Abap monitoring shows only errors

I'm working with a new installed PI 7.1 and my first PI scenario was a test of a SOAP to RFC scenario. I defined a WSDL and use a client to generate a request and send it.
My problem was that the Abap monitoring (sxmb_moni) didn't show me any messages sent. Then I set loggin parameter true because my scenario uses synchronous communication, and I rememberd to read that in order to make synchronous messages persistent loggin has to be se to true. I can see messages now, but only when they are cancelled due to an error. The successful ones just aren't showed (I'm not using any filter other than the time). However I can see them in the RWB monitoring.
Is there anything wrong? Should I make any other administration task? I've worked with 7.0 with the same type of scenarios and I had not this problem.
Thanks in advance.

Hi Eduardo,
I am not sure if I got your right - you have synch communication and are able to see entries in RWB monitoring, but by clicking on single mess you don't see the audit log. Only the log for erroneous messages is available.
In difference to older versions AF Messaging System on PI 7.1 does not persist the audit log for successfully processed messages. Pls refer to the following blog:
http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3417300)ID0083704650DB01088415040135137719End?blog=/pub/wlg/13456
BR
Rudolf

Similar Messages

  • Thinkpad USB Port Replicator with Digital Video - extended monitor shows only mouse icon

    Hi,
    I have been using my Thinkpad USB Port Replicator with Digital Video for quite a long time with my previous employer laptop. I recently switched job and got a new laptop (Dell XPS 3, Win 8.1). While installing/paring this laptop with the port replicator, I had some issues e.g. extended monitor not getting identified etc. I updated the drivers and now I am able to identify the extended monitor. But the extended monitor shows only the mouse icon and nothing else. I have upto date Intel HD graphics drivers installed in the laptop. Intel's Graphics control panel doesn't show the extend option for the USB monitor, but able to still move the mouce icon to the extended monitor.
    Any help/pointers to fix this issue is highly appreciated.

    I have the exact same problem on my W510. Everything but the screen Works. I cannot however do duplicate screens. That would help a Little bit, so I could use the big monitor instead of just the laptop.
    Please fix this Lenovo!

  • External Monitor Shows Only Black Screen ??

    Recently, my PowerBook G4 12" stopped working properly with my external monitor. My external monitor is a Dell 2005FPW that is connected to my laptop via a mini-DVI adapter, a VGA cable to the VGA port on the 2005FPW. When connected to the laptop, the 2005FPW goes black; otherwise, the monitor shows it's "rest" screen which is a bouncing color bar.
    This system has worked without problems for years. I changed nothing in the configuration and (possible red herring) the only "event" prior to the problem developing was that I installed the "Security Update 2008-005 (PowerPC) v 1.0".
    I have confirmed that the monitor and VGA cable are working with my wife's laptop.
    Today, I replaced the mini-DVI to VGA adapter, and the problem hasn't gone away.
    Any suggestions?
    Michael

    Did it develop around the same time, after you downloaded the security update?

  • I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror to an AppleTV.  The devices will connect, but the video monitors show only a blank screen.  The AppleTV's work fine with various other iOS & OSX devices. Ideas?

    I have three AppleTV's where I work.  I have two at home.  I have an iPhone 4S running iOS7.0.2 which mirrors smoothly via AirPlay.  I have a 2011 MacBook Pro and a 2011 iMac, both running Mountain Lion, both of which mirror smoothly through AirPlay.  I have a 3rd generation iPad running iOS7.0.2, and since updating to iOS7, it will not mirror.  The iPad will connect to the AppleTV, but the TV's and projectors only show a black screen when connected: the iPad screen looks as it should, except that the transitions become jumpy when connected via AirPlay.  This is true on both networks: at home and at work.  Another gentleman using the network where I work has the most recent iPad, also running iOS7.0.2, and he is having the same problem.  I have tried to "Reset All Settings."  I have tried to "Restore."  Does anyone have any suggestions?  Has anyone else experience difficulty mirroring the iPad through AirPlay since the release of iOS7.0.2?

    No problems exists with the router (on either network described above) or the multiple AppleTV's which are able to mirror multiple other OSX & iOS devices seamlessly. The problem is strictly with the iPad and iOS7.
    The following information was helpful:
    Big Apple fan
    Re: AirPlay with AirServer connectivity problem
    Oct 14, 2013 9:43 AM (in response to ceb2652)
    This is an iOS 7 AirPlay mirroring bug...
    To make matters worse, the iPad automatically drops its mirroring session 45 seconds after it auto-locks.
    3-4 mirroring sessions is all it takes for the iPad mirroring to freeze up.
    After this happens, mirroring to an Apple TV only projects a blank screen.
    Once the mirroring is hung, the only way to fix it is to restart the iPad.
    Apple please fix this iOS 7 issue!

  • Can't detect external monitor, shows only 640x480

    Hi,
    I'm using a Macbook Pro Unibody 13" 2.53GHz to connect to a Dell 2408WFP external monitor. It worked FLAWLESSLY with my old Macbook Pro using a DVI cable.
    1) I first bought the infamous mini-Displayport to DVI adaptor. It didn't work (red static etc. check the page of this product on Apple's store website : you'll see it's a known issue). Cost me 35$
    2) I then bought a mini-Displayport to Displayport cable. Thought it should work perfectly. It DOES NOT. The Macbook is apparently UNABLE TO DETECT my Dell and gives it a default resolution of 640x480. Which is ridiculous knowing that the Dell 2408WFP is capable of displaying 1900x1200.
    It's really a pain. Does anyone know about this problem or have an idea how to solve it?
    Thanks,
    P.

    Ok,
    It was neither the cable nor the computer (thanks Apple). It was the monitor's EDID profile. Dell's problem.
    There's two ways to fix this. 1) It is possible (I did it) to create a custom profile using SwitchResX. You'll need to hook up your computer to the monitor using a working connexion (I used DVI) and then use the "export" function in SwitchResX. It will give you a text file. In it you'll have enough data to fill SwitchResX' form to setup a custom profile. You'll then need to restart the computer, hook it with the Displayport cable and try to use this custom EDID profile. It worked for me.
    For example (and hoping it will help others) here are the data you need to setup a custom profile for the Dell 2408WFP :
    Descriptor #0 - Timing definition:
    Mode = 1920 x 1200 @ 59,950Hz
    Pixel Clock............. 154,00 MHz Non-Interlaced
    Horizontal Vertical
    Active.................. 1920 pixels 1200 lines
    Front Porch............. 48 pixels 3 lines
    Sync Width.............. 32 pixels 6 lines
    Back Porch.............. 80 pixels 26 lines
    Blanking................ 160 pixels 35 lines
    Total................... 2080 pixels 1235 lines
    Scan Rate............... 74,038 kHz 59,950 Hz
    Image Size.............. 519 mm 324 mm
    Border.................. 0 pixels 0 lines
    Sync: Digital separate with
    * Negative vertical polarity
    * Positive horizontal polarity
    2) Of course, you can call Dell and tell them about it. They are sending me a THIRD replacement monitor for this. Be prepared when you call them : I spoke with two representative (and among them a "senior technician") who DIDN'T know what was a Displayport. They even tried to sell me the idea that 640x480 is the native resolution for Displayport. It was hilarious. Really. I got them to look it up on Wikipedia.
    Case solved. Apple 1 - Dell 0.
    P.

  • Premiere Pro CC - Program Monitor shows only black screen

    Hi All,
    I am hoping someone out there can help me (and I am sure many others) with this problem.
    I was using Premiere Pro CS6 and was half way through a project when I upgraded to Premiere Pro CC. This was fine and I finished the project, however soon after this when I re-entered Premiere Pro CC in order to make some final adjustments and tweaks, the program monitor appeared to be black. I can see nothing but black on the program monitor window. When I play the project, the sound works just fine, but I cannot see anything in the program monitor.
    Please see the discussion linked here (http://forums.adobe.com/message/5487954) for more information on this issue. I am hoping to relight the fire on this and get some answers for everyone having this issue. It has rendered my Permiere Pro useless right now. I cannot even start new projects as it has the same problem.
    NOTE: I have tried rolling back to CS6 but this does not work and I found out from this forum that rolling back versions was never possible. I have also tried reinstalling PP CC but that also did not solve the problem.
    I hope someone can help out here.
    Thank you!

    Hi Kevin,
    I am up to date on all Adobe Applications according to the Creative Cloud Manager.  However when  I check the "About" section of my installation of Premiere Pro, it says v7.0, not 7.0.1...
    I am on a Windows 7 machine 64 bit.
    I did a full udate of all Adobe updates today and restarted my system, but still when I open my project, the program monitor is black.
    Any help is appreciated.
    Thanks again,
    John

  • Dual monitor problem (2nd screen black, shows only "_")

    Hi, im trying to configure dual screen, tested lot of configs but stuck with this problem: second monitor shows only "_" in top-left corrnerm.
    My current Xorg is:
    Section "Monitor"
    Identifier "LewyMonitor"
    Option "DPMS"
    Option "Enable" "true"
    EndSection
    Section "Monitor"
    Identifier "PrawyMonitor"
    Option "DPMS"
    Option "Enable" "true"
    EndSection
    Section "Device"
    Identifier "LewaKarta"
    BusID "PCI:0:9:0"
    Driver "mach64"
    Screen 0
    EndSection
    Section "Device"
    Identifier "PrawaKarta"
    BusID "PCI:1:0:0"
    Screen 1
    EndSection
    Section "Screen"
    Identifier "LewyEkran"
    Device "LewaKarta"
    Monitor "LewyMonitor"
    DefaultDepth 15
    EndSection
    Section "Screen"
    Identifier "PrawyEkran"
    Device "PrawaKarta"
    Monitor "PrawyMonitor"
    DefaultDepth 24
    EndSection
    Section "DRI"
    Mode 0666
    EndSection
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "LewyEkran" 0 0
    Screen 1 "PrawyEkran" RightOf "LewyEkran"
    EndSection
    Im using:
    00:09.0 VGA compatible controller: ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] (rev 9a)
    01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1)
    Xorg.0.log:
    [ 2445.373]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 2445.373]
    X.Org X Server 1.8.1.902 (1.8.2 RC 2)
    Release Date: 2010-06-21
    [ 2445.373] X Protocol Version 11, Revision 0
    [ 2445.373] Build Operating System: Linux 2.6.34-ARCH i686
    [ 2445.373] Current Operating System: Linux myhost 2.6.34-ARCH #1 SMP PREEMPT Tue Aug 10 21:38:22 CEST 2010 i686
    [ 2445.374] Kernel command line: root=/dev/disk/by-uuid/cd43eabd-ff42-4d85-be67-b98bd0d6e27e ro
    [ 2445.374] Build Date: 21 June 2010 11:54:27AM
    [ 2445.374]
    [ 2445.374] Current version of pixman: 0.18.2
    [ 2445.374] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2445.374] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2445.374] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 27 04:01:41 2003
    [ 2445.374] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2445.374] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 2445.375] (==) ServerLayout "X.org Configured"
    [ 2445.375] (**) |-->Screen "LewyEkran" (0)
    [ 2445.375] (**) | |-->Monitor "LewyMonitor"
    [ 2445.376] (**) | |-->Device "LewaKarta"
    [ 2445.376] (**) |-->Screen "PrawyEkran" (1)
    [ 2445.376] (**) | |-->Monitor "PrawyMonitor"
    [ 2445.376] (**) | |-->Device "PrawaKarta"
    [ 2445.398] (==) Automatically adding devices
    [ 2445.398] (==) Automatically enabling devices
    [ 2445.398] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2445.398] Entry deleted from font path.
    [ 2445.398] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 2445.398] Entry deleted from font path.
    [ 2445.398] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 2445.398] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2445.398] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 2445.398] (II) Loader magic: 0x81e9d00
    [ 2445.398] (II) Module ABI versions:
    [ 2445.398] X.Org ANSI C Emulation: 0.4
    [ 2445.398] X.Org Video Driver: 7.0
    [ 2445.399] X.Org XInput driver : 9.0
    [ 2445.399] X.Org Server Extension : 3.0
    [ 2445.419] (--) PCI: (0:0:9:0) 1002:4755:1002:4755 ATI Technologies Inc 3D Rage II+ 215GTB [Mach64 GTB] rev 154, Mem @ 0xcc000000/16777216, 0xcfffd000/4096, I/O @ 0x0000d800/256, BIOS @ 0x????????/131072
    [ 2445.437] (--) PCI:*(0:1:0:0) 10de:0110:0000:0000 nVidia Corporation NV11 [GeForce2 MX/MX 400] rev 161, Mem @ 0xce000000/16777216, 0xc0000000/134217728, BIOS @ 0x????????/65536
    [ 2445.437] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 2445.437] (II) LoadModule: "extmod"
    [ 2445.438] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 2445.438] (II) Module extmod: vendor="X.Org Foundation"
    [ 2445.438] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.438] Module class: X.Org Server Extension
    [ 2445.438] ABI class: X.Org Server Extension, version 3.0
    [ 2445.438] (II) Loading extension MIT-SCREEN-SAVER
    [ 2445.438] (II) Loading extension XFree86-VidModeExtension
    [ 2445.438] (II) Loading extension XFree86-DGA
    [ 2445.438] (II) Loading extension DPMS
    [ 2445.438] (II) Loading extension XVideo
    [ 2445.438] (II) Loading extension XVideo-MotionCompensation
    [ 2445.438] (II) Loading extension X-Resource
    [ 2445.439] (II) LoadModule: "dbe"
    [ 2445.439] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 2445.439] (II) Module dbe: vendor="X.Org Foundation"
    [ 2445.439] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.439] Module class: X.Org Server Extension
    [ 2445.439] ABI class: X.Org Server Extension, version 3.0
    [ 2445.439] (II) Loading extension DOUBLE-BUFFER
    [ 2445.439] (II) LoadModule: "glx"
    [ 2445.439] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2445.440] (II) Module glx: vendor="X.Org Foundation"
    [ 2445.440] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.440] ABI class: X.Org Server Extension, version 3.0
    [ 2445.440] (==) AIGLX enabled
    [ 2445.440] (II) Loading extension GLX
    [ 2445.440] (II) LoadModule: "record"
    [ 2445.440] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 2445.440] (II) Module record: vendor="X.Org Foundation"
    [ 2445.440] compiled for 1.8.1.902, module version = 1.13.0
    [ 2445.441] Module class: X.Org Server Extension
    [ 2445.441] ABI class: X.Org Server Extension, version 3.0
    [ 2445.441] (II) Loading extension RECORD
    [ 2445.441] (II) LoadModule: "dri"
    [ 2445.441] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 2445.441] (II) Module dri: vendor="X.Org Foundation"
    [ 2445.441] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.441] ABI class: X.Org Server Extension, version 3.0
    [ 2445.441] (II) Loading extension XFree86-DRI
    [ 2445.441] (II) LoadModule: "dri2"
    [ 2445.442] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 2445.442] (II) Module dri2: vendor="X.Org Foundation"
    [ 2445.442] compiled for 1.8.1.902, module version = 1.2.0
    [ 2445.442] ABI class: X.Org Server Extension, version 3.0
    [ 2445.442] (II) Loading extension DRI2
    [ 2445.442] (II) LoadModule: "mach64"
    [ 2445.443] (II) Loading /usr/lib/xorg/modules/drivers/mach64_drv.so
    [ 2445.443] (II) Module mach64: vendor="X.Org Foundation"
    [ 2445.443] compiled for 1.8.0, module version = 6.8.2
    [ 2445.443] Module class: X.Org Video Driver
    [ 2445.443] ABI class: X.Org Video Driver, version 7.0
    [ 2445.443] (II) MACH64: Driver for ATI Mach64 chipsets
    [ 2445.443] (++) using VT number 8
    [ 2445.448] (II) Primary Device is: PCI 01@00:00:0
    [ 2445.449] (II) MACH64(0): Creating default Display subsection in Screen section
    "LewyEkran" for depth/fbbpp 15/16
    [ 2445.449] (**) MACH64(0): Depth 15, (--) framebuffer bpp 16
    [ 2445.449] (==) MACH64(0): Using XAA acceleration architecture
    [ 2445.450] (II) MACH64: Mach64 in slot 0:9:0 detected.
    [ 2445.450] (II) Loading sub module "int10"
    [ 2445.450] (II) LoadModule: "int10"
    [ 2445.450] (II) Loading /usr/lib/xorg/modules/libint10.so
    [ 2445.450] (II) Module int10: vendor="X.Org Foundation"
    [ 2445.451] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.451] ABI class: X.Org Video Driver, version 7.0
    [ 2445.580] (II) Loading sub module "ddc"
    [ 2445.581] (II) LoadModule: "ddc"
    [ 2445.581] (II) Module "ddc" already built-in
    [ 2445.581] (II) Loading sub module "vbe"
    [ 2445.581] (II) LoadModule: "vbe"
    [ 2445.581] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [ 2445.581] (II) Module vbe: vendor="X.Org Foundation"
    [ 2445.581] compiled for 1.8.1.902, module version = 1.1.0
    [ 2445.581] ABI class: X.Org Video Driver, version 7.0
    [ 2445.582] (II) MACH64(0): VESA BIOS detected
    [ 2445.582] (II) MACH64(0): VESA VBE Version 2.0
    [ 2445.582] (II) MACH64(0): VESA VBE Total Mem: 1024 kB
    [ 2445.582] (II) MACH64(0): VESA VBE OEM: ATI MACH64
    [ 2445.582] (II) MACH64(0): VESA VBE OEM Software Rev: 1.0
    [ 2445.582] (II) MACH64(0): VESA VBE OEM Vendor: ATI Technologies Inc.
    [ 2445.582] (II) MACH64(0): VESA VBE OEM Product: MACH64GT
    [ 2445.582] (II) MACH64(0): VESA VBE OEM Product Rev: 01.00
    [ 2445.583] (II) MACH64(0): VESA VBE DDC supported
    [ 2445.583] (II) MACH64(0): VESA VBE DDC Level 2
    [ 2445.583] (II) MACH64(0): VESA VBE DDC transfer in appr. 2 sec.
    [ 2445.632] (II) MACH64(0): VESA VBE DDC read successfully
    [ 2445.632] (II) MACH64(0): Manufacturer: GSM Model: 4ae0 Serial#: 12170
    [ 2445.632] (II) MACH64(0): Year: 2006 Week: 12
    [ 2445.632] (II) MACH64(0): EDID Version: 1.3
    [ 2445.632] (II) MACH64(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
    [ 2445.632] (II) MACH64(0): Sync: Separate SyncOnGreen
    [ 2445.632] (II) MACH64(0): Max Image Size [cm]: horiz.: 38 vert.: 30
    [ 2445.632] (II) MACH64(0): Gamma: 2.20
    [ 2445.632] (II) MACH64(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    [ 2445.632] (II) MACH64(0): First detailed timing is preferred mode
    [ 2445.632] (II) MACH64(0): redX: 0.647 redY: 0.346 greenX: 0.292 greenY: 0.602
    [ 2445.633] (II) MACH64(0): blueX: 0.149 blueY: 0.130 whiteX: 0.313 whiteY: 0.328
    [ 2445.633] (II) MACH64(0): Supported established timings:
    [ 2445.633] (II) MACH64(0): 720x400@70Hz
    [ 2445.633] (II) MACH64(0): 640x480@60Hz
    [ 2445.633] (II) MACH64(0): 640x480@75Hz
    [ 2445.633] (II) MACH64(0): 800x600@60Hz
    [ 2445.633] (II) MACH64(0): 800x600@75Hz
    [ 2445.633] (II) MACH64(0): 832x624@75Hz
    [ 2445.633] (II) MACH64(0): 1024x768@60Hz
    [ 2445.633] (II) MACH64(0): 1024x768@75Hz
    [ 2445.633] (II) MACH64(0): 1280x1024@75Hz
    [ 2445.633] (II) MACH64(0): 1152x864@75Hz
    [ 2445.633] (II) MACH64(0): Manufacturer's mask: 0
    [ 2445.633] (II) MACH64(0): Supported standard timings:
    [ 2445.633] (II) MACH64(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
    [ 2445.633] (II) MACH64(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293
    [ 2445.633] (II) MACH64(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321
    [ 2445.633] (II) MACH64(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 2445.633] (II) MACH64(0): Supported detailed timing:
    [ 2445.633] (II) MACH64(0): clock: 108.0 MHz Image Size: 376 x 301 mm
    [ 2445.633] (II) MACH64(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
    [ 2445.633] (II) MACH64(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
    [ 2445.633] (II) MACH64(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 83 kHz, PixClock max 140 MHz
    [ 2445.634] (II) MACH64(0): Monitor name: L1952S
    [ 2445.634] (II) MACH64(0): Monitor name:
    [ 2445.634] (II) MACH64(0): EDID (in hex):
    [ 2445.634] (II) MACH64(0): 00ffffffffffff001e6de04a8a2f0000
    [ 2445.634] (II) MACH64(0): 0c1001036a261e78eaec54a5584a9a26
    [ 2445.634] (II) MACH64(0): 215054a56b80314f454f614f81800101
    [ 2445.634] (II) MACH64(0): 010101010101302a009851002a403070
    [ 2445.634] (II) MACH64(0): 1300782d1100001e000000fd00384b1e
    [ 2445.634] (II) MACH64(0): 530e000a202020202020000000fc004c
    [ 2445.634] (II) MACH64(0): 31393532530a202020202020000000fc
    [ 2445.634] (II) MACH64(0): 000a2020202020202020202020200046
    [ 2445.634] (II) MACH64(0): EDID vendor "GSM", prod id 19168
    [ 2445.634] (II) MACH64(0): Using EDID range info for horizontal sync
    [ 2445.634] (II) MACH64(0): Using EDID range info for vertical refresh
    [ 2445.634] (II) MACH64(0): Printing DDC gathered Modelines:
    [ 2445.634] (II) MACH64(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 2445.634] (II) MACH64(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 2445.635] (II) MACH64(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 2445.635] (II) MACH64(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 2445.635] (II) MACH64(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 2445.635] (II) MACH64(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 2445.635] (II) MACH64(0): BIOS Data: BIOSSize=0x8000, ROMTable=0x00FC.
    [ 2445.635] (II) MACH64(0): BIOS Data: ClockTable=0x06AE, FrequencyTable=0x0000.
    [ 2445.635] (II) MACH64(0): BIOS Data: LCDTable=0x0000.
    [ 2445.635] (II) MACH64(0): BIOS Data: VideoTable=0x0000, HardwareTable=0x0000.
    [ 2445.635] (II) MACH64(0): BIOS Data: I2CType=0x00, Tuner=0x00, Decoder=0x00, Audio=0x0F.
    [ 2445.635] (--) MACH64(0): ATI 3D Rage II+DVD graphics controller detected.
    [ 2445.635] (--) MACH64(0): Chip type 4755 "GU", version 2, foundry UMC, class 0, revision 0x02.
    [ 2445.635] (--) MACH64(0): PCI bus interface detected; block I/O base is 0xD800.
    [ 2445.635] (--) MACH64(0): ATI Mach64 adapter detected.
    [ 2445.636] (!!) MACH64(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net.
    [ 2445.636] (--) MACH64(0): Internal RAMDAC (subtype 1) detected.
    [ 2445.636] (==) MACH64(0): RGB weight 555
    [ 2445.636] (==) MACH64(0): Default visual is TrueColor
    [ 2445.636] (==) MACH64(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 2445.636] (II) MACH64(0): Using Mach64 accelerator CRTC.
    [ 2445.636] (II) MACH64(0): Storing hardware cursor image at 0xCC0FFC00.
    [ 2445.636] (II) MACH64(0): Using 8 MB linear aperture at 0xCC000000.
    [ 2445.636] (!!) MACH64(0): Virtual resolutions will be limited to 1023 kB
    due to linear aperture size and/or placement of hardware cursor image area.
    [ 2445.636] (II) MACH64(0): Using Block 0 MMIO aperture at 0xCFFFD400.
    [ 2445.636] (II) MACH64(0): Using Block 1 MMIO aperture at 0xCFFFD000.
    [ 2445.637] (II) MACH64(0): MMIO write caching enabled.
    [ 2445.637] (--) MACH64(0): 1024 kB of Pseudo-EDO DRAM detected (using 1023 kB).
    [ 2445.637] (WW) MACH64(0): Cannot shadow an accelerated frame buffer.
    [ 2445.637] (II) MACH64(0): Engine XCLK 59.876 MHz; Refresh rate code 3.
    [ 2445.637] (--) MACH64(0): Internal programmable clock generator detected.
    [ 2445.637] (--) MACH64(0): Reference clock 157.5/11 (14.318) MHz.
    [ 2445.637] (II) MACH64(0): LewyMonitor: Using hsync range of 30.00-83.00 kHz
    [ 2445.637] (II) MACH64(0): LewyMonitor: Using vrefresh range of 56.00-75.00 Hz
    [ 2445.637] (II) MACH64(0): LewyMonitor: Using maximum pixel clock of 140.00 MHz
    [ 2445.637] (II) MACH64(0): Estimated virtual size for aspect ratio 1.2667 is 1280x1024
    [ 2445.637] (II) MACH64(0): Maximum clock: 200.00 MHz
    [ 2445.637] (II) MACH64(0): Not using default mode "640x350" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "320x175" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "640x400" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "320x200" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "720x400" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "360x200" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "640x480" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "320x240" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "800x600" (vrefresh out of range)
    [ 2445.637] (II) MACH64(0): Not using default mode "400x300" (vrefresh out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1024x768i" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "512x384i" (vrefresh out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "512x384" (vrefresh out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1152x864" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1280x960" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1280x960" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "640x480" (hsync out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1280x1024" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1280x1024" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1280x1024" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "640x512" (hsync out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1600x1200" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1600x1200" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1600x1200" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "800x600" (hsync out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1600x1200" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "800x600" (hsync out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1600x1200" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "800x600" (hsync out of range)
    [ 2445.638] (II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "896x672" (insufficient memory for mode)
    [ 2445.638] (II) MACH64(0): Not using default mode "1792x1344" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "896x672" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "928x696" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1856x1392" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "928x696" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "960x720" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "960x720" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1400x1050" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1400x1050" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1920x1440" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "960x720" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "2048x1536" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using default mode "1024x768" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using driver mode "1280x1024" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using driver mode "1280x1024" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using driver mode "1024x768" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using driver mode "1024x768" (insufficient memory for mode)
    [ 2445.639] (II) MACH64(0): Not using driver mode "1152x864" (insufficient memory for mode)
    [ 2445.640] (WW) MACH64(0): Shrinking virtual size estimate from 1280x1024 to 832x624
    [ 2445.640] (--) MACH64(0): Virtual size is 832x624 (pitch 832)
    [ 2445.640] (**) MACH64(0): *Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
    [ 2445.640] (II) MACH64(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 2445.640] (**) MACH64(0): *Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
    [ 2445.640] (II) MACH64(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 2445.640] (**) MACH64(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 2445.640] (**) MACH64(0): *Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 2445.640] (**) MACH64(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 2445.640] (**) MACH64(0): *Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 2445.640] (**) MACH64(0): *Default mode "800x600": 87.8 MHz, 81.2 kHz, 65.0 Hz (D)
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x65.0 87.75 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (81.2 kHz)
    [ 2445.640] (**) MACH64(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
    [ 2445.640] (II) MACH64(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "800x600": 81.0 MHz, 75.0 kHz, 60.0 Hz (D)
    [ 2445.641] (II) MACH64(0): Modeline "800x600"x60.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
    [ 2445.641] (II) MACH64(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "700x525": 77.9 MHz, 81.5 kHz, 74.8 Hz (D)
    [ 2445.641] (II) MACH64(0): Modeline "700x525"x74.8 77.90 700 732 892 956 525 526 532 545 doublescan +hsync +vsync (81.5 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "700x525": 61.0 MHz, 64.9 kHz, 60.0 Hz (D)
    [ 2445.641] (II) MACH64(0): Modeline "700x525"x60.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
    [ 2445.641] (II) MACH64(0): Modeline "640x512"x75.0 67.50 640 648 720 844 512 512 514 533 doublescan +hsync +vsync (80.0 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
    [ 2445.641] (II) MACH64(0): Modeline "640x512"x60.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz)
    [ 2445.641] (**) MACH64(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
    [ 2445.641] (II) MACH64(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 2445.641] (**) MACH64(0): *Driver mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
    [ 2445.641] (II) MACH64(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
    [ 2445.641] (II) MACH64(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 2445.641] (**) MACH64(0): *Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
    [ 2445.641] (II) MACH64(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "640x480"x60.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
    [ 2445.642] (II) MACH64(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 2445.642] (**) MACH64(0): *Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
    [ 2445.642] (II) MACH64(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "576x432"x75.0 54.00 576 608 672 800 432 432 434 450 doublescan +hsync +vsync (67.5 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "512x384": 39.4 MHz, 60.0 kHz, 75.0 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "512x384"x75.0 39.38 512 520 568 656 384 384 386 400 doublescan +hsync +vsync (60.0 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "512x384"x70.1 37.50 512 524 592 664 384 385 388 403 doublescan -hsync -vsync (56.5 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "512x384"x60.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "416x312"x74.7 28.64 416 432 464 576 312 312 314 333 doublescan -hsync -vsync (49.7 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "400x300"x75.1 24.75 400 408 448 528 300 300 302 312 doublescan +hsync +vsync (46.9 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
    [ 2445.642] (II) MACH64(0): Modeline "400x300"x72.2 25.00 400 428 488 520 300 318 321 333 doublescan +hsync +vsync (48.1 kHz)
    [ 2445.642] (**) MACH64(0): *Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
    [ 2445.643] (II) MACH64(0): Modeline "400x300"x60.3 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz)
    [ 2445.643] (**) MACH64(0): *Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
    [ 2445.643] (II) MACH64(0): Modeline "400x300"x56.3 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz)
    [ 2445.643] (**) MACH64(0): *Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
    [ 2445.643] (II) MACH64(0): Modeline "320x240"x75.0 15.75 320 328 360 420 240 240 242 250 doublescan -hsync -vsync (37.5 kHz)
    [ 2445.643] (**) MACH64(0): *Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
    [ 2445.643] (II) MACH64(0): Modeline "320x240"x72.8 15.75 320 332 352 416 240 244 246 260 doublescan -hsync -vsync (37.9 kHz)
    [ 2445.643] (**) MACH64(0): *Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
    [ 2445.643] (II) MACH64(0): Modeline "320x240"x60.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz)
    [ 2445.643] (**) MACH64(0): Display dimensions: (380, 300) mm
    [ 2445.643] (**) MACH64(0): DPI set to (55, 52)
    [ 2445.643] (II) Loading sub module "fb"
    [ 2445.643] (II) LoadModule: "fb"
    [ 2445.644] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 2445.644] (II) Module fb: vendor="X.Org Foundation"
    [ 2445.644] compiled for 1.8.1.902, module version = 1.0.0
    [ 2445.644] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 2445.644] (II) Loading sub module "ramdac"
    [ 2445.644] (II) LoadModule: "ramdac"
    [ 2445.645] (II) Module "ramdac" already built-in
    [ 2445.645] (II) Loading sub module "xaa"
    [ 2445.645] (II) LoadModule: "xaa"
    [ 2445.645] (II) Loading /usr/lib/xorg/modules/libxaa.so
    [ 2445.646] (II) Module xaa: vendor="X.Org Foundation"
    [ 2445.646] compiled for 1.8.1.902, module version = 1.2.1
    [ 2445.646] ABI class: X.Org Video Driver, version 7.0
    [ 2445.646] (II) Loading sub module "i2c"
    [ 2445.646] (II) LoadModule: "i2c"
    [ 2445.646] (II) Module "i2c" already built-in
    [ 2445.646] (II) MACH64(0): I2C bus "Mach64" initialized.
    [ 2445.646] (--) MACH64(0): ImpacTV chip ID 0x9A detected.
    [ 2445.656] (WW) MACH64(0): Direct rendering is not supported for ATI chips earlier than the ATI 3D Rage Pro.
    [ 2445.657] (II) MACH64(0): Largest offscreen areas (with overlaps):
    [ 2445.657] (II) MACH64(0): 832 x 5 rectangle at 0,624
    [ 2445.657] (II) MACH64(0): 448 x 6 rectangle at 0,624
    [ 2445.657] (II) MACH64(0): Using XFree86 Acceleration Architecture (XAA)
    [ 2445.657] Screen to screen bit blits
    [ 2445.657] Solid filled rectangles
    [ 2445.657] 8x8 mono pattern filled rectangles
    [ 2445.657] Indirect CPU to Screen color expansion
    [ 2445.657] Solid Lines
    [ 2445.658] Setting up tile and stipple cache:
    [ 2445.658] Not enough video memory for pixmap cache
    [ 2445.658] (==) MACH64(0): Backing store disabled
    [ 2445.658] (==) MACH64(0): Silken mouse enabled
    [ 2445.659] (**) MACH64(0): DPMS enabled
    [ 2445.659] (WW) MACH64(0): Option "Enable" is not used
    [ 2445.659] (II) MACH64(0): Direct rendering disabled
    [ 2445.659] (==) RandR enabled
    [ 2445.659] (II) Initializing built-in extension Generic Event Extension
    [ 2445.659] (II) Initializing built-in extension SHAPE
    [ 2445.659] (II) Initializing built-in extension MIT-SHM
    [ 2445.659] (II) Initializing built-in extension XInputExtension
    [ 2445.659] (II) Initializing built-in extension XTEST
    [ 2445.659] (II) Initializing built-in extension BIG-REQUESTS
    [ 2445.659] (II) Initializing built-in extension SYNC
    [ 2445.659] (II) Initializing built-in extension XKEYBOARD
    [ 2445.659] (II) Initializing built-in extension XC-MISC
    [ 2445.659] (II) Initializing built-in extension SECURITY
    [ 2445.659] (II) Initializing built-in extension XINERAMA
    [ 2445.659] (II) Initializing built-in extension XFIXES
    [ 2445.659] (II) Initializing built-in extension RENDER
    [ 2445.659] (II) Initializing built-in extension RANDR
    [ 2445.659] (II) Initializing built-in extension COMPOSITE
    [ 2445.659] (II) Initializing built-in extension DAMAGE
    [ 2445.682] (II) AIGLX: Screen 0 is not DRI2 capable
    [ 2445.682] (II) AIGLX: Screen 0 is not DRI capable
    [ 2445.687] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
    [ 2445.687] (II) GLX: Initialized DRISWRAST GL provider for screen 0
    [ 2446.130] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 2446.130] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 2446.130] (II) LoadModule: "evdev"
    [ 2446.131] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 2446.138] (II) Module evdev: vendor="X.Org Foundation"
    [ 2446.138] compiled for 1.8.0, module version = 2.4.0
    [ 2446.138] Module class: X.Org XInput Driver
    [ 2446.138] ABI class: X.Org XInput driver, version 9.0
    [ 2446.138] (**) Power Button: always reports core events
    [ 2446.138] (**) Power Button: Device: "/dev/input/event2"
    [ 2446.138] (II) Power Button: Found keys
    [ 2446.138] (II) Power Button: Configuring as keyboard
    [ 2446.138] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 2446.138] (**) Option "xkb_rules" "evdev"
    [ 2446.138] (**) Option "xkb_model" "evdev"
    [ 2446.139] (**) Option "xkb_layout" "us"
    [ 2446.233] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
    [ 2446.233] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 2446.234] (**) Sleep Button: always reports core events
    [ 2446.234] (**) Sleep Button: Device: "/dev/input/event1"
    [ 2446.234] (II) Sleep Button: Found keys
    [ 2446.234] (II) Sleep Button: Configuring as keyboard
    [ 2446.234] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 2446.234] (**) Option "xkb_rules" "evdev"
    [ 2446.234] (**) Option "xkb_model" "evdev"
    [ 2446.234] (**) Option "xkb_layout" "us"
    [ 2446.243] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 2446.243] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 2446.243] (**) AT Translated Set 2 keyboard: always reports core events
    [ 2446.243] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 2446.244] (II) AT Translated Set 2 keyboard: Found keys
    [ 2446.244] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 2446.244] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 2446.244] (**) Option "xkb_rules" "evdev"
    [ 2446.244] (**) Option "xkb_model" "evdev"
    [ 2446.244] (**) Option "xkb_layout" "us"
    [ 2446.245] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/event4)
    [ 2446.245] (**) ImExPS/2 Generic Explorer Mouse: Applying InputClass "evdev pointer catchall"
    [ 2446.245] (**) ImExPS/2 Generic Explorer Mouse: always reports core events
    [ 2446.245] (**) ImExPS/2 Generic Explorer Mouse: Device: "/dev/input/event4"
    [ 2446.245] (II) ImExPS/2 Generic Explorer Mouse: Found 9 mouse buttons
    [ 2446.245] (II) ImExPS/2 Generic Explorer Mouse: Found scroll wheel(s)
    [ 2446.245] (II) ImExPS/2 Generic Explorer Mouse: Found relative axes
    [ 2446.245] (II) ImExPS/2 Generic Explorer Mouse: Found x and y relative axes
    [ 2446.245] (II) ImExPS/2 Generic Explorer Mouse: Configuring as mouse
    [ 2446.245] (**) ImExPS/2 Generic Explorer Mouse: YAxisMapping: buttons 4 and 5
    [ 2446.245] (**) ImExPS/2 Generic Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 2446.246] (II) XINPUT: Adding extended input device "ImExPS/2 Generic Explorer Mouse" (type: MOUSE)
    [ 2446.246] (**) ImExPS/2 Generic Explorer Mouse: (accel) keeping acceleration scheme 1
    [ 2446.246] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration profile 0
    [ 2446.246] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration factor: 2.000
    [ 2446.246] (**) ImExPS/2 Generic Explorer Mouse: (accel) acceleration threshold: 4
    [ 2446.246] (II) ImExPS/2 Generic Explorer Mouse: initialized for relative axes.
    [ 2446.247] (II) config/udev: Adding input device ImExPS/2 Generic Explorer Mouse (/dev/input/mouse0)
    [ 2446.247] (II) No input driver/identifier specified (ignoring)
    [ 2446.247] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 2446.247] (II) No input driver/identifier specified (ignoring)
    The same effect with Xinerama on. Please, help me.

    hume's doona wrote:
    Are you configuring for the nvidia card?
    #sudo nvidia-settings
    and set it to twin view in the gui?
    No I think the problem is more basic than that...he's trying to use an ATi card and an Nvidia card simultaneously.  Something that I don't think will work.
    It also dependent on what drivers he is trying to use, as the (new) Nvidia proprietary driver only supports GeForce4 series chips and up...and the OP has an even older card than that.  The legacy Nvidia-96.xx driver does support his chipset, but 96.xx does not work with Xorg1.8 last I knew. see: http://www.archlinux.org/news/502/
    Twinview does not exist in the Nouveau drivers, so one has to use xrandr: http://wiki.archlinux.org/index.php/Nouveau
    Last edited by Skripka (2010-08-14 14:16:25)

  • Monitor will only show sleep mode and nothing else

    monitor showing only sleep mode and I have turned off and I have tryed to restart but no scrren  but sleep mode.

    Could be different things: Cable, video-socket in computer, or the monitor itself.
    do you have the option of trying another cable or another monitor?
    Perhaps go to a friend and see if they can help you.
    In order to determine what's the issue, you'll need to do these tests.
    Please let me know the result of these tests so I can determine the exact error.
    AlHaste - HP Notebook Technician
    Were I able to help you? Please say thanks by clicking on the purple thumbs up icon over to the left
    Did I solve your issue? If so, Please mark Accept As Solution to the right

  • Samsung SyncMaster 2243 Shows Only Black

    I've just purchased a Samsung SyncMaster 2243 monitor and changed its resolution. When rebooting my Mac the monitor shows only black with an alert exactly saying: 'Non optimum mode - Optimum mode 1920x1080 60Hz'.
    The point is that I have no chance to go and change the resolution, because the monitor won't show other than black. I tried to restart from the system DVD pressing the C key on restart but with still the same result.
    Don't really know what else to do. Can anyone eventually help me from out there?
    By the way, I must say (and this is the strange part of all) that the first three or four times I switched my Mac on, after the advice the monitor showed, I could see my desktop and operate normally.
    Thank you in advance
    Giovanni

    I would connect it to another monitor that I knew will work, once at the DT I would go to system preferences and set the display to a setting I know will work, say 1024x768, shut down my mac, connect the samsung and start. If you have a graphics card that has duel video ports and connect both up and set the video settings that way.
    Does the samsung have a menu that allows monitor settings that can be changed?

  • After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version"

    After upgrading to Yosemite (I don't have iPhoto anymore, only PHOTOS) my pictures will not import from my iPad or iPhone 5s or any picture from web, it shows "Database Error: failured to persist version".  Any help will be greatly appreciated.

    Sorry,
    Yes, the error message is exactly like that  ("Database error: failured to persist version")
    No photos will import at all.  I use USB to import from iPhone 5s or iPad 2. 
    About the difference?  iPhoto and Photos .  Are there two softwares?
    I also will like to merge and/or synchronize all my photos I had saved to iCloud backups, Macbook Pro,  iPhone 5s and iPad hard drives using iPhoto.  It's call iPhoto library.  At one point I turned off streaming. 
    Thanks again Larry HN.

  • The Apps Application of my of my Creative Cloud Desktop only shows "Download Error"

    The Apps Application of my of my Creative Cloud Desktop only shows "Download Error" and asks to either reload application (which does not work) or to contact customer support. As result I am unable to update any of my Apps even if I try and update through the website. Does anyone know how to fix this problem? I am working on a Mac with OS X 10.9.3.

    Some 10.9.3 links
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0
    or
    Link for Download & Install & Setup & Activation problems may help
    -Online Chat http://www.adobe.com/support/download-install/supportinfo/

  • External Monitor Problem-Only shows Background

    First off, I am a new mac user and just got a macbook last week. So far the only problem I have occurs when I try to connect it to my PC's Monitor (yes, I have the adaptor). The problem is only the background appears on the Monitor when I plug it in (ya know, the blue wavy thing). Sometimes I get the mouse cursor, but no desktop or dock. The macbook recognizes that there is an external monitor, but it doesn't do anything about it.
    Has anyone had this problem before?

    It sounds to me like normal behavior when the system is set for "extended desktop". In that mode, the second monitor shows a completely different screen then the internal monitor; no menu bars or Dock will appear (that's all still on the primary monitor). That way you can drag windows, pallettes, etc. to the second monitor and clear the internal monitor for other uses.
    If you want both screens to show the same picture, go to the Arrangement tab in the Displays system preference and check the box that says "mirror displays". You can also in that same screen arrange the monitors so that they correct reflect the physical orientation (if you wish); for instance, setting it so that if the external monitor is on the right, you get to it by moving the cursor off the right edge of the main screen.
    Regards.

  • Startup Disk Full Error but disk shows only 20Gb on it!

    I have a 150 Gb startup drive. I keep getting the error that the stratup drive is full and Get Info shows only 300Mb left on drive! Do get info on the 5 directories on the drive, Applications, Developer, Library, System, and Users and it all adds up to just over 20Gb. Am I missing something here? Ran Disk Utilities and the disk verifies ok and verified permissions and ok. I am running Time Machine but it backs up to an external firewire drive, not the startup disk.
    I know that I can add another drive cheaply but I really want to know why this disk appears to be full. Any help? Thanks in advance!

    There are lots of hidden directories. There could be actual data instead of alias mount points under "/Volumes" which is often one reason.
    There are a couple programs to show where space is going, as well as sort output from terminal, but I prefer OmniGroup OmniDiskSweeper - look on MacUpdate - to show and access files. Program works fine even though shareware.
    And yes, you might want to use the Raptor? for something else and get even WD 640GB for $75, or the 3rd gen VelociRaptor 300GB $289.
    There are threads in "Using Leopard" regularly about "where did my space go."

  • Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?

    Trying to sync iPhone to pc but keeps getting internal device error on screen, also showing only 4gb size instead of 32gb. Uninstalled iTunes from pc and reloaded. Powered back up and all songs and info still in place. Anyone had this problem before?

    Doublechecking something Emcee. I see you've got Windows 7 x64, so I'm assuming you've got at least 4 GB of RAM. Do you also have an NVIDIA USB EHCI chipset on that PC? If so, see the following Microsoft document:
    [You encounter problems when you move data over USB from a Windows 7 or Windows Server 2008 R2-based computer that has an NVIDIA USB EHCI chipset and at least 4GB of RAM|http://support.microsoft.com/kb/976972]

  • Hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

    hi, i am having a problem in my ipad 2 , it is not showing main screen just showing a black blank screen in which downloading icon is only shwn which is continously and when i connect to itunes via windows 7 it showing this error (0xE8000065) can any one

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

Maybe you are looking for

  • Getting the length of a field in a database.

    I have a field in a database that has a char length of 20, is there anyway to get that length from the database.

  • Error 9

    My ipod touch is a 4th generation and has 8G. I started noticing my itouch wouldn't let me take pictures or put anything new on even though i had plenty of space. It also wouldn't allow me to delete things. And then when playing solitaire, i'd press

  • Applying TAX arte aganist total Invoice amount

    Hello ALL, We are trying to implement Oracle AR module for Taiwan. The lowest dollar amount use can poay in Taiwan is 1 taiwan dollar, there is no cents. But I oracle applications Ar is set up with 2 decimals and AR apply tax aganist each line, not a

  • HOW TO SEND THE REPORTS AND  THROUGH XI TO NON -SAP SYSTEM

    Hi Experts,              I want to know how to send the reports and  smartform through xi to another system. All the post blogs are   just explaning only about the FILE-TO-FILE, FILE-TO-IDOCS scenarios only.

  • Photo Stream upload- extremely slow

    I have over 7000 photos and was fast till today- now upload 30 photos took me 20 minutes. What's wrong? thanks.