ABAP objects for transfer/update rules - does this apply to include stateme

I have a question about the new requirement for the code in the update/transfer rules to be written in ABAP Objects standards. Does this still apply if in your update rules you using include programs? Does this mean that when we upgrade we will have to follow the ABAP Objects standards (ie no header lines)?

Routines will method based.
In addition to what Chetan has sent, check this how to also.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6090a621-c170-2910-c1ab-d9203321ee19
Ravi Thothadri

Similar Messages

HT201270 Hello, I followed the instructions on my iPhone4s by going to Sett Gen About and nothing was new even thou I was advised to update as soon as I plugged into my Mac for a backup. Does this just mean that it tells all iPhone users to check just in

Hello All,
I followed the instructions when I plugged in my iPhone 4s to do a backup on my Mac. I was then prompted to update carrier settings by going to Settings>General>About. I did as instructed and nothing was new, even though I was advised to update as soon as I plugged into my Mac for a backup. Does this just mean that it tells all iPhone users to check for any available updates just in case ?

Updating carrier settings isn't the same as updating iOS. You don't get any new or different features. It just affects, ostensibly for the better, how your phone connects with your carrier's network.

HCM errors in phase Identify Objects for Transfer and Start Data Selection.

Hello Colleagues ,
Background: We are using TDMS HCM PA PD Expert package to transfer all of the HCM data
We are using TDMS 4.0 SP 5. We are trying to do the Configuraition in Identify Objects for Transfer and Start Data Selection.. In this phase, we are encountering the issue of 'choose to confirm to trigger data selection'. The only option in this activit is'confirm batch' and 'confirm online'. Even if we press the button, we are still encountering issues. What selections then or values can we use?Thank you. Kindly see screen shot
Regards,
Meinard

Hello Meinard,
There could be two issues:
First check if you have assigned the target ranges for the dialog user which you are using to select data from sender system. You need to maintain target ranges in activity 'Define target ranges for users' which you can find under activity "Configuration and Utilities in Control system".
Secondly, there could be authorizaton issues for the sender system user. Check for any authorization issue in SU53 in sender system for the user which you used to logon to sender system.
Thanks
Anita

My built in webcam has stopped working on Skype following an update. Does this mean my macbook air has blocked videochat on skype? How can I fix this problem?

Hi, my built in webcam has stopped working on Skype following an update. Does this mean my macbook air has blocked videochat on skype? How can I fix this problem?

See this thread:
https://discussions.apple.com/thread/5306216?tstart=0
FIX:
1. You need Time Machine
2. Go to folder /Library/CoreMediaIO/Plug-Ins/DAL/
3. Copy AppleCamera.plugin to good place (usb memory stick is the best place).
4. Go to Time machine in date that skype work fine.
5. Change AppleCamera.plugin with file from Time Machine
6. Restart system, Now skype need to work with camera.
If that doesnt pass,
Suggest looking here, much success has been found:
http://community.skype.com/t5/Mac/OS-X-10-8-5-broke-Video-on-MacBook-Air/td-p/18 91729/page/4

I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen?

I fainted and fell while holding my iPad and the screen cracked; it still works fine. It's just cracked. I feel horrible, it was a gift from my brother. have had this iPad for less than a year so it is still covered under warranties. Does this apply? If not how much to fix the screen? Please help

If you want a short list of third party repair options, here you go.
iPad Repair & Screen Replacement Services
http://www.ifixyouri.com/16-ipad-repairs
RepairZoom iPad Repair
http://www.repairzoom.com/ipad-repair.html
Mission Repair
http://www.missionrepair.com/Apple_iPad_Repair_Services_s/431.htm
iGadgetResQ
http://www.igadgetresq.com/ipad-repair/

HT4859 If I have the app turned off for storage in iCloud does this mean the app can not be downloaded to a new device?

Manage Storage.
1. What am I deleting specifically when this message appears "Are you sure you want to turn off CNN backups and delete the backup data from the cloud?
2. If I have the app turned off for storage in iCloud does this mean the app can not be downloaded to a new device?
3. If I have the app turned off for storage in iCloud and I delete the app off my phone can I download the app again or do I have to repurchase the app?

Every app that you buy or get for free in appstore/itunes belongs to you and can be downloaded on up to 10 devices or saved on up to 5 computers. Instructions to download apps to new devices here
http://support.apple.com/kb/ht2519
Here comes a "BUT" - imagine your kid playing game and getting to level 51 and have to start over from level one. Or imagine that history that you have in your CNN app. That is what icloud backup contains. My 500 scifi books are in one of the app backups and I REALLY do not want to lose it. That is what you would turn off.

I have recently had my MacBook Pro and iPad stolen so I have bought a new iPad, since syncing to my existing Apple ID account I keep getting another Apple ID popping up asking for the password. Does this mean that the owner of this appe ID have my stuff?

I have recently had my MacBook Pro and iPad stolen so I have bought a new iPad, since syncing to my existing Apple ID account I keep getting another Apple ID popping up asking for the password. Does this mean that the owner of this appe ID have my stuff?

You should change your AppleID password NOW. And if it says it was registered under another AppleID, the thief has probably done it.

Heartbleed virus/vulnerability-I have been hearing about the "heartbleed vulnerability" and told to change all my passwords. Does this apply to Macs? I thought they could not get viruses and this was one of the reasons I got one.

I have been hearing about the "heartbleed vulnerability" and told to change all my passwords. Does this apply to Macs? I thought they could not get viruses and this was one of the reasons I got one.

See What is Heartbleed?
(Fair disclosure: The Safe Mac is my site, and contains a Donate button, so I may receive compensation for providing links to The Safe Mac. Donations are not required.)

If I buy a iPad 2 in USA, will it work in the UK? If so, does this apply to both the wi-fi

If I buy a iPad 2 in USA, will it work in the UK? If so, does this apply to both the wi-fi

It will work in the UK, though you will need a plug adapter for the charger (you don't need a convertor for the charger).
If you get a 3G version then get the AT&T version as they use micro-sim cards, so you can swap in a UK micro-sim card. The Verizon iPad is CDMA based and doesn't use micro-sim cards, so from a built-in 3G point of view isn't much use in the UK (I'm not aware of any CDMA carriers in Europe).

Why FAN is only supported for Exalogic platform? Is this intended to include it in x86 platform?

Why FAN is only supported for Exalogic platform? Is this intended to include it in x86 platform?

Hi,
FAN support along with all of the RAC support enhancements in Tuxedo 12.1.3 are licensed as part of the Exalogic Elastic Cloud Software which is included with Exalogic and SuperCluster systems.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

HT1725 Does this apply to Apple TV?

iTunes: How to resume interrupted iTunes Store downloads
Does this apply to Apple TV?

Welcome to the Apple community.
It doesn't apply exactly as stated on your Apple TV. However you can re-download purchased content (only available in some locations) on the Apple TV by going to the purchased section of the appropriate feature (TV shows etc)

IN BW UCCHECK transaction for Unicode does not list Transfer/Update rules

Hi All,
We are going to update our BW system to install Enhancement Package 1 SP 7 on our BW 7.0 and we are going also to convert our data base to Unicode.
We used the UCCKECK Transaction to have a list of the abap programs to be modified before the u201Cconversionu201D procedure.
But the transaction does not list the abap code included into transfer rules, update rules and start routines.
Have you an idea to recover them?
And do you think the conversion procedure will abort if these kinds of routines are not adjusted or they will go in error at runtime?
Do you have experienced this problem?
Thanks a lot.
Antonella

Hi Nils, sorry for delay in replyu2026
Unfortunately we started to develop our routines in BW2.0 and checking some of them we receive the error u201CIn Unicode programs, the "-" character cannot appear in names, as it does here in the name "W-DATE" u201Du2026
And further more in subsequent BW releases the same error is only a u201Cwarningu201D into a NON Unicode system.
So I think we should check and correct all our routines before the Unicode conversion.
My best regards, Antonella

ABAP Guidelines for transfer rules & Update rules

Is there any guidelines for abap when using it for transfer rules and update rules? I am looking for some best practise in this area.
Thank you,

There is no specific differences in the standards/coding procedure for Transfer Vs. Update Rulse.
This can only come from a combination of requirement, design and experience! (in no particular order)
for e.g.
If the converions are the same for all data targets, you would use the transfer routine, start routine in the Transfer rules.
If the converions are different for different data targets, you would use the update routine, start routine in the Update rules.
Key concerns being performance, modularization, reduced effort and ease of maintenance.
Not sure I have answered you question! Please get back if there is something specific you are interesed in (a scenario perhaps!)
Rishi

Abap Code help in update rule

Hi Gurus,
I have a requiement, that is if there are 5 line items with in a document and each one has diffeerent tax jurisdiction code, then we should be showing only one tax jurisdiction code for a document. Line items are not displayed in report. The condition to pick up tax jurisdiction code is the one which has least ending zeros among all the lime items with in a document.
Supppose
Doc1 Item Tax Jurisdiction code
1800000002 1 CNQC00000000000
1800000002 2 CNQC00000000000
1800000002 3 CN0000000000000
1800000002 4 CNQC00000000000
1800000002 5 TXJOHNCLEBUR000
So here the value of Tax Jurisdiction code is TXJOHNCLEBUR000 as it has least ending zeros compared to other values with in a document.
Any help how to use the string function and acheive the desired result.
Thanks,
Raj.

Hi Anand,
Thanks for the reply. we don't expect any non-zeros after seeing first zero. Now i have added another z object which will contain only least zeros for a doc. What I am doing is now after loading the data into the cube from ods i am doing loop back and updating the new z object. Below is the code I am trying to do
TABLES: /BIC/AZFGLO10100.
Defining an internal table as ods table****
Types: BEGIN OF ITAB_01,
doc_no LIKE /BIC/AZFGLO10100-AC_DOC_NO,
item_no LIKE /BIC/AZFGLO10100-ITEM_NUM,
taxjur LIKE /BIC/AZFGLO10100-TAXJURCODE,
length like num, ***** this will hold the length of the zeros
END OF ITAB_01.
loading the data from active ods table into defined internal table*****
select AC_DOC_NO ITEM_NUM TAXJURCODE from /BIC/AZFGLO10100 into table
Itab_01 where AC_DOC_NO = /BIC/AZFGLO10100-AC_DOC_NO and
item_num = /BIC/AZFGLO10100-ITEM_NUM.
sort itab_01 doc_no item_no
now I want to use code too populate the vlaue of length field in internal table (which shows how many zeros a tax jurisdiction code has for every corresponding line item)
then in the update rule of z tax jurisdiction i will wirte a routine such that
select taxjur into result from itab_01 where doc_no = COMM_STRUCTURE-doc_no and length = min(length).
now I have one more doubt , the number of items in a document will be varying so how to takecare of this...
If possible can you please provide me with the abap code that you have mentioned in earlier post.
Any more help on this is really appreciated.
Thanks,
Raj

Need hints to bring BC400(ABAP) knowledge to BW update rules/routines.

Hi,
I have just completed the BC400 (ABAP) course at SAP but the instructor had no clue about BW.
From se80, he thought how to create packages, programs, functions modules, classes/Interfaces, etc. but whenever, I asked how these fit into the BW update rules and transfer rules, he said he knew nothing about BW.
For example, how do I bring in a program written in se80 into my update rule or transfer routine which updates and ODS or cube?
i.e. The main reasoning for learning this BC400(ABAP) is to be comfortable in writing update rule or transfer routine to update ODS/Cubes in BW but the instructor failed me in making the link between the ABAP class and BW.
Can you give me some guide on this?
Can I work in se80 as I was taught and bring codes from there to update a cube?
i.e. if I need to write an update routine to update a cube from an ODS, can this be done in se80 (on BW)
I will appreciate any guidelines to bring in my new found knowledge to the BW environment.
Thanks

Most Bw transformations are already includes inside programs or cmods or BTEs
By double cliking on start routines and end routines it already takes you into the ABAP enviroment
Have a look at the sappress book - user exits and BADIs in BW (it's not a brillaitn book by any means - it's just about passable and is short on detail - but it will get you a head start)

ABAP objects for transfer/update rules - does this apply to include stateme

Similar Messages

Maybe you are looking for