Abap Prog Scenario

Dear,
Need Help regarding ... Abap program ...
What We are try to do is " our vendor will email us to some email address.
Email will contain some parameters in pre-defined format. Now.
Program will take those parameters and then execute the Report according to given parameters in email and send back report to that Vendor.
I am beginner in ABAP . need help regarding this issue. any Ideas? Suggestion recommendation ?
Regards

Hi!!!
Thanks for ur prompt helps. Actually instead of OBJECTID I was passing the Obj-key and not the OBJECTID. This was creating problem. But still dont know why it was creating the prob.
Anyways THANKS A LOT.
Regards,
Sudipto.

Similar Messages

FTP to ABAP Proxy Scenario - getting error CO_TXT_CHANNEL_PASSWORD_ERROR

We have transported PI and EP data from development server to respective production, every thing is running fine except the abap proxy scenarios i.e. PI reads file from ftp location and calls the abap proxy but we are getting following errors:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="OUTBINDING">CO_TXT_CHANNEL_PASSWORD_ERROR</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Unable to read user password from communication channel of type Error when accessing the secure store (access ID = FD768D4A8772DB50E1000000AC10041E) Error while reading from the secure store: ERROR_UNKNOWN: Cannot find entry in secure store (SECSTORE,023)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Any solution?
Please note that I have searched and applied solutions given on SDN forums but didn't get any success. So I am looking for new suggestions.
Regards,
Jawed Ali

Jawed ,
Please test the HTTP destination of your receiver comm channel.
Which is the RFC connection to your R3 system.
Transaction SM59 and check the logon parameter for the connection you are using.
Regards,

Issue in Iodc- abap proxy scenario

Hi all
I have a idoc to abap proxy scenario. The issue is ,
when we send the idoc to client A of target system, it works ifne.
But when we send the saem mesage to Client B, we find a error message in sxmb_moni of Target system. the mesage is Application_fault.
Is it because of any error in XI configuration or somethin else.

hi all
thanks for all your responses.
I forgot to mention that based on a particualr field value in the idoc , it will be routed to eihter Client 100 or 200 .
I gave the conditions in Receiver Determination.
Same Server Proxy is used in both the target business sytems.
I have done all the Configuration Steps ,( Created two separate business systems also )
Also I have checked wiht all the system settings to be made in the target system B.
When i trigger the idoc to Client 100, it goes to XI and then reaches Client 100 of System B
without any problem. I get the desired result from proxy code.
When i send the saem idoc to Client 200, it reaches the target system and routed to client 200. But getting this error message in
the Call Inbound PRoxy step. (from sxmb_moni)
<SAP:Category>Application</SAP:Category>
<SAP:Code area="ABAP">APPLICATION_ERROR</SAP:Code>
Since it reaches the target system correctly, i guess there is nothing wrong in the XI configuration side.
But if its Application fault, how come the same data is processed successfully in one client whereas it thorws error in another.

File to ABAP Proxy Scenario

Hi All,
I am doing File-to-ABAP Proxy Scenario, in the sender side side it is picking the file, but in sxmb_moni it is giving the error:
*<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>*
*- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">DUPLICATE_DETECTED</SAP:Code>
<SAP:P1>4CFF4691EEE211DC85E30019D1522982</SAP:P1>
<SAP:P2>CENTRAL</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Message ID 4CFF4691EEE211DC85E30019D1522982 already exists in called system (pipeline CENTRAL)</SAP:Stack>
<SAP:Retry>N</SAP:Retry>
</SAP:Error>
Can u plz tell me why this error is occurring and how we can resolve this error.
Thanks & Regards,
Vikas

Hi Vikas
make a dummy change and activate your object then make a full refresh
you can make it through in 3 ways
1) tcode SXI_CACHE
2) go to ID -> environment and make a full cache refresh
3) http://<host>:5<sys#>00/CPACache/refresh?mode=full Full CPA cache refresh
when you do the developement then these are stored in ABAP data dictionary table which can be refreshed by delta cache
while full cache will delete this temporary object and make this cahe into runtime
hope this will help you
thanks
sandeep
if helpful reward points

INTERNAL - AMF_ERROR in XML -- ABAP proxy scenario

Hi Experts,
Can any one help me to solve this following issue please, it is happening while I am executing the scenario between XML File to ABAP Proxy scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AMF_ERROR</SAP:Code>
<SAP:P1>1</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error when processing message number 1 in package No object type found for the message. Check that the corresponding process is activated An exception has occurred.</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>.
This XML message has got 5 Lines Header and more than 100 Lin Items, this kind of Header and Lin item message 3 to 4 in one XML, I am using multi mapping. Message mapping shows working fine, OM also shows working fine. BPM is splitting messages to send messages to ABAP Proxy on SNC 7.0. After I have done all with SDN experts support, still I am having the above issue. can any one experties might help to resolve this?
I will appreciate your support.
Thanks & Regards
San

Can you please explain the solution.
Regards,
Rashi

HTMLError in sxmb_moni, Idoc to ABAP Proxy Scenario

Hi Friends
I am trying to send data from R3 to SCMTM system(SAP System), via Idoc to ABAP Proxy Scenario ,I am getting the following under HTMLError in sxmb_moni
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
<SAP:P1>400</SAP:P1>
<SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
<SAP:P3>(See attachment HTMLError for details)</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED) (See attachment HTMLError for details)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Any ideas will be helpful.

Hi,
I faced similar problem. it was due to configuration problem in SXMB_ADM. corss check specific server confiration in SXMB_ADM.
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Regards,
Reyaz

Creation of package structure for ABAP proxy scenario

Hi All,
I have a doubt on package structure used for ABAP proxy scenario. What is the specific reason to create a four level package structure? Can some one please explain? Thanks in advance.
Regards,
Sudheer.

Hi Sudheer,
Can you pls clarify what do you mean by 'four level package structure' ?
Are you referring to the ABAP structures that get created during creating the proxy by SPROXY transaction ? These structures get automatically created. We simply have to write the code using these structures.
Or do you mean the 'package' which is mandatory to create a transportable ABAP object ? i.e. transport from Development to Staging and then Production.
Regards,

Configure ABAP Proxy scenario in PI7.3

Hello Experts,
Can someone please let me know if we have somewhere step by step procedure to configure an ABAP Proxy scenario in PI7.3, I couldn't find How-to guide related to this on SDN.
Thanks a lot.
Best Regards,
Shweta

I dont know abt your installation whether you have java stack alone or both java stack and abap stack.
AAE or local processing:
You can do using soap adapter as transport protocol and message protocol as XI for proxy. This way you can use local processing using AAE. I dont see documents in SDN as of now. But it is pretty simple. Just follow the steps what I mentioned.
Classical processing or abap engine:
Still the same as previous versions.

ABAP proxy scenario file - PI7.1- ECC NO_MAPPINGPROGRAM_FOUND

Hello Experts,
I have ABAP proxy scenario file -> PI7.1->ECC . I am getting an error for communication between PI and ECC system. the error is NO_MAPPINGPROGRAM_FOUND and pointing to operation mapping in the software component.
What i found in TCODE SXMB_MONI is 2 adaptor call one from one below the other out of which one is in error.
Also when a file is passed from the file server to the SAP PI I see 2 entries in SXMB_MONI for the same Payload one from source system to target system and one from target system to source system ( ie. from business component as sender and ECC as receiver system and one entry for ECC system as receiver and business system for file as receiver ) is this how it should be
one more thing i would like to specify is that my service interface is Point to point enabled . Is it happening because of that
Request you help on urgent basics
BR Heth

Hi,
1. in PI, by hazard, your Service Interface (SI) does not the mode "synchronous"?
2. or does this SI was declared firstly with "synchronous" mode and the proxy generated with this mode, and then you decided to put "Asynchronous"... without to regenerate the proxy in ECC?
If it's the case, in ECC, select your SI, do a right-click and regenarete the proxy.
3. for the 2nd message (returned by ECC to PI), have you seen the Payload content and SOAP Header?
Could you please also check the Pipeline (e.g CENTRAL, CENTRAL_BACK) ?
4. In SXMB_MONI of ECC, how many messages have you: one ? or two ?
Regards
Mickael

User Roles & Authorization to run 'WebDynpro ABAP Application scenarios'

Hi All,
I am developer and my user ID is having developer roles, so when i am testing
'WebDynpro ABAP Application scenarios' it is working fine.
Problem is when I am executing with enduser portal WWID's (i.e. WWID's are also defined as sap
user), 'WebDynpro ABAP Application scenarios' giving me dump in screen & in ST22.
Pls guide me what roles or authorization we need to assign to user ID's
who can use 'WebDynpro ABAP Application scenarios'.
URL for Webdynpro application is like : https://xxxx.yyyy.zzzz:/sap/bc/webdynpro/sap/ZPA_EXTENSION_U?ZDATA=10028705591320090406
ST22 Error when testing with portal WWID's
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED_NO
Exception              CX_SY_REF_IS_INITIAL
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_WD_ADOBE_SERVICES==========CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
     caught in
    procedure "PARSE_XML_SCHEMA" "(METHOD)", nor was it propagated by a RAISING
     clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component.
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
Explorer screen error
Error when processing your request
What has happened?
The URL https://xxxx.yyyy.zzzz:/sap/bc/webdynpro/sap/ZPA_EXTENSION_U/ was
not called due to an error.
Note
The following error text was processed in the system QJ1 : Access via 'NULL' object reference not
possible.
The error occurred on the application server sapqj1ci_QJ1_78 and in the work process 21 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: PARSE_XML_SCHEMA of program CL_WD_ADOBE_SERVICES==========CP
Method: GET_SCHEMA_VERSION of program CL_WD_ADOBE_SERVICES==========CP
Method: CONSTRUCTOR of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Thx

Please refer to thread [Authorization Error|WDA adobe error] where various solution to the problem specified by you are described.
Regards
Rohit Chowdhary
Edited by: Rohit Chowdhary on Apr 7, 2009 9:41 PM

Error while usinjg the JDBC to ABAP Proxy Scenario

Hello Rocks,
This is my scenario like JDBC --- Pi --- ABAP Proxy
while i am given a sender side jdbc XSD structure is like this
VWENTITYAGGREMENT
Row             1-unbound occurence
      POOL_ID   0-1 occurence
      CUST_ID
      AGREEMENT
       PRODUCT_ID
        CONTRACT_TYPE
        CONTRACT_TYPE_DESCR
        AGRMNT_STATUS
        STATUS_DESCR
          EFFDT
         TERMINATION_DT
         ADD_DT
         ADD_TM
while i am writing a select query in Sender JDBC CC is like this
SELECT POOL_ID,CUST_ID,AGREEMENT,PRODUCT_ID,CONTRACT_TYPE,CONTRACT_TYPE_DESCR,AGRMNT_STATUS,STATUS_DESCR,EFFDT,TERMINATION_DT,ADD_DT,ADD_TM FROM vwEntityAgreement.
Here i am getting this Error message like this :
Error Description: Database-level error reported by JDBC driver while executing statement 'SELECT POOL_ID,CUST_ID,AGREEMENT,PRODUCT_ID,CONTRACT_TYPE,CONTRACT_TYPE_DESCR,AGRMNT_STATUS,STATUS_DESCR,EFFDT,TERMINATION_DT,ADD_DT,ADD_TM FROM vwEntityAgreement'. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid column name 'POOL_ID'.'. For details, contact your database server vendor.
So please give me your valuable inputs !
Regards,
Ravi.

Invalid column name 'POOL_ID'.'. For details, contact your database server vendor.
Did you confirmed the name POOL_ID as suggested?
Why is the tablename different (check the case) in the query that you make and in the XSD structure that you mentioned......check if this is causing the problem.
Regards,
Abhishek.
Edited by: abhishek salvi on Jun 4, 2010 10:24 AM

How to use a standard service available in SOAP to ABAP proxy scenario?

Hello Experts,
My scenario is SOAP to ABAP proxy wherein I have to send Sales Order from Third party TC to SAP.
Third Party->SOAP Adapter->PI 7.1->ABAP Proxy->ECC.
I have seen a standard service available at the following URL.
http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DEE98D07DF9FA9F1B3C7001A64D3F462&id=13A904EA0E8711DC5A11000F20FCB6A9.
Can I use the above web service for my current scenario? If yes, please explain how?
Thanks & Regards
Nidhi

Third Party--->SOAP Adapter--->PI 7.1--->ABAP Proxy--->ECC
I am actually looking for using standard webservice that has been provided by SAP in ESWorKSPACE available on sdn.
The WS that you mentioned is inbound and hence wont suit your requirement!
The reverse flow may however be possible.
Create Sales Order_V2
synchronous inbound service operation
Regards,
Abhishek.

XI protocol error occurred in abap proxy scenario- plz

Scenario is asynchronous
Http -> XI ->R/3(abap server proxy)
sender: Through http client
receiver is abap server proxy
Repository objects:
Sender: sender_DT, sender_MT, sender_MI(outbound asynchronous)
Receiver: imported RFC from R/3 client 550, receiver_MI(which has message type refered to the imported RFC)
Interface mapping: source=sender_MI, receiver_MI.
Proxy generated on R/3 client 550 for receiver_MI.
Configuartion objects:
Sender: business service, no comm channel since http sender.
receiver: R/3 business system
Comm channel: receiver_cc type of XI.
transport protocol: http
message protocol : XI 3.0, since both XI and R/3 on webas 6.4
addressing type: URL
target host: diamond
service number: 8005
path: /sap/xi/engine?type=entry
Authentiction data:
user name: user22
passwrod; correct
logon client: 400 which is the same client I developed ll the design and config objects.
Recevr determinaion, interface determination and recevr agrrement looks fine.
The error iam getting is:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIProtocol</SAP:Category>
<SAP:Code area="MESSAGE">LOOP_IN_MESSAGE_ROUTING</SAP:Code>
<SAP:P1>is.05.diamond</SAP:P1>
<SAP:P2>IS</SAP:P2>
<SAP:P3>XI</SAP:P3>
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>XI protocol error occurred</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Please reply , your help is appreciated.
Thanks
KK

Stefan thanks,
I tried as you suggesetd putting the info of R/3 for
server: diamond
port: 8005
client: 550
user id: user05
pwd: correct
But I get the below error, suggest me what permission should this userid have?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText><!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN"><html><head><title>Logon Error

File to Abap Proxy Scenario : No message log in SXMB_MONI

I have a PI Scenario in which a FTP server is polled every 5 minutes, and when it receives any file, file is archieved and abap proxy is called. Few days back it was running perfectly fine. But For last couple of days I am facing strange error.
My File is archived but abap proxy isnot called, neither I get any message in SXMB_MONI.
any guesses what should I do?
Jawed Ali

Hi Jawed,
HOLD means you have given QoS as EOIO in sender channel and the first message got failed and hence all messages are waiting..
Check this thread
Re: PI 7.1 Messages stuck into the Queue of the Adapter Engine
Try resending the messages through runtime workbench->message monitoring->adapter engine
Regards
Suraj

JDBC to ABAP Proxy Scenario

Hello SDN Rocks,
Here my scenario is JDBC to Pi to ABAP Proxy
Here internally RFC is trigering under proxy side.
Data is going to pi Box sucessfully but Pi to ECC side is not going it seems like <?xml version="1.0" encoding="UTF-8" ?>
- <ns1:Z_ZOTC_AGRMNT_DATA_VIA_001 xmlns:ns1="urn:sap-com:document:sap:rfc:functions">
<AGRMNT_TAB />
</ns1:Z_ZOTC_AGRMNT_DATA_VIA_001> Empty Blank structure is coming like this no data is coming under thisAGRMNT_TAB tab.
Please give me the Inputs from your end
Regards,
Ravi.

Hello Friend ,
under abap proxy method my rfc will be triggering.
I think you got my point.
Regards,
Ravi.

Abap Prog Scenario

Similar Messages

Maybe you are looking for