ABAP Looping technique
Hi,
I want to calculate margin percentage based on line item wise & subtotal wise for a billing doc/sales doc.
I have already accomplish line item wise & working fine. Problem occurs when I want it to be print subtotal wise.
I have applied logic to calculate subtotals but loop is not working properly though not getting any errors but not getting desired output ,instead I am getting same output in as getting in percentage line item wise but ideally figure should be different in % if we are calculating it line item wise & subtotal wise.
Hi Drasthi,
Sample code,
REPORT ZPRODUCT.
TYPE-POOLs: slis.
data: lv_p TYPE p DECIMALS 2,
it_fcat TYPE slis_t_fieldcat_alv,
wa_fcat TYPE slis_fieldcat_alv.
data: BEGIN OF itab OCCURS 0,
lv_per TYPE string,
END OF itab.
START-OF-SELECTION.
lv_p = '12.0'.
if lv_p is not initial.
MOVE lv_p to itab-lv_per.
CONCATENATE itab-lv_per '%' INTO itab-lv_per.
APPEND itab.
endif.
wa_fcat-fieldname = 'LV_PER'.
APPEND wa_fcat to it_fcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = sy-repid
IT_FIELDCAT = it_fcat
TABLES
T_OUTTAB = itab[]
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
Regards,
Venkat.
Similar Messages
-
Hi guru's in ABAP loop with in the loop is possible
hi guru's in ABAP loop with in the loop is possible
Hi sri,
it is posible clearly.
see this code.
data: t_spfli type table of spfli with header line,
t_sflight type table of sflight with header line.
select * from spfli into table t_spfli.
select * from sflight into table t_sflight.
loop at t_spfli.
write:/ t_spfli-carrid,
t_spfli-connid.
loop at t_sfplight where carrid eq t_spfli-carrid
and connid eq t_spfli-connid.
write / t_sflight-fldate.
endloop.
endloop.
Plz Reward if useful,
Mahi.
Message was edited by:
Maheswari Chegu -
ABAP Loop Question for next record
Hello All, I am new to ABAP so please forgive this basic question. The below is a snippet of code I have in a ABAP Proxy.
Here is a snippet of my code:
DATA: ls_item TYPE ZSHOPPING_CART_IN_BBP_PDS_SC_I.
DATA: i_item TYPE TABLE OF bbp_pds_sc_item_icu.
DATA: w_item TYPE bbp_pds_sc_item_icu.
LOOP AT input-I_ITEM-item INTO ls_item.
CLEAR w_item.
w_item-guid = v_item_guid.
w_item-parent = v_header_guid.
w_item-description = ls_item-description.
w_item-number_int = ls_item-number_int.
w_item-category = ls_item-category.
w_item-category_id = ls_item-category_id.
w_item-product_type = ls_item-product_type.
APPEND w_item TO i_item.
ENDLOOP.
The structure input-I_ITEM-item is an input from a ABAP Proxy. This all works great if I feed in only 1 line item to proxy, but if I send in two line items the result is i_item has line item 1 twice, and I get nothing for line item2. It is almost like the the loop runs twice but the ls_item stays on line 1. I am sure I am missing something simple.Here is a snippet of the XML I am sending to ABAP proxy:
<I_ITEM>
<item>
<GUID>00000000000000000000000000055556</GUID>
<PARENT>00000000000000000000000000055555</PARENT>
<NUMBER_INT>0000000001</NUMBER_INT>
<DESCRIPTION>Proxy Test Line</DESCRIPTION>
<CATEGORY>268CA1C5BB9965449BED8C9B49484999</CATEGORY>
<CATEGORY_ID>03000</CATEGORY_ID>
<PRODUCT_TYPE>01</PRODUCT_TYPE>
</item>
<item>
<GUID>00000000000000000000000000055557</GUID>
<PARENT>00000000000000000000000000055555</PARENT>
<NUMBER_INT>0000000002</NUMBER_INT>
<DESCRIPTION>Proxy Test Line 2</DESCRIPTION>
<CATEGORY>268CA1C5BB9965449BED8C9B49484999</CATEGORY>
<CATEGORY_ID>03000</CATEGORY_ID>
<PRODUCT_TYPE>01</PRODUCT_TYPE>
</item>
</I_ITEM> -
HR ABAP: LOOP AT SCREEN: Multiple Fields Disabling.
Experts,
Am a new member in the world of SAP ABAP!
Need ur advice regarding.
Have coded following for disabling a field in PBO based on subtypes.
IF p9235-subty = GC_AICTD.
IF screen-name = 'P9235-ZZ_RC_MDE'.
screen-active = 0.
MODIFY SCREEN.
ENDIF.
ENDIF.
This disables the particular field mentioned in the screen name.
If i want more than on field names to be disabled under single validation, then what should i do?
Your help to this fresher would be appreciated!
Points will be definitely rewarded for your help and time...
Thank you.
Sundar.*& Module display OUTPUT
text
MODULE display OUTPUT.
*break-point.
loop at screen.
if create = 'X'.
if screen-group1 = 'XXX'.
screen-input = 1.
modify screen.
endif.
endif.
if display = 'X'.
if screen-group2 = 'YYY'.
screen-input = 0.
modify screen.
endif.
endif.
endloop.
ENDMODULE. " display OUTPUT
but declare the group! -
Hello Colleagues,
I want to read multiple values from a table and display for which i going thru an loop .
But to display it is becoming an problem can you kindly see the code below .
Am trying to store the table fields in an table as mentioend below in the ABAP ENDABAP code.
V_C3[]-TABLE_LINE = <fs_field>.
But i am getting an error while compiling the code.
Can you suggest the solution for the same ?
loop at <fs_itab> assigning <fs_wa>.
assign component 'CLIENT' of structure <fs_wa> to <fs_field>.
V_CLIENT = <fs_field>.
assign component 'C0' of structure <fs_wa> to <fs_field>.
V_C0 = <fs_field>.
assign component 'C1' of structure <fs_wa> to <fs_field>.
V_C1 = <fs_field>.
assign component 'C2' of structure <fs_wa> to <fs_field>.
V_C2 = <fs_field>.
assign component 'C3' of structure <fs_wa> to <fs_field>.
V_C3[]-TABLE_LINE = <fs_field>.
assign component 'C4' of structure <fs_wa> to <fs_field>.
V_C4 = <fs_field>.
assign component 'C5' of structure <fs_wa> to <fs_field>.
V_C5 = <fs_field>.
assign component 'C6' of structure <fs_wa> to <fs_field>.
V_C6 = <fs_field>.
assign component 'C7' of structure <fs_wa> to <fs_field>.
V_C7 = <fs_field>.
assign component 'C8' of structure <fs_wa> to <fs_field>.
V_C8 = <fs_field>.
assign component 'MESSAGE_ID' of structure <fs_wa> to <fs_field>.
V_MESSAGE_ID = <fs_field>.
assign component 'TIMESTAMP' of structure <fs_wa> to <fs_field>.
V_TIMESTAMP = <fs_field>.
assign component 'EXTRACTKEY' of structure <fs_wa> to <fs_field>.
V_EXTRACTKEY = <fs_field>.
assign component 'STATEID' of structure <fs_wa> to <fs_field>.
V_STATEID = <fs_field>.
assign component 'DEVICE_ID' of structure <fs_wa> to <fs_field>.
V_DEVICE_ID = <fs_field>.
ENDLOOP.
regards
harshaHello Harsha,
This task can be performed in more simpler way if i understand your requirements correctly.
Inside ABAP ... ENDABAP statements use Select statement and read all the values from your target table and assign it to a Local variable of the same table type.
Note : Import & Export variables cannot be used inside the ABAP ... ENDABAP statement.
Once all the values are stored in the Local table , outside the ENDABAP statement you can assign directly to the Export variable of table type with the local variable.
This export variable becomes visible outside the script asusual.
This should solve your requirment.
Thanks & Best regards,
Ajay -
<b>Brief explanation of problem:</b>
I have a report that processes a lot of data. The amount of data is dependent on what the user selects on the selection screen, but even for one entry in selection criteria, there could be thousands of records and millions of loops.
The problem, in the report, seems to be that when a user selects a range of entries (A* or A00 DZZ), the program (scheduled in background) runs for a very long time. Typically it the execution time is less than 30-40 seconds for one entry, but even for 30 entries, the report only averages about 1,000 seconds.
When the report is selecting a large amount of data, it seems the report just keeps on running, sometimes well over 100,000 seconds. Im not using any DO or WHILE loops, which can run infinitely, these are simply multiple nested (large) loops, up to 8 nested loops. I have also monitored the memory usage of the background work process; it seems the memory levels-out after a certain point (about 500MB for large amount of data) and doesnt increase or decrease. I just cancel the report when it gets to that point and re-run it for smaller set of entries, and that works just fine.
<b>Now the questions:</b>
1) Can anyone diagnose the problem? Or am I just canceling the report too early?
2) Is there a limit, when reached, the ABAP program goes in some sort of infinite loop?Hi
There is not so much to add. It is obvious that some tuning measures should be taken. Some of the following will repeat the above recommendations. However let me write:
<b>1.</b> "BINARY SEARCH" addition may make great positive effect, however do not forget to sort your tables (The standard table must be sorted in ascending order by the specified search key).
<b>2.</b> Try giving your loop conditions with 'WHERE' statement instead of using 'CHECK'.
e.g.
LOOP AT gt_itab WHERE field_1 = 'A' .
ENDLOOP .
<u>is better than</u>
LOOP AT gt_itab .
CHECK gt_itab-field_1 = 'A' .
ENDLOOP .
<b>3.</b> If it is possible to specify keys, prefer using "READ TABLE...WITH KEY..." instead of "LOOP...ENDLOOP" to read single records.
<b>4.</b> Try using "WHILE...ENDWHILE" or "DO...ENDDO" if possible for looping. "WHILE...ENDWHILE" is better if you can prefer it.
<b>5.</b> Optimize your SELECT statements if any exists inside your loops.
__a. Prefer "SELECT SINGLE..." for reading single records and "SELECT...INTO TABLE..."(array fetch) to read multiple records.
__b. Try explicitly defining the fields you want to select. e.g. "SELECT field_1 field_2" is better than "SELECT * ".
__c. Eliminate redundant selection conditions.
__d. Generate secondary indices for the relevant tables if required.
__e. Hesitate from sophisticated selection conditions.
<b>6.</b> You can code some "WRITE" statements to trace the program execution. You can see the list output at debugging session by pressing the relevant button.
<b>7.</b> Use the "Runtime Analysis Tool" (SE30) to analyze your session for a reasonable set of data to see the relational execution time comparison between logical execution blocks of your program.
<b>8.</b> Try parallel processing. You can also consider exporting/importing generated lists.
Hope you can solve your problem...
*--Serdar
[email protected] -
Hello All-
I'm writing a loop and a read statement between two tables. What I am trying to do is flag certain records that exsist in one table but NOT in the other. For example, I have table /BIC/PG_ICODE which is the P table for Global ICODE and I also have a "z" table which hold all "valid" icodes. My logic is as follows: If an icode exsists in the P table AND also exsists in the "Z" table then I don't want to do anything with this record. But if it exsists in the P table but NOT in the "z" table then I want to insert this ICODE into an E_T_RANGE table. What I have done here is created a FM which will be called in a QUERY that I have built. The problem is that after the code is executed and I look at the records in the E_T_RANGE table, I find some icodes that exsist both in the P table and "z" table. The E_T_RANGE table should only contain icodes that exsist in the P table and NOT the "z" table. Can someone please have a look at my code and tell me what I am doing wrong?
DATA : L_S_RANGE LIKE E_T_RANGE,
IT_ICODE TYPE standard table of /BIC/TG_ICODE,
IT_PTABLE TYPE standard table of /BIC/PG_ICODE,
it_ZVALID_ICODES TYPE standard table of ZVALID_ICODES,
wa_ZVALID_ICODES TYPE ZVALID_ICODES,
l_sign type c value 'I',
wa type /BIC/TG_ICODE,
wa2 type /BIC/PG_ICODE.
SELECT /BIC/G_ICODE FROM /BIC/PG_ICODE INTO
CORRESPONDING FIELDS OF table IT_PTABLE where /BIC/G_ICODE like
'I%'.
sort IT_PTABLE by /BIC/G_ICODE.
SELECT /BIC/G_ICODE FROM ZVALID_ICODES INTO
CORRESPONDING FIELDS OF table IT_ZVALID_ICODES.
sort IT_ZVALID_ICODES by /BIC/G_ICODE.
loop at IT_PTABLE into wa2.
read table IT_ZVALID_ICODES with key
/BIC/G_ICODE = wa2-/BIC/G_ICODE into wa_ZVALID_ICODES.
if sy-subrc ne 0.
L_S_RANGE-LOW = wa_ZVALID_ICODES-/BIC/G_ICODE.
L_S_RANGE-SIGN = l_sign.
L_S_RANGE-OPT = 'EQ'.
DELETE ADJACENT DUPLICATES FROM E_T_RANGE.
APPEND L_S_RANGE TO E_T_RANGE.
endif.
endloop.
ENDFUNCTION.Hi try the following code...
DATA : L_S_RANGE LIKE E_T_RANGE,
IT_ICODE TYPE standard table of /BIC/TG_ICODE,
IT_PTABLE TYPE standard table of /BIC/PG_ICODE,
it_ZVALID_ICODES TYPE standard table of ZVALID_ICODES,
wa_ZVALID_ICODES TYPE ZVALID_ICODES,
l_sign type c value 'I',
wa type /BIC/TG_ICODE,
wa2 type /BIC/PG_ICODE.
SELECT /BIC/G_ICODE FROM /BIC/PG_ICODE INTO
CORRESPONDING FIELDS OF table IT_PTABLE where /BIC/G_ICODE like
'I%'.
sort IT_PTABLE by /BIC/G_ICODE.
DELETE ADJACENT DUPLICATES FROM IT_PTABLE.
SELECT /BIC/G_ICODE FROM ZVALID_ICODES INTO
CORRESPONDING FIELDS OF table IT_ZVALID_ICODES.
sort IT_ZVALID_ICODES by /BIC/G_ICODE.
DELETE ADJACENT DUPLICATES FROM IT_ZVALID_ICODES.
loop at IT_PTABLE into wa2.
read table IT_ZVALID_ICODES with key
/BIC/G_ICODE = wa2-/BIC/G_ICODE into wa_ZVALID_ICODES
binary search.
if sy-subrc ne 0.
L_S_RANGE-LOW = wa_ZVALID_ICODES-/BIC/G_ICODE.
L_S_RANGE-SIGN = l_sign.
L_S_RANGE-OPT = 'EQ'.
APPEND L_S_RANGE TO E_T_RANGE.
endif.
endloop.
sort e_t_range.
DELETE ADJACENT DUPLICATES FROM E_T_RANGE.
ENDFUNCTION.
Regards,
Suresh Datti -
ABAP Looping in internal tables
Hi,
I am working on alv report which fetches matnr with no transaction data by passing in ekpo,mseg,ekko tables and query is working is fine and append matnr in it_final to display.
But now I want to display matnr & matkx-makt but to get this field I have to compare with it_final-matnr to get the corresponding material description. correct values are fetched but issue is with display.
Code attached in file below.
Any help to sort out this would be appreciated.
Message was edited by: Drashti AmrutiaYou could simplify you report
- Join MARA and MAKT
- Check non existence of records in subquery
Sample :
TYPES: BEGIN OF record,
matnr TYPE mara-matnr,
maktx TYPE makt-maktx,
END OF record.
DATA: itab TYPE TABLE OF record,
lo_table TYPE REF TO cl_salv_table.
PARAMETERS: p_mtart TYPE mara-mtart.
START-OF-SELECTION.
SELECT * INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara
JOIN makt
ON mara~matnr EQ makt~matnr
WHERE mara~mtart EQ p_mtart
AND makt~spras EQ sy-langu
AND NOT EXISTS ( SELECT * FROM ekpo WHERE matnr EQ mara~matnr )
AND NOT EXISTS ( SELECT * FROM ekbe WHERE matnr EQ mara~matnr )
AND NOT EXISTS ( SELECT * FROM mseg WHERE matnr EQ mara~matnr ).
END-OF-SELECTION.
cl_salv_table=>factory(
IMPORTING
r_salv_table = lo_table
CHANGING
t_table = itab ).
lo_table->display( ).
Now execute some performance comparison with your FOR ALL ENTRIES options, and decide yourself.
(How did you choice the tables to check EKPO & EKBE but no EBAN, no RESB ?)
Regards,
Raymond -
How efficiently we use ABAP code to insert several records in database tab
Hi All,
Here I have a requirement to add several records ( approx 50 thousand) into database tables. We used hr_infotype_operation as standard function module to insert employee info in several infotypes.
I'm looking for a best way that we can call database. I mean database calls should be significantly lower while inserting records.
Can we execute sequence of statements at a time for all employees? Do we have ABAP standard techniques in place?
As per currently process it takes approx more than 1 hr to exact and update infotype tables for all employees ... it's really helpful to reduce the time even in fraction of minutes.
Thank you.Ofcourse the time will be less if you will use update statements.you will be bypassing a lot of sap's standard code.
But, I and anybody will strongly suggest to use the FM hr_infotype_operation, because it will make sure the integrity of data as if it is entered through PA30, will run all user exit and stuff.
There is a performance factor, but you can make it run faster by initializing the buffer after each call to FM hr_infotype_operation, by calling FM HR_PSBUFFER_INIT -
ABAP program "SAPLCNTL" in "CHECK_OO": MESSAGE_TYPE_X
Hi,
I have a problem with a program with ALV-list. Sometimes it terminates with a dump. I can not reproduce the dumps and I can not find the reason for it. I do not know, if it only terminates on some clients.
In the program the alv table is refreshed with CL_GUI_ALV_GRID=>REFRESH_TABLE_DISPLAY. After this there is also a statement CALL METHOD cl_gui_cfw=>flush.
Can anyone help?
Kindly regards
Frank
Runtime Error MESSAGE_TYPE_X
Date and Time 11.11.2008 11:24:28
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
Control Framework: Invalid Processing of ABAP Object Control
Technical information about the message:
Diagnosis
You want to edit a control created with ABAP objects techniques
(class-based Control Framework) using a function module (function
module-based Control Framework). The system does not support this.
The Class ID of the control is SAP.DataProvider.1.
System response
The transaction is terminated.
Procedure
Contact the person responsible for the SAP System.
Message classe...... "DC"
Number.............. 007
Variable 1.......... "SAP.DataProvider.1"
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLCNTL" or "LCNTLF01"
"CHECK_OO"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "gl3ap4"
Network address.......... "194.69.46.206"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C2809E4C00"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 8
Short dump setting....... "full"
Database server.......... "glince215"
Database type............ "ORACLE"
Database name............ "GL3"
Database owner........... "SAPSR3"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Feb 18 2008 23:36:16"
Created in............... "AIX 1 5 00538A4A4C00"
Database version......... "OCI_920 "
Patch level.............. "221"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.*.*, ORACLE 10.1.0.*.*, ORACLE
10.2.0.*.*"
SAP database version..... "640"
Operating system......... "AIX 1 5, AIX 2 5, AIX 3 5, AIX 1 6"
Memory usage.............
Roll..................... 16192
EM....................... 16759424
Heap..................... 0
Page..................... 139264
MM Used.................. 4672968
MM Free.................. 3703952
SAP Release.............. "640"
User and Transaction
Client.............. 001
User................ "PB754"
Language key........ "D"
Transaction......... "ZVLA "
Program............. "SAPLCNTL"
Screen.............. "ZTCOCKPT 2000"
Screen line......... 4
Information on where terminated
The termination occurred in the ABAP program "SAPLCNTL" in "CHECK_OO".
The main program was "ZTCOCKPT ".
The termination occurred in line 178 of the source code of the (Include)
program "LCNTLF01"
of the source code of program "LCNTLF01" (when calling the editor 1780).
Source Code Extract
Line SourceCde
148 *---------------------------------------------------------------------*
149 * FORM %_CONTROL_DISPATCH *
150 *---------------------------------------------------------------------*
151 *
152 *---------------------------------------------------------------------*
153 * --> OKCODE *
154 *---------------------------------------------------------------------*
155 FORM %_CONTROL_DISPATCH.
156 * CALL FUNCTION 'CONTROL_DISPATCH'
157 * EXPORTING
158 * FCODE = SY-UCOMM
159 * EXCEPTIONS
160 * CB_NOT_FOUND = 1
161 * OTHERS = 2.
162 ENDFORM.
163
164 FORM REGISTERGLOBALOCXEVENT
165 USING SHELLID TYPE I EVENT TYPE I.
166 CALL METHOD OF CL_GUI_OBJECT=>H_GUI 'RegisterGlobalOCXevent'
167 NO FLUSH
168 EXPORTING #1 = SHELLID
169 #2 = EVENT.
170 ENDFORM.
171
172 form check_OO using p_handle type cntl_handle.
173 * check sy-uname = 'KSCHMIDT'.
174 call method cl_gui_cfw=>get_subscriber_by_id
175 exporting shellid = p_handle-shellid
176 exceptions others = 1.
177 if sy-subrc = 0.
>>>>> message X007 with p_handle-clsid.
179 endif.
180
181 endform.
182
183 form check_oo_2 using p_shellid type i.
184 data l_handle type cntl_handle.
185 * check sy-uname = 'KSCHMIDT'.
186 call method cl_gui_cfw=>get_subscriber_by_id
187 exporting shellid = p_shellid
188 exceptions others = 1.
189 if sy-subrc = 0.
190 call function 'CNTH_HANDLE_BY_SHELLID'
191 exporting shellid = p_shellid
192 importing h_control = l_handle
193 exceptions others = 1.
194 message X007 with l_handle-clsid.
195 endif.
196 endform.
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 12
SY-DBCNT 1
SY-FDPOS 1
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY STAT2000
SY-UCOMM NSEL
SY-TITLE ZTCOCKPT Cockpit: Transporte Aufträge Lieferungen
SY-MSGTY X
SY-MSGID DC
SY-MSGNO 007
SY-MSGV1 SAP.DataProvider.1
SY-MSGV2
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
11 FORM SAPLCNTL LCNTLF01 178
CHECK_OO
10 FUNCTION SAPLCNTL LCNTLU13 16
CONTROL_DESTROY
9 FUNCTION SAPLCNDP LCNDPU07 22
DP_DESTROY
8 FUNCTION SAPLCNDP LCNDPU10 103
DP_CONTROL_ASSIGN_TABLE
7 METHOD CL_GUI_ALV_GRID_BASE==========CP CL_GUI_ALV_GRID_BASE==========CM01U 37
CL_GUI_ALV_GRID_BASE=>SET_TOOLBAR_BUTTONS
6 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM01M 52
CL_GUI_ALV_GRID=>SET_TOOLBAR
5 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM01P 432
CL_GUI_ALV_GRID=>SOFT_REFRESH_TABLE_DISPLAY
4 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM00T 116
CL_GUI_ALV_GRID=>REFRESH_TABLE_DISPLAY
3 MODULE (PBO) ZTCOCKPT ZTCOCKPT 652
PBO_ALV_2000
2 FORM ZTCOCKPT ZTCOCKPT 167
ALVAUSGABE
1 EVENT ZTCOCKPT ZTCOCKPT_INC 213
START-OF-SELECTION
Chosen variables
Name
Val.
No. 11 Ty. FORM
Name CHECK_OO
SY-REPID
SAPLCNTL
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454445422222222222222222222222222222222
310C3E4C00000000000000000000000000000000
%_VIASELSCR
0
4
P_HANDLE-SHELLID
128
0008
0000
BS_CENTER
768
0000
0030
%_DUMMY$$
0000
0000
2222
0000
FONT_ITALIC
1
0000
0001
SY-SUBRC
0
0000
0000
SY-XFORM
XAB_READ
000000000000000000000000000000
000000000000000000000000000000
544554442222222222222222222222
812F25140000000000000000000000
SY-MSGID
DC
00000000000000000000
00000000000000000000
44222222222222222222
43000000000000000000
SS_SIMPLE
11
0000
000B
SS_BLACKRECT
4
0000
0004
SPACE
0
0
2
0
SY-MSGNO
007
000
000
333
007
SY-MSGV1
SAP.DataProvider.1
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
54524676576766672322222222222222222222222222222222
310E414102F69452E100000000000000000000000000000000
P_HANDLE-CLSID
SAP.DataProvider.1
0000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000
5452467657676667232222222222222222222222222222222222222222222222222222
310E414102F69452E10000000000000000000000000000000000000000000000000000
SY-MSGV2
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV3
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SY-MSGV4
00000000000000000000000000000000000000000000000000
00000000000000000000000000000000000000000000000000
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
No. 10 Ty. FUNCTION
Name CONTROL_DESTROY
NO_FLUSH
X
0
0
5
8
H_CONTROL
OBJHOLE2## 7263 ####
00000000FF000000000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000FF000000000000000000000000000000000000000000000000000000000000000000000000000000000000
44444443FF222222222222222222222222222222222223333222222222222222222222222222222222222222080022
F2A8FC52FF000000000000000000000000000000000007263000000000000000000000000000000000000000000A00
BS_DEFPUSHBUTTON
1
0000
0001
BS_LEFT
256
0000
0010
THIS_DUMMY_VALUE
0
0000
0000
BS_PUSHBUTTON
0
0000
0000
H_CONTROL-OBJ+16(4)
-1
FFFF
FFFF
SYST-REPID
SAPLCNTL
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454445422222222222222222222222222222222
310C3E4C00000000000000000000000000000000
H_CONTROL-HANDLE_TYPE
NO_OC
0000000000
0000000000
4454422222
EFFF300000
CNTL_TYPE_OCX
OCX
0000000000
0000000000
4452222222
F380000000
CNTL_TRUE
1
0000
0001
IS_ITSAC_767A497173BF11D28BB
0
0
2
0
AC_EXPORTS_4E238C5273BF11D28BB
Table[initial]
AC_EXPO_WA_4E238C5273BF11D28BB
000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
2222222222222222222222222222222233333333322222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 9 Ty. FUNCTION
Name DP_DESTROY
H_DP
OBJHOLE2## 7263 ####
00000000FF000000000000000000000000000000000000000000000000000000000000000000000000000000000000
00000000FF000000000000000000000000000000000000000000000000000000000000000000000000000000000000
44444443FF222222222222222222222222222222222223333222222222222222222222222222222222222222080022
F2A8FC52FF000000000000000000000000000000000007263000000000000000000000000000000000000000000A00
G_STRETCH_UNICODE_COLS_VALID
X
0
0
5
8
%_DUMMY$$
0000
0000
2222
0000
SY-SUBRC
0
0000
0000
SYST-REPID
SAPLCNDP
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
5454444522222222222222222222222222222222
310C3E4000000000000000000000000000000000Hi Frank,
I doubt it is related to function 'LVC_FIELDCATALOG_MERGE' since the current SAP help documentation talks about using this function for the purpose that I'm sure you are using it. The short dump states that the problem is caused by the use of an "old" function-module-based control framework function combined with the class-based OO CFW.
Diagnosis
You want to edit a control created with ABAP objects techniques
(class-based Control Framework) using a function module (function
module-based Control Framework). The system does not support this.
If you look at the call sequence in the short dump, function module 'CONTROL_DESTROY' is being called (which then calls function 'CHECK_OO' from which the error is sent). Function module 'CONTROL_DESTROY' is in function group CNTL which is part of the "old" function-module-based CFW.
Since the 'CONTROL_DESTROY' function is ultimately called as a result of your Z-program legitimately calling the standard SAP method CL_GUI_ALV_GRID=>REFRESH_TABLE_DISPLAY, I'd say you might want to consider opening a customer message with SAP providing as much detail and background as possible. But before you bother to do that (or while you are waiting to hear back from SAP) you may want to double-check your Z-program to make sure you aren't calling some other function modules from function groups CNTL or CNT0 (the "old" CFW function modules).
I've included just the call sequence from your short dump here for easier reference. Notice the order of the calls from 1 to 11, ending with functions 'CONTROL_DESTROY' and 'CHECK_OO'. I think 'CONTROL_DESTROY' may be causing the problem (??):
Active Calls/Events
No. Ty. Program Include Line
Name
11 FORM SAPLCNTL LCNTLF01 178
CHECK_OO
10 FUNCTION SAPLCNTL LCNTLU13 16
CONTROL_DESTROY
9 FUNCTION SAPLCNDP LCNDPU07 22
DP_DESTROY
8 FUNCTION SAPLCNDP LCNDPU10 103
DP_CONTROL_ASSIGN_TABLE
7 METHOD CL_GUI_ALV_GRID_BASE==========CP CL_GUI_ALV_GRID_BASE==========CM01U 37
CL_GUI_ALV_GRID_BASE=>SET_TOOLBAR_BUTTONS
6 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM01M 52
CL_GUI_ALV_GRID=>SET_TOOLBAR
5 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM01P 432
CL_GUI_ALV_GRID=>SOFT_REFRESH_TABLE_DISPLAY
4 METHOD CL_GUI_ALV_GRID===============CP CL_GUI_ALV_GRID===============CM00T 116
CL_GUI_ALV_GRID=>REFRESH_TABLE_DISPLAY
3 MODULE (PBO) ZTCOCKPT ZTCOCKPT 652
PBO_ALV_2000
2 FORM ZTCOCKPT ZTCOCKPT 167
ALVAUSGABE
1 EVENT ZTCOCKPT ZTCOCKPT_INC 213
START-OF-SELECTION
Regards,
Jamie
P.S. Please report back here if you find a solution (or if SAP finds one as a result of your customer message). -
Hi Forum members,
How are u doing ?
I am Varun and I just started my career in SAP . I want to learn ABAP. Please guide me step by step procedure how to gain 100% knowledge in ABAP.
I want to spend 2 complete months in learning ABAP. Please guide me.
Kind regards,
Varun PrasadHi,
To learn ABAP its very important you should go through basics of ABAP. A good concept in DATA DICTIONARY AND SCREEN PROGRAMMING will boost your normal ABAP programming. than you should go to ABAP OOPs technique and try to learn this deeply. Now a days ABAP OOPs is used. you should also go through BADI,enhancement techniques ,modification,scripts,ALV . and there is no end for learning in ABAP.
So Best of Luck.
Regards
Piyush Singh -
Hi,
Following are my table structure.
Table Name : CODE
ID, Code, Level, Details [ Note : ID is Auto generated by sequence]
I have a job that runs everyday to hit the remote view to pull the data into CODE table. View structure and Sample data in the remote view as follows
Structure : Level0_Code, Level1_Code, Level2_Code , Program
Sample Data : 'AA1234', 'XX1234','Zinc1543', MU
I want to insert the the above row into CODE table as follows.
1, AA1234, Level0,MU
2, XX1234, Level1, MU
3, Zinc1543, Level2, MU
The remote view will have 50000 rows. Is it possible to do this using Merge clause b/w Remote view and my table? If yes could you please show me some sample.
I definitely know this can be done with the help of Looping technique.A beautiful use of UNPIVOT Etbin, and a very nice solution. I need to remember and use PIVOT/UNPIVOT.
Unfortunately the original poster says the version is Oracle 10g, and UNPIVOT was introduced in Oracle 11.1
The (more clumsy) Oracle 10.2 version is
select seq_id.nextval, q.* from
(select CASE p.lvl when 1 then level0_code when 2 then level1_code when 3 then level2_code end as code
, CASE p.lvl when 1 then 'Level0' when 2 then 'Level1' when 3 then 'Level2' end as lev
, program
from (select 'AA1234' level0_code,
'XX1234' level1_code,
'Zinc1543' level2_code,
'MU' program
from dual
) src
cross join (select level lvl from dual connect by level <= 3) p
order by level0_code, level1_code, level2_code, program
) qThe (select level lvl from dual connect by level <= 3) generates numbers 1,2,3 to use to pick out the level0, level1 and level2 codes respectively.
If you want the ID's from a single row sequential, you will need an "order by" - otherwise the query could come out with all rows for level0 followed by all rows for level1 etc. If you don't mind the order then you can omit the outer select and the order by.
regards,
David -
Dc 007- Control Framework: Invalid Processing of ABAP Object Control- DUMP
Hello,
we're upgrading to ECC6 and while running ALV report i get a dump that says that i'm trying to edit a control created with ABAP objects techniques using a function module.
It worked just fine in version 46C.
Is it possible to solve the problem without re-writing the program?
Thanks
MosheI'm getting the same error when calling the below BAPI. When the BAPI gets an error, I get a shortdump.
This is being when the user selects a convert planned orders button in a custom developed report that uses the SALV_OM alv grid.
"Call BAPI to convert planned orders to production orders
CALL FUNCTION 'BAPI_PRODORD_CREATE_FROM_PLORD'
EXPORTING
planned_order = <s_output>-plnum
order_type = 'ZEPR'
* ORDER_NUMBER =
IMPORTING
production_order = ld_production_order
* PROD_ORDER_TYPE =
return = ld_return
EXCEPTIONS
OTHERS = 1. -
Situation:
I am working with an audio file approx. one bar long
I would like to loop and later merge or bounce this byte to make a longer file.
I know that I can drag the file at the top right corner to loop or check the loop box in the inspector.
I know that if I take a file that is not perfectly a measure long it will soon be offset with the measures.
I've microscoped the end of said byte to align it with end of measure yet still see that there always seems to be an imperceptible margin of error which will create offset.
Question:
To avoid imperfect looping is it better to copy the file to each new/next measure and merge the sum or is there a more precise looping technique? (I've tried "follow tempo function", it doesn't seem to make a difference)
Also, is there a shortcut to repeat pasting of byte to each next/new measure?
Thanks,
RubenI think I understand what you mean about an audio file not being perfect measure-length. For this, I like to use folders. It might not be the most elegant solution, but it works in a pinch.
See the following example. This audio file is an 8th note short of a full measure, which makes it unable to loop properly. By packing it in a folder (select region, command-F), you create a new region that can be sized to any length, and looped as desired.
http://www.digitaldroo.com/tutes/folderpack4loops.mov
-droo -
Prepare has not been completed succesfully
Hi Experts,
I started an upgrade release 4.6C to ECC 6.0 on windows 2003 db version is SQL Server 2005,
I am getting an error message at the begining of prepare phase,
I've also updated sapup.exe version and source system kernel to 2364,
how can i prevent this error,
ERROR: PREPARE has not been completed successfully.
Correct the problems reported by PREPARE otherwise
you cannot start the upgrade.
here is UpgDialog.log
Target SAP system is AHQ
Enter the SAP instance number [00]:
? INSTANCE NUMBER =
Waiting for input since 30.Eki.2008 10:31:46
> INSTANCE NUMBER = 00
Type of database system is mss
>>>>>>>>>> Input Wizard <<<<<<<<<<
Please enter up to 24 mount points for CDs.
Enter at least the mount point for the CD titled "Upgrade Master CD/DVD"
? MOUNT POINT 01 = E:\upgdvds\upgmaster_51033520\UMN_WINDOWS_I386
Reading data from "Upgrade Master CD/DVD"...
SAP UPGRADE CONTROL PROGRAM
================================
This is SAPup version 7.00/3 upgrade to release
600 of EA-APPL
600 of EA-DFPS
600 of EA-FINSERV
600 of EA-GLTRADE
600 of EA-HR
400 of EA-IPPE
600 of EA-PS
600 of EA-RETAIL
600 of ECC-DIMP
600 of ERECRUIT
600 of FI-CA
600 of FI-CAX
600 of FINBASIS
600 of INSURANCE
600 of IS-CWM
600 of IS-H
600 of IS-M
600 of IS-OIL
600 of IS-PS-CA
600 of IS-UT
600 of LSOFE
2005_1_700 of PI_BASIS
700 of SAP_ABA
700 of SAP_AP
600 of SAP_APPL
700 of SAP_BASIS
700 of SAP_BW
600 of SAP_HR
600 of SEM-BW
2005_1_700 of ST-PI
Target SAP system is AHQ, MSSQL database
? continue
? cancel
Waiting for input since 30.Eki.2008 10:34:32
> continue
ERROR: PREPARE has not been completed successfully.
Correct the problems reported by PREPARE otherwise
you cannot start the upgrade.
? continue
? cancel
And also in /usr/sap/put/log directoy these logs existent;
SAPup.log;
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
SEVERE ERROR: problems with SERVER mode - abort
...CANCELED at 20081030104921.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030105012
...end dialogue at 20081030105013
...begin dialogue at 20081030105013
...end dialogue at 20081030105015
...begin dialogue at 20081030105034
...end dialogue at 20081030105039
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105039
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030105039
...end dialogue at 20081030105041
...STARTED at 20081030105041.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030105041
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030105041
...begin dialogue at 20081030105041
...end dialogue at 20081030105104
...CANCELED at 20081030105104.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.011.
...begin dialogue at 20081030105626
...end dialogue at 20081030105627
...begin dialogue at 20081030105627
...end dialogue at 20081030105630
...begin dialogue at 20081030105711
...end dialogue at 20081030105715
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105715
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030105715
...end dialogue at 20081030105719
...CANCELED at 20081030105719.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030105752
...end dialogue at 20081030105753
...begin dialogue at 20081030105753
...end dialogue at 20081030105756
...begin dialogue at 20081030105814
...end dialogue at 20081030105818
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030105818
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030105818
...end dialogue at 20081030105824
...STARTED at 20081030105824.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030105824
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030105824
...begin dialogue at 20081030105824
...end dialogue at 20081030110026
...CANCELED at 20081030110026.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110034
...end dialogue at 20081030110035
...begin dialogue at 20081030110035
...end dialogue at 20081030110038
...begin dialogue at 20081030110054
...end dialogue at 20081030110104
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110104
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030110104
...end dialogue at 20081030110123
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110134
...end dialogue at 20081030110140
...begin dialogue at 20081030110140
...end dialogue at 20081030110143
...begin dialogue at 20081030110149
...end dialogue at 20081030110154
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110154
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030110154
...end dialogue at 20081030110155
...STARTED at 20081030110155.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030110155
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030110155
...begin dialogue at 20081030110155
...end dialogue at 20081030110328
...CANCELED at 20081030110328.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110335
...end dialogue at 20081030110335
...begin dialogue at 20081030110335
...end dialogue at 20081030110337
...begin dialogue at 20081030110342
SEVERE ERROR: problems with SERVER mode - abort
...CANCELED at 20081030110342.
************************* SAPup started in UPGRADE mode *************************
This is SAPup version 7.00/3 patch level 25.013.
...begin dialogue at 20081030110858
...end dialogue at 20081030110859
...begin dialogue at 20081030110859
...end dialogue at 20081030110901
...begin dialogue at 20081030110937
...end dialogue at 20081030110940
Reading Parameter File "C:\usr\sap\put\bin\DBSYNC.PAR" at 20081030110940
Condition level 1, total => FALSE '#if ( "MSS" == "ORA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "OPS" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "ADA" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "INF" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "DB6" )' => FALSE
Condition level 1, total => FALSE '#elseif ( "MSS" == "D4A" )' => FALSE
Condition level 1, total => TRUE '#elseif ( "MSS" == "MSS" )' => TRUE
...begin dialogue at 20081030110940
...end dialogue at 20081030110941
...STARTED at 20081030110941.
Reading Parameter File "C:\usr\sap\put\bin\TRATTR.LST" at 20081030110941
Reading Parameter File "C:\usr\sap\put\bin\TRGROUP.LST" at 20081030110941
...begin dialogue at 20081030110941
...end dialogue at 20081030110945
...CANCELED at 20081030110945.
CHANGES.LOG
MILESTONE
"BEG_IR"
"STO_IR"
"20081030104921"
"20081030104921"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105012"
"20081030105012"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105013"
"20081030105013"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105013"
"20081030105013"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105015"
"20081030105015"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105034"
"20081030105034"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105039"
"20081030105039"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105039"
"20081030105039"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105041"
"20081030105041"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030105041"
"20081030105041"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105041"
"20081030105041"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105104"
"20081030105104"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030105104"
"20081030105104"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105626"
"20081030105626"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105627"
"20081030105627"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105627"
"20081030105627"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105630"
"20081030105630"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105711"
"20081030105711"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105715"
"20081030105715"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105715"
"20081030105715"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105719"
"20081030105719"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030105719"
"20081030105719"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105752"
"20081030105752"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105753"
"20081030105753"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105753"
"20081030105753"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105756"
"20081030105756"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105814"
"20081030105814"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105818"
"20081030105818"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105818"
"20081030105818"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030105824"
"20081030105824"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030105824"
"20081030105824"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030105824"
"20081030105824"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110026"
"20081030110026"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110026"
"20081030110026"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110034"
"20081030110034"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110035"
"20081030110035"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110035"
"20081030110035"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110038"
"20081030110038"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110054"
"20081030110054"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110104"
"20081030110104"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110104"
"20081030110104"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110123"
"20081030110123"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110134"
"20081030110134"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110140"
"20081030110140"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110140"
"20081030110140"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110143"
"20081030110143"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110149"
"20081030110149"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110154"
"20081030110154"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110154"
"20081030110154"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110155"
"20081030110155"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030110155"
"20081030110155"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110155"
"20081030110155"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110328"
"20081030110328"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110328"
"20081030110328"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110335"
"20081030110335"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110335"
"20081030110335"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110335"
"20081030110335"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110337"
"20081030110337"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110342"
"20081030110342"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110342"
"20081030110342"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110858"
"20081030110858"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110859"
"20081030110859"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110859"
"20081030110859"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110901"
"20081030110901"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110937"
"20081030110937"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110940"
"20081030110940"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110940"
"20081030110940"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110941"
"20081030110941"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"STO_IR"
"20081030110941"
"20081030110941"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"DIA_IR"
"20081030110941"
"20081030110941"
"0"
"0"
"0"
"0"
MILESTONE
"END_IR"
"DIA_IR"
"20081030110945"
"20081030110945"
"0"
"0"
"0"
"0"
MILESTONE
"BEG_IR"
"STO_IR"
"20081030110945"
"20081030110945"
"0"
"0"
"0"
"0"
TOOLOUT.LOG
SAPup> Starting subprocess disp+work.exe with id 732 at 20081030103432
EXECUTING C:\usr\sap\AHQ\SYS\exe\run\disp+work.exe -V
disp+work information
kernel release 46D
kernel make variant 46D
DBMS client library SQL_Server_7.00
DBSL shared library version 46D.00
compiled on NT 4.0 1381 Service Pack 6 x86 MS VC++ 12.00
compile time Jan 14 2008 08:47:41
update level 0
patch number 2364
source id 0.2364
supported environment
database (SAP, table SVERS) 46A
46B
46C
46D
DBMS server MSSQL 6.5.213 or higher
MSSQL 7.0.1 or higher
operating system Windows NT 4.0
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
System build information:
LCHN : 955407
disp+work patch information
( 0.001) Correct cursor preservation (I) (note 307486)
( 0.002) SU53 reports always 'Check on S_TCODE SU53' (note 310513)
( 0.003) PXA: Emergency mode (note 307976)
( 0.004) Correct shortcut handling under EASY ACCESS (note 309791)
( 0.005) POST driver: no set locale (note 310076)
( 0.006) ASSIGN attr+off(len) TO <fs> (note 302214)
( 0.007) Contextmenu for tableview cells (note 309755)
( 0.008) Rfc and full screen (note 308383)
( 0.009) Dropdown listbox performance (note 307795)
( 0.010) Correct cursor preservation (II) (note 307486)
( 0.011) Spool-Patch-Collection 26 (note 92482)
( 0.012) Correct cursor preservation (III) (note 307486)
( 0.013) Correct cursor preservation (IV) (note 307486)
( 0.014) Core in dyCheckRadioGroups() (note 308958)
( 0.019) STAT: DB Resonse Time for SQL Server (note 310288)
( 0.021) Rfc authority problem (note 93254)
( 0.024) RFC extended trace information (note 311386)
( 0.027) CALL SCREEN: error 'MISMATCH DYNPRO NAME / CONTENT' (note 310186)
( 0.028) ABAP: OO-Transactions and event LOAD-OF-PROGRAM (note 312244)
( 0.029) Profile 'abap/oo_warn' suppress OO-context errors (note 182767)
( 0.031) Occasional core when reading statistics file (note 313669)
( 0.032) ABAP: unnecessary class-constructor calls (2) (note 213622)
( 0.035) Corrections in errormessage handling (sapdext) (note 312252)
( 0.040) TSTC: transaction is not an oo-transaction (note 315037)
( 0.044) F4 on checkbuttons (note 312258)
( 0.045) Core in moveleft() (note 312418)
( 0.046) Error trace: invalid dynpro dynpabsv.c 3490 (note 314373)
( 0.047) Error trace: memory conflict diagscrol.c (note 313967)
( 0.048) Iterator problem with iXML collections fixed (note 315119)
( 0.050) Invocation of not-implemented methods (note 314064)
( 0.051) Core at dynamic invoke with interface reference (note 314487)
( 0.052) GW: Avoid multiple send (note 314495)
( 0.053) Spool-Patch-Collection 27 (note 92482)
( 0.054) Printing via e-mail (note 311037)
( 0.055) User default time zone from TTZCU-TZONEDEF (note 314300)
( 0.056) Bad batch job statistic (note 315147)
( 0.057) LOOP AT SCREEN: counter field increased (note 314516)
( 0.058) Missing init. in temse (note 314094)
( 0.065) GW: shared block leak with multiple reg programs (note 309969)
( 0.067) RFC: load balancing over SAPRouter (note 316221)
( 0.068) No debugging until login while remote debugging (note 316456)
( 0.069) Open SQL: INTO CORRESPONDING with JOINs (note 315747)
( 0.071) Support 'Windows NT 5.1' (note 316188)
( 0.072) Destroyed dynpro load (note 207817)
( 0.073) Error in spool entry queue (note 316148)
( 0.074) mySAP.com workplace single signon enabling (note 177895)
( 0.075) Sap statistic destroys eye catcher (note 317178)
( 0.076) Syslog messages while printing (note 316630)
( 0.077) Performance optimization for list boxes (note 214806)
( 0.078) Loop in batch input (note 316686)
( 0.080) Loop in batch input 2 (note 316686)
( 0.081) Don't block s-messages in local update processing (note 312252)
( 0.084) Correct error message in conversion exit 'ALPHA' (note 318027)
( 0.085) Destroyed dynpro load (note 207817)
( 0.086) Print from rfc server (note 318692)
( 0.087) Unknown syntax errors after changing the kernel (note 142888)
( 0.088) RFC: error discarding unneeded tables (note 319634)
( 0.089) Sapstartsrv handle service stop and shutdown correctly (note 142100)
( 0.091) GW: Nonblocking connect problems (note 319675)
( 0.092) Tstc: transaction is not an oo-transaction (note 315037)
( 0.093) Coredump with 'INSERT LINES OF ...' (note 142100)
( 0.094) Corrupted cluster item displayed (note 318904)
( 0.096) BDC: Enable input in list screens (note 212569)
( 0.099) Hanging apps after writing core (note 320168)
( 0.102) Syntax warning for literals crossing line boundaries (note 319328)
( 0.103) Generation error at statement 'IF itab IS SUPPLIED' (note 321069)
( 0.105) Spool-Patch-Collection 28 (note 92482)
( 0.109) Several errors within footline (note 312848)
( 0.111) Check dynpro processor state (note 301406)
( 0.112) Memory usage roll area 0+1 (note 322070)
( 0.113) Sapstartsrv: GetProcessList exception, librfc32 delayload (note 142100)
( 0.114) Rfc call and default fontsize data (note 323342)
( 0.115) OBJECTS_NOT_COMPATIBLE with READ TABLE (note 323039)
( 0.116) Random syntax errors (MOVE-CORRESPONDING) (note 207149)
( 0.117) SKIP 1ST SCREEN: ignore GRAPH dynpros (note 317917)
( 0.118) Japanese IXML, table TCP0F (note 301406)
( 0.119) SE30 errors (note 170470)
( 0.121) Correct call of POV modules for comboboxes (note 323141)
( 0.122) Exception in NiExit (note 319675)
( 0.123) GW: No restart during db reconnect (note 321863)
( 0.125) TX variants: correct reset field input (note 325275)
( 0.126) ITS_LOGIN_CHECK_RFC rejected as XXPASS caller (note 324758)
( 0.129) Error message: correct cursor setting (note 318292)
( 0.130) Check dynpro processor state (II) (note 301406)
( 0.131) Correct SET FOCUS CONTROL for NO-PAI (note 322455)
( 0.132) Init tcview components (note 323686)
( 0.133) BDC: No loosing track of data during F4-Help (note 323061)
( 0.136) BDC: Avoid duplicate messages in log (note 324490)
( 0.138) Resize: docking control - dynpro (note 323974)
( 0.139) GW: Secinfo for start of external programs (note 323925)
( 0.140) False error texts for workplace ticket logon (note 325222)
( 0.141) "user locked" for logon attempt at CUA master system (note 325213)
( 0.143) HPL2 driver: unreadable text for green/red (note 323460)
( 0.146) Loop of dispatcher (note 325559)
( 0.148) Spool-Patch-Collection 29 (note 92482)
( 0.149) Control Framework global flush mode (note 316243)
( 0.150) TX variants: correct reset field input (II) (note 325275)
( 0.152) Em detach before process restart (note 326876)
( 0.153) Workplace: multiple logon popup for wingui sessions (note 326604)
( 0.154) ABAP Debugger: Rollback before restart (note 325903)
( 0.156) Conversion X to STRING (note 327086)
( 0.158) Bugfix new-page print on + message (note 107321)
( 0.159) IXML: coredump when parsing empty XML document (note 326888)
( 0.160) Resume in current screen after returning from exit module (note 327803)
( 0.161) SORT: close extract file, if runtime error occurs (note 328691)
( 0.162) Adapt ABAP runtime to new signal handling (note 329091)
( 0.163) BDC: corresponding screen to bsdup-entry in dybimsgi (note 330071)
( 0.164) Stat-file is not deleted in old 4.6 releases (note 329603)
( 0.169) Do not change loopheader during help processing (note 330761)
( 0.171) Disabling GUI in aRFC when called from tRFC (note 329811)
( 0.174) Test dynpro: do not call POV modules (note 332538)
( 0.175) No commit during wait in update task (note 332077)
( 0.176) Printing frames in text mode (note 320792)
( 0.177) Spool-Patch-Collection 30 (note 92482)
( 0.178) TSTC transaction is not an oo-transaction (note 315037)
( 0.179) RFC-Import of deep structures failed (note 333694)
( 0.180) STRING_BAD_REF in control break processing (note 332663)
( 0.181) Increase structure stack (note 332500)
( 0.184) PXA: initialization (note 160875)
( 0.185) PXA_NO_FREE_SPACE (note 147568)
( 0.186) Update task: increase vb2Cnt for update type 5 (note 333878)
( 0.187) Correct handling of empty loop lines (note 334886)
( 0.188) TX variants: correct reset field input (III) (note 325275)
( 0.189) EmHyperContextCreate() => alreday exists (note 334389)
( 0.192) Default cursor: reset cursor offset (note 334951)
( 0.194) Invalid client index of sap gateway (note 333949)
( 0.195) RFC authority check failed (note 93254)
( 0.196) BDC: No loosing track of data after F4-Help (note 323061)
( 0.197) ABAP: optimized dynamic SELECT clauses (note 324772)
( 0.198) Bugfix new-page print on + message (note 107321)
( 0.199) Bugfix displaying printer name after print (note 107321)
( 0.201) Error recovery (in ni datagram) after workprocess-restart (note 335967)
( 0.207) Diag: correct list size (note 337298)
( 0.209) GW: memory block freed twice (note 337957)
( 0.210) Incorrect logon ticket expiration calculation (note 337794)
( 0.218) Errortrace: invalid offset (dybasfield.c 95) (note 337820)
( 0.219) Deactivate LIST TO MEMORY on selection screen (note 313558)
( 0.220) Dbbmng0.c: generic invalidation of shared buffer objects (note 338451)
( 0.221) Itab operations on tableview-controls (note 339270)
( 0.222) GW: RFC attached gui (note 337425)
( 0.223) ASSIGN: set output length accurately (note 338925)
( 0.224) Tabstrip pages and wrong scroll offset (note 339469)
( 0.225) Set pf-status excluding and rollout (note 338954)
( 0.226) Auth problems with 20 characters transactions (note 339913)
( 0.227) Batch input: new algorithm for QID-generation (note 338246)
( 0.229) Inappropriate short dump ZDATE_ILLEGAL_LOCTIME (note 323954)
( 0.230) Print of a list dumps (note 338994)
( 0.231) Archive device (note 339659)
( 0.232) S-messages in CTU-log (note 339302)
( 0.238) Correct trace SET PARAMETER (note 340096)
( 0.240) Print of a list dumps (II) (note 338994)
( 0.242) Start Row Start Column for Dynproresizing (note 351685)
( 0.243) GW: Bad em context handling (note 351526)
( 0.244) SORT AS TEXT: length too short (note 350526)
( 0.245) Get cursor information on pushbutton (note 351890)
( 0.247) ABAP: Slin default check; type I vs. type P (note 351976)
( 0.248) GW: CCMS Monitoring Patch-Collection 1 (note 202591)
( 0.249) Short dump CALL_TRANSACTION_LOCKED (note 350360)
( 0.250) Controls and list processing (note 352065)
( 0.251) Blanks in authorization values (note 207196)
( 0.252) Tableview line/column selection (note 350363)
( 0.253) Spool-Patch-Collection 31 (note 352269)
( 0.254) Decrease and increase for dynpro and window (note 352542)
( 0.255) ABAP Debugger: Avoid DEBUGGER_ILLEGAL_VALUE in RFC-Debug. (note 182989)
( 0.256) Incomplete DATA in D010INC and D010TAB (note 352480)
( 0.257) Diag: warning and resize (note 212524)
( 0.258) Workplace: provide logon ticket for X.509 logon (note 350776)
( 0.260) StartRow StartColumn for Dynproresizing (note 351685)
( 0.261) EmHyperContexts: reduce memory consumption (note 353103)
( 0.262) Invalid focus memory (note 353496)
( 0.263) EmHyperContexts: reduce memory consumption (II) (note 353103)
( 0.266) Slow SetQoS due to unnecessary DNS query (note 180940)
( 0.268) ABAP-Exception-Handling: Internal State-Stack (note 350146)
( 0.269) BDC: no user command allowed on SAPMSYST 0040 (note 163639)
( 0.270) Wrong portability warnings from extended syntax check (note 353681)
( 0.271) Passing EXP-IMP parameters in RFC calls (note 352629)
( 0.272) Spool-Patch-Collection 31a (note 352269)
( 0.273) Modal level and suppress dialog (note 355616)
( 0.274) DBIF_RSQL_INVALID_REQUEST with very old cluster records (note 353651)
( 0.275) Horizontal radiobutton groups (note 355260)
( 0.276) Proportional cut for variable Dynpro-objects (note 351685)
( 0.277) Hostname resolution blocks processes (note 356788)
( 0.278) Tabstrip pages and wrong scroll offset (note 339469)
( 0.280) Core in DiagiTableHeader (note 159421)
( 0.281) GW: Bad statistic after summer time switch (note 353893)
( 0.283) CPIC-Timeout for frontend printing (note 352269)
( 0.284) List scrollbar and docking control (note 357241)
( 0.285) Sy-SubRc 8 with SELECT SINGLE on logic cluster table (note 355714)
( 0.287) Missing entry in table FIDO (note 357019)
( 0.290) BDC: conversion of old batch-input logfiles (note 356758)
( 0.293) Invalid sapgui data (note 358681)
( 0.294) Reading of ASTAT records fails in 4.6D (note 358532)
( 0.295) ABAP: Loop in function LookForFref (note 357698)
( 0.297) Muliconnect error reporting (note 358171)
( 0.298) RFC: data dependent read error (note 358557)
( 0.300) Protect against 'error in datastream' (note 359511)
( 0.301) Treatment of looplines by loc. horiz. resize (note 212861)
( 0.302) Initial values with DynpValuesUpdate (note 359873)
( 0.303) ABAP: warning for duplicate keys removed (note 359114)
( 0.304) Core dump when calling RfcClose (note 359865)
( 0.306) Suppression of unnecessary syslog messages (note 359523)
( 0.308) System Core Dump with F4-Button in R/3-Dialog(modal) setting (note 212861)
( 0.309) Core dump in RFC engine (note 353136)
( 0.311) Start EASY-ACCESS only for dialog sessions (note 360980)
( 0.314) Check if dynpro exists before access it (note 361120)
( 0.315) Optimize concatenate for STRING (note 327185)
( 0.317) New RFC logon method 'external identification' (note 358469)
( 0.319) List scrolling: last line missing (note 362181)
( 0.320) GW: Set locale in update task (note 360971)
( 0.321) SORT: avoid EXSORT_TOO_MANY_PARALLEL_SORTS (note 361532)
( 0.322) Extended syntax check with BETWEEN ... AND (note 361470)
( 0.323) ICMAN fails to open event flags for HTTP connections (note 360696)
( 0.326) Open SQL: improved statement generation for UPTO (note 361392)
( 0.327) Check (ABAP_ASSERT) in ASSIGN to avoid core (note 363059)
( 0.329) Bad NOWP request (note 365156)
( 0.330) ABAP; SCAN STRUCTURE: error in SELECT-ENDSELECT logic (note 363992)
( 0.331) Native SQL: return code for EXECUTE PROCEDURE (note 364707)
( 0.332) Semaphore error in ASTAT (note 363499)
( 0.333) Printing with format LETTER (note 363624)
( 0.334) Problems with missing or short quickinfo (note 363394)
( 0.335) Parameters in macro _splitpathU swapped (note 365337)
( 0.339) Modified length mismatch (note 207817)
( 0.340) Problems with missing or short quickinfo (2) (note 363394)
( 0.341) Errortrace invalid value dybas.c 0179 (note 337820)
( 0.342) Errortrace invalid parameter dynpdiag 1131 (note 337820)
( 0.343) Errortrace dytracefocus invalid container (note 353496)
( 0.346) Spool-Patch-Collection 32 (note 352269)
( 0.347) Invalid focus memory 2 (note 353496)
( 0.348) Prevent duplicate RFC struct parameter transmission (note 365916)
( 0.351) Native SQL: memory leak for stored procedures (note 367509)
( 0.352) Resizing side to side and one below other Dynpro-Objects (note 367811)
( 0.353) Check ztta/dynpro_area (note 167229)
( 0.354) Problems with missing or short quickinfo (3) (note 363394)
( 0.355) GW: Bad NOWP request II (note 365156)
( 0.358) Breakpoint in ABAP Debugger at CONTINUE (note 368433)
( 0.359) Errortrace: should not happen (dycuahlp 1661) (note 369415)
( 0.360) Reactivate suspended clients (note 367384)
( 0.361) Disable persistent trace for RFC-Library (note 364034)
( 0.365) Large file support (note 330992)
( 0.366) IMPORT: avoid IMPORT_INIT_DECOMPRESS_FAILES (note 370053)
( 0.367) BAPI_USER_CHANGE returns wrong/blank error message (note 369761)
( 0.368) ABAP debugger: field display and global TABLES-parameters (note 370103)
( 0.369) ABAP debugger: empty source display (note 370717)
( 0.370) Saplicense: license buffer not initialized (note 371301)
( 0.371) List token in SELECT (note 370587)
( 0.373) GW: Duplicate conversation ids in gateway work processes (note 371481)
( 0.375) Dynamic Type at CREATE DATA (note 371607)
( 0.376) Printing selection page & long transaction (note 370661)
( 0.377) Library iXML: correction of CDATA size problem (note 371846)
( 0.378) DEC field input for none DDIC fields (note 373047)
( 0.379) Spool-Patch-Collection 33 (note 352269)
( 0.380) C-Call ABAP_CALLSTACK (note 371779)
( 0.381) Loop during decompression of corrupted Sources/Loads (note 374200)
( 0.382) Extended table compression for certain RFC connections (note 373452)
( 0.383) SORT: avoid EXSORT_TOO_MANY_PARALLEL_SORTS and recursion (note 361532)
( 0.384) PostScript error with TrueType fonts (note 373604)
( 0.385) XML-Import failed after empty structure tags (note 374447)
( 0.386) Disable QoS support by default (note 180940)
( 0.387) Message display type (note 368333)
( 0.389) DEC field input for none DDIC fields II (note 373047)
( 0.390) Long running report (note 373343)
( 0.391) Illegal request looping in dispatcher (note 373345)
( 0.394) Fix printing selection page & long transaction (note 370661)
( 0.397) Reserve address space for Extended Memory (note 373326)
( 0.399) VALUE /namespace/const (note 371720)
( 0.402) DYNG: get translated buttontexts from D021T (note 363394)
( 0.403) Correct returncode for SET_DYNP_FIELD_VALUE (note 374941)
( 0.404) Refresh control from screen (note 375251)
( 0.406) Receive result of aRFC (note 375356)
( 0.410) Disp+Work doesn't start up (note 376242)
( 0.414) DEC field input for none DDIC fields (note 373047)
( 0.415) Core dump in GenViewGetPbagRudi (note 375055)
( 0.416) DBIF_REPO_PART_NOT_FOUND during Garbage-Collection (note 374884)
( 0.417) Control focus correction (note 374510)
( 0.418) Title problems (note 374560)
( 0.419) Window width > 255 cause list problems (note 375856)
( 0.420) IS REQUESTED/SUPPLIED and RETURNING parameter (note 375329)
( 0.423) DEC field input for none DDIC fields (note 373047)
( 0.424) Core in appl info (note 376906)
( 0.425) Core in DiagIConvert, if trace level 3 (note 377184)
( 0.426) Correction for Spool-Patch-Collection 33 (note 352269)
( 0.429) Change default for cursor preservation (note 378706)
( 0.430) Error trace from dyariftb() (note 378093)
( 0.431) Enqueue table overflow, syslog message corrected (note 378682)
( 0.433) DEC field input for none DDIC fields (note 373047)
( 0.434) Illegal chars set spooljob to error (note 379119)
( 0.435) Debugger: data references and tables of type I (note 378838)
( 0.436) Set DISPLAY AGAIN in TH (note 380164)
( 0.437) Prepare: several mySAP.com components in one DB (note 379572)
( 0.439) Workplace: disable password logon (note 379081)
( 0.445) DiagSetCodepage() failed (note 382240)
( 0.446) Sapstartsrv update available.log on Start/Stop (note 142100)
( 0.447) Ldapreg: ITS LDAP registration (note 379691)
( 0.448) GW: Wp stuck in PRIV mode (note 381870)
( 0.449) Too many invalidations on USRBF2 (note 319727)
( 0.450) Correct static focus on subscreens (note 380809)
( 0.451) Correct HOLD DATA message (note 381528)
( 0.452) Trace DYNP_SET/GET_STATUS (note 381694)
( 0.453) Init screen buffer parameters (note 382032)
( 0.454) No core in dypov_treatDpovtabRow (note 381221)
( 0.455) Server shutdown after bind error (note 382440)
( 0.457) Handling of fatally corrupted cluster records (note 381968)
( 0.466) EXPORT: dynamic export of strings (note 384694)
( 0.467) Message in help: no core dump (note 384639)
( 0.468) Pull up other objects down of table after TABLE_PBO_DONE (note 383033)
( 0.469) Tablecontrol init and context (note 373977)
( 0.470) Correction of the nls locale check tool (note 40815)
( 0.471) GW: Missing aRFC response (note 384015)
( 0.472) GW: Core during write of statistic (note 384433)
( 0.473) Wp stuck in PRIV mode (II) (note 381870)
( 0.474) Shared Pool disturbed corrected (note 384810)
( 0.477) SORT/EXTRACT: large file support (note 384257)
( 0.478) Codepage problem: sap8000 (shift_jis) (note 384947)
( 0.479) Active/Inactive-Handling (note 385628)
( 0.480) Sporadic logon failures in batch processing (note 385894)
( 0.483) GW: Free unallocated memory (note 387747)
( 0.484) SORT/EXTRACT: large file support (II) (note 384257)
( 0.487) Open SQL: several minor errors (note 386783)
( 0.489) RABAX no dbrollback and dbcommit at core (note 386268)
( 0.490) C-call DY_GET_S_MESSAGE available (note 383089)
( 0.491) Correct I message for batch input (note 386661)
( 0.492) Do not skip message popup (note 385147)
( 0.493) Async RFC: set size of full screen (note 385132)
( 0.494) Correct error messages for CALL SUBSCREEN (note 386674)
( 0.495) Logon tickets slightly too long valid (note 387595)
( 0.496) Format error during output of empty strings (note 385796)
( 0.497) RFC: patch collection (46D) (note 387366)
( 0.498) Method calls in arithmetics (note 387066)
( 0.499) Reallocate the number of boxes for resizing (note 388988)
( 0.500) Generate correct forkey selects in dynpro (note 388699)
( 0.501) Destroyed dynpro load (note 207817)
( 0.502) Open a new audit file next day after maxsize event (note 321148)
( 0.503) Delete audit files with extended filenames (SM18) (note 370829)
( 0.504) DiagSetCodepage() failed (note 382240)
( 0.507) Missing arfc response (II) (note 384015)
( 0.508) Generation of very long sources: repeating END_INBUF (note 389041)
( 0.509) Correct hold control framework focus (note 389364)
( 0.510) BDC: F1 or F4-request in bdcdata (note 323061)
( 0.511) Overflow of memory (note 370661)
( 0.512) PARAMETERS referencing a named DDIC include (note 389940)
( 0.515) DB2/390: default dbs/db2/use_hints=abap->1 (note 162034)
( 0.516) Recovery from NI-error after WP-restart (note 335967)
( 0.517) Avoid RFC server timeout (note 390219)
( 0.522) Avoid core in ABAP debugger by bad string references (note 391169)
( 0.523) Keep scrollposition (note 391871)
( 0.524) ABAP debugger: Display header for bad object reference (note 391187)
( 0.530) Enqueue traces during transaction reset (note 392873)
( 0.531) Garbage-Collection beyond 600MB (note 393378)
( 0.534) Enqueue traces during transaction reset (II) (note 392873)
( 0.535) CPICFAIL in smq1 after kernel upgrade (note 394549)
( 0.536) APO: correct internal table processing in COM routines (note 395695)
( 0.537) DYNPRO_FIELD_CONVERSION on Get Parameter (output) (note 395450)
( 0.538) Core in dyGetDataR() (note 395299)
( 0.540) Core in DpFreeResource after restart (note 394454)
( 0.542) Restore of sy.datar when popping screen (note 393511)
( 0.543) Open SQL: Memory leak when updating with %_HINTS (note 393897)
( 0.547) List scrolling: last line missing(2) (note 362181)
( 0.548) DiagSetCodepage() failed (note 382240)
( 0.549) Limit on number of sessions per logon (note 392369)
( 0.552) ABAP: error in string access with offset or length (note 396800)
( 0.553) Wrong portability warnings from SLIN (note 353681)
( 0.555) SY-VLINE in Thai on AS/400 (note 391627)
( 0.557) Unsuccessful READ on a SORTED TABLE (note 395205)
( 0.559) Sapstartsrv shutdown one process after the other (note 142100)
( 0.560) GW: COMPUTE_INT_TIMES_OVERFLOW in SAPLSALK (note 395671)
( 0.561) MS: improved trace features (note 396750)
( 0.562) ABAP: PERFORM .. CHANGING VALUE(<itab-line>-comp) (note 399078)
( 0.564) No hint generation in case of SELECT SINGLE (note 397170)
( 0.565) READ TABLE with attribute keys (note 399263)
( 0.566) Error in msg-server communication (note 398525)
( 0.568) Spool-Patch-Collection 34 (note 352269)
( 0.569) GW: Destroyed update start message (note 157840)
( 0.576) ABAP debugger: display active calls (note 399920)
( 0.577) ABAP debugger: display of interface aliases (note 399915)
( 0.578) ABAP: SET LOCALE and SUBMIT / CALL TRANSACTION (note 399918)
( 0.579) Enforce minimal patch level for database library (note 400216)
( 0.581) Ticket logon resets initial flag (password) (note 402076)
( 0.582) New translations cause locks on D020 (note 36795)
( 0.585) Catching of problems during string <-> char handling (note 402340)
( 0.586) GET LOCALE: language incorrect (note 402801)
( 0.587) Icons are not printed properly (note 402967)
( 0.588) Em context destroyed after exception (note 403562)
( 0.589) Dummy call: super constructor (note 401553)
( 0.590) Visibility of local types (note 401910)
( 0.591) Coredump with READ TABLE and float attributes (note 400516)
( 0.592) Offset/length specifiers in a table key definition (note 402255)
( 0.594) Resize: docking control - dynpro (note 323974)
( 0.598) Avoid inconsistent overall source time stamp (note 405821)
( 0.599) PXA: correct unfound object cache & statistic counters (note 406075)
( 0.600) SY-VLINE and JAVASCRIPT in Thai on AS/400 (note 391627)
( 0.601) Avoid inconsistent overall source time stamp (II) (note 405821)
( 0.605) RFC_DEBUGGING_NO_DIALOG_USER (note 407471)
( 0.606) Core in dyAbapGetContainerPosition (note 405930)
( 0.607) X.509 certificate logon: timezone not set (note 408601)
( 0.608) Unsuccessful READ on a SORTED TABLE (II) (note 409175)
( 0.609) IPC, max shm size detection accelerated (note 406738)
( 0.610) Graphical characters and page borders (note 406673)
( 0.611) SE30: close measurement on /n (note 381500)
( 0.612) Detail selection does not work correct (note 400090)
( 0.613) Negative value for hdcurrow is not permitted (note 352542)
( 0.624) Cutting terminal names (note 412628)
( 0.625) Update debugging (note 336925)
( 0.626) Control for Table-Control in Resizing is wrong (note 388988)
( 0.627) Correct treatment of field symbols (note 406306)
( 0.629) Init params of ab_ListGetFieldName (local field symbols) (note 413506)
( 0.630) Open SQL: more than 255 alias names in SELECT list (note 411136)
( 0.631) Open SQL: wrong SY-DBCNT for FETCH NEXT (note 412399)
( 0.632) Core in db_blob (note 412063)
( 0.633) Core in DiagGetWindowDimension (note 412168)
( 0.634) Core by 'Display current statement' in debugger (LREF) (note 411673)
( 0.636) Coredump in PfOpenScratchFile (note 414242)
( 0.637) VALUE class=>const (note 413384)
( 0.639) Hebrew Sapscript printing causes signal 11 (note 155261)
( 0.640) Workarea change in case of SELECT SINGLE with SY-SUBRC 4 (note 410175)
( 0.641) Function DB_DBSCHEMA returns correct result now (note 411971)
( 0.642) Wrong syntax error at literals in macros (note 411757)
( 0.643) Change of an interface (note 411769)
( 0.647) Dbbuf: restrict rtbb/buffer_length to 200000 [kB] (note 414220)
( 0.649) Inserted option WAN_CONN into RfcOpenEx (note 415169)
( 0.650) SU01: error texts for invalid passwords (note 369761)
( 0.651) CONVERT TIME STAMP... for 9999/31/12 23:59:59 (note 401610)
( 0.653) Text of check- and radiobuttons with icon (note 414703)
( 0.654) MESSAGE ... INTO no rabax at message x (note 408740)
( 0.655) New list line at program load (note 412142)
( 0.656) Displaying frames in lists (note 412787)
( 0.657) Selection page and empty report (note 370661)
( 0.658) VMIT (NT): higher precision (note 414135)
( 0.659) Runtime error DSTEP_WRONG_PROGRAM (note 416350)
( 0.660) Core in csulzh.c (note 413899)
( 0.661) Msg_server accept ad-msg opcode 60 AD_SELFIDENT (note 415447)
( 0.662) Highlighting in Hebrew list printing (note 353987)
( 0.663) Extended syntax check with BETWEEN ... AND (2) (note 361470)
( 0.664) Breakpoint at (RFC) function module (note 414952)
( 0.665) Don't break iXML because of missing character (note 410929)
( 0.667) WP opmode switch (note 415840)
( 0.674) Msg_server accept ad-msg opcode 60 AD_SELFIDENT (note 415447)
( 0.675) Duplicate key in VBMOD (note 416961)
( 0.676) Trace spa/gpa memory overflow (note 34533)
( 0.677) Dbbuf: check rtbb/buffer_length and rtbb/max_tables (note 414220)
( 0.678) Display '?' in DropdownListboxes (note 417405)
( 0.679) Correct call dialog for system messages (I) (note 416053)
( 0.680) Correct call dialog for system messages (II) (note 417096)
( 0.682) Memory leak in short storage (MEMSAV) (note 419819)
( 0.683) Spooler C-call info msg in trace (note 418740)
( 0.684) Dithering of color bitmaps (note 410727)
( 0.685) Standalone enqueue server prepared (note 419283)
( 0.686) Correction of the nls locale check tool (note 40815)
( 0.687) System Core Dump in C-Destructors of ABAP Objects (note 416163)
( 0.688) QHi Experts,
After i tried a few times, i can successfully start prepare with upgrade asistant monitor - Administrator >> Start Prepare,
Thanks
Maybe you are looking for
-
Send Report output as Email attachment (PDF)
Hi Experts, i am trying to send the contents of an internal table from my report as email using PDF attachment. I have coded the logic and i get the attachment in the email. When i try to open the attachement, i cannot open it. The message i get is
-
Transparent gateway to Sybase: connection error
I have been trying with little success to set up a transparent gateway to a sybase server. The gateway is an NT 4 workstation, with an oracle server 8.1.7 installed. The sybase server is an ASE 12.0 on a Solaris 8 box. Are these versions of the produ
-
BIEE 10.1.3.3.2 do not show dimension member name
after importing essbase outline, the decentdant name only show in the format (Gen n, Dimension_name), but not the real member name. e.g. when using the Demo.Basic database in the Essbase installation, the next generation of Market dimension show in B
-
Hi all, I have different requirement, Please find the below and give me the best suggestion.. I will receive the no.of files XML file from Sources [I donu2019t know how many file I receive, it may be 5 or 10 or 20], after end of the day I need to col
-
When I try to download a song I receive the following error "A required component is not installed. Please repair or reinstall (-42404). I have tried to reinstall and still receive the same error.