ABAP Proxy and fault messages

I am calling a Outbound proxy (Asynchronous) from R/3. Should I catch fault after the call?
When I don't catch fault, I get the following warning message. What should i do about these warning message?
The exception CX_AI_SYSTEM_FAULT is neither caught nor is it declared in the RAISING clause of "EXECUTE_ASYNCHRONOUS". 
Any ideas?

Hi SSG,
Check this
Proxy framework: Catch CX_AI_SYSTEM_FAULT
cheers
Prashanth
P.S Please mark helpful answers

Similar Messages

ABAP Proxy Exception / Fault Message

Hi All,
I have got a requirement to raise an exception from existing ABAP Proxy depending on condition. XI consultant created a fault messge type and attached to the inbound interface message type. I have regenerated the ABAP proxy but I cant find any thing in excpetion tab to raise exception.
Please let me know the solution for this.
reward points are available.
-Venkat

Hi Venkat,
The following link will guide you ..
http://help.sap.com/saphelp_nw04s/helpdata/en/c9/7a1041ebf0f06fe10000000a1550b0/frameset.htm
I dont think we need to do any changes in Exchange Profile for proxy communication.
Changing the RFC Destinations (in your R/3 system)- LCRSAPRFC & SAPSLDAPI should solve your problem.
Regards,
Sumit

How do ABAP Proxy and XI adapter work?

Hi everybody,
I have a general question about the ABAP proxy and XI adapter.
In order to use the ABAP proxy and XI adapter, I must configure the HTTP Destination between the R/3 system and the XI server. I must also maintain the SLD.
After several hours configurations with our administrator, it failed. At least the HTTP Destinations on both servers don't work correctly. We got always HTTP error message. But a scenario with an ABAP Receiver proxy works! It is really strange and laughable. We're very happy about that but don't know why and what happened. Today we tested the ABAP Sender proxy, it doesn't work.
So we decide to ask the XI experts in this forum to give us a general lessen about the ABAP proxy: how it works, why we should create the HTTP destinations, how do the destinations work and so on.
Thanks a lot in advance!
With best regards
Xiang

Hi
Once you create the interface in XI, you generate the proxies on your R3 system.
Client Proxies -->
This is done for outbound interfaces. You generate the proxy and then write a report that fills in the proxy class with the data and pushes it to XI.
Server proxies -->
Generated for inbound interfaces. Generate the proxy and write the implementation for the exectue method that deals with the data sent from XI to the R3 system
Abap Proxy
ABAP Proxies in XI(Client Proxy)
Smarter Approach for coding ABAP Proxies
The specified item was not found.
ABAP Proxy - XML to ABAP Transformation
http://help.sap.com/saphelp_nw04/helpdata/en/ba/f21a403233dd5fe10000000a155106/frameset.htm
why we should create the HTTP destinations, how do the destinations work and so on.
we create http destiantio because in proxies , adapter is not use so who is goin to send the message to integration server ...by creating http destinatio we create integration engine which send messg to IS . then messg is routed .and all
error in HTTP to file scenario http to file
hope this help's you
Regard's,
Chetan Ahuja

Alert and Fault Message type Usage

Hi All,
I struck to the use of Alert and Fault message type.
(a) Can we use Alert in scenarios without BPM ? If yes where can we use?
(b) Can we use Fault Message Type in scenarios except Proxy ? If yes, how?
Kindly suggest me .
Thanks
Anup

Hi Rabi,
In order to use Alert for your File to File scenario, you need to setup Alert Configuration.
To configure alerts, you need to create the following:
1. Alert Categories in tcode ALRTCATDEF
- Here you need to define the alert message that will be sent once error occured and alert has been triggered. You would need to define here the recipients who will receive email notifications about the error message.
2. Alert Rules in Runtime Workbench
- Here you need to define which alert category you would use based on the rules you set. You can define if the error is in the Integration Engine or in Adapter Engine (for errors in File Communication channels). Also, you need to define condition for the alert by selecting the sender and receiver systems, interfaces that would be involved for the alert.
For further details, you may look the SAP documentation:
http://help.sap.com/saphelp_nwpi711/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm
Regards,
Jenny

How to extract attachment from ABAP proxy and store in archive link....

Hi Experts,
I need to consume an incoming email attachment in the ABAP Proxy program (POP Mail --> PI --> ABAP Proxy) and then store this file in the IBM content management server through the Archvie Link connection.
Any idea how to implement this piece of code in ABAP?
Regards,
Shobhit

Hi Shobhit
You can get the files from Sender Mail adapter. In proxy implement the method of protocol IF_WSPROTOCOL_ATTACHMENTS as said above.
Archive Link supports HTTP, RFC etc depends on the system you are going to use for archiving. For your case you have IBM server i think you have to do HTTP synchronous. This will be like an interface again for you.
Why are you using ERP system in middle. I think you can directly dump data to IBM server.
Thanks
Gaurav

Coding for ABAP Proxy and mapping

Hi XI Ds
which one need coding neither ABAP Proxy nor ABAP Mapping
Thanks

Hi Kushee ,
We need coding for both ABAP Proxy and mapping. We need to know some OO(Object Oreinted) ABAP concepts.
We can also import JAVA CODE for certain functionality.
Check the following websites for clarity:
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
cheers!
gyanaraj

Xws-security and fault messages

Hi,
I have a problem with xws-security and fault messages.
It seems that the security policy is not applied to fault messages. This results in a "javax.xml.rpc.soap.SOAPFaultException: Message does not conform to configured policy: No Security Header found" exception whenever a fault message is thrown.
As a result I can not use any meaningful application-specific fault messages as they violate the security policy. Is this correct? Surely a fault message is a SOAP message just like any other and should have the security policy applied to it as usual, or am i missing something here?
If anyone can shed any light on this i'd really appreciate it.

XWS-Security is not integrated with Sun Java Studio Enterprise. However, if you would like to implement message level security in a web service in the Java Studion Enterprise environment, you may find this article useful:
http://developers.sun.com/prodtech/javatools/jsenterprise/downloads/ea/jse8/reference/techart/security.html
Rico

Abap proxy and java proxy

Hi
Could you plz tell me when should we select ABAP Proxy and when should java proxy ?? Is it like that in SAP systems we use ABAP proxy and non-sap systems we use JAVA proxy ??
Thanks
Kumar

To connect to SAP system with WAS >= 6.4, ABAP proxy is used.

Is it like that in SAP systems we use ABAP proxy and non-sap systems we use JAVA proxy ?? 
Not always. As i mentioned the limitation of ABAP proxy.
Also, Java Proxies cannot be used for any non-SAP application. it is generally used for communication with Java Application
Regards,
Prateek

ABAP Proxy and BPM with message maping

Hi all,
I have a scenario like :
ABAP Client Proxy ( synch )
-> BPM ( to retriggr SOAP call and raise alerts with error and reponse back to Abap client )
-> message mapping
-> SOAP ( synch )
1. What can be the issues with this scenario ?
2. How can I return response and excetion back to ABAP client from BPM ?

>
> As per design guidelines for consistent processes -
> we need to do all the error handling and alerts in
> BPM.
You mean you are planning to use a BPM for all Interfaces just because someone told so? Why use a BPM when there is no need for it. If you have a Business Process that demands a BPm then yes use it, but for this sceanrio, you can use Fault messages to propaggate the error back to the R3 system, and use the Xi alerts ( without BPM ) if a runtime error occurs etc.
Is there some Business Process Involved here? What is the exact requirement?
Regards
Bhavesh

Doubt on technical systems and fault message types

Hi,
 I had still doubt & i'm not clear to answers i got yesterday , plz clarify my doubts
 1.what are fault message types and how do we catch any exceptions in file to proxy scenario , can any one give simple example ?
 2.How do we register a non-sap system(FTP SERVER) in SLD ? what steps should we follow? Does any one have blogs regarding this?
 Plz answer to this questions, good answers will be rewarded.

Hi Smitha,
1. what are fault message types and how do we catch any exceptions in file to proxy scenario , can any one give simple example
Fault Message are Msg type that provided whenever u create a namespace..they are usually used to get the exception or error mapped which has occured while execution of Application at the sender/receiver end....
One scenario where i had used it from Soap to RFC where i defined the exception in rfc source code at r/3 end...I mapped that exception to Fault msg type that i created of my own type(didnt used the default)..
Refer this for Fault msg usage in Asynch scenarios.
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
Refer this for Fault msg usage in Synch scenarios.
/people/sap.user72/blog/2006/01/16/xi-propagation-of-meaningful-error-information-to-soap-client
Refer this for Handling Exceptions
http://help.sap.com/saphelp_nw04/helpdata/en/33/4a773f12f14a18e10000000a114084/content.htm
2.How do we register a non-sap system(FTP SERVER) in SLD ? what steps should we follow? Does any one have blogs regarding this?
For this you have to define the 3rd Party TS & BS in sld.
Have a look at the following links...
http://help.sap.com/saphelp_nw04s/helpdata/en/fa/0aad3efa11b300e10000000a114084/frameset.htm
Cheers...
Vasu
** REward POints if found useful **

File to Abap Proxy Scenario : No message log in SXMB_MONI

I have a PI Scenario in which a FTP server is polled every 5 minutes, and when it receives any file, file is archieved and abap proxy is called. Few days back it was running perfectly fine. But For last couple of days I am facing strange error.
My File is archived but abap proxy isnot called, neither I get any message in SXMB_MONI.
any guesses what should I do?
Jawed Ali

Hi Jawed,
HOLD means you have given QoS as EOIO in sender channel and the first message got failed and hence all messages are waiting..
Check this thread
Re: PI 7.1 Messages stuck into the Queue of the Adapter Engine
Try resending the messages through runtime workbench->message monitoring->adapter engine
Regards
Suraj

Direct Connection ABAP Proxy and Java Proxy possible ????

Hi Folks ,
As i read as direct connection possible between 2 SAP systems only ..
and also i read as WS Direct Connection u2013 (Java) ..
What it means ?? is it ABAP Proxy to Java Proxy using Direct connection ?? Like Java Client Proxy and ABAP Server proxy
I am not clear on this.. Could you please explain or help me on this . ??
Siva..

Hi ,
+You can do both for java proxies as well Abap proxies.+
As per the following points
1. Point-to-point connection is a new capability available with SAP NW PI 7.1. It allows applications or systems to send messages using WS-RM without going through a middleware, e.g. PI, but still using a centralized tool to design and
configure the interfaces and connection properties.
2. SAP XI 3.0/PI 7.00 or higher releases can be licensed based on the total volume of messages in
gigabytes (GB) that is processed per month. The size of the payload is determined in the integration
server. The information is then aggregated according to sender and receiver system.
Question :
1. If Message exchange between 2 SAP applications using direct connection .. Then dont we need to consider about licencing cost for volume of messages per month ?
2. So if i use ABAP Client Proxy to Java Server proxy scenario.. can i use direct connection ? Eg., SAP ECC to java application ?
In both the cases PI Runtime is not required .. Am i right ?
Please clarify..
Siva..

Wheh to use abap proxy and when to use idoc

Hi All,
Please provide some clarifications for the below points :
What is Sproxy?
2.     Why we are using Sproxy instead of Idocs
3.   When we are going Proxy ?
4.   What are the types of proxy ?
5.   How to Create to Proxy ?
6.   What the Difference between SProxy and Idocs
   7.   What is SOAP file? When we are using SOAP file ?
Thank you.
Regards,
Bharat

Hi Bharat,
You seem to have a range of Questions. I will try and answer as many as possible.
What is Sproxy?
SPROXY is a transaction [T-Code] on the SAP ECC/CRM etc side where you can see the objects designed in SAP PI ESR and develop its corresponding ABAP code. SPROXY T-Code displays the Service Interface. You can read more about it in the following site:
**************** - XI - ABAP Proxy communication
2.     Why we are using Sproxy instead of Idocs
For Certain implementations Standard IDocs may not be available and it is quite tedious to create a Z- IDoC and therefore it is advantageous to use Proxy. You can read more about this doubt in the following links:
Choosing to use IDOC standard or ABAP Proxy?
IDOC vs Proxy
ABAP Proxy Vs IDOC
3. When we are going Proxy ?
When there are no Standard IDocs available. Please refer above links to get an answer for this.
4.   What are the types of proxy ?
5.   How to Create to Proxy ?
Again the following link has the answers for both these questions:
**************** - XI - ABAP Proxy communication
6.   What the Difference between SProxy and Idocs
Difference is in the way the communication happens. Standard Idocs are already provided and you can use them directly while Proxy you will require to write the code on ECC side. You can refer the following link to understand more:
Advantage of ABAP proxy over BAPI
7. What is SOAP file? When we are using SOAP file ?
I have not heard of anything called SOAP file. SOAP is a protocol used for communication and you can send files as attachment in your SOAP to Any(file/idoc/Soap etc) or vice Versa Interfaces. Infact Proxy itself is SOAP based communication with XI 3.0 Protocol.
Please explore SCN to know more about the various scenarios. There are endless possibilities in SAP PI.
Hope this Helps.
Thanks & Regards,
Tejas Bisen

ABAP Proxy and commit issue

Hi,
I want to send data using an ABAP proxy from SAP ECC to PI.
The location where I call the method is in MV50AFZ1 Form uxerexit_delete_document
In my opinion it is not wise to execute a commit work statement in this location. The proxy however needs a commit work to send the data.
I also tried using a CALL FUNCTION ... IN UPDATE TASK. This also doesn't trigger the proxy to send the data.
(and it is not allowed te execute a commit in update task .. .because it's already a "commit".
Is there a way to get this thing working in this way? Or do you always have to program a separate program for sending the data with a proxy??
Thanks
Ron

Hi Ron,
Try submitting a report as a background job from the user exit...and inside this report you can write the code to call the proxy + commit.
*Submit report as job(i.e. in background)
data: jobname like tbtcjob-jobname value
' TRANSFER TRANSLATION'.
data: jobcount like tbtcjob-jobcount,
host like msxxlist-host.
data: begin of starttime.
include structure tbtcstrt.
data: end of starttime.
data: starttimeimmediate like btch0000-char1.
Job open
call function 'JOB_OPEN'
exporting
delanfrep = ' '
jobgroup = ' '
jobname = jobname
sdlstrtdt = sy-datum
sdlstrttm = sy-uzeit
importing
jobcount = jobcount
exceptions
cant_create_job = 01
invalid_job_data = 02
jobname_missing = 03.
if sy-subrc ne 0.
"error processing
endif.
Insert process into job
SUBMIT zreport and return
with p_param1 = 'value'
with p_param2 = 'value'
user sy-uname
via job jobname
number jobcount.
if sy-subrc > 0.
"error processing
endif.
Close job
starttime-sdlstrtdt = sy-datum + 1.
starttime-sdlstrttm = '220000'.
call function 'JOB_CLOSE'
exporting
event_id = starttime-eventid
event_param = starttime-eventparm
event_periodic = starttime-periodic
jobcount = jobcount
jobname = jobname
laststrtdt = starttime-laststrtdt
laststrttm = starttime-laststrttm
prddays = 1
prdhours = 0
prdmins = 0
prdmonths = 0
prdweeks = 0
sdlstrtdt = starttime-sdlstrtdt
sdlstrttm = starttime-sdlstrttm
strtimmed = starttimeimmediate
targetsystem = host
exceptions
cant_start_immediate = 01
invalid_startdate = 02
jobname_missing = 03
job_close_failed = 04
job_nosteps = 05
job_notex = 06
lock_failed = 07
others = 99.
if sy-subrc eq 0.
"error processing
endif.

Regarding mandatory fields, Context Objects and Fault Message Types

Hi All,
1) I am creating a structure with fields "Name", "Street" and "City". While creation i want to make "Name" fields as mandatory. Is it possible. If so how to achieve this.
2) What is the purpose of Context Object and in which situation we will use this.
3) What is the purpose of Fault Message Types and in which situation we will use this.
4) I am doing file to file scenario, at sender side i have set the adapter as file and transport protocol as "FTP" . It is asking for "Server", "PORT" and "Login Details". What is this FTP, for this do i need to take any login details. I am totally not aware of FTP, could please explain more about this.
Kindly look into the above points and respond point by point.
Thanks in advance.
Regards,
Prem.S

Hi prem,
1) I am creating a structure with fields "Name", "Street" and "City". While creation i want to make "Name" fields as mandatory. Is it possible. If so how to achieve this.
give occurence 1..unbounded. for the field name.
2) What is the purpose of Context Object and in which situation we will use this.
If u have multiple receiver system then to determine the reciever u can use context object.....
the alternative of context objetc is X-Path...
Check out these
http://help.sap.com/saphelp_nw2004s/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/content.htm
/people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
Here is a scenario where context objects were used for BPM
Technical Context Object in ccBPM
Get the details here:
http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/frameset.htm
Technical Context Objects :
http://help.sap.com/saphelp_nw04/helpdata/en/d6/e44fcf98baa24a9686a7643a33f26f/frameset.htm
A list of the Technical Context Objects names can be found here:
http://help.sap.com/saphelp_nw04/helpdata/en/6e/ff0bf75772457b863ef5d99bc92404/content.htm
Difference between context object and x-path:
diff between context object and x path
3) What is the purpose of Fault Message Types and in which situation we will use this
whenever u want to catch some exception u can use fault message types.Just for a example u r sending some data to SAP system.But due to some reason the R/3 system is down.so in this case if u have implemented fault message ..u can get a error message specifying r/3 is down....
Fault message implementation.
/people/shabarish.vijayakumar/blog/2006/11/02/fault-message-types--a-demo-part-1
How to Guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40574601-ec97-2910-3cba-a0fdc10f4dce
4) I am doing file to file scenario, at sender side i have set the adapter as file and transport protocol as "FTP" . It is asking for "Server", "PORT" and "Login Details". What is this FTP, for this do i need to take any login details. I am totally not aware of FTP, could please explain more about this.
there are two transport protocol for File adapter
1)FTP(File transfer protocol)
to know abt FTP check here
http://help.sap.com/saphelp_nw04/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/content.htm
2)NFS(Network File System)
in server :Enter the host name or IP address of the FTP server.
in PORT:Specify the port number of the FTP server.
The default is the standard port for the FTP server (21)
check here
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Regards
BILL
***reward with points if ity helps u!!

ABAP Proxy and fault messages

Similar Messages

Maybe you are looking for