ABAP-Programming for SAP BW u0096 User-Exits und BAdIs
Hi experts,
i am a novice und looking for informations about Badi and User-exits for BW .
i want to learn how to programm extractors.
Can you you help me by giving me some informations or documents or sap links where i can find informations?
Cheers
Dear Mr Herzog,
Congratulations for the book: Abap Developement for SAP Netweaver BI: User exits and BadIs.
We're trying to implement the suggestions on the chapter 5.1.1 Interface of function module EXIT_SAPLRSR0_001 (page 136), however, we're having problens with the abap sintax CALL_FUNCTION l_d_name IF FOUND.
The command IF FOUND is not accepted.
It'll be very helpful to avoid issues on tranporting include zxrsru01.
I appreciate any additional help on how to implement it.
Best Rgs
Eliseo Bouzan
Similar Messages
-
User Exit OR Badi for MK01 transaction (used for saving vendor amster data)
Hi All,
I have a requirement where I have to call my workflow, when we create the Vendor using my custom transaction (ZMK01, which is a copy of standard transaction MK01).
For Workflow triggering I am using FM 'SAP_WAPI_CREATE_EVENT' in the user exit 'EXIT_SAPMF02K_001' but this is only for checking the data on saving Vendor Master.
So I want to use FM 'SAP_WAPI_CREATE_EVENT' at right place. For that , I need User-Exit or BADI which is used for saving vendor master data.
Could anyone please help me to find out the user exit or BADI for save event of vendor master data using transaction MK01.
Looking forward to your advise and thanks in advance.
Best Regards,
MamtaHi ,
I forgot to activiate the project linked with User exit 'EXIT_SAPMF02K_001' .
so problem is solved now
Thanks,
Mamta -
Abap code for sap exit variables?
Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.Please tell how u solved ur issue i have the same scenario to be do.
-
ABAP Code for SAP exit varaibles?
Hi,
i) Where can I find the abap code for SAP exit variables
OP_KEYDT used for the net due date
OP_KEYD2 used for the posting date
OP_KEYD3 used for the clearing date, which are used in FI AR aging report(0FIAR_C03).
Based on the Net Due Date, which is key date(0NETDUEDATE), entered by the user at runtime, the posting date and celaring date are populated.
II) The problem is we want to simulate a similar scenario, but with key date, which user enters is based on the custom Net Due Date(ZNETDUEDATE).And this date is populated to posting date and clearing date variables.
How do we acheive that.
Thanks.Hi Kumar,
Try this below mentioned example where default date is current date.
Step1: Create a variable(ex: cur_date) on requrired characteristic with Processing type "Customer Eixt" and check the check box for ready for input(if this variable need in selection screen).
Step 2: Goto T Code : CMOD and provide appropriate Project and choose components and click on display.
Step3: Double click on exit "EXIT_SAPLRRS0_001" you can see include "ZXRSRU01", double click on include.
Step4: Sample code to populate.
WHEN 'CUR_DATE'.
Data : l_p_range_SSS TYPE rrrangesid.
IF I_STEP = 1.
l_p_range_SSS-Low = sy-datum.
l_p_range_SSS-Sign = 'I'.
l_p_range_SSS-Opt = 'EQ'.
APPEND l_p_range_SSS TO e_t_range.
Endif.
The following values are valid for I_STEP:
· I_STEP = 1
Call up takes place directly before variable entry
· I_STEP = 2
Call up takes place directly after variable entry. This step is only started up when the same variable could not be filled at I_STEP=1.
· I_STEP = 3
In this call up, you can check the values of the variables. Triggering an exception (RAISE) causes the variable screen to appear once more. Afterwards, I_STEP=2 is also called up again.
· I_STEP = 0
The enhancement is not called from the variable screen. The call up can come from the authorization check or from the Monitor.
Also, refer this link..
http://help.sap.com/saphelp_bw320/helpdata/en/1d/ca10d858c2e949ba4a152c44f8128a/content.htm
Cheers,
Allen -
User Exits or BADIs for MM41/42 in SAP Version 4.6b
My requirment is that when the user create a new article by MM41 or changes an existing one by MM42. Certain checks shoud be applied.
Checks required are:-
1)Articles should always have their Unit of Dimension as MM(other dimensions should not be accepted )
2)Articles should always have the volume unit as CCM(other volume units should not be accepted )
3)EAN numbers should be present only for Alternative Unit of Measures EA and OUT.
4) The dimensions (Length, Width and Height) should always be double digits (should be more than or equal to 10)
I want to know by which User Exit or BADI (in SAP Version 4.6.b) can this be achieved.
Its very URGENT..Please help.
Many Thanks
AbhiUSER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - MM41 Create Material &
Exit Name Description
MGW00001 Material Master (Retail): Additional Data
MGW00002 Material Master (Retail): Number Assignment
No of Exits: 2
Transaction Code - MM42 Change Material &
Exit Name Description
MGW00001 Material Master (Retail): Additional Data
MGW00002 Material Master (Retail): Number Assignment
No of Exits: 2
Rewards if useful.........
Minal -
User exit or BADI available for the CAPP in CA03.
Hi,
I have a requirement to populate the standard CAPP values to the work center activities of the routing only when all the activities are having a blank value.Please see the below paragraph for better understanding.
Currently in SAP when executing CAPP for a work center of the routing it over writes the existing values populated on the routing for the setup,labor,standard labor,man occupation,machine occupation etc whether the values are blank or not. An enhancement needs to be made to only populate operations standards when all the values are blank.
If routing is not populated with setup, machine, labor standards, man occupation, machine occupation and work center is setup for default standards in CAPP, then run the CAPP process to apply standards from work center zcappstds table. The program that is run to apply these standards currently is SAPLCETO. Potentially ca96 and the batch process that updates the material master RCPMAU01 will have to be adjusted as well.
Please help me if anybody knows the user exit/Badi for this requirement.Please reply me soon this is an urgent requirement
thanks in advance,
Samyuktha.I dont have details abt exact user Exit or badi which will suit ur requirement. But below info will give you the way to find out the same.
Have a look at below link,
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
Best Regards,
Vibha
*Please mark all the helpful answers -
USER EXIT or BADI for Vendor field in MIRO
Hi Experts,
In MIRO transaction vendor field gets defaulted from Purchase Order. So my requirement is to changes that vendor with alternate payee.
To <u>replace the vendor with alternate payee</u> I need the <b>USER EXIT or BADI</b>, kindly help me on this will be useful for us.
Thanks in Advance.
SAP ConsultantTransaction Code - MIGO Goods Movement
Exit Name Description
MBCF0002 Customer function exit: Segment text in material do
MBCF0005 Material document item for goods receipt/issue slip
MBCF0006 Customer function for WBS element
MBCF0007 Customer function exit: Updating a reservation
MBCF0009 Filling the storage location field
MBCF0010 Customer exit: Create reservation BAPI_RESERVATION_
MBCF0011 Read from RESB and RKPF for print list in MB26
MB_CF001 Customer Function Exit in the Case of Updating a Ma
No of Exits: 8
BAPI-step by step procedure
http://www.sapgenie.com/abap/bapi/example.htm
list of all BAPI's
http://www.planetsap.com/LIST_ALL_BAPIs.htm
Rewards if useful.................
Minal -
User Exit or Badi for CN60 transaction
Hi
Can anyone tell me the user exits or Badis for Tcode CN60.
i need to Include the Comments field for the activities from CN22.soi would like to know is there any userexit for CN60.
Thanks
SowjanyaHi Sowjanya
u can find BADI's in different ways...
1>First go to any transaction->iN THE menu bar SYSTEM->STATUS->Get the program name ->double click->u will go to the program attached to the tcode.Now search term will be CALL CL_EXITHANDLER.Now u will get list of BADI'S available..
2>Goto SE24->Give class name as CL_EXITHANDLER->Display->double click on get_instance mathod->Now u will go inside the method->Now put break point on the cl_exithandler.Now go to any transaction code and pass dat..U will see that it will be stopped on the break point which u set on the cl_exithandler...In the exit name u can find list of badi's attached to the tcode..
There are multiple ways of searching for BADI.
Finding BADI Using CL_EXITHANDLER=>GET_INSTANCE
Finding BADI Using SQL Trace (TCODE-ST05).
Finding BADI Using Repository Information System (TCODE- SE84).
1. Go to the Transaction, for which we want to find the BADI, take the example of Transaction VD02. Click on System->Status. Double click on the program name. Once inside the program search for CL_EXITHANDLER=>GET_INSTANCE.
Make sure the radio button In main program is checked. A list of all the programs with call to the BADIs will be listed.
The export parameter EXIT_NAME for the method GET_INSTANCE of class CL_EXITHANDLER will have the user exit assigned to it. The changing parameter INSTANCE will have the interface assigned to it. Double click on the method to enter the source code.Definition of Instance would give you the Interface name.
2. Start transaction ST05 (Performance Analysis).
Set flag field "Buffer trace"
Remark: We need to trace also the buffer calls, because BADI database tables are buffered. (Especially view V_EXT_IMP and V_EXT_ACT)
Push the button "Activate Trace". Start transaction VA02 in a new GUI session. Go back to the Performance trace session.
Push the button "Deactivate Trace".
Push the button "Display Trace".
The popup screen "Set Restrictions for Displaying Trace" appears.
Now, filter the trace on Objects:
V_EXT_IMP
V_EXT_ACT
Push button "Multiple selections" button behind field Objects
Fill: V_EXT_IMP and V_EXT_ACT
All the interface class names of view V_EXT_IMP start with IF_EX_. This is the standard SAP prefix for BADI class interfaces. The BADI name is after the IF_EX_.
So the BADI name of IF_EX_CUSTOMER_ADD_DATA is CUSTOMER_ADD_DATA
3. Go to Maintain Transaction (TCODE- SE93).
Enter the Transaction VD02 for which you want to find BADI.
Click on the Display push buttons.
Get the Package Name. (Package VS in this case)
Go to TCode: SE84->Enhancements->Business Add-inns->Definition
Enter the Package Name and Execute.
Here you get a list of all the Enhancement BADIs for the given package MB.
The simplese way for finding BADI is
1. chooes Tcode Program & package for that Tcode.
2. Go to Tcode se18
3. Press F4
4. search by package or by program.
reward points to all helpful answers
kiran.M -
User exit or BADI for VL01N and VL02N
Hi Experts,
My requirment is while creating and changing delivery, change inco terms of delivery when some condition satisfy. can you any one tell me any user exit or badi , i will write the logic to change inco terms based some condition.
Regards
Jayasundercreate the following program in $tmp.. execute it . you will get all the user exits and BADIs.
*& Report Z_FIND_EXIT_TRANS
report z_find_exit_trans.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
**& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
**& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode.
selection-screen skip.
selection-screen end of block a01.
**& Start of main program
start-of-selection.
*Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
*Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
*Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
*Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen. -
User exit or badi for me52n transaction.
Hi all,
i have a requirement to write a user exit or badi for me52n transaction. the requirement is in header section, only one plant should be accepted. that is in the first row one plant will be inserted. in the second row if we are inserting another plant other the first row plant, it should not accept it and it should raise an error.
that is from the second row onwards, every plant should match with the first row plant.
if any part of this issue is unclear, plz let me know so that i can explain it clearly
this is urgent requirement.
please let me know the solution as soon as possible.
points will be awarded.
thanking u in advance.
A.srinivas.In this version exit EXIT_SAPLMEREQ_005 should exists (look at OSS <a href="https://service.sap.com/sap/support/notes/843446">Note 843446 - MEREQ001: Cannot call up external service data in user exit</a> this note refers to the exit and is applicable in 4.70. Look also at OSS <a href="https://service.sap.com/sap/support/notes/310154">Note 310154 - ME21N/ME51N: Customer-specific check, generating error log</a>
Regards -
User exit or BADI for recruitment
Hi,
I am new to HCM, can you give me user exit or badi for recruitment.
Requirement - i have developed an infotype which i am updating through BSP, while the custom infotype is updated it should simultaneously update some of my Z tables. Hoping for positve replies earliest.
Thanks in advance:-
SantoshHi,
<b>Infotype</b>The data fields of HR master data, time management and recruitment are grouped logically into information types or infotypes for short.
Examples of infotypes are "Family/Related Person", "Organizational Assignment, "Basic Pay".
The following naming conventions apply to infotypes:
Infotypes 0000 to 0999 are used for HR master data
and sometimes for applicant data
Infotypes 1000 - 1999 for organizational management
Infotypes 2000 - 2999 for time data
Infotypes 4000 - 4999 for applicant data
Infotypes 9000 - 9999 for customers
<b>Function character of step</b>
This controls for which types of processing (create, change and/or delete a data record) a dynamic action should be carried out.
The processing type is indicated by a two-digit numeric value. These values can be added up; in other words, you can enter several processing types for each infotype, subtype or field. A dynamic action can also be carried out independent of the current processing type.
00 for Independent of the current function carried out
02 for Change
04 for Create
06 for Change and create
08 for Delete
10 for Change and delete
12 for Create and delete
Examples
If you enter 06, an action is carried out if the specified infotype was created or changed.
If you enter 00, an action is carried out irrespective of whether the specified infotype was created, changed or deleted.
<b>Variable function part</b>
The variable function part, which depends on the indicator for step, can have the following meaning:
<b>P - Plausibility checks</b>
You can enter values for specific infotype fields. Field names must be entered in full. Literals and constants can serve as comparison values. These must be enclosed by inverted commas. Variables can also be used.
The old value of a field can be used for comparison; the field name must be preceded by PSAVE-.
If fields of other infotypes are used for comparison, these must be stored in the module pool of the current infotype.
The following comparison operators are supported:
= equal to,
< less than,
<= less than or equal to,
> greater than
>= greater than or equal to and
<> not equal to.
Consecutive checks must be linked by a logical AND. Logical OR links must also be indicated by a /X.
Note:
Note that all checks with OR links must have a /X.
If the result of the comparison operation is not "true", then the following commands (I, F, W etc.) are skipped over until a field is reached or a new comparison operation takes place.
Examples
Infotype Field ..... Ind. Variable function part
0007 STAT3 P P0007-STAT3='0'
0007 STAT3 P PSAVE-STAT3='1'
The step is taken if the value in the P0007-STAT3 field changes from 1 to 0.
0007 P P0013-KLKZ1<>'0'/X
0007 P P0013-ALVKZ<>'0'/X
0007 P P0013-RVKZ1<>'0'/X
0007 P P0013-RVNUM=SPACE
The first three conditions are linked by an OR; at least one of these conditions must be met. Condition 4 must always be met.
The step is taken if the following holds true:
P0013-KVKZ1 not equal to 0 or P0013-ALVKZ not equal to 0 or P0013-RVKZ1 not equal to 0, and P0013-RVNUM empty.
<b>I - Maintain infotype record</b>
Enter the step, infotype, subtype, object ID, start and end dates of the record and an indicator which defines whether the step is to be run in the background. The possible actions are INS, COP, MOD, and DEL.
Use commas to separate selection criteria just like the separator in the matchcode. If an entry is missing, the system inserts a comma.
Separate the indicator for suppressing dialog from other entries by a slash D (/D).
Constants, such as those for subtypes, are not enclosed in inverted commas.
Variable entries are also permitted. Fields containing such values must be put in brackets.
Examples:
Infotype Field .... Ind. Variable function part
.... I INS,19,01/D
Step: Create a Dates record, subtype 01, run in the background
.... I DEL,14,M559
Step: Delete Rec. Payments/Deds. record with subtype (wage type) M559.
0007 .... I INS,8,,,(P0007-BEGDA),(P0007-ENDDA)
Step: Create a Basic Pay record (0008) without subtype and object ID. The start and end dates are the same as those in the current Planned Working Time record (0007); specify these two fields only if they are filled because the dynamic action was triggered by this infotype.
<b>W - Default values for new record</b>
Literals or variables are used as default values.
Set the defaults for the infotype, subtype, object ID, start and end dates using an I step and not a W step.
Do not set defaults for Q fields of an infotype because the values for these fields are derived from the corresponding P fields.
Examples
Infotype Subtype ..... FC Ind. Variable function part
0021 2 04 I INS,0015,M430
0021 2 04 W P0015-BETRG='10000'
When a Family/Related Person record (0021) record with subtype 2 (child) is created, an Additional Payments record (0015) with a default amount of 100.00 is created.
<b>V - Cross-reference to another step</b>
Here, you can combine fields to groups. The variable function part contains the value in the field which follows the "field" column. Steps which are specified only for the following field are also triggered for each of the other fields.
Examples
Infotype Field ..... FC Ind. Variable function part
0016 PRBZH 06 V PRBZT
0016 PRBZT 06 I DEL,0019,01/D
Infotype 0019, subtype 01 is deleted in the background when the field PRBZT or PRBZH in infotype 0016 is changed or created (function code 06).
The following entries are equivalent:
0016 PRBZH 06 I DEL,0019,01/D
0016 PRBZT 06 I DEL,0019,01/D
<b>F - Call a routine</b>
You can call internal (module pool) as well as external routines.
If you call external routines, type the program name in brackets after the routine name. Do not specify 'using' parameters. When calling an external routine, all data must be declared in a common part. You can use the fields of structure RP50D to return values from the routine. These are not used in the standard system and can only be populated via the routine and then can be used for defaults (W-Commands).
This allows customer-specific routines to be formulated with all the above steps.
Example 1:
Infotype Field ..... Ind. Var.function part
0016 PRBZT F PROBATION
0016 PRBZT I INS,19,01
0016 PRBZT W P0019-VTRMN=PRBEND
Module pool MP001600 contains the PROBATION routine. This routine uses the entries in the fields P0016-PRBZT and P0016-PRBEH to determine the end of the probation period which it stores in the field PRBEND.
The system creates a new 'Dates' record with the reminder date = PRBEND.
Example 2:
Infotyp ..... Ind. Var. function part
0001 F GET_DATE(ZPUDYN01)
0001 I INS,19,01
0001 W P0019-VTRMN=RP50D-DATE1
The GET_DATE routine in program ZPUDYN01 calculates a date and enters this date in the RP50D-DATE1 field via "TABLES RP50D" in ZPUDYN01. This date can be user-defined in GET_DATE: if necessary, user-defined infotypes can be read afterwards.
<b>M - Send a mail</b>
Enter the name of the feature which defines the characteristics of the mail.
Example
Infotype Field ..... Ind. Var.function part
0001 SACHP M M0001
A mail is sent when the field SACHP is changed. The characteristics of the mail are defined in feature M0001.
In the standard system, feature M0001 is provided as a model. The documentation on feature M0001 explains how to define the characteristics of a mail.
<b>ADDITIONAL HINTS</b>
If you use a date as a constant, enter it as YYYYMMDD (YYYY=year, MM=month, DD=day).
The table strings T001P, T503 and PSPAR are filled with the values which are valid on the record start date.
The old values of the infotype are stored in the field string PSAVE. The structure of this string is the same as the Pnnnn structure (nnnn=infotype). The structure is filled with (valid) values only when the delete, change and create functions are used.
Please read Create dynamic actions in the Implementation Guide.
Regards
Bernd -
User Exit Or Badi for Framework Release PO
Anyone could tell me about any user exit or BADI for storing the calculated value in Frameork order.
Since it is storing the GNETW in CEKKO and that is used in releasing procedure.
First of all i want to calculate the total price according to srat date and end date and then only for framework order put that value in CEKKO-KTWRT field.
Please Help and suggest some thing about this.
Thanks & Regards,
Nitin MalhotraHi,
Check the following PDF .
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9cd334f3-0a01-0010-d884-f56120039915
May be useful to you.
Regards
Sachin -
User Exit or BADI for IW31 when Saving the Service Order
Dear ABAPers,
I would like to add one more line in Service order item when saving the Service order in (IW31) at runtime.Is there User Exit or BAdI.It is very Urgent Please help me.
Thanks & Regards,
Ashok.Hi
U can go through the tansaction.
System/ Status
Double click on program name.
For badis:
Search for the Phrase:
cl_exithandler=>get_instance.
U will the badi definitions.
For User exits:
search for the phrase: CALL CUSTOMER-FUNCTION
u will get the user exits.
If it is helpful rewards points.
Regards
Pratap.M -
User-exits or BAdI for transaction VL10B
Hello everybody,
I have to modify an outbound order during its creation from a purchase order in transaction VL10B. The modification is to update the serial numbers and the batch.
As the process is in background it is quite difficult to debug the process plus the problem that in this project I cannot modify the user-exits / badi just for testing. (they have implemented 'special' rules for these kind of modifications)
Does anybody know any user-exit or BAdI where I can update these serial numbers in this transaction VL10B?
Thanks in advanceHi,
Check [ABAP Ninja|http://www.abapninja.org/] it may help you will the search.
Regards
Marcin -
User-Exit or Badi for dangerous goods - master data
Is there any user-exit or BADI we can use while changing or saving dangerous goods?
We want to do a copy on other dangerous goods immediately after the change or creation of the dangerous goods master data.
But I can't find an user-exit which can be used before the changes are saved.
Can anybody help?
Thanks!Hi,
Please check SAP enhancement DG100001
You can use this SAP enhancement to define a customer exit to write change documents for dangerous goods master data and packaging data.
The customer exit is in the function group XD10. It is called from the function DG10_CHANGE_DOC_USER_EXIT.
If the system does not find a customer exit, a standard document description is called. This is stored in the include LDG1NU03
Hope this will solve your problem
Regards,
Keshav
Maybe you are looking for
-
Mac mini (Mid 2010) Internet issues
Hi everyone! I recently replaced three older Mac minis with new Mac mini (Mid 2010) computers. The new computers all work well, but they each exhibit the same problem wherein Java and Flash content on certain sites will fail to run properly. The prob
-
What is the safest way to recover erased files
what is the safest way to recover erased files
-
I don't know how to access my varification email?
Ive been looking for a answer for almost a year because i kept putting it off because i was unable to work it out my problem is ive tried to download apps and it says i need to verify my email so i tried to figure out where to look and to no avail so
-
Apache HTTP Server Plug-In for HPUX
First action: Installation of BEA Weblogic Server 6.1 Servicepack 4 Apache Webserver Version 2.0.43 gcc 3.0.2 on HP-UX hansapp4 B.11.11 U 9000/800 Apache Webserver can be started ! Aditional Action: Installation of BEA's Apache HTTP Server Plug-In as
-
MFE v 2.10 how to updat for N86 8MP
Greetings from Sydney, I have a N86 8MP with software updated to v20.115 installed. Mail for Exchange (MFE) is showing as v 2.1.0. (from about) I have tried to update via the applications tab and nothing is available. With v2.1.0 I do not have the o