ABAP Mapping Program
Hello Friends,
Can any one give me small example how the ABAP mapping look like.
Thank You & Regards
Satish
Hi,
The how to guide on ABAP mapping should help.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
Regards,
Bhavesh
Similar Messages
-
ABAP MAPPING PROGRAM TRANSPORTATION ISSUE
Hi Experts,
Our issue is as following:
Already one ABAP mapping program is there in our DEV and in QA also.
Now we have changes the code according to some requirement.
Now we need to reflect the same in QA also.
For that I have certain doubts.
1) after releasing the request number in R/3, will it effect there in integration builder of the QA?
2) Is there any need to do in ADMINISTRATION to reflect the same?
Please revert urgenly.
Regards
sreenihi barry,
thanks a lot . we have released it into integration it is working fine.
thanks once again and i wll reward points also.
I think you can tell my one more doubt is as:
I have one new ABAP mapping program which is not used till now in any interface mapping in ID of XI.
now want use this my integration builder ID in as mapping program.
in this case is any requirement to enable the same in Integration ADMINISTRATION tab.
plz clarify me.
regards
sreeni -
How to enable ABAP Mapping Program in Integration Builder
i have changed ABAP mapping Program in my DEV. Now i want teransport it to INT server.
After releasing it in DEv, it should go through request number.
but to enable the same mapping in integration builder i think we need to some thing in ADMInistration of integration builder.
plz tell me what to do.
regards
sreeniHi kancham sreenivasulu ,
These web-sites may help u solving u'r problem:
How 2 connect non SAP RFC-Programs with XI
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0a8949b-098d-2910-2b8e-b5e9b7daeb26
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/6f1741b393f26fe10000000a1550b0/content.htm
http://help.sap.com/bp_bpmv130/Documentation/Planning/HighAvailability.pdf
http://www.erpgenie.com/netweaver/xi/XI%20Service%20Packs%20Described.doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/704357d9-ce6e-2910-f085-bb1a238b6330
cheers!
gyanaraj
*****Pls reward points if u find this useful -
Variable Substitution not working when using ABAP mapping
Hi all,
I am doing an IDoc to File scenario.
Due to some complex mapping requirements, i had to use ABAP mapping for IDoc to File ( IDoc : SHPMNT05)
There is also one more requirement where in i need to generate the receiver filename dynamically
i.e the filename is of the form :
GW-XYZ-DD/MM/YYYY.csv
Where
XYZ is the Shipment number (E1EDT20- TKNUM)
DD/MM/YYYY is the IDOC creation date in ECC (EDIDC-CREDAT)
so i used the variable substitution option in receiver file adapter.
But its not working.
Is there any limitation for using the variable Substitution, doesnt variable substitution work in case of ABAP mapping?
Regards,
Loveena.Hi,
u written ABAP mapping program to get the file name in the required format ,
is it rt?
when u test it at message mapping(including ABAP map program)
u get the the required format of file name in the one of target filed.
if that was fine, please check the variable substituiton parameters at receiver file adapter.
i mean, are u maintain variable name and refernece.
u have to specify the payload information.
warm regards
mahesh. -
How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0).
Hi,
I am looking for this document: How To Guide on ABAP mapping (How to Use ABAP-Mapping in XI 3.0), and not able to find it.
Can anybody please point me the location, to look for, or post the document.
Thanks,
NamadevHi Namadev Chillal ,
These r the links containing PDF docs which u r looking for:
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm -
Hi ,
i am using the following ABAP mapping program
method if_mapping~execute .
data: t_edidc type table of edi_dc40,
ls_edidc type edi_dc40,
ls_edidc_h type edi_dc40,
t_edidd type table of edi_dd40,
ls_edidd_h type edi_dd40,
ls_idx_xmb type idx_xmb,
t_result type string,
t_resultc type string,
t_resultd type string.
data: ls_idx1 type idxporsm59.
data: t_segtyp type table of edilsegtyp,
el_segtyp type edilsegtyp,
el_released type segdefrel,
el_error_text type string.
=======================
0. parse input document
=======================
initialize iXML
type-pools: ixml.
break-point.
class cl_ixml definition load.
create main factory
data: ixmlfactory type ref to if_ixml.
break-point.
ixmlfactory = cl_ixml=>create( ).
create stream factory
data: streamfactory type ref to if_ixml_stream_factory.
streamfactory = ixmlfactory->create_stream_factory( ).
create input stream
data: istream type ref to if_ixml_istream.
istream = streamfactory->create_istream_xstring( source ).
initialize input document
data: idocument type ref to if_ixml_document.
idocument = ixmlfactory->create_document( ).
parse input document
data: iparser type ref to if_ixml_parser.
iparser = ixmlfactory->create_parser( stream_factory = streamfactory
istream = istream
document = idocument ).
iparser->parse( ).
=================================================
1. get IDoc header data and connection parameters
=================================================
data: el_message_id type sxmsguid.
el_message_id = param->get( if_mapping_param=>message_id ).
data: el_element type ref to if_ixml_element.
el_element = idocument->find_from_name( 'TABNAM' ).
ls_edidc-tabnam = el_element->get_value( ).
el_element = idocument->find_from_name( 'MANDT' ).
ls_edidc-mandt = el_element->get_value( ).
el_element = idocument->find_from_name( 'DOCNUM' ).
ls_edidc-docnum = el_element->get_value( ).
el_element = idocument->find_from_name( 'STATUS' ).
ls_edidc-status = el_element->get_value( ).
el_element = idocument->find_from_name( 'OUTMOD' ).
ls_edidc-outmod = el_element->get_value( ).
el_element = idocument->find_from_name( 'TEST' ).
if not el_element is initial.
ls_edidc-test = el_element->get_value( ).
endif.
el_element = idocument->find_from_name( 'IDOCTYP' ).
ls_edidc-idoctyp = el_element->get_value( ).
el_element = idocument->find_from_name( 'CIMTYP' ).
if not el_element is initial.
ls_edidc-cimtyp = el_element->get_value( ).
endif.
el_element = idocument->find_from_name( 'MESTYP' ).
ls_edidc-mestyp = el_element->get_value( ).
el_element = idocument->find_from_name( 'STDVRS' ).
if not el_element is initial.
ls_edidc-stdvrs = el_element->get_value( ).
endif.
el_element = idocument->find_from_name( 'STD' ).
if not el_element is initial.
ls_edidc-std = el_element->get_value( ).
endif.
el_element = idocument->find_from_name( 'STDMES' ).
ls_edidc-stdmes = el_element->get_value( ).
el_element = idocument->find_from_name( 'SNDPOR' ).
ls_edidc-sndpor = el_element->get_value( ).
el_element = idocument->find_from_name( 'SNDPRT' ).
ls_edidc-sndprt = el_element->get_value( ).
el_element = idocument->find_from_name( 'SNDPRN' ).
ls_edidc-sndprn = el_element->get_value( ).
el_element = idocument->find_from_name( 'RCVPOR' ).
ls_edidc-rcvpor = el_element->get_value( ).
el_element = idocument->find_from_name( 'RCVPRT' ).
ls_edidc-rcvprt = el_element->get_value( ).
el_element = idocument->find_from_name( 'RCVPRN' ).
ls_edidc-rcvprn = el_element->get_value( ).
el_element = idocument->find_from_name( 'CREDAT' ).
ls_edidc-credat = el_element->get_value( ).
el_element = idocument->find_from_name( 'CRETIM' ).
ls_edidc-cretim = el_element->get_value( ).
el_element = idocument->find_from_name( 'SERIAL' ).
ls_edidc-serial = el_element->get_value( ).
ls_edidc-direct = '2'.
move-corresponding ls_edidc to ls_idx_xmb.
Connection data to application system to get IDoc metadata
select single * from idxporsm59 into ls_idx1
where port = ls_edidc-sndpor
and client = ls_edidc-mandt.
ls_idx_xmb-port = ls_edidc-sndpor.
ls_idx_xmb-rfcdest = 'NONE'. "not necessary
Get DOCREL and SAPREL
el_element = idocument->find_from_name( 'DOCREL' ).
if not el_element is initial.
ls_edidc-docrel = el_element->get_value( ).
else.
select segtyp into table t_segtyp from idxidocsyn
where port = ls_edidc-sndpor
and idoctyp = ls_edidc-idoctyp
and cimtyp = ls_edidc-cimtyp.
loop at t_segtyp into el_segtyp.
select released into el_released from idxedisdef
where port = ls_edidc-sndpor
and segtyp = el_segtyp
and actrelease = 'X'.
endselect.
if el_released gt ls_edidc-docrel.
ls_edidc-docrel = el_released.
endif.
endloop.
endif.
======================================
2. convert XML to IDoc table structure
======================================
break-point.
call function 'IDX_XML_TO_IDOC'
exporting
xml_data = source
guid = el_message_id
edidc40 = ls_edidc
idx_xmb = ls_idx_xmb
typ_def = 'X'
tables
idoc_control_40 = t_edidc
idoc_data_40 = t_edidd
exceptions
unknown_xml = 1
customizing_error = 2
no_data_found = 3
syntax_error = 4
others = 5.
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
To keep the original DOCNUM uncomment the following 8 lines of coding
Otherwise a new DOCNUM will be created
LOOP AT t_edidc into ls_edidc_h.
ls_edidc_h-DOCNUM = ls_edidc-DOCNUM.
modify t_edidc from ls_edidc_h.
ENDLOOP.
LOOP AT t_edidd into ls_edidd_h.
ls_edidd_h-DOCNUM = ls_edidc-DOCNUM.
modify t_edidd from ls_edidd_h.
ENDLOOP.
=========================================
3. convert IDoc table structure to string
=========================================
call function 'ZSOTR_SERV_TABLE_TO_STRING'
EXPORTING
FLAG_NO_LINE_BREAKS = ' '
LINE_LENGTH = 0
LANGU = SY-LANGU
importing
text = t_resultc
tables
text_tab = t_edidc.
convert IDoc table structure to string
call function 'ZSOTR_SERV_TABLE_TO_STRING'
EXPORTING
FLAG_NO_LINE_BREAKS = ' '
LINE_LENGTH = 0
LANGU = SY-LANGU
importing
text = t_resultd
tables
text_tab = t_edidd.
concatenate t_resultc t_resultd into t_result.
convert string to xstring
call function 'SCMS_STRING_TO_XSTRING'
exporting
text = t_result
MIMETYPE = ' '
ENCODING =
importing
buffer = result.
EXCEPTIONS
FAILED = 1
OTHERS = 2
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endmethod.
<b> i am getting the following parse error in FM IDX_XML_TO_IDOC :
" unexpected symbol; expected '<', '</', entity reference, character data, CDATA section, processing instruction or comment "
can anybody help
points will be given
Regards</b>HI,
is it possible that you have to use "-" instead of "=" in this [ixmlfactory = cl_ixml=>create( ).] line ?
regards,
gordon -
ABAP Mapping - Message shown in Standard Change List Process Log
Hi
I am working with ABAP Mapping program. I had created ABAP class using ABAP workbench. Before this, in exchangeProfile..data was provided for com.sap.aii.repository.mapping.additionaltypes ==>> as " R3_ABAP|Abap-class;R3_XSLT|XSL (ABAP Engine) " and 'Saved'.
In Interface Mapping, after providing the Class Name under 'Mapping Program' and activated. After activation (Standard Change List), it is showing the following messages under 'Processing Log'.
--> Standard Change List - Process Log message
Activation of the change list canceled Check result for Interface Mapping IM_ABAP_MAPPING | http://ABAP_Mapping_SREE: Type R3_ABAP of
program ZSREETEST is invalid because it is not registered in the exchange profile . Check the values for the exchange profile parameter
IntegrationBuilder.Repository.com.sap.aii.repository.mapping.additionaltypes
--> End of Log message
Can some one please guide me in resolving the ABAP mapping issue.
Thanks in advance.
..SreeSree,
The log says that there is ABAP mapping included in your exchange profile. Do the things what michal have told and also check your mapping program whether working fine or not in SXI_MAPPING transaction.
You can see this weblog for reference:
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
---Satish -
Regarding Java mapping and ABAP Mapping
Hello,
If I suppose to do Java mapping or ABAP mapping, Is there any pre requisite to perform these two mappings?
If exist what they are?
How to perform them?
Thank youHello jyotsna,
Java mapping can be used when you have complex mapping structures.
We can do most of the times for our requirements through Graphical mapping.
When the structures are very complex to build you can go for SAX (Simple API for XML) or DOM (Document Object Model) parsers.
Message mapping internally generates DOM parser.
Java Mapping in XI
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=java+mapping&adv=false&sortby=cm_rnd_rankvalue#
SAP Network Blog: Implementing a Java Mapping in SAP PI
/people/carlosivan.prietorubio/blog/2007/12/21/implementing-a-java-mapping-in-sap-pi
Java Mapping (SAP Library - Partner Connectivity Kit)
http://help.sap.com/saphelp_nw04/helpdata/en/e2/e13fcd80fe47768df001a558ed10b6/frameset.htm
SAP Network Blog: XI Java Mapping Helper (DOM)
/people/alessandro.guarneri/blog/2007/03/25/xi-java-mapping-helper-dom
SAP Network Blog: Testing and Debugging Java Mapping
/people/stefan.grube/blog/2006/10/23/testing-and-debugging-java-mapping-in-developer-studio
Binary Conversion in XI - Java Mapping - Code Gallery - Wiki
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/snippets/binary%2bconversion%2bin%2bxi%2b-%2bjava%2bmapping
SAP Network Blog: "JAVA MAPPING", an alternate way of reading a CSV file
/people/rahul.nawale2/blog/2006/07/18/java-mapping-an-alternate-way-of-reading-a-csv-file
ABAP mappings run on ABAP Stack and are developed in the ABAP workbench of the Integration Server.
You normally do not need to use the ABAP mappings and is preferable for someone with ABAP programming background. I should say JAVA functions would suffice any complex scenarios.
refer step by step guides for ABAP Mapping
ABAP Mapping
https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_all&query=abap+mapping&adv=false&sortby=cm_rnd_rankvalue#
How to Use ABAP Mapping in Exchange Infrastructure 3.0 (NW2004)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/5c46ab90-0201-0010-42bd-9d0302591383
SAP Network Blog: Testing ABAP Mapping
/people/sameer.shadab/blog/2005/09/29/testing-abap-mapping
SAP Network Blog: How to call XI ABAP Mapping via RFC
/people/ricardoandres.maienza/blog/2007/04/06/how-to-call-xi-abap-mapping-via-rfc
SAP Network Blog: XI: ABAP mapping logs - more standard = better visibility
/people/michal.krawczyk2/blog/2006/09/20/xi-abap-mapping-logs--more-standard-better-visibility
SAP Network Blog: Dynamically sending a mail to the PO creator using XSLT- ABAP Mapping
/people/rahul.nawale2/blog/2006/11/01/dynamically-sending-a-mail-to-the-po-creator-using-xslt-abap-mapping
You need to provide the name of your mapping program maually , you see it is an input box.
just provide the name of abap mapping program it will work.
and one more thing you cannot test abap mapping program in integration builer you need to test in abap only.
use tcode: SXI_MAPPING_TEST for testing abap mapping
Thanks,
Satya
Reward points if it is useful.. -
Receiver determintation using Abap Mapping
Hi,
I configured a scenario in which I'm using extended receiver determination to determine the receiver of an incoming message. (The reason for this is that there is only one XI system and two ECC systems - DEV and QAS. By means of the setting in a customizing table it can be determined whether the message is sent to DEV or QAS. The message can't be sent to both systems because it is a synchronous interface). The receiver determination calls an Interface Mapping which has target interface Receiver Determination. I made an Abap Mapping program in which the customize table is read and the output message is formed as follows (according to the structure of the Receivers message):
lrf_output_document = lrf_ixml_factory->create_document( ).
lrf_receivers = lrf_output_document->create_simple_element( name = 'Receivers'
parent = lrf_output_document ).
lrf_receiver = lrf_output_document->create_simple_element( name = 'Receiver'
parent = lrf_receivers ).
lrf_element = lrf_output_document->create_simple_element( name = 'Party'
value = ' '
parent = lrf_receiver ).
lrf_element->set_attribute( name = 'agency'
value = ' ' ).
lrf_element->set_attribute( name = 'scheme'
value = ' ' ).
lrf_element = lrf_output_document->create_simple_element( name = 'Service'
value = 'DEV'
parent = lrf_receiver ).
To fill the RESULT field a stream factory is instantiated and a XSTRING is created. When I send a message to the system, the receiver determination dumps: Error when parsing receiver listLength of XML document 129 Error when parsing receiver listLength of XML Document 129 System expected the element 'Receivers'
Looks like the XSTRING has not got the right structure and can not be parsed into the Receivers message. However, when I create a CSTRING, the message looks OK. I also changed the encoding (Codepage 4103).
When I replace the Abap mapping with a message mapping, the receiver determination works OK. However, in that case it is not possible to read the customizing table. I really need the Abap mapping.
Has anyone ever filled the Receivers massage by means of Abap mapping. Any feedback will be appreciated!Hi,
there is a easier way - totally based on my blogs
create an abap mapping that will feed the dynamicconfiguration in ABAP (with z "Z" namespace) - similar thing shown in my blog
/people/michal.krawczyk2/blog/2007/04/26/xipi-throwing-generic-exceptions-from-any-type-of-mapping
and you don't need to create the XML in ABAP mapping just parse it, fill DC and send the same source to the target
(so you don't change the XML)
then add a message mapping to your interface mapping in which you will only use dynamicconfig value
to populate the receiver segment
nice and clean way
Regards,
Michal Krawczyk -
When do we go for ABAP mapping and Java mapping
Hi friends,
At present I am working on graphical mapping in XI ,can you guys give me with an example or scenario when do we use ABAP mapping , Java mapping or XSLT mapping.
Thanks in advance
Sud<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/forums">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/forums</a>
I have standard XSLT mapping programs available for my scenarios, so use XSLT mapping. Similarly with Java mapping, For most scenarios, message mapping does the job too well. Abap mapping similarly is used to leverge existing ABAP base. If message mapping becomes confusing and hard to follow with too many functions, I go for Java mapping (just my way). I havent used ABAP mapping thus far.
Discussing ABAP mapping
ABAP mapping is developed in ABAP work bench. ABAP mapping needs to be transported to integration server and XI does not support this transport and have to do with ABAP transports.
Customers who can develop mapping program on SAP web AS and can transport them there can use ABAP mapping
*ABAP mapping programs cannot access the value table
*Since ABAP mappings are executed on ABAP stack SAP does not provide any ABAP mapping programs
*ABAP mapping programs must exists with one single version in IS, unlike JAva and XSLT mapping that can have multiple versions of mapping program
Regards,
Priya
priya k
null -
Hi all,
i am testing ABAP mapping using SXI_MAPPING_TEST.
i am copying my payload in the XML editor and i am using service, namespace and interface name for both sender and receiver sides.
but my Q is system does not stop in my ABAP mapping program to check step by step.
plz help me it is urgent
points should be rewareded.
regards
sreeniHi all,
After giving the XML input data in the editor and executed but it not at all showing or triggering any code which is there in ABAP Mapping Program.
I have also kept Break Point one ABAP statement like WHILE (it ther in My program), but it does stop at WHILE.
plz help me
Points will be rewareded.
regards
sreeni -
I need to split messages depending upon the message area.I have already created ABAP mapping class that creates one big file in the output.However now I need to split the messages into different files according to Business Area.
Is it possible that I can I use this methods below inside the loop and endloop statements when I build the XML document using XML DOM Processor.
renderer = o_ixml->create_renderer( ostream = o_istream
document = o_document ).
irc = renderer->render( ).
Let me know this will work ,if not how to do multi mapping with this already built ABAP Mapping Class in the Interface mapping.Any other suggestions will be highly appreciated.Hi Vijay,
We are able to output the XML properly with Messages/Message1 tags etc in ABAP mapping program. used SXI_MAPPING_TEST to make sure no errors.
In interface mapping, I had changed target interface to "0 to unbounded", also selected "enhanced" in Interface determination, activated the changes.
Now, scenrio fails with "uncaught exception in ABAP mapping".
We are pretty close to solution I guess. please help. -
Cyrillic characters issue in ABAP mapping
Hello Experts,
I am using ABAP mapping program to convert IDOC XML to flat file. Further i am using FIle adapter to write this file on FTP server.
My problem is:
When Idoc contains CYRILLIC characters in payload, then these characters appear as "#" after the mapping has executed.
If I check in SXMB_MONI in XI, the inbound payload displays data correctly. In "Request Message mapping" node, if I check the output of ABAP mapping program, then cyrillic characters are replaced with "#". The same "#" is then written to File.
Do you have any idea, how do i deal with this problem.
NOTE: I tried passing encoding type = UTF-8 to the function - SCMS_STRING_TO_XSTRING which is used the mapping program to set the encoding type, but it did not work.@PI Expert: I tried to debug the ABAP mapping using SXI_MAPPING_TEST transaction, however when I paste my payload in the editor, the cyrillic characters appear as junk characters. Due to this, in the output, these junk characters are appear as "#"
@Sarvesh: I too initially thought that this could be problem with AL11, that it is not displaying the data correctly. However when I checked the "Request Message Mapping" node in SXMB_MONI, it showed "#" characters. Also the .csv file generated contains "#" only.
Thanks for your time and response. -
Webservice to Idoc/File using ABAP mapping
Hi Experts,
I need your expert advise on below scenario.The flow of the scenario is..
1)I will get a control record from a webservice(SOAP sender adpater), this initiates the process flow.
2)based on control record ,The ABAP mapping program will call a program(within the PI sys) to fetch the data from DB table.then the ABAP mapping program will have to create 2 messages for the target. One is IDoc and another one is File.
Pls suggest the best approach.
Regards,
SriniHi Prateek,
Thanks for quick reply.
there is a main program which has different classes and methoda to fetch the data from DB tables.I dont want to touch this main program.
what i am going to do is, I will this main program from abap mapping by passing the control record information.based on this control record,the main program will fetch data for ABAP mapping.From ABAP mapping, i have to generate 2 messages,one for IDOc and another one is for File.
Hope you got my requirement.
Regards,
Srini -
Hi,
how can I debug an abap-mapping?
I cannot take the test-tool of Michal Krawczyk or SXMB_MAPPING_TEST, because I need the original payload of the mail-sender (with dynamic configurations and all payload-attachments).
I have to debug it realy inside the intergration engine.
... but how can I set breakpoints to debug the mapping session?
thanx a lot!
regards
Wolfgang HummelIn your SE80 settings you can define for which user you want to activate the external break point. maybe you will temporarily have to change the user type form service to dialog.
if you are unsure about the user you can find out the user in your abap mapping program by reading sy-uname and then throw a type X message with userid as message parameter.
Regards,
Volker
Maybe you are looking for
-
I would like build an app with a header and footer which will be used. What is the best practice for this type of layout? Any template I can use? Thanks.
-
In Design CS6 Quit Unexpectedly and will not start back up, even after restarting computer. Tried to do a CS6 re-install. It finished and said ready to use, but still getting same Unexpected Quit and In Design will not work. Did not "Un-install CS6
-
How to restart the Servlet Engine?
Hi I am configurating a WebDAV repository in KM I am required to restart the Servlet Engine. Can anyone please explain me how to restart the servlet engine. Thanks in advance -madhu
-
Get Message ID and namespace from ABAP Mapping
Hi XI Expert, Please advise how to get the message ID and namespace from ABAP Mapping. Thank You and best Regards Fernand
-
Just that. Firefox comes to front of desktop, but neither new tab nor the link open. This has always worked just fine, before this update today. I am on a Mac running 10.6.8. Thank you for your help!