Abap proxy 2 soap

Hi,
this scenario is abap proxy 2 soap ,, , source system send some data to target webservice and target webservice return approval number.
I checked target url and soap action in receiver soap adapter, and those value is correct.
on sxmb_moni
i got NO_MAPPINGPROGRAM_FOUND
http://test.test.com/pt/ses001/approvalprocess SES001_IM does not exist in runtime cache</SAP:Stack>
and Applicatoin Error
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--  Request Message Mapping
  -->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
  <SAP:Category>Application</SAP:Category>
  <SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
  <SAP:P1 />
  <SAP:P2 />
  <SAP:P3 />
  <SAP:P4 />
  <SAP:AdditionalText>application fault</SAP:AdditionalText>
  <SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
  <SAP:Stack />
  <SAP:Retry>M</SAP:Retry>
  </SAP:Error>
here is Sent message log on MDT.
2006-08-29 13:25:37 Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
2006-08-29 13:25:37 Success SOAP: response message leaving the adapter
2006-08-29 13:25:37 Success Application attempting to send an XI message asynchronously using connection AFW.
2006-08-29 13:25:37 Success Trying to put the message into the send queue.
2006-08-29 13:25:37 Success The response message for message 44f23177-e6ed-0270-0000-000046028211(INBOUND) was successfully transmitted to the calling application.
2006-08-29 13:25:37 Success The message status set to DLVD.
2006-08-29 13:25:37 Success The application sent the message asynchronously using connection AFW. Returning to application.
here is Receive message log on MDT.
2006-08-29 13:25:37 Success The message was successfully received by the messaging system. Profile: XI URL: http://xi0034:50000/MessagingSystem/receive/AFW/XI
2006-08-29 13:25:37 Success Using connection AFW. Trying to put the message into the request queue.
2006-08-29 13:25:37 Success Message successfully put into the queue.
2006-08-29 13:25:37 Success The message was successfully retrieved from the request queue.
2006-08-29 13:25:37 Success The message status set to DLNG.
2006-08-29 13:25:37 Success Delivering to channel: R_TEST_SOAP_SSS001
2006-08-29 13:25:37 Success SOAP: request message entering the adapter
2006-08-29 13:25:37 Success SOAP: completed the processing
2006-08-29 13:25:37 Success SOAP: response message received 6bc3e4d0-3716-11db-a265-00145e483080
2006-08-29 13:25:37 Error SOAP: response message contains an error Application/UNKNOWN/APPLICATION_ERROR - application fault
i can see source data on sxmb_moni.
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:APPROVALREQ_SES_MT xmlns:nr1="http://test.test.com/pt/ses001/approvalprocess">
  <TITLE>46</TITLE>
  <GUBUN />
  <REQUESTOR>46</REQUESTOR>
  <TEXTLINE>SAFSAFSAFDSAF</TEXTLINE>
  </nr1:APPROVALREQ_SES_MT>
request message mapping of request
  <?xml version="1.0" encoding="UTF-8" ?>
- <ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws">
  <args1>46</args1>
  <args2>46</args2>
  </ns1:ApprovalRequest>
I can not see any return value comming from target webservice on sxmb_moni.
request message mapping error on response
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--  Request Message Mapping
  -->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
  <SAP:Category>Application</SAP:Category>
  <SAP:Code area="UNKNOWN">APPLICATION_ERROR</SAP:Code>
  <SAP:P1 />
  <SAP:P2 />
  <SAP:P3 />
  <SAP:P4 />
  <SAP:AdditionalText>application fault</SAP:AdditionalText>
  <SAP:ApplicationFaultMessage namespace="http://xml.apache.org/axis/">hostname</SAP:ApplicationFaultMessage>
  <SAP:Stack />
  <SAP:Retry>M</SAP:Retry>
  </SAP:Error>
payload of request message mapping of response
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!--  Request Message Mapping
  -->
  <ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">ibmr52</ns2:hostname>
please check what was my fault.
thanks
venjamin

Hi Bhavesh.
thanks for the note.,,
please look at the bottom of this content.
i can not see  "Method=Approval" between jws and args1 even though i set SOAP Action = Approval on Receiver SOAP Adapter.
is this happening something wrong? or is it normal log?
<?xml version="1.0" encoding="UTF-8"?>
<ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws"><args1>333</args1><args2>333</args2></ns1:ApprovalRequest>
SAP_512dbe91-372d-11db-b291-00145e483080_END
here is detail message log on MDT.
--SAP_512dbe91-372d-11db-b291-00145e483080_END
Content-ID: <[email protected]>
Content-Disposition: attachment;filename="[email protected]"
Content-Type: text/xml; charset=utf-8
Content-Description: SOAP
<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'><SOAP:Header>
<sap:Main xmlns:sap='http://sap.com/xi/XI/Message/30' versionMajor='3' versionMinor='0' SOAP:mustUnderstand='1' xmlns:wsu='http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' wsu:Id='wsuid-main-92ABE13F5C59AB7FE10000000A1551F7'>
<sap:MessageClass>ApplicationMessage</sap:MessageClass>
<sap:ProcessingMode>synchronous</sap:ProcessingMode>
<sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId>
<sap:TimeSent>2006-08-29T07:10:08Z</sap:TimeSent><sap:Sender><sap:Party agency='' scheme=''></sap:Party>
<sap:Service>BS_SAPR3_SSS0017</sap:Service></sap:Sender><sap:Receiver>
<sap:Party agency='' scheme=''></sap:Party><sap:Service>BS_MMM_D</sap:Service></sap:Receiver>
<sap:Interface namespace='http://sds.samsung.co.kr/pt/sessingle001/approvalprocess'>APPROVALREQ_MMM_IB</sap:Interface>
</sap:Main><sap:ReliableMessaging xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
<sap:QualityOfService>BestEffort</sap:QualityOfService></sap:ReliableMessaging>
<sap:Diagnostic xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
<sap:TraceLevel>Information</sap:TraceLevel><sap:Logging>Off</sap:Logging></sap:Diagnostic><sap:HopList xmlns:sap='http://sap.com/xi/XI/Message/30' SOAP:mustUnderstand='1'>
<sap:Hop timeStamp='2006-08-29T07:10:08Z' wasRead='false'><sap:Engine type='BS'>BS_SAPR3_SSS0017</sap:Engine>
<sap:Adapter namespace='http://sap.com/xi/XI/System'>XI</sap:Adapter><sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId><sap:Info>3.0</sap:Info></sap:Hop>
<sap:Hop timeStamp='2006-08-29T07:09:06Z' wasRead='false'>
<sap:Engine type='IS'>is.00.xi0034</sap:Engine>
<sap:Adapter namespace='http://sap.com/xi/XI/System'>XI</sap:Adapter>
<sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId><sap:Info>3.0</sap:Info></sap:Hop><sap:Hop timeStamp='2006-08-29T07:09:08Z' wasRead='false'>
<sap:Engine type='AE'>af.sxd.xi0034</sap:Engine><sap:Adapter namespace='http://sap.com/xi/XI/System'>XIRA</sap:Adapter>
<sap:MessageId>44f23fa9-e6ed-0270-0000-000046028211</sap:MessageId></sap:Hop></sap:HopList></SOAP:Header><SOAP:Body>
<sap:Manifest xmlns:sap='http://sap.com/xi/XI/Message/30' xmlns:xlink='http://www.w3.org/1999/xlink' xmlns:wsu='http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd' wsu:Id='wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7'/></SOAP:Body></SOAP:Envelope>
--SAP_512dbe91-372d-11db-b291-00145e483080_END
content-id: [email protected]
content-type: application/xml
<?xml version="1.0" encoding="UTF-8"?>
<ns1:ApprovalRequest xmlns:ns1="http://70.2.207.241:8080/axis/ApprovalService.jws"><args1>333</args1><args2>333</args2></ns1:ApprovalRequest>
SAP_512dbe91-372d-11db-b291-00145e483080_END
thanks
venjamin
Message was edited by: venjamin

Similar Messages

  • ABAP Proxy to SOAP - Logon to Web Application Server Required

    Hello XI Experts,
    I have set up an ABAP Proxy->SOAP example in my IDES system. Everything is working correctly.
    However, when I execute the program which makes the call to the method "EXECUTE_SYNCHRONOUS", a popup appears asking me to enter logon details to the web application server.
    Where do I set the logon information such that this popup no longer appears?
    Thanks in advance,
    NW.

    Hi Nicholas !
    Check this thread:
    ABAP Proxy configuration
    I think it has useful tips about what you should check.
    Regards,
    Matias
    ps: please award points if helpful

  • SAP PI 7.4 SOAP - ABAP Proxy Synchronous Webservice

    Hi Everyone,
    I am developing the following scenario:
    3rd party makes a SOAP call to SAP (via PI) to determine whether a vendor exists or not in the SAP system. The link for the call is provided by us from the Integrated Configuration.
    The request comes in, calls an ABAP Proxy to check if a vendor exists and sends a response back to the SOAP call with a 'Y' or an 'N'.
    I've read a lot about various scenarios but I'm having trouble connecting the dots as I'm fairly new to PI. I'd appreciate any help.
    I've made the following set-up based on assuming I need separate Service Interfaces for the SOAP Request & Proxy Response
    ESR
    1. Message Types
         SOAP (MT_SOAP_REQ & MT_SOAP_RESP) - PROXY (MT_PRXY_REQ & MT_PRXY_REQ)
    2.  Message Mappings
         MM_REQUEST    which maps MT_SOAP_REQ   to  MT_PRXY_REQ)
         MM_RESPONSE which maps MT_PRXY_RESP   to MT_SOAP_RESP)
    3. Service Interfaces (Synchronous)
        (SOAP Request)
        SI_IN (Inbound Interface)       with Request = MT_SOAP_REQ and Response = MT_SOAP_RESP
       (Proxy Response)
        SI_OUT (Outbound Interface) with Request = MT_PRXY_REQ and Response  = MT_PRXY_RESP 
    4. Operation Mapping
        OM_LOOKUP which maps SI_IN to SI_OUT with Request    (MT_SOAP_REQ  to MT_PRXY_REQ)
                                                                        and  Response (MT_SOAP_RESP to MT_PRXY_RESP)
    I create the ABAP Proxies for each Service Interface. SI_IN contains the required coded method to check if there is a vendor.
    I create the webservice and binding for SI_IN in SOAMANAGER
    At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation)  to get the response.
    ID
    In the Integration Directory I've created a SOAP_SENDER communication channel for System A and SOAP_RECEIVER channel for SAP.  For the SOAP Receiver I need to specify a URL - what should this be ? Is it meant to point to the web service for SI_IN in SICF or just to the generic http://host:8000/sap/xi/engine?type=entry 
    Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
    I created an Integrated Configuration for the SI_IN Service Interface with comm channel SOAP_SENDER from System A and SOAP_RECEIVER for SAP backend.  I then got the WSDL for this to provide to the 3rd Party to test (via SOAP UI)  . Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
    I appreciate you taking the time to go through this .  Any help is greatly appreciated.
    Thanks very much
    Gary

    I create the webservice and binding for SI_IN in SOAMANAGER
    At this point I'm somewhat unsure - what do I need to do for SI_OUT ? Do I need to create a logical port ? how is SI_OUT associated to SI_IN (apart from the Operation)  to get the response.
    >>>>No need to do anything in SOAMANAGER
    Do I need to use the HTTP_AAE adapter for the receiver instead of SOAP ?
    >>> No. Soap adapter is fine. Configure your receiver channel as explianed in the below blog (section 4.3)
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70066f78-7794-2c10-2e8c-cb967cef407b?overridelayout=t…
    Again my concern is how is the SI_IN linked to the SI_OUT to achieve the response ?
    >>>>Your receiver determination and interface determination takes care of this.(receiver interface  & outbound processing tabs in ICo)

  • Error while invoking the ABAP Proxy via SOAP Adapter

    Hi,
    My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
    SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
    Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
    SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
    With this approach, i am encountering the below error message
    2009-05-29 12:17:55 Error Adapter Framework caught exception: null
    2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
    Any ideas on the above errror message? Any pointers or inputs will be appreciated.
    Thanks,
    Vinayak Kamath

    > 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
    > 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
    This is a generic error message which does not have any information about the error which has occurred.
    Do you see any error messages in the SOAP client?
    Regards
    Stefan

  • ABAP proxy exception to SOAP fault and vice versa not getting mapped

    Hi there,
    I have these scenario's: ABAP proxy to SOAP (AXIS framework) and the other way around, synchronous, using AAE.
    When declaring the Synchronous Service interfaces we also defined error message types in order to pass system and application exceptions back to the service consumers.
    The behavior we are observing is as follows;
    When an exception is generated on the ABAP proxy, the error message type is correct generated and filled with the corresponding values in the ABAP proxy runtime. However, when the response arrives at the service consumer, it only contains a SOAP fault filled with some kind of generic PI mapping exception information.
    1. Why is the original ABAP proxy exception not mapped/passed into the SOAP response?
    2. What can we do in order to change that situation?
    3. Does it has to do with the use of the AAE - Advanced Adapter Engine or the AXIS framework?
    PS: We have performed a test of the Operation Mapping - OM using the ABAP exception as input and it did work correctly, so the error structure seems to be Ok.
    Many thanks for your replies.
    Edited by: Roberto Viana on Jul 26, 2010 8:30 PM

    Problem was caused by some differences in namespaces between source and target.

  • ABAP Proxy without SOAP adapter in PI7.3

    Hi All,
    We have dual stack implementation of PI7.3 but we do not wish to use the SOAP adapter for configuring an ABAP proxy scenario.
    Is this possible? Is the Javastack only configuration in NW Admin available for use in dual stack implementation also?
    Thanks and Regards,
    Diptee

    Hi All,
    So it essetially means that only the below 2 options are available for ABAP proxy scenarios in PI7.3 for a ABAP+Javastack installation
    - use of SOAP adapter over XI protocol
    - use of conventional proxy configuration of the ABAP Integration Server
    And the only Javastack config cannot be used for a dual stack implementation.
    Please confirm if above is correct.
    Regards,
    Diptee
    Edited by: diptee s on Sep 21, 2011 4:48 PM

  • SOAP error in synchronous scenario for ABAP Proxy with Oracle D/B

    Dear Experts,
    I am working in Sender ABAP Proxy <====>SAP PI 7.31 JAVA only <====> Oracle Database. My proxy configuration are working successfully.
    Apart from that, I have maintained a SOAP sender communication channel under the ECC business system with
    Transport Protocol as HTTP
    Message Protocol as XI 3.0
    Adapter Engine as Central Engine
    When I am testing from ECC at Tx SPROXY, I am receiving following error.
    com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.xi.routing.RoutingException: InterfaceDetermination did not yield any actual interface at com.sap.aii.adapter.soap.web.SOAPHandler.processSOAPtoXMB(SOAPHandler.java:746) at com.sap.aii.adapter.soap.web.MessageServlet.doPost(MessageServlet.java:505) at javax.servlet.http.HttpServlet.service(HttpServlet.java:754) at javax.servlet.http.HttpServlet.service(HttpServlet.java:847) at
    1. In XI3.0 protocol, I can not select BE but when selected HTTP 1.0 as Message protocol then I can find the BE.
    2. No Response message is shown in ECC when testing the message.
    3. How do Receiver JDBC adapter for Oracle Database is configured 
    4. What would be Message Protocol for Oracle Database i.e. XML SQL Format or Native SQL format for Select operation.
    Please guide.. All your inputs will be appreciated......
    Regards
    Rebecca

    Dear Indrajit,
    Appreciate your inputs.. Yes I have configured all the ABAP proxy configurations and there no question of missing any thing as Tx SLDCHECK in ECC is working perfectly fine.
    But still to go, some of the queries needs more input.
    1.In ID, i have created a Sender SOAP communication channel with listed details.
    Transport Protocol as HTTP
    Message Protocol as XI 3.0
    Adapter Engine as Central Engine
    Is there any parameters which I may be missing from Module tab of Synchronous SOAP Cc ?
    2. In the Cc monitoring, the JDBC receiver status shows "Database operation successfully completed" but I could not find any response data from database. The Message monitoring should have 2 messages for 1 trigger, but I could find only 1 message by SOAP only?
    Sorry to bother experts...Please answer in sequence...
    Regards
    Rebecca

  • ABAP-Proxy to SOAP: Error in SOAP Adapter

    Hi!
    I would like to implement ABAP-Proxy to SOAP scenario.
    Unfortunately my SOAP receiver channnel has the following error:
    SOAP: call failed: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: No SOAP Envelope but 1 definitions; HTTP 200 OK: java.io.IOException: No SOAP Envelope but 1 definitions; HTTP 200 OK
    Furthermore the call of  /sap/bc/soap/rfc of business system B is erroneous
    http://<server system B>:8000/sap/bc/soap/rfc
    Here I get the error: HTTP 500 Internal Server error
    Can some one help me to solve this problem?
    Thank you very much!
    regards
    Holger

    Hi,
    Are you using the webservice exposed by SAP or it is third party webservice. Can you explain your complete scenario? What is the url you have given in your receiver SOAP Channel? Was that no configured earlier?
    If at all you are using the SAP webservice, the wsdl link should be.
    http://<server>:<http port>/sap/bc/soap/wsdl11?services=BAPI_MATERIAL_EXISTENCECHECK&sap-client=200
    The target url you will be able to see in the wsdl itself also
    amit

  • How to use a standard service available in SOAP to ABAP proxy scenario?

    Hello Experts,
    My scenario is SOAP to ABAP proxy wherein I have to send Sales Order from Third party TC to SAP.
    Third Party->SOAP Adapter->PI 7.1->ABAP Proxy->ECC.
    I have seen a standard service available at the following URL.
    http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?packageid=DEE98D07DF9FA9F1B3C7001A64D3F462&id=13A904EA0E8711DC5A11000F20FCB6A9.
    Can I use the above web service for my current scenario? If yes, please explain how?
    Thanks & Regards
    Nidhi

    Third Party--->SOAP Adapter--->PI 7.1--->ABAP Proxy--->ECC
    I am actually looking for using standard webservice that has been provided by SAP in ESWorKSPACE available on sdn.
    The WS that you mentioned is inbound and hence wont suit your requirement!
    The reverse flow may however be possible.
    Create Sales Order_V2
    synchronous inbound service operation
    Regards,
    Abhishek.

  • Consume web service in ABAP proxy with SOAP header

    Hi Thomas ,
    I am trying to consume web service in  ABAP . I have followed the procedure from one of your web blog <a href="/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap a Developer's Journal Part XIV - Consuming WebServices with ABAP</a> . (640 release).
    I need to pass SOAP header along with SOAP body. As you mentioned I have used if_wsprotocol_ws_header interface to pass header but it is still failing.
    Please see below code and please give some direction to fix the issue.
    1.Create ABAP proxy for WSDL (http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL). It has created structures only for SOAP body.
    2.Create Logical port
    3.Create following program to call proxy
    REPORT  zproxy.
    DATA: ref_stock TYPE REF TO zzco_stock_quotes_soap ,
          ws_header TYPE REF TO if_wsprotocol_ws_header,
          name TYPE string,
          namespace TYPE string.
    TRY.
        CREATE OBJECT ref_stock
      get WS_HEADER protocol
        ws_header ?= ref_stock->get_protocol('IF_WSPROTOCOL_WS_HEADER').
      set somehow header as iXML-DOM tree
        DATA: ixml TYPE REF TO if_ixml,
              xml_document TYPE REF TO if_ixml_document,
              xml_root TYPE REF TO if_ixml_element,
              xml_element TYPE REF TO if_ixml_element,
              xml_node TYPE REF TO if_ixml_node.
        DATA l_xstring        TYPE xstring.
        DATA l_string         TYPE string.
        FIELD-SYMBOLS <fs_xstring> TYPE xstring.
      Additional Header:
        CONCATENATE
    '<soap:Header>'
    '<s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">'
    '<s1:RegisteredUser>'
    '<s1:UserID>[email protected]</s1:UserID>'
    '<s1:Password>aaaaaaaa</s1:Password>'
    '</s1:RegisteredUser></s1:LicenseInfo>'
    '</soap:Header>' INTO l_string.
      convert to xstring
        l_xstring = cl_proxy_service=>cstring2xstring( l_string ).
        IF NOT l_string IS INITIAL.
        create iXML DOM document from XML xstring
          CALL FUNCTION 'SDIXML_XML_TO_DOM'
            EXPORTING
              xml           = l_xstring
            IMPORTING
              document      = xml_document
            EXCEPTIONS
              invalid_input = 1
              OTHERS        = 2.
          IF sy-subrc = 0 AND NOT xml_document IS INITIAL.
            xml_root = xml_document->get_root_element( ).
            xml_element ?= xml_root->get_first_child( ).
          add header element by element to SOAP header
            WHILE NOT xml_element IS INITIAL.
              name = xml_element->get_name( ).
              namespace = 'http://swanandmokashi.com' . "xml_element->get_namespace_uri( ).
              IF NOT xml_element IS INITIAL.
              ENDIF.
              ws_header->set_request_header(
                          name = name
                          namespace = namespace
                          dom = xml_element ).
              xml_element ?= xml_element->get_next( ).
            ENDWHILE.
          ENDIF.
        ENDIF.
      CATCH cx_ai_system_fault .
    ENDTRY.
    *Call soap body using abap proxy class.
    DATA: get_quotes TYPE zzget_quotes_soap_out .
    DATA: get_quotes1 TYPE zzget_quotes_soap_in .
    get_quotes1-quote_ticker = 'GE'.
    TRY.
        CALL METHOD ref_stock->get_stock_quotes
          EXPORTING
            get_quotes1 = get_quotes1
          IMPORTING
            get_quotes  = get_quotes.
      CATCH cx_ai_system_fault .
      CATCH cx_ai_application_fault .
    ENDTRY.
    4.It is throwing cx_ai_system_fault error.
    SOAP details:
    Input:
    <?xml version="1.0" encoding="utf-8"?>
    <soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:enc="http://schemas.xmlsoap.org/soap/encoding" >
    <soap:Header>
    <s1:LicenseInfo xmlns:s1="http://ws.strikeiron.com">
    <s1:RegisteredUser>
    <s1:UserID>[email protected]</s1:UserID>
    <s1:Password>aaaaaaaa</s1:Password>
    </s1:RegisteredUser>
    </s1:LicenseInfo>
    </soap:Header>
    <soap:Body>
    <tns:GetQuotes xmlns:tns="http://swanandmokashi.com">
    <tns:QuoteTicker>GE</tns:QuoteTicker>
    </tns:GetQuotes>
    </soap:Body>
    </soap:Envelope>
    Thanks,
    Kavitha.

    Hi ,
    Thank you for the response. Did you passed user email and password ([email protected] /aaaaaaaa) part of licenseinfo->resisteredUser along with Quoteticker GE in analyzer?
    <a href="http://www.strikeiron.com/Analyzer/OnlineAnalyzer.aspx?WSDL=http://ws.strikeiron.com/SwanandMokashi/StockQuotes?WSDL">ANALYZER</a>
    Thanks,
    Kavitha.

  • Soap to abap proxy

    Hi,gurus:
        I wanna to configure a scenario about soap to abap proxy,do you have any step by step configurations about that?Any help will be appreciated!

    Sender SOAP Adapter
    Receiver RFC/IDOC/ABAP proxies.
    IR
    Step 1:
    Create the Sender/Receiver Datatypes for Request & Response
    step2:
    Create the MT for Req & Res
    Step3 :
    Create OB Message Interface ( Syncronous) /IB Message Interface( Synchronous)
    step5 :
    Request Mapping : Sender Req MT--> REcv Req
    Response Mapping : Recv Res----->Sender Res MT
    Step6:
    Interface Mapping
    ID
    Step1 :
    Configure Sender Soap Adapter
    Step2 :
    Configure Receiver XI  Adapter
    Step 3: Configure Sender Agreement, receiver determination,Interface determination,Receiver agreement
    Step 4:
    Create WSDL file.( ID->tools-Defien webservice)
    save the file as .wsdl file
    Give the file to sender system
    SAP System
    Step 1:
    Goto Sproxy T.code -> select IB interface -. Right click create object ,it will automatically create aproxy class.
    Step2 ;
    write an ABAp program to send the data to class.
    Below weblog helps in wrting  ABAP program
    File to R/3 via ABAP Proxy
    Regards,
    Jayasimha

  • SOAP to Abap Proxy with attachment

    Hi Experts,
    i am facing one problem while developing one interface from SOAP to ABAP Proxy with attachment.
    the sender system is sending empty soap message but with all its content in the attachment.
    we need to parse the attachment and send the data to ECC system through proxy.
    we made some research on SDN and found out that in sender soap adapter PayloadSwapBean is not supported.
    however in receiver XI adapter the module tab is not editable.
    could you suggest any solution to handle this interface?
    thanks in advance.

    Hi Aditya,
    Can you just try to  use SOAP with Servlet(Axis) protocol, since standard SOAP sender does not allow modules to be used.
    please refer http://help.sap.com/saphelp_nw04/helpdata/en/45/a39e244b030063e10000000a11466f/frameset.htm
    The first attachment is put in the main payload; further attachments become attachments of the XI message.
    http://help.sap.com/saphelp_nw70/helpdata/EN/45/a4f8bbdfdc0d36e10000000a114a6b/frameset.htm
    Regards,
    Srinivas

  • Error in synchronous( abap proxy to soap)scenario

    Hi experts,
    My scenario is synchronous abap proxy to sysnchronous soap. for proxy I am using business system name as ERDCLNT220 and soap business system name as BS_HRS_DEV
    configuration steps are
    1. only client proxy to soap scenario I have done.
    communication channels: only receiver soap adapter. no proxy sender communication channel for client proxy.
    Already we have RFC destination connection and connection type H for proxy to xi.
    1.Is it required RFC destination connection for xi to server proxy.
    2.Is it required receiver proxy communication channel for server proxy?.
    i HAVE TESTED THIS INTERFACE. I am able to send the request. But I am not able to receive the response from soap webservice message .
    error is:
    SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    exception caught with cause com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    Error Adapter Framework caught exception: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson
    Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: SOAP: response message contains an error XIAdapter/PARSING/ADAPTER.SOAP_EXCEPTION - soap fault: Exception occurred while trying to invoke service method getPerson. Setting message to status failed.
    Kindly help me.
    advance thanks
    thanks and regards
    elton
    Edited by: eltonsaranya on May 9, 2011 10:27 AM

    Your exception message shows problem at the webservice side.
    Check the following:
    a) you need two mappings one for proxy req to soap request and other soap response to proxy response
    b) You need to create service interfaces both sender and receiver synchronous .
    c) communication channel  QOS is best effort for both sender and receiver
    d) I dont see problem in soap configuration. Bcuz you are able to ping and while getting response from the method getPerson it fails.
    f) See your SOAP response structure matches with WSDL provided.
    g) You can also test outside PI.. I meant testing via soap client tool like SOAPUI  for that web service. So that you know whether problem exists on the target system or not.
    Hope that helps.

  • "SOAP:Fault" in scenario with ABAP proxy client

    Hello,
    I realized the scenario CRM40_Basis620(ABAP proxy client)->XI->File.
    XI:
    The sender communication channel is a XI adapter (Parameters: HTTP 1.0, XI 3.0, Integration Server, Security profile unchecked, Security level - HTTP).
    CRM:
    The proxy generation is ok.
    SLDCHECK is ok.
    All RFC destinations are ok.
    APPINT_200_620 for CRM was installed and configured well (I think so, but...).
    When I ran the ABAP proxy client on CRM, sxmb_moni(CRM) returned the text for the XML Message (Display-CallIntegrationServer-Payloads-TraceDocument):
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <SAP:TraceHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
      <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="1" type="T">system-ID = EST</Trace>
      <Trace level="1" type="T">client = 300</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = BABKIN_RA</Trace>
      <Trace level="1" type="Timestamp">2007-08-06T13:55:12Z</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = DC4424A659314CF18F500002A541D0E7</Trace>
      <Trace level="1" type="T">PLNAME = SENDER</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline = SENDER</Trace>
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_SENDER</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTS0004</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline SENDER</Trace>
      <Trace level="1" type="T">system-ID = EST</Trace>
      <Trace level="1" type="T">client = 300</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = BABKIN_RA</Trace>
      <Trace level="1" type="Timestamp">2007-08-06T13:55:12Z</Trace>
      <Trace level="1" type="T">----
    </Trace>
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC">
      <Trace level="1" type="T">Get definition of pipeline PID= SENDER</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
    - <Trace level="1" type="B" name="PLSRV_CALL_INTEGRATION_SERVER">
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-ENTER_PLSRV">
      <Trace level="1" type="T">URL for integration server read from global configuration</Trace>
      <Trace level="1" type="T">URL= http://SRMDEV.oao.sng:8011/sap/xi/engine?type=entry</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_TECHNICAL_ROUTING_PROPERTY" />
    - <Trace level="1" type="B" name="CL_XMS_PLSRV_CALL_XMB-CALL_XMS_HTTP">
      <Trace level="1" type="System_Error">HTTP-client: error response= <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"> <SOAP:Header> </SOAP:Header> <SOAP:Body> <SOAP:Fault xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>SOAP:Client</faultcode><faultstring>Error during conversion of XI message</faultstring><faultactor>http://sap.com/xi/XI/Message/30</faultactor><detail><SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1"><SAP:Category>XIServer</SAP:Category><SAP:Code area="SECURITY">INBOUND_SECURE_LEVEL</SAP:Code><SAP:P1>DC4424A659314CF18F500002A541D0E7</SAP:P1><SAP:P2/><SAP:P3>HTTP</SAP:P3><SAP:P4/><SAP:AdditionalText/><SAP:ApplicationFaultMessage namespace=""/><SAP:Stack>Message DC4424A659314CF18F500002A541D0E7 was sent with ''. Channel configuration, however, requires 'HTTP' </SAP:Stack></SAP:Error></detail></SOAP:Fault> </SOAP:Body> </SOAP:Envelope></Trace>
      </Trace>
      <Trace level="1" type="System_Error">Exit XMB because of system error!</Trace>
      <Trace level="1" type="System_Error">System-Error: HTTP.HTTP_STATUS_CODE_NEQ_OK</Trace>
      <Trace level="1" type="System_Error">HTTP status code 500 : Error during conversion of XI message</Trace>
      <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
      </SAP:TraceHeader>
    I think the main problem is the parameter "HTTP Security level" for the channel, but not sure.
    Does anybody know where to find a solution?
    Regards,
    Roman

    Hi Roman
    There is no need for an XI adapter for client proxy.... we only use that for server proxies.
    Vaibhav

  • SOAP--PI--ABAP Proxy-how to call this scenarion from third-party PeopleSoft

    My scenario is:
    Third-party Peoplesoft sending an Asynchronous XML message to PI through SOAP Adapter which will then be processed by ABAP proxy server.
    I have everything in place (SDL,IR,ID & ABAP Proxy). I have created a SOAP tool that uses URL (http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel) and XML message to test the process - it works.
    Now the problem is the Peoplefoft system guys need help to figure out how do they reach our system and this process.
    per my understanding, I created a WSDL using ID>Tools>Define Web Service option and sent it to them hoping they will be able to use this WSDL to program their call to our system.
    I also additionally sent them the SOAP client tool that i use to test the process that has default XML payload in it.
    The only change i made in WSDL before sending to third-party is - replaced location tag from the actual URL that reaches sender SOAP adapter to the external URL that will be used by PeopleSOft system reach our network. I think our network guys are going to map this external url to internal URL.
    Is there anything else i can do as a PI consultant to help Peoplesoft reach our network and hit the SOAP Adapter (SOAP sender adapter channel for my process).
    I will Appreciate any ideas.
    Thanks,
    Saurabh

    As a PI developer, ur only task is to provide the correct wsdl to the Peoplesoft guys. As u have changed the URL, there is nothing else to be done at ur end.
    The SOAP Client user just have to use the wsdl and fill in the data. Before the communication, please make sure that there are no firewall restrictions.
    Regards,
    Prateek

Maybe you are looking for

  • No sound in imovie 11 for a project created in imovie 09

    Hello Everyone, I have a similar, yet different audio issue than what others have posted about in the forums. I have a friend who created a wedding video in iMovie 09 for us, we created the iDVD project, exported, burned, and shipped it to the client

  • Refresh Rate Setting

    I have a LCD monitor that has some weird lines through it when the refresh rate i set to 59.9. When you change it to 75 everything is fine. I was wondering what you can do on a Mac Pro with the ATI Radeon HD 2600 Xt video card in order to get the ref

  • How to generate multiple records on a single sql from dual table

    I wanted to generate ten sequence nos in a single sql statement from dual table. Is there any way to use that. I think somebody can help me on this by using level clause

  • How many special charcters in RSKC

    Hi Guru,s. Could any one tell me, how many special characters  we can enter in RSKC, which have been asked in the interview. Regards. Harry

  • Error when editing Portal User Profiles

    Hi there, I got this error message when editing Portal User Profiles Error: The specified user does not exist. (WWC-41406). I can select users from OID, but can't edit them. Note: these users are imported from AD and placed in a different OU other th