dont seem to get around the issue. Any ideas will be appreciated

No comments

Inactivate the print button is the ABAP list

How can I inactivate the print button in the report program (ABAP list)?
I can inactive the print button on selection screen by using 'RS_SET_SELSCREEN_STATUS'. But can't achieve the same effect after the program jumped to the list output screen.
Thanks!

hi,
To achieve this you need to create your own custom pf-status. The tcode for creating new pf-status is se41. Goto SE41, enter the program name and click create.
Enter the menu bar buttons, application tool bar button and Function key as per your requirement. Active the pf-status. Once the pf-status is created, use this in your program using the statement.
set pf-status 'ZPF'.
Regards,
Richa.

Trying to print ABAP List in Unix

I am new to SAP and I am trying to print using unix as my host spooler. I am printing to a Xerox machine connected to a print server. I am just trying to print the test ABAP list you get when you go into SPAD and select Utilities/ouput devices then select ABAP List. When I print this I get nothing but ABCD and a bunch of numbers. I am trying to figure if the ABAP list is supposed to be that way or if something is wrong with my driver.

Hello Rodney,
What device type did you specify in the SPAD Output Device definition? You need to make sure you select a device type which is compatible with the printer. If the printer supports postscript printer language, then you need to select the 'Post2' or 'postscpt' device types. If the printer support PCL, then test with 'hplj4' device type. Most likely the currently selected device type is not compatible with the printer and therefore creates a print file which the printer cannot interpret.
Regards,
Nathan

ABAP List - Printing problem

Similar Messages

Maybe you are looking for