ABAP Objects and Workflow

Can anyone tell me if it is possible to use objects created in ABAP within a workflow without creating an object in the BOR ?

It's surely not possible in 4.6C .
Regarding 4.7 also , I am not sure if it is possible using Object Category....
It does not seem to possible on miniSAP..
Ok i think it's supported in 4.7.
You can check the object category field ( e.g in transaction PFTC ), you can specify the category of the object type used. Currently only object types from the Business Object Repository and from ABAP classes are supported.
Cheers,
Ram
Message was edited by: Ram Manohar Tiwari

Similar Messages

  • Difference between abap object and function

    hi all,
    i read the book on abap object of the difference between abap object and classical abap.
    i know that there is only 1 instance of a specific function group but somehow i still not so clear why subsequent vehicle cannot use the same function. i also can use the do and loop to call the function? if cannot then why?
    hope can get the advice.
    thanks
    using function *********
    function-pool vehicle.
    data speed type i value 0.
    function accelerate.
    speed = speed + 1.
    endfunction.
    function show_speed.
    write speed.
    endfunction.
    report xx.
    start-of-selection.
    *vehicle 1
    call function 'accelerate'.
    call function 'accelerate'.
    call function 'show_speed'.
    *vehicle 2
    *vehicle 3
    *****abap object*******
    report xx.
    data: ov type ref to vehicle,
             ov_tab type table of ref to vehicle.
    start-of-selection.
    do 5 times.
    create object ov.
    append ov to ov_tab.
    enddo.
    loop at ov_tab into ov.
    do sy-tabix times.
    call method ov->accelerate.
    enddo.
    call method ov->show_speed.
    endloop.

    Hi
    Now try this:
    REPORT ZTEST_VEHICLEOO .
    PARAMETERS: P_CAR   TYPE I,
                P_READ  TYPE I.
    *       CLASS vehicle DEFINITION
    CLASS VEHICLE DEFINITION.
      PUBLIC SECTION.
        CLASS-DATA: MAX_SPEED   TYPE I,
                    MAX_VEHICLE TYPE I,
                    NR_VEHICLES TYPE I.
        CLASS-METHODS CLASS_CONSTRUCTOR.
        METHODS CONSTRUCTOR.
        METHODS ACCELERATE.
        METHODS SHOW_SPEED.
        METHODS GET_SPEED EXPORTING E_SPEED TYPE I.
      PRIVATE SECTION.
        DATA: SPEED      TYPE I,
              NR_VEHICLE TYPE I..
    ENDCLASS.
    *       CLASS vehicle IMPLEMENTATION
    CLASS VEHICLE IMPLEMENTATION.
      METHOD CLASS_CONSTRUCTOR.
        NR_VEHICLES = 0.
      ENDMETHOD.
      METHOD CONSTRUCTOR.
        NR_VEHICLES = NR_VEHICLES + 1.
        NR_VEHICLE  = NR_VEHICLES.
      ENDMETHOD.
      METHOD ACCELERATE.
        SPEED = SPEED + 1.
        IF MAX_SPEED < SPEED.
          MAX_SPEED   = SPEED.
          MAX_VEHICLE = NR_VEHICLE.
        ENDIF.
      ENDMETHOD.
      METHOD SHOW_SPEED.
        WRITE: / 'Speed of vehicle nr.', NR_VEHICLE, ':', SPEED.
      ENDMETHOD.
      METHOD GET_SPEED.
        E_SPEED = SPEED.
      ENDMETHOD.
    ENDCLASS.
    DATA: OV     TYPE REF TO VEHICLE,
          OV_TAB TYPE TABLE OF REF TO VEHICLE.
    DATA: V_TIMES TYPE I,
          FL_ACTION.
    DATA: V_SPEED TYPE I.
    START-OF-SELECTION.
      DO P_CAR TIMES.
        CREATE OBJECT OV.
        APPEND OV TO OV_TAB.
      ENDDO.
      LOOP AT OV_TAB INTO OV.
        IF FL_ACTION = SPACE.
          FL_ACTION = 'X'.
          V_TIMES = SY-TABIX * 2.
        ELSE.
          FL_ACTION = SPACE.
          V_TIMES = SY-TABIX - 2.
        ENDIF.
        DO V_TIMES TIMES.
          CALL METHOD OV->ACCELERATE.
        ENDDO.
        CALL METHOD OV->SHOW_SPEED.
      ENDLOOP.
      SKIP.
      WRITE: / 'Higher speed', VEHICLE=>MAX_SPEED, 'for vehicle nr.',
                VEHICLE=>MAX_VEHICLE.
      SKIP.
      READ TABLE OV_TAB INTO OV INDEX P_READ.
      IF SY-SUBRC <> 0.
        WRITE: 'No vehicle', P_READ.
      ELSE.
        CALL METHOD OV->GET_SPEED IMPORTING E_SPEED = V_SPEED.
        WRITE: 'Speed of vehicle', P_READ, V_SPEED.
      ENDIF.
    Try to repeat this using a function group and I think you'll undestand because it'll be very hard to do it.
    By only one function group how can u read the data of a certain vehicle?
    Yes you can create in the function group an internal table where u store the data of every car: in this way u use the internal table like it was an instance, but you should consider here the example is very simple. Here we have only the speed as characteristic, but really we can have many complex characteristics.
    Max

  • Abap objects and alv

    using abap objects and alv  There should be  push button (Switch drill down button) at the top of the report. While pressing Switch drill down button it should display a popup window like
    material
    material gorup
    plant
    For example if a material group is selected, the report should be displayed with respect to material group.
    For example if it is Plant, the report should be displayed with respect to Plant.
    Standard Drill down should be first with respect to material it should be displayed…after clicking it with respect to vendor it should be displayed…after that w.r.t month.
    There should be  push button ( topno button) at the top of the report.
    you have to choose a key figure field and press topno.if  PO value is chosen and if you press topno and give value as 3,the top three po value should be displayed.
    Totals for Po value, order quantity and GR quantity should be displayed..
    please, can anybody send me the code for above criteria immediatly.

    Go through the Standard programs.. BCALV_GRID_*
    BCALV_GRID_05 suits ur req.
    Regards
    Bhavani

  • ABAP Objects and BADI

    HI
    Can anyone give me the link for ABAP Objects and BADI'S.
    I would like to have ABAP Objects with Example as well as BADIS.
    Please tell me as iam new to those.
    Thanks in advance

    Hi,
    ABAP objects have an elaborated list plz mention specific objects u want to know.
    These are few of the links which I got through the sdn.sap for the objects like ALV,LSMW,IDOCS, etc..
    Start with this.Refer this
    For BDC:
    http://myweb.dal.ca/hchinni/sap/bdc_home.htm
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/bdc&
    http://www.sap-img.com/abap/learning-bdc-programming.htm
    http://www.sapdevelopment.co.uk/bdc/bdchome.htm
    http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/69/c250684ba111d189750000e8322d00/frameset.htm
    http://www.sapbrain.com/TUTORIALS/TECHNICAL/BDC_tutorial.html
    Check these link:
    http://www.sap-img.com/abap/difference-between-batch-input-and-call-transaction-in-bdc.htm
    http://www.sap-img.com/abap/question-about-bdc-program.htm
    http://www.itcserver.com/blog/2006/06/30/batch-input-vs-call-transaction/
    http://www.planetsap.com/bdc_main_page.htm
    call Transaction or session method ?
    http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
    http://www.****************/InterviewQ/interviewQ.htm
    http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
    Reports
    http://www.sapgenie.com/abap/reports.htm
    http://www.allsaplinks.com/material.html
    http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    ALE/ IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    Check these step-by-step links
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/ccab6730-0501-0010-ee84-de050a6cc287
    https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/8fd773b3-0301-0010-eabe-82149bcc292e
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3c5d9ae3-0501-0010-0090-bdfb2d458985
    for Smartforms material
    http://www.sap-basis-abap.com/sapsf001.htm
    http://www.sap-press.com/downloads/h955_preview.pdf
    http://www.ossincorp.com/Black_Box/Black_Box_2.htm
    http://www.sap-img.com/smartforms/sap-smart-forms.htm
    http://www.sap-img.com/smartforms/smartform-tutorial.htm
    http://www.sapgenie.com/abap/smartforms.htm
    How to trace smartform
    http://help.sap.com/saphelp_47x200/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
    http://www.help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
    http://www.sap-img.com/smartforms/smart-006.htm
    http://www.sap-img.com/smartforms/smartforms-faq-part-two.htm
    Re: Need FAQ's
    check most imp link
    http://www.sapbrain.com/ARTICLES/TECHNICAL/SMARTFORMS/smartforms.html
    step by step good ex link is....
    http://smoschid.tripod.com/How_to_do_things_in_SAP/How_To_Build_SMARTFORMS/How_To_Build_SMARTFORMS.html
    SAPScripts
    http://esnips.com/doc/1ff9f8e8-0a4c-42a7-8819-6e3ff9e7ab44/sapscripts.pdf
    http://esnips.com/doc/1e487f0c-8009-4ae1-9f9c-c07bd953dbfa/script-command.pdf
    http://esnips.com/doc/64d4eccb-e09b-48e1-9be9-e2818d73f074/faqss.pdf
    http://esnips.com/doc/cb7e39b4-3161-437f-bfc6-21e6a50e1b39/sscript.pdf
    http://esnips.com/doc/fced4d36-ba52-4df9-ab35-b3d194830bbf/symbols-in-scripts.pdf
    http://esnips.com/doc/b57e8989-ccf0-40d0-8992-8183be831030/sapscript-how-to-calculate-totals-and-subtotals.htm
    SAP SCRIPT FIELDS
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/d1/8033ea454211d189710000e8322d00/content.htm
    scripts easy material
    http://www.allsaplinks.com/sap_script_made_easy.html
    Debugging Document.
    http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
    http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
    http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
    http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
    http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
    BAPI
    http://help.sap.com/saphelp_46c/helpdata/en/9b/417f07ee2211d1ad14080009b0fb56/frameset.htm
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    Checkout !!
    http://searchsap.techtarget.com/originalContent/0,289142,sid21_gci948835,00.html
    http://techrepublic.com.com/5100-6329-1051160.html#
    http://www.sap-img.com/bapi.htm
    http://www.sap-img.com/abap/bapi-conventions.htm
    http://www.sappoint.com/abap/bapiintro.pdf
    http://www.sapgenie.com/abap/bapi/example.htm
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCMIDAPII/CABFAAPIINTRO.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CABFABAPIREF/CABFABAPIPG.pdf
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCFESDE8/BCFESDE8.pdf
    List of all BAPIs
    http://www.planetsap.com/LIST_ALL_BAPIs.htm
    http://www.sappoint.com/abap/bapiintro.pdf
    http://www.sappoint.com/abap/bapiprg.pdf
    http://www.sappoint.com/abap/bapiactx.pdf
    http://www.sappoint.com/abap/bapilst.pdf
    http://www.sappoint.com/abap/bapiexer.pdf
    http://service.sap.com/ale
    http://service.sap.com/bapi
    http://www.geocities.com/mpioud/Abap_programs.html
    http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
    Simple ALV report
    http://www.sapgenie.com/abap/controls/alvgrid.htm
    http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    2. How do I program double click in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=11601
    http://www.sapfans.com/forums/viewtopic.php?t=23010
    3. How do I add subtotals (I have problem to add them)...
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    4. How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    5. How to print page number / total number of pages X/XX in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
    6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
    http://www.sapfans.com/forums/viewtopic.php?t=64320
    http://www.sapfans.com/forums/viewtopic.php?t=44477
    7. How can I set the cell color in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=52107
    8. How do I print a logo/graphics in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=81149
    http://www.sapfans.com/forums/viewtopic.php?t=35498
    http://www.sapfans.com/forums/viewtopic.php?t=5013
    9. How do I create and use input-enabled fields in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=84933
    http://www.sapfans.com/forums/viewtopic.php?t=69878
    10. How can I use ALV for reports that are going to be run in background?
    http://www.sapfans.com/forums/viewtopic.php?t=83243
    http://www.sapfans.com/forums/viewtopic.php?t=19224
    11. How can I display an icon in ALV? (Common requirement is traffic light icon).
    http://www.sapfans.com/forums/viewtopic.php?t=79424
    http://www.sapfans.com/forums/viewtopic.php?t=24512
    12. How can I display a checkbox in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=88376
    http://www.sapfans.com/forums/viewtopic.php?t=40968
    http://www.sapfans.com/forums/viewtopic.php?t=6919
    Go thru these programs they may help u to try on some hands on
    ALV Demo program
    BCALV_DEMO_HTML
    BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
    BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
    BCALV_GRID_DEMO Simple ALV Control Call Demo Program
    BCALV_TREE_DEMO Demo for ALV tree control
    BCALV_TREE_SIMPLE_DEMO
    BC_ALV_DEMO_HTML_D0100
    Remote Function Call:
    RFC is an SAP interface protocol. Based on CPI-C, it considerably simplifies the programming of communication processes between systems.
    RFCs enable you to call and execute predefined functions in a remote system - or even in the same system.
    RFCs manage the communication process, parameter transfer and error handling.
    http://help.sap.com/saphelp_47x200/helpdata/en/22/042860488911d189490000e829fbbd/frameset.htm.
    ALE/ IDOC
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.sappoint.com/abap/ale.pdf
    http://www.sappoint.com/abap/ale2.pdf
    http://www.sapgenie.com/sapedi/idoc_abap.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/78/217da751ce11d189570000e829fbbd/frameset.htm
    http://www.allsaplinks.com/idoc_sample.html
    http://www.sappoint.com/abap.html
    http://help.sap.com/saphelp_erp2004/helpdata/en/dc/6b835943d711d1893e0000e8323c4f/content.htm
    http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.doc
    http://edocs.bea.com/elink/adapter/r3/userhtm/ale.htm#1008419
    http://www.netweaverguru.com/EDI/HTML/IDocBook.htm
    http://www.sapgenie.com/sapedi/index.htm
    http://www.allsaplinks.com/idoc_sample.html
    Refer this
    http://www.sapbrain.com/FAQs/TECHNICAL/SAP_ABAP_DATADICTIONARY_FAQ.html
    http://www.****************/InterviewQ/interviewQ.htm
    http://help.sap.com/saphelp_46c/helpdata/en/35/2cd77bd7705394e10000009b387c12/frameset.htm
    http://www.techinterviews.com/?p=198
    http://www.techinterviews.com/?p=326
    http://www.sap-img.com/abap/answers-to-some-abap-interview-questions.htm
    http://www.sap-img.com/abap/more-than-100-abap-interview-faqs.htm
    http://www.geekinterview.com/Interview-Questions/SAP-R-3/ABAP
    http://sap.ittoolbox.com/documents/popular-q-and-a/abap-sample-interview-questions-3240
    http://www.sap-img.com/abap/abap-interview-question.htm
    http://www.allinterview.com/Interview-Questions/ABAP.html
    links for OO ABAP.
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
    http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    http://www.allsaplinks.com/
    http://www.sap-img.com/
    http://www.sapgenie.com/
    http://help.sap.com
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com.
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.sapgenie.com/abap/controls/index.htm
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    some more materials.
    Go through the following Documents Links & Materials for ABAP Objects
    check the below links lot of info and examples r there
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.geocities.com/victorav15/sapr3/abap_ood.html
    http://www.brabandt.de/html/abap_oo.html
    Check this cool weblog:
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    /people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
    /people/sap.user72/blog/2005/05/10/a-small-tip-for-the-beginners-in-oo-abap
    /people/ravikumar.allampallam/blog/2005/02/11/abap-oo-in-action
    /people/thomas.jung3/blog/2005/09/08/oo-abap-dynpro-programming
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
    http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    http://www.allsaplinks.com/
    http://www.sap-img.com/
    http://www.sapgenie.com/
    http://help.sap.com
    http://www.sapgenie.com/abap/OO/
    http://www.sapgenie.com/abap/OO/index.htm
    http://www.sapgenie.com/abap/controls/index.htm
    http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    http://www.sapgenie.com/abap/OO/index.htm
    http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    http://www.sapgenie.com/abap/OO/
    these links
    http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
    For funtion module to class
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
    for classes
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
    for methods
    http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
    for inheritance
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
    for interfaces
    http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
    For Materials:
    1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
    2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
    3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
    4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
    5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
    6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
    7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
    8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
    1) http://www.erpgenie.com/sap/abap/OO/index.htm
    2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/09/understandingABAPObjects&
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    FOR BADI'S:
    Check this blogs 2 find a BADI:
    How to find if we have a BADI in Transaction VB02
    Re: BADI for screen enhancement in MM01  transaction
    Re: BADI and User exits
    How To Define a New BAdI Within the Enhancement Framework (Some Basics About the BAdI,BAdI Commands in ABAP,
    When to Use a BAdI?)
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
    How to implement a BAdI And How to Use a Filter
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
    Introducing Business Add-Ins
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f3202186-0601-0010-6591-b832b1a0d0de
    How to implement BAdi in Enhancement Framework
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d0456c54-0901-0010-f0b3-cd765fb99702
    Business Add-Ins
    http://help.sap.com/saphelp_47x200/helpdata/en/ee/a1d548892b11d295d60000e82de14a/frameset.htm
    BAdI: Customer-Defined Functions in the Formula Builder
    http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
    Difference Between BADI and User Exits
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    To Use BADI - Business Add In you need to Understand ABAP OO Interface Concept
    http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
    You can check the links for Step by Step Badi Implemntation
    (very helpful self learning docs).
    BADI Step by Step Implementation.
    http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
    http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
    http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
    http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
    www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
    http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e6/63ee7f486cc143a560799d8803ce29/content.htm
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/srm/badi-general+information&
    http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
    http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
    http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
    http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
    www.sapgenie.com/publications/saptips/022006%20-%20Zaidi%20BADI.pdf
    http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/04/f3683c05ea4464e10000000a114084/content.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e6/d54d3c596f0b26e10000000a11402f/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c2/eab541c5b63031e10000000a155106/frameset.htm
    The specified item was not found.
    http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
    http://support.sas.com/rnd/papers/sugi30/SAP.ppt
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
    http://members.aol.com/_ht_a/skarkada/sap/
    http://www.ct-software.com/reportpool_frame.htm
    http://www.saphelp.com/SAP_Technical.htm
    http://www.kabai.com/abaps/q.htm
    http://www.guidancetech.com/people/holland/sap/abap/
    http://www.planetsap.com/download_abap_programs.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
    http://www.allsaplinks.com/badi.html
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-serieshttps:///people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework /people/thomas.weiss/blog/2006/05/03/source-code-enhancements--part-5-of-the-series-on-the-new-enhancement-framework
    http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
    http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
    http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
    http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
    http://www.esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40921dd7-d5cf-2910-1894-bb62316afbd1
    http://help.sap.com/saphelp_erp2005/helpdata/en/73/7e7941601b1d09e10000000a155106/frameset.htm
    http://support.sas.com/rnd/papers/sugi30/SAP.ppt
    http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/abapindx.htm
    http://members.aol.com/_ht_a/skarkada/sap/
    http://www.ct-software.com/reportpool_frame.htm
    http://www.saphelp.com/SAP_Technical.htm
    http://www.kabai.com/abaps/q.htm
    http://www.guidancetech.com/people/holland/sap/abap/
    http://www.planetsap.com/download_abap_programs.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/content.htm
    /people/thomas.weiss/blog/2006/04/03/how-to-define-a-new-badi-within-the-enhancement-framework--part-3-of-the-series
    /people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
    http://esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
    http://esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
    http://esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
    http://esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
    http://esnips.com/doc/365d4c4d-9fcb-4189-85fd-866b7bf25257/customer-exits--badi.zip
    http://esnips.com/doc/3b7bbc09-c095-45a0-9e89-91f2f86ee8e9/BADI-Introduction.ppt
    http://help.sap.com//saphelp_470/helpdata/EN/eb/3e7cee940e11d295df0000e82de14a/frameset.htm
    Difference Between BADI and User Exits
    http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
    Reward Points if found helpfull..
    Cheers,
    Chandra Sekhar.

  • ABAP Objects and EJB

    Hi every one,
    Can <b>ABAP Objects and EJB</b> be compared?
    -Naveen.

    Hi Naveen,
    Check this guide- might be useful-
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/dc09af90-0201-0010-d09b-bd611a11070b
    Regards,
    Moorthy

  • Doc plz on abap object and Module pool prog

    Hi all,
    Please any send the details and use full documents on ABAP objects and Module Programming.
    Its very orgent for me
    THanks and Regards
    vamsin
    [email protected]

    Hi ALL,
    Thank you for your replies, I guess I dint convey my question properly,
    I have called a Selection-Screen in Module Pool .
    These were the steps which i followed to archive this.
    1. Created a subscreen area in your screen layout (Main Screen- Module Pool).
    2.  In the Top Include of  Module pool program declared a Selection-Screen as a subscreen.
         TOP-INCLUDE.
    SELECTION-SCREEN BEGIN OF SCREEN 400 AS SUBSCREEN.
        SELECTION-SCREEN BEGIN OF BLOCK d3 WITH FRAME TITLE text-003.
          PARAMETERS : grdate RADIOBUTTON GROUP r2  DEFAULT 'X' USER-COMMAND FR1.  " GRN date
          PARAMETERS : crdate RADIOBUTTON GROUP r2 .       " Current Date
        SELECTION-SCREEN END OF BLOCK d3.
       SELECTION-SCREEN END OF SCREEN 400.
    3.  In the PBO and PAI of the Main Screen called Subscreen.
          PBO
    CALL SUBSCREEN SUB_SCREEN_STAPLES INCLUDING 'zprogram' '0400'.
         PAI
    CALL SUBSCREEN SUB_SCREEN_STAPLES..
    I have to do certain operations when the user selects the radio button on subscreen (which is actually a Selection-Screen).
    I have tried to assign the function code  to radio button and as this screen is a Selection-Screen I cannot use PAI and PBO.
    Used the below code in TOP-INCLUDE.
    TOP-Include
    AT SELECTION-SCREEN ON RADIOBUTTON GROUP r2.
      CASE ok_rb.
        WHEN 'FR1' .
          IF crdate = 'X'.
            pdate = sy-datum.
          ELSE.
            pdate = sy-datum + 1.
          ENDIF.
      ENDCASE.
    But after executing this logic the flow is going to PAI which is validating the mandatory fields of Module-Pool Screen (which is not part of sub screen), hence not solving my purpose.
    Is there any way by which I can Only trigger the AT-Selection screen for the selection screen.
    or Any other approach which will solve my purpose.
    Thanks a lot for Suggestions and Inputs.

  • ABAP Objects with Workflows / Classes and Instances

    Hello,
    I am currently designing a workflow using an ABAP-Objects. So far I have been been able to get my Workflow to run with my class, but I have a couple of problems:
    - I am using the Function 'SAP_WAPI_START_WORKFLOW' to start other subflows, which enables me to decide which subflow to start at runtime. All of the subflows have standart importing-parameters in their containers, such as the key of my class. In each workflow I instantiate my class using a self-written method, which checks the table T_INSTANCES in my object, and then either returns the object reference to an existing instance or creates a new one. Obviously all of the subflows that I call from my main workflow should be able to find the instance. As far as I can see in their protocolls, this happens without any problems. The problem starts when I make changes to the instance. For example the changing of attributes (with setter methods) seems not to work. After the subflows are finished, in my main workflow, I do not see (with getter methods) any changes that has been made to the object. Is local persistence really limited to one workflow ?
    - My second problem is basically about the workflow container in workflow protocoll. In the same workflow, I can change the attributes of my object. Nevertheless, the protocoll always show the initial attribute, even though, my task with the getter-method returns the new value of the attribute.
    I appreciate any help and thanks a lot in advance.

    Hello Pauls,
    Thank you for your answer. I think we are misunderstanding each other. The problem occurs (I think) because my class is not a singleton class. Or am I mistaken ?
    When I directly start a subflow from my main workflow, then the instance that I have created in my main workflow is also visible to the subflow. As well as the static table which actually keeps track of the instances. So, in this case the subflows finds the instance and then can use the object as is.
    When I start a subflow from my main workflow using the function I mentioned above, then even though the same object key is used, there is a new instance. And the static table (I assume that you mean a static variable from type table, when you say "class table") is completely empty. In this case, my "new" instance is created which overwrites every attribute that I have set in the main workflow, before I started the subflow. More interestingly, my main workflow instantiates another new object, as soon as the subflow has finished. (I am using an event to wait for the subflow to finish.)
    On the other hand, I am not quite sure that I understood your approach with refresh and how it could help me. This method is not well documented anywhere, and all of the examples that I have found are about "leave it empty"
    As far as I understood, this method is called by the workflow between the steps, when an object is used. I slowly start to think that I need advanced information about Workflows and Memory Management.
    Thanks a lot again. Apparently, I am the only person who came across such a problem
    Greetz
    G.Fendoglu

  • ABAP Objects and table processing (with logical databases)

    I have a report that is written right now using procedural abap and a logical database.  The report is structured follows (high level):
    start-of-selection.
    get pernr.
      perform get_it0001 using wtab.
      perform get_it0002 using wtab.
      perform get_it0003 using wtab.
      append wtab to itab.
    end-of-selection.
      call function 'reuse_alv_grid_display'
        exporting
          i_structure_name       = 'itabstructure'
        tables
          t_outtab               = itab.
    So basically I'm going through a bunch of personnel numbers, getting a few infotypes and outputting to ALV.  I don't see where ABAP Objects is going to help me for this particular program. 
    Can somebody show me where OO ABAP would make this easier?  Does it even make sense to use OO when you're processing with a logical database?  (Not just PNP, but any logical database in general).
    Thanks in advance.

    Hello Lee
    I assume that the routines GET_ITnnnn are written by yourself. For reading infotypes ABAP Objects provides us with same very helpful classes as shown below:
    * define data
      DATA:
        gif_employee      type ref to if_pt_employee,
        go_employee       type ref to cl_pt_employee,
        gt_infotypes      TYPE tim_tmw_itlist_tab,
        go_control        TYPE REF TO if_pt_td_control,
        go_data           TYPE REF TO if_pt_td_base,
        go_pnnnn          TYPE REF TO if_pt_td_itnnnn,
        gt_p0001          TYPE TIM_P0001_TAB,
        gt_p0002          TYPE TIM_P0002_TAB,
        gt_p0003          TYPE TIM_P0003_TAB.
    start-of-selection.
    GET pernr.
    <b>* Create employee instance</b>
      gif_employee = cl_pt_employee=>get_employee( pernr ).
      go_employee ?= gif_employee.
    <b>* Get master infotypes (0001, 0002)</b>
      CALL METHOD go_employee->get_master_data
        EXPORTING
          im_begda = id_fromdate
          im_endda = id_todate
        IMPORTING
    *      EX_I0000 =
          EX_I0001 = gt_p0001
          EX_I0002 = gt_p0002
    *      EX_I0007 =
    *      EX_I0008 =
    <b>* Append all other required infotypes to itab</b>
      APPEND '0003' TO gt_infotypes.
      CALL METHOD go_employee->get_infotypes
        EXPORTING
          i_itlist      = gt_infotypes
          i_fromdate    = id_fromdate  " start date
          i_todate      = id_todate    " end date
    *      I_FILTER      =
          i_noauthcheck = 'X'
        IMPORTING
          e_result      = gt_infty_request
          e_retcd       = gd_retcd.
    * Please see documentation of parameter e_retcd...
      LOOP AT gt_infty_request INTO go_control.
        go_data = go_control->data.  <b>" get data object</b>
    *   Casting
        TRY.
            go_pnnnn ?= go_data.
          CATCH cx_sy_move_cast_error.
            CONTINUE.
        ENDTRY.
    <b>*   Convert infotype (semi-transparent -> transparent)</b>
        CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
          EXPORTING
            prelp = lo_pnnnn->prelp
          IMPORTING
            pnnnn = gs_p0003.
        APPEND gs_p0027 TO gt_p0003.
      ENDLOOP.
    The class CL_PT_EMPLOYEE provides us already with very easy access to so-called master infotypes (000, 0001, 0002, 0007 and 0008). All other infotypes can be read using method GET_INFOTYPES.
    Using these classes we have a very convenient and standardized way of accessing all kinds of infotypes.
    Regards
      Uwe

  • Abap objects and selection screen

    Hello everybody,
    I am interested in your ways of implementing selection-screens in the style of ABAP Objects.
    In earlier times (when I used to implement ABAP objects in a procedural way) I just put the selection-screen commands in an include or a form routine of my ABAP report. So it was possible to run the report in background.
    Now I read something about selection-screens/dynpros and "separation of concerns" in the book "ABAP Objects" written by Keller. He advises using function groups to encapsulate presentation from logical matters. (Selection-screen commands are in an automatically generated include now). I implemented this way. (ABAP report with a local class, which has a main method, where function module of the function group is called). It works, but i see no chance to run my report in background now.. but I need to run the report in background.
    Does anybody know a solution without deleting function group?
    What do you think is the best way of using selection-screen-commands and ABAP Objects, especially regarding running in background?
    Thx for your advise in advance.
    Kind regards,
    Anne

    Hi Naimesh,
    thx for explanation. I am not sure, if I understood everything in the right way.
    Where do you write the code for building the selection-screen? (PARAMETERS, SELECT-OPTIONS etc.)
    If you write these commands in a class method, you will get a syntax error ( because it's forbidden per definition of ABAP objects). So, am I right assuming that you put the coding just at the beginning of the ABAP report ? And after START-OF-SELECTION-event you start the processing... ?
    Furthermore, I don't really understand why you create an separate class for ALV. I found your "SAP abap help"-blog, where you explained the concept of MVC ((By the way, well done!), but you didn't mention an "ALV class" there..
    Mh.. another question - have you ever combined MVC with object services?
    At the moment I'm working on a software project where I use object services. I created 2 persistent classes via SE24 and one local class in my ABAP Report.
    I don't really see possibility to implement MVC in this project without change very much of coding and class structure...
    In my opinion the M (data&business logic) are my existing global classes and my local class is kind of Controller class?!
    Thx in advance,
    Anne

  • ABAP Objects and Upgrade

    Hi,
    I would like to discuss pro and cons of using ABAP Objects for custom development related to upgrades. For example, it seems to be an advantage to encapsulate standard functionality. Through encapsulation the calling programs do not have to care about whether or not the underlying functionality has been changed. Reuse makes it possible to adapt affected areas centrally without having to make changes in various places. However, I saw a thread in this forum regarding older ABAP Objects programming which was obsolete after an upgrade. Even if it seems good that obsolete statements are detected and can be exchanged, it is additional upgrade work which would have been avoided if the code had not been written in ABAP Objects.
    Please share you pros and cons regarding this subject.
    Thanks!

    J@Y - it's a good link to an interesting discussion.  But it's 5 years old...  ABAP Objects has moved on since then.  ( Also, (moderator hat on) please refrain from just posting links without at least giving an indication of what the links are about ).
    To the original poster.  I think it is VERY unlikely that statements that are allowed now in an OO environment will be disallowed in future.  I've been working in Objects since 46C, and have been careful to observe the warnings, and also quick to adopt the new syntax and reject the obsolete (even before it became necessary).  The only remedial work I've had to do in ten years, is on a few classes, where the constructor wasn't calling the super constructor.  And that was easily identified and remedied.
    My experience has been, in those last ten years, that properly written object oriented code leads to developments that are much easier and quicker to maintain - and therefore, a lot cheaper.  And that's the bottom line.
    matt

  • ABAP objects and AIF

    hi all
    I have a question. I have made several ABAP objects which i am using in my programs. But now i have to build a AIF with those objects, but i understand that AIF in SAP cannot retrieve objects immediately.
    Also i saw that if i want to create all kinds of internal tables and structures, it would cost me a lot of work.
    Is there a solution where i can use those objects with AIF?
    kind regards,
    Anton Pierhagen

    Hi Otto
    That was my idea. Because ABAP OO is the new type of programming in ABAP .
    So i hoped i could transfer objects from the ABAP objects to variables in the PDF layout. 
    But the only way to do this ( whiich i only see it ) is to translate the variables of the objects to values in tables and structures.
    That's not a very useful manner i would like to program my application. Because first i put everything in objects and afterwards i set everything back in tables and structures.. I had better set everything in custom structures and tables immediately. 
    So i am going to find another way. Maybe i set all the data in an HTML page and transfer this via mail and so on.
    But thanks for your reply!
    Kind regards
    Anton Pierhagen

  • ABAP Objects and Web Dynpro

    Hello everyone,
    I would like to know if it is possible to have instances of a class as a part of a controller context. You know, like if you added a service call to a BAPI or a function group, but with method calls to an object instead.
    I have a feeling, that it is uncommon to bring Web Dynpro and the object orientation of ABAP Objects together.
    For example, i don't want the event handling code of my controllers to call function groups, which in turn make calls to my object oriented model. Is there a way to skip that nasty imperative step?
    Sorry for asking questions which may sound vague or naive, I'm kind of a beginner regarding Web Dynpro and ABAP.
    cheers,
    Jens Barthel

    There's no need at all to have function modules in the way.
    You can have either controller attributes or context attributes defined as object references, and then call methods from those objects instead...
    In both cases, you just have to use TYPE REF TO instead of TYPE when defining the attributes.
    Furthermore, if you have a central class through which you interact with your OO model, you can define it as Assistance class and then you'll have an instance automatically in all the controllers...the drawback / advantage is that you do not control its instantiation which is done by the framework.
    Regards
    Edited by: Alejandro Bindi on Oct 14, 2008 6:23 PM

  • How to Implement Abap Object and Access Key for se24 developers.

    Hi every One,
    This is Abdul Rahman, Started Learning Abap Objects i want a simple program to be executed i.e. in Local class (Abap program)and as well in global class(class builder).
    Also i would like to know  When ,Were and Why Abap Object should be used.
    prob to Me :- When i wanted execute F8 a Class in se24 Class Builder it is asking me AcessKey , plz if this is required plz any one send Me.
    I have this key 36687663221261278694 it is already used in Abap editor , it is not accepting in se24 .
    plz help Me , waiting for response ..
    thankyou so much
    Abdul Rahman.

    Hello Abdul
    Here are my answers to your questions:
    (1) <b>Local classes</b>: <i>Do not use them.</i>
    - As long as your class is rather small (few attributes and methods), local classes  are ok yet as soon as they become larger you will loose the overview
    (2) <b>Global classes</b>: <i>Do use them.</i>
    - Make use of global classes even if they are only used for your training. The big advantage over local classes is that you will get used to the classe builder (SE24) which has a plethora of functions.
    (3) <b>Executing global classes</b>: <i>Can be done if you have defined an OO-transaction.</i>
    - An OO-transaction has a class and one of its public methods as parameters (similar like report transactions). When you all the OO-transaction an instance of you class is created and the public method is called.
    (4) <b>Where and Why use ABAP Objects?</b> <i>Everywhere. Anytime.</i>
    - ABAP objects is about stability, maintainability and re-usability of coding. These developer aims can be much more fulfilled using ABAP OO means than in classical programming.
    Regards
       Uwe
    PS: There are situations where local classes are quite appropriate and, using ABAP Unit testing, are obligatory.

  • Need to Learn ABAP OO and Workflow concepts.

    Hello Mates,
    I am just a 2 weeks old in Sap - ABAP, I was working on MS-.NET.
    But somehow ABAP is attracting me more than any other  language, I did certification as well.
    But somehow I am not able to understand the ABAP OO concepts inregards to workflow and exactly how to apply.
    I am reading every thread related to this from last 3 weeks now but didnt get any link/satisfactory answer to how to enhance my skill and use my OO knowledge of .NET in ABAP.
    I am very much familiar with OO concepts and dont want to read those again, but what I exactly want to read about
    1. THE SIGNIFICANCE OF OO IN ABAP.
    2. WHERE TO APPLY/ MAY BE HOW TO USE THOSE.
    3. ANYTHING RELATED TO ABAP WORKFLOW.
    if anyone used/or have knowledge of any such book/forum/blog/posts/sdn.forum/ please do let me know.
    This will help me in great level.
    Please do let me know, any kind of suggestions/critisism are welcome.
    I trust in your critisism also there will be something to read.
    Please post.
    Thanks and Regards,
    Ravindra Sonar.

    Your behavior is the only thing that counts here. And you look like a nice guy. If you would like to drop me a line in future, you can do that, I don´t mind, maybe we could find topics to talk about. And about that abap feature/ future post... I don´t care about the points (I don´t ask for any...) but the points count is the indicator of ones behavior:
    The guy, who always asks and nobody answers is selfish and not a candidate for me to answer. You must help to get helped, that is my motto. You must prove you´re worth the time and effort.
    I asked a question under B1 forum once where the top 1 contributor there tried hard to help because he knew I am active around here. That was a nice feeling. And from my point of view... get some points to prove you´re a nice guy and I will do my best to help you with any problem that may appear. I am not the only one who thinks this way, I think.
    But that is not a rule here, just my opinion.
    Maybe... one day, you will remember my words and write a blog for the beginners or help in some way to pay back what you have learnt here. Become a member of the community, spread the knowledge... and let´s talk:))
    Have a nice day, Otto

  • BPE doesn't activate XML Objects and Workflows

    Hi all.
    I have created some BPE Processes. The all are active and with status 0 in transaction SXI_CACHE.
    The odd thing is, when I trigger messenges the BPE_ADAPTER error 'No object type found for this message; check the activation of the corresponding process' pops up with a statement in the trace: 'could not create BPE proxy for message, no XML object definition found for message...'.
    I have checked the objects, the Proxies are created, what is missing are the Workflows and the XML Objects.
    When I access the the XML Object the message is a green 'Definition <XML Object Name> not available', it is created though.
    I created a similar process a month ago. This is running perfectly. The system is a 640 on SP17. How can it be that the object generation at activation is incomplete?
    Thanks in advance for your help.
    Jens

    Jens,
    I have experienced the same exception while using BPM. I tried to debug in all ways and could finally solve it.
    In case of BPM, receiver determination to be configured to set receiver as BPM. If you do mistake while configuring inbound interface (it should be abstract interface) under interface determination then you get this type of exception.
    I suggest you to to check the receiver determination and interface determination configuration again.
    Regards.

Maybe you are looking for

  • Transfer Open items and balance of one GL to new GL Account.

    Hi, I have an account which has around 10000 postings in it.However this account is not open item managed.I want to switch to Open Item Management for this account,but SAP does not allow as there are postings made to it. I searched forum for solution

  • What are Monthly Tiers/Monthly Standings?

    QuestionWhat are Monthly Tiers/Monthly Standings? Answer  Monthly Tiers/Monthly Standings keep track of a player’s Rank over time, letting players see who was able to remain consistently high on the Leaderboard. Here’s how they work: For every day yo

  • Management Software for Dell Projectors

    Good evening everybody I am new to the topic of Dell projectors and i wanted to know if there is a Management Software for projectors-models like 7609WU or 4320. I want to configure the projector remotable and not with the in-build web interface. Is

  • Seagate 160 SATA Drive & Neo-FIS2R mobo

    Everyone, I need your help for a newbie. I have installed a Seagate 160mb SATA drive as my primary bootable drive on a Neo-FIS2R mobo. I have successfully moved my partitions etc from the previous drive (80GB Seagate IDE drive). The system boots fine

  • Does Font Book or other font management come with OS 10.9?

    I have been using Suitcase Fusion and it takes forever to activate fonts, it is old and I'm reluctant to purchase the newer version especially if I'm supposed to get Font Book free with 10.9. Can I have thought on recommendations?