Abap objects and alv
using abap objects and alv There should be push button (Switch drill down button) at the top of the report. While pressing Switch drill down button it should display a popup window like
material
material gorup
plant
For example if a material group is selected, the report should be displayed with respect to material group.
For example if it is Plant, the report should be displayed with respect to Plant.
Standard Drill down should be first with respect to material it should be displayed
after clicking it with respect to vendor it should be displayed
after that w.r.t month.
There should be push button ( topno button) at the top of the report.
you have to choose a key figure field and press topno.if PO value is chosen and if you press topno and give value as 3,the top three po value should be displayed.
Totals for Po value, order quantity and GR quantity should be displayed..
please, can anybody send me the code for above criteria immediatly.
Go through the Standard programs.. BCALV_GRID_*
BCALV_GRID_05 suits ur req.
Regards
Bhavani
Similar Messages
-
HI
Can anyone give me the link for ABAP Objects and BADI'S.
I would like to have ABAP Objects with Example as well as BADIS.
Please tell me as iam new to those.
Thanks in advanceHi,
ABAP objects have an elaborated list plz mention specific objects u want to know.
These are few of the links which I got through the sdn.sap for the objects like ALV,LSMW,IDOCS, etc..
Start with this.Refer this
For BDC:
http://myweb.dal.ca/hchinni/sap/bdc_home.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
http://www.sap-img.com/abap/learning-bdc-programming.htm
http://www.sapdevelopment.co.uk/bdc/bdchome.htm
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
Check these link:
http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
http://www.sap-img.com/abap/question-about-bdc-program.htm
http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
http://www.planetsap.com/bdc_main_page.htm
call Transaction or session method ?
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Check these step-by-step links
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
for Smartforms material
http://www.sap-basis-abap.com/sapsf001.htm
http://www.sap-press.com/downloads/h955_preview.pdf
http://www.ossincorp.com/Black_Box/Black_Box_2.htm
http://www.sap-img.com/smartforms/sap-smart-forms.htm
http://www.sap-img.com/smartforms/smartform-tutorial.htm
http://www.sapgenie.com/abap/smartforms.htm
How to trace smartform
http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
http://www.sap-img.com/smartforms/smart-006.htm
http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
Re: Need FAQ's
check most imp link
http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
step by step good ex link is....
http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
SAPScripts
http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
SAP SCRIPT FIELDS
http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
scripts easy material
http://www.allsaplinks.com/sap_script_made_easy.html
Debugging Document.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
BAPI
http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
Checkout !!
http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
http://techrepublic.com.com/5100-6329-1051160.html#
http://www.sap-img.com/bapi.htm
http://www.sap-img.com/abap/bapi-conventions.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sapgenie.com/abap/bapi/example.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
List of all BAPIs
http://www.planetsap.com/LIST_ALL_BAPIs.htm
http://www.sappoint.com/abap/bapiintro.pdf
http://www.sappoint.com/abap/bapiprg.pdf
http://www.sappoint.com/abap/bapiactx.pdf
http://www.sappoint.com/abap/bapilst.pdf
http://www.sappoint.com/abap/bapiexer.pdf
http://service.sap.com/ale
http://service.sap.com/bapi
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
Remote Function Call:
RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
RFCs manage the communication process, parameter transfer and error handling.
http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
ALE/ IDOC
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.sappoint.com/abap/ale.pdf
http://www.sappoint.com/abap/ale2.pdf
http://www.sapgenie.com/sapedi/idoc_abap.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
http://www.allsaplinks.com/idoc_sample.html
http://www.sappoint.com/abap.html
http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
http://www.sapgenie.com/sapedi/index.htm
http://www.allsaplinks.com/idoc_sample.html
Refer this
http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
http://www.****************/InterviewQ/interviewQ.htm
http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
http://www.techinterviews.com/?p=198
http://www.techinterviews.com/?p=326
http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
http://www.sap-img.com/abap/abap-interview-question.htm
http://www.allinterview.com/Interview-Questions/ABAP.html
links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com.
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
some more materials.
Go through the following Documents Links & Materials for ABAP Objects
check the below links lot of info and examples r there
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
/people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
/people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/09/understandingABAPObjects&
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
FOR BADI'S:
Check this blogs 2 find a BADI:
How to find if we have a BADI in Transaction VB02
Re: BADI for screen enhancement in MM01 transaction
Re: BADI and User exits
How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
When to Use a BAdI?)
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
How to implement a BAdI And How to Use a Filter
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
Introducing Business Add-Ins
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
How to implement BAdi in Enhancement Framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
Business Add-Ins
http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
BAdI: Customer-Defined Functions in the Formula Builder
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
You can check the links for Step by Step Badi Implemntation
(very helpful self learning docs).
BADI Step by Step Implementation.
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
The specified item was not found.
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
http://www.allsaplinks.com/badi.html
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-serieshttps:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40921dd7-d5cf-2910-1894-bb62316afbd1
http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
http://support.sas.com/rnd/papers/sugi30/SAP.ppt
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
http://members.aol.com/_ht_a/skarkada/sap/
http://www.ct-software.com/reportpool_frame.htm
http://www.saphelp.com/SAP_Technical.htm
http://www.kabai.com/abaps/q.htm
http://www.guidancetech.com/people/holland/sap/abap/
http://www.planetsap.com/download_abap_programs.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
/people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
Difference Between BADI and User Exits
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Reward Points if found helpfull..
Cheers,
Chandra Sekhar. -
Difference between abap object and function
hi all,
i read the book on abap object of the difference between abap object and classical abap.
i know that there is only 1 instance of a specific function group but somehow i still not so clear why subsequent vehicle cannot use the same function. i also can use the do and loop to call the function? if cannot then why?
hope can get the advice.
thanks
using function *********
function-pool vehicle.
data speed type i value 0.
function accelerate.
speed = speed + 1.
endfunction.
function show_speed.
write speed.
endfunction.
report xx.
start-of-selection.
*vehicle 1
call function 'accelerate'.
call function 'accelerate'.
call function 'show_speed'.
*vehicle 2
*vehicle 3
*****abap object*******
report xx.
data: ov type ref to vehicle,
ov_tab type table of ref to vehicle.
start-of-selection.
do 5 times.
create object ov.
append ov to ov_tab.
enddo.
loop at ov_tab into ov.
do sy-tabix times.
call method ov->accelerate.
enddo.
call method ov->show_speed.
endloop.Hi
Now try this:
REPORT ZTEST_VEHICLEOO .
PARAMETERS: P_CAR TYPE I,
P_READ TYPE I.
* CLASS vehicle DEFINITION
CLASS VEHICLE DEFINITION.
PUBLIC SECTION.
CLASS-DATA: MAX_SPEED TYPE I,
MAX_VEHICLE TYPE I,
NR_VEHICLES TYPE I.
CLASS-METHODS CLASS_CONSTRUCTOR.
METHODS CONSTRUCTOR.
METHODS ACCELERATE.
METHODS SHOW_SPEED.
METHODS GET_SPEED EXPORTING E_SPEED TYPE I.
PRIVATE SECTION.
DATA: SPEED TYPE I,
NR_VEHICLE TYPE I..
ENDCLASS.
* CLASS vehicle IMPLEMENTATION
CLASS VEHICLE IMPLEMENTATION.
METHOD CLASS_CONSTRUCTOR.
NR_VEHICLES = 0.
ENDMETHOD.
METHOD CONSTRUCTOR.
NR_VEHICLES = NR_VEHICLES + 1.
NR_VEHICLE = NR_VEHICLES.
ENDMETHOD.
METHOD ACCELERATE.
SPEED = SPEED + 1.
IF MAX_SPEED < SPEED.
MAX_SPEED = SPEED.
MAX_VEHICLE = NR_VEHICLE.
ENDIF.
ENDMETHOD.
METHOD SHOW_SPEED.
WRITE: / 'Speed of vehicle nr.', NR_VEHICLE, ':', SPEED.
ENDMETHOD.
METHOD GET_SPEED.
E_SPEED = SPEED.
ENDMETHOD.
ENDCLASS.
DATA: OV TYPE REF TO VEHICLE,
OV_TAB TYPE TABLE OF REF TO VEHICLE.
DATA: V_TIMES TYPE I,
FL_ACTION.
DATA: V_SPEED TYPE I.
START-OF-SELECTION.
DO P_CAR TIMES.
CREATE OBJECT OV.
APPEND OV TO OV_TAB.
ENDDO.
LOOP AT OV_TAB INTO OV.
IF FL_ACTION = SPACE.
FL_ACTION = 'X'.
V_TIMES = SY-TABIX * 2.
ELSE.
FL_ACTION = SPACE.
V_TIMES = SY-TABIX - 2.
ENDIF.
DO V_TIMES TIMES.
CALL METHOD OV->ACCELERATE.
ENDDO.
CALL METHOD OV->SHOW_SPEED.
ENDLOOP.
SKIP.
WRITE: / 'Higher speed', VEHICLE=>MAX_SPEED, 'for vehicle nr.',
VEHICLE=>MAX_VEHICLE.
SKIP.
READ TABLE OV_TAB INTO OV INDEX P_READ.
IF SY-SUBRC <> 0.
WRITE: 'No vehicle', P_READ.
ELSE.
CALL METHOD OV->GET_SPEED IMPORTING E_SPEED = V_SPEED.
WRITE: 'Speed of vehicle', P_READ, V_SPEED.
ENDIF.
Try to repeat this using a function group and I think you'll undestand because it'll be very hard to do it.
By only one function group how can u read the data of a certain vehicle?
Yes you can create in the function group an internal table where u store the data of every car: in this way u use the internal table like it was an instance, but you should consider here the example is very simple. Here we have only the speed as characteristic, but really we can have many complex characteristics.
Max -
Hi every one,
Can <b>ABAP Objects and EJB</b> be compared?
-Naveen.Hi Naveen,
Check this guide- might be useful-
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/dc09af90-0201-0010-d09b-bd611a11070b
Regards,
Moorthy -
Differences between ABAP lists and ALV lists
what is the differences between ABAP lists and ALV lists?
Edited by: pong pong on Apr 9, 2008 5:08 AMHello Pong Pong,
Please go thru help topics:
ALV Grid
http://help.sap.com/saphelp_47x200/helpdata/en/bf/3bd1369f2d280ee10000009b38f889/frameset.htm
ABAP Lists
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb408a455611d189710000e8322d00/frameset.htm
Regards,
Siddhesh -
Doc plz on abap object and Module pool prog
Hi all,
Please any send the details and use full documents on ABAP objects and Module Programming.
Its very orgent for me
THanks and Regards
vamsin
[email protected]Hi ALL,
Thank you for your replies, I guess I dint convey my question properly,
I have called a Selection-Screen in Module Pool .
These were the steps which i followed to archive this.
1. Created a subscreen area in your screen layout (Main Screen- Module Pool).
2. In the Top Include of Module pool program declared a Selection-Screen as a subscreen.
TOP-INCLUDE.
SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
SELECTION-SCREEN BEGIN OF BLOCK d3 WITH FRAME TITLE text-003.
PARAMETERS : grdate RADIOBUTTON GROUP r2 DEFAULT 'X' USER-COMMAND FR1. " GRN date
PARAMETERS : crdate RADIOBUTTON GROUP r2 . " Current Date
SELECTION-SCREEN END OF BLOCK d3.
SELECTION-SCREEN END OF SCREEN 400.
3. In the PBO and PAI of the Main Screen called Subscreen.
PBO
CALL SUBSCREEN SUB_SCREEN_STAPLES INCLUDING 'zprogram' '0400'.
PAI
CALL SUBSCREEN SUB_SCREEN_STAPLES..
I have to do certain operations when the user selects the radio button on subscreen (which is actually a Selection-Screen).
I have tried to assign the function code to radio button and as this screen is a Selection-Screen I cannot use PAI and PBO.
Used the below code in TOP-INCLUDE.
TOP-Include
AT SELECTION-SCREEN ON RADIOBUTTON GROUP r2.
CASE ok_rb.
WHEN 'FR1' .
IF crdate = 'X'.
pdate = sy-datum.
ELSE.
pdate = sy-datum + 1.
ENDIF.
ENDCASE.
But after executing this logic the flow is going to PAI which is validating the mandatory fields of Module-Pool Screen (which is not part of sub screen), hence not solving my purpose.
Is there any way by which I can Only trigger the AT-Selection screen for the selection screen.
or Any other approach which will solve my purpose.
Thanks a lot for Suggestions and Inputs. -
ABAP Objects and table processing (with logical databases)
I have a report that is written right now using procedural abap and a logical database. The report is structured follows (high level):
start-of-selection.
get pernr.
perform get_it0001 using wtab.
perform get_it0002 using wtab.
perform get_it0003 using wtab.
append wtab to itab.
end-of-selection.
call function 'reuse_alv_grid_display'
exporting
i_structure_name = 'itabstructure'
tables
t_outtab = itab.
So basically I'm going through a bunch of personnel numbers, getting a few infotypes and outputting to ALV. I don't see where ABAP Objects is going to help me for this particular program.
Can somebody show me where OO ABAP would make this easier? Does it even make sense to use OO when you're processing with a logical database? (Not just PNP, but any logical database in general).
Thanks in advance.Hello Lee
I assume that the routines GET_ITnnnn are written by yourself. For reading infotypes ABAP Objects provides us with same very helpful classes as shown below:
* define data
DATA:
gif_employee type ref to if_pt_employee,
go_employee type ref to cl_pt_employee,
gt_infotypes TYPE tim_tmw_itlist_tab,
go_control TYPE REF TO if_pt_td_control,
go_data TYPE REF TO if_pt_td_base,
go_pnnnn TYPE REF TO if_pt_td_itnnnn,
gt_p0001 TYPE TIM_P0001_TAB,
gt_p0002 TYPE TIM_P0002_TAB,
gt_p0003 TYPE TIM_P0003_TAB.
start-of-selection.
GET pernr.
<b>* Create employee instance</b>
gif_employee = cl_pt_employee=>get_employee( pernr ).
go_employee ?= gif_employee.
<b>* Get master infotypes (0001, 0002)</b>
CALL METHOD go_employee->get_master_data
EXPORTING
im_begda = id_fromdate
im_endda = id_todate
IMPORTING
* EX_I0000 =
EX_I0001 = gt_p0001
EX_I0002 = gt_p0002
* EX_I0007 =
* EX_I0008 =
<b>* Append all other required infotypes to itab</b>
APPEND '0003' TO gt_infotypes.
CALL METHOD go_employee->get_infotypes
EXPORTING
i_itlist = gt_infotypes
i_fromdate = id_fromdate " start date
i_todate = id_todate " end date
* I_FILTER =
i_noauthcheck = 'X'
IMPORTING
e_result = gt_infty_request
e_retcd = gd_retcd.
* Please see documentation of parameter e_retcd...
LOOP AT gt_infty_request INTO go_control.
go_data = go_control->data. <b>" get data object</b>
* Casting
TRY.
go_pnnnn ?= go_data.
CATCH cx_sy_move_cast_error.
CONTINUE.
ENDTRY.
<b>* Convert infotype (semi-transparent -> transparent)</b>
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = lo_pnnnn->prelp
IMPORTING
pnnnn = gs_p0003.
APPEND gs_p0027 TO gt_p0003.
ENDLOOP.
The class CL_PT_EMPLOYEE provides us already with very easy access to so-called master infotypes (000, 0001, 0002, 0007 and 0008). All other infotypes can be read using method GET_INFOTYPES.
Using these classes we have a very convenient and standardized way of accessing all kinds of infotypes.
Regards
Uwe -
Abap objects and selection screen
Hello everybody,
I am interested in your ways of implementing selection-screens in the style of ABAP Objects.
In earlier times (when I used to implement ABAP objects in a procedural way) I just put the selection-screen commands in an include or a form routine of my ABAP report. So it was possible to run the report in background.
Now I read something about selection-screens/dynpros and "separation of concerns" in the book "ABAP Objects" written by Keller. He advises using function groups to encapsulate presentation from logical matters. (Selection-screen commands are in an automatically generated include now). I implemented this way. (ABAP report with a local class, which has a main method, where function module of the function group is called). It works, but i see no chance to run my report in background now.. but I need to run the report in background.
Does anybody know a solution without deleting function group?
What do you think is the best way of using selection-screen-commands and ABAP Objects, especially regarding running in background?
Thx for your advise in advance.
Kind regards,
AnneHi Naimesh,
thx for explanation. I am not sure, if I understood everything in the right way.
Where do you write the code for building the selection-screen? (PARAMETERS, SELECT-OPTIONS etc.)
If you write these commands in a class method, you will get a syntax error ( because it's forbidden per definition of ABAP objects). So, am I right assuming that you put the coding just at the beginning of the ABAP report ? And after START-OF-SELECTION-event you start the processing... ?
Furthermore, I don't really understand why you create an separate class for ALV. I found your "SAP abap help"-blog, where you explained the concept of MVC ((By the way, well done!), but you didn't mention an "ALV class" there..
Mh.. another question - have you ever combined MVC with object services?
At the moment I'm working on a software project where I use object services. I created 2 persistent classes via SE24 and one local class in my ABAP Report.
I don't really see possibility to implement MVC in this project without change very much of coding and class structure...
In my opinion the M (data&business logic) are my existing global classes and my local class is kind of Controller class?!
Thx in advance,
Anne -
Hi,
I would like to discuss pro and cons of using ABAP Objects for custom development related to upgrades. For example, it seems to be an advantage to encapsulate standard functionality. Through encapsulation the calling programs do not have to care about whether or not the underlying functionality has been changed. Reuse makes it possible to adapt affected areas centrally without having to make changes in various places. However, I saw a thread in this forum regarding older ABAP Objects programming which was obsolete after an upgrade. Even if it seems good that obsolete statements are detected and can be exchanged, it is additional upgrade work which would have been avoided if the code had not been written in ABAP Objects.
Please share you pros and cons regarding this subject.
Thanks!J@Y - it's a good link to an interesting discussion. But it's 5 years old... ABAP Objects has moved on since then. ( Also, (moderator hat on) please refrain from just posting links without at least giving an indication of what the links are about ).
To the original poster. I think it is VERY unlikely that statements that are allowed now in an OO environment will be disallowed in future. I've been working in Objects since 46C, and have been careful to observe the warnings, and also quick to adopt the new syntax and reject the obsolete (even before it became necessary). The only remedial work I've had to do in ten years, is on a few classes, where the constructor wasn't calling the super constructor. And that was easily identified and remedied.
My experience has been, in those last ten years, that properly written object oriented code leads to developments that are much easier and quicker to maintain - and therefore, a lot cheaper. And that's the bottom line.
matt -
hi all
I have a question. I have made several ABAP objects which i am using in my programs. But now i have to build a AIF with those objects, but i understand that AIF in SAP cannot retrieve objects immediately.
Also i saw that if i want to create all kinds of internal tables and structures, it would cost me a lot of work.
Is there a solution where i can use those objects with AIF?
kind regards,
Anton PierhagenHi Otto
That was my idea. Because ABAP OO is the new type of programming in ABAP .
So i hoped i could transfer objects from the ABAP objects to variables in the PDF layout.
But the only way to do this ( whiich i only see it ) is to translate the variables of the objects to values in tables and structures.
That's not a very useful manner i would like to program my application. Because first i put everything in objects and afterwards i set everything back in tables and structures.. I had better set everything in custom structures and tables immediately.
So i am going to find another way. Maybe i set all the data in an HTML page and transfer this via mail and so on.
But thanks for your reply!
Kind regards
Anton Pierhagen -
Hello everyone,
I would like to know if it is possible to have instances of a class as a part of a controller context. You know, like if you added a service call to a BAPI or a function group, but with method calls to an object instead.
I have a feeling, that it is uncommon to bring Web Dynpro and the object orientation of ABAP Objects together.
For example, i don't want the event handling code of my controllers to call function groups, which in turn make calls to my object oriented model. Is there a way to skip that nasty imperative step?
Sorry for asking questions which may sound vague or naive, I'm kind of a beginner regarding Web Dynpro and ABAP.
cheers,
Jens BarthelThere's no need at all to have function modules in the way.
You can have either controller attributes or context attributes defined as object references, and then call methods from those objects instead...
In both cases, you just have to use TYPE REF TO instead of TYPE when defining the attributes.
Furthermore, if you have a central class through which you interact with your OO model, you can define it as Assistance class and then you'll have an instance automatically in all the controllers...the drawback / advantage is that you do not control its instantiation which is done by the framework.
Regards
Edited by: Alejandro Bindi on Oct 14, 2008 6:23 PM -
How to Implement Abap Object and Access Key for se24 developers.
Hi every One,
This is Abdul Rahman, Started Learning Abap Objects i want a simple program to be executed i.e. in Local class (Abap program)and as well in global class(class builder).
Also i would like to know When ,Were and Why Abap Object should be used.
prob to Me :- When i wanted execute F8 a Class in se24 Class Builder it is asking me AcessKey , plz if this is required plz any one send Me.
I have this key 36687663221261278694 it is already used in Abap editor , it is not accepting in se24 .
plz help Me , waiting for response ..
thankyou so much
Abdul Rahman.Hello Abdul
Here are my answers to your questions:
(1) <b>Local classes</b>: <i>Do not use them.</i>
- As long as your class is rather small (few attributes and methods), local classes are ok yet as soon as they become larger you will loose the overview
(2) <b>Global classes</b>: <i>Do use them.</i>
- Make use of global classes even if they are only used for your training. The big advantage over local classes is that you will get used to the classe builder (SE24) which has a plethora of functions.
(3) <b>Executing global classes</b>: <i>Can be done if you have defined an OO-transaction.</i>
- An OO-transaction has a class and one of its public methods as parameters (similar like report transactions). When you all the OO-transaction an instance of you class is created and the public method is called.
(4) <b>Where and Why use ABAP Objects?</b> <i>Everywhere. Anytime.</i>
- ABAP objects is about stability, maintainability and re-usability of coding. These developer aims can be much more fulfilled using ABAP OO means than in classical programming.
Regards
Uwe
PS: There are situations where local classes are quite appropriate and, using ABAP Unit testing, are obligatory. -
How to use ABAP objects in ALV
Can u give me the steps for doing ALV with ABAP objects
Hello Mohammed
Here are a few simplified version of the SAP sample reports that I have posted within SDN.
This is a variant of my previously posted report ZUS_SDN_ALVGRID_EVENTS. Both dynpros (100 & 200) do not contain any elements. For simplicity I used the same flow logic for both dynpros:
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
<b>&----
*& Report ZUS_SDN_ALVGRID_EVENTS_1
&----</b>
REPORT zus_sdn_alvgrid_events_1.
DATA:
gd_okcode TYPE ui_func,
gt_fcat TYPE lvc_t_fcat,
go_docking TYPE REF TO cl_gui_docking_container,
go_docking2 TYPE REF TO cl_gui_docking_container,
go_grid1 TYPE REF TO cl_gui_alv_grid,
go_grid2 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_t001 TYPE STANDARD TABLE OF t001,
gt_knb1 TYPE STANDARD TABLE OF knb1.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_double_click FOR EVENT double_click OF cl_gui_alv_grid
IMPORTING
e_row
e_column
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
DATA:
ls_t001 TYPE t001,
ls_col_id TYPE lvc_s_col.
CHECK ( sender = go_grid1 ).
READ TABLE gt_t001 INTO ls_t001 INDEX e_row-index.
CHECK ( ls_t001-bukrs IS NOT INITIAL ).
SELECT * FROM knb1 INTO TABLE gt_knb1
WHERE bukrs = ls_t001-bukrs.
IF ( syst-subrc NE 0 ).
MESSAGE 'No customers found' TYPE 'S'.
ELSE.
* Trigger PAI of dynpro '0100' and set new ok-code
CALL METHOD cl_gui_cfw=>set_new_ok_code( 'CALL_SCREEN_0200' ).
ENDIF.
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM t001 INTO TABLE gt_t001.
REFRESH: gt_knb1.
* Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_docking2
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_docking
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_grid2
EXPORTING
i_parent = go_docking2
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
lcl_eventhandler=>handle_double_click FOR go_grid1.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
EXPORTING
i_structure_name = 'T001'
CHANGING
it_outtab = gt_t001
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_grid2->set_table_for_first_display
EXPORTING
i_structure_name = 'KNB1'
CHANGING
it_outtab = gt_knb1
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD go_docking2->link
EXPORTING
repid = syst-repid
dynnr = '0200'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
WHEN 'CALL_SCREEN_0200'.
go_grid2->refresh_table_display( ). " necessary
CALL SCREEN '0200'.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
The following sample report ZUS_SDN_ALVGRID_EVENTS shows how to call a transaction when event HOTSPOT_CLICK was raised:
<b>&----
*& Report ZUS_SDN_TWO_ALV_GRIDS
&----</b>
REPORT ZUS_SDN_ALVGRID_EVENTS.
DATA:
gd_okcode TYPE ui_func,
gt_fcat TYPE lvc_t_fcat,
go_docking TYPE REF TO cl_gui_docking_container,
go_grid1 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1.
PARAMETERS:
p_bukrs TYPE bukrs DEFAULT '1000' OBLIGATORY.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
* define local data
DATA:
ls_knb1 TYPE knb1,
ls_col_id type lvc_s_col.
READ TABLE gt_knb1 INTO ls_knb1 INDEX e_row_id-index.
CHECK ( ls_knb1-kunnr IS NOT INITIAL ).
SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
* Set active cell to field BUKRS otherwise the focus is still on
* field KUNNR which will always raise event HOTSPOT_CLICK
ls_col_id-fieldname = 'BUKRS'.
CALL METHOD go_grid1->set_current_cell_via_id
EXPORTING
IS_ROW_ID = e_row_id
IS_COLUMN_ID = ls_col_id.
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1
WHERE bukrs = p_bukrs.
* Create docking container
CREATE OBJECT go_docking
EXPORTING
parent = cl_gui_container=>screen0
ratio = 90
EXCEPTIONS
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid1
EXPORTING
i_parent = go_docking
EXCEPTIONS
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Set event handler
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR go_grid1.
* Build fieldcatalog and set hotspot for field KUNNR
PERFORM build_fieldcatalog_knb1.
* Display data
CALL METHOD go_grid1->set_table_for_first_display
CHANGING
it_outtab = gt_knb1
it_fieldcatalog = gt_fcat
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
CALL METHOD go_docking->link
EXPORTING
repid = syst-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gd_okcode.
WHEN 'BACK' OR
'END' OR
'CANC'.
SET SCREEN 0. LEAVE SCREEN.
WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form BUILD_FIELDCATALOG_KNB1
* text
* --> p1 text
* <-- p2 text
FORM build_fieldcatalog_knb1 .
* define local data
DATA:
ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
* I_BUFFER_ACTIVE =
i_structure_name = 'KNB1'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_BYPASSING_BUFFER =
* I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'KUNNR'.
IF ( syst-subrc = 0 ).
ls_fcat-hotspot = abap_true.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDIF.
ENDFORM. " BUILD_FIELDCATALOG_KNB1
Please note that the direct CALL TRANSACTION does not check the user's authority. To do so you could call the transaction using function module ABAP4_CALL_TRANSACTION.
Here is a sample program for OO-based ALV grids (CL_GUI_ALV_GRID) that simulates radio buttons by using icons with hotspots.
<b>PROGRAM ZUS_SDN_BCALV_GRID_DEMO_2.</b>
* Based on: BCALV_GRID_DEMO.
TYPE-POOLS: icon.
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1 TYPE lvc_emphsz.
TYPES: button2 TYPE lvc_emphsz.
TYPES: button3 TYPE lvc_emphsz.
TYPES: button4 TYPE lvc_emphsz.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight TYPE STANDARD TABLE OF ty_s_sflight,
gt_fcat TYPE lvc_t_fcat.
DATA: ok_code LIKE sy-ucomm,
* gt_sflight TYPE TABLE OF sflight,
g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_cnt TYPE i.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
* define local data
FIELD-SYMBOLS:
<ls_entry> TYPE ty_s_sflight,
<ld_fld> TYPE ANY.
READ TABLE gt_sflight ASSIGNING <ls_entry> INDEX es_row_no-row_id.
CHECK ( <ls_entry> IS ASSIGNED ).
* Set all radio buttons "unselected"
<ls_entry>-button1 = icon_wd_radio_button_empty.
<ls_entry>-button2 = icon_wd_radio_button_empty.
<ls_entry>-button3 = icon_wd_radio_button_empty.
<ls_entry>-button4 = icon_wd_radio_button_empty.
ASSIGN COMPONENT e_column_id-fieldname OF STRUCTURE <ls_entry>
TO <ld_fld>.
IF ( <ld_fld> IS ASSIGNED ).
* Set selected radio button "selected".
<ld_fld> = icon_wd_radio_button.
ENDIF.
* Force PAI followed by refresh of table display in PBO
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DUMMY'
* IMPORTING
* RC =
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
* MAIN *
PERFORM select_data.
CALL SCREEN 100.
* MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
PERFORM build_fieldcatalog.
CALL METHOD grid1->set_table_for_first_display
* EXPORTING
* i_structure_name = 'SFLIGHT'
CHANGING
it_fieldcatalog = gt_fcat
it_outtab = gt_sflight.
* Set event handler for event TOOLBAR
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR grid1.
else.
CALL METHOD grid1->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
others = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. "PBO OUTPUT
* MODULE PAI INPUT *
MODULE pai INPUT.
* to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
* do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
* FORM EXIT_PROGRAM *
FORM exit_program.
* CALL METHOD G_CUSTOM_CONTAINER->FREE.
* CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM. "EXIT_PROGRAM
*& Form BUILD_FIELDCATALOG
* text
* --> p1 text
* <-- p2 text
FORM build_fieldcatalog .
* define local data
DATA:
ls_fcat TYPE lvc_s_fcat,
ls_hype TYPE lvc_s_hype.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
* I_BUFFER_ACTIVE =
i_structure_name = 'LVC_S_FCAT'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_BYPASSING_BUFFER =
* I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'EMPHASIZE' ).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
* I_BUFFER_ACTIVE =
i_structure_name = 'SFLIGHT'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_BYPASSING_BUFFER =
* I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'EMPHASIZE'.
IF ( syst-subrc = 0 ).
DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-icon = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON3'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON2'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON1'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form SELECT_DATA
* text
* --> p1 text
* <-- p2 text
FORM select_data .
* define local data
DATA:
ls_sflight TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button.
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
MODIFY gt_sflight FROM ls_sflight
TRANSPORTING button1 button2 button3 button4
WHERE ( carrid IS NOT INITIAL ).
ENDFORM. " SELECT_DATA
The various aspects of ALV list programming are collected within the reuse library (transaction <b>SE83</b>).
And do not miss to look at <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907">Easy Reference to ALV Grid Control</a>
Regards
Uwe -
Can anyone tell me if it is possible to use objects created in ABAP within a workflow without creating an object in the BOR ?
It's surely not possible in 4.6C .
Regarding 4.7 also , I am not sure if it is possible using Object Category....
It does not seem to possible on miniSAP..
Ok i think it's supported in 4.7.
You can check the object category field ( e.g in transaction PFTC ), you can specify the category of the object type used. Currently only object types from the Business Object Repository and from ABAP classes are supported.
Cheers,
Ram
Message was edited by: Ram Manohar Tiwari -
Hi,
The following is a public attribute in the class CL_MEREP_SYNCBO_META
data FIELD_GROUPS type MEREP_TSYNCBO_FIELD_GROUP read-only .
MEREP_TSYNCBO_FIELD_GROUP is a table type having ref type CL_MEREP_SYNCBO_FIELD_GROUP (which is a class)
What is the meaning of such table type?
Regards,
RaviHi Ravi,
It simply means that any data object that is declared using this table type will be able to hold the objects (actually object-references) of that class.
You can think of it as an array of pointers (to objects).
Regards,
Anand Mandalika.
Maybe you are looking for
-
T3 doesn't read photos in SD card
Hi, I just inherited a Tungsten T3 and was able to get a 2G SD card for it. I copied some of my photos in jpg into the card using a card reader/writer but when I tried to open it in my palm it doesn't show the pics. Do I need a photo viewer? Please h
-
How do I "Save a Frame" in iMovie '09?
Is there a way to "save a frame" as was a feature in imovie HD?
-
Trouble with DefaultCellEditor
Hi, The program uses a JTable for data input. The table should have 20 rows and these data types in each row. int | double | double I've used AbstractTableModel to setup which cells are editable and the way the cols data is displayed. Now I need one-
-
Flash SWF file within Swing JFrame
I was wondering whether its possible to open a Flash swf file within a JFrame I am looking for a solution similar to the usage of Flash Activex control in .NET thanks in advance Vikas
-
Accessing XML files through java
Can any one explain me the easiest way of accessing XML files from Java.